Comparative efficiency of immobilized non-transition metal phthalocyanine photosensitizers for the visible light transformation of chlorophenols
- Agboola, Bolade, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286043 , vital:56233 , xlink:href="https://doi.org/10.1016/j.molcata.2005.12.009"
- Description: Photolysis of aqueous solutions of chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,5-trichlorophenol and pentachlorophenol) in the presence of immobilized non-transition metal phthalocyanine photosensitizers onto Amberlite® is presented. The photosensitizers studied are: Al (AlOCPc) and Zn (ZnOCPc) octacarboxyphthalocyanines; Al (AlPcS4) and Zn (ZnPcS4) tetrasulfophthalocyanines; sulfonated phthalocyanine complexes (containing mixtures of differently substituted derivatives) of Al (AlPcSmix), Zn (ZnPcSmix), Ge (GePcSmix), Si (SiPcSmix) and Sn (SnPcSmix). Photolysis of the chlorophenols resulted mainly in the formation of chlorobenzoquinone derivatives. The complexes showed order of activity towards the transformation of pentachlorophenol as follows: ZnOCPc > SiPcSmix > SnPcSmix > ZnPcSmix > GePcSmix > ZnPcS4 > AlPcSmix > AlOCPc > AlPcS4. The generation of singlet oxygen (1O2) by these immobilized MPc photosensitizers was found to play a major role in their photoactivities towards the transformation of these chlorophenols. Langmuir–Hinshelwood (L–H) kinetic model studies showed that the ZnOCPc, GePcSmix and ZnPcSmix photocatalysis occurred on the catalysts surface. © 2005 Elsevier B.V. All rights reserved.
- Full Text:
- Authors: Agboola, Bolade , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286043 , vital:56233 , xlink:href="https://doi.org/10.1016/j.molcata.2005.12.009"
- Description: Photolysis of aqueous solutions of chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,5-trichlorophenol and pentachlorophenol) in the presence of immobilized non-transition metal phthalocyanine photosensitizers onto Amberlite® is presented. The photosensitizers studied are: Al (AlOCPc) and Zn (ZnOCPc) octacarboxyphthalocyanines; Al (AlPcS4) and Zn (ZnPcS4) tetrasulfophthalocyanines; sulfonated phthalocyanine complexes (containing mixtures of differently substituted derivatives) of Al (AlPcSmix), Zn (ZnPcSmix), Ge (GePcSmix), Si (SiPcSmix) and Sn (SnPcSmix). Photolysis of the chlorophenols resulted mainly in the formation of chlorobenzoquinone derivatives. The complexes showed order of activity towards the transformation of pentachlorophenol as follows: ZnOCPc > SiPcSmix > SnPcSmix > ZnPcSmix > GePcSmix > ZnPcS4 > AlPcSmix > AlOCPc > AlPcS4. The generation of singlet oxygen (1O2) by these immobilized MPc photosensitizers was found to play a major role in their photoactivities towards the transformation of these chlorophenols. Langmuir–Hinshelwood (L–H) kinetic model studies showed that the ZnOCPc, GePcSmix and ZnPcSmix photocatalysis occurred on the catalysts surface. © 2005 Elsevier B.V. All rights reserved.
- Full Text:
Comparative electrochemistry and electrocatalytic activities of cobalt, iron and manganese phthalocyanine complexes axially co-ordinated to mercaptopyridine self-assembled monolayer at gold electrodes
- Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286054 , vital:56234 , xlink:href="https://doi.org/10.1016/j.electacta.2005.08.007"
- Description: Comparative surface electrochemistry and electrocatalytic properties of solid ultrathin monolayer films of metallophthalocyanine (MPc) complexes of cobalt (CoPc), iron (FePc) and manganese (MnPc) self-immobilised, via axial ligation reaction, onto preformed 4-mercaptopyridine self-assembled monolayers (SAMs) on gold electrodes have been described. Surface electrochemical parameters of the modified electrodes showed that these MPc-SAMs are densely packed with flat orientations. The electrochemical, electrocatalytic and stability properties of these MPc complexes follow this order: FePc > MnPc > CoPc. This finding is remarkable as it suggests that the success of using this method of self-assembling of MPc onto gold electrode is largely dependent on the bond distance between the pyridine linker and the central metal of the MPc; the shorter the distance, the faster the co-ordination and the better the electrocatalytic properties towards L-cysteine and thiocyanate. Thus, the superiority of FePc-based SAM over those of the MnPc and CoPc, has been proposed to be the result of the more favorable axial co-ordination properties of FePc with pyridine (i.e. shorter Fe–N(pyridine) bond length.
- Full Text:
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286054 , vital:56234 , xlink:href="https://doi.org/10.1016/j.electacta.2005.08.007"
- Description: Comparative surface electrochemistry and electrocatalytic properties of solid ultrathin monolayer films of metallophthalocyanine (MPc) complexes of cobalt (CoPc), iron (FePc) and manganese (MnPc) self-immobilised, via axial ligation reaction, onto preformed 4-mercaptopyridine self-assembled monolayers (SAMs) on gold electrodes have been described. Surface electrochemical parameters of the modified electrodes showed that these MPc-SAMs are densely packed with flat orientations. The electrochemical, electrocatalytic and stability properties of these MPc complexes follow this order: FePc > MnPc > CoPc. This finding is remarkable as it suggests that the success of using this method of self-assembling of MPc onto gold electrode is largely dependent on the bond distance between the pyridine linker and the central metal of the MPc; the shorter the distance, the faster the co-ordination and the better the electrocatalytic properties towards L-cysteine and thiocyanate. Thus, the superiority of FePc-based SAM over those of the MnPc and CoPc, has been proposed to be the result of the more favorable axial co-ordination properties of FePc with pyridine (i.e. shorter Fe–N(pyridine) bond length.
- Full Text:
Effects of ring substituents on electrocatalytic activity of manganese phthalocyanines towards the reduction of molecular oxygen
- Sehlotho, Nthapo, Nyokong, Tebello
- Authors: Sehlotho, Nthapo , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6594 , http://hdl.handle.net/10962/d1004343
- Description: Reduction of oxygen electrocatalyzed by adsorbed films of manganese phthalocyanine complexes is reported. The complexes studied were: manganese phthalocyanine (MnPc, 1); manganese tetraamino phthalocyanine (MnTAPc, 2); manganese tetrapentoxy pyrrole phthalocyanine (MnTPePyrPc, 3); manganese tetra phenoxy pyrrole phthalocyanine (MnTPPyrPc, 4); manganese tetra mercaptopyrimidine phthalocyanine (MnTMPyPc, 5) and manganese tetra ethoxy thiophene phthalocyanine (MnTETPc, 6). The reaction was conducted in buffer solutions of pH range 1–12. Rotating disk electrode voltammetry revealed two electron reduction in acidic and slightly alkaline media due to the formation of hydrogen peroxide. In highly basic media, water is the major product formed via four electron transfer. The reaction was found to be first order in the diffusing analyte oxygen.
- Full Text:
- Authors: Sehlotho, Nthapo , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6594 , http://hdl.handle.net/10962/d1004343
- Description: Reduction of oxygen electrocatalyzed by adsorbed films of manganese phthalocyanine complexes is reported. The complexes studied were: manganese phthalocyanine (MnPc, 1); manganese tetraamino phthalocyanine (MnTAPc, 2); manganese tetrapentoxy pyrrole phthalocyanine (MnTPePyrPc, 3); manganese tetra phenoxy pyrrole phthalocyanine (MnTPPyrPc, 4); manganese tetra mercaptopyrimidine phthalocyanine (MnTMPyPc, 5) and manganese tetra ethoxy thiophene phthalocyanine (MnTETPc, 6). The reaction was conducted in buffer solutions of pH range 1–12. Rotating disk electrode voltammetry revealed two electron reduction in acidic and slightly alkaline media due to the formation of hydrogen peroxide. In highly basic media, water is the major product formed via four electron transfer. The reaction was found to be first order in the diffusing analyte oxygen.
- Full Text:
Electrocatalysis of asulam on cobalt phthalocyanine modified multi-walled carbon nanotubes immobilized on a basal plane pyrolytic graphite electrode
- Siswana, Msimelelo P, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Siswana, Msimelelo P , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6595 , http://hdl.handle.net/10962/d1004344
- Description: This work describes the electrochemical properties of cobalt tetra-aminophthalocyanine (CoTAPc) complex electropolymerized at the surface of multi-walled carbon nanotube (MWCNT) abrasively immobilized onto a basal plane pyrolytic graphite electrode (BPPGE). The constructed electrode displayed excellent electrocatalytic behaviour towards the oxidation of the herbicide, asulam, as evidenced by the enhancement of the oxidation peak current (~6 times) and the shift in the oxidation potential to lower values (by ~120 mV) in comparison with the bare BPPGE. The chronoamperometric detection of asulam which was carried out in 0.10 M phosphate buffer (pH 7.0) at a fixed potential of 0.65 V (versus Ag|AgCl) yielded excellent analytical parameters; a linear concentration range of 4.5–20 μM, a sensitivity of 241 × 10[superscript −3] μA/μM, a detection limit of 1.15 μM asulam (using the Y[subscript B] + 3σ criterion) and a response time of ~2 s.
- Full Text:
- Authors: Siswana, Msimelelo P , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6595 , http://hdl.handle.net/10962/d1004344
- Description: This work describes the electrochemical properties of cobalt tetra-aminophthalocyanine (CoTAPc) complex electropolymerized at the surface of multi-walled carbon nanotube (MWCNT) abrasively immobilized onto a basal plane pyrolytic graphite electrode (BPPGE). The constructed electrode displayed excellent electrocatalytic behaviour towards the oxidation of the herbicide, asulam, as evidenced by the enhancement of the oxidation peak current (~6 times) and the shift in the oxidation potential to lower values (by ~120 mV) in comparison with the bare BPPGE. The chronoamperometric detection of asulam which was carried out in 0.10 M phosphate buffer (pH 7.0) at a fixed potential of 0.65 V (versus Ag|AgCl) yielded excellent analytical parameters; a linear concentration range of 4.5–20 μM, a sensitivity of 241 × 10[superscript −3] μA/μM, a detection limit of 1.15 μM asulam (using the Y[subscript B] + 3σ criterion) and a response time of ~2 s.
- Full Text:
Electrocatalysis of oxidation of 2-mercaptoethanol, L-cysteine and reduced glutathione by adsorbed and electrodeposited cobalt tetra phenoxypyrrole and tetra ethoxythiophene substituted phthalocyanines
- Sehlotho, Nthapo, Nyokong, Tebello, Zagal, Jose H, Bedioui, Fethi
- Authors: Sehlotho, Nthapo , Nyokong, Tebello , Zagal, Jose H , Bedioui, Fethi
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6593 , http://hdl.handle.net/10962/d1004342
- Description: Catalytic activity of cobalt tetra ethoxythiophene and cobalt tetra phenoxypyrrole phthalocyanine complexes towards oxidation of 2-mercaptoethanol, L-cysteine and reduced glutathione is reported. It was found that the activity of the complexes depends on the substitution of the phthalocyanine ring, pH, film thickness and method of electrode modification. The high electrocatalytic activity obtained with adsorbed complexes in alkaline medium clearly demonstrates the necessity of modifying bare carbon electrodes to endow them with the desired behaviour.
- Full Text:
- Authors: Sehlotho, Nthapo , Nyokong, Tebello , Zagal, Jose H , Bedioui, Fethi
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6593 , http://hdl.handle.net/10962/d1004342
- Description: Catalytic activity of cobalt tetra ethoxythiophene and cobalt tetra phenoxypyrrole phthalocyanine complexes towards oxidation of 2-mercaptoethanol, L-cysteine and reduced glutathione is reported. It was found that the activity of the complexes depends on the substitution of the phthalocyanine ring, pH, film thickness and method of electrode modification. The high electrocatalytic activity obtained with adsorbed complexes in alkaline medium clearly demonstrates the necessity of modifying bare carbon electrodes to endow them with the desired behaviour.
- Full Text:
Electrocatalytic behaviour of carbon paste electrode modified with iron(II) phthalocyanine (FePc) nanoparticles towards the detection of amitrole
- Siswana, Msimelelo P, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Siswana, Msimelelo P , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6591 , http://hdl.handle.net/10962/d1004340
- Description: This paper describes the construction of a carbon paste electrode (CPE) impregnated with nanoparticles of iron(II) phthalocyanine (nanoFePc). The new electrode (nanoFePc-CPE) revealed interesting electrocatalytic behaviour towards amitrole; pure catalytic diffusion-controlled process, with high Tafel slope (235 mV/decade) suggesting strong binding of amitrole with nanoFePc catalyst. The effects of catalyst loading, varying pH and electrolytes were studied. The mechanism for the interaction of amitrole with the nanoFePc is proposed to involve the Fe[superscript (III)]Pc/Fe[superscript (II)]Pc redox process. Using chronoamperometry (E = +0.42 V versus Ag/AgCl) technique, the sensor was reliably employed for amitrole assay at pH 12.0 phosphate buffer (with sodium sulphate as the supporting electrolyte) for up to 12 nM amitrole with excellent sensitivity (ca. 3.44 μA/nM) and low detection limit (3.62 ± 0.11 nM, i.e. 0.305 μg L[superscript (−1)] using the YB + 3σB criterion and 0.85 ± 0.03 nM, i.e. 70 ng/L with the Y[subscript B] + 2[subscript σB] criterion) as well as satisfactory amperometric selectivity coefficient (K[subscript amp] ≈ 7.4 × 10[superscript (−4)] for ammonium thiocyanate, a component of many amitrole herbicides, and 3.2 × 10[superscript (−3)] for asulam pesticide). The surface of the electrode can easily be regenerated by simple polishing on an alumina paper, obtaining a fresh surface ready for use in a new assay. The proposed electrode was successfully applied in the quantification of amitrole in its commercial formulation as well as in tap water samples.
- Full Text:
- Authors: Siswana, Msimelelo P , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6591 , http://hdl.handle.net/10962/d1004340
- Description: This paper describes the construction of a carbon paste electrode (CPE) impregnated with nanoparticles of iron(II) phthalocyanine (nanoFePc). The new electrode (nanoFePc-CPE) revealed interesting electrocatalytic behaviour towards amitrole; pure catalytic diffusion-controlled process, with high Tafel slope (235 mV/decade) suggesting strong binding of amitrole with nanoFePc catalyst. The effects of catalyst loading, varying pH and electrolytes were studied. The mechanism for the interaction of amitrole with the nanoFePc is proposed to involve the Fe[superscript (III)]Pc/Fe[superscript (II)]Pc redox process. Using chronoamperometry (E = +0.42 V versus Ag/AgCl) technique, the sensor was reliably employed for amitrole assay at pH 12.0 phosphate buffer (with sodium sulphate as the supporting electrolyte) for up to 12 nM amitrole with excellent sensitivity (ca. 3.44 μA/nM) and low detection limit (3.62 ± 0.11 nM, i.e. 0.305 μg L[superscript (−1)] using the YB + 3σB criterion and 0.85 ± 0.03 nM, i.e. 70 ng/L with the Y[subscript B] + 2[subscript σB] criterion) as well as satisfactory amperometric selectivity coefficient (K[subscript amp] ≈ 7.4 × 10[superscript (−4)] for ammonium thiocyanate, a component of many amitrole herbicides, and 3.2 × 10[superscript (−3)] for asulam pesticide). The surface of the electrode can easily be regenerated by simple polishing on an alumina paper, obtaining a fresh surface ready for use in a new assay. The proposed electrode was successfully applied in the quantification of amitrole in its commercial formulation as well as in tap water samples.
- Full Text:
Electrocatalytic oxidation of thiocyanate, L-cysteine and 2-mercaptoethanol by self-assembled monolayer of cobalt tetraethoxy thiophene phthalocyanine
- Sehlotho, Nthapo, Nyokong, Tebello
- Authors: Sehlotho, Nthapo , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283814 , vital:55993 , xlink:href="https://doi.org/10.1016/j.electacta.2005.12.024"
- Description: Catalytic activity of a self-assembled monolayer (SAM) of cobalt tetra ethoxythiophene phthalocyanine (CoTEThPc-SAM) complex towards oxidation of thiocyanate (SCN−), L-cysteine (CYS) and 2-mercaptoethanol (2-ME) is reported. The oxidation of thiocyanate occurs via a two electron transfer, whereas L-cysteine and 2-ME require 1 electron. The oxidation of thiocyanate is catalysed by ring based processes, while L-cysteine is catalysed by both CoIII/CoII process and by ring based processes. 2-ME is catalysed by CoIII/CoII process. The oxidation of thiocyanate on CoTEThPc was performed in acid media instead of basic media commonly employed. The reaction order was found to be unity for all the analytes, showing that only one molecule of analyte interacts with one molecule of the catalyst during the rate determining step.
- Full Text:
- Authors: Sehlotho, Nthapo , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283814 , vital:55993 , xlink:href="https://doi.org/10.1016/j.electacta.2005.12.024"
- Description: Catalytic activity of a self-assembled monolayer (SAM) of cobalt tetra ethoxythiophene phthalocyanine (CoTEThPc-SAM) complex towards oxidation of thiocyanate (SCN−), L-cysteine (CYS) and 2-mercaptoethanol (2-ME) is reported. The oxidation of thiocyanate occurs via a two electron transfer, whereas L-cysteine and 2-ME require 1 electron. The oxidation of thiocyanate is catalysed by ring based processes, while L-cysteine is catalysed by both CoIII/CoII process and by ring based processes. 2-ME is catalysed by CoIII/CoII process. The oxidation of thiocyanate on CoTEThPc was performed in acid media instead of basic media commonly employed. The reaction order was found to be unity for all the analytes, showing that only one molecule of analyte interacts with one molecule of the catalyst during the rate determining step.
- Full Text:
Electrochemical properties of benzylmercapto and dodecylmercapto tetra substituted nickel phthalocyanine complexes: Electrocatalytic oxidation of nitrite
- Agboola, Bolade O, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Agboola, Bolade O , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6562 , http://hdl.handle.net/10962/d1003826
- Description: Nickel tetrakis(benzylmercapto)phthalocyanine (NiTBMPc) and nickel tetrakis(dodecylmercapto)phthalocyanine (NiTDMPc) complexes were synthesized and their spectral and electrochemical properties reported. The CV showed four or five redox processes for NiTBMPc and NiTDMPc, respectively. For the first time, spectroelectrochemistry gave evidence for the formation of NiII/NiI process in a NiPc complex. The rest of the processes were ring based. The NiTBMPc complex was successfully deposited on both gold and glassy carbon electrodes by electropolymerisation while NiTDMPc complex was deposited on gold electrode only. The films were electro-transformed in aqueous 0.1 M NaOH solution to the O–Ni–O oxo bridged form. The modified electrodes were characterized using electrochemical impedance spectroscopy and the results showed typical behavior for modified electrodes. Electrodes with poly-Ni(OH)Pcs films exhibited higher charge transfer resistance values, Rp than their corresponding poly-NiPcs films counterparts. All the modified electrodes showed improved catalytic activities than the unmodified electrodes towards nitrite ions electrooxidation. Better catalytic activities were observed for the modified electrodes when they were transformed to O–Ni–O oxo bridge form. All the modified electrodes exhibited high resistance to electrode surface passivation.
- Full Text:
- Authors: Agboola, Bolade O , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6562 , http://hdl.handle.net/10962/d1003826
- Description: Nickel tetrakis(benzylmercapto)phthalocyanine (NiTBMPc) and nickel tetrakis(dodecylmercapto)phthalocyanine (NiTDMPc) complexes were synthesized and their spectral and electrochemical properties reported. The CV showed four or five redox processes for NiTBMPc and NiTDMPc, respectively. For the first time, spectroelectrochemistry gave evidence for the formation of NiII/NiI process in a NiPc complex. The rest of the processes were ring based. The NiTBMPc complex was successfully deposited on both gold and glassy carbon electrodes by electropolymerisation while NiTDMPc complex was deposited on gold electrode only. The films were electro-transformed in aqueous 0.1 M NaOH solution to the O–Ni–O oxo bridged form. The modified electrodes were characterized using electrochemical impedance spectroscopy and the results showed typical behavior for modified electrodes. Electrodes with poly-Ni(OH)Pcs films exhibited higher charge transfer resistance values, Rp than their corresponding poly-NiPcs films counterparts. All the modified electrodes showed improved catalytic activities than the unmodified electrodes towards nitrite ions electrooxidation. Better catalytic activities were observed for the modified electrodes when they were transformed to O–Ni–O oxo bridge form. All the modified electrodes exhibited high resistance to electrode surface passivation.
- Full Text:
Electropolymerizable iron (III) and cobalt (II) dicyanophenoxy tetraphenylporphyrin complexes
- Ozoemena, Kenneth I, Zhao, Zhixin, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Zhao, Zhixin , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286080 , vital:56236 , xlink:href="https://doi.org/10.1016/j.inoche.2005.11.024"
- Description: Solution and solid phase electrochemical features of 5-[4-(3,4-dicyanophenoxy)phenyl],10,15,20-triphenylporphyrin complexes of iron(III) (FeCNOTPP(Cl)) and cobalt(II) (CoCNOTPP) have been described. These novel asymmetric dicyanophenoxy-derivatised cobalt and iron porphyrin complexes were electropolymerised onto glassy carbon electrodes, which in aqueous solutions, gave surface concentrations (ca. 10−10 mol cm−2) typical of monolayer coverages. The films also exhibited excellent stability and electrocatalysis towards the direct detection of important analytes as nitrite, nitric oxide, and hydrogen peroxide in aqueous solutions.
- Full Text:
- Authors: Ozoemena, Kenneth I , Zhao, Zhixin , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286080 , vital:56236 , xlink:href="https://doi.org/10.1016/j.inoche.2005.11.024"
- Description: Solution and solid phase electrochemical features of 5-[4-(3,4-dicyanophenoxy)phenyl],10,15,20-triphenylporphyrin complexes of iron(III) (FeCNOTPP(Cl)) and cobalt(II) (CoCNOTPP) have been described. These novel asymmetric dicyanophenoxy-derivatised cobalt and iron porphyrin complexes were electropolymerised onto glassy carbon electrodes, which in aqueous solutions, gave surface concentrations (ca. 10−10 mol cm−2) typical of monolayer coverages. The films also exhibited excellent stability and electrocatalysis towards the direct detection of important analytes as nitrite, nitric oxide, and hydrogen peroxide in aqueous solutions.
- Full Text:
Novel amperometric glucose biosensor based on an ether-linked cobalt(II) phthalocyaninecobalt(II) tetraphenylporphyrin pentamer as a redox mediator
- Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6583 , http://hdl.handle.net/10962/d1004148
- Description: The development of cobalt(II) phthalocyanine–cobalt(II) tetra(5-phenoxy-10,15,20-triphenylporphyrin), (CoPc–(CoTPP)[subscript 4]) pentamer as a novel redox mediator for amperometric enzyme electrode sensitive to glucose is described. A glassy carbon electrode (GCE) was first modified with the pentamer, then followed by the immobilization onto the GCE–CoPc–(CoTPP)[subscript 4] with glucose oxidase (GOx) through cross-linking with glutaraldehyde in the presence of bovine serum albumin (BSA) and Nafion® cation-exchange polymer. The proposed biosensor displayed good amperometric respose charateristics to glucose in pH 7.0 PBS solution; such as low overpotentials (+400 mV versus Ag|AgCl), very fast amperometric response time (~5 s), linear concentration range extended up to 11 mM, with 10 μM detection limit. The biosensor exhibited electrochemical Michaelis–Menten kinetics and showed an average apparent Michaelis–Menten constant (K′M) of 14.91 ± 0.46 mM over a storage period of 2 weeks.
- Full Text:
- Authors: Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6583 , http://hdl.handle.net/10962/d1004148
- Description: The development of cobalt(II) phthalocyanine–cobalt(II) tetra(5-phenoxy-10,15,20-triphenylporphyrin), (CoPc–(CoTPP)[subscript 4]) pentamer as a novel redox mediator for amperometric enzyme electrode sensitive to glucose is described. A glassy carbon electrode (GCE) was first modified with the pentamer, then followed by the immobilization onto the GCE–CoPc–(CoTPP)[subscript 4] with glucose oxidase (GOx) through cross-linking with glutaraldehyde in the presence of bovine serum albumin (BSA) and Nafion® cation-exchange polymer. The proposed biosensor displayed good amperometric respose charateristics to glucose in pH 7.0 PBS solution; such as low overpotentials (+400 mV versus Ag|AgCl), very fast amperometric response time (~5 s), linear concentration range extended up to 11 mM, with 10 μM detection limit. The biosensor exhibited electrochemical Michaelis–Menten kinetics and showed an average apparent Michaelis–Menten constant (K′M) of 14.91 ± 0.46 mM over a storage period of 2 weeks.
- Full Text:
Preferential electrosorption of cobalt (II) tetra-aminophthalocyanine at single-wall carbon nanotubes immobilized on a basal plane pyrolytic graphite electrode
- Ozoemena, Kenneth I, Pillay, J, Nyokong, Tebello
- Authors: Ozoemena, Kenneth I , Pillay, J , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6584 , http://hdl.handle.net/10962/d1004160
- Description: This communication describes the preferential electrosorption of cobalt (II) tetra-aminophthalocyanine (CoTAPc) (rather than the expected electropolymerisation) onto a SWCNT immobilized on a basal plane pyrolytic graphite electrode (BPPGE). Cyclic voltammetric and electrochemical impedance spectroscopic data revealed that the electrosorbed CoTAPc is highly stable, well organized with comparable electron-transfer rate constant in ferricyanide solution (k[subscript app] ~ 6 × 10[superscript (−5)] cm s[superscript (−1)] order) to that of the SWNCT. Electrochemical kinetics of the electrosorbed CoTAPc yielded k[subscript s] of 0.169 s[superscript (−1)] and 832.2 s[superscript (−1)] for the cathodic and anodic reactions, respectively, indicative of different rate-determining steps for the cathodic and anodic reactions. Strong π-stacking interactions between CoTAPc and the sidewalls of the SWCNTs, with possible synergistic covalent interactions, are explained as responsible for the preferential electrosorption process. Both BPPGE-SWCNT-CoTAPc[subscript (ads)] and BPPGE-SWCNT showed comparable electrocatalytic responses towards the detection of 2-(diethylamino) ethanethiol (DEAET).
- Full Text:
- Authors: Ozoemena, Kenneth I , Pillay, J , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6584 , http://hdl.handle.net/10962/d1004160
- Description: This communication describes the preferential electrosorption of cobalt (II) tetra-aminophthalocyanine (CoTAPc) (rather than the expected electropolymerisation) onto a SWCNT immobilized on a basal plane pyrolytic graphite electrode (BPPGE). Cyclic voltammetric and electrochemical impedance spectroscopic data revealed that the electrosorbed CoTAPc is highly stable, well organized with comparable electron-transfer rate constant in ferricyanide solution (k[subscript app] ~ 6 × 10[superscript (−5)] cm s[superscript (−1)] order) to that of the SWNCT. Electrochemical kinetics of the electrosorbed CoTAPc yielded k[subscript s] of 0.169 s[superscript (−1)] and 832.2 s[superscript (−1)] for the cathodic and anodic reactions, respectively, indicative of different rate-determining steps for the cathodic and anodic reactions. Strong π-stacking interactions between CoTAPc and the sidewalls of the SWCNTs, with possible synergistic covalent interactions, are explained as responsible for the preferential electrosorption process. Both BPPGE-SWCNT-CoTAPc[subscript (ads)] and BPPGE-SWCNT showed comparable electrocatalytic responses towards the detection of 2-(diethylamino) ethanethiol (DEAET).
- Full Text:
Self-assembled monolayers (SAMs) of cobalt tetracarboxylic acidchloride phthalocyanine covalently attached onto a preformed mercaptoethanol SAM
- Mashazi, Philani N, Ozoemena, Kenneth I, Maree, David M, Nyokong, Tebello
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Maree, David M , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283792 , vital:55989 , xlink:href="https://doi.org/10.1016/j.electacta.2005.10.004"
- Description: A feasible method of fabricating phthalocyanine sensor was developed by covalent attachment of cobalt tetracarboxylic acidchloride phthalocyanine (CoTCACIPc) onto a preformed 2-mercaptoethanol (2-ME) self-assembled monolayer (SAM) modified gold electrode (designated as CoTCACIPc-2-ME-SAM). The surface concentration of the CoTCACIPc was found to be 4.58 × 10−10 mol/cm2. The sensor gave a linear response to L-cysteine over the concentration range 0.28–20 μM with a detection limit of 5 × 10−7 M and best response time of 2 s.
- Full Text:
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Maree, David M , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283792 , vital:55989 , xlink:href="https://doi.org/10.1016/j.electacta.2005.10.004"
- Description: A feasible method of fabricating phthalocyanine sensor was developed by covalent attachment of cobalt tetracarboxylic acidchloride phthalocyanine (CoTCACIPc) onto a preformed 2-mercaptoethanol (2-ME) self-assembled monolayer (SAM) modified gold electrode (designated as CoTCACIPc-2-ME-SAM). The surface concentration of the CoTCACIPc was found to be 4.58 × 10−10 mol/cm2. The sensor gave a linear response to L-cysteine over the concentration range 0.28–20 μM with a detection limit of 5 × 10−7 M and best response time of 2 s.
- Full Text:
Self-assembled monolayers and electropolymerized thin films of phthalocyanines as molecular materials for electroanalysis
- Nyokong, Tebello, Bedioui, Fethi
- Authors: Nyokong, Tebello , Bedioui, Fethi
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283826 , vital:55994 , xlink:href="https://doi.org/10.1142/S1088424606000454"
- Description: In this review, we report on the newly developed area of research devoted to the formation of self-assembled monolayers of metallophthalocyanines by focusing on some significant examples dedicated to electroanalytical applications. We also summarize recent examples on the use of electropolymerized metallophthalocyanine films in electroanalysis. In both cases, activation and detection of thiols are the main targeted applications.
- Full Text:
- Authors: Nyokong, Tebello , Bedioui, Fethi
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283826 , vital:55994 , xlink:href="https://doi.org/10.1142/S1088424606000454"
- Description: In this review, we report on the newly developed area of research devoted to the formation of self-assembled monolayers of metallophthalocyanines by focusing on some significant examples dedicated to electroanalytical applications. We also summarize recent examples on the use of electropolymerized metallophthalocyanine films in electroanalysis. In both cases, activation and detection of thiols are the main targeted applications.
- Full Text:
Self-assembled monolayers and electropolymerized thin films of phthalocyanines as molecular materials for electroanalysis
- Nyokong, Tebello, Bedioui, Fethi
- Authors: Nyokong, Tebello , Bedioui, Fethi
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283851 , vital:55996 , xlink:href="https://doi.org/10.1142/S1088424606000454"
- Description: In this review, we report on the newly developed area of research devoted to the formation of self-assembled monolayers of metallophthalocyanines by focusing on some significant examples dedicated to electroanalytical applications. We also summarize recent examples on the use of electropolymerized metallophthalocyanine films in electroanalysis. In both cases, activation and detection of thiols are the main targeted applications.
- Full Text:
- Authors: Nyokong, Tebello , Bedioui, Fethi
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283851 , vital:55996 , xlink:href="https://doi.org/10.1142/S1088424606000454"
- Description: In this review, we report on the newly developed area of research devoted to the formation of self-assembled monolayers of metallophthalocyanines by focusing on some significant examples dedicated to electroanalytical applications. We also summarize recent examples on the use of electropolymerized metallophthalocyanine films in electroanalysis. In both cases, activation and detection of thiols are the main targeted applications.
- Full Text:
Synthesis and electrochemical characterisation of benzylmercapto and dodecylmercapto tetra substituted cobalt, iron, and zinc phthalocyanines complexes
- Nyokong, Tebello, Ozoemena, Kenneth I, Agboola, Bolade O
- Authors: Nyokong, Tebello , Ozoemena, Kenneth I , Agboola, Bolade O
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6580 , http://hdl.handle.net/10962/d1004143
- Description: The work reports on cyclic voltammetry (CV), square wave voltammetry and spectroelectrochemistry of the following complexes: tetrakis (benzyl mercapto) phthalocyanine complexes of Zn(II) (ZnTBMPc, 4a ), Co(II) (CoTBMPc, 5a ), Fe(II) (FeTBMPc 6a ); and tetrakis (dodecylmercapto) phthalocyanine complexes of Zn(II) (ZnTDMPc, 4b), Co(II) (CoTDMPc, 5b) and Fe(II) (FeTDMPc, 6b). More reversible CV couples were observed for complexes 4a, 5a and 6a containing thiol phenyl ring substituents. Complexes 4b, 5b and 6b containing long chain thiol substituents showed less reversible couples. Complexes 6a and 6b showed a relatively large number of redox processes (5 for 6a and 6 for 6b) within the potential window employed in this work. The processes for FePc derivatives (6a) are assigned to FeIIIPc-1/FeIIIPc-2, FeIIIPc-2/FeIIPc-2, FeIIPc-2/FeIPc-2, FeIPc-2/FeIPc-3 and FeIPc-3/FeIPc-4 and for the CoPc derivative (5a) to CoIIIPc-1/CoIIIPc-2, CoIIIPc-2/CoIIPc-2, CoIIPc-2/CoIPc-2 and CoIPc-2/CoIPc-3.
- Full Text:
- Authors: Nyokong, Tebello , Ozoemena, Kenneth I , Agboola, Bolade O
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6580 , http://hdl.handle.net/10962/d1004143
- Description: The work reports on cyclic voltammetry (CV), square wave voltammetry and spectroelectrochemistry of the following complexes: tetrakis (benzyl mercapto) phthalocyanine complexes of Zn(II) (ZnTBMPc, 4a ), Co(II) (CoTBMPc, 5a ), Fe(II) (FeTBMPc 6a ); and tetrakis (dodecylmercapto) phthalocyanine complexes of Zn(II) (ZnTDMPc, 4b), Co(II) (CoTDMPc, 5b) and Fe(II) (FeTDMPc, 6b). More reversible CV couples were observed for complexes 4a, 5a and 6a containing thiol phenyl ring substituents. Complexes 4b, 5b and 6b containing long chain thiol substituents showed less reversible couples. Complexes 6a and 6b showed a relatively large number of redox processes (5 for 6a and 6 for 6b) within the potential window employed in this work. The processes for FePc derivatives (6a) are assigned to FeIIIPc-1/FeIIIPc-2, FeIIIPc-2/FeIIPc-2, FeIIPc-2/FeIPc-2, FeIPc-2/FeIPc-3 and FeIPc-3/FeIPc-4 and for the CoPc derivative (5a) to CoIIIPc-1/CoIIIPc-2, CoIIIPc-2/CoIIPc-2, CoIIPc-2/CoIPc-2 and CoIPc-2/CoIPc-3.
- Full Text:
Synthesis and electrochemical characterisation of α-and β-tetra-substituted oxo (phthalocyaninato) titanium (IV) complexes
- Tau, Prudence, Nyokong, Tebello
- Authors: Tau, Prudence , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283869 , vital:55998 , xlink:href="https://doi.org/10.1016/j.poly.2005.11.025"
- Description: The synthesis, spectroscopic and electrochemical characterisation of the following oxotitanium tetra-substituted phthalocyanines are reported: 1,(4)-(tetraphenoxyphthalocyaninato)titanium(IV) oxide (5a); 1,(4)-(tetra-tert-butylphenoxyphthalocyaninato)titanium(IV) oxide (5b); 2,(3)-(tetraphenoxyphthalocyaninato)titanium(IV) oxide (6a) and 2,(3)-(tetra-tert-butylphenoxyphthalocyaninato)titanium(IV) oxide (6b). Complexes 5a and 5b are substituted at the non-peripheral (α) positions, whereas complexes 6a and 6b are substituted at the peripheral (β) positions. Cyclic voltammograms of all four complexes are similar, with three reversible reduction couples and three quasi-reversible to irreversible oxidations. The first two reductions are two-electron processes, confirmed by spectroelectrochemistry to be due to TiIVPc−2/TiIIPc−3 and TiIIPc−2/TiIPc−3 redox processes. Spectroelectrochemistry showed that upon oxidation, the molecule decomposes. Oxidation is expected to occur at the ring. Chronocoulometry confirmed two electron transfer at the first and second reduction steps; and a one electron transfer at the third reduction.
- Full Text:
- Authors: Tau, Prudence , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283869 , vital:55998 , xlink:href="https://doi.org/10.1016/j.poly.2005.11.025"
- Description: The synthesis, spectroscopic and electrochemical characterisation of the following oxotitanium tetra-substituted phthalocyanines are reported: 1,(4)-(tetraphenoxyphthalocyaninato)titanium(IV) oxide (5a); 1,(4)-(tetra-tert-butylphenoxyphthalocyaninato)titanium(IV) oxide (5b); 2,(3)-(tetraphenoxyphthalocyaninato)titanium(IV) oxide (6a) and 2,(3)-(tetra-tert-butylphenoxyphthalocyaninato)titanium(IV) oxide (6b). Complexes 5a and 5b are substituted at the non-peripheral (α) positions, whereas complexes 6a and 6b are substituted at the peripheral (β) positions. Cyclic voltammograms of all four complexes are similar, with three reversible reduction couples and three quasi-reversible to irreversible oxidations. The first two reductions are two-electron processes, confirmed by spectroelectrochemistry to be due to TiIVPc−2/TiIIPc−3 and TiIIPc−2/TiIPc−3 redox processes. Spectroelectrochemistry showed that upon oxidation, the molecule decomposes. Oxidation is expected to occur at the ring. Chronocoulometry confirmed two electron transfer at the first and second reduction steps; and a one electron transfer at the third reduction.
- Full Text:
Synthesis and photophysical properties of octa-substituted phthalocyaninato oxotitanium (IV) derivatives
- Tau, Prudence, Nyokong, Tebello
- Authors: Tau, Prudence , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283881 , vital:55999 , xlink:href="https://doi.org/10.1142/S1088424606000399"
- Description: The synthesis, spectral and photophysical properties including fluorescence quenching of the following octa-substituted oxotitanium phthalocyanines are reported: 2,3,9,10,16,17,23,24-octaphenoxyphthalocyaninato titanium(IV) oxide, 2,3,9,10,16,17,23,24-[octakis(4-t-butylphenoxyphthalocyaninato)]titanium(IV) oxide, 2,3,9,10,16,17,23,24-{octakis[(4-benzyloxy)phenoxy]phthalocyaninato}titanium(IV) oxide and 2,3,9,10,16,17,23,24-octaphenylthiophthalocyaninato titanium(IV) oxide. The complexes are characterized by 1H NMR, IR and UV-vis spectroscopies. Their photophysical properties are presented where moderate fluorescence quantum yields (0.14-0.19) and lifetimes were determined. Varied triplet quantum yields were obtained and the triplet lifetimes (40-100 μs) were short.
- Full Text:
- Authors: Tau, Prudence , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283881 , vital:55999 , xlink:href="https://doi.org/10.1142/S1088424606000399"
- Description: The synthesis, spectral and photophysical properties including fluorescence quenching of the following octa-substituted oxotitanium phthalocyanines are reported: 2,3,9,10,16,17,23,24-octaphenoxyphthalocyaninato titanium(IV) oxide, 2,3,9,10,16,17,23,24-[octakis(4-t-butylphenoxyphthalocyaninato)]titanium(IV) oxide, 2,3,9,10,16,17,23,24-{octakis[(4-benzyloxy)phenoxy]phthalocyaninato}titanium(IV) oxide and 2,3,9,10,16,17,23,24-octaphenylthiophthalocyaninato titanium(IV) oxide. The complexes are characterized by 1H NMR, IR and UV-vis spectroscopies. Their photophysical properties are presented where moderate fluorescence quantum yields (0.14-0.19) and lifetimes were determined. Varied triplet quantum yields were obtained and the triplet lifetimes (40-100 μs) were short.
- Full Text:
Tetracarboxylic acid cobalt phthalocyanine SAM on gold: Potential applications as amperometric sensor for H2O2 and fabrication of glucose biosensor
- Mashazi, Philani N, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6578 , http://hdl.handle.net/10962/d1004141
- Description: This report describes the applications of cobalt tetracarboxylic acid phthalocyanine (CoTCAPc) self-assembled monolayer (SAM) immobilized onto a preformed 2-mercaptoethanol (Au-ME) SAM on gold surface (Au-ME-CoTCAPc SAM) as a potential amperometric sensor for the detection of hydrogen peroxide (H[subscript 2]O[subscript 2]) at neutral pH conditions. The Au-ME-CoTCAPc SAM sensor showed a very fast amperometric response time of approximately 1 s, good linearity at the studied concentration range of up to 5 μM with a coefficient R² = 0.993 and a detection limit of 0.4 μM oxidatively. Also reductively, the sensor exhibited a very fast amperometric response time (~1 s), linearity up to 5 μM with a coefficient R² = 0.986 and a detection limit of 0.2 μM. The cobalt tetracarboxylic acid phthalocyanine self-assembled monolayer was then evaluated as a mediator for glucose oxidase (GOx)-based biosensor. The GOx (enzyme) was immobilized covalently onto Au-ME-CoTCAPc SAM using coupling agents: N-ethyl-N(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS), and the results demonstrated a good catalytic behavior. Kinetic parameters associated with the enzymatic and mediator reactions were estimated using electrochemical versions of Lineweaver–Burk and Hanes equation, and the stability of the sensor was tested. The biosensor (Au-ME-CoTCAPc-GOx SAM) electrode showed good sensitivity (7.5 nA/mM) with a good detection limit of 8.4 μM at 3σ, smaller Michaelis–Menten constant (4.8 mM from Hanes plot) and very fast response time of approximately 5 s.
- Full Text:
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6578 , http://hdl.handle.net/10962/d1004141
- Description: This report describes the applications of cobalt tetracarboxylic acid phthalocyanine (CoTCAPc) self-assembled monolayer (SAM) immobilized onto a preformed 2-mercaptoethanol (Au-ME) SAM on gold surface (Au-ME-CoTCAPc SAM) as a potential amperometric sensor for the detection of hydrogen peroxide (H[subscript 2]O[subscript 2]) at neutral pH conditions. The Au-ME-CoTCAPc SAM sensor showed a very fast amperometric response time of approximately 1 s, good linearity at the studied concentration range of up to 5 μM with a coefficient R² = 0.993 and a detection limit of 0.4 μM oxidatively. Also reductively, the sensor exhibited a very fast amperometric response time (~1 s), linearity up to 5 μM with a coefficient R² = 0.986 and a detection limit of 0.2 μM. The cobalt tetracarboxylic acid phthalocyanine self-assembled monolayer was then evaluated as a mediator for glucose oxidase (GOx)-based biosensor. The GOx (enzyme) was immobilized covalently onto Au-ME-CoTCAPc SAM using coupling agents: N-ethyl-N(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS), and the results demonstrated a good catalytic behavior. Kinetic parameters associated with the enzymatic and mediator reactions were estimated using electrochemical versions of Lineweaver–Burk and Hanes equation, and the stability of the sensor was tested. The biosensor (Au-ME-CoTCAPc-GOx SAM) electrode showed good sensitivity (7.5 nA/mM) with a good detection limit of 8.4 μM at 3σ, smaller Michaelis–Menten constant (4.8 mM from Hanes plot) and very fast response time of approximately 5 s.
- Full Text:
The effect of Ge, Si and Sn phthalocyanine photosensitizers on cell proliferation and viability of human oesophageal carcinoma cells
- Seotsanyana-Mokhosi, Itumeleng, Kresfelder, Tina, Abrahamse, Heidi, Nyokong, Tebello
- Authors: Seotsanyana-Mokhosi, Itumeleng , Kresfelder, Tina , Abrahamse, Heidi , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286115 , vital:56241 , xlink:href="https://doi.org/10.1016/j.jphotobiol.2005.12.004"
- Description: The photodynamic activity of water soluble mixed sulfonated metallophthalocyanines complexes: GePcSmix, SnPcSmix and SiPcSmix on human oesophageal carcinoma (SNO) cells are reported, and compared with the activity of the unmetallated H2PcSmix and of the newly synthesized water soluble adjacently substituted binaphthalo phthalocyanine (complex 3). The alkaline phosphate (ALP) showed damage to the cell membrane in the presence of complex 3 without irradiation. The GePcSmix complex caused a relatively large increase in inflammation and a high intracellular ATP.
- Full Text:
- Authors: Seotsanyana-Mokhosi, Itumeleng , Kresfelder, Tina , Abrahamse, Heidi , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286115 , vital:56241 , xlink:href="https://doi.org/10.1016/j.jphotobiol.2005.12.004"
- Description: The photodynamic activity of water soluble mixed sulfonated metallophthalocyanines complexes: GePcSmix, SnPcSmix and SiPcSmix on human oesophageal carcinoma (SNO) cells are reported, and compared with the activity of the unmetallated H2PcSmix and of the newly synthesized water soluble adjacently substituted binaphthalo phthalocyanine (complex 3). The alkaline phosphate (ALP) showed damage to the cell membrane in the presence of complex 3 without irradiation. The GePcSmix complex caused a relatively large increase in inflammation and a high intracellular ATP.
- Full Text:
Unique electrochemical behavior of tantalum (V) phthalocyanine
- Tau, Prudence, Nyokong, Tebello
- Authors: Tau, Prudence , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286139 , vital:56243 , xlink:href="https://doi.org/10.1142/S1088424606000090"
- Description: The electrochemical and spectroscopic behavior of tantalum(V) phthalocyanine are presented. The NMR spectra is consistent with the lack of symmetry of the complex. Cyclic (CV) and square wave (SWV) voltammetries, and spectroelectrochemistry, were employed in the study of the complex. Two one-electron reductions and a simultaneous 4-electron reduction were observed. Reduction occurs first at the metal to form a Ta(IV) species, followed by ring based processes.
- Full Text:
- Authors: Tau, Prudence , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/286139 , vital:56243 , xlink:href="https://doi.org/10.1142/S1088424606000090"
- Description: The electrochemical and spectroscopic behavior of tantalum(V) phthalocyanine are presented. The NMR spectra is consistent with the lack of symmetry of the complex. Cyclic (CV) and square wave (SWV) voltammetries, and spectroelectrochemistry, were employed in the study of the complex. Two one-electron reductions and a simultaneous 4-electron reduction were observed. Reduction occurs first at the metal to form a Ta(IV) species, followed by ring based processes.
- Full Text: