Aptamer-based biosensor for prostate specific antigen detection using cobalt phthalocyanine-exfoliated graphite composites
- Authors: Benise, Emihle
- Date: 2024-04-04
- Subjects: Aptamer , Exfoliated graphite nano-platelets , Phthalocyanines , Impedance spectroscopy , Prostate-specific antigen
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/434850 , vital:73110
- Description: The work focuses on the development of biosensors and their use for the detection of prostate specific antigen (PSA). Four cobalt phthalocyanines (CoPcs) complexes: (1) cobalt tetra pyridyloxy phthalocyanine, (2) cobalt tetra acetamidophenoxy phthalocyanine, (3) cobalt tris(acetamidophenoxy) mono benzoic acid phthalocyanine, and (4) cobalt tris(acetamidophenoxy) mono propionic acid phthalocyanine, an exfoliated graphite (EG), and aptamer are used to make probes for PSA detection. Each complex is π-π stacked onto the EG to form EG-CoPc(π-π) hybrid which was used to modify a glassy carbon electrode (GCE). EG and CoPc were also used to modify the GCE sequential (seq) with CoPc on top to give GCE-EG-CoPc(seq). For the detection PSA, PSA specific aptamer was either sequential added or covalently linked to complexes 3 and 4 on the modified electrodes and was only sequentially added onto complexes 1 and 2 modified electrodes. Electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) were the techniques used for the detection of PSA. The electrodes were found to be selective in bovine serum albumin, glucose and cysteine and stable when 50 DPV scans were run. Electrodes gave good % recovery when human serum was spiked with different PSA concentrations. , Thesis (MSc) -- Faculty of Science, Chemistry, 2024
- Full Text:
- Date Issued: 2024-04-04
- Authors: Benise, Emihle
- Date: 2024-04-04
- Subjects: Aptamer , Exfoliated graphite nano-platelets , Phthalocyanines , Impedance spectroscopy , Prostate-specific antigen
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/434850 , vital:73110
- Description: The work focuses on the development of biosensors and their use for the detection of prostate specific antigen (PSA). Four cobalt phthalocyanines (CoPcs) complexes: (1) cobalt tetra pyridyloxy phthalocyanine, (2) cobalt tetra acetamidophenoxy phthalocyanine, (3) cobalt tris(acetamidophenoxy) mono benzoic acid phthalocyanine, and (4) cobalt tris(acetamidophenoxy) mono propionic acid phthalocyanine, an exfoliated graphite (EG), and aptamer are used to make probes for PSA detection. Each complex is π-π stacked onto the EG to form EG-CoPc(π-π) hybrid which was used to modify a glassy carbon electrode (GCE). EG and CoPc were also used to modify the GCE sequential (seq) with CoPc on top to give GCE-EG-CoPc(seq). For the detection PSA, PSA specific aptamer was either sequential added or covalently linked to complexes 3 and 4 on the modified electrodes and was only sequentially added onto complexes 1 and 2 modified electrodes. Electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) were the techniques used for the detection of PSA. The electrodes were found to be selective in bovine serum albumin, glucose and cysteine and stable when 50 DPV scans were run. Electrodes gave good % recovery when human serum was spiked with different PSA concentrations. , Thesis (MSc) -- Faculty of Science, Chemistry, 2024
- Full Text:
- Date Issued: 2024-04-04
Development of graphene materials and phthalocyanines for application in dye-sensitized solar cells
- Authors: Chindeka, Francis
- Date: 2020
- Subjects: Dye-sensitized solar cells , Graphene , Phthalocyanines , Molecular orbitals , Impedance spectroscopy
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/166092 , vital:41328
- Description: Two sets of dye-sensitized solar cells (DSSCs) were fabricated. In the first set, dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparative purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value obtained is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency. In the second set, DSSCs were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc (4) photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69 % and 4.36 % respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) showed significant improvement on the performance of the DSSC compared to previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
- Authors: Chindeka, Francis
- Date: 2020
- Subjects: Dye-sensitized solar cells , Graphene , Phthalocyanines , Molecular orbitals , Impedance spectroscopy
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/166092 , vital:41328
- Description: Two sets of dye-sensitized solar cells (DSSCs) were fabricated. In the first set, dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparative purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value obtained is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency. In the second set, DSSCs were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc (4) photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69 % and 4.36 % respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) showed significant improvement on the performance of the DSSC compared to previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
- «
- ‹
- 1
- ›
- »