A geological, petrological and mineralogical study of the UG3 chromitite seam at Modikwa Platinum Mine : significance to exploration and PGE resources
- Authors: Machumele, Nkateko Jones
- Date: 2014
- Subjects: Modikwa Platinum Mine (South Africa) , Chromite -- South Africa -- Limpopo , Geology -- South Africa -- Limpopo , Petrology -- South Africa -- Limpopo , Mineralogy -- South Africa -- Limpopo , Platinum mines and mining -- South Africa -- Limpopo
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5074 , http://hdl.handle.net/10962/d1013553
- Description: The UG3 at Modikwa Platinum Mine occurs as a platiniferous, planar chromitite seam. It is stratigraphically located in the Upper Critical Zone of the Eastern Bushveld Complex. Field work study comprise of underground mapping, sampling, surface mapping, borehole core logging, microprobing and microscopic investigations carried out at the Rhodes University. The UG3 at the Modikwa Platinum Mine is about 22cm thick chromitite seam underlain by a white fine grained anorthosite and overlain by a brown medium grained feldspathic pyroxenite. It is an incomplete cyclic unit consisting of chromite and feldspathic pyroxenite. The UG3 reef at the Modikwa Platinum Mine lease area represents a Platinum Group Metal resource of 300 million tons of ore at an in situ grade of 2.5g/t. Under the current market conditions the UG3 reef remains unprofitable to mine in an underground operation due to the operational cost involved. However, it has been illustrated that the UG3 chromitite seam can increase profit margins in an open pit operation provided it is mined together with the economic UG2 chromitite seam. The extraction of the UG3 as ore in the four Modikwa UG2 open pits would result in a combined operating cash profit of R330 million. The UG3 chromitite seam is platiniferous. The platinum-group minerals (PGM) range in size from less than 10μm to about 70μm. The PGMs are associated with sulphides and are both located in the interstitial silicates and are concentrated in the chromitite seam. The PGMs show a strong preference to contact boundaries of the silicate grains, the chromite grains and the sulphide phases. In some instances, they are enclosed within the chromite grains in association with sulphides. The general sulphide assemblage comprises pentlandite and chalcopyrite whereas, the PGMs assemblage comprises cooperite, ferroplatinum, laurite, FeRhS and PtRhS.
- Full Text:
- Date Issued: 2014
- Authors: Machumele, Nkateko Jones
- Date: 2014
- Subjects: Modikwa Platinum Mine (South Africa) , Chromite -- South Africa -- Limpopo , Geology -- South Africa -- Limpopo , Petrology -- South Africa -- Limpopo , Mineralogy -- South Africa -- Limpopo , Platinum mines and mining -- South Africa -- Limpopo
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5074 , http://hdl.handle.net/10962/d1013553
- Description: The UG3 at Modikwa Platinum Mine occurs as a platiniferous, planar chromitite seam. It is stratigraphically located in the Upper Critical Zone of the Eastern Bushveld Complex. Field work study comprise of underground mapping, sampling, surface mapping, borehole core logging, microprobing and microscopic investigations carried out at the Rhodes University. The UG3 at the Modikwa Platinum Mine is about 22cm thick chromitite seam underlain by a white fine grained anorthosite and overlain by a brown medium grained feldspathic pyroxenite. It is an incomplete cyclic unit consisting of chromite and feldspathic pyroxenite. The UG3 reef at the Modikwa Platinum Mine lease area represents a Platinum Group Metal resource of 300 million tons of ore at an in situ grade of 2.5g/t. Under the current market conditions the UG3 reef remains unprofitable to mine in an underground operation due to the operational cost involved. However, it has been illustrated that the UG3 chromitite seam can increase profit margins in an open pit operation provided it is mined together with the economic UG2 chromitite seam. The extraction of the UG3 as ore in the four Modikwa UG2 open pits would result in a combined operating cash profit of R330 million. The UG3 chromitite seam is platiniferous. The platinum-group minerals (PGM) range in size from less than 10μm to about 70μm. The PGMs are associated with sulphides and are both located in the interstitial silicates and are concentrated in the chromitite seam. The PGMs show a strong preference to contact boundaries of the silicate grains, the chromite grains and the sulphide phases. In some instances, they are enclosed within the chromite grains in association with sulphides. The general sulphide assemblage comprises pentlandite and chalcopyrite whereas, the PGMs assemblage comprises cooperite, ferroplatinum, laurite, FeRhS and PtRhS.
- Full Text:
- Date Issued: 2014
A review of archean orogenic gold deposits in greenstone belts and the Slave Province : exploration in the Yellowknife domain, NWT, Canada
- Authors: Branson, Thomas Keegan
- Date: 2014
- Subjects: Gold ores -- Northwest Territories -- Yellowknife , Gold ores -- Geology , Gold mines and mining -- Northwest Territories -- Yellowknife , Greenstone belts -- Northwest Territories -- Yellowknife , Orogenic belts -- Northwest Territories -- Yellowknife , Prospecting -- Northwest Territories -- Yellowknife , Mining geology , Slave Province (N.W.T. and Nunavut)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5055 , http://hdl.handle.net/10962/d1012142 , Gold ores -- Northwest Territories -- Yellowknife , Gold ores -- Geology , Gold mines and mining -- Northwest Territories -- Yellowknife , Greenstone belts -- Northwest Territories -- Yellowknife , Orogenic belts -- Northwest Territories -- Yellowknife , Prospecting -- Northwest Territories -- Yellowknife , Mining geology , Slave Province (N.W.T. and Nunavut)
- Description: A review of Archean granite-greenstone terranes, orogenic gold deposits, the Slave Province and modern exploration tools, techniques and methods was conducted to identify prospective areas in the Yellowknife domain for hosting orogenic gold deposits and illustrate the best exploration methods for delineating this deposit type. This study identifies Archean granite-greenstone terranes as economically important hosts to quartz-carbonate vein-hosted orogenic gold deposits. These deposits occur at convergent plate margins, but can also be related to local extensional tectonics within a convergent setting. Heat generated from tectonic processes can trigger hydrothermal fluid movement along first-order faults and shear zones. Precipitation of gold-bearing quartz-carbonate veins from the hydrothermal fluids occurs in second- and third-order faults and shear zones related to the first-order structures. This study also identifies the Archean Slave Province in northern Canada as a well-endowed craton with numerous orogenic gold deposits, diamondiferous kimberlites, VMS deposits and several other mineralization styles. In particular, three greenstone belts (Yellowknife, Cameron River and Beaulieu River) associated with likely first-order structures are comprised of prospective rocks for hosting orogenic gold and VMS mineralization. The Yellowknife greenstone belt hosts the past-producing and former world-class Con and Giant orogenic gold deposits, but has been little explored with modern exploration techniques. The Cameron River and Beaulieu River greenstone belts host numerous base and precious metal VMS and BIF-hosted orogenic gold prospects and deposits, indicating mineralization is present. There is considerable potential for significant discoveries to be made using modern exploration techniques in the greenstone belts; however, exploration in the region has been hindered over the past decade by ongoing political negotiations. Once the political negotiations are finalized, application of modern exploration methods and techniques in the prospective greenstone belts should be carried out. Regional scale methodologies should be applied to generate targets using predictive modelling, implicit 3D modelling, 3D geochemistry and exploration targeting so decisions defining a businesses strategy for ground acquisition of high priority targets are made using quantitative analysis. Once ground is acquired, field-based exploration for orogenic gold and VMS deposits should include geological mapping with a focus on structural geology, geochemical sampling and airborne magnetic, radiometric and EM geophysical surveys. Prior to reconnaissance drilling, integration of all data layers and interpretation within a common 3D earth model should be conducted. Following successful reconnaissance drilling, definition drilling along strike and down dip of intersected mineralization, combined with borehole geophysics, should be carried out to delineate the extent of mineralization.
- Full Text:
- Date Issued: 2014
- Authors: Branson, Thomas Keegan
- Date: 2014
- Subjects: Gold ores -- Northwest Territories -- Yellowknife , Gold ores -- Geology , Gold mines and mining -- Northwest Territories -- Yellowknife , Greenstone belts -- Northwest Territories -- Yellowknife , Orogenic belts -- Northwest Territories -- Yellowknife , Prospecting -- Northwest Territories -- Yellowknife , Mining geology , Slave Province (N.W.T. and Nunavut)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5055 , http://hdl.handle.net/10962/d1012142 , Gold ores -- Northwest Territories -- Yellowknife , Gold ores -- Geology , Gold mines and mining -- Northwest Territories -- Yellowknife , Greenstone belts -- Northwest Territories -- Yellowknife , Orogenic belts -- Northwest Territories -- Yellowknife , Prospecting -- Northwest Territories -- Yellowknife , Mining geology , Slave Province (N.W.T. and Nunavut)
- Description: A review of Archean granite-greenstone terranes, orogenic gold deposits, the Slave Province and modern exploration tools, techniques and methods was conducted to identify prospective areas in the Yellowknife domain for hosting orogenic gold deposits and illustrate the best exploration methods for delineating this deposit type. This study identifies Archean granite-greenstone terranes as economically important hosts to quartz-carbonate vein-hosted orogenic gold deposits. These deposits occur at convergent plate margins, but can also be related to local extensional tectonics within a convergent setting. Heat generated from tectonic processes can trigger hydrothermal fluid movement along first-order faults and shear zones. Precipitation of gold-bearing quartz-carbonate veins from the hydrothermal fluids occurs in second- and third-order faults and shear zones related to the first-order structures. This study also identifies the Archean Slave Province in northern Canada as a well-endowed craton with numerous orogenic gold deposits, diamondiferous kimberlites, VMS deposits and several other mineralization styles. In particular, three greenstone belts (Yellowknife, Cameron River and Beaulieu River) associated with likely first-order structures are comprised of prospective rocks for hosting orogenic gold and VMS mineralization. The Yellowknife greenstone belt hosts the past-producing and former world-class Con and Giant orogenic gold deposits, but has been little explored with modern exploration techniques. The Cameron River and Beaulieu River greenstone belts host numerous base and precious metal VMS and BIF-hosted orogenic gold prospects and deposits, indicating mineralization is present. There is considerable potential for significant discoveries to be made using modern exploration techniques in the greenstone belts; however, exploration in the region has been hindered over the past decade by ongoing political negotiations. Once the political negotiations are finalized, application of modern exploration methods and techniques in the prospective greenstone belts should be carried out. Regional scale methodologies should be applied to generate targets using predictive modelling, implicit 3D modelling, 3D geochemistry and exploration targeting so decisions defining a businesses strategy for ground acquisition of high priority targets are made using quantitative analysis. Once ground is acquired, field-based exploration for orogenic gold and VMS deposits should include geological mapping with a focus on structural geology, geochemical sampling and airborne magnetic, radiometric and EM geophysical surveys. Prior to reconnaissance drilling, integration of all data layers and interpretation within a common 3D earth model should be conducted. Following successful reconnaissance drilling, definition drilling along strike and down dip of intersected mineralization, combined with borehole geophysics, should be carried out to delineate the extent of mineralization.
- Full Text:
- Date Issued: 2014
Distribution of heavy minerals sand in Namalope deposit, Moma district, Mozambique
- Authors: Assane, Ali Ossufo
- Date: 2014
- Subjects: Heavy minerals -- Mozambique -- Moma District , Prospecting -- Mozambique -- Moma District , Mines and mineral resources -- Mozambique -- Moma District , Ilmenite -- Research , Zircon -- Research , Rutile -- Research
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5056 , http://hdl.handle.net/10962/d1012169 , Heavy minerals -- Mozambique -- Moma District , Prospecting -- Mozambique -- Moma District , Mines and mineral resources -- Mozambique -- Moma District , Ilmenite -- Research , Zircon -- Research , Rutile -- Research
- Description: The spatial distribution of heavy minerals along the mine paths 2014 and 2015 at the wet concentrate plant B shows an increase of heavy minerals sand concentration northwards and slime contents southwards, and it is commonly associated with depth and grain sorting; the increase of heavy minerals concentration with depth is considered to be from the surface formed by Unit 6 to the bottom of Unit 7. The Unit 82 is characterized by low heavy minerals concentrations and high slime contents declining northwards. The mineral proportion estimation suggests that ilmenite is the most abundant heavy mineral in the entire area followed by zircon, rutile and mozanite, and some accessory minerals such as chromite, kyanite, staurolite, tourmaline, epidote, spinel and quartz. The ilmenite occurrence is divided into ilmenite low (< 53% TiO₂) and high (> 53% TiO₂); the ilmenite high with zircon and rutile shows tendency to increase northwards while ilmenite low increase southwards. Zircon, monazite, rutile, chromite, kyanite and staurolite show low variability, which is probably associated with high resistance of minerals for abrasion during transportation and diagenesis. The depositional model of the Namalope deposit, in the flat area and wet concentrate plant B in particular, suggests deposition in a shallow marine environment associated with regression for deposition of Unit 6, 7 and 9 and transgression during deposition of Unit 82. The spatial distribution of heavy minerals in the Namalope deposit and its environment of deposition are the key points for discovery of new deposits around the Namalope with the same characteristic of mineral assemblage and they are used for mine strategic plans such as update block model and mine design.
- Full Text:
- Date Issued: 2014
- Authors: Assane, Ali Ossufo
- Date: 2014
- Subjects: Heavy minerals -- Mozambique -- Moma District , Prospecting -- Mozambique -- Moma District , Mines and mineral resources -- Mozambique -- Moma District , Ilmenite -- Research , Zircon -- Research , Rutile -- Research
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5056 , http://hdl.handle.net/10962/d1012169 , Heavy minerals -- Mozambique -- Moma District , Prospecting -- Mozambique -- Moma District , Mines and mineral resources -- Mozambique -- Moma District , Ilmenite -- Research , Zircon -- Research , Rutile -- Research
- Description: The spatial distribution of heavy minerals along the mine paths 2014 and 2015 at the wet concentrate plant B shows an increase of heavy minerals sand concentration northwards and slime contents southwards, and it is commonly associated with depth and grain sorting; the increase of heavy minerals concentration with depth is considered to be from the surface formed by Unit 6 to the bottom of Unit 7. The Unit 82 is characterized by low heavy minerals concentrations and high slime contents declining northwards. The mineral proportion estimation suggests that ilmenite is the most abundant heavy mineral in the entire area followed by zircon, rutile and mozanite, and some accessory minerals such as chromite, kyanite, staurolite, tourmaline, epidote, spinel and quartz. The ilmenite occurrence is divided into ilmenite low (< 53% TiO₂) and high (> 53% TiO₂); the ilmenite high with zircon and rutile shows tendency to increase northwards while ilmenite low increase southwards. Zircon, monazite, rutile, chromite, kyanite and staurolite show low variability, which is probably associated with high resistance of minerals for abrasion during transportation and diagenesis. The depositional model of the Namalope deposit, in the flat area and wet concentrate plant B in particular, suggests deposition in a shallow marine environment associated with regression for deposition of Unit 6, 7 and 9 and transgression during deposition of Unit 82. The spatial distribution of heavy minerals in the Namalope deposit and its environment of deposition are the key points for discovery of new deposits around the Namalope with the same characteristic of mineral assemblage and they are used for mine strategic plans such as update block model and mine design.
- Full Text:
- Date Issued: 2014
Distribution of iron-titanium oxides in the vanadiferous main magnetite seam of the upper zone : Northern limb, Bushveld complex
- Authors: Gwatinetsa, Demand
- Date: 2014
- Subjects: Igneous rocks -- South Africa -- Bushveld Complex , Sulfide minerals -- South Africa -- Bushveld Complex , Vanadium -- South Africa -- Bushveld Complex , Titanium dioxide -- South Africa -- Bushveld Complex , Ferric oxide -- South Africa -- Bushveld Complex , Geology -- South Africa -- Bushveld Complex , Mineralogy -- South Africa -- Bushveld Complex , Mines and mineral resources -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5063 , http://hdl.handle.net/10962/d1013281
- Description: The main magnetite seam of the Upper Zone of the Rustenburg Layered Suite (SACS, 1980) on the Bushveld Complex is known to host the world‘s largest vanadium bearing titaniferous iron ores. The vanadiferous titanomagnetites, contain vanadium in sufficient concentrations (1.2 - 2.2 per cent V₂O₅) to be considered as resources and vanadium has been mined historically by a number of companies among them Anglo-American, Highveld Steel and Vanadium and VanMag Resources as well as currently by Evraz Highveld Steel and Vanadium Limited of South Africa. The titanomagnetites contain iron ore in the form of magnetite and titanium with concentrations averaging 50-75 per cent FeO and 12-21 per cent TiO₂. The titaniferous iron ores have been historically dismissed as a source of iron and titanium, due to the known difficulties of using iron ore with high titania content in blast furnaces. The economic potential for the extractability of the titaniferous magnetites lies in the capacity of the ores to be separated into iron rich and titanium rich concentrates usually through, crushing, grinding and magnetic separation. The separatability of iron oxides and titanium oxides, is dependent on the nature in which the titanium oxide occurs, with granular ilmenite being the most favourable since it can be separated from magnetite via magnetic separation. Titanium that occurs as finely exsolved lamellae or as iron-titanium oxides with low titania content such as ulvospinel render the potential recoverability of titanium poor. The Upper Zone vanadiferous titanomagnetites contain titanium in various forms varying from discrete granular ilmenite to finely exsolved lamellae as well as occurring as part of the minerals ulvospinel (Fe₂TiO₄) and titanomagnetite (a solid solution series between ulvospinel and magnetite) . Discrete ilmenite constitutes between 3-5 per cent by volume of the massive titanomagnetite ores, and between 5-10 per cent by volume of the magnetite-plagioclase cumulates with more than 50 per cent opaque oxide minerals. The purpose of this research was to investigate the mineralogical setting and distribution of the iron and titanium oxides within the magnetitite layers from top to bottom as well as spatially along a strike length of 2 000m to determine the potential for the titanium to be extracted from the titanomagnetite ores. The titanomagnetites of the Upper Zone of the Bushveld Complex with particular reference to the Northern Limb where this research was conducted contains titanium oxides as discrete ilmenite grains but in low concentrations whose potential for separate economic extraction will be challenging. The highest concentration of titanium in the magnetite ores is not contained in the granular ilmenite, but rather in ulvospinel and titanomagnetite as illustrated by the marked higher concentration of TiO₂ in the massive ores which contain less granular ilmenite in comparison to the disseminated ores which contain 3 to 8 percentage points higher granular ilmenite than the massive ores. On the scale of the main magnetite seam, the TiO₂ content increases with increasing stratigraphic height from being completely absent in the footwall anorthosite. The V₂2O₅ content also increases with stratigraphic height except for in one of the 3 boreholes where it drops with increasing height. The decrease or increase patterns are repeated in every seam. The titanomagnetites of the main magnetite seam display a variety of textures from coarse granular magnetite and ilmenite, to trellis ilmenite lamellae, intergranular ilmenite and magnesian spinels and fine exsolution lamellae of ulvospinel and ferro-magnesian spinels parallel to the magnetite cleavage. The bottom contact of the main magnetite seam is very sharp and there is no titanium or vanadium in the footwall barely 10cm below the contact. Chromium is present in the bottom of the 4 layers that constitute the main magnetite seam and it upwards decreases rapidly. In boreholes P21 and P55, there are slight reversals in the TiO₂ and V₂O₅ content towards the top of the magnetite seams.
- Full Text:
- Date Issued: 2014
- Authors: Gwatinetsa, Demand
- Date: 2014
- Subjects: Igneous rocks -- South Africa -- Bushveld Complex , Sulfide minerals -- South Africa -- Bushveld Complex , Vanadium -- South Africa -- Bushveld Complex , Titanium dioxide -- South Africa -- Bushveld Complex , Ferric oxide -- South Africa -- Bushveld Complex , Geology -- South Africa -- Bushveld Complex , Mineralogy -- South Africa -- Bushveld Complex , Mines and mineral resources -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5063 , http://hdl.handle.net/10962/d1013281
- Description: The main magnetite seam of the Upper Zone of the Rustenburg Layered Suite (SACS, 1980) on the Bushveld Complex is known to host the world‘s largest vanadium bearing titaniferous iron ores. The vanadiferous titanomagnetites, contain vanadium in sufficient concentrations (1.2 - 2.2 per cent V₂O₅) to be considered as resources and vanadium has been mined historically by a number of companies among them Anglo-American, Highveld Steel and Vanadium and VanMag Resources as well as currently by Evraz Highveld Steel and Vanadium Limited of South Africa. The titanomagnetites contain iron ore in the form of magnetite and titanium with concentrations averaging 50-75 per cent FeO and 12-21 per cent TiO₂. The titaniferous iron ores have been historically dismissed as a source of iron and titanium, due to the known difficulties of using iron ore with high titania content in blast furnaces. The economic potential for the extractability of the titaniferous magnetites lies in the capacity of the ores to be separated into iron rich and titanium rich concentrates usually through, crushing, grinding and magnetic separation. The separatability of iron oxides and titanium oxides, is dependent on the nature in which the titanium oxide occurs, with granular ilmenite being the most favourable since it can be separated from magnetite via magnetic separation. Titanium that occurs as finely exsolved lamellae or as iron-titanium oxides with low titania content such as ulvospinel render the potential recoverability of titanium poor. The Upper Zone vanadiferous titanomagnetites contain titanium in various forms varying from discrete granular ilmenite to finely exsolved lamellae as well as occurring as part of the minerals ulvospinel (Fe₂TiO₄) and titanomagnetite (a solid solution series between ulvospinel and magnetite) . Discrete ilmenite constitutes between 3-5 per cent by volume of the massive titanomagnetite ores, and between 5-10 per cent by volume of the magnetite-plagioclase cumulates with more than 50 per cent opaque oxide minerals. The purpose of this research was to investigate the mineralogical setting and distribution of the iron and titanium oxides within the magnetitite layers from top to bottom as well as spatially along a strike length of 2 000m to determine the potential for the titanium to be extracted from the titanomagnetite ores. The titanomagnetites of the Upper Zone of the Bushveld Complex with particular reference to the Northern Limb where this research was conducted contains titanium oxides as discrete ilmenite grains but in low concentrations whose potential for separate economic extraction will be challenging. The highest concentration of titanium in the magnetite ores is not contained in the granular ilmenite, but rather in ulvospinel and titanomagnetite as illustrated by the marked higher concentration of TiO₂ in the massive ores which contain less granular ilmenite in comparison to the disseminated ores which contain 3 to 8 percentage points higher granular ilmenite than the massive ores. On the scale of the main magnetite seam, the TiO₂ content increases with increasing stratigraphic height from being completely absent in the footwall anorthosite. The V₂2O₅ content also increases with stratigraphic height except for in one of the 3 boreholes where it drops with increasing height. The decrease or increase patterns are repeated in every seam. The titanomagnetites of the main magnetite seam display a variety of textures from coarse granular magnetite and ilmenite, to trellis ilmenite lamellae, intergranular ilmenite and magnesian spinels and fine exsolution lamellae of ulvospinel and ferro-magnesian spinels parallel to the magnetite cleavage. The bottom contact of the main magnetite seam is very sharp and there is no titanium or vanadium in the footwall barely 10cm below the contact. Chromium is present in the bottom of the 4 layers that constitute the main magnetite seam and it upwards decreases rapidly. In boreholes P21 and P55, there are slight reversals in the TiO₂ and V₂O₅ content towards the top of the magnetite seams.
- Full Text:
- Date Issued: 2014
Exploration for sediment-hosted copper mineralization in Kaponda Prospect, Central African Copperbelt, Democratic Republic of Congo
- Authors: Kabunda, Ghislain Mwape
- Date: 2014
- Subjects: Copper mines and mining -- Central African Copperbelt (Congo and Zambia) , Sedimentation -- Central African Copperbelt (Congo and Zambia) , Prospecting -- Central African Copperbelt (Congo and Zambia) , Geological mapping -- Central African Copperbelt (Congo and Zambia) , Geochemistry -- Central African Copperbelt (Congo and Zambia) , Induced polarization
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5061 , http://hdl.handle.net/10962/d1013129
- Description: The Kaponda Prospect represents a surface of 915.8 km² located at about 10 km south of the town of Lubumbashi and 33km NW of Kasumbalesa in the Democratic Republic of Congo (DRC). It lies within Neoproterozoic sedimentary rocks of the Katangan Supergroup in the Central African Copperbelt (CACB). In this province, copper mineralization occurs at different stratigraphic level with different associated alteration. Mineralization is of multistage origin from synsedimentary, diagenetic to post orogenic. Since the discovery of the CACB in the early 20th century, several exploration techniques have been used to delineate Cu deposits. A review and application of these methods including remote sensing, geological mapping, geochemical and geophysical surveys, and drilling, gives an insight of their effectiveness and limitation before analyzing their results from the Kaponda Prospect. The geology and structure of the Prospect is represented by a series of two NW trending disharmonic tight anticlines, locally domal, with cores occupied by either Roan Group or “Grand Conglomerat” Formation. These anticlines are separated by an open syncline made of Kundelungu rocks. Two mains direction of faults are recognized, the NW and NE trending structures. The latter direction are normal transfer faults which can serve as conduit for mineralization. They are related to the late orogenic extension of the Lufilian belt. However NE trending faults are believed to be associated to the climax of Lufilian folding or represents synsedimentary intergrowth faults. Exploration approach for sediment-hosted Cu within Kaponda Prospect, take into account the integration of all information derived from different techniques. Remote sensing is used as aid to geology. Landsat and Google earth images show lineaments that corresponds to lithostratigraphy boundary and domal anticline. Geological mapping identified reduced horizons which can potentially host mineralization, whereas analysis of structure measurements reveals the geometry of fold and direction of its axial plane and hinge. Statistical methods such as the main + 2 standard deviation, the frequency histogram and probability plot, together with experiential method are used to constrain and define Cu and Co thresholds values in soil samples. It appears that in this region, log-probability plot and histogram methods combined with spatial representation and the experience of the region, are the best practice to constrain and separate geochemical background from anomaly data. Ground and airborne magnetic, and radiometric images show specific signatures which map alteration and particularly lithostratigraphy such as “Roan” Group, “Grand Conglomerat” unit, “Nguba” cap carbonates and “Kundelungu” siliciclastic units. Analysis of faults interpreted from geophysical maps identified three major directions: E-W, NE-SW and NW-SE. The E-W faults are also interpreted as normal transfer faults such NE-SW structures, consistent with regional geological map. Although pole-dipole array of induced polarization (IP) survey was directly targeting disseminated Cu sulphide, its results suffer in responding to graphitic rocks and barren pyrite. Only relative small chargeable bodies need to be tested in drilling follow-up. A total of 15 targets have been generated through re-interpretation and integration of both geological mapping and remote sensing, geochemical and geophysical data, as well as existing drilling. Specific recommendations of follow-up works are advised for each type of target.
- Full Text:
- Date Issued: 2014
- Authors: Kabunda, Ghislain Mwape
- Date: 2014
- Subjects: Copper mines and mining -- Central African Copperbelt (Congo and Zambia) , Sedimentation -- Central African Copperbelt (Congo and Zambia) , Prospecting -- Central African Copperbelt (Congo and Zambia) , Geological mapping -- Central African Copperbelt (Congo and Zambia) , Geochemistry -- Central African Copperbelt (Congo and Zambia) , Induced polarization
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5061 , http://hdl.handle.net/10962/d1013129
- Description: The Kaponda Prospect represents a surface of 915.8 km² located at about 10 km south of the town of Lubumbashi and 33km NW of Kasumbalesa in the Democratic Republic of Congo (DRC). It lies within Neoproterozoic sedimentary rocks of the Katangan Supergroup in the Central African Copperbelt (CACB). In this province, copper mineralization occurs at different stratigraphic level with different associated alteration. Mineralization is of multistage origin from synsedimentary, diagenetic to post orogenic. Since the discovery of the CACB in the early 20th century, several exploration techniques have been used to delineate Cu deposits. A review and application of these methods including remote sensing, geological mapping, geochemical and geophysical surveys, and drilling, gives an insight of their effectiveness and limitation before analyzing their results from the Kaponda Prospect. The geology and structure of the Prospect is represented by a series of two NW trending disharmonic tight anticlines, locally domal, with cores occupied by either Roan Group or “Grand Conglomerat” Formation. These anticlines are separated by an open syncline made of Kundelungu rocks. Two mains direction of faults are recognized, the NW and NE trending structures. The latter direction are normal transfer faults which can serve as conduit for mineralization. They are related to the late orogenic extension of the Lufilian belt. However NE trending faults are believed to be associated to the climax of Lufilian folding or represents synsedimentary intergrowth faults. Exploration approach for sediment-hosted Cu within Kaponda Prospect, take into account the integration of all information derived from different techniques. Remote sensing is used as aid to geology. Landsat and Google earth images show lineaments that corresponds to lithostratigraphy boundary and domal anticline. Geological mapping identified reduced horizons which can potentially host mineralization, whereas analysis of structure measurements reveals the geometry of fold and direction of its axial plane and hinge. Statistical methods such as the main + 2 standard deviation, the frequency histogram and probability plot, together with experiential method are used to constrain and define Cu and Co thresholds values in soil samples. It appears that in this region, log-probability plot and histogram methods combined with spatial representation and the experience of the region, are the best practice to constrain and separate geochemical background from anomaly data. Ground and airborne magnetic, and radiometric images show specific signatures which map alteration and particularly lithostratigraphy such as “Roan” Group, “Grand Conglomerat” unit, “Nguba” cap carbonates and “Kundelungu” siliciclastic units. Analysis of faults interpreted from geophysical maps identified three major directions: E-W, NE-SW and NW-SE. The E-W faults are also interpreted as normal transfer faults such NE-SW structures, consistent with regional geological map. Although pole-dipole array of induced polarization (IP) survey was directly targeting disseminated Cu sulphide, its results suffer in responding to graphitic rocks and barren pyrite. Only relative small chargeable bodies need to be tested in drilling follow-up. A total of 15 targets have been generated through re-interpretation and integration of both geological mapping and remote sensing, geochemical and geophysical data, as well as existing drilling. Specific recommendations of follow-up works are advised for each type of target.
- Full Text:
- Date Issued: 2014
Gold mineralisation at Masumbi Au-Cu Prospect, west Kenya : implication for gold exploration in the Archaean Ndori Greenstone Belt of Kenya
- Authors: Salimo, Luckmore
- Date: 2014
- Subjects: Gold mines and mining -- Kenya -- Nyanza Province , Copper -- Kenya -- Nyanza Province , Prospecting -- Kenya -- Nyanza Province , Chalcopyrite -- Kenya -- Nyanza Province , Metamorphism (Geology) , Geochemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5096 , http://hdl.handle.net/10962/d1020961
- Description: The Masumbi Au-Cu deposit in the Ndori Greenstone Belt of western Kenya is hosted in dacitic volcanics of the Nyanzian Group (2710 ± 340 Ma) and dioritic to granodioritic felsic intrusives (2504 ± 48 Ma). The deposit is characterised by gold and copper mineralisation that is associated with quartz-sulphide veins and veinlets. The copper mineralisation typically occurs as chalcopyrite. Gold is closely associated with pyrite in mineralogy and its pathfinder elements silver, bismuth, tellurium and selenium in geochemistry. The gold occurs in two forms that may indicate two generations of precipitation: the equant and the elongate forms. Based on Au/Ag ratios, the equant gold grains can be classified as native gold as their gold content is greater than 90 wt%. The elongate gold grains can be classified as electrums as their silver content is greater than 38 wt%. While there is a strong Au-Ag association within individual gold grains supporting an orogenic model for the gold mineralisation, mineralisation at the Masumbi Prospect appears atypical of Archaean orogenic gold deposits because of the abundance of copper (up to 0.43%). The enrichment of silver, copper, bismuth and tellurium in ore assemblages is common in porphyry, VMS and epithermal systems, but their presence at Masumbi does not preclude the formation as an orogenic deposit. Assay results from three Masumbi diamond drill-holes show an apparent correlation between gold and copper. However, petrography and electron probe microanalyses results from this study indicate that chalcopyrite is an earlier phase than pyrite as it occasionally occurs as inclusions in pyrite. This petrogenetic relationship between pyrite and chalcopyrite suggests that there is no temporal relationship between gold and copper mineralisation. Statistical analysis of the assays shows no linear correlation between gold and copper thereby supporting the above findings. The gold and copper mineralisation have been interpreted as forming as two separate events with copper forming first followed by gold. These events are both related to the intrusion of the felsic rocks that are associated with the Aruan metamorphic event that has been responsible for the bulk of the gold mineralisation on the Tanzanian Craton. The common alteration assemblage in the Masumbi rocks comprises chlorite and epidote. This alteration assemblage is typical of regional greenschist metamorphic facies grading into amphibolite metamorphic facies in the Nyanzian Group of Kenya. However, these alteration minerals could possibly be products of propylitic alteration in the rock groundmass. Other alteration mineral assemblages, possibly of hydrothermal origin, comprise muscovite, sericite, quartz, carbonate, associated with the sulphides pyrite and chalcopyrite. Although the occurrence of gold appears to be controlled by the presence of pyrite, it is also associated with silicification. Exploration methods have been proposed to target undiscovered gold deposits in the Ndori Greenstone Belt that are similar to the Masumbi deposit. These methods could probably be applied to vein-type gold deposits in other granite-greenstone terranes in the Lake Victoria Goldfields.
- Full Text:
- Date Issued: 2014
- Authors: Salimo, Luckmore
- Date: 2014
- Subjects: Gold mines and mining -- Kenya -- Nyanza Province , Copper -- Kenya -- Nyanza Province , Prospecting -- Kenya -- Nyanza Province , Chalcopyrite -- Kenya -- Nyanza Province , Metamorphism (Geology) , Geochemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5096 , http://hdl.handle.net/10962/d1020961
- Description: The Masumbi Au-Cu deposit in the Ndori Greenstone Belt of western Kenya is hosted in dacitic volcanics of the Nyanzian Group (2710 ± 340 Ma) and dioritic to granodioritic felsic intrusives (2504 ± 48 Ma). The deposit is characterised by gold and copper mineralisation that is associated with quartz-sulphide veins and veinlets. The copper mineralisation typically occurs as chalcopyrite. Gold is closely associated with pyrite in mineralogy and its pathfinder elements silver, bismuth, tellurium and selenium in geochemistry. The gold occurs in two forms that may indicate two generations of precipitation: the equant and the elongate forms. Based on Au/Ag ratios, the equant gold grains can be classified as native gold as their gold content is greater than 90 wt%. The elongate gold grains can be classified as electrums as their silver content is greater than 38 wt%. While there is a strong Au-Ag association within individual gold grains supporting an orogenic model for the gold mineralisation, mineralisation at the Masumbi Prospect appears atypical of Archaean orogenic gold deposits because of the abundance of copper (up to 0.43%). The enrichment of silver, copper, bismuth and tellurium in ore assemblages is common in porphyry, VMS and epithermal systems, but their presence at Masumbi does not preclude the formation as an orogenic deposit. Assay results from three Masumbi diamond drill-holes show an apparent correlation between gold and copper. However, petrography and electron probe microanalyses results from this study indicate that chalcopyrite is an earlier phase than pyrite as it occasionally occurs as inclusions in pyrite. This petrogenetic relationship between pyrite and chalcopyrite suggests that there is no temporal relationship between gold and copper mineralisation. Statistical analysis of the assays shows no linear correlation between gold and copper thereby supporting the above findings. The gold and copper mineralisation have been interpreted as forming as two separate events with copper forming first followed by gold. These events are both related to the intrusion of the felsic rocks that are associated with the Aruan metamorphic event that has been responsible for the bulk of the gold mineralisation on the Tanzanian Craton. The common alteration assemblage in the Masumbi rocks comprises chlorite and epidote. This alteration assemblage is typical of regional greenschist metamorphic facies grading into amphibolite metamorphic facies in the Nyanzian Group of Kenya. However, these alteration minerals could possibly be products of propylitic alteration in the rock groundmass. Other alteration mineral assemblages, possibly of hydrothermal origin, comprise muscovite, sericite, quartz, carbonate, associated with the sulphides pyrite and chalcopyrite. Although the occurrence of gold appears to be controlled by the presence of pyrite, it is also associated with silicification. Exploration methods have been proposed to target undiscovered gold deposits in the Ndori Greenstone Belt that are similar to the Masumbi deposit. These methods could probably be applied to vein-type gold deposits in other granite-greenstone terranes in the Lake Victoria Goldfields.
- Full Text:
- Date Issued: 2014
Gold mineralization in a high grade metamorphic terrane in the Handeni District, Eastern Tanzania
- Bitesigirwe, Godfrey Stephen
- Authors: Bitesigirwe, Godfrey Stephen
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54756 , vital:26609
- Description: Most orogenic type gold deposits are formed under low greenschist facies to mid amphibolite facies metamorphic conditions and deposition is either structurally or lithologically controlled. A few known gold deposits found in high grade metamorphic terranes include those in the Yilgarn craton in Australia, Renco in Zimbabwe, Hemlo in Canada and the recently discovered Handeni deposit in Tanzania. Within Tanzania, gold deposits are mainly hosted in Archaean low grade metamorphic rocks commonly known as the Lake Victoria greenstone belt. The greenstone belts of Tanzania are of Nyanzian age (> 2.5Ga) and are located to the south and east of Lake Victoria on the Tanzania craton. The Tanzania Craton is surrounded by Usagaran 1.9 Ga rocks (the east African orogenic belt (EAO) better known as the Mozambique belt) to the east and the Ubendian belt to the south and west. Published reports show that the eastern part of the Tanzania Craton is dominated by the fragments of Archaean rocks. Metamorphism along East Africa and the Tanzania Craton is due to several geological events. These geological events include the intrusion of granites in the Archaean Tanzania Craton (3 Ga), subduction of ocean plate resulted to the formation of Usagaran belt (1.9 Ga), opening and closure of Mozambique Ocean, which resulted in the formation of the Mozambique belt between 700 – 800 Ma and the Pan African orogeny at 640 – 620 Ma, which is associated with the formation of Gondwana. It is believed that fragments from the Archaean Tanzania craton were re - metamorphosed during these events. The Handeni project (the focus of this thesis) is located in the northern portion of the eastern part of the Usagaran belt (1.9 Ga) comprising the eastern part of Archaean Tanzania Craton. The area is characterized by Proterozic rocks of basaltic composition. The documented 2.7 Ga rocks at the Kilindi Handeni Superterrane at the northern part of the Usagaran belt correlate well with 2.7 Ga of Nyanzian rocks of Archaean Tanzania craton. The Handeni project area is geologically dominated by metamorphosed and deformed units of quartzofeldspathic gneisses, migmatitic gneiss, garnet silicified rock, garnetiferous amphibolite, garnetiferous granulite, graphitic schist and hornblende pyroxenite. Intensive deformation features that were developed include folds (sheath folds, micro and macro scales), faults, shears and regional thrusts. This thesis focuses on identifying the protolith of the rocks, alteration minerals, and metamorphic assemblages in the project area in order to understand the timing of gold mineralization. Geological investigation of core, ore petrology and mineralogy, mineral composition by using JEOL microprobe analysis and XRF analysis of bulk rocks were utilized. All the analytical work was done at the Geology laboratory, Rhodes University. Petrographic analysis shows that the rocks sampled in the study area are characterized by alteration minerals such as calcite, dolomite and sericite. Sulphide minerals including chalcopyrite, pyrrhotite, pyrite, pentlandite and gersdorffite were identified. Gold mineralization is associated with disseminated sulphides in association with trace amounts of base metals. Four rock types were proposed as host rocks for the mineralization, namely garnet silicified rock with superimposed quartz veins, garnetiferous amphibolite, garnetiferous granulite and hornblende pyroxenite. Fold troughs, filled fractures associated with episodes of folding, quartz veins and shear zones are suggested as gold precipitation sites. The presence of high grade metamorphic rocks containing gold, intermediate to low grade assemblages with sulphides and associated hydrothermal alteration as well as a complex deformation history suggests that the Handeni mineralization took place over an extended time period stretching from a ductile to a brittle environment.
- Full Text:
- Date Issued: 2014
- Authors: Bitesigirwe, Godfrey Stephen
- Date: 2014
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/54756 , vital:26609
- Description: Most orogenic type gold deposits are formed under low greenschist facies to mid amphibolite facies metamorphic conditions and deposition is either structurally or lithologically controlled. A few known gold deposits found in high grade metamorphic terranes include those in the Yilgarn craton in Australia, Renco in Zimbabwe, Hemlo in Canada and the recently discovered Handeni deposit in Tanzania. Within Tanzania, gold deposits are mainly hosted in Archaean low grade metamorphic rocks commonly known as the Lake Victoria greenstone belt. The greenstone belts of Tanzania are of Nyanzian age (> 2.5Ga) and are located to the south and east of Lake Victoria on the Tanzania craton. The Tanzania Craton is surrounded by Usagaran 1.9 Ga rocks (the east African orogenic belt (EAO) better known as the Mozambique belt) to the east and the Ubendian belt to the south and west. Published reports show that the eastern part of the Tanzania Craton is dominated by the fragments of Archaean rocks. Metamorphism along East Africa and the Tanzania Craton is due to several geological events. These geological events include the intrusion of granites in the Archaean Tanzania Craton (3 Ga), subduction of ocean plate resulted to the formation of Usagaran belt (1.9 Ga), opening and closure of Mozambique Ocean, which resulted in the formation of the Mozambique belt between 700 – 800 Ma and the Pan African orogeny at 640 – 620 Ma, which is associated with the formation of Gondwana. It is believed that fragments from the Archaean Tanzania craton were re - metamorphosed during these events. The Handeni project (the focus of this thesis) is located in the northern portion of the eastern part of the Usagaran belt (1.9 Ga) comprising the eastern part of Archaean Tanzania Craton. The area is characterized by Proterozic rocks of basaltic composition. The documented 2.7 Ga rocks at the Kilindi Handeni Superterrane at the northern part of the Usagaran belt correlate well with 2.7 Ga of Nyanzian rocks of Archaean Tanzania craton. The Handeni project area is geologically dominated by metamorphosed and deformed units of quartzofeldspathic gneisses, migmatitic gneiss, garnet silicified rock, garnetiferous amphibolite, garnetiferous granulite, graphitic schist and hornblende pyroxenite. Intensive deformation features that were developed include folds (sheath folds, micro and macro scales), faults, shears and regional thrusts. This thesis focuses on identifying the protolith of the rocks, alteration minerals, and metamorphic assemblages in the project area in order to understand the timing of gold mineralization. Geological investigation of core, ore petrology and mineralogy, mineral composition by using JEOL microprobe analysis and XRF analysis of bulk rocks were utilized. All the analytical work was done at the Geology laboratory, Rhodes University. Petrographic analysis shows that the rocks sampled in the study area are characterized by alteration minerals such as calcite, dolomite and sericite. Sulphide minerals including chalcopyrite, pyrrhotite, pyrite, pentlandite and gersdorffite were identified. Gold mineralization is associated with disseminated sulphides in association with trace amounts of base metals. Four rock types were proposed as host rocks for the mineralization, namely garnet silicified rock with superimposed quartz veins, garnetiferous amphibolite, garnetiferous granulite and hornblende pyroxenite. Fold troughs, filled fractures associated with episodes of folding, quartz veins and shear zones are suggested as gold precipitation sites. The presence of high grade metamorphic rocks containing gold, intermediate to low grade assemblages with sulphides and associated hydrothermal alteration as well as a complex deformation history suggests that the Handeni mineralization took place over an extended time period stretching from a ductile to a brittle environment.
- Full Text:
- Date Issued: 2014
Petrological, mineralogical and geochemical studies of Zhongchang and Yantiangou ultramafic intrusions from the Panxi region, Sichuan Province, S-W China. Metallogenic and Exploration implications
- Authors: Malatji, Tsholofelo S
- Date: 2014
- Subjects: Mineralogy -- China , Geochemistry -- China
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5057 , http://hdl.handle.net/10962/d1012951
- Description: The Emeishan Large Igneous Province is one of the largest igneous provinces in the world. It is marked by basaltic extrusives that vary in Ti amount, classified as high Ti and low Ti. Several mafic to ultramafic intrusions occur in the province as well as granitic intrusions. The mafic-ultramafic intrusions are associated with mineralization; large layered utlramafic intrusions bearing Fe-Ti-V mineralization, while small dyke like or sill like intrusions contain Cu-Ni-PGE mineralization. The Zhongchang and Yantiangou mafic- ultramafic intrusions are small such intrusions bearing Ni-Cu-PGE mineralization. The deposits show a lot of similarities in source magma, evolution and mineralization. Parental magma for both deposits show alkaline tendencies, and a high Mg # indicative of primitive magma that underwent little crustal contamination. Mantle range Cu/Pd ratios show parental magma fertile in chalcophile elements and both deposits proceed to show depleted mantle normalized values as a result of sulphide saturation and subsequent mineralization. Mineralization in Zhongchang is hosted at the contact between peridotite and pyroxenite, interstitial to olivine and clinopyroxene. Alteration minerals include epidote and chlorite. High Cu/Pd ratios suggest earlier sulphide saturation and removal of a PGE sulphide, and a second sulphide saturation phase resulted in Ni-Cu mineralization. Mineralization in Yantiangou is hosted in biotite effectively following fractionation of olivine and clinopyroxene after which sulphide saturation occurred, precipitating sulphide minerals in biotite. Pyrite and millerite occur as a result of late stage hydrothermal alteration. Cu/Pd ratios are high indicating prior sulphide saturation occurred where PGE partitioned into sulphides. Ni/MgO ratios observed for both deposits indicate a state of sulphide under saturation where PGE partitioned into tellurides and bismurthinides and Ni into olivine. Average tenors for mineralized units are; Zhongchang at 5%Ni, 9% Cu, 4300ppb Pt and 2000ppb Pd, and Yantiangou having relatively lower tenors at 3.2%Ni, 6.5% Cu, 3000ppb Pt and 1300 ppb Pd.
- Full Text:
- Date Issued: 2014
- Authors: Malatji, Tsholofelo S
- Date: 2014
- Subjects: Mineralogy -- China , Geochemistry -- China
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5057 , http://hdl.handle.net/10962/d1012951
- Description: The Emeishan Large Igneous Province is one of the largest igneous provinces in the world. It is marked by basaltic extrusives that vary in Ti amount, classified as high Ti and low Ti. Several mafic to ultramafic intrusions occur in the province as well as granitic intrusions. The mafic-ultramafic intrusions are associated with mineralization; large layered utlramafic intrusions bearing Fe-Ti-V mineralization, while small dyke like or sill like intrusions contain Cu-Ni-PGE mineralization. The Zhongchang and Yantiangou mafic- ultramafic intrusions are small such intrusions bearing Ni-Cu-PGE mineralization. The deposits show a lot of similarities in source magma, evolution and mineralization. Parental magma for both deposits show alkaline tendencies, and a high Mg # indicative of primitive magma that underwent little crustal contamination. Mantle range Cu/Pd ratios show parental magma fertile in chalcophile elements and both deposits proceed to show depleted mantle normalized values as a result of sulphide saturation and subsequent mineralization. Mineralization in Zhongchang is hosted at the contact between peridotite and pyroxenite, interstitial to olivine and clinopyroxene. Alteration minerals include epidote and chlorite. High Cu/Pd ratios suggest earlier sulphide saturation and removal of a PGE sulphide, and a second sulphide saturation phase resulted in Ni-Cu mineralization. Mineralization in Yantiangou is hosted in biotite effectively following fractionation of olivine and clinopyroxene after which sulphide saturation occurred, precipitating sulphide minerals in biotite. Pyrite and millerite occur as a result of late stage hydrothermal alteration. Cu/Pd ratios are high indicating prior sulphide saturation occurred where PGE partitioned into sulphides. Ni/MgO ratios observed for both deposits indicate a state of sulphide under saturation where PGE partitioned into tellurides and bismurthinides and Ni into olivine. Average tenors for mineralized units are; Zhongchang at 5%Ni, 9% Cu, 4300ppb Pt and 2000ppb Pd, and Yantiangou having relatively lower tenors at 3.2%Ni, 6.5% Cu, 3000ppb Pt and 1300 ppb Pd.
- Full Text:
- Date Issued: 2014
The Kansanshi Cu-Au deposit, Domes region, Zambia : geology, mineralisation and alteration characteristics in the main pit
- Authors: Chinyuku, Donald Tichaona
- Date: 2014
- Subjects: Kansanshi Mine -- Zambia , Copper mines and mining -- Zambia , Gold mines and mining -- Zambia , Gold -- Assaying -- Zambia , Geology -- Zambia , Mineralogy -- Zambia , Tillite
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5051 , http://hdl.handle.net/10962/d1011758 , Kansanshi Mine -- Zambia , Copper mines and mining -- Zambia , Gold mines and mining -- Zambia , Gold -- Assaying -- Zambia , Geology -- Zambia , Mineralogy -- Zambia , Tillite
- Description: The Kansanshi Cu-Au deposit located in the Domes region of the North West province of Zambia is characterised by structurally controlled high angle veins and associated alteration halos. The northwest trending Kansanshi antiform flanks the Solwezi syncline to the north and hosts the Kansanshi deposit and consists of tillites and metasedimentary rocks. Mineralisation is associated with Neoproterozoic Pan African deformation events experienced during the formation of the Lufilian fold belt; however recent findings confirm that structures in the form of reverse and normal faults and drag folds are critical controls on mineralisation within the deposit, Main pit in particular. Low angle faults occurring below the current pit are believed to have served as major fluid pathways during mineralisation. Age dating data from the Kansanshi deposit suggest that mineralisation took place between 512 and 503 Ma indicating that the event was associated with metamorphism. Two types of alteration are dominant within the Main pit (Kansanshi deposit) with the type and intensity of alteration being largely controlled by lithological units. Albite alteration occurs dominantly in phyllites and schists whereas dolomitisation is prevalent in calcareous units. Alteration is associated with mineralisation, and therefore is used as a condition for predicting vein or disseminated mineralisation. The high Au tenor at Kansanshi can be attributed to gold grains occurring in association with melonite (NiTe₂) and microfractured pyrite intergrown with chalcopyrite in sulphide and quartz dominated veins and veinlets. Analysis of gold grade distribution within the Main pit shows a clear concentration of the element along the major north-south trending structures like the 4800 and 5400 zones, possibly through supergene enrichment in the oxide-transition-sulphide zones. It is imperative that exploration for Kansanshi-type deposits will require geochemical and geophysical studies, understanding of the geology of an area to identify the three lithostratigraphic units (red beds, evaporites and reducing strata).
- Full Text:
- Date Issued: 2014
- Authors: Chinyuku, Donald Tichaona
- Date: 2014
- Subjects: Kansanshi Mine -- Zambia , Copper mines and mining -- Zambia , Gold mines and mining -- Zambia , Gold -- Assaying -- Zambia , Geology -- Zambia , Mineralogy -- Zambia , Tillite
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5051 , http://hdl.handle.net/10962/d1011758 , Kansanshi Mine -- Zambia , Copper mines and mining -- Zambia , Gold mines and mining -- Zambia , Gold -- Assaying -- Zambia , Geology -- Zambia , Mineralogy -- Zambia , Tillite
- Description: The Kansanshi Cu-Au deposit located in the Domes region of the North West province of Zambia is characterised by structurally controlled high angle veins and associated alteration halos. The northwest trending Kansanshi antiform flanks the Solwezi syncline to the north and hosts the Kansanshi deposit and consists of tillites and metasedimentary rocks. Mineralisation is associated with Neoproterozoic Pan African deformation events experienced during the formation of the Lufilian fold belt; however recent findings confirm that structures in the form of reverse and normal faults and drag folds are critical controls on mineralisation within the deposit, Main pit in particular. Low angle faults occurring below the current pit are believed to have served as major fluid pathways during mineralisation. Age dating data from the Kansanshi deposit suggest that mineralisation took place between 512 and 503 Ma indicating that the event was associated with metamorphism. Two types of alteration are dominant within the Main pit (Kansanshi deposit) with the type and intensity of alteration being largely controlled by lithological units. Albite alteration occurs dominantly in phyllites and schists whereas dolomitisation is prevalent in calcareous units. Alteration is associated with mineralisation, and therefore is used as a condition for predicting vein or disseminated mineralisation. The high Au tenor at Kansanshi can be attributed to gold grains occurring in association with melonite (NiTe₂) and microfractured pyrite intergrown with chalcopyrite in sulphide and quartz dominated veins and veinlets. Analysis of gold grade distribution within the Main pit shows a clear concentration of the element along the major north-south trending structures like the 4800 and 5400 zones, possibly through supergene enrichment in the oxide-transition-sulphide zones. It is imperative that exploration for Kansanshi-type deposits will require geochemical and geophysical studies, understanding of the geology of an area to identify the three lithostratigraphic units (red beds, evaporites and reducing strata).
- Full Text:
- Date Issued: 2014
- «
- ‹
- 1
- ›
- »