Electrocatalytic activity of bimetallic Au–Pd nanoparticles in the presence of cobalt tetraaminophthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189719 , vital:44925 , xlink:href="https://doi.org/10.1016/j.jcis.2014.10.056"
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 lA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 lA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 lM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine.
- Full Text:
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189719 , vital:44925 , xlink:href="https://doi.org/10.1016/j.jcis.2014.10.056"
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 lA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 lA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 lM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine.
- Full Text:
Electrode surface modification using metallophthalocyanines and metal nanoparticles : electrocatalytic activity
- Authors: Maringa, Audacity
- Date: 2015
- Subjects: Phthalocyanines , Nanoparticles , Electrocatalysis , Scanning electron microscopy , X-ray photoelectron spectroscopy , Electrochemistry , Scanning electrochemical microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4541 , http://hdl.handle.net/10962/d1017921
- Description: Metallophthalocyanines and metal nanoparticles were successfully synthesized and applied for the electrooxidation of amitrole, nitrite and hydrazine individually or when employed together. The synthesized materials were characterized using the following techniques: predominantly scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning electrochemical microscopy (SECM). Different electrode modification methods were used to modify the glassy carbon substrates. The methods include adsorption, electrodeposition, electropolymerization and click chemistry. Modifying the glassy carbon substrate with MPc (electropolymerization) followed by metal nanoparticles (electrodeposition) or vice versa, made a hybrid modified surface that had efficient electron transfer. This was confirmed by electrochemical impedance studies with voltammetry measurements having lower detection potentials for the analytes. This work also describes for the first time the micropatterning of the glassy carbon substrate using the SECM tip. The substrate was electrografted with 4-azidobenzenediazonium salt and then the click reaction was performed using ethynylferrocene facilitated by Cu⁺ produced at the SECM tip. The SECM imaging was then used to show the clicked spot.
- Full Text:
- Authors: Maringa, Audacity
- Date: 2015
- Subjects: Phthalocyanines , Nanoparticles , Electrocatalysis , Scanning electron microscopy , X-ray photoelectron spectroscopy , Electrochemistry , Scanning electrochemical microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4541 , http://hdl.handle.net/10962/d1017921
- Description: Metallophthalocyanines and metal nanoparticles were successfully synthesized and applied for the electrooxidation of amitrole, nitrite and hydrazine individually or when employed together. The synthesized materials were characterized using the following techniques: predominantly scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning electrochemical microscopy (SECM). Different electrode modification methods were used to modify the glassy carbon substrates. The methods include adsorption, electrodeposition, electropolymerization and click chemistry. Modifying the glassy carbon substrate with MPc (electropolymerization) followed by metal nanoparticles (electrodeposition) or vice versa, made a hybrid modified surface that had efficient electron transfer. This was confirmed by electrochemical impedance studies with voltammetry measurements having lower detection potentials for the analytes. This work also describes for the first time the micropatterning of the glassy carbon substrate using the SECM tip. The substrate was electrografted with 4-azidobenzenediazonium salt and then the click reaction was performed using ethynylferrocene facilitated by Cu⁺ produced at the SECM tip. The SECM imaging was then used to show the clicked spot.
- Full Text:
Behavior of palladium nanoparticles in the absence or presence of cobalt tetraaminophthalocyanine for the electrooxidation of hydrazine
- Maringa, Audacity, Nyokong, Tebello
- Authors: Maringa, Audacity , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189796 , vital:44932 , xlink:href="https://doi.org/10.1002/elan.201400028"
- Description: We report on the electrodeposition of palladium nanoparticles (PdNPs) on a glassy carbon electrode (GCE) and onto a poly-CoTAPc-GCE (CoTAPc=cobalt tetraamino phthalocyanine) surface. The electrodes are denoted as PdNPs-GCE and PdNPs/poly-CoTAPc-GCE, respectively. PdNPs/poly-CoTAPc-GCE showed the best activity for the oxidation of hydrazine at the lowest potential of −0.28 V and with the highest currents. The results were further supported by electrochemical impedance spectroscopy (EIS) which showed that there was less resistance to charge transfer for PdNPs/poly-CoTAPc-GCE compared to PdNPs-GCE. The catalytic rate constant for hydrazine oxidation was 6.12×108 cm3 mol−1 s−1 using PdNPs/poly-CoTAPc-GCE.
- Full Text:
- Authors: Maringa, Audacity , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189796 , vital:44932 , xlink:href="https://doi.org/10.1002/elan.201400028"
- Description: We report on the electrodeposition of palladium nanoparticles (PdNPs) on a glassy carbon electrode (GCE) and onto a poly-CoTAPc-GCE (CoTAPc=cobalt tetraamino phthalocyanine) surface. The electrodes are denoted as PdNPs-GCE and PdNPs/poly-CoTAPc-GCE, respectively. PdNPs/poly-CoTAPc-GCE showed the best activity for the oxidation of hydrazine at the lowest potential of −0.28 V and with the highest currents. The results were further supported by electrochemical impedance spectroscopy (EIS) which showed that there was less resistance to charge transfer for PdNPs/poly-CoTAPc-GCE compared to PdNPs-GCE. The catalytic rate constant for hydrazine oxidation was 6.12×108 cm3 mol−1 s−1 using PdNPs/poly-CoTAPc-GCE.
- Full Text:
Behavior of Palladium Nanoparticles in the Absence or Presence of Cobalt Tetraaminophthalocyanine for the Electrooxidation of Hydrazine
- Maringa, Audacity, Nyokong, Tebello
- Authors: Maringa, Audacity , Nyokong, Tebello
- Date: 2014
- Language: English
- Type: Article
- Identifier: vital:7305 , http://hdl.handle.net/10962/d1020382
- Description: We report on the electrodeposition of palladium nanoparticles (PdNPs) on a glassy carbon electrode (GCE) and onto a poly-CoTAPc-GCE (CoTAPc=cobalt tetraamino phthalocyanine) surface. The electrodes are denoted as PdNPs-GCE and PdNPs/poly-CoTAPc-GCE, respectively. PdNPs/poly-CoTAPc-GCE showed the best activity for the oxidation of hydrazine at the lowest potential of −0.28 V and with the highest currents. The results were further supported by electrochemical impedance spectroscopy (EIS) which showed that there was less resistance to charge transfer for PdNPs/poly-CoTAPc-GCE compared to PdNPs-GCE. The catalytic rate constant for hydrazine oxidation was 6.12×108 cm3 mol−1 s−1 using PdNPs/poly-CoTAPc-GCE. , Original publication is available at http://dx.doi.org/10.1002/elan.201400028
- Full Text: false
- Authors: Maringa, Audacity , Nyokong, Tebello
- Date: 2014
- Language: English
- Type: Article
- Identifier: vital:7305 , http://hdl.handle.net/10962/d1020382
- Description: We report on the electrodeposition of palladium nanoparticles (PdNPs) on a glassy carbon electrode (GCE) and onto a poly-CoTAPc-GCE (CoTAPc=cobalt tetraamino phthalocyanine) surface. The electrodes are denoted as PdNPs-GCE and PdNPs/poly-CoTAPc-GCE, respectively. PdNPs/poly-CoTAPc-GCE showed the best activity for the oxidation of hydrazine at the lowest potential of −0.28 V and with the highest currents. The results were further supported by electrochemical impedance spectroscopy (EIS) which showed that there was less resistance to charge transfer for PdNPs/poly-CoTAPc-GCE compared to PdNPs-GCE. The catalytic rate constant for hydrazine oxidation was 6.12×108 cm3 mol−1 s−1 using PdNPs/poly-CoTAPc-GCE. , Original publication is available at http://dx.doi.org/10.1002/elan.201400028
- Full Text: false
Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193892 , vital:45403 , xlink:href="https://doi.org/10.1016/j.electacta.2014.09.011"
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine.
- Full Text:
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193892 , vital:45403 , xlink:href="https://doi.org/10.1016/j.electacta.2014.09.011"
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine.
- Full Text:
Electrochemical behaviour of gold nanoparticles and Co tetraaminophthalocyanine on glassy carbon electrode
- Maringa, Audacity, Antunes, Edith M, Nyokong, Tebello
- Authors: Maringa, Audacity , Antunes, Edith M , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241573 , vital:50951 , xlink:href="https://doi.org/10.1016/j.electacta.2013.12.132"
- Description: We report on the electrodeposition of gold nanoparticles (AuNPs) onto the glassy carbon electrode (GCE) followed by polymerization of cobalt tetraamino phthalocyanine (CoPc(NH2)4) on top (represented as poly-CoPc(NH2)4-/AuNPs-GCE). The modified electrode where CoPc(NH2)4 is polymerized first followed by deposition of AuNPs is represented as AuNPs/poly-CoPc(NH2)4-GCE. In the absence of AuNPs, the electrode is represented as poly-CoPc(NH2)4-GCE or for AuNPs alone (AuNPs-GCE). The surface coverage was 1.5 × 10−9 mol cm−2 for AuNPs-GCE and 3.0 × 10−9 mol cm−2 for the rest of the modified electrodes. AuNPs/CoPc(NH2)4-GCE exhibited high electrocatalytic activity towards the oxidation of nitrite, with detection potential of 0.76 V. The catalytic rate constant of 3.96 × 107 cm3 mol−1 s−1 was obtained for nitrite oxidation.
- Full Text:
- Authors: Maringa, Audacity , Antunes, Edith M , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241573 , vital:50951 , xlink:href="https://doi.org/10.1016/j.electacta.2013.12.132"
- Description: We report on the electrodeposition of gold nanoparticles (AuNPs) onto the glassy carbon electrode (GCE) followed by polymerization of cobalt tetraamino phthalocyanine (CoPc(NH2)4) on top (represented as poly-CoPc(NH2)4-/AuNPs-GCE). The modified electrode where CoPc(NH2)4 is polymerized first followed by deposition of AuNPs is represented as AuNPs/poly-CoPc(NH2)4-GCE. In the absence of AuNPs, the electrode is represented as poly-CoPc(NH2)4-GCE or for AuNPs alone (AuNPs-GCE). The surface coverage was 1.5 × 10−9 mol cm−2 for AuNPs-GCE and 3.0 × 10−9 mol cm−2 for the rest of the modified electrodes. AuNPs/CoPc(NH2)4-GCE exhibited high electrocatalytic activity towards the oxidation of nitrite, with detection potential of 0.76 V. The catalytic rate constant of 3.96 × 107 cm3 mol−1 s−1 was obtained for nitrite oxidation.
- Full Text:
The influence of gold nanoparticles on the electroactivity of nickel tetrasulfonated phthalocyanine
- Maringa, Audacity, Nyokong, Tebello
- Authors: Maringa, Audacity , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189774 , vital:44930 , xlink:href="https://doi.org/10.1142/S1088424614500333"
- Description: We report on the electrodeposition of gold nanoparticles (AuNPs) on a glassy carbon electrode (GCE) followed by deposition of nickel tetrasulfonated phthalocyanine (NiTSPc) film by electropolymerization (poly-NiTSPc-GCE) to form Poly-NiTSPc/AuNPs-GCE. The presence of the gold nanoparticles caused a lowering of the anodic and cathodic peak separation (ΔEp) of ferricyanide from 126 mV on poly-NiTSPc to 110 mV on poly-NiTSPc/AuNPs. The electrooxidation of nitrite improved on modified electrodes compared to GCE, with the latter giving Ep = 0.78 V and the modified electrodes gave Ep = 0.62 V or 0.61 V. Poly-NiTSPc/AuNPs-GCE had higher currents compared to poly-NiTSPc-GCE. This indicates the enhancement effect caused by the AuNPs. Electrochemical impedance spectroscopy and chronoamperometric studies also showed that poly-NiTSPc/AuNPs-GCE was a better electrocatalyst than poly-NiTSPc-GCE or AuNPs-GCE.
- Full Text:
- Authors: Maringa, Audacity , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189774 , vital:44930 , xlink:href="https://doi.org/10.1142/S1088424614500333"
- Description: We report on the electrodeposition of gold nanoparticles (AuNPs) on a glassy carbon electrode (GCE) followed by deposition of nickel tetrasulfonated phthalocyanine (NiTSPc) film by electropolymerization (poly-NiTSPc-GCE) to form Poly-NiTSPc/AuNPs-GCE. The presence of the gold nanoparticles caused a lowering of the anodic and cathodic peak separation (ΔEp) of ferricyanide from 126 mV on poly-NiTSPc to 110 mV on poly-NiTSPc/AuNPs. The electrooxidation of nitrite improved on modified electrodes compared to GCE, with the latter giving Ep = 0.78 V and the modified electrodes gave Ep = 0.62 V or 0.61 V. Poly-NiTSPc/AuNPs-GCE had higher currents compared to poly-NiTSPc-GCE. This indicates the enhancement effect caused by the AuNPs. Electrochemical impedance spectroscopy and chronoamperometric studies also showed that poly-NiTSPc/AuNPs-GCE was a better electrocatalyst than poly-NiTSPc-GCE or AuNPs-GCE.
- Full Text:
Characterization and electrocatalytic behaviour of glassy carbon electrode modified with nickel nanoparticles towards amitrole detection
- Maringa, Audacity, Mugadza, Tawanda, Antunes, Edith M, Nyokong, Tebello
- Authors: Maringa, Audacity , Mugadza, Tawanda , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241793 , vital:50970 , xlink:href="https://doi.org/10.1016/j.jelechem.2013.04.022"
- Description: We report on the synthesis of Ni nanoparticles (NiNPs) and their application in electrocatalysis in comparison with nickel phthalocyanine (NiPc). UV–vis spectroscopy, powder X-ray diffraction, transmission electron microscopy and electron paramagnetic resonance were used in the characterization of NiNPs. Cyclic voltammetry and electrochemical impedance spectroscopy were used in electrocatalytic studies of amitrole on the glassy carbon electrode modified with NiNPs. The apparent and catalytic rate constants for amitrole on the NiNP-GCE were found to be 2.58 × 10−5 cm s−1 and 1.11 × 103 M−1 s−1, respectively.
- Full Text:
- Authors: Maringa, Audacity , Mugadza, Tawanda , Antunes, Edith M , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241793 , vital:50970 , xlink:href="https://doi.org/10.1016/j.jelechem.2013.04.022"
- Description: We report on the synthesis of Ni nanoparticles (NiNPs) and their application in electrocatalysis in comparison with nickel phthalocyanine (NiPc). UV–vis spectroscopy, powder X-ray diffraction, transmission electron microscopy and electron paramagnetic resonance were used in the characterization of NiNPs. Cyclic voltammetry and electrochemical impedance spectroscopy were used in electrocatalytic studies of amitrole on the glassy carbon electrode modified with NiNPs. The apparent and catalytic rate constants for amitrole on the NiNP-GCE were found to be 2.58 × 10−5 cm s−1 and 1.11 × 103 M−1 s−1, respectively.
- Full Text:
Surface patterning using scanning electrochemical microscopy to locally trigger a “click” chemistry reaction
- Quinton, Damien, Maringa, Audacity, Griveau, Sophie, Nyokong, Tebello, Bedioui, Fethi
- Authors: Quinton, Damien , Maringa, Audacity , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241805 , vital:50971 , xlink:href="https://doi.org/10.1016/j.elecom.2013.03.021"
- Description: We report on the surface micropatterning of conductive surfaces via the electrochemical triggering of a click reaction, the copper(I) catalyzed azide–alkyne cycloaddition reaction (CuAAC) by SECM via a two-step approach: (i) functionalization on the entire surface with azido-aryl groups by using the diazonium approach followed by (ii) the covalent linkage of alkyne-bearing ferrocene by CuAAC within a local area by SECM. More precisely, the click reaction was triggered by Cu(I) catalyst generation for 30 min at the SECM tip positioned ≈ 10 μm above the azido-aryl modified surface. The dimension of the spot obtained under these conditions was ≈ 75 μm. The electrochemical imaging by SECM of the ultra thin area locally clicked with ferrocene moieties was made thanks to the electrocatalytic properties of the ferrocene modified surface towards ferrocyanide electrooxidation. This local clicking procedure opens the gate to further controlled functionalization of restricted small substrates.
- Full Text:
- Authors: Quinton, Damien , Maringa, Audacity , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241805 , vital:50971 , xlink:href="https://doi.org/10.1016/j.elecom.2013.03.021"
- Description: We report on the surface micropatterning of conductive surfaces via the electrochemical triggering of a click reaction, the copper(I) catalyzed azide–alkyne cycloaddition reaction (CuAAC) by SECM via a two-step approach: (i) functionalization on the entire surface with azido-aryl groups by using the diazonium approach followed by (ii) the covalent linkage of alkyne-bearing ferrocene by CuAAC within a local area by SECM. More precisely, the click reaction was triggered by Cu(I) catalyst generation for 30 min at the SECM tip positioned ≈ 10 μm above the azido-aryl modified surface. The dimension of the spot obtained under these conditions was ≈ 75 μm. The electrochemical imaging by SECM of the ultra thin area locally clicked with ferrocene moieties was made thanks to the electrocatalytic properties of the ferrocene modified surface towards ferrocyanide electrooxidation. This local clicking procedure opens the gate to further controlled functionalization of restricted small substrates.
- Full Text:
Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
Electrocatalytic activity of bimetallic Au–Pd nanoparticles in the presence of cobalt tetraaminophthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7245 , http://hdl.handle.net/10962/d1020250
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 μA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 μA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 μM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.jcis.2014.10.056
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7245 , http://hdl.handle.net/10962/d1020250
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 μA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 μA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 μM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.jcis.2014.10.056
- Full Text: false
Electrochemical behaviour of gold nanoparticles and Co tetraaminophthalocyanine on glassy carbon electrode
- Maringa, Audacity, Antunes, Edith M, Nyokong, Tebello
- Authors: Maringa, Audacity , Antunes, Edith M , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7306 , http://hdl.handle.net/10962/d1020383
- Description: We report on the electrodeposition of gold nanoparticles (AuNPs) onto the glassy carbon electrode (GCE) followed by polymerization of cobalt tetraamino phthalocyanine (CoPc(NH2)4) on top (represented as poly-CoPc(NH2)4-/AuNPs-GCE). The modified electrode where CoPc(NH2)4 is polymerized first followed by deposition of AuNPs is represented as AuNPs/poly-CoPc(NH2)4-GCE. In the absence of AuNPs, the electrode is represented as poly-CoPc(NH2)4-GCE or for AuNPs alone (AuNPs-GCE). The surface coverage was 1.5 × 10−9 mol cm−2 for AuNPs-GCE and 3.0 × 10−9 mol cm−2 for the rest of the modified electrodes. AuNPs/CoPc(NH2)4-GCE exhibited high electrocatalytic activity towards the oxidation of nitrite, with detection potential of 0.76 V. The catalytic rate constant of 3.96 × 107 cm3 mol−1 s−1 was obtained for nitrite oxidation. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2013.12.132
- Full Text: false
- Authors: Maringa, Audacity , Antunes, Edith M , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7306 , http://hdl.handle.net/10962/d1020383
- Description: We report on the electrodeposition of gold nanoparticles (AuNPs) onto the glassy carbon electrode (GCE) followed by polymerization of cobalt tetraamino phthalocyanine (CoPc(NH2)4) on top (represented as poly-CoPc(NH2)4-/AuNPs-GCE). The modified electrode where CoPc(NH2)4 is polymerized first followed by deposition of AuNPs is represented as AuNPs/poly-CoPc(NH2)4-GCE. In the absence of AuNPs, the electrode is represented as poly-CoPc(NH2)4-GCE or for AuNPs alone (AuNPs-GCE). The surface coverage was 1.5 × 10−9 mol cm−2 for AuNPs-GCE and 3.0 × 10−9 mol cm−2 for the rest of the modified electrodes. AuNPs/CoPc(NH2)4-GCE exhibited high electrocatalytic activity towards the oxidation of nitrite, with detection potential of 0.76 V. The catalytic rate constant of 3.96 × 107 cm3 mol−1 s−1 was obtained for nitrite oxidation. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2013.12.132
- Full Text: false
Surface patterning using scanning electrochemical microscopy to locally trigger a “click” chemistry reaction
- Quinton, Damien, Maringa, Audacity, Griveau, Sophie, Nyokong, Tebello, Bedioui, Fethi
- Authors: Quinton, Damien , Maringa, Audacity , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Language: English
- Type: Article
- Identifier: vital:7331 , http://hdl.handle.net/10962/d1020592
- Description: We report on the surface micropatterning of conductive surfaces via the electrochemical triggering of a click reaction, the copper(I) catalyzed azide–alkyne cycloaddition reaction (CuAAC) by SECM via a two-step approach: (i) functionalization on the entire surface with azido-aryl groups by using the diazonium approach followed by (ii) the covalent linkage of alkyne-bearing ferrocene by CuAAC within a local area by SECM. More precisely, the click reaction was triggered by Cu(I) catalyst generation for 30 min at the SECM tip positioned ≈ 10 μm above the azido-aryl modified surface. The dimension of the spot obtained under these conditions was ≈ 75 μm. The electrochemical imaging by SECM of the ultra thin area locally clicked with ferrocene moieties was made thanks to the electrocatalytic properties of the ferrocene modified surface towards ferrocyanide electrooxidation. This local clicking procedure opens the gate to further controlled functionalization of restricted small substrates. , Original publication is available at http://dx.doi.org/10.1016/j.elecom.2013.03.021
- Full Text: false
- Authors: Quinton, Damien , Maringa, Audacity , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Language: English
- Type: Article
- Identifier: vital:7331 , http://hdl.handle.net/10962/d1020592
- Description: We report on the surface micropatterning of conductive surfaces via the electrochemical triggering of a click reaction, the copper(I) catalyzed azide–alkyne cycloaddition reaction (CuAAC) by SECM via a two-step approach: (i) functionalization on the entire surface with azido-aryl groups by using the diazonium approach followed by (ii) the covalent linkage of alkyne-bearing ferrocene by CuAAC within a local area by SECM. More precisely, the click reaction was triggered by Cu(I) catalyst generation for 30 min at the SECM tip positioned ≈ 10 μm above the azido-aryl modified surface. The dimension of the spot obtained under these conditions was ≈ 75 μm. The electrochemical imaging by SECM of the ultra thin area locally clicked with ferrocene moieties was made thanks to the electrocatalytic properties of the ferrocene modified surface towards ferrocyanide electrooxidation. This local clicking procedure opens the gate to further controlled functionalization of restricted small substrates. , Original publication is available at http://dx.doi.org/10.1016/j.elecom.2013.03.021
- Full Text: false
- «
- ‹
- 1
- ›
- »