Electrocatalytic oxidation and detection of hydrazine at gold electrode modified with iron phthalocyanine complex linked to mercaptopyridine self-assembled monolayer
- Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286065 , vital:56235 , xlink:href="https://doi.org/10.1016/j.talanta.2005.02.030"
- Description: Electrocatalytic oxidation and detection of hydrazine in pH 7.0 conditions were studied by using gold electrode modified with self-assembled monolayer (SAM) films of iron phthalocyanine (FePc) complex axially ligated to a preformed 4-mercaptopyridine SAMs. The anodic oxidation of hydrazine in neutral pH conditions with FePc-linked-mercaptopyridine-SAM-modified gold electrode occurred at low overpotential (0.35 V versus Ag|AgCl) and the treatment of the voltammetric data showed that it was a pure diffusion-controlled reaction with the involvement of one electron in the rate-determining step. The mechanism for the interaction of hydrazine with the FePc-SAM is proposed to involve the Fe(III)Pc/Fe(II)Pc redox process. Using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), hydrazine was detected over a linear concentration range of 1.3 × 10−5 to 9.2 × 10−5 mol/L with low limits of detection (ca. 5 and 11 μM for OSWV and CV, respectively). At concentrations higher than 1.2 × 10−4 mol/L the anodic peak potential shifted to 0.40 V (versus Ag|AgCl), and this was interpreted to be due to kinetic limitations resulting from the saturation of hydrazine and its oxidation products onto the redox-active monolayer film. This type of metallophthalocyanine-SAM-based electrode is a highly promising electrochemical sensor given its ease of fabrication, good catalytic activity, stability, sensitivity and simplicity.
- Full Text:
- Date Issued: 2005
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286065 , vital:56235 , xlink:href="https://doi.org/10.1016/j.talanta.2005.02.030"
- Description: Electrocatalytic oxidation and detection of hydrazine in pH 7.0 conditions were studied by using gold electrode modified with self-assembled monolayer (SAM) films of iron phthalocyanine (FePc) complex axially ligated to a preformed 4-mercaptopyridine SAMs. The anodic oxidation of hydrazine in neutral pH conditions with FePc-linked-mercaptopyridine-SAM-modified gold electrode occurred at low overpotential (0.35 V versus Ag|AgCl) and the treatment of the voltammetric data showed that it was a pure diffusion-controlled reaction with the involvement of one electron in the rate-determining step. The mechanism for the interaction of hydrazine with the FePc-SAM is proposed to involve the Fe(III)Pc/Fe(II)Pc redox process. Using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), hydrazine was detected over a linear concentration range of 1.3 × 10−5 to 9.2 × 10−5 mol/L with low limits of detection (ca. 5 and 11 μM for OSWV and CV, respectively). At concentrations higher than 1.2 × 10−4 mol/L the anodic peak potential shifted to 0.40 V (versus Ag|AgCl), and this was interpreted to be due to kinetic limitations resulting from the saturation of hydrazine and its oxidation products onto the redox-active monolayer film. This type of metallophthalocyanine-SAM-based electrode is a highly promising electrochemical sensor given its ease of fabrication, good catalytic activity, stability, sensitivity and simplicity.
- Full Text:
- Date Issued: 2005
Hydrogen peroxide oxidation of 2-chlorophenol and 2, 4, 5-trichlorophenol catalyzed by monomeric and aggregated cobalt tetrasulfophthalocyanine
- Agboola, Bolade, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/289249 , vital:56612 , xlink:href="https://doi.org/10.1016/j.molcata.2004.10.041"
- Description: Cobalt tetrasulfophthalocyanine (CoTSPc) was used to catalyze the oxidation of 2-chlorophenol (2-CP) and 2,4,5-trichlorophenol (TCP) using hydrogen peroxide (H2O2) as the oxidant. This CoTSPc catalyzed hydrogen peroxide oxidation of chlorophenols resulted in the formation of different types of oxidation products depending on the solvent conditions. In water/methanol conditions (where CoTSPc is mainly monomeric, and unionized forms of the phenols), phenol and hydroquinone were the main oxidation products, while in phosphate buffer solutions (pH 7 and 10 for TCP and 2-CP, respectively, where CoTSPc is mainly aggregated, and ionized forms of the phenols), benzoquinone was the main product. In contrast to CoTSPc, other MTSPc complexes studied (AlTSPc, CuTSPc and NiTSPc) exhibited no detectable catalytic effect on the oxidation of chlorophenols under the experimental conditions employed, thus proving the effect of the central metal ions on efficient catalysis of chlorophenol. Reaction pathways are proposed based on the relative time of oxidation products formation.
- Full Text:
- Date Issued: 2005
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/289249 , vital:56612 , xlink:href="https://doi.org/10.1016/j.molcata.2004.10.041"
- Description: Cobalt tetrasulfophthalocyanine (CoTSPc) was used to catalyze the oxidation of 2-chlorophenol (2-CP) and 2,4,5-trichlorophenol (TCP) using hydrogen peroxide (H2O2) as the oxidant. This CoTSPc catalyzed hydrogen peroxide oxidation of chlorophenols resulted in the formation of different types of oxidation products depending on the solvent conditions. In water/methanol conditions (where CoTSPc is mainly monomeric, and unionized forms of the phenols), phenol and hydroquinone were the main oxidation products, while in phosphate buffer solutions (pH 7 and 10 for TCP and 2-CP, respectively, where CoTSPc is mainly aggregated, and ionized forms of the phenols), benzoquinone was the main product. In contrast to CoTSPc, other MTSPc complexes studied (AlTSPc, CuTSPc and NiTSPc) exhibited no detectable catalytic effect on the oxidation of chlorophenols under the experimental conditions employed, thus proving the effect of the central metal ions on efficient catalysis of chlorophenol. Reaction pathways are proposed based on the relative time of oxidation products formation.
- Full Text:
- Date Issued: 2005
Immobilized cobalt (II) phthalocyanine–cobalt (II) porphyrin pentamer at a glassy carbon electrode
- Ozoemena, Kenneth I, Zhao, Zhixin, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Zhao, Zhixin , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/300322 , vital:57916 , xlink:href="https://doi.org/10.1016/j.elecom.2005.04.019"
- Description: This communication describes the electrochemistry of a novel cobalt phthalocyanine–cobalt porphyrin (cobalt(II)phthalocyanine–cobalt(II)tetra(5-phenoxy-10,15,20-triphenylporphyrin)) (CoPc-(CoTPP)4) immobilised onto a glassy carbon electrode (GCE). The GCE-CoPc-(CoTPP)4 displayed high efficiency as a potential amperometric sensor for hydrogen peroxide (H2O2) in neutral and alkaline pH conditions. Electrochemical and electrocatalytic properties of the pentamer seem to depend mostly on the central CoPc, and partly, on the synergistic effect of the CoPc/CoPP units. The GCE-CoPc-(CoTPP)4 showed very fast amperometric response (∼1 s), with linearities up to ⩾1.50 mM, low detection limits (μM range) and stability (8 weeks) towards the amperometric determination of laboratory and medical solutions of H2O2.
- Full Text:
- Date Issued: 2005
- Authors: Ozoemena, Kenneth I , Zhao, Zhixin , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/300322 , vital:57916 , xlink:href="https://doi.org/10.1016/j.elecom.2005.04.019"
- Description: This communication describes the electrochemistry of a novel cobalt phthalocyanine–cobalt porphyrin (cobalt(II)phthalocyanine–cobalt(II)tetra(5-phenoxy-10,15,20-triphenylporphyrin)) (CoPc-(CoTPP)4) immobilised onto a glassy carbon electrode (GCE). The GCE-CoPc-(CoTPP)4 displayed high efficiency as a potential amperometric sensor for hydrogen peroxide (H2O2) in neutral and alkaline pH conditions. Electrochemical and electrocatalytic properties of the pentamer seem to depend mostly on the central CoPc, and partly, on the synergistic effect of the CoPc/CoPP units. The GCE-CoPc-(CoTPP)4 showed very fast amperometric response (∼1 s), with linearities up to ⩾1.50 mM, low detection limits (μM range) and stability (8 weeks) towards the amperometric determination of laboratory and medical solutions of H2O2.
- Full Text:
- Date Issued: 2005
Surface electrochemistry of iron phthalocyanine axially ligated to 4-mercaptopyridine self-assembled monolayers at gold electrode
- Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/289282 , vital:56615 , xlink:href="https://doi.org/10.1016/j.jelechem.2005.02.018"
- Description: Surface electrochemical behaviour of a self-immobilised iron phthalocyanine (FePc) ultrathin film, via axial ligation reaction, onto a preformed 4-mercaptopyridine self-assembled monolayer on gold electrode has been described. Electrochemical evidence for the sensor clearly suggested surface-confined, flat “umbrella”-oriented and densely-packed monolayer film structure. The proposed electrochemical sensor exhibited good catalytic activity towards the oxidation of thiocyanate in pH 4.0 medium over a linear range of three decades of concentration (ca. 10−6–10−3 mol dm−3) with a detection limit in the order of ∼10−7 mol dm−3. The sensor exhibited useful potential for the analysis of thiocyanate in human urine and saliva samples. The advantageous properties of this type of electrode as a sensor for thiocyanate lie in its ease of fabrication, excellent catalytic activity, stability, sensitivity and simplicity.
- Full Text:
- Date Issued: 2005
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2005
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/289282 , vital:56615 , xlink:href="https://doi.org/10.1016/j.jelechem.2005.02.018"
- Description: Surface electrochemical behaviour of a self-immobilised iron phthalocyanine (FePc) ultrathin film, via axial ligation reaction, onto a preformed 4-mercaptopyridine self-assembled monolayer on gold electrode has been described. Electrochemical evidence for the sensor clearly suggested surface-confined, flat “umbrella”-oriented and densely-packed monolayer film structure. The proposed electrochemical sensor exhibited good catalytic activity towards the oxidation of thiocyanate in pH 4.0 medium over a linear range of three decades of concentration (ca. 10−6–10−3 mol dm−3) with a detection limit in the order of ∼10−7 mol dm−3. The sensor exhibited useful potential for the analysis of thiocyanate in human urine and saliva samples. The advantageous properties of this type of electrode as a sensor for thiocyanate lie in its ease of fabrication, excellent catalytic activity, stability, sensitivity and simplicity.
- Full Text:
- Date Issued: 2005
- «
- ‹
- 1
- ›
- »