Thermoluminescence of synthetic quartz annealed beyond its second phase inversion temperature
- Authors: Mthwesi, Zuko
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/46077 , vital:25577
- Description: Thermoluminescence of synthetic quartz annealed at 1000 ºC for 10 minutes has been studied. The aim was to study mechanisms of thermoluminescence in annealed synthetic quartz and to discuss the results in terms of the physics of point defects. The sample was irradiated with a beta dose of 10 Gy of beta radiation and then heated at a linear heating rate of 1 ºC.s-1 up to 500 ºC. The thermoluminescence (TL) glow curve consists of three glow peaks. Peak I at 74 0C (main peak) with high intensity as compared to the other two peaks. Peak II at 144 ºC is more intense than peak III at 180 ºC. This study was on the main peak (MP) at 74 ºC and peak III at 180 ºC. Kinetic analysis was carried out to determine the trap depth E, frequency factor s and the order of kinetics b of both peaks using the initial rise, peak shape, variable heating rate, glow curve deconvolution and isothermal TL methods. The values of kinetic parameters obtained were around 0.7 to 1.0 eV for trap depth and in the interval of 108 to 1015 s-¹ for frequency factor for both peaks. The effect of heating rate from 0.5 to 5 ºC.s-¹ on the TL peak intensity and peak temperature was observed. Also the effect of thermal quenching was observed at high heating rates. Since the TL glow curve has overlapping TL peaks, the Tm-Tstop method from 54 ºC up to 64 ºC and E -Tstop methods were introduced where a first order single peak was observed. Phototransfered thermoluminescence (PTTL) was investigated and characterized by three peaks. First PTTL peak I at 72 ºC, peak II at 134 ºC and peak III at 176 ºC. Analysis was carried out on peaks I and III for the effect of dose dependence from 20-200 Gy. Thermal fading was observed on PTTL peaks I and III, after storage time of 30 minutes.
- Full Text:
- Date Issued: 2017
- Authors: Mthwesi, Zuko
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/46077 , vital:25577
- Description: Thermoluminescence of synthetic quartz annealed at 1000 ºC for 10 minutes has been studied. The aim was to study mechanisms of thermoluminescence in annealed synthetic quartz and to discuss the results in terms of the physics of point defects. The sample was irradiated with a beta dose of 10 Gy of beta radiation and then heated at a linear heating rate of 1 ºC.s-1 up to 500 ºC. The thermoluminescence (TL) glow curve consists of three glow peaks. Peak I at 74 0C (main peak) with high intensity as compared to the other two peaks. Peak II at 144 ºC is more intense than peak III at 180 ºC. This study was on the main peak (MP) at 74 ºC and peak III at 180 ºC. Kinetic analysis was carried out to determine the trap depth E, frequency factor s and the order of kinetics b of both peaks using the initial rise, peak shape, variable heating rate, glow curve deconvolution and isothermal TL methods. The values of kinetic parameters obtained were around 0.7 to 1.0 eV for trap depth and in the interval of 108 to 1015 s-¹ for frequency factor for both peaks. The effect of heating rate from 0.5 to 5 ºC.s-¹ on the TL peak intensity and peak temperature was observed. Also the effect of thermal quenching was observed at high heating rates. Since the TL glow curve has overlapping TL peaks, the Tm-Tstop method from 54 ºC up to 64 ºC and E -Tstop methods were introduced where a first order single peak was observed. Phototransfered thermoluminescence (PTTL) was investigated and characterized by three peaks. First PTTL peak I at 72 ºC, peak II at 134 ºC and peak III at 176 ºC. Analysis was carried out on peaks I and III for the effect of dose dependence from 20-200 Gy. Thermal fading was observed on PTTL peaks I and III, after storage time of 30 minutes.
- Full Text:
- Date Issued: 2017
Thermoluminescence of annealed synthetic quartz
- Atang, Elizabeth Fende Midiki
- Authors: Atang, Elizabeth Fende Midiki
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/420 , vital:19957
- Description: The kinetic and dosimetric features of the main thermoluminescent peak of synthetic quartz have been investigated in quartz ordinarily annealed at 500_C as well as quartz annealed at 500_C for 10 minutes. The main peak is found at 78 _C for the samples annealed at 500_C for 10 minutes irradiated to 10 Gy and heated at 1.0 _C/s. For the samples ordinarily annealed at 500_C the main peak is found at 106 _C after the sample has been irradiated to 30 Gy and heated at 5.0 _C/s. In these samples, the intensity of the main peak is enhanced with repetitive measurement whereas its maximum temperature is unaffected. The peak position of the main peak in the sample is independent of the irradiation dose and this, together with its fading characteristics, are consistent with first-order kinetics. For doses between 5 and 25 Gy, the dose response of the main peak of the annealed sample is superlinear. The half-life of the main TL peak of the annealed sample is about 1 h. The activation energy E of the main peak is around 0.90 eV. For a heating rate of 0.4 _C/s, its order of kinetics b derived from the whole curve method of analysis is 1.0. Following irradiation, preheating and illumination with 470 nm blue light, the main peak in the annealed sample is regenerated during heating. The resulting phototransferred peak occurs at the same temperature as the original peak and has similar kinetic and dosimetric features, with a half-life of about 1 h. For a preheat temperature of 200 _C, the intensity of the phototransferred peak in the sample increases with illumination time up to a maximum and decreases thereafter. At longer illumination times, no further decrease in the intensity of the phototransferred peak is observed. The traps associated with the 325 _C peak are the main source of the electrons responsible for the regenerated peak.
- Full Text:
- Date Issued: 2016
- Authors: Atang, Elizabeth Fende Midiki
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/420 , vital:19957
- Description: The kinetic and dosimetric features of the main thermoluminescent peak of synthetic quartz have been investigated in quartz ordinarily annealed at 500_C as well as quartz annealed at 500_C for 10 minutes. The main peak is found at 78 _C for the samples annealed at 500_C for 10 minutes irradiated to 10 Gy and heated at 1.0 _C/s. For the samples ordinarily annealed at 500_C the main peak is found at 106 _C after the sample has been irradiated to 30 Gy and heated at 5.0 _C/s. In these samples, the intensity of the main peak is enhanced with repetitive measurement whereas its maximum temperature is unaffected. The peak position of the main peak in the sample is independent of the irradiation dose and this, together with its fading characteristics, are consistent with first-order kinetics. For doses between 5 and 25 Gy, the dose response of the main peak of the annealed sample is superlinear. The half-life of the main TL peak of the annealed sample is about 1 h. The activation energy E of the main peak is around 0.90 eV. For a heating rate of 0.4 _C/s, its order of kinetics b derived from the whole curve method of analysis is 1.0. Following irradiation, preheating and illumination with 470 nm blue light, the main peak in the annealed sample is regenerated during heating. The resulting phototransferred peak occurs at the same temperature as the original peak and has similar kinetic and dosimetric features, with a half-life of about 1 h. For a preheat temperature of 200 _C, the intensity of the phototransferred peak in the sample increases with illumination time up to a maximum and decreases thereafter. At longer illumination times, no further decrease in the intensity of the phototransferred peak is observed. The traps associated with the 325 _C peak are the main source of the electrons responsible for the regenerated peak.
- Full Text:
- Date Issued: 2016
A light-emitting-diode pulsing system for measurement of time-resolved luminescence
- Authors: Uriri, Solomon Akpore
- Date: 2015
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:20976 , http://hdl.handle.net/10962/5788
- Description: A new light-emitting-diode based pulsing system for measurement of time-resolved luminescence has been developed. The light-emitting-diodes are pulsed at various pulse-widths by a 555-timer operated as a monostable multivibrator. The light-emitting-diodes are arranged in a dural holder connected in parallel in sets of four, each containing four diodes in series. The output pulse from the 555-timer is fed into an 2N7000 MOSFET to produce a pulse-current of 500 mA to drive the set of 16 light-emitting-diodes. This size of current is sufficient to drive the diodes with each driven at a pulse-current of 90 mA with a possible maximum of 110 mA per diode. A multichannel scaler is used to trigger the pulsing system and to record data at selectable dwell times. The system is capable of generating pulse-widths in the range of microseconds upwards.
- Full Text:
- Date Issued: 2015
- Authors: Uriri, Solomon Akpore
- Date: 2015
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:20976 , http://hdl.handle.net/10962/5788
- Description: A new light-emitting-diode based pulsing system for measurement of time-resolved luminescence has been developed. The light-emitting-diodes are pulsed at various pulse-widths by a 555-timer operated as a monostable multivibrator. The light-emitting-diodes are arranged in a dural holder connected in parallel in sets of four, each containing four diodes in series. The output pulse from the 555-timer is fed into an 2N7000 MOSFET to produce a pulse-current of 500 mA to drive the set of 16 light-emitting-diodes. This size of current is sufficient to drive the diodes with each driven at a pulse-current of 90 mA with a possible maximum of 110 mA per diode. A multichannel scaler is used to trigger the pulsing system and to record data at selectable dwell times. The system is capable of generating pulse-widths in the range of microseconds upwards.
- Full Text:
- Date Issued: 2015
Thermoluminescence characteristics of synthetic quartz
- Authors: Niyonzima, Pontien
- Date: 2014
- Subjects: Thermoluminescence , Quartz , Emission spectroscopy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5538 , http://hdl.handle.net/10962/d1013190
- Description: Quartz is one of the most abundant natural minerals in the crust of the earth. Due to its dosimetric luminescence properties, it is employed in retrospective dosimetry, archaeological and geological dating. The intensity and the structure of the TL glow curves of quartz are strongly dependent upon the origin, impurity content, formation condition and pre-irradiation heat treatment. The aim of this project is to study the mechanisms of thermoluminescence (TL), Phototranssferred thermoluminescence (PTTL) and radioluminescence (RL) in synthetic quartz and to discuss the results in terms of physical characteristics of point defects involved. Thermoluminescence measurements were made on a sample of synthetic quartz in its as-received state (unannealed) synthetic quartz annealed at 500˚C for 10 minutes. The unannealed sample shows six TL glow peaks located at 94, 116, 176, 212, 280 and 348˚C at a heating rate of 5˚Cs⁻¹. The annealed sample shows seven TL peaks at 115, 148, 214, 246, 300, 348 and 412˚C at a heating rate of 5˚Cs⁻¹. The intensity of peak I, at 94 and 115˚C for the unannealed and annealed samples respectively, increases with irradiation. Peak I has an activation energy of approximately 0.90 eV and a frequency factor of the order of 10¹¹ s⁻¹. The order of kinetics is between 0.9 and 1.2. The unannealed synthetic quartz shows phototransferred thermoluminescence (PTTL) at the position of peak I after removal of the first three peaks followed by illumination. The PTTL intensities show peak shaped behaviour when plotted against illumination time. The PTTL showed a quadratic increase with dose. The material exhibits fading of PTTL intensity with delay time. Radioluminescence was measured on synthetic quartz unannealed and annealed annealed at 500, 600, 700, 800, 900 and 1000˚C for 10 to 60 min. The emission spectra of synthetic quartz show seven emission bands. The effect of irradiation on the RL spectra is to increase the intensity of all emission bands for samples annealed at temperatures less than or equal to 700˚C. The effect of annealing time is to increase the RL amplitude for the samples annealed at temperatures greater than 700˚C. The annealing temperature increases the RL amplitude of all emission bands of the spectrum for all samples.
- Full Text:
- Date Issued: 2014
- Authors: Niyonzima, Pontien
- Date: 2014
- Subjects: Thermoluminescence , Quartz , Emission spectroscopy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5538 , http://hdl.handle.net/10962/d1013190
- Description: Quartz is one of the most abundant natural minerals in the crust of the earth. Due to its dosimetric luminescence properties, it is employed in retrospective dosimetry, archaeological and geological dating. The intensity and the structure of the TL glow curves of quartz are strongly dependent upon the origin, impurity content, formation condition and pre-irradiation heat treatment. The aim of this project is to study the mechanisms of thermoluminescence (TL), Phototranssferred thermoluminescence (PTTL) and radioluminescence (RL) in synthetic quartz and to discuss the results in terms of physical characteristics of point defects involved. Thermoluminescence measurements were made on a sample of synthetic quartz in its as-received state (unannealed) synthetic quartz annealed at 500˚C for 10 minutes. The unannealed sample shows six TL glow peaks located at 94, 116, 176, 212, 280 and 348˚C at a heating rate of 5˚Cs⁻¹. The annealed sample shows seven TL peaks at 115, 148, 214, 246, 300, 348 and 412˚C at a heating rate of 5˚Cs⁻¹. The intensity of peak I, at 94 and 115˚C for the unannealed and annealed samples respectively, increases with irradiation. Peak I has an activation energy of approximately 0.90 eV and a frequency factor of the order of 10¹¹ s⁻¹. The order of kinetics is between 0.9 and 1.2. The unannealed synthetic quartz shows phototransferred thermoluminescence (PTTL) at the position of peak I after removal of the first three peaks followed by illumination. The PTTL intensities show peak shaped behaviour when plotted against illumination time. The PTTL showed a quadratic increase with dose. The material exhibits fading of PTTL intensity with delay time. Radioluminescence was measured on synthetic quartz unannealed and annealed annealed at 500, 600, 700, 800, 900 and 1000˚C for 10 to 60 min. The emission spectra of synthetic quartz show seven emission bands. The effect of irradiation on the RL spectra is to increase the intensity of all emission bands for samples annealed at temperatures less than or equal to 700˚C. The effect of annealing time is to increase the RL amplitude for the samples annealed at temperatures greater than 700˚C. The annealing temperature increases the RL amplitude of all emission bands of the spectrum for all samples.
- Full Text:
- Date Issued: 2014
Thermoluminescence of natural quartz
- Authors: Lontsi Sob, Aaron Joel
- Date: 2014
- Subjects: Thermoluminescence , Quartz , Thermoluminescence dosimetry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5543 , http://hdl.handle.net/10962/d1013358
- Description: The kinetic and dosimetric features of the main thermoluminescence peak of quartz have been investigated in unannealed as well in quartz annealed at 500˚C for 10 minutes. The main peak is found at 92 and 86˚C respectively for aliquots of unannealed and annealed samples irradiated to 10 Gy and heated at 5.0˚C/s. For each sample, the intensity of the main peak is enhanced with repetitive measurement whereas its maximum temperature is unaffected. The peak position of the main peak in each sample is independent of the irradiation dose and this, together with its fading characteristics are consistent with first-order kinetics. For low doses, typically between 2 and 10 Gy, the dose response of the main peak in each sample is linear. In the intermediate dose range from 10 to 60 Gy, the growth of the main peak in each sample is sub-linear and for greater doses, in the range from 60 Gy to 151 Gy, it is linear again. The half-life of the main peak of the unannealed sample is about 1.3 h whereas that of the annealed sample is about 1.2 h. The main peak in each sample can be approximated to a first-order glow peak. As the heating rate increases, the intensity of the main peak in each sample decreases. This is evidence of thermal quenching. The main peak in each sample is the only peak regenerated by phototransfer. The resulting phototransferred peak occurs at the same temperature as the original peak and has similar kinetic and dosimetric features. For a preheat temperature of 120˚C, the intensity of the phototransferred peak in each sample increases with illumination time up to a maximum and decreases afterwards. At longer illumination times (such as 30 min up to 1 h), no further decrease in the intensity of the phototransferred peak is observed. The traps associated with the 325˚C peak are the main source of the electrons responsible for the regenerated peak. Radioluminescence emission spectra were also measured for quartz annealed at various temperatures. Emission bands in quartz are affected by annealing and irradiation. A strong enhancement of the 3.4 eV (~366 nm) emission band is observed in quartz annealed at 500˚C. A new emission band which grows with annealing up to 1000˚C is observed at 3.7 eV (~330 nm) for quartz annealed at 600˚C. An attempt has been made to correlate the changes in radioluminescence emission spectra due to annealing with the influence of annealing on luminescence lifetimes in quartz.
- Full Text:
- Date Issued: 2014
- Authors: Lontsi Sob, Aaron Joel
- Date: 2014
- Subjects: Thermoluminescence , Quartz , Thermoluminescence dosimetry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5543 , http://hdl.handle.net/10962/d1013358
- Description: The kinetic and dosimetric features of the main thermoluminescence peak of quartz have been investigated in unannealed as well in quartz annealed at 500˚C for 10 minutes. The main peak is found at 92 and 86˚C respectively for aliquots of unannealed and annealed samples irradiated to 10 Gy and heated at 5.0˚C/s. For each sample, the intensity of the main peak is enhanced with repetitive measurement whereas its maximum temperature is unaffected. The peak position of the main peak in each sample is independent of the irradiation dose and this, together with its fading characteristics are consistent with first-order kinetics. For low doses, typically between 2 and 10 Gy, the dose response of the main peak in each sample is linear. In the intermediate dose range from 10 to 60 Gy, the growth of the main peak in each sample is sub-linear and for greater doses, in the range from 60 Gy to 151 Gy, it is linear again. The half-life of the main peak of the unannealed sample is about 1.3 h whereas that of the annealed sample is about 1.2 h. The main peak in each sample can be approximated to a first-order glow peak. As the heating rate increases, the intensity of the main peak in each sample decreases. This is evidence of thermal quenching. The main peak in each sample is the only peak regenerated by phototransfer. The resulting phototransferred peak occurs at the same temperature as the original peak and has similar kinetic and dosimetric features. For a preheat temperature of 120˚C, the intensity of the phototransferred peak in each sample increases with illumination time up to a maximum and decreases afterwards. At longer illumination times (such as 30 min up to 1 h), no further decrease in the intensity of the phototransferred peak is observed. The traps associated with the 325˚C peak are the main source of the electrons responsible for the regenerated peak. Radioluminescence emission spectra were also measured for quartz annealed at various temperatures. Emission bands in quartz are affected by annealing and irradiation. A strong enhancement of the 3.4 eV (~366 nm) emission band is observed in quartz annealed at 500˚C. A new emission band which grows with annealing up to 1000˚C is observed at 3.7 eV (~330 nm) for quartz annealed at 600˚C. An attempt has been made to correlate the changes in radioluminescence emission spectra due to annealing with the influence of annealing on luminescence lifetimes in quartz.
- Full Text:
- Date Issued: 2014
Thermoluminescence of secondary glow peaks in carbon-doped aluminium oxide
- Authors: Seneza, Cleophace
- Date: 2014
- Subjects: Thermoluminescence , Aluminum oxide , Thermoluminescence dosimetry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5537 , http://hdl.handle.net/10962/d1013053
- Description: Carbon-doped aluminium oxide, α-Al₂O₃ : C, is a highly sensitive luminescence dosimeter. The high sensitivity of α-Al₂O₃ : C has been attributed to large concentrations of oxygen vacancies, F and F⁺ centres, induced in the material during its preparation. The material is prepared in a highly reducing atmosphere in the presence of carbon. In the luminescence process, electrons are trapped in F-centre defects as a result of irradiation of the material. Thermal or optical release of trapped electrons leads to emission of light, thermoluminescence (TL) or optically stimulated light (OSL) respectively. The thermoluminescence technique is used to study point defects involved in luminescence of α-Al₂O₃ : C. A glow curve of α-Al₂O₃ : C, generally, shows three peaks; the main dosimetric peak of high intensity (peak II) and two other peaks of lower intensity called secondary glow peaks (peaks I and III). The overall aim of our work was to study the TL mechanisms responsible for secondary glow peaks in α-Al₂O₃ : C. The dynamics of charge movement between centres during the TL process was studied. The phototransferred thermoluminescence (PTTL) from secondary glow peaks was also studied. The kinetic analysis of TL from secondary peaks has shown that the activation energy of peak I is 0.7 eV and that of peak III, 1.2 eV. The frequency factor, the frequency at which an electron attempts to escape a trap, was found near the range of the Debye vibration frequency. Values of the activation energy are consistent within a variety of methods used. The two peaks follow first order kinetics as confirmed by the TM-Tstop method. A linear dependence of TL from peak I on dose is observed at various doses from 0.5 to 2.5 Gy. The peak position for peak I was also independent on dose, further confirmation that peak I is of first order kinetics. Peak I suffers from thermal fading with storage with a half-life of about 120 s. The dependence of TL intensity for peak I increased as a function of heating rate from 0.2 to 6ºCs⁻¹. In contrast to the TL intensity for peak I, the intensity of TL for peak III decreases with an increase of heating rate from 0.2 to 6ºCs⁻¹. This is evidence of thermal quenching for peak III. Parameters W = 1.48 ± 0:10 eV and C = 4 x 10¹³ of thermal quenching were calculated from peak III intensities at different heating rates. Thermal cleaning of peak III and the glow curve deconvolution methods confirmed that the main peak is actually overlapped by a small peak (labeled peak IIA). The kinetic analysis of peak IIA showed that it is of first order kinetics and that its activation energy is 1:0 eV. In addition, the peak IIA is affected by thermal quenching. Another secondary peak appears at 422ºC (peak IV). However, the kinetic analysis of TL from peak IV was not studied because its intensity is not well defined. A heating rate of 0.4ºCs⁻¹ was used after a dose of 3 Gy in kinetic analysis of peaks IIA and III. The study of the PTTL showed that peaks I and II were regenerated under PTTL but peak III was not. Various effects of the PTTL for peaks I and II for different preheating temperatures in different samples were observed. The effect of annealing at 900ºC for 15 minutes between measurements following each illumination time was studied. The effect of dose on secondary peaks was also studied in this work. The kinetic analysis of the PTTL intensity for peak I showed that its activation energy is 0.7 eV, consistent with the activation energy of the normal TL for peak I. The PTTL intensity from peak I fades rapidly with storage compared with the thermal fading from peak I of the normal TL. The PTTL intensity for peak I decreases as a function of heating rate. This decrease was attributed to thermal quenching. Thermal quenching was not observed in the case of the normal TL intensity. The cause of this contrast requires further study.
- Full Text:
- Date Issued: 2014
- Authors: Seneza, Cleophace
- Date: 2014
- Subjects: Thermoluminescence , Aluminum oxide , Thermoluminescence dosimetry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5537 , http://hdl.handle.net/10962/d1013053
- Description: Carbon-doped aluminium oxide, α-Al₂O₃ : C, is a highly sensitive luminescence dosimeter. The high sensitivity of α-Al₂O₃ : C has been attributed to large concentrations of oxygen vacancies, F and F⁺ centres, induced in the material during its preparation. The material is prepared in a highly reducing atmosphere in the presence of carbon. In the luminescence process, electrons are trapped in F-centre defects as a result of irradiation of the material. Thermal or optical release of trapped electrons leads to emission of light, thermoluminescence (TL) or optically stimulated light (OSL) respectively. The thermoluminescence technique is used to study point defects involved in luminescence of α-Al₂O₃ : C. A glow curve of α-Al₂O₃ : C, generally, shows three peaks; the main dosimetric peak of high intensity (peak II) and two other peaks of lower intensity called secondary glow peaks (peaks I and III). The overall aim of our work was to study the TL mechanisms responsible for secondary glow peaks in α-Al₂O₃ : C. The dynamics of charge movement between centres during the TL process was studied. The phototransferred thermoluminescence (PTTL) from secondary glow peaks was also studied. The kinetic analysis of TL from secondary peaks has shown that the activation energy of peak I is 0.7 eV and that of peak III, 1.2 eV. The frequency factor, the frequency at which an electron attempts to escape a trap, was found near the range of the Debye vibration frequency. Values of the activation energy are consistent within a variety of methods used. The two peaks follow first order kinetics as confirmed by the TM-Tstop method. A linear dependence of TL from peak I on dose is observed at various doses from 0.5 to 2.5 Gy. The peak position for peak I was also independent on dose, further confirmation that peak I is of first order kinetics. Peak I suffers from thermal fading with storage with a half-life of about 120 s. The dependence of TL intensity for peak I increased as a function of heating rate from 0.2 to 6ºCs⁻¹. In contrast to the TL intensity for peak I, the intensity of TL for peak III decreases with an increase of heating rate from 0.2 to 6ºCs⁻¹. This is evidence of thermal quenching for peak III. Parameters W = 1.48 ± 0:10 eV and C = 4 x 10¹³ of thermal quenching were calculated from peak III intensities at different heating rates. Thermal cleaning of peak III and the glow curve deconvolution methods confirmed that the main peak is actually overlapped by a small peak (labeled peak IIA). The kinetic analysis of peak IIA showed that it is of first order kinetics and that its activation energy is 1:0 eV. In addition, the peak IIA is affected by thermal quenching. Another secondary peak appears at 422ºC (peak IV). However, the kinetic analysis of TL from peak IV was not studied because its intensity is not well defined. A heating rate of 0.4ºCs⁻¹ was used after a dose of 3 Gy in kinetic analysis of peaks IIA and III. The study of the PTTL showed that peaks I and II were regenerated under PTTL but peak III was not. Various effects of the PTTL for peaks I and II for different preheating temperatures in different samples were observed. The effect of annealing at 900ºC for 15 minutes between measurements following each illumination time was studied. The effect of dose on secondary peaks was also studied in this work. The kinetic analysis of the PTTL intensity for peak I showed that its activation energy is 0.7 eV, consistent with the activation energy of the normal TL for peak I. The PTTL intensity from peak I fades rapidly with storage compared with the thermal fading from peak I of the normal TL. The PTTL intensity for peak I decreases as a function of heating rate. This decrease was attributed to thermal quenching. Thermal quenching was not observed in the case of the normal TL intensity. The cause of this contrast requires further study.
- Full Text:
- Date Issued: 2014
Mechanisms of luminescence in α-Al₂O₃:C : investigations using time-resolved optical stimulation and thermoluminescence techniques
- Authors: Nyirenda, Angel Newton
- Date: 2013
- Subjects: Thermoluminescence Aluminum oxide Optically stimulated luminescence dating Radiation dosimetry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5447 , http://hdl.handle.net/10962/d1002961
- Description: Carbon-doped aluminium oxide, α-Al₂O₃:C, is a ultra-sensitive dosimeter of topical research interest. The aim of this project was to investigate the dynamics of luminesce in this material. The methods of investigation consisted of thermoluminescence and time-resolved optical stimulation. Thermoluminescence measurements provide information on trap distribution and kinetic parameters of the traps involved in luminescence whereas time-resolved optical stimulation is a handy technique in investigation of luminescence lifetimes and provides an insight into the charge transitions between traps and recombination centres. Measurements were made on samples annealed at a nominal temperature of 900⁰C for 15 minutes. The material shows the presence of five thermoluminescence peaks at 37⁰C, 160⁰C, 300⁰C 410⁰C, and 480⁰C at a heating rate of 0.03k/s when irradiated to 6.0 Gy of beta. The main peak at 160⁰C, shows a linear dose response for doses between 0.1 Gy and 10 Gy and then goes sublinear above 10 Gy, the peak at 37⁰C shows a sublinear dose response for doses between 0.1 Gy and 10 Gy and appears to saturate thereafter, whereas the dose response of the peak at 300⁰C goes from linear to supralinear then apparently quadratic behaviour in the dose range of 0.1 Gy to 16.0 Gy. The trap depth of the main peak, that is, its activation energy as determined below the conduction band, has been approximated at 1.3 eV with a kinetic order of approximately 1.2. Time-resolved optical stimulation has been used to investigate luminescence lifetimes. The mean luminescence lifetime obtained for the sample at ambient temperatures is 35.0±1.0 ms. The investigations of the dependence of luminescence lifetimes on measurement temperature show that the material suffers from thermal quenching effects at measurement temperatures above 140⁰C with the activation energy of thermal quenching estimated at 1.045±0.002 eV. Shallow traps i.e. traps lying close to the conduction band, seem to elongate the lifetimes of optically stimulated luminescence in the material at temperatures between 30⁰C - 80⁰C due to charge retrapping. The material exhibits both fading and recuperation of the optically stimulated luminescence signal with storage time.
- Full Text:
- Date Issued: 2013
- Authors: Nyirenda, Angel Newton
- Date: 2013
- Subjects: Thermoluminescence Aluminum oxide Optically stimulated luminescence dating Radiation dosimetry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5447 , http://hdl.handle.net/10962/d1002961
- Description: Carbon-doped aluminium oxide, α-Al₂O₃:C, is a ultra-sensitive dosimeter of topical research interest. The aim of this project was to investigate the dynamics of luminesce in this material. The methods of investigation consisted of thermoluminescence and time-resolved optical stimulation. Thermoluminescence measurements provide information on trap distribution and kinetic parameters of the traps involved in luminescence whereas time-resolved optical stimulation is a handy technique in investigation of luminescence lifetimes and provides an insight into the charge transitions between traps and recombination centres. Measurements were made on samples annealed at a nominal temperature of 900⁰C for 15 minutes. The material shows the presence of five thermoluminescence peaks at 37⁰C, 160⁰C, 300⁰C 410⁰C, and 480⁰C at a heating rate of 0.03k/s when irradiated to 6.0 Gy of beta. The main peak at 160⁰C, shows a linear dose response for doses between 0.1 Gy and 10 Gy and then goes sublinear above 10 Gy, the peak at 37⁰C shows a sublinear dose response for doses between 0.1 Gy and 10 Gy and appears to saturate thereafter, whereas the dose response of the peak at 300⁰C goes from linear to supralinear then apparently quadratic behaviour in the dose range of 0.1 Gy to 16.0 Gy. The trap depth of the main peak, that is, its activation energy as determined below the conduction band, has been approximated at 1.3 eV with a kinetic order of approximately 1.2. Time-resolved optical stimulation has been used to investigate luminescence lifetimes. The mean luminescence lifetime obtained for the sample at ambient temperatures is 35.0±1.0 ms. The investigations of the dependence of luminescence lifetimes on measurement temperature show that the material suffers from thermal quenching effects at measurement temperatures above 140⁰C with the activation energy of thermal quenching estimated at 1.045±0.002 eV. Shallow traps i.e. traps lying close to the conduction band, seem to elongate the lifetimes of optically stimulated luminescence in the material at temperatures between 30⁰C - 80⁰C due to charge retrapping. The material exhibits both fading and recuperation of the optically stimulated luminescence signal with storage time.
- Full Text:
- Date Issued: 2013
- «
- ‹
- 1
- ›
- »