Electrocatalytic detection of pesticides with electrodes modified with nanoparticles of phthalocyanines and multiwalled carbon nanotubes
- Authors: Siswana, Msimelelo Patrick
- Date: 2013
- Subjects: Phthalocyanines Pesticides Electrocatalysis Electrochemistry Nanotubes Nanoparticles Transmission electron microscopy Scanning electron microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4282 , http://hdl.handle.net/10962/d1002613
- Description: Three types of electrodes: carbon paste electrodes modified with nanoparticles of metallophthalocyanines (MPcNP-CPEs, M = Mn, Fe, Ni, Co), basal plane pyrolytic graphite electrodes modified with iron or nickel phthalocyanine nanoparticles and multiwalled carbon nanotube composites (FePcNP/MWCNT-BPPGE or NiPcNP/MWCNT-BPPGE),and basal plane pyrolytic graphite electrodes modified with multiwalled carbon nanotubes and electropolymerized metal tetra-aminophthalocyanines (poly-MTAPc-MWCNT-BPPGE), where M is Mn, Fe, Ni or Co, were prepared. Electrochemical characterizations showed that faster electron transfer kinetics occurred at the NiPcNP/MWCNT-BPPGE than at the FePcNP/MWCNT-BPPGE surface. SEM and electrochemical characterizations of poly-MTAPc-MWCNT-BPPGE showed that MTAPc had been deposited on the MWCNTBPPGE surface, and that the poly-CoTAPc-MWCNT-BPPGE exhibited the fastest electron transfer kinetics of all the poly-MTAPc-MWCNT-BPPGEs. Using amitrole and asulam as test analytes, electrochemical experiments showed that, amongst the CPEs, the FePcNP-CPE and NiPcNP-CPE displayed the most electrocatalytic behavior towards amitrole and asulam oxidation, respectively, and further experiments were done to obtain the electrochemical parameters associated with these electrodes and the corresponding analytes. Although, the FePcNP/MWCNT- BPPGE displayed electrocatalytic behavior towards amitrole oxidation in comparison with the bare BPPGE, it was less electrocatalytic than the FePcNP-CPE in terms of detection potential. The NiPcNP/MWCNT-BPPGE displayed the same detection potential as the NiPcNP-CPE. The poly-FeTAPc-MWCNT-BPPGE exhibited the most electrocatalytic behavior towards amitrole, of all the electrodes investigated, and the poly-CoTAPc-MWCNT-BPPGE displayed the best electrocatalytic behavior towards asulam, amongst the poly-MTAPc-MWCNT-BPPGEs.
- Full Text:
- Date Issued: 2013
- Authors: Siswana, Msimelelo Patrick
- Date: 2013
- Subjects: Phthalocyanines Pesticides Electrocatalysis Electrochemistry Nanotubes Nanoparticles Transmission electron microscopy Scanning electron microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4282 , http://hdl.handle.net/10962/d1002613
- Description: Three types of electrodes: carbon paste electrodes modified with nanoparticles of metallophthalocyanines (MPcNP-CPEs, M = Mn, Fe, Ni, Co), basal plane pyrolytic graphite electrodes modified with iron or nickel phthalocyanine nanoparticles and multiwalled carbon nanotube composites (FePcNP/MWCNT-BPPGE or NiPcNP/MWCNT-BPPGE),and basal plane pyrolytic graphite electrodes modified with multiwalled carbon nanotubes and electropolymerized metal tetra-aminophthalocyanines (poly-MTAPc-MWCNT-BPPGE), where M is Mn, Fe, Ni or Co, were prepared. Electrochemical characterizations showed that faster electron transfer kinetics occurred at the NiPcNP/MWCNT-BPPGE than at the FePcNP/MWCNT-BPPGE surface. SEM and electrochemical characterizations of poly-MTAPc-MWCNT-BPPGE showed that MTAPc had been deposited on the MWCNTBPPGE surface, and that the poly-CoTAPc-MWCNT-BPPGE exhibited the fastest electron transfer kinetics of all the poly-MTAPc-MWCNT-BPPGEs. Using amitrole and asulam as test analytes, electrochemical experiments showed that, amongst the CPEs, the FePcNP-CPE and NiPcNP-CPE displayed the most electrocatalytic behavior towards amitrole and asulam oxidation, respectively, and further experiments were done to obtain the electrochemical parameters associated with these electrodes and the corresponding analytes. Although, the FePcNP/MWCNT- BPPGE displayed electrocatalytic behavior towards amitrole oxidation in comparison with the bare BPPGE, it was less electrocatalytic than the FePcNP-CPE in terms of detection potential. The NiPcNP/MWCNT-BPPGE displayed the same detection potential as the NiPcNP-CPE. The poly-FeTAPc-MWCNT-BPPGE exhibited the most electrocatalytic behavior towards amitrole, of all the electrodes investigated, and the poly-CoTAPc-MWCNT-BPPGE displayed the best electrocatalytic behavior towards asulam, amongst the poly-MTAPc-MWCNT-BPPGEs.
- Full Text:
- Date Issued: 2013
Catalytic activities of metallophthalocyanines towards detection and transformation of pollutants
- Authors: Agboola, Bolade Oyeyinka
- Date: 2007
- Subjects: Phthalocyanines Electrochemistry Pollutants -- Biodegradation Pollutants -- Measurement
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4427 , http://hdl.handle.net/10962/d1006922
- Description: Syntheses, spectral, electrochemical and spectroelectrochemical studies of new thiol-derivatised MPc complexes were satisfactorily carried out. For the first time, spectroelectrochemistry gave evidence for the formation of Ni²⁺/Ni⁺ process in a NiPc complex. Significant insights as to the nature of Fe⁺Pc and Ni⁺Pc spectra were obtained. Transformations of chlorophenols using chemical and photochemical methods are presented. For cobalt tetrasulphophthalocyanine catalysed oxidation of chlorophenols using hydrogen peroxide as the oxidant, types of oxidation products formed depended on the solvent conditions. Photolysis of aqueous solutions of chlorophenols in the presence of immobilised non-transition metal phthalocyanine photosensitisers onto Amerlite® was carried out. For the first time, MPcS[subscript mix] complexes were immobilised on Amberlite® for use in heterogeneous photocatalysis. Photolysis of the chlorophenols resulted mainly in the formation of chlorobenzoquinone derivatives. The generation of singlet oxygen (¹O₂) by these immobilised MPc photosensitisers was found to play a major role in their photoactivities. Modifications of gold electrodes with the newly synthesised thiol-derivatised MPc complexes via electropolymerisation and SAM techniques are presented. Cyclic voltammetry, impedance spectroscopy (NiPcs only) and spectroelectrochemical techniques (NiPcs only) confirmed that the complexes formed films on gold electrodes. Stable and well packed SAM films as evidenced by the voltammetric characterisation were obtained. For the first time, optimisation of the time for SAM formation based on CV technique was studied. First example of a formation of MnPc-SAM was achieved. Catalytic activities of the NiPc towards chlorophenol depended on the nature of the NiPc in the polymer films and also anti-fouling ability of the films depended on polymer film thickness. The FeTBMPc polymer modified gold electrode showed the best catalytic activity in terms of peak potential, E[subscript p] when compared to reported work in literature for nitrate electrooxidation. Cyclic voltammetry and spectroscopy studies showed that the CoPcs, FePcs and NiPcs catalysed nitrite oxidation involve 2 electrons in total while that of McPcs involve 1 electron. Better catalytic performance towards sulphite electrooxidation were obtained for the CoPcs, FePcs and MnPcs which have metal based redox processes within the range of the sulphite electrooxidation peak while the NiPcs which did not show metal based oxidation reaction performed less.
- Full Text:
- Date Issued: 2007
- Authors: Agboola, Bolade Oyeyinka
- Date: 2007
- Subjects: Phthalocyanines Electrochemistry Pollutants -- Biodegradation Pollutants -- Measurement
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4427 , http://hdl.handle.net/10962/d1006922
- Description: Syntheses, spectral, electrochemical and spectroelectrochemical studies of new thiol-derivatised MPc complexes were satisfactorily carried out. For the first time, spectroelectrochemistry gave evidence for the formation of Ni²⁺/Ni⁺ process in a NiPc complex. Significant insights as to the nature of Fe⁺Pc and Ni⁺Pc spectra were obtained. Transformations of chlorophenols using chemical and photochemical methods are presented. For cobalt tetrasulphophthalocyanine catalysed oxidation of chlorophenols using hydrogen peroxide as the oxidant, types of oxidation products formed depended on the solvent conditions. Photolysis of aqueous solutions of chlorophenols in the presence of immobilised non-transition metal phthalocyanine photosensitisers onto Amerlite® was carried out. For the first time, MPcS[subscript mix] complexes were immobilised on Amberlite® for use in heterogeneous photocatalysis. Photolysis of the chlorophenols resulted mainly in the formation of chlorobenzoquinone derivatives. The generation of singlet oxygen (¹O₂) by these immobilised MPc photosensitisers was found to play a major role in their photoactivities. Modifications of gold electrodes with the newly synthesised thiol-derivatised MPc complexes via electropolymerisation and SAM techniques are presented. Cyclic voltammetry, impedance spectroscopy (NiPcs only) and spectroelectrochemical techniques (NiPcs only) confirmed that the complexes formed films on gold electrodes. Stable and well packed SAM films as evidenced by the voltammetric characterisation were obtained. For the first time, optimisation of the time for SAM formation based on CV technique was studied. First example of a formation of MnPc-SAM was achieved. Catalytic activities of the NiPc towards chlorophenol depended on the nature of the NiPc in the polymer films and also anti-fouling ability of the films depended on polymer film thickness. The FeTBMPc polymer modified gold electrode showed the best catalytic activity in terms of peak potential, E[subscript p] when compared to reported work in literature for nitrate electrooxidation. Cyclic voltammetry and spectroscopy studies showed that the CoPcs, FePcs and NiPcs catalysed nitrite oxidation involve 2 electrons in total while that of McPcs involve 1 electron. Better catalytic performance towards sulphite electrooxidation were obtained for the CoPcs, FePcs and MnPcs which have metal based redox processes within the range of the sulphite electrooxidation peak while the NiPcs which did not show metal based oxidation reaction performed less.
- Full Text:
- Date Issued: 2007
- «
- ‹
- 1
- ›
- »