The thermodynamics of solutions and binary liquid mixtures
- Authors: Mercer-Chalmers, June Dawn
- Date: 1993
- Subjects: Thermodynamics Liquids Solution (Chemistry)
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4390 , http://hdl.handle.net/10962/d1005055
- Description: The thesis is presented in two parts. In part one, the excess thermodynamic properties have been determined for several binary liquid mixtures, with the aim of testing theories of liquid mixtures. The excess molar enthalpies, Hem, have been determined using an LKB flow microcalorimeter, and the excess molar volumes, Vem, have been determined using an Anton Paar densitometer. The HemS and VemS have been measured at 298.15 K for binary systems involving an alkanol (methanol, ethanol, I-propanol, 2-propanol) mixed with a hydrocarbon (l-hexene, I-heptene, l-octene, I-hexyne, I-heptyne, l-octyne, toluene, mesitylene, 0-, m-, or p-xylene, cyclopentane, cyclohexane, cycloheptane, cyclooctane, cyclodecane). The results show trends relating to the degree of unsaturation, or size, of component molecules as well as the position of the hydroxyl group on the alkanol. Measurements were also made on mixtures involving an (n-alkane + a pseudo-n-alkane) and ( a cYcloalkane + a pseudo-cycloalkane). Two theories of liquid mixtures were tested in this work. The first theory tested was the theory of Congruency. This theory was tested, by means of a null test, on a novel set of mixtures involving an n-alkane (hexane, heptane, octane, decane, dodecane) + a pseudo-nalkane,and mixtures of a cycloalkane (cyclopentane, cyclohexane, cycloheptane, cyclooctane)+ a pseudo-cycloalkane. Deviations from the theory was less than the experimental error for the (n-alkane + pseudo-n-alkane) mixtures. However, significant deviations were observed for the mixtures of (a cycloalkane + a pseudo-cycloalkane). The second theory tested was the Flory theory, which has been used to predict the excess molar enthalpies and excess molar volumes for the mixtures involving (a 1-alkene, or 1-alkyne, or methyl-substituted benzene) + an alkanol. The results show that the theory does not hold for hydrocarbon mixtures involving an alkanol. In the second part of this thesis, the partial molar volumes, at infinite dilution, of binary solution involving a solid solute (18-crown-6 ether, dibenzo-18-crown-6 ether, dicyclohexanov 18-crown-6 ether, 15-crown-5 ether, or cryptand-222) are determined in various solvents. The results were repeated with a view to determine the volume changes at infinite dilution upon complexation, ΔV∞ of the crown ether or cryptand with a metal halide salt, MX (NaCl, NaI, KCl, KI, CsCl, CsI). The ΔV∞ results were compared with results in the literature for cryptand-222 (c-222) and dibenzo-18-crown-6 ether (B₂CE6) complexed with MX, and the study was extended to include further MX complexes with c-222 and B₂CE6, as well as MX complexes with 15-crown-5 ether and dicyclohexano-18-crown-6 ether. ΔV∞ results were correlated with the Hepler prediction of the electrostriction solvent effect.
- Full Text:
- Date Issued: 1993
An investigation into the properties of cotton fibres as used in nonwoven fabrics
- Authors: Lutseke, Nothando Sazikazi
- Date: 1989
- Subjects: Cotton -- Analysis , Fibers -- Analysis , Nonwoven fabrics -- Analysis , Textile chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4552 , http://hdl.handle.net/10962/d1018241
- Description: The purpose of this investigation was to determine the properties that characterise cotton fibres in the various stages in the CPNF process as well as to determine which fibre characteristics a r e required to entangle the fibres to produce a successful CPNF . The criteria adopted in this work for a successful CPNF include: 1. the tensile strength of the fabrics 2. a well-defined pattern 3. absorbency and wicking The properties selected for investigation were 1. the cotton fibre surface (using SEM and DSC analyses) 2. the degree of degradation of the cotton fibre as a result of the CPNF process (using cellulose fluidity measurements) 3. the non-cellulosic content of the fibre (using IR, DSC, and Chemical analyses) 4. fibre friction 5. absorbency and wicking 6. tensile properties Analysis of the results indicates clearly what the fundamental properties of the cotton fibre must be for a successful cotton CPNF to be manufactured. The conclusions also indicate the necessary properties a man-made fibre must have to produce a successful CPNF.
- Full Text:
- Date Issued: 1989
The thermodynamics of binary liquid mixtures of compounds containing multiple bonds.
- Authors: Baxter, Rodney Charles
- Date: 1989
- Subjects: Solution (Chemistry)
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4531 , http://hdl.handle.net/10962/d1016079
- Description: Excess thermodynamic properties have been determined for several binary liquid mixtures with the aim of testing various thermodynamic theories and postulates. Excess molar enthalpies, HEm, have been determined using an LKB flow microcalorimeter and excess molar volumes, VEm, have been determined using an Anton Paar vibrating tube densitometer. The activity coefficients at infinite dilution ƴ∞₁₃, have been determined using an atmospheric pressure gas-liquid chromatograph. The excess molar enthalpies and the excess molar volumes have been measured at 298.15 K for systems involving the bicyclic compounds decahydronaphthalene (decalin), 1,2,3,4-tetrahydronaphthalene (tetralin), bicyclohexyl, or cyclohexylbenzene mixed with 1- hexene, 1-hexyne, 1-heptene, 1-heptyne, cyclohexene, 1,3-cyclohexadiene, 1,4- cyclohexadiene, or benzene. These excess properties have also been measured for systems where the bicyclic compound has been replaced with benzene, cyclohexane or n-hexane. The results show defmite trends related to the size, shape, and the degree of unsaturation of the component molecules. The Flory theory has been used to predict excess molar enthalpies and excess molar volumes for {(a bicyclic compound or benzene or cyclohexane or n-hexane) +(an n-alkane or a 1-alkene or a 1-alkyne or a cycloalkane or cyclohexene or a cycloalkadiene or benzene)}. The one parameter equations offer reasonably good correlations between the predicted and the experimental results. More insight into the origins of the contnbutions to the excess thermodynamic properties for these systems has been gained by considering the approximate equations of Patterson and co-workers, which separate the interactional and the free volume contributions to the excess molar enthalpy and the excess molar volume. The one parameter equations have adequately rationalized a good deal of the observed behaviour for HEm and VEm. The theory of Liebermann and co-workers, which does not employ any adjustable parameters, has not been as successful at predicting the excess thermodynamic properties for the above systems. The activity coefficients at infinite dilution have been measured at 278.15 K, 288.15 K and 298.15 K for n-bexane, 1-bexene, 1-hexyne, n-heptane, 1-heptene, 1-heptyne, cyclohexane, cyclohexene, 1,3-cyclohexadiene, 1,4-cyclohexadiene, and benzene, in decalin, tetralin, bicyclohexyl, and cyclohexylbenzene. Solvent losses from the column have been accounted for by an extrapolation procedure. The activity coefficient results together with the HEm and VEm values have been used to calculate the partial molar excess thermodynamic properties of mixing at infinite dilution. The partial molar excess properties at infinite dilution for decalin mixtures are similar to those for bicyclohexyl mixtures. There is also a similarity between the properties of the tetralin mixtures and the cyclohexylbenzene mixtures. The cycloalkadienes, benzene and the 1-alkynes exhibit a strong dissociation effect on being mixed with the saturated solvents, decalin and bicyclohexyl, but associate strongly with tetralin and with cyclohexylbenzene. The Flory theory bas been used to predict activity coefficients at infinite dilution from the experimentally determined HEm results for { (n-bexane or 1-hexene or 1-hexyne or naheptane or 1-heptene or 1-beptyne) + (a bicyclic compound)}. The theory is much better at predicting values for mixtures where both components are either saturated molecules or are unsaturated molecules than for {saturated + unsaturated} mixtures.
- Full Text:
- Date Issued: 1989
A study of petrol and diesel fuel blends with special reference to their thermodynamic properties and phase equilibria
- Authors: Heyward, Caroline
- Date: 1986
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:21167 , http://hdl.handle.net/10962/6695
- Description: The ternary phase behaviour of the n-heptane-l-propanol-water system was studied and compared with the theoretical prediction based on the UNIQUAC model for non-electrolyte solutions. The results showed that this model adequately approximated experimental studies. The excess enthalpies and excess volumes for several binary mixtures were determined. The excess enthalpies were measured using a LKB flow microcalorimeter and the excess -volumes determined using a PAAR densitometer. The study showed that no significant enthalpy or volume changes occurred when petrol/n-heptane were mixed with alcohols. Ternary phase diagrams, including tie lines have been determined for a number of petrol-alcohol-water systems (including the Sasol blend of alcohols). The tie line results show that the concentration of water in the water-rich layer is strongly dependent on the type of alcohol used. The Sasol alcohol blended with petrol resulted in a high water concentration in the water-rich layer which forms on phase separation. This is believed to contribute significantly to the corrosion problems experienced by motorists using the Sasol blended fuel on the Witwatersrand. The effect of temperature on several of these blends was included in the study. Diesel-alcohol blends and the co-solvent properties of ethyl acetate investigated. Ethyl acetate ensures miscibility at low concentrations for diesel-ethanol blends. Octyl nitrate and two cetane improvers from AECI were assessed in terms of their ability to restore cetane rating of blended diesel fuel to that of pure diesel fuel. The results indicated that all three samples were successful in this application.
- Full Text:
- Date Issued: 1986
A study of petrol and diesel fuel blends with special reference to their thermodynamic propeties and phase equilibria
- Authors: Hayward, Caroline
- Date: 1986
- Subjects: Gasoline , Diesel fuels , Thermodynamics , Liquid-liquid equilibrium , Alcohol as fuel
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4065 , http://hdl.handle.net/10962/d1004902 , Gasoline , Diesel fuels , Thermodynamics , Liquid-liquid equilibrium , Alcohol as fuel
- Description: The ternary phase behaviour of the n-heptane-l-propanol-water system was studied and compared with the theoretical prediction based on the UNIQUAC model for non-electrolyte solutions. The results showed that this model adequately approximated experimental studies. The excess enthalpies and excess volumes for several binary mixtures were determined. The excess enthalpies were measured using a LKB flow microcalorimeter and the excess -volumes determined using a PAAR densitometer. The study showed that no significant enthalpy or volume changes occurred when petrol/n-heptane were mixed with alcohols . Ternary phase diagrams, including tie lines have been determined for a number of petrol-alcohol-water systems (including the Sasol blend of alcohols). The tie line results show that the concentration of water in the water-rich layer is strongly dependent on the type of alcohol used. The Sasol alcohol blended with petrol resulted in a high water concentration in the water-rich layer which forms on phase separation. This is believed to contribute significantly to the corrosion problems experienced by motorists using the Sasol blended fuel on the Witwatersrand. The effect of temperature on several of these blends was included in the study. Diesel-alcohol blends and the co-solvent properties of ethyl acetate investigated. Ethyl acetate ensures miscibility at low concentrations for diesel-ethanol blends. Octyl nitrate and two cetane improvers from AECI were assessed in terms of their ability to restore cetane rating of blended diesel fuel to that of pure diesel fuel. The results indicated that all three samples were successful in this application. , KMBT_363
- Full Text:
- Date Issued: 1986