- Title
- An investigation into the feasibility of incorporating ketoconazole into solid lipid microparticles
- Creator
- Jhundoo, Henusha Devi
- ThesisAdvisor
- Walker, Roderick B
- Date
- 2015
- Type
- text
- Type
- Thesis
- Type
- Masters
- Type
- MPharm
- Identifier
- http://hdl.handle.net/10962/54701
- Identifier
- vital:26601
- Description
- One of the major challenges of the oral administration of ketoconazole (KTZ), an inhibitor of sterol 14α demethylase, used in the management of systemic and topical mycoses in immuno-compromised and paediatric patients is the lack of availability of liquid dosage forms. In order to overcome this challenge, extemporaneous preparations have been manufactured by care-givers and health care providers by crushing or breaking solid oral dosage forms of KTZ and mixing with a vehicle to produce a liquid dosage form that can be swallowed by patients. However, the use of extemporaneous preparations may lead to under or over-dosing if the care-givers are not guided accordingly. Furthermore, the dearth of information on the stability of these KTZ-containing extemporaneous preparations may lead to ineffective antifungal therapy and complicate the problems of resistance as it is difficult to estimate the shelf-lives of these extemporaneous products under varying storage conditions due to the susceptibility of KTZ to chemical degradation. Therefore, there is a need for formulation scientists to develop novel drug delivery systems that avoid the need for extemporaneous preparations, possess well-established limits of stability and minimize the risks of systemic adverse effects to facilitate KTZ therapy. The use of solid lipid microparticles (SLM) as potential carriers for the oral administration of KTZ was investigated since solid lipid carriers are known to exhibit the advantages of traditional colloidal carriers. The research undertaken in these studies aimed to investigate the feasibility of developing and manufacturing solid lipid microparticles (SLM), using a simple micro-emulsion technique, as a carrier for KTZ. Prior to pre-formulation, formulation development and optimization studies of KTZ-loaded SLM, it was necessary to develop and validate an analytical method for the in vitro quantitation and characterization of KTZ in aqueous dispersions of SLM during development and assessment studies. An accurate, precise, specific and sensitive reversed-phase high performance liquid chromatographic (RP-HPLC) method coupled with UV detection at 206 nm was developed, optimized and validated for the analysis of KTZ in formulations. Formulation development studies were preceded by solubility studies of KTZ in different lipids. Labrafil® M2130 CS was found to exhibit the best solubilising potential for KTZ. Pre-formulation studies were also designed to determine the polymorphic behavior and the crystallinity of KTZ and Labrafil® M2130 CS that was used for subsequent manufacture of the solid lipid carriers. DSC and FTIR studies revealed that there were no changes in the crystallinity of KTZ or Labrafil® M2130 CS following exposure to a temperature of 60°C for 1 hour. In addition the potential for physicochemical interaction of KTZ with the lipid Labrafil® M2130 CS was investigated using DSC and FTIR and the results revealed that KTZ was molecularly dispersed in Labrafil® M2130 CS and that it is unlikely that KTZ would interact with the lipid. It was therefore established that KTZ and Labrafil® M2130 CS were thermo-stable at a temperature of 60°C and thus a micro-emulsion technique could be used to manufacture the KTZ-loaded SLM. Drug-free and KTZ-loaded SLM were prepared using a modified micro-emulsion technique that required the use of an Ultra-Turrax® homogenizer set at 24 000 rpm for 5 minutes followed by the use of the Erweka GmbH homogenizer. SLM were characterized in terms of particle size (PS), zeta potential (ZP), shape and surface morphology using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). In addition drug loading capacity (DLC) and encapsulation efficiency (EE) of SLM for KTZ were assessed using RP-HPLC. Formulation development and optimization studies of KTZ-loaded SLM were initially aimed at selecting an emulsifying system that was able to stabilize the SLM in an aqueous dispersion. Successful formulations were selected based on their ability to remain physically stable on the day of manufacture. Pluronic® F68 used in combination with Lutrol® E40, Soluphor® P, Soluplus® produced unstable dispersions on the day of manufacture and these combinations were not investigated further. However, the formulation of a stable KTZ-loaded SLM dispersion was accomplished by use of a combination of Pluronic® F68, Tween 80 and sodium cholate as the surfactant system. Increasing amounts of Labrafil® M2130 CS resulted in the production of particles with low DLC and EE, a large PS and a relatively unchanged ZP. An optimum concentration of 10% w/v Labrafil® M2130 CS was selected to manufacture the KTZ-loaded SLM. Studies to determine the influence of KTZ loading on the quality of SLM revealed that concentrations of KTZ > 5% w/v led to a reduction in DLC and EE and an increase in PS with minimal impact on the ZP. Stability studies conducted at 25°C/65% RH and 40°C/75% RH for up to 30 days following manufacture revealed that batch SLM 15 manufactured using 10% w/v Labrafil® M2130 CS, 5% w/v KTZ and a combination of 4% w/v Pluronic® F-68, 2% w/v Tween 80 and 1% w/v sodium cholate produced the most stable dosage form when stored at 25°C/65% RH for up to 30 days. However, storage at 40°C/75% RH resulted in instability of the formulation. An aqueous dispersion of KTZ-loaded SLM has been developed and assessed and may offer an alternative to extemporaneous preparations used for KTZ therapy in paediatric and immuno-compromised patients.
- Format
- 221 leaves, pdf
- Publisher
- Rhodes University, Faculty of Pharmacy, Pharmacy
- Language
- English
- Rights
- Jhundoo, Henusha Devi
- Hits: 2336
- Visitors: 2607
- Downloads: 353
Collections
RU Department of Pharmacy
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | CHAPTER 1 | 2 MB | Adobe Acrobat PDF | View Details Download |