Development of an enzyme-synergy based bioreactor system for the beneficiation of apple pomace lignocellulosic waste
- Authors: Abboo, Sagaran
- Date: 2016
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/315 , vital:19947
- Description: Due to the finite supply of non-renewable fossil fuels, agro-industrial wastes are identified as alternate, renewable sources for energy supply. Large amounts of fruit waste are generated in South Africa due to fruit juice and wine processing from apples, grapes and citrus fruit. Apple pomace is the solid residue that is left over after juice, cider and wine processing and constitutes between 25-30% of the total fruit. On a global scale millions of tonnes of apple pomace are produced; between 2006-2007 over 46 million tonnes were produced. In South Africa a total production of 244 469 tonnes were produced during the 2011- 2012 season. Initially, apple pomace was regarded as a waste by-product used for animal feed and compost in soil, however presently it is considered a source of dietary fiber and natural antioxidants like polyphenols. In addition, apple pomace has a high carbohydrate content and can be enzymatically hydrolysed to produce sugar monomers which, in turn, can be fermented by yeasts to produce bioethanol. The polyphenols present in apple pomace can be used for their health properties, and the bioethanol can be used as a replacement for fossil fuel. Apple pomace is lignocellulosic in nature and consists of hemicellulose, cellulose, lignin and pectin. A combination of enzymes such as cellulases, hemicellulases, pectinases and lignases are required to operate in synergy for the degradation of lignocellulosic biomass. This is due to the recalcitrant nature of lignocellulose. This study investigated the degradation of apple pomace using a combination of commercially obtained enzyme cocktails viz. Viscozyme L , Celluclast 1.5L and Novozyme 188. The commercial enzymes Viscozyme L and Celluclast 1.5L were added in a ratio of 1:1 (50%:50%). The final concentrations of the enzymes were 0.019 mg/ml each. Novozyme 188 was added to provide a final concentration of 0.0024 mg/ml. A novel cost effective 20L bioreactor was designed, constructed and implemented for the degradation of apple pomace to produce value added products. The hydrolysis of the apple pomace was performed initially in 1 L flasks (batch fed) and, once optimized, scaled up to a 20 L bioreactor in batch mode. The bioreactors were operated at room temperature (22 ± 2ºC) and in an unbuffered system. The sugars released were detected and quantified using an optimized validated HPLC method established in this study. The sugars released in the bioreactors were mainly glucose, galactose, arabinose, cellobiose and fructose. The polyphenols released in this study were gallic acid, catechin, epicatechin, chlorogenic acid, rutin and phloridzin, which have a number of health benefits. The simultaneous analyses of the polyphenols were performed using a newly developed and validated HPLC method established in this study. This method was developed to detect nine polyphenols simultaneously. The two HPLC methods developed and validated in this study for the analysis of sugars and polyphenols demonstrated good accuracy, precision, reproducibility, linearity, robustness and sensitivity. Both analytical methods were validated according to the International Convention on Harmonization (ICH). The HPLC parameters for sugar analysis were: refractive index (RI) as the detection mode, the stationary phase was a ligand-exchange sugar column (Shodex SP0810) and an aqueous mobile phase in isocratic mode was used. The HPLC method for polyphenols employed UV diode array detection (DAD) as the detection mode, a reverse phase column as the stationary phase and a mobile phase of consisting of 0.01 M phosphoric acid in water and 100% methanol using gradient elution mode. The highest concentrations of sugars released in the novel 20 L bioreactor with 20% apple pomace (w/v) substrate loading were as follow: glucose (6.5 mg/ml), followed by galactose (2.1 mg/ml), arabinose (1.4 mg/ml), cellobiose (0.7 mg/ml) and fructose (0.5 mg/ml). The amounts of polyphenols released at 20% (w/v) apple pomace substrate were epicatechin (0.01 mg/ml), catechin (0.002 mg/ml), rutin (0.03 mg/ml), chlorogenic acid (0.002 mg/ml) and gallic acid 0.01 (mg/ml). Two mathematical models were developed in this study for kinetic analysis of lignocellulose (apple pomace) hydrolysis in the novel 20 L bioreactor, using the experimental data generated by the above HPLC analyses. The first model, modelling with regression, defines the hydrolysis of the sugars glucose, galactose, cellobiose and arabinose produced in the novel 20 L bioreactor at 5%, 10%, 15% and 20% (w/v) substrate concentrations. The regression model describes the sugars produced in the 20 L bioreactor by minimizing the error of the sugars released by finding a value for K which minimises the function which computes the sum of squares of errors between the solution curves and the data points. The second, more complex, model developed in this study used a system of differential equations model (ODE). This model solved the system by using a numerical method, such as the Runge-Kutta method, then fitted the solution curves to the data. Both models simulated (and had the ability to predict) the production of sugars in the novel 20 L bioreactor for apple pomace hydrolysis. These two models also revealed the time at which the maximum amount of sugars were released, which revealed the optimum time to run the 20 L bioreactor in order to be more cost effective. The optimum time for maximum glucose (the main sugar used in fermentation for biofuel production) release was determined to be around 60 h. The ODE model, in addition, determined the rate at which the substrate became depleted, as well as the rate at which the enzymes became deactivated for the various substrate loadings in the 20 L bioreactor. A third model was developed to determine the optimal running cost of the bioreactor which incorporated the substrate loading and the amount of glucose (g/L) produced. The novel 20 L bioreactor constructed from cost effective materials demonstrated that agro-industrial waste can be converted to value-added products by lignocellolytic enzymes. The sugars released from apple pomace can be used in biofuel production and the polyphenols as food supplements and nutraceuticals for health benefits. This novel study contributes to agro-industrial waste beneficiation via fuel production. In addition, using agro-industrial waste for the generation of value added products (instead of mere disposal) will help prevent environmental pollution.
- Full Text:
- Authors: Abboo, Sagaran
- Date: 2016
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/315 , vital:19947
- Description: Due to the finite supply of non-renewable fossil fuels, agro-industrial wastes are identified as alternate, renewable sources for energy supply. Large amounts of fruit waste are generated in South Africa due to fruit juice and wine processing from apples, grapes and citrus fruit. Apple pomace is the solid residue that is left over after juice, cider and wine processing and constitutes between 25-30% of the total fruit. On a global scale millions of tonnes of apple pomace are produced; between 2006-2007 over 46 million tonnes were produced. In South Africa a total production of 244 469 tonnes were produced during the 2011- 2012 season. Initially, apple pomace was regarded as a waste by-product used for animal feed and compost in soil, however presently it is considered a source of dietary fiber and natural antioxidants like polyphenols. In addition, apple pomace has a high carbohydrate content and can be enzymatically hydrolysed to produce sugar monomers which, in turn, can be fermented by yeasts to produce bioethanol. The polyphenols present in apple pomace can be used for their health properties, and the bioethanol can be used as a replacement for fossil fuel. Apple pomace is lignocellulosic in nature and consists of hemicellulose, cellulose, lignin and pectin. A combination of enzymes such as cellulases, hemicellulases, pectinases and lignases are required to operate in synergy for the degradation of lignocellulosic biomass. This is due to the recalcitrant nature of lignocellulose. This study investigated the degradation of apple pomace using a combination of commercially obtained enzyme cocktails viz. Viscozyme L , Celluclast 1.5L and Novozyme 188. The commercial enzymes Viscozyme L and Celluclast 1.5L were added in a ratio of 1:1 (50%:50%). The final concentrations of the enzymes were 0.019 mg/ml each. Novozyme 188 was added to provide a final concentration of 0.0024 mg/ml. A novel cost effective 20L bioreactor was designed, constructed and implemented for the degradation of apple pomace to produce value added products. The hydrolysis of the apple pomace was performed initially in 1 L flasks (batch fed) and, once optimized, scaled up to a 20 L bioreactor in batch mode. The bioreactors were operated at room temperature (22 ± 2ºC) and in an unbuffered system. The sugars released were detected and quantified using an optimized validated HPLC method established in this study. The sugars released in the bioreactors were mainly glucose, galactose, arabinose, cellobiose and fructose. The polyphenols released in this study were gallic acid, catechin, epicatechin, chlorogenic acid, rutin and phloridzin, which have a number of health benefits. The simultaneous analyses of the polyphenols were performed using a newly developed and validated HPLC method established in this study. This method was developed to detect nine polyphenols simultaneously. The two HPLC methods developed and validated in this study for the analysis of sugars and polyphenols demonstrated good accuracy, precision, reproducibility, linearity, robustness and sensitivity. Both analytical methods were validated according to the International Convention on Harmonization (ICH). The HPLC parameters for sugar analysis were: refractive index (RI) as the detection mode, the stationary phase was a ligand-exchange sugar column (Shodex SP0810) and an aqueous mobile phase in isocratic mode was used. The HPLC method for polyphenols employed UV diode array detection (DAD) as the detection mode, a reverse phase column as the stationary phase and a mobile phase of consisting of 0.01 M phosphoric acid in water and 100% methanol using gradient elution mode. The highest concentrations of sugars released in the novel 20 L bioreactor with 20% apple pomace (w/v) substrate loading were as follow: glucose (6.5 mg/ml), followed by galactose (2.1 mg/ml), arabinose (1.4 mg/ml), cellobiose (0.7 mg/ml) and fructose (0.5 mg/ml). The amounts of polyphenols released at 20% (w/v) apple pomace substrate were epicatechin (0.01 mg/ml), catechin (0.002 mg/ml), rutin (0.03 mg/ml), chlorogenic acid (0.002 mg/ml) and gallic acid 0.01 (mg/ml). Two mathematical models were developed in this study for kinetic analysis of lignocellulose (apple pomace) hydrolysis in the novel 20 L bioreactor, using the experimental data generated by the above HPLC analyses. The first model, modelling with regression, defines the hydrolysis of the sugars glucose, galactose, cellobiose and arabinose produced in the novel 20 L bioreactor at 5%, 10%, 15% and 20% (w/v) substrate concentrations. The regression model describes the sugars produced in the 20 L bioreactor by minimizing the error of the sugars released by finding a value for K which minimises the function which computes the sum of squares of errors between the solution curves and the data points. The second, more complex, model developed in this study used a system of differential equations model (ODE). This model solved the system by using a numerical method, such as the Runge-Kutta method, then fitted the solution curves to the data. Both models simulated (and had the ability to predict) the production of sugars in the novel 20 L bioreactor for apple pomace hydrolysis. These two models also revealed the time at which the maximum amount of sugars were released, which revealed the optimum time to run the 20 L bioreactor in order to be more cost effective. The optimum time for maximum glucose (the main sugar used in fermentation for biofuel production) release was determined to be around 60 h. The ODE model, in addition, determined the rate at which the substrate became depleted, as well as the rate at which the enzymes became deactivated for the various substrate loadings in the 20 L bioreactor. A third model was developed to determine the optimal running cost of the bioreactor which incorporated the substrate loading and the amount of glucose (g/L) produced. The novel 20 L bioreactor constructed from cost effective materials demonstrated that agro-industrial waste can be converted to value-added products by lignocellolytic enzymes. The sugars released from apple pomace can be used in biofuel production and the polyphenols as food supplements and nutraceuticals for health benefits. This novel study contributes to agro-industrial waste beneficiation via fuel production. In addition, using agro-industrial waste for the generation of value added products (instead of mere disposal) will help prevent environmental pollution.
- Full Text:
Rapid enzymatic detection of organophosphorous and carbamate pesticides in water
- Authors: Mwila, Katayi
- Date: 2012
- Subjects: Organophosphorus compounds , Carbamates , Water -- Pesticide content -- South Africa -- Eastern Cape , Water quality biological assessment -- South Africa -- Eastern Cape , Water quality management -- South Africa -- Eastern Cape , Pesticides -- Toxicology -- South Africa -- Eastern Cape , Biological assay , Acetylcholinesterase , Parathion , Aldicarb , Carbaryl , Carbofuran , Nitrophenols
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4024 , http://hdl.handle.net/10962/d1004084 , Organophosphorus compounds , Carbamates , Water -- Pesticide content -- South Africa -- Eastern Cape , Water quality biological assessment -- South Africa -- Eastern Cape , Water quality management -- South Africa -- Eastern Cape , Pesticides -- Toxicology -- South Africa -- Eastern Cape , Biological assay , Acetylcholinesterase , Parathion , Aldicarb , Carbaryl , Carbofuran , Nitrophenols
- Description: The increased use of pesticides has resulted in a corresponding increase in concern for the effect they may have on the health of humans and other non-target organisms. The two main areas of concern are the toxicological effects that mixtures of pesticides may have as well as the endocrine disrupting effects. Although the individual pesticides may be present at concentrations below the levels deemed to be detrimental to health, it has been argued that their combined effect may still result in elevated health risks. Another important aspect of pesticide risk assessment requires a consideration of the breakdown products of pesticides and their effect on human health. There has been very little research into the effects of degradation products and this issue should be addressed as these could potentially pose a higher risk than their parent compounds. One of the most important bio-markers available for use is the ubiquitous enzyme acetylcholinesterase (AChE). This enzyme is responsible for one of the most important functions in the body; namely nerve impulse transmission, upon which all life depends. The inhibition of this enzyme indicates toxicity and as a subsequence, a threat to the organism’s well-being. Bioassays have also recently been developed to test chemicals for endocrine disrupting effects. These tests rely on a dose response equivalent to that of the most potent well known estrogen 17-β estradiol. Any chemical that has a measurable response is deemed to display endocrine disrupting effects. This first aim of this study was to investigate the toxicological and endocrine disrupting effects of three organophosphorus pesticides; aldicarb, parathion and demeton-S-methyl, in addition to two breakdown products; aminophenol and p-nitrophenol. Two carbamate pesticides; carbaryl and carbofuran were also analysed. The toxicological effects of mixtures of the parent pesticide compounds were tested to assess if any antagonistic, additive or synergistic effects were observed. This data was then used in conjunction with an artificial neural network to assess if individual pesticides could be distinguished from mixtures of pesticides. A final objective was to sample various Eastern Cape water sources, utilising the enzymatic assay to determine the presence of any of these pesticides in these samples. There were several conclusions drawn from this study. AChE was successfully used as an assay to test the toxicity of the pesticides under investigation, based on their inhibition of this enzyme. An important factor for consideration throughout the study was the need to establish basal and monitor AChE activity (i.e. the need to monitor AChE activity in the absence of any pesticide). This ensured accurate comparison of the results obtained. It was found that demeton-S-methyl was the most potent of these pesticides followed by carbaryl, parathion, aldicarb and finally carbofuran, and that carbofuran could potentiate AChE. The results indicated that pesticide mixtures generally exhibited an additive inhibitory effect on AChE, although at some concentrations of pesticides, synergistic and antagonistic effects were noted. From the data using mixtures of pesticides, a feed forward neural network was created that was successfully able to distinguish individual pesticides from mixtures within its training parameters. None of the pesticides tested displayed endocrine disrupting properties in the Yeast Estrogen Screen (YES), T47D-KBluc and MDA-kb2 bio-assays. Other studies reported mixed results in this regard and thus no final conclusions could be drawn. The Blaauwkrantz River, Kariega River, Sundays River, Swartkops River and Kowie River were all tested for pesticides and although positive results were recorded, conventional methods indicated that there were no pesticides in the rivers. There were, however, trace metals present which are known to inhibit AChE, thus causing a false positive result. These results indicated that AChE can be used as a high throughput initial pre-screening tool, but that it cannot serve as a substitute for more accurate conventional testing methods.
- Full Text:
- Authors: Mwila, Katayi
- Date: 2012
- Subjects: Organophosphorus compounds , Carbamates , Water -- Pesticide content -- South Africa -- Eastern Cape , Water quality biological assessment -- South Africa -- Eastern Cape , Water quality management -- South Africa -- Eastern Cape , Pesticides -- Toxicology -- South Africa -- Eastern Cape , Biological assay , Acetylcholinesterase , Parathion , Aldicarb , Carbaryl , Carbofuran , Nitrophenols
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4024 , http://hdl.handle.net/10962/d1004084 , Organophosphorus compounds , Carbamates , Water -- Pesticide content -- South Africa -- Eastern Cape , Water quality biological assessment -- South Africa -- Eastern Cape , Water quality management -- South Africa -- Eastern Cape , Pesticides -- Toxicology -- South Africa -- Eastern Cape , Biological assay , Acetylcholinesterase , Parathion , Aldicarb , Carbaryl , Carbofuran , Nitrophenols
- Description: The increased use of pesticides has resulted in a corresponding increase in concern for the effect they may have on the health of humans and other non-target organisms. The two main areas of concern are the toxicological effects that mixtures of pesticides may have as well as the endocrine disrupting effects. Although the individual pesticides may be present at concentrations below the levels deemed to be detrimental to health, it has been argued that their combined effect may still result in elevated health risks. Another important aspect of pesticide risk assessment requires a consideration of the breakdown products of pesticides and their effect on human health. There has been very little research into the effects of degradation products and this issue should be addressed as these could potentially pose a higher risk than their parent compounds. One of the most important bio-markers available for use is the ubiquitous enzyme acetylcholinesterase (AChE). This enzyme is responsible for one of the most important functions in the body; namely nerve impulse transmission, upon which all life depends. The inhibition of this enzyme indicates toxicity and as a subsequence, a threat to the organism’s well-being. Bioassays have also recently been developed to test chemicals for endocrine disrupting effects. These tests rely on a dose response equivalent to that of the most potent well known estrogen 17-β estradiol. Any chemical that has a measurable response is deemed to display endocrine disrupting effects. This first aim of this study was to investigate the toxicological and endocrine disrupting effects of three organophosphorus pesticides; aldicarb, parathion and demeton-S-methyl, in addition to two breakdown products; aminophenol and p-nitrophenol. Two carbamate pesticides; carbaryl and carbofuran were also analysed. The toxicological effects of mixtures of the parent pesticide compounds were tested to assess if any antagonistic, additive or synergistic effects were observed. This data was then used in conjunction with an artificial neural network to assess if individual pesticides could be distinguished from mixtures of pesticides. A final objective was to sample various Eastern Cape water sources, utilising the enzymatic assay to determine the presence of any of these pesticides in these samples. There were several conclusions drawn from this study. AChE was successfully used as an assay to test the toxicity of the pesticides under investigation, based on their inhibition of this enzyme. An important factor for consideration throughout the study was the need to establish basal and monitor AChE activity (i.e. the need to monitor AChE activity in the absence of any pesticide). This ensured accurate comparison of the results obtained. It was found that demeton-S-methyl was the most potent of these pesticides followed by carbaryl, parathion, aldicarb and finally carbofuran, and that carbofuran could potentiate AChE. The results indicated that pesticide mixtures generally exhibited an additive inhibitory effect on AChE, although at some concentrations of pesticides, synergistic and antagonistic effects were noted. From the data using mixtures of pesticides, a feed forward neural network was created that was successfully able to distinguish individual pesticides from mixtures within its training parameters. None of the pesticides tested displayed endocrine disrupting properties in the Yeast Estrogen Screen (YES), T47D-KBluc and MDA-kb2 bio-assays. Other studies reported mixed results in this regard and thus no final conclusions could be drawn. The Blaauwkrantz River, Kariega River, Sundays River, Swartkops River and Kowie River were all tested for pesticides and although positive results were recorded, conventional methods indicated that there were no pesticides in the rivers. There were, however, trace metals present which are known to inhibit AChE, thus causing a false positive result. These results indicated that AChE can be used as a high throughput initial pre-screening tool, but that it cannot serve as a substitute for more accurate conventional testing methods.
- Full Text:
Phenolic compounds in water and the implications for rapid detection of indicator micro-organisms using ß-D-Galactosidase and ß-D-Glucuronidase
- Authors: Abboo, Sagaran
- Date: 2009
- Subjects: Water -- Purification -- Biological treatment , Pollutants -- Biodegradation , Phenol , Organic water pollutants , Water quality biological assessment , Water -- Pollution
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3978 , http://hdl.handle.net/10962/d1004037 , Water -- Purification -- Biological treatment , Pollutants -- Biodegradation , Phenol , Organic water pollutants , Water quality biological assessment , Water -- Pollution
- Description: Faecal contamination in water is detected using appropriate microbial models such as total coliforms, faecal coliforms and E. coli. Βeta-D-Galactosidase (β-GAL) and Beta-D-glucuronidase (β-GUD) are two marker enzymes that are used to test for the presence of total coliforms and E. coli in water samples, respectively. Various assay methods have been developed using chromogenic and fluorogenic substrates. In this study, the chromogenic substrates chlorophenol red β-D-galactopyranoside (CPRG) for β-GAL and p-nitrophenyl-β-D-galactopyranoside (PNPG) for β-GUD were used. Potential problems associated with this approach include interference from other organisms present in the environment (e.g. plants, algae and other bacteria), as well as the presence of certain chemicals, such as phenolic compounds in water. Phenolic compounds are present in the aquatic environment due to their extensive industrial applications. The USA Enviromental Protection Agency (EPA) lists 11 Priority Pollutant Phenols (PPP) due to their high level of toxicity. This study investigated the interfering effects of the eleven PPP found in water on the enzyme activities of both the β-GAL and β-GUD enzyme assays. The presence of these PPP in the β-GAL and β-GUD enzyme assays showed that over and underestimation of activity may occur due to inhibition or activation of these enzymes. Three types of inhibition to enzyme activities were identified from double reciprocal Lineweaver-Burk plots. The inhibition constants (Ki) were determined for all inhibitory phenolic compounds from appropriate secondary plots. Furthermore, this study presented a validated reverse phase high performance liquid chromatography (RP-HPLC) method, developed for the simultaneous detection, separation and determination of all eleven phenolic compounds found in the environment. This method demonstrated good linearity, reproducibility, accuracy and sensitivity. Environmental water samples were collected from rivers, streams, industrial sites and wastewater treatment plant effluent. These samples were extracted and concentrated using a solid phase extraction (SPE) procedure prior to analysis employing the newly developed HPLC method in this study. Seasonal variations on the presence of the PPP in the environment were observed at certain collection sites. The concentrations found were between 0.033 μg/ml for 2,4-dinitrophenol in a running stream to 0.890 mg/ml for pentachlorophenol from an tannery industrial site. These concentrations of phenolic compounds found in these environments were able to interfere with the β-GAL and β-GUD enzyme assays.
- Full Text:
- Authors: Abboo, Sagaran
- Date: 2009
- Subjects: Water -- Purification -- Biological treatment , Pollutants -- Biodegradation , Phenol , Organic water pollutants , Water quality biological assessment , Water -- Pollution
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3978 , http://hdl.handle.net/10962/d1004037 , Water -- Purification -- Biological treatment , Pollutants -- Biodegradation , Phenol , Organic water pollutants , Water quality biological assessment , Water -- Pollution
- Description: Faecal contamination in water is detected using appropriate microbial models such as total coliforms, faecal coliforms and E. coli. Βeta-D-Galactosidase (β-GAL) and Beta-D-glucuronidase (β-GUD) are two marker enzymes that are used to test for the presence of total coliforms and E. coli in water samples, respectively. Various assay methods have been developed using chromogenic and fluorogenic substrates. In this study, the chromogenic substrates chlorophenol red β-D-galactopyranoside (CPRG) for β-GAL and p-nitrophenyl-β-D-galactopyranoside (PNPG) for β-GUD were used. Potential problems associated with this approach include interference from other organisms present in the environment (e.g. plants, algae and other bacteria), as well as the presence of certain chemicals, such as phenolic compounds in water. Phenolic compounds are present in the aquatic environment due to their extensive industrial applications. The USA Enviromental Protection Agency (EPA) lists 11 Priority Pollutant Phenols (PPP) due to their high level of toxicity. This study investigated the interfering effects of the eleven PPP found in water on the enzyme activities of both the β-GAL and β-GUD enzyme assays. The presence of these PPP in the β-GAL and β-GUD enzyme assays showed that over and underestimation of activity may occur due to inhibition or activation of these enzymes. Three types of inhibition to enzyme activities were identified from double reciprocal Lineweaver-Burk plots. The inhibition constants (Ki) were determined for all inhibitory phenolic compounds from appropriate secondary plots. Furthermore, this study presented a validated reverse phase high performance liquid chromatography (RP-HPLC) method, developed for the simultaneous detection, separation and determination of all eleven phenolic compounds found in the environment. This method demonstrated good linearity, reproducibility, accuracy and sensitivity. Environmental water samples were collected from rivers, streams, industrial sites and wastewater treatment plant effluent. These samples were extracted and concentrated using a solid phase extraction (SPE) procedure prior to analysis employing the newly developed HPLC method in this study. Seasonal variations on the presence of the PPP in the environment were observed at certain collection sites. The concentrations found were between 0.033 μg/ml for 2,4-dinitrophenol in a running stream to 0.890 mg/ml for pentachlorophenol from an tannery industrial site. These concentrations of phenolic compounds found in these environments were able to interfere with the β-GAL and β-GUD enzyme assays.
- Full Text:
Development of a novel in situ CPRG-based biosensor and bioprobe for monitoring coliform β-D-Galactosidase in water polluted by faecal matter
- Authors: Wutor, Victor Collins
- Date: 2008
- Subjects: Biosensors Molecular probes Enterobacteriaceae Feces -- Microbiology Water -- Pollution -- Environmental aspects Environmental monitoring Chromogenic compounds
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3944 , http://hdl.handle.net/10962/d1004003
- Description: The ultimate objective of this work was to develop a real-time method for detecting and monitoring β-D-galactosidase as a suitable indicator of the potential presence of total coliform bacteria in water environments. Preliminary comparison of the chromogenic substrate, chlorophenol red β-D-galactopyranoside and the fluorogenic substrate, MuGAL, revealed unreliable results with the fluorogenic technique due to interference from compounds commonly found in environmental water samples. Thus, the chromogenic assay was further explored. Hydrolysis of the chromogenic substrate chlorophenol red β-D-galactopyranoside by β-D-galactosidase to yield chlorophenol red was the basis of this assay. Fundamental studies with chlorophenol red β-Dgalactopyranoside showed that β-D-galactosidase occurs extracellularly and in low concentrations in the polluted water environment. A direct correlation between enzyme activity and an increase in environmental water sample volume, as well as enzyme activity with total coliform colony forming unit counts were observed. Spectrophotometric detection was achieved within a maximum period of 24 h with a limit of detection level of 1 colony forming unit 100 ml[superscript -1]. This enzyme also exhibited physical and kinetic properties different from those of the pure commercially available β-D-galactosidase. Cell permeabilisation was not required for releasing enzymes into the extracellular environment. PEG 20 000 offered the best option for concentrating β-D-galactosidase. The source of β-D-galactosidase in the polluted environmental water samples was confirmed as Escherichia coli through SDS-PAGE, tryptic mapping and MALDI-TOF, thus justifying the further use of this method for detecting and/or monitoring total coliforms. Several compounds and metal ions commonly found in environmental water samples (as well as those used in water treatment processes) did have an effect on β-D-galactosidase. All the divalent cations except Mg [superscript 2+], at the concentrations studied, inhibited the relative activity of β-D-galactosidase in both commercial β-D-galactosidase and environmental samples. Immobilisation of chlorophenol red β-D-galactopyranoside onto a solid support material for the development of a strip bioprobe was unsuccessful, even though the nylon support material yielded some positive results. A monthly (seasonal) variation in β-Dgalactosidase activity from the environmental water samples was observed, with the highest activity coinciding with the highest monthly temperatures. Electro-oxidative detection and/or monitoring of chlorophenol red was possible. Chlorophenol red detection was linear over a wide range of concentrations (0.001-0.01 μg ml[superscript -1]). Interference by chlorophenol red β-D-galactopyranoside in the reduction window affected analysis. A range of phthalocyanine metal complexes were studied in an attempt to reduce fouling and/or increase the sensitivity of the biosensor. The selected phthalocyanine metal complexes were generally sensitive to changes in pH with a reduction in sensitivity from acidic pH to alkaline pH. The tetrasulphonated phthalocyanine metal complex of copper was, however, more stable with a minimum change of sensitivity. The phthalocyanine metal complexes were generally stable to changes in temperature. While only two consecutive scans were possible with the unmodified glassy carbon electrode, 77 consecutive scans were performed successfully with the CuPc-modified glassy carbon electrode. Among the phthalocyanine metal complexes studied, the CuPc-modified glassy carbon electrode therefore provided excellent results for the development of a biosensor. The CuPc modified-glassy carbon electrode detected 1 colony forming unit 100 ml[superscript -1] in 15 minutes, while the plain unmodified glassy carbon electrode required 6 hours to detect the equivalent number of colony forming units. CoPc, ZnPc and CuTSPc required 2, 2.25 and 1.75 h, respectively, to detect the same numbers of colony forming units. The CuPcmodified glassy carbon electrode detected 40 colony forming units 100 ml[superscript -1] instantly. In general, a direct correlation between colony forming units and current generated in the sensor was observed (R2=0.92). A higher correlation coefficient of 0.99 for 0-30 coliform colony forming units 100 ml[superscript -1] was determined. Current was detected in some water samples which did not show any colony forming units on the media, probably due to the phenomenon of viable but non-culturable bacteria, which is the major disadvantage encountered in the use of media for detecting indicator microorganisms. This novel biosensor therefore presents a very robust and sensitive technique for the detection and/or monitoring of coliform bacterial activity in water.
- Full Text:
- Authors: Wutor, Victor Collins
- Date: 2008
- Subjects: Biosensors Molecular probes Enterobacteriaceae Feces -- Microbiology Water -- Pollution -- Environmental aspects Environmental monitoring Chromogenic compounds
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3944 , http://hdl.handle.net/10962/d1004003
- Description: The ultimate objective of this work was to develop a real-time method for detecting and monitoring β-D-galactosidase as a suitable indicator of the potential presence of total coliform bacteria in water environments. Preliminary comparison of the chromogenic substrate, chlorophenol red β-D-galactopyranoside and the fluorogenic substrate, MuGAL, revealed unreliable results with the fluorogenic technique due to interference from compounds commonly found in environmental water samples. Thus, the chromogenic assay was further explored. Hydrolysis of the chromogenic substrate chlorophenol red β-D-galactopyranoside by β-D-galactosidase to yield chlorophenol red was the basis of this assay. Fundamental studies with chlorophenol red β-Dgalactopyranoside showed that β-D-galactosidase occurs extracellularly and in low concentrations in the polluted water environment. A direct correlation between enzyme activity and an increase in environmental water sample volume, as well as enzyme activity with total coliform colony forming unit counts were observed. Spectrophotometric detection was achieved within a maximum period of 24 h with a limit of detection level of 1 colony forming unit 100 ml[superscript -1]. This enzyme also exhibited physical and kinetic properties different from those of the pure commercially available β-D-galactosidase. Cell permeabilisation was not required for releasing enzymes into the extracellular environment. PEG 20 000 offered the best option for concentrating β-D-galactosidase. The source of β-D-galactosidase in the polluted environmental water samples was confirmed as Escherichia coli through SDS-PAGE, tryptic mapping and MALDI-TOF, thus justifying the further use of this method for detecting and/or monitoring total coliforms. Several compounds and metal ions commonly found in environmental water samples (as well as those used in water treatment processes) did have an effect on β-D-galactosidase. All the divalent cations except Mg [superscript 2+], at the concentrations studied, inhibited the relative activity of β-D-galactosidase in both commercial β-D-galactosidase and environmental samples. Immobilisation of chlorophenol red β-D-galactopyranoside onto a solid support material for the development of a strip bioprobe was unsuccessful, even though the nylon support material yielded some positive results. A monthly (seasonal) variation in β-Dgalactosidase activity from the environmental water samples was observed, with the highest activity coinciding with the highest monthly temperatures. Electro-oxidative detection and/or monitoring of chlorophenol red was possible. Chlorophenol red detection was linear over a wide range of concentrations (0.001-0.01 μg ml[superscript -1]). Interference by chlorophenol red β-D-galactopyranoside in the reduction window affected analysis. A range of phthalocyanine metal complexes were studied in an attempt to reduce fouling and/or increase the sensitivity of the biosensor. The selected phthalocyanine metal complexes were generally sensitive to changes in pH with a reduction in sensitivity from acidic pH to alkaline pH. The tetrasulphonated phthalocyanine metal complex of copper was, however, more stable with a minimum change of sensitivity. The phthalocyanine metal complexes were generally stable to changes in temperature. While only two consecutive scans were possible with the unmodified glassy carbon electrode, 77 consecutive scans were performed successfully with the CuPc-modified glassy carbon electrode. Among the phthalocyanine metal complexes studied, the CuPc-modified glassy carbon electrode therefore provided excellent results for the development of a biosensor. The CuPc modified-glassy carbon electrode detected 1 colony forming unit 100 ml[superscript -1] in 15 minutes, while the plain unmodified glassy carbon electrode required 6 hours to detect the equivalent number of colony forming units. CoPc, ZnPc and CuTSPc required 2, 2.25 and 1.75 h, respectively, to detect the same numbers of colony forming units. The CuPcmodified glassy carbon electrode detected 40 colony forming units 100 ml[superscript -1] instantly. In general, a direct correlation between colony forming units and current generated in the sensor was observed (R2=0.92). A higher correlation coefficient of 0.99 for 0-30 coliform colony forming units 100 ml[superscript -1] was determined. Current was detected in some water samples which did not show any colony forming units on the media, probably due to the phenomenon of viable but non-culturable bacteria, which is the major disadvantage encountered in the use of media for detecting indicator microorganisms. This novel biosensor therefore presents a very robust and sensitive technique for the detection and/or monitoring of coliform bacterial activity in water.
- Full Text:
Development of an in-situ ß-D-Glucuronidase diagnostic moraxella-based biosensor for potential application in the monitoring of water polluted by faecal material in South Africa
- Authors: Togo, Chamunorwa Aloius
- Date: 2007
- Subjects: Water quality management -- South Africa Water quality bioassay -- South Africa Sewage sludge -- South Africa -- Management Water -- Purification -- Biological treatment -- South Africa Biosensors
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3947 , http://hdl.handle.net/10962/d1004006
- Description: The prevention of outbreaks of waterborne diseases remains a major challenge to public health service providers globally. One of the major obstacles in this effort is the unavailability of on-line and real-time methods for rapid monitoring of faecal pollution to facilitate early warning of contamination of drinking water. The main objective of this study was to develop a β-glucuronidase (GUD)-based method that could be used for the on-line and real-time monitoring of microbial water quality. GUD is a marker enzyme for the faecal indicator bacteria Escherichia coli. This enzyme breaks down the synthetic substrate p-nitrophenyl-β-D-glucuronide (PNPG) to D-glucuronic acid and p-nitrophenol (PNP), which turns yellow under alkaline pH. The enzymatically produced PNP was used to detect GUD activity. In situ GUD assays were performed using running and stagnant water samples from the Bloukrans River, Grahamstown, South Africa. The physico-chemical properties of environmental GUD were determined, after which a liquid bioprobe and a microbial biosensor modified with Moraxella 1A species for the detection of the enzyme activity were developed. In order to determine the reliability and sensitivity of these methods, regression analyses for each method versus E. coli colony forming units (CFU) were performed. The storage stabilities of the bioprobe and biosensor were also investigated. The physico-chemical properties of in situ GUD were different from those of its commercially available counterpart. The temperature optimum for the former was between 35 and 40 °C while for the latter it was 45 °C. Commercial (reference) GUD had a pH optimum of 8.0 while the environmental counterpart exhibited a broad pH optimum of between pH 5.0 and 8.0. The liquid bioprobe had a limit of detection (LOD) of GUD activity equivalent to 2 CFU/100 ml and a detection time of 24 h. The method was less labour intensive and costly than the culturing method. The liquid bioprobe was stable for at least four weeks at room temperature (20 ± 2 °C). The biosensor was prepared by modifying a glassy carbon electrode with PNP degrading Moraxella 1A cells. The biosensor was 100 times more sensitive and rapid (5-20 min) than the spectrophotometric method (24 h), and was also able to detect GUD activity of viable but non-culturable cells. Thus it was more sensitive than the culturing method. Furthermore, the biosensor was selective and costeffective. The possibility of using a Pseudomonas putida JS444 biosensor was also investigated, but it was not as sensitive and selective as the Moraxella 1A biosensor. The Moraxella biosensor, therefore, offered the best option for on-line and real-time microbial water quality monitoring in South African river waters and drinking water supplies.
- Full Text:
- Authors: Togo, Chamunorwa Aloius
- Date: 2007
- Subjects: Water quality management -- South Africa Water quality bioassay -- South Africa Sewage sludge -- South Africa -- Management Water -- Purification -- Biological treatment -- South Africa Biosensors
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3947 , http://hdl.handle.net/10962/d1004006
- Description: The prevention of outbreaks of waterborne diseases remains a major challenge to public health service providers globally. One of the major obstacles in this effort is the unavailability of on-line and real-time methods for rapid monitoring of faecal pollution to facilitate early warning of contamination of drinking water. The main objective of this study was to develop a β-glucuronidase (GUD)-based method that could be used for the on-line and real-time monitoring of microbial water quality. GUD is a marker enzyme for the faecal indicator bacteria Escherichia coli. This enzyme breaks down the synthetic substrate p-nitrophenyl-β-D-glucuronide (PNPG) to D-glucuronic acid and p-nitrophenol (PNP), which turns yellow under alkaline pH. The enzymatically produced PNP was used to detect GUD activity. In situ GUD assays were performed using running and stagnant water samples from the Bloukrans River, Grahamstown, South Africa. The physico-chemical properties of environmental GUD were determined, after which a liquid bioprobe and a microbial biosensor modified with Moraxella 1A species for the detection of the enzyme activity were developed. In order to determine the reliability and sensitivity of these methods, regression analyses for each method versus E. coli colony forming units (CFU) were performed. The storage stabilities of the bioprobe and biosensor were also investigated. The physico-chemical properties of in situ GUD were different from those of its commercially available counterpart. The temperature optimum for the former was between 35 and 40 °C while for the latter it was 45 °C. Commercial (reference) GUD had a pH optimum of 8.0 while the environmental counterpart exhibited a broad pH optimum of between pH 5.0 and 8.0. The liquid bioprobe had a limit of detection (LOD) of GUD activity equivalent to 2 CFU/100 ml and a detection time of 24 h. The method was less labour intensive and costly than the culturing method. The liquid bioprobe was stable for at least four weeks at room temperature (20 ± 2 °C). The biosensor was prepared by modifying a glassy carbon electrode with PNP degrading Moraxella 1A cells. The biosensor was 100 times more sensitive and rapid (5-20 min) than the spectrophotometric method (24 h), and was also able to detect GUD activity of viable but non-culturable cells. Thus it was more sensitive than the culturing method. Furthermore, the biosensor was selective and costeffective. The possibility of using a Pseudomonas putida JS444 biosensor was also investigated, but it was not as sensitive and selective as the Moraxella 1A biosensor. The Moraxella biosensor, therefore, offered the best option for on-line and real-time microbial water quality monitoring in South African river waters and drinking water supplies.
- Full Text:
Isolation of a Clostridium Beijerinckii sLM01 cellulosome and the effect of sulphide on anaerobic digestion
- Authors: Mayende, Lungisa
- Date: 2007
- Subjects: Cellulose , Clostridium , Cellulase , Sulfides
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3973 , http://hdl.handle.net/10962/d1004032 , Cellulose , Clostridium , Cellulase , Sulfides
- Description: Cellulose is the most abundant and the most resistant and stable natural organic compound on earth. Enzyme hydrolysis is difficult because of its insolubility and heterogeneity. Some (anaerobic) microorganisms have overcome this by having a multienzyme system called the cellulosome. The aims of the study were to isolate a mesophilic Clostridium sp. from a biosulphidogenic bioreactor, to purify the cellulosome from this culture, to determine the cellulase and endoglucanase activities using Avicel and carboxymethylcellulose (CMC) as substrates and the dinitrosalicyclic (DNS) method. The organism was identified using 16S rDNA sequence analysis. The sequence obtained indicated that a strain of Clostridium beijerinckii was isolated. The cellulosome was purified from the putative C. beijerinckii sLM01 host culture using affinity chromatography purification and affinity digestion purification procedures. The cellulosomal and non-cellulosomal fractions of C. beijerinckii sLM01 were separated successfully, but the majority of the endoglucanase activity was lost during the Sepharose 4B chromatography step. These cellulosomal and non-cellulosomal fractions were characterised with regards to their pH and temperature optima and effector sensitivity. Increased additions of sulphide activated the cellulase activity of the cellulosomal and non-cellulosomal fractions up to 700 %, while increased additions of sulphate either increased the activity slightly or inhibited it dramatically, depending on the cellulosomal and non-cellulosomal fractions. Increased additions of cellobiose, glucose and acetate inhibited the cellulase and endoglucanase activities. pH optima of 5.0 and 7.5 were observed for cellulases and 5.0 for endoglucanases of the cellulosomal fraction. The noncellulosomal fraction exhibited a pH optimum of 7.5 for both cellulase and endoglucanase activities. Both fractions and enzymes exhibited a temperature optimum of 30 °C. The fundamental knowledge gained from the characterisation was applied to anaerobic digestion, where the effect of sulphide on the rate-limiting step was determined. Sulphide activated cellulase and endoglucanase activities and increased the % chemical oxygen demand (COD) removal rate. Levels of volatile fatty acids (VFAs) were higher in the bioreactor containing sulphide, substrate and C. beijerinckii. Sulphide therefore accelerated the rate-limiting step of anaerobic digestion.
- Full Text:
- Authors: Mayende, Lungisa
- Date: 2007
- Subjects: Cellulose , Clostridium , Cellulase , Sulfides
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3973 , http://hdl.handle.net/10962/d1004032 , Cellulose , Clostridium , Cellulase , Sulfides
- Description: Cellulose is the most abundant and the most resistant and stable natural organic compound on earth. Enzyme hydrolysis is difficult because of its insolubility and heterogeneity. Some (anaerobic) microorganisms have overcome this by having a multienzyme system called the cellulosome. The aims of the study were to isolate a mesophilic Clostridium sp. from a biosulphidogenic bioreactor, to purify the cellulosome from this culture, to determine the cellulase and endoglucanase activities using Avicel and carboxymethylcellulose (CMC) as substrates and the dinitrosalicyclic (DNS) method. The organism was identified using 16S rDNA sequence analysis. The sequence obtained indicated that a strain of Clostridium beijerinckii was isolated. The cellulosome was purified from the putative C. beijerinckii sLM01 host culture using affinity chromatography purification and affinity digestion purification procedures. The cellulosomal and non-cellulosomal fractions of C. beijerinckii sLM01 were separated successfully, but the majority of the endoglucanase activity was lost during the Sepharose 4B chromatography step. These cellulosomal and non-cellulosomal fractions were characterised with regards to their pH and temperature optima and effector sensitivity. Increased additions of sulphide activated the cellulase activity of the cellulosomal and non-cellulosomal fractions up to 700 %, while increased additions of sulphate either increased the activity slightly or inhibited it dramatically, depending on the cellulosomal and non-cellulosomal fractions. Increased additions of cellobiose, glucose and acetate inhibited the cellulase and endoglucanase activities. pH optima of 5.0 and 7.5 were observed for cellulases and 5.0 for endoglucanases of the cellulosomal fraction. The noncellulosomal fraction exhibited a pH optimum of 7.5 for both cellulase and endoglucanase activities. Both fractions and enzymes exhibited a temperature optimum of 30 °C. The fundamental knowledge gained from the characterisation was applied to anaerobic digestion, where the effect of sulphide on the rate-limiting step was determined. Sulphide activated cellulase and endoglucanase activities and increased the % chemical oxygen demand (COD) removal rate. Levels of volatile fatty acids (VFAs) were higher in the bioreactor containing sulphide, substrate and C. beijerinckii. Sulphide therefore accelerated the rate-limiting step of anaerobic digestion.
- Full Text:
- «
- ‹
- 1
- ›
- »