The isolation of muscle activity and ground reaction force patterns associated with postural control in four load manipulation tasks
- Authors: Pettengell, Clare Louise
- Date: 2010
- Subjects: Physical fitness , Exercise , Materials handling , Manual work , Lifting and carrying
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5125 , http://hdl.handle.net/10962/d1005203 , Physical fitness , Exercise , Materials handling , Manual work , Lifting and carrying
- Description: Although much effort has been placed into the reduction of risks associated with manual materials handling, risk of musculoskeletal disorder development remains high. This may be due to the additional muscle activity necessary for the maintenance of postural equilibrium during work tasks. This research proposes that postural control and subsequent additional muscle activity is influenced by the magnitude of the external load and the degree of body movement. The objective of this research was to identify whether performing tasks with increased external load and with a greater degree of trunk motion places additional strain on the musculoskeletal system in excess of that imposed by task demands. Twenty-four male and twenty-four female subjects performed four load manipulation tasks under three loading conditions (0.8kg, 1.6kg, and 4kg). Each task comprised of a static and dynamic condition. For the static condition, subjects maintained a stipulated posture for ten seconds. The dynamic condition required subjects to move and replace a box once every three seconds, such that a complete lift and lower cycle was performed in six seconds. Throughout task completion, muscle activity of six pairs of trunk muscles were analysed using surface electromyography. This was accompanied by data regarding ground reaction forces obtained through the use of a force platform. After the completion of each condition subjects were required to identify and rate body discomfort. Differential analysis was used to isolate the muscle activity and ground reaction forces attributed to increased external load and increased trunk movement. It was found that the heaviest loading conditions (4kg) resulted in significantly greater (p<0.05) muscle activation in the majority of muscles during all tasks investigated. The trend of muscle activity attributed to load was similar in all significantly altered muscles and activation was greatest in the heaviest loading condition. A degree of movement efficiency occurred in some muscles when manipulating loads of 0.8kg and 1.6kg. At greater loads, this did not occur suggesting that heavier loading conditions result in additional strain on the body in excess of that imposed by task demands. In manipulated data, trend of vertical ground reaction forces increased with increased load in all tasks. Sagittal movement of the centre of pressure attributed to load was significantly affected in manipulated data in the second movement phase of the “hip shoulder” task and the second movement phase of the “hip twist” task. The “hip reach” task was most affected by increased load magnitude as muscle activity attributed to load was significantly different (p<0.05) under increased loading conditions in both movement phases in all muscles. Further, a significant interactional effect (p<0.05) between condition and data point was found in all muscles with the exception of the right and left lumbar erector spinae during the second movement phase of the “hip reach” task. Muscle activity associated with increased trunk motion resulted in additional strain on the trunk muscles in the “hip shoulder” and “hip reach” tasks as muscle activity associated with the static component of each of the above tasks was greater than that of the dynamic tasks. Trend of ground reaction forces attributed to increased trunk motion generally increased under increased loading conditions. Additionally, a significant interactional effect (p<0.05) between load and muscle activity pattern was found in all muscles during all tasks, with the exception of the right rectus abdominis in the first movement phase of the “hip shoulder’ task, the left rectus abdominis in the second movement phase of the “hip knee” task and the right latissimus dorsi during the first movement phase of the “hip twist” task. This was accompanied by a significant interactional effect (p<0.05) between load and sagittal centre of pressure movement attributed to load, in both movement phases of all tasks investigated. From this research it can be proposed that guidelines may underestimate risk and subsequently under predict the strain in tasks performed with greater external loads as well as tasks which require a greater degree of trunk motion. Therefore, this study illustrates the importance of the consideration of the muscle activity necessary to maintain postural equilibrium in overall load analyses.
- Full Text:
- Authors: Pettengell, Clare Louise
- Date: 2010
- Subjects: Physical fitness , Exercise , Materials handling , Manual work , Lifting and carrying
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5125 , http://hdl.handle.net/10962/d1005203 , Physical fitness , Exercise , Materials handling , Manual work , Lifting and carrying
- Description: Although much effort has been placed into the reduction of risks associated with manual materials handling, risk of musculoskeletal disorder development remains high. This may be due to the additional muscle activity necessary for the maintenance of postural equilibrium during work tasks. This research proposes that postural control and subsequent additional muscle activity is influenced by the magnitude of the external load and the degree of body movement. The objective of this research was to identify whether performing tasks with increased external load and with a greater degree of trunk motion places additional strain on the musculoskeletal system in excess of that imposed by task demands. Twenty-four male and twenty-four female subjects performed four load manipulation tasks under three loading conditions (0.8kg, 1.6kg, and 4kg). Each task comprised of a static and dynamic condition. For the static condition, subjects maintained a stipulated posture for ten seconds. The dynamic condition required subjects to move and replace a box once every three seconds, such that a complete lift and lower cycle was performed in six seconds. Throughout task completion, muscle activity of six pairs of trunk muscles were analysed using surface electromyography. This was accompanied by data regarding ground reaction forces obtained through the use of a force platform. After the completion of each condition subjects were required to identify and rate body discomfort. Differential analysis was used to isolate the muscle activity and ground reaction forces attributed to increased external load and increased trunk movement. It was found that the heaviest loading conditions (4kg) resulted in significantly greater (p<0.05) muscle activation in the majority of muscles during all tasks investigated. The trend of muscle activity attributed to load was similar in all significantly altered muscles and activation was greatest in the heaviest loading condition. A degree of movement efficiency occurred in some muscles when manipulating loads of 0.8kg and 1.6kg. At greater loads, this did not occur suggesting that heavier loading conditions result in additional strain on the body in excess of that imposed by task demands. In manipulated data, trend of vertical ground reaction forces increased with increased load in all tasks. Sagittal movement of the centre of pressure attributed to load was significantly affected in manipulated data in the second movement phase of the “hip shoulder” task and the second movement phase of the “hip twist” task. The “hip reach” task was most affected by increased load magnitude as muscle activity attributed to load was significantly different (p<0.05) under increased loading conditions in both movement phases in all muscles. Further, a significant interactional effect (p<0.05) between condition and data point was found in all muscles with the exception of the right and left lumbar erector spinae during the second movement phase of the “hip reach” task. Muscle activity associated with increased trunk motion resulted in additional strain on the trunk muscles in the “hip shoulder” and “hip reach” tasks as muscle activity associated with the static component of each of the above tasks was greater than that of the dynamic tasks. Trend of ground reaction forces attributed to increased trunk motion generally increased under increased loading conditions. Additionally, a significant interactional effect (p<0.05) between load and muscle activity pattern was found in all muscles during all tasks, with the exception of the right rectus abdominis in the first movement phase of the “hip shoulder’ task, the left rectus abdominis in the second movement phase of the “hip knee” task and the right latissimus dorsi during the first movement phase of the “hip twist” task. This was accompanied by a significant interactional effect (p<0.05) between load and sagittal centre of pressure movement attributed to load, in both movement phases of all tasks investigated. From this research it can be proposed that guidelines may underestimate risk and subsequently under predict the strain in tasks performed with greater external loads as well as tasks which require a greater degree of trunk motion. Therefore, this study illustrates the importance of the consideration of the muscle activity necessary to maintain postural equilibrium in overall load analyses.
- Full Text:
Awkward working postures and precision performance as an example of the relationship between ergonomics and production quality
- Ngcamu, Nokubonga Slindele (Sma)
- Authors: Ngcamu, Nokubonga Slindele (Sma)
- Date: 2009
- Subjects: Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5105 , http://hdl.handle.net/10962/d1005183 , Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Description: Ergonomics aims to improve worker health and enhance productivity and quality. Knowledge and practical evidence of this relationship would be instrumental for optimising organisational performance particularly in industrially developing countries where the discipline is still in its developmental stages. Therefore this thesis set out to analyse the relationship between ergonomics deficiencies and performance. A survey was first conducted to establish the severity of quality problems in the South African manufacturing industry and to determine if these were related to Ergonomic deficiencies. The results indicated that quality problems continue to plague industry, a challenge associated with huge cost implications. Furthermore organisations were not cognisant of the fact that ergonomics deficiencies such as poor workstation design and awkward or constrained working postures are a major contributing factor to poor quality and performance decrements. This demonstrates that much is yet to be done in raising awareness about the benefits of ergonomics in South Africa and other industrially developing countries. However, for this to be effective, tangible evidence of these purported benefits is required. In lieu of this, a laboratory study was then conducted to establish the relationship between awkward working postures and the performance of precision tasks. Acknowledging that the task and the worker are interrelated elements, the impact of precision task demands on the postural strain experienced by the human was also investigated. A high and low precision task quantified positional precision while a force task (combination of pushing and pulling) was utilised to assess the ability to maintain a precise force over time. These three tasks were performed in eight different postures; namely seated, standing, stooping 300 and 600, working overhead, lying supine, and twisting to either side. A combination of the tasks and postures resulted in 24 experimental conditions that were tested on forty eight healthy male and female participants. The performance related dependent variables were movement time, deviation from the centre of the target, and the trend/slope followed by the force exerted. Muscle activity of eight arm, shoulder and back muscles, iii supplemented with heart rate and local ratings of perceived exertion, were utilised to quantify the impact of the tasks and the postures on the individual. The results revealed that awkward working postures do in fact influence performance outcomes. In this regard, awkward working postures (such as overhead work and lying supine and stooping) were evidenced to significantly affect movement time, deviations from the target and the ability to maintain a constant force over time. These variables have a direct relationship with organisational priorities such as productivity and quality. Furthermore, the results indicated that high precision demands augment postural strain elicited through high muscle activity responses and may have negative implications for the precipitation of musculoskeletal disorders. Essentially, the work done on this thesis reflected the complex nature of ergonomics by drawing on both macro and micro-ergonomics approaches. In so doing, challenges perceived to be relevant to industry as reported by organisations formed the foundation for further laboratory studies. Therefore, more collaborative research and knowledge transfer between industry and ergonomics researchers is a necessity particularly in industrially developing countries where ergonomics is still in its developmental stages.
- Full Text:
- Authors: Ngcamu, Nokubonga Slindele (Sma)
- Date: 2009
- Subjects: Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5105 , http://hdl.handle.net/10962/d1005183 , Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Description: Ergonomics aims to improve worker health and enhance productivity and quality. Knowledge and practical evidence of this relationship would be instrumental for optimising organisational performance particularly in industrially developing countries where the discipline is still in its developmental stages. Therefore this thesis set out to analyse the relationship between ergonomics deficiencies and performance. A survey was first conducted to establish the severity of quality problems in the South African manufacturing industry and to determine if these were related to Ergonomic deficiencies. The results indicated that quality problems continue to plague industry, a challenge associated with huge cost implications. Furthermore organisations were not cognisant of the fact that ergonomics deficiencies such as poor workstation design and awkward or constrained working postures are a major contributing factor to poor quality and performance decrements. This demonstrates that much is yet to be done in raising awareness about the benefits of ergonomics in South Africa and other industrially developing countries. However, for this to be effective, tangible evidence of these purported benefits is required. In lieu of this, a laboratory study was then conducted to establish the relationship between awkward working postures and the performance of precision tasks. Acknowledging that the task and the worker are interrelated elements, the impact of precision task demands on the postural strain experienced by the human was also investigated. A high and low precision task quantified positional precision while a force task (combination of pushing and pulling) was utilised to assess the ability to maintain a precise force over time. These three tasks were performed in eight different postures; namely seated, standing, stooping 300 and 600, working overhead, lying supine, and twisting to either side. A combination of the tasks and postures resulted in 24 experimental conditions that were tested on forty eight healthy male and female participants. The performance related dependent variables were movement time, deviation from the centre of the target, and the trend/slope followed by the force exerted. Muscle activity of eight arm, shoulder and back muscles, iii supplemented with heart rate and local ratings of perceived exertion, were utilised to quantify the impact of the tasks and the postures on the individual. The results revealed that awkward working postures do in fact influence performance outcomes. In this regard, awkward working postures (such as overhead work and lying supine and stooping) were evidenced to significantly affect movement time, deviations from the target and the ability to maintain a constant force over time. These variables have a direct relationship with organisational priorities such as productivity and quality. Furthermore, the results indicated that high precision demands augment postural strain elicited through high muscle activity responses and may have negative implications for the precipitation of musculoskeletal disorders. Essentially, the work done on this thesis reflected the complex nature of ergonomics by drawing on both macro and micro-ergonomics approaches. In so doing, challenges perceived to be relevant to industry as reported by organisations formed the foundation for further laboratory studies. Therefore, more collaborative research and knowledge transfer between industry and ergonomics researchers is a necessity particularly in industrially developing countries where ergonomics is still in its developmental stages.
- Full Text: