Application of carbon black and iron phthalocyanine composites in bioelectricity production at a brewery wastewater fed microbial fuel cell
- Mshoperi, Edith, Fogel, Ronen, Limson, Janice
- Authors: Mshoperi, Edith , Fogel, Ronen , Limson, Janice
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/431050 , vital:72740 , xlink:href="https://doi.org/10.1016/j.electacta.2013.11.01"
- Description: Aerobic cathode microbial fuel cells (MFCs) have been widely researched to provide bioremediation of wastewaters, coupled to sustainable energy production. In order to effectively accomplish this aim, suitable catalysts and catalyst supports for oxygen reduction reaction (ORR) are required. While iron phthaloycanine (FePc), supported on multi-walled carbon nanotubes has previously been studied for this function, cost of industrial production may hinder this. Importantly, this study examines the use of several available grades of carbon black for their relative suitability to perform as supports for FePc in MFC formats. Voltammetric studies showed that the different grades of carbon black provided varying lowering of the ORR overpotential, between ∼160 and ∼270 mV relative to unmodified GCEs, and an optimum grade (N326) was selected for further study. Carbon black/FePC composite electrodes exhibited comparable lowering of the ORR overpotential (606 mV) to potentials previously reported to nanotube/FePc composites (620 mV), as well as lowered charge-transfer resistance compared to electrodes solely modified with FePc. When applied as cathode modifiers in dual chambered MFCs utilising Enterobacter cloacae, the combined use of carbon black and FePc provided greater power densities than either alone; composite electrodes obtaining ∼400% power density, compared to unmodified electrodes. Modification of the anode with carbon black further increased power density, generating power densities an order of magnitude larger than those obtained at unmodified electrodes. The ability of beer brewery waste water (BBWW) to generate power at these modified surfaces yielded permissible power densities (∼40% that of reinforced clostridial media). Differences observed, in particular under agitation, are attributed to variations in nutrient content and nutrient complexity, between the two fuel substrates.
- Full Text:
- Authors: Mshoperi, Edith , Fogel, Ronen , Limson, Janice
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/431050 , vital:72740 , xlink:href="https://doi.org/10.1016/j.electacta.2013.11.01"
- Description: Aerobic cathode microbial fuel cells (MFCs) have been widely researched to provide bioremediation of wastewaters, coupled to sustainable energy production. In order to effectively accomplish this aim, suitable catalysts and catalyst supports for oxygen reduction reaction (ORR) are required. While iron phthaloycanine (FePc), supported on multi-walled carbon nanotubes has previously been studied for this function, cost of industrial production may hinder this. Importantly, this study examines the use of several available grades of carbon black for their relative suitability to perform as supports for FePc in MFC formats. Voltammetric studies showed that the different grades of carbon black provided varying lowering of the ORR overpotential, between ∼160 and ∼270 mV relative to unmodified GCEs, and an optimum grade (N326) was selected for further study. Carbon black/FePC composite electrodes exhibited comparable lowering of the ORR overpotential (606 mV) to potentials previously reported to nanotube/FePc composites (620 mV), as well as lowered charge-transfer resistance compared to electrodes solely modified with FePc. When applied as cathode modifiers in dual chambered MFCs utilising Enterobacter cloacae, the combined use of carbon black and FePc provided greater power densities than either alone; composite electrodes obtaining ∼400% power density, compared to unmodified electrodes. Modification of the anode with carbon black further increased power density, generating power densities an order of magnitude larger than those obtained at unmodified electrodes. The ability of beer brewery waste water (BBWW) to generate power at these modified surfaces yielded permissible power densities (∼40% that of reinforced clostridial media). Differences observed, in particular under agitation, are attributed to variations in nutrient content and nutrient complexity, between the two fuel substrates.
- Full Text:
Comparison of fluorophore and peroxidase labeled aptamer assays for MUC1 detection in cancer cells
- Flanagan, Shane, Limson, Janice, Fogel, Ronen
- Authors: Flanagan, Shane , Limson, Janice , Fogel, Ronen
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/431076 , vital:72742 , xlink:href="10.1109/BioCAS.2014.6981720"
- Description: Aptamers hold great promise for cancer diagnosis and therapy. Several biosensors incorporate aptamers as biorecognition elements for tumor markers although few evaluate their detection in a native conformation and cellular micro-environment. In this study, fluorophore and peroxidase labeled aptamer configurations were compared for the detection of MCF7 breast and SW620 colon cancer cell lines expressing the tumor marker MUC1. Fluorescence based detection showed selective binding to the cell lines relative to a nonbinding control sequence with sequence specific binding differences between MUC1 aptamers accredited to variation in the glycosylation state of expressed MUC1. The peroxidase labeled assay showed high detection sensitivity although low binding specificity was observed for the MUC1 aptamers to the cell lines. Results suggest that aptamers susceptible to non specific binding to cells may limit the applicability of enzymatic amplification to improve aptasensor sensitivity.
- Full Text:
- Authors: Flanagan, Shane , Limson, Janice , Fogel, Ronen
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/431076 , vital:72742 , xlink:href="10.1109/BioCAS.2014.6981720"
- Description: Aptamers hold great promise for cancer diagnosis and therapy. Several biosensors incorporate aptamers as biorecognition elements for tumor markers although few evaluate their detection in a native conformation and cellular micro-environment. In this study, fluorophore and peroxidase labeled aptamer configurations were compared for the detection of MCF7 breast and SW620 colon cancer cell lines expressing the tumor marker MUC1. Fluorescence based detection showed selective binding to the cell lines relative to a nonbinding control sequence with sequence specific binding differences between MUC1 aptamers accredited to variation in the glycosylation state of expressed MUC1. The peroxidase labeled assay showed high detection sensitivity although low binding specificity was observed for the MUC1 aptamers to the cell lines. Results suggest that aptamers susceptible to non specific binding to cells may limit the applicability of enzymatic amplification to improve aptasensor sensitivity.
- Full Text:
- «
- ‹
- 1
- ›
- »