Biochemical characterization of the β-mannanase activity of Bacillus paralicheniformis SVD1
- Authors: Clarke, Matthew David
- Date: 2019
- Subjects: Mycobacterium avium paratuberculosis , Enzymes -- Biotechnology , Lignocellulose -- Biotechnology
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/67570 , vital:29112
- Description: Products produced via the enzymatic hydrolysis of lignocellulosic biomass, the most abundant renewable terrestrial source of carbon, can potentially replace a lot of the fuels and chemicals currently produced using non-renewable hydrocarbons. Mannan is a polysaccharide component of lignocellulose that is abundant in softwoods and legume seeds. Enzymatic hydrolysis of mannan by β-mannanases has various industrial applications, including use in biofuel and prebiotic mannooligosaccharide (MOS) production for the improvement of human and animal health. The industrial use of β-mannanases depends on their biochemical characteristics, such as their activity, stability and substrate specificity. Knowledge of their synergistic interactions with other enzymes is also useful for effective hydrolysis. Bacillus paralicheniformis SVD1 was used as a source for β-mannanases. The two mannanases of B. paralicheniformis SVD1 have not been biochemically characterized apart from minor characterization of crude β-mannanase activity. The protein sequences of the two β-mannanases, of glycosyl hydrolase family 5 and 26, have a 95% - 96% identity to the β-mannanases of B. licheniformis DSM13T (=ATCC14580T). These small protein sequence differences could lead to quite different biochemical characteristics. These mannanases were characterized as these enzymes may have industrially useful characteristics. To induce mannanase production, B. paralicheniformis SVD1 was cultured in broth containing the mannan substrate locust bean gum. Various growth curve parameters were measured over 72 h. Mannanase activity was the highest after 48 h of growth - this was the time at which mannanase activity was concentrated, using 3 kDa centrifugal filtration devices, for biochemical characterization of the crude activity. Zymography revealed that the crude concentrated mannanase fraction consisted of at least two mannanases with relative molecular weights (MWs) of 29.6 kDa and 33 kDa. This was smaller than expected – based on their theoretical molecular masses. Protease activity, which was detected in the broth, was probably the reason. There were two pH optima, pH 5.0 and pH 7.0, which also indicated the presence of two mannanases. The concentrated mannanase displayed characteristics that were expected of a B. paralicheniformis β-mannanase. The temperature optimum was 50°C and the activity loss was less than 7% at 50°C after 24 h. Substrate specificity assays revealed that there was predominantly mannanase activity present. Thin layer chromatography (TLC) analysis of mannan and MOS hydrolysis showed that mainly M2 and M3 MOS were produced; only MOS with a degree of polymerization of 4 or higher were hydrolyzed. Hydrolysis was minimal on mannoligosaccharides with galactose substituents. Activity and MOS production was the highest on soluble, low branched mannan substrates. The highest activity observed was on konjac glucomannan. Purification of the mannanase activity was then attempted using various methods. Ammonium sulfate precipitation, acetone precipitation, as well as centrifugal filtration device concentration was assessed for concentration of the mannanase activity.Concentration was not very successful due to low activity yields (≤ 20%). Anion exchange chromatography (AEC) and size exclusion chromatography (SEC) was used for purification. AEC gave good activity yield and fold purification, but SDS-PAGE analysis revealed the presence of many different proteins so further purification was necessary. SDS-PAGE analysis showed that there were only a few protein contaminants in the SEC fraction. However, the yield was too low to allow for biochemical characterization. The optimized purification procedure, which partially purified the mannanase activity, used 85% ammonium sulfate precipitation, followed by AEC. The fold purification was high (88.9) and the specific activity was 29.5 U.mg-1. A zymogram of the partially purified mannanase showed a mannanase active band with a MW of 40 - 41 kDa. A serine protease inhibitor, phenylmethylsulfonyl fluoride (PMSF), was added during the purification steps. This indicated that the mannanase/s in the crude concentrate, without PMSF added, was hydrolyzed by serine protease activity. Native PAGE zymograms suggested that at least two different isoforms of mannanases were present. Additional purification would be required to determine the true characteristics of the mannanase/s. The biochemical characteristics of the crude and partially purified mannanases were similar. The pH optima of the partially purified mannanases were different; the pH optima were 6.0 and 9.0. The substrate specificities were similar, except that the partially purified mannanases displayed no cellulase and β-D-galactosidase activity, but showed a small amount of α-L-arabinase activity. The partially purified mannanase and a Cyamopsis tetragonolobus GH27 α-galactosidase synergistically hydrolyzed locust bean gum. The M50G50 combination displayed the highest extent of hydrolysis; after 24 h there was a 1.39 fold increase in reducing sugar release and the degree of synergy (DS) was 4.64. TLC analysis indicated that synergy increased the release of small MOS. These MOS could be useful as prebiotics. The synergy between the partially purified mannanase and the commercial cellulase mixture Cellic® CTec2 (Novozymes) on spent coffee grounds (SCG) was also determined. SCG is an abundant industrial waste product that has high mannan content. The SCG was pretreated using NaOH, and the monosaccharide, soluble phenolics and insoluble contents were determined. Glucose and mannose were the dominant monosaccharides in the SCG; the pretreated SCG contained 20.4% (w/w) glucose and 18.5% (w/w) mannose, respectively. The NaOH pretreatment improved mannanase hydrolysis of SCG. It resulted in the opening up and swelling of the SCG particles and removed some of the insoluble solids. The partially purified B. paralicheniformis SVD1 mannanase displayed no detectable activity on SCG, but showed synergy with CTec2, in terms of DS, on untreated and NaOH pretreated SCG. This is the first report of mannanasecellulase synergy on SCG; other studies found that increased hydrolysis was due to additive effects. The results obtained in this study are only an initial assessment of the biochemical properties of B. paralicheniformis SVD1 mannanase activity and its synergy with other enzymes. These results can be used to inform future studies.
- Full Text:
- Authors: Clarke, Matthew David
- Date: 2019
- Subjects: Mycobacterium avium paratuberculosis , Enzymes -- Biotechnology , Lignocellulose -- Biotechnology
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/67570 , vital:29112
- Description: Products produced via the enzymatic hydrolysis of lignocellulosic biomass, the most abundant renewable terrestrial source of carbon, can potentially replace a lot of the fuels and chemicals currently produced using non-renewable hydrocarbons. Mannan is a polysaccharide component of lignocellulose that is abundant in softwoods and legume seeds. Enzymatic hydrolysis of mannan by β-mannanases has various industrial applications, including use in biofuel and prebiotic mannooligosaccharide (MOS) production for the improvement of human and animal health. The industrial use of β-mannanases depends on their biochemical characteristics, such as their activity, stability and substrate specificity. Knowledge of their synergistic interactions with other enzymes is also useful for effective hydrolysis. Bacillus paralicheniformis SVD1 was used as a source for β-mannanases. The two mannanases of B. paralicheniformis SVD1 have not been biochemically characterized apart from minor characterization of crude β-mannanase activity. The protein sequences of the two β-mannanases, of glycosyl hydrolase family 5 and 26, have a 95% - 96% identity to the β-mannanases of B. licheniformis DSM13T (=ATCC14580T). These small protein sequence differences could lead to quite different biochemical characteristics. These mannanases were characterized as these enzymes may have industrially useful characteristics. To induce mannanase production, B. paralicheniformis SVD1 was cultured in broth containing the mannan substrate locust bean gum. Various growth curve parameters were measured over 72 h. Mannanase activity was the highest after 48 h of growth - this was the time at which mannanase activity was concentrated, using 3 kDa centrifugal filtration devices, for biochemical characterization of the crude activity. Zymography revealed that the crude concentrated mannanase fraction consisted of at least two mannanases with relative molecular weights (MWs) of 29.6 kDa and 33 kDa. This was smaller than expected – based on their theoretical molecular masses. Protease activity, which was detected in the broth, was probably the reason. There were two pH optima, pH 5.0 and pH 7.0, which also indicated the presence of two mannanases. The concentrated mannanase displayed characteristics that were expected of a B. paralicheniformis β-mannanase. The temperature optimum was 50°C and the activity loss was less than 7% at 50°C after 24 h. Substrate specificity assays revealed that there was predominantly mannanase activity present. Thin layer chromatography (TLC) analysis of mannan and MOS hydrolysis showed that mainly M2 and M3 MOS were produced; only MOS with a degree of polymerization of 4 or higher were hydrolyzed. Hydrolysis was minimal on mannoligosaccharides with galactose substituents. Activity and MOS production was the highest on soluble, low branched mannan substrates. The highest activity observed was on konjac glucomannan. Purification of the mannanase activity was then attempted using various methods. Ammonium sulfate precipitation, acetone precipitation, as well as centrifugal filtration device concentration was assessed for concentration of the mannanase activity.Concentration was not very successful due to low activity yields (≤ 20%). Anion exchange chromatography (AEC) and size exclusion chromatography (SEC) was used for purification. AEC gave good activity yield and fold purification, but SDS-PAGE analysis revealed the presence of many different proteins so further purification was necessary. SDS-PAGE analysis showed that there were only a few protein contaminants in the SEC fraction. However, the yield was too low to allow for biochemical characterization. The optimized purification procedure, which partially purified the mannanase activity, used 85% ammonium sulfate precipitation, followed by AEC. The fold purification was high (88.9) and the specific activity was 29.5 U.mg-1. A zymogram of the partially purified mannanase showed a mannanase active band with a MW of 40 - 41 kDa. A serine protease inhibitor, phenylmethylsulfonyl fluoride (PMSF), was added during the purification steps. This indicated that the mannanase/s in the crude concentrate, without PMSF added, was hydrolyzed by serine protease activity. Native PAGE zymograms suggested that at least two different isoforms of mannanases were present. Additional purification would be required to determine the true characteristics of the mannanase/s. The biochemical characteristics of the crude and partially purified mannanases were similar. The pH optima of the partially purified mannanases were different; the pH optima were 6.0 and 9.0. The substrate specificities were similar, except that the partially purified mannanases displayed no cellulase and β-D-galactosidase activity, but showed a small amount of α-L-arabinase activity. The partially purified mannanase and a Cyamopsis tetragonolobus GH27 α-galactosidase synergistically hydrolyzed locust bean gum. The M50G50 combination displayed the highest extent of hydrolysis; after 24 h there was a 1.39 fold increase in reducing sugar release and the degree of synergy (DS) was 4.64. TLC analysis indicated that synergy increased the release of small MOS. These MOS could be useful as prebiotics. The synergy between the partially purified mannanase and the commercial cellulase mixture Cellic® CTec2 (Novozymes) on spent coffee grounds (SCG) was also determined. SCG is an abundant industrial waste product that has high mannan content. The SCG was pretreated using NaOH, and the monosaccharide, soluble phenolics and insoluble contents were determined. Glucose and mannose were the dominant monosaccharides in the SCG; the pretreated SCG contained 20.4% (w/w) glucose and 18.5% (w/w) mannose, respectively. The NaOH pretreatment improved mannanase hydrolysis of SCG. It resulted in the opening up and swelling of the SCG particles and removed some of the insoluble solids. The partially purified B. paralicheniformis SVD1 mannanase displayed no detectable activity on SCG, but showed synergy with CTec2, in terms of DS, on untreated and NaOH pretreated SCG. This is the first report of mannanasecellulase synergy on SCG; other studies found that increased hydrolysis was due to additive effects. The results obtained in this study are only an initial assessment of the biochemical properties of B. paralicheniformis SVD1 mannanase activity and its synergy with other enzymes. These results can be used to inform future studies.
- Full Text:
Chitin hydrolysis with chitinolytic enzymes for the production of chitooligomers with antimicrobial properties
- Authors: Oree, Glynis
- Date: 2019
- Subjects: Chitin -- Biotechnology , Enzymes -- Biotechnology , Hydrolysis , Chitooligomers -- Biotechnology
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/67887 , vital:29165
- Description: There are many diseases and illnesses in the world that require new drug treatments and chitin has been shown to produce chitooligomeric derivatives which exhibit promising antimicrobial and immune-enhancing properties. However, the rate-limiting step is associated with the high recalcitrance of chitinous substrates, and low hydrolytic activities of chitinolytic enzymes, resulting in low product release. To improve and create a more sustainable and economical process, enhancing chitin hydrolysis through various treatment procedures is essential for obtaining high enzyme hydrolysis rates, resulting in a higher yield of chitooligomers (CHOS). In literature, pre-treatment of insoluble biomass is generally associated with an increase in accessibility of the carbohydrate to hydrolytic enzymes, thus generating more products. The first part of this study investigated the effect of alkali- (NaOH) and acid pre-treatments (HCl and phosphoric acid) on chitin biomass, and chemical and morphological modifications were assessed by the employment of scanning electron microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), Energy-Dispersive X-ray spectrometery (EDX) and x-ray diffraction (XRD). Data obtained confirmed that pre-treated substrates were more chemically and morphologically modified. These results confirmed the fact that pre-treatment of chitin disrupts the structure of the biomass, rendering the polymer more accessible for enzymatic hydrolysis. The commercial chitinases from Bacillus cereus and Streptomyces griseus (CHB and CHS) are costly. Bio-prospecting for other chitin-degrading enzymes from alternate sources such as Oidiodendron maius, or the recombinant expression of CHOS, was a more economically feasible avenue. The chit1 gene from Thermomyces lanuginosus, expressed in Pichia pastoris, produced a large range CHOS with a degree of polymerisation (DP) ranging from 1 to above 6. TLC analysis showed that O. maius exhibited chitin-degrading properties by producing CHOS with a DP length of 1 to 3. These two sources were therefore successful in producing chitin-degrading enzymes. The physico-chemical properties of commercial (CHB and CHS) and expressed (Chit1) chitinolytic enzymes were investigated, to determine under which biochemical conditions and on which type of biomass they can function on optimally, for the production of value-added products such as CHOS. Substrate affinity assays were conducted on the un-treated and pre-treated biomass. TLC revealed that chitosan hydrolysis by the commercial chitinases produced the largest range of CHOS with a DP length ranging from 1 to 6. A range of temperatures (35-90oC) were investigated and CHB, CHS and Chit1 displayed optimum activities at 50, 40 and 45 oC, respectively. Thermostability studies that were conducted at 37 and 50oC revealed that CHB and CHS were most stable at 37oC. Chit1 showed great thermostablity at both temperatures, rendering this enzyme suitable for industrial processes at high temperatures. pH optima studies demonstrated that the pH optima for CHB, CHS and Chit1 was at a pH of 5.0, with specific activities of 33.459, 46.2 and 5.776 μmol/h/mg, respectively. The chain cleaving patterns of the commercial enzymes were determined and exo-chitinase activity was exhibited, due to the production of CHOS that were predominantly of a DP length of 2. Enzyme binary synergy studies were conducted with commercial chitinases (CHB and CHS) on colloidal chitin. Studies illustrated that the simultaneous combination of CHB 75%: CHS 25% produced the highest specific activity (3.526 μmol/h/mg), with no synergy. TLC analysis of this enzyme combination over time revealed that predominantly chitobiose was produced. This suggested that the substrate crystallinity and morphology played an important role in the way the enzymes cleaved the carbohydrate. Since CHOS have shown great promise for their antimicrobial properties, the CHOS generated from the chitinous substrates were tested for antimicrobial properties on Bacillus subtilis, Escherichia coli, Klebsiella and Staphlococcus aureus. This study revealed that certain CHOS produced have inhibitory effects on certain bacteria and could potentially be used in the pharamceutical or medical industries. In conclusion, this study revealed that chitinases can be produced and found in alternate sources and be used for the hydrolysis of chitinous biomass in a more sustainabe and economically viable manner. The chitinases investigated (CHB, CHS and Chit1) exhibited different cleaving patterns of the chitinous substrates due to the chemical and morphological properties of the biomass. CHOS produced from chitinous biomass exhibited some inhibitory effects on bacterial growth and show potential for use in the medical industry.
- Full Text:
- Authors: Oree, Glynis
- Date: 2019
- Subjects: Chitin -- Biotechnology , Enzymes -- Biotechnology , Hydrolysis , Chitooligomers -- Biotechnology
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/67887 , vital:29165
- Description: There are many diseases and illnesses in the world that require new drug treatments and chitin has been shown to produce chitooligomeric derivatives which exhibit promising antimicrobial and immune-enhancing properties. However, the rate-limiting step is associated with the high recalcitrance of chitinous substrates, and low hydrolytic activities of chitinolytic enzymes, resulting in low product release. To improve and create a more sustainable and economical process, enhancing chitin hydrolysis through various treatment procedures is essential for obtaining high enzyme hydrolysis rates, resulting in a higher yield of chitooligomers (CHOS). In literature, pre-treatment of insoluble biomass is generally associated with an increase in accessibility of the carbohydrate to hydrolytic enzymes, thus generating more products. The first part of this study investigated the effect of alkali- (NaOH) and acid pre-treatments (HCl and phosphoric acid) on chitin biomass, and chemical and morphological modifications were assessed by the employment of scanning electron microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), Energy-Dispersive X-ray spectrometery (EDX) and x-ray diffraction (XRD). Data obtained confirmed that pre-treated substrates were more chemically and morphologically modified. These results confirmed the fact that pre-treatment of chitin disrupts the structure of the biomass, rendering the polymer more accessible for enzymatic hydrolysis. The commercial chitinases from Bacillus cereus and Streptomyces griseus (CHB and CHS) are costly. Bio-prospecting for other chitin-degrading enzymes from alternate sources such as Oidiodendron maius, or the recombinant expression of CHOS, was a more economically feasible avenue. The chit1 gene from Thermomyces lanuginosus, expressed in Pichia pastoris, produced a large range CHOS with a degree of polymerisation (DP) ranging from 1 to above 6. TLC analysis showed that O. maius exhibited chitin-degrading properties by producing CHOS with a DP length of 1 to 3. These two sources were therefore successful in producing chitin-degrading enzymes. The physico-chemical properties of commercial (CHB and CHS) and expressed (Chit1) chitinolytic enzymes were investigated, to determine under which biochemical conditions and on which type of biomass they can function on optimally, for the production of value-added products such as CHOS. Substrate affinity assays were conducted on the un-treated and pre-treated biomass. TLC revealed that chitosan hydrolysis by the commercial chitinases produced the largest range of CHOS with a DP length ranging from 1 to 6. A range of temperatures (35-90oC) were investigated and CHB, CHS and Chit1 displayed optimum activities at 50, 40 and 45 oC, respectively. Thermostability studies that were conducted at 37 and 50oC revealed that CHB and CHS were most stable at 37oC. Chit1 showed great thermostablity at both temperatures, rendering this enzyme suitable for industrial processes at high temperatures. pH optima studies demonstrated that the pH optima for CHB, CHS and Chit1 was at a pH of 5.0, with specific activities of 33.459, 46.2 and 5.776 μmol/h/mg, respectively. The chain cleaving patterns of the commercial enzymes were determined and exo-chitinase activity was exhibited, due to the production of CHOS that were predominantly of a DP length of 2. Enzyme binary synergy studies were conducted with commercial chitinases (CHB and CHS) on colloidal chitin. Studies illustrated that the simultaneous combination of CHB 75%: CHS 25% produced the highest specific activity (3.526 μmol/h/mg), with no synergy. TLC analysis of this enzyme combination over time revealed that predominantly chitobiose was produced. This suggested that the substrate crystallinity and morphology played an important role in the way the enzymes cleaved the carbohydrate. Since CHOS have shown great promise for their antimicrobial properties, the CHOS generated from the chitinous substrates were tested for antimicrobial properties on Bacillus subtilis, Escherichia coli, Klebsiella and Staphlococcus aureus. This study revealed that certain CHOS produced have inhibitory effects on certain bacteria and could potentially be used in the pharamceutical or medical industries. In conclusion, this study revealed that chitinases can be produced and found in alternate sources and be used for the hydrolysis of chitinous biomass in a more sustainabe and economically viable manner. The chitinases investigated (CHB, CHS and Chit1) exhibited different cleaving patterns of the chitinous substrates due to the chemical and morphological properties of the biomass. CHOS produced from chitinous biomass exhibited some inhibitory effects on bacterial growth and show potential for use in the medical industry.
- Full Text:
Bio-prospecting a Soil Metagenomic Library for Carbohydrate Active Esterases
- Authors: Shezi, Ntombifuthi
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4172 , http://hdl.handle.net/10962/d1021266
- Description: Lignocellulosic biomass is a promising renewable resource on earth. Plant biomass contains fermentable sugars and other moieties that can be converted to biofuels or other chemicals. Enzymatic hydrolysis of these biopolymers is significant in the liberation of sugars for fermentation into desired products. Owing to its complex structure, synergistic action of enzymes is required for its degradation. Enzymes that are involved in biomass degradation include cellulases, hemicellulases and the accessory enzymes acetyl xylan esterases and ferulic acid esterases. Ferulic acid esterases (FAEs, EC 3.1.1.73), represent a subclass of carboxylester hydrolases (EC 3.1.1.-) that catalyse the release of hydroxycinnamic acids (such as ferulic acid, p-coumaric, ferulic, sinapic and caffeic acid) that are generally found esterified to polysaccharides, such as arabinoxylans. Hydroxycinnamic acids have widespread potential applications due to their antimicrobial, photoprotectant and antioxidant properties, as well as their use as flavour precursors. Therefore, this interesting group of FAEs has a potentially wide variety of applications in agriculture, food and pharmaceutical industries. In the search for novel biocatalysts, metagenomics is considered as an alternative approach to conventional microbe screening, therefore, searching for novel biocatalysts from a soil metagenome that harbours a unique diversity of biocatalyst is significant. The aim of this study was to extract DNA from soil associated with cattle manure and construct a soil metagenomic library using a fosmid based plasmid vector and subsequently functionally screen for ferulic acid esterases using ethyl ferulate as a model substrate. A total of 59 recombinant fosmids conferring ferulic acid esterase phenotypes were identified (Hit rate 1:3122) and the two fosmids that consistently showed high FAE activities were selected for further study. Following nucleotide sequencing and translational analysis, two fae encoding open reading frames (FAE9 and FAE27) of approximately 274 and 322 aa, respectively, were identified. The amino acid sequence of the two ORFs contained a classical conserved esterase/lipase G-x-S-x-G sequence motif. The two genes (fae9 and fae27) were successfully expressed in Escherichia coli BL21 (DE3) and the purified enzymes exhibited respective temperature optima of 50 °C and 40 °C, and respective pH optima of 6.0 and 7.0. Further biochemical characterisation showed that FAE9 and FAE27 have high substrate specificity, following the fact that EFA is the preferred substrate for FAE9 (kcat/Km value of 128 s−1.mM-1) and also the preferred substrate for FAE27 (kcat/Km value of 137 s−1.mM-1). This work proves that soil is a valuable environmental source for novel esterase screening through functional based metagenomic approach. Therefore, this method may be used to screen for other valuable enzymes from environmental sources using inexpensive natural sources to encourage the screening of specific enzymes. Biochemistry of the two isolated enzymes makes these enzymes to be useful in industrial applications due to broad substrate activity that could replace the specialised enzymes to complete plant biomass degradation.
- Full Text:
- Authors: Shezi, Ntombifuthi
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4172 , http://hdl.handle.net/10962/d1021266
- Description: Lignocellulosic biomass is a promising renewable resource on earth. Plant biomass contains fermentable sugars and other moieties that can be converted to biofuels or other chemicals. Enzymatic hydrolysis of these biopolymers is significant in the liberation of sugars for fermentation into desired products. Owing to its complex structure, synergistic action of enzymes is required for its degradation. Enzymes that are involved in biomass degradation include cellulases, hemicellulases and the accessory enzymes acetyl xylan esterases and ferulic acid esterases. Ferulic acid esterases (FAEs, EC 3.1.1.73), represent a subclass of carboxylester hydrolases (EC 3.1.1.-) that catalyse the release of hydroxycinnamic acids (such as ferulic acid, p-coumaric, ferulic, sinapic and caffeic acid) that are generally found esterified to polysaccharides, such as arabinoxylans. Hydroxycinnamic acids have widespread potential applications due to their antimicrobial, photoprotectant and antioxidant properties, as well as their use as flavour precursors. Therefore, this interesting group of FAEs has a potentially wide variety of applications in agriculture, food and pharmaceutical industries. In the search for novel biocatalysts, metagenomics is considered as an alternative approach to conventional microbe screening, therefore, searching for novel biocatalysts from a soil metagenome that harbours a unique diversity of biocatalyst is significant. The aim of this study was to extract DNA from soil associated with cattle manure and construct a soil metagenomic library using a fosmid based plasmid vector and subsequently functionally screen for ferulic acid esterases using ethyl ferulate as a model substrate. A total of 59 recombinant fosmids conferring ferulic acid esterase phenotypes were identified (Hit rate 1:3122) and the two fosmids that consistently showed high FAE activities were selected for further study. Following nucleotide sequencing and translational analysis, two fae encoding open reading frames (FAE9 and FAE27) of approximately 274 and 322 aa, respectively, were identified. The amino acid sequence of the two ORFs contained a classical conserved esterase/lipase G-x-S-x-G sequence motif. The two genes (fae9 and fae27) were successfully expressed in Escherichia coli BL21 (DE3) and the purified enzymes exhibited respective temperature optima of 50 °C and 40 °C, and respective pH optima of 6.0 and 7.0. Further biochemical characterisation showed that FAE9 and FAE27 have high substrate specificity, following the fact that EFA is the preferred substrate for FAE9 (kcat/Km value of 128 s−1.mM-1) and also the preferred substrate for FAE27 (kcat/Km value of 137 s−1.mM-1). This work proves that soil is a valuable environmental source for novel esterase screening through functional based metagenomic approach. Therefore, this method may be used to screen for other valuable enzymes from environmental sources using inexpensive natural sources to encourage the screening of specific enzymes. Biochemistry of the two isolated enzymes makes these enzymes to be useful in industrial applications due to broad substrate activity that could replace the specialised enzymes to complete plant biomass degradation.
- Full Text:
An investigation into the synergistic action of cellulose-degrading enzymes on complex substrates
- Authors: Thoresen, Mariska
- Date: 2015
- Subjects: Lignocellulose , Biomass energy , Cellulosic ethanol , Saccharomyces cerevisiae , Cellulase , Enzymes -- Biotechnology , Hydrolases
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4154 , http://hdl.handle.net/10962/d1017915
- Full Text:
- Authors: Thoresen, Mariska
- Date: 2015
- Subjects: Lignocellulose , Biomass energy , Cellulosic ethanol , Saccharomyces cerevisiae , Cellulase , Enzymes -- Biotechnology , Hydrolases
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4154 , http://hdl.handle.net/10962/d1017915
- Full Text:
Nanofiber immobilized cellulases and hemicellulases for fruit waste beneficiation
- Authors: Swart, Shanna
- Date: 2015
- Subjects: Agricultural wastes , Cellulase , Hemicellulose , Nanofibers , Electrospinning , Lignocellulose -- Biodegradation , Biomass conversion , Polysaccharides , Immobilized enzymes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4153 , http://hdl.handle.net/10962/d1017914
- Full Text:
- Authors: Swart, Shanna
- Date: 2015
- Subjects: Agricultural wastes , Cellulase , Hemicellulose , Nanofibers , Electrospinning , Lignocellulose -- Biodegradation , Biomass conversion , Polysaccharides , Immobilized enzymes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4153 , http://hdl.handle.net/10962/d1017914
- Full Text:
The effect of GH family affiliations of mannanolytic enzymes on their synergistic associations during the hydrolysis of mannan-containing substrates
- Authors: Malgas, Samkelo
- Date: 2015
- Subjects: Lignocellulose , Biomass energy , Ethanol as fuel , Polysaccharides , Sugar -- Inversion , Glycosidases , Galactoglucomannans , Oligosaccharides
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4148 , http://hdl.handle.net/10962/d1017909
- Full Text:
- Authors: Malgas, Samkelo
- Date: 2015
- Subjects: Lignocellulose , Biomass energy , Ethanol as fuel , Polysaccharides , Sugar -- Inversion , Glycosidases , Galactoglucomannans , Oligosaccharides
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4148 , http://hdl.handle.net/10962/d1017909
- Full Text:
The large scale bioinformatics analysis of auxiliary activity family 9 enzymes
- Authors: Moses, Vuyani
- Date: 2014
- Subjects: Bioinformatics -- Analysis , Cellulose -- Biodegradation , Biomass energy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4145 , http://hdl.handle.net/10962/d1016356
- Description: Biofuels have been proposed to be a suitable replacement to the already depleting fossil fuels. The complex structures of plant biomasses present a challenge the production of biofuels due to recalcitrance. The complex cellulose structure and hydrogen bonding between repeat units of cellulose is believed to be a major contributor to the recalcitrance of cellulose. Fungal organisms come equipped with various oxidative enzymes involved in degradation of plant biomass. The exact mechanism of cellulose degradation remains elusive. The GH61 is a group of proteins which are PMOs. GH61 sequences where previously described as endoglucanases due to weak endoglucanase activity. These enzymes were later found not possess any enzyme activity of their own however they could enhance the activity of other cellulose degrading enzymes. As a result reclassification of these enzymes as AA9 has been implemented. AA9 proteins have been reported to share structural homology with the bacterial AA10 group of enzymes. Based on cleavage products that are produced when AA9 proteins interact with cellulose, AA9 proteins have been grouped into three types. To date the exact mechanism and the sequence and structural basis for differentiating between the various AA9 types remains unknown. Using various bionformatic techniques sequence and structural elements were identified for distinguishing between the AA9 types. A large dataset of sequences was obtained from the Pfam database from UNIPROT entries. Due to high divergence of AA9 sequences, a smaller dataset with the more divergent sequences removed was created. The inclusion of the reference sequences to the data set was done to observe which sequences belong to a certain type. Phylogenetic analysis was able to group AA9 proteins into three distinct groups. MSA and motif analysis revealed that the N-Terminus of these proteins is mostly responsible for type specificity. Structural analysis of AA9 PDB structures and homology models allowed the effect of physicochemical properties to be gauged structurally. The presence of 310 helices and aromatic residues the surface of AA9 sequences is an observation which still warrants further investigation.
- Full Text:
- Authors: Moses, Vuyani
- Date: 2014
- Subjects: Bioinformatics -- Analysis , Cellulose -- Biodegradation , Biomass energy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4145 , http://hdl.handle.net/10962/d1016356
- Description: Biofuels have been proposed to be a suitable replacement to the already depleting fossil fuels. The complex structures of plant biomasses present a challenge the production of biofuels due to recalcitrance. The complex cellulose structure and hydrogen bonding between repeat units of cellulose is believed to be a major contributor to the recalcitrance of cellulose. Fungal organisms come equipped with various oxidative enzymes involved in degradation of plant biomass. The exact mechanism of cellulose degradation remains elusive. The GH61 is a group of proteins which are PMOs. GH61 sequences where previously described as endoglucanases due to weak endoglucanase activity. These enzymes were later found not possess any enzyme activity of their own however they could enhance the activity of other cellulose degrading enzymes. As a result reclassification of these enzymes as AA9 has been implemented. AA9 proteins have been reported to share structural homology with the bacterial AA10 group of enzymes. Based on cleavage products that are produced when AA9 proteins interact with cellulose, AA9 proteins have been grouped into three types. To date the exact mechanism and the sequence and structural basis for differentiating between the various AA9 types remains unknown. Using various bionformatic techniques sequence and structural elements were identified for distinguishing between the AA9 types. A large dataset of sequences was obtained from the Pfam database from UNIPROT entries. Due to high divergence of AA9 sequences, a smaller dataset with the more divergent sequences removed was created. The inclusion of the reference sequences to the data set was done to observe which sequences belong to a certain type. Phylogenetic analysis was able to group AA9 proteins into three distinct groups. MSA and motif analysis revealed that the N-Terminus of these proteins is mostly responsible for type specificity. Structural analysis of AA9 PDB structures and homology models allowed the effect of physicochemical properties to be gauged structurally. The presence of 310 helices and aromatic residues the surface of AA9 sequences is an observation which still warrants further investigation.
- Full Text:
The effect of sewage effluent from De Beers marine diamond mining operations on the expression of cytochrome P450 (CYP1A) and vitellogenin (vtg)
- Authors: De Almeida, Louise
- Date: 2013-09-20
- Subjects: De Beers Consolidated Mines , Sewage disposal in rivers, lakes, etc. -- Namibia , Endocrine disrupting chemicals in water -- Namibia , Merluccius capensis -- Namibia , Merluccius -- Namibia , Water -- Pollution -- Namibia
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4096 , http://hdl.handle.net/10962/d1009440 , De Beers Consolidated Mines , Sewage disposal in rivers, lakes, etc. -- Namibia , Endocrine disrupting chemicals in water -- Namibia , Merluccius capensis -- Namibia , Merluccius -- Namibia , Water -- Pollution -- Namibia
- Description: Sewage effluents disposed into the marine environment from De Beers Marine Namibia diamond mining vessels have the potential to cause endocrine disruptive effects in marine organisms. Endocrine disruption refers to the alteration of the normal functioning of the endocrine system and various chemicals have the ability to mimic hormones, effecting endogenous hormone synthesis, transport, receptor interaction and intracellular signaling. The potential endocrine disruptive effects, caused by the release of different types of sewage effluents into the ocean, on fish species is a concern due to the commercial importance of fish species found in the mining area e.g. hake, sole, horse mackerel. Increased awareness of marine environmental degradation due to the presence of chemical contaminants has resulted in research being done on early warning systems, in the form of biomarkers. Cytochrome P450 monooxygenase 1A (CYP1A) and vitellogenin (vtg) are important proteins found in fish liver and blood, that have been used as biomarkers for the detection of pollutants in fish. CYP1A is a subfamily of the P450 superfamily of enzymes and catalyzes the oxidation, hydrolysis and reduction of exogenous and endogenous compounds (phase I reactions) and thus has the capacity to regulate the metabolism of several organic contaminants. CYP1A expression is altered by exposure to planar xenobiotic compounds e.g. polyaromatic hydrocarbons. Vtg is an important precursor for egg yolk proteins and plays a role in the growth and development of an oocyte. Expression of this protein is altered upon exposure to estrogenic compounds. The aim of this project was to isolate CYP1A from fish liver by differential centrifugation and optimize conditions for the CYP1A-mediated ethoxyresorufin-Odeethylase (EROD) assay and western blot analysis (to assess CYP1A expression). Another aim of this study was to evaluate the potential effects of biologically disruptive chemicals from sewage effluents, discharged into the marine environment, on the expression of CYP1A in two species of hake, Merluccius capensis and M. paradoxus (Cape hake). CYP1A in Cape hake is approximately a 60 kDa protein and the highest EROD activity was detected in the microsomal fraction after differential centrifugation. Optimal EROD assay conditions were observed at pH 7.5, a temperature of 25 °C, 10 μl of sample and a reaction time of 30 seconds. Enzyme stability assays indicated a drastic decrease in enzyme activity after 30 seconds. The EROD assay was not NADPH dependent but was limited by NADPH supply, with an increase of 300% in EROD activity being observed with the addition of 0.1 M exogenous NADPH. The addition of dicumarol (40 μM), a phase II enzyme inhibitor, showed a 232% increase in EROD activity. This is because dicumarol inhibited enzymes with the capacity to metabolize the product (resorufin) of the EROD reaction. With regard to western blot analysis, the optimal primary (rabbit antifish CYP1A peptide) and secondary (anti-mouse/rabbit antibody-horseradish peroxidase conjugate (POD)) antibody dilutions were determined to be 1:1000 and 1:5000, respectively. The comparison of CYP1A expression in Cape hake samples from De Beers Marine mining area and reference sites showed higher EROD activity (16.29 ± 0.91 pmol/min) in fish samples from the mining area in comparison to the reference site (10.42 ± 2.65 pmol/min). Western blot analysis was in agreement with the EROD assay results and a higher CYP1A expression was observed in fish from the mining sites. The increased CYP1A expression observed in fish from the mining area is not definitively an indication of a pollutant effect in the environment, as several environmental and biological factors (e.g. photoperiod and age) must also be considered before reaching this conclusion. Another aim of this study was to purify vtg from Cape hake blood samples. Cape hake vtg was purified from fish plasma by selective precipitation with MgCl2 and EDTA. Precipitated sample was subjected to anion exchange chromatography using fast protein liquid chromatography (FPLC). Vtg eluted as two broad peaks and had a molecular weight above 200 kDa. SDS-PAGE analysis also resolved smaller molecular weight proteins below 70 kDa, which were thought to be vitellogenin cleavage proteins, lipovitellin and phosphovitins. Western blot analysis was performed; however, it did not produce any conclusive results. The purification of vtg enables further studies in characterizing this protein and developing assay aimed at detecting estrogenic pollutants in the marine environment
- Full Text:
- Authors: De Almeida, Louise
- Date: 2013-09-20
- Subjects: De Beers Consolidated Mines , Sewage disposal in rivers, lakes, etc. -- Namibia , Endocrine disrupting chemicals in water -- Namibia , Merluccius capensis -- Namibia , Merluccius -- Namibia , Water -- Pollution -- Namibia
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4096 , http://hdl.handle.net/10962/d1009440 , De Beers Consolidated Mines , Sewage disposal in rivers, lakes, etc. -- Namibia , Endocrine disrupting chemicals in water -- Namibia , Merluccius capensis -- Namibia , Merluccius -- Namibia , Water -- Pollution -- Namibia
- Description: Sewage effluents disposed into the marine environment from De Beers Marine Namibia diamond mining vessels have the potential to cause endocrine disruptive effects in marine organisms. Endocrine disruption refers to the alteration of the normal functioning of the endocrine system and various chemicals have the ability to mimic hormones, effecting endogenous hormone synthesis, transport, receptor interaction and intracellular signaling. The potential endocrine disruptive effects, caused by the release of different types of sewage effluents into the ocean, on fish species is a concern due to the commercial importance of fish species found in the mining area e.g. hake, sole, horse mackerel. Increased awareness of marine environmental degradation due to the presence of chemical contaminants has resulted in research being done on early warning systems, in the form of biomarkers. Cytochrome P450 monooxygenase 1A (CYP1A) and vitellogenin (vtg) are important proteins found in fish liver and blood, that have been used as biomarkers for the detection of pollutants in fish. CYP1A is a subfamily of the P450 superfamily of enzymes and catalyzes the oxidation, hydrolysis and reduction of exogenous and endogenous compounds (phase I reactions) and thus has the capacity to regulate the metabolism of several organic contaminants. CYP1A expression is altered by exposure to planar xenobiotic compounds e.g. polyaromatic hydrocarbons. Vtg is an important precursor for egg yolk proteins and plays a role in the growth and development of an oocyte. Expression of this protein is altered upon exposure to estrogenic compounds. The aim of this project was to isolate CYP1A from fish liver by differential centrifugation and optimize conditions for the CYP1A-mediated ethoxyresorufin-Odeethylase (EROD) assay and western blot analysis (to assess CYP1A expression). Another aim of this study was to evaluate the potential effects of biologically disruptive chemicals from sewage effluents, discharged into the marine environment, on the expression of CYP1A in two species of hake, Merluccius capensis and M. paradoxus (Cape hake). CYP1A in Cape hake is approximately a 60 kDa protein and the highest EROD activity was detected in the microsomal fraction after differential centrifugation. Optimal EROD assay conditions were observed at pH 7.5, a temperature of 25 °C, 10 μl of sample and a reaction time of 30 seconds. Enzyme stability assays indicated a drastic decrease in enzyme activity after 30 seconds. The EROD assay was not NADPH dependent but was limited by NADPH supply, with an increase of 300% in EROD activity being observed with the addition of 0.1 M exogenous NADPH. The addition of dicumarol (40 μM), a phase II enzyme inhibitor, showed a 232% increase in EROD activity. This is because dicumarol inhibited enzymes with the capacity to metabolize the product (resorufin) of the EROD reaction. With regard to western blot analysis, the optimal primary (rabbit antifish CYP1A peptide) and secondary (anti-mouse/rabbit antibody-horseradish peroxidase conjugate (POD)) antibody dilutions were determined to be 1:1000 and 1:5000, respectively. The comparison of CYP1A expression in Cape hake samples from De Beers Marine mining area and reference sites showed higher EROD activity (16.29 ± 0.91 pmol/min) in fish samples from the mining area in comparison to the reference site (10.42 ± 2.65 pmol/min). Western blot analysis was in agreement with the EROD assay results and a higher CYP1A expression was observed in fish from the mining sites. The increased CYP1A expression observed in fish from the mining area is not definitively an indication of a pollutant effect in the environment, as several environmental and biological factors (e.g. photoperiod and age) must also be considered before reaching this conclusion. Another aim of this study was to purify vtg from Cape hake blood samples. Cape hake vtg was purified from fish plasma by selective precipitation with MgCl2 and EDTA. Precipitated sample was subjected to anion exchange chromatography using fast protein liquid chromatography (FPLC). Vtg eluted as two broad peaks and had a molecular weight above 200 kDa. SDS-PAGE analysis also resolved smaller molecular weight proteins below 70 kDa, which were thought to be vitellogenin cleavage proteins, lipovitellin and phosphovitins. Western blot analysis was performed; however, it did not produce any conclusive results. The purification of vtg enables further studies in characterizing this protein and developing assay aimed at detecting estrogenic pollutants in the marine environment
- Full Text:
Immobilisation of electric eel acetylcholinesterase on nanofibres electrospun from a nylon and chitosan blend
- Authors: Mafuma, Tendai Simbarashe
- Date: 2013
- Subjects: Acetylcholinesterase Acetylcholinesterase -- Inhibitors Electric eel Biosensors Immobilized enzymes Pesticides -- Environmental aspects Pesticides -- Toxicology Nylon Chitosan Nanofibers Electrospinning
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3886 , http://hdl.handle.net/10962/d1001620
- Description: Organophosphates and carbamates are potent inhibitors of the neurotransmitter acetylcholinesterase. This inhibition results in the blocking of nerve signal transference into the post synaptic neuron leading to loss of muscle action and death. Because of the universal mechanisms of signal transduction in animals, these inhibitors have been widely used as agricultural pesticides as well as chemical warfare agents (nerve agents). Health issues associated with pesticide usage result from the fact that both the pesticides and their breakdown products often end up in water and food sources as well as in the soil. As a result, there has been an increase in the number of studies aimed at the detection of these pesticides in the environment. One popular research area is enzyme based biosensor construction. Some important criteria for consideration during the construction of biosensors are the importance of a suitable solid support as well as the enzyme immobilisation method. Recently, there has been increased interest in using nano-scale material e.g. using nanoparticles as enzyme support material. This is largely due to their advantages such as large surface area to volume ratio as well as reduced mass transfer resistance. Electrospinning is a straight forward and cost effective method for producing nanofibres from any soluble polymer(s). The applications of electrospun nanofibres have been reported in clinical studies, biofuel production as well as bioremediation. In this study two polymers were selected: nylon for its mechanical stability and chitosan for its biocompatibility and hydrophilicity, for the fabrication of electrospun nanofibres which would function as immobilisation support material for acetylcholinesterase. The first objective of this study was to electrospin nanofibres from a nylon-6 and chitosan blend solution. A binary solvent system consisting of formic acid and acetic acid (50:50) successfully dissolved and blended the polymers which were subsequently electrospun. Scanning electron microscopy characterisation of the nanofibres showed that (i) a nylon-6: chitosan ratio of 16%: 3% resulted in the formation of bead free nanofibres and (ii) the fibres were collected in non-woven mats characterised by different size nanofibres with average diameters of 250 nm for the main fibres and 40 nm for the smaller nanofibres. Fourier transform infra-red (FT-IR) analysis of the nanofibres indicated that a new product had been formed during the blending of the two polymers. The second aim of the study was to carry out a facile immobilisation of electric eel acetylcholinesterase via glutaraldehyde (GA) cross-linking. Glutaraldehyde solution 5% (v/v) resulted in the immobilisation of 0.334 mg/cm² of acetylcholinesterase onto the nanofibres. The immobilisation procedure was optimised with reference to acetylcholinestease and crosslinker concentrations, incubation time and the cross-linking method. A comparative investigation into the optimum pH and temperature conditions, pH and thermal stabilities, substrate and inhibition kinetics was then carried out on free and immobilised acetylcholinesterase. The final objective of this study was to determine the storage stabilities of the immobilised and free enzymes as well as the reusability characteristics of the immobilised acetylcholinesterase. Several conclusions were drawn from this study. Acetylcholinesterase was successfully immobilised onto the surface of nylon-6:chitosan nanofibres with retention of its activity. There was a shift in the pH optimum of the immobilised acetylcholineseterase by 0.5 units towards a neutral pH. Although both free and immobilised acetylcholinesterase exhibited the same optimum temperature, immobilised acetylcholinesterase showed enhanced thermal stability. In terms of pH stability, immobilised acetylcholinesterase showed greater stability at acidic pH whilst free acetylcholinesterase was more stable under alkaline pH conditions. Relative to free acetylcholinesterase, the immobilised enzyme showed considerable storage stability retaining ~50% of its activity when stored for 49 days at 4°C. Immobilised acetylcholinesterase also retained > 20% of its initial activity after 9 consecutive reuse cycles. When exposed to fixed concentrations of carbofuran or demeton-S-methyl sulfone, immobilised acetylcholinesterase showed similar inhibition characteristics to that of the free enzyme. The decrease in enzyme activity observed after immobilisation to the nanofibres may have been due to several reasons which include some enzyme molecules being immobilised in structural conformations which reduced substrate access to the catalytic site, participation of the catalytic residues in immobilisation and enzyme denaturation due to the reaction conditions used for acetylcholinesterase immobilisation. Similar observations have been widely reported in literature and this is one of the major drawbacks of enzyme immobilisation. In conclusion, nylon-6:chitosan electrospun nanofibres were shown to be suitable supports for facile acetylcholinesterase immobilisation and the immobilised enzyme has potential for use in pesticide detection. Future recommendations for this study include a comparative study of the GA cross-linking method for AChE immobilisation which will lead to more intensely bound enzyme molecules to prevent non-specific binding. An investigation into the effect of inhibitors on stored immobilised AChE, as well as reactivation and reuse studies, may also be useful for determining the cost-effectiveness of reusing immobilised AChE for pesticide detection in environmental water samples. Several models have been designed for the determination of the kinetic parameters for immobilised enzymes. These take into account the mass transfer resistance as well as the overall charge of the immobilisation matrix. The use of these models to analyse experimental data will give a clear understanding of the effects of immobilisation on enzyme activity
- Full Text:
- Authors: Mafuma, Tendai Simbarashe
- Date: 2013
- Subjects: Acetylcholinesterase Acetylcholinesterase -- Inhibitors Electric eel Biosensors Immobilized enzymes Pesticides -- Environmental aspects Pesticides -- Toxicology Nylon Chitosan Nanofibers Electrospinning
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3886 , http://hdl.handle.net/10962/d1001620
- Description: Organophosphates and carbamates are potent inhibitors of the neurotransmitter acetylcholinesterase. This inhibition results in the blocking of nerve signal transference into the post synaptic neuron leading to loss of muscle action and death. Because of the universal mechanisms of signal transduction in animals, these inhibitors have been widely used as agricultural pesticides as well as chemical warfare agents (nerve agents). Health issues associated with pesticide usage result from the fact that both the pesticides and their breakdown products often end up in water and food sources as well as in the soil. As a result, there has been an increase in the number of studies aimed at the detection of these pesticides in the environment. One popular research area is enzyme based biosensor construction. Some important criteria for consideration during the construction of biosensors are the importance of a suitable solid support as well as the enzyme immobilisation method. Recently, there has been increased interest in using nano-scale material e.g. using nanoparticles as enzyme support material. This is largely due to their advantages such as large surface area to volume ratio as well as reduced mass transfer resistance. Electrospinning is a straight forward and cost effective method for producing nanofibres from any soluble polymer(s). The applications of electrospun nanofibres have been reported in clinical studies, biofuel production as well as bioremediation. In this study two polymers were selected: nylon for its mechanical stability and chitosan for its biocompatibility and hydrophilicity, for the fabrication of electrospun nanofibres which would function as immobilisation support material for acetylcholinesterase. The first objective of this study was to electrospin nanofibres from a nylon-6 and chitosan blend solution. A binary solvent system consisting of formic acid and acetic acid (50:50) successfully dissolved and blended the polymers which were subsequently electrospun. Scanning electron microscopy characterisation of the nanofibres showed that (i) a nylon-6: chitosan ratio of 16%: 3% resulted in the formation of bead free nanofibres and (ii) the fibres were collected in non-woven mats characterised by different size nanofibres with average diameters of 250 nm for the main fibres and 40 nm for the smaller nanofibres. Fourier transform infra-red (FT-IR) analysis of the nanofibres indicated that a new product had been formed during the blending of the two polymers. The second aim of the study was to carry out a facile immobilisation of electric eel acetylcholinesterase via glutaraldehyde (GA) cross-linking. Glutaraldehyde solution 5% (v/v) resulted in the immobilisation of 0.334 mg/cm² of acetylcholinesterase onto the nanofibres. The immobilisation procedure was optimised with reference to acetylcholinestease and crosslinker concentrations, incubation time and the cross-linking method. A comparative investigation into the optimum pH and temperature conditions, pH and thermal stabilities, substrate and inhibition kinetics was then carried out on free and immobilised acetylcholinesterase. The final objective of this study was to determine the storage stabilities of the immobilised and free enzymes as well as the reusability characteristics of the immobilised acetylcholinesterase. Several conclusions were drawn from this study. Acetylcholinesterase was successfully immobilised onto the surface of nylon-6:chitosan nanofibres with retention of its activity. There was a shift in the pH optimum of the immobilised acetylcholineseterase by 0.5 units towards a neutral pH. Although both free and immobilised acetylcholinesterase exhibited the same optimum temperature, immobilised acetylcholinesterase showed enhanced thermal stability. In terms of pH stability, immobilised acetylcholinesterase showed greater stability at acidic pH whilst free acetylcholinesterase was more stable under alkaline pH conditions. Relative to free acetylcholinesterase, the immobilised enzyme showed considerable storage stability retaining ~50% of its activity when stored for 49 days at 4°C. Immobilised acetylcholinesterase also retained > 20% of its initial activity after 9 consecutive reuse cycles. When exposed to fixed concentrations of carbofuran or demeton-S-methyl sulfone, immobilised acetylcholinesterase showed similar inhibition characteristics to that of the free enzyme. The decrease in enzyme activity observed after immobilisation to the nanofibres may have been due to several reasons which include some enzyme molecules being immobilised in structural conformations which reduced substrate access to the catalytic site, participation of the catalytic residues in immobilisation and enzyme denaturation due to the reaction conditions used for acetylcholinesterase immobilisation. Similar observations have been widely reported in literature and this is one of the major drawbacks of enzyme immobilisation. In conclusion, nylon-6:chitosan electrospun nanofibres were shown to be suitable supports for facile acetylcholinesterase immobilisation and the immobilised enzyme has potential for use in pesticide detection. Future recommendations for this study include a comparative study of the GA cross-linking method for AChE immobilisation which will lead to more intensely bound enzyme molecules to prevent non-specific binding. An investigation into the effect of inhibitors on stored immobilised AChE, as well as reactivation and reuse studies, may also be useful for determining the cost-effectiveness of reusing immobilised AChE for pesticide detection in environmental water samples. Several models have been designed for the determination of the kinetic parameters for immobilised enzymes. These take into account the mass transfer resistance as well as the overall charge of the immobilisation matrix. The use of these models to analyse experimental data will give a clear understanding of the effects of immobilisation on enzyme activity
- Full Text:
- «
- ‹
- 1
- ›
- »