Facile deposition of gold nanoparticle thin films on semi-permeable cellulose substrate
- Sosibo, Ndabenhle, Mdluli, Phumlani, Mashazi, Philani N, Tshikhudo, Robert, Skepu, Amanda, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Sosibo, Ndabenhle , Mdluli, Phumlani , Mashazi, Philani N , Tshikhudo, Robert , Skepu, Amanda , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242638 , vital:51063 , xlink:href="https://doi.org/10.1016/j.matlet.2012.08.043"
- Description: This study reports the facile method for the deposition of gold nanoparticle thin film onto a monoporous semi-permeable cellulose membrane through the diffusion of borohydride ions leading to the reduction of AuCl4− ions. The synthesis of gold nanoparticle thin film was deposited on one side of the membrane that was exposed to AuCl4− ions while the other side containing a reducing agent remained clear. The gold nanoparticle thin film exhibited a broad surface plasmon resonance (SPR) peak at 529 nm. Various characterization techniques were employed and all demonstrated the presence of gold thin film. The reported method represents a simplistic method for the deposition of gold nanoparticle thin films and various other metal nanoparticles may be deposited following this method.
- Full Text:
- Authors: Sosibo, Ndabenhle , Mdluli, Phumlani , Mashazi, Philani N , Tshikhudo, Robert , Skepu, Amanda , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242638 , vital:51063 , xlink:href="https://doi.org/10.1016/j.matlet.2012.08.043"
- Description: This study reports the facile method for the deposition of gold nanoparticle thin film onto a monoporous semi-permeable cellulose membrane through the diffusion of borohydride ions leading to the reduction of AuCl4− ions. The synthesis of gold nanoparticle thin film was deposited on one side of the membrane that was exposed to AuCl4− ions while the other side containing a reducing agent remained clear. The gold nanoparticle thin film exhibited a broad surface plasmon resonance (SPR) peak at 529 nm. Various characterization techniques were employed and all demonstrated the presence of gold thin film. The reported method represents a simplistic method for the deposition of gold nanoparticle thin films and various other metal nanoparticles may be deposited following this method.
- Full Text:
Synthesis, density functional theory, molecular dynamics and electrochemical studies of 3-thiopheneacetic acid-capped gold nanoparticles
- Sosibo, Ndabenhle M, Mdluli, Phumlane S, Mashazi, Philani N, Dyan, Busiswa, Revaprasadu, Neerish, Nyokong, Tebello, Tshikhudo, Robert T, Skepu, Amanda, Van Der Lingen, Elma
- Authors: Sosibo, Ndabenhle M , Mdluli, Phumlane S , Mashazi, Philani N , Dyan, Busiswa , Revaprasadu, Neerish , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , Van Der Lingen, Elma
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246446 , vital:51477 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.09.057"
- Description: Gold nanoparticles capped with a bifunctional ligand, 3-thiopheneacetic acid (3-TAA) were synthesised by borohydride reduction at room temperature. The transmission electron microscopy (TEM) analysis showed that the particle aggregates and had semi-linear partial linkages that could be attributed to multi-modal binding of the ligand with various gold nanoparticles through the terminal thiolether (–S–) group and oxygen of the carboxylic (–COOH) group. This bimodal interaction led to limited stability of the resultant nanoparticles when tested using highly electrolytic media. To investigate further, density functional theory (DFT) quantum chemical and molecular dynamic calculations were conducted. The energetically favorable binding modes of the ligand to gold nanoparticle surfaces using the Gaussian program were studied. The DFT results showed kinetic stability of Au–3-TAA–Au interactions leading to inter-particle coupling or aggregation. Electrochemical analysis of the resultant nature of the capping agent revealed that 3-thiopheneacetic acid did not form a polymer during the preparation of Au–3-TAA. The cyclic voltammograms of Au–3-TAA nanoparticles coated glassy carbon electrode showed a typical gold character with the oxidation and reduction peaks at 1.4 V and 0.9 V, respectively.
- Full Text:
- Authors: Sosibo, Ndabenhle M , Mdluli, Phumlane S , Mashazi, Philani N , Dyan, Busiswa , Revaprasadu, Neerish , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , Van Der Lingen, Elma
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246446 , vital:51477 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.09.057"
- Description: Gold nanoparticles capped with a bifunctional ligand, 3-thiopheneacetic acid (3-TAA) were synthesised by borohydride reduction at room temperature. The transmission electron microscopy (TEM) analysis showed that the particle aggregates and had semi-linear partial linkages that could be attributed to multi-modal binding of the ligand with various gold nanoparticles through the terminal thiolether (–S–) group and oxygen of the carboxylic (–COOH) group. This bimodal interaction led to limited stability of the resultant nanoparticles when tested using highly electrolytic media. To investigate further, density functional theory (DFT) quantum chemical and molecular dynamic calculations were conducted. The energetically favorable binding modes of the ligand to gold nanoparticle surfaces using the Gaussian program were studied. The DFT results showed kinetic stability of Au–3-TAA–Au interactions leading to inter-particle coupling or aggregation. Electrochemical analysis of the resultant nature of the capping agent revealed that 3-thiopheneacetic acid did not form a polymer during the preparation of Au–3-TAA. The cyclic voltammograms of Au–3-TAA nanoparticles coated glassy carbon electrode showed a typical gold character with the oxidation and reduction peaks at 1.4 V and 0.9 V, respectively.
- Full Text:
Selective adsorption of PVP on the surface of silver nanoparticles
- Mdluli, Phumlani S, Sosibo, Ndabenhle M, Mashazi, Philani N, Nyokong, Tebello, Tshikhudo, Robert T, Skepu, Amanda, van der Lingen, Elma
- Authors: Mdluli, Phumlani S , Sosibo, Ndabenhle M , Mashazi, Philani N , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , van der Lingen, Elma
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247143 , vital:51550 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.07.049"
- Description: The use of surfactants to affect the shape evolution of silver nanoparticles is explored. This allows one to fine-tune the morphological evolution and the optical properties of the metal nanoparticles. Polyvinyl pyrrolidone (PVP) has been used as a surfactant to control the growth of silver nanoparticles at room temperature. In this paper, molecular dynamics simulations were performed to understand regio-selective adsorption of PVP that leads to the preferential growth of silver nanoparticles in dimethylformamide (DMF). The interaction energies between PVP and Ag(1 1 0), Ag(1 0 0) and Ag(1 1 1) crystal planes were calculated and in addition the length density profile of the surfactant on silver surfaces was also examined. Importantly, it has been demonstrated that the length distribution profiles analysis obtained from the molecular dynamics study fully explained the adsorption of PVP on the surface of silver nanoparticles through the carbonyl group of the PVP ring. The application of molecular dynamics simulation technique is important in understanding the evolution of silver nanoparticles and is vital in choosing the right surfactants.
- Full Text:
- Authors: Mdluli, Phumlani S , Sosibo, Ndabenhle M , Mashazi, Philani N , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , van der Lingen, Elma
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247143 , vital:51550 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.07.049"
- Description: The use of surfactants to affect the shape evolution of silver nanoparticles is explored. This allows one to fine-tune the morphological evolution and the optical properties of the metal nanoparticles. Polyvinyl pyrrolidone (PVP) has been used as a surfactant to control the growth of silver nanoparticles at room temperature. In this paper, molecular dynamics simulations were performed to understand regio-selective adsorption of PVP that leads to the preferential growth of silver nanoparticles in dimethylformamide (DMF). The interaction energies between PVP and Ag(1 1 0), Ag(1 0 0) and Ag(1 1 1) crystal planes were calculated and in addition the length density profile of the surfactant on silver surfaces was also examined. Importantly, it has been demonstrated that the length distribution profiles analysis obtained from the molecular dynamics study fully explained the adsorption of PVP on the surface of silver nanoparticles through the carbonyl group of the PVP ring. The application of molecular dynamics simulation technique is important in understanding the evolution of silver nanoparticles and is vital in choosing the right surfactants.
- Full Text:
- «
- ‹
- 1
- ›
- »