Analytical methods for the quantitative determination of oxytocin
- Chaibva, Faith A, Walker, Roderick B
- Authors: Chaibva, Faith A , Walker, Roderick B
- Date: 2010
- Language: English
- Type: Article
- Identifier: vital:6353 , http://hdl.handle.net/10962/d1006037
- Description: Oxytocin is a clinically important nonapeptide that is used for the induction and/or augmentation of labor and is normally administered as a slow intravenous infusion diluted with normal saline or Ringer’s lactate solution. Oxytocin is also indicated for use in the prevention and treatment of post partum hemorrhage and may be administered via either the intramuscular or intravenous routes in order to increase uterine tone and/or reduce bleeding. The analysis of oxytocin in different media has evolved over the past 30 years with the result that more sophisticated, selective and sensitive techniques are used for the determination of the compound. A variety of techniques have been applied to the determination of oxytocin in different matrices ranging from simple paper chromatography to hyphenated liquid chromatographic such as liquid chromatography coupled with mass-spectrometry. Additionally enzyme linked immuno-sorbent assays (ELISA) and radio immuno-assays (RIA) are used for the determination of low concentrations of oxytocin in biological matrices. This manuscript provides a systematic survey of the analytical methods that have been reported for isolation and quantitation of oxytocin in different matrices.
- Full Text:
- Date Issued: 2010
- Authors: Chaibva, Faith A , Walker, Roderick B
- Date: 2010
- Language: English
- Type: Article
- Identifier: vital:6353 , http://hdl.handle.net/10962/d1006037
- Description: Oxytocin is a clinically important nonapeptide that is used for the induction and/or augmentation of labor and is normally administered as a slow intravenous infusion diluted with normal saline or Ringer’s lactate solution. Oxytocin is also indicated for use in the prevention and treatment of post partum hemorrhage and may be administered via either the intramuscular or intravenous routes in order to increase uterine tone and/or reduce bleeding. The analysis of oxytocin in different media has evolved over the past 30 years with the result that more sophisticated, selective and sensitive techniques are used for the determination of the compound. A variety of techniques have been applied to the determination of oxytocin in different matrices ranging from simple paper chromatography to hyphenated liquid chromatographic such as liquid chromatography coupled with mass-spectrometry. Additionally enzyme linked immuno-sorbent assays (ELISA) and radio immuno-assays (RIA) are used for the determination of low concentrations of oxytocin in biological matrices. This manuscript provides a systematic survey of the analytical methods that have been reported for isolation and quantitation of oxytocin in different matrices.
- Full Text:
- Date Issued: 2010
Development of a stability-indicating high performance liquid chromatographic method for the analysis of topiramate and dissolution rate testing in topiramate tablets
- Mohammadi, Ali, Rezanour, Nasrin, Ansari Dogaheh, M, Walker, Roderick B
- Authors: Mohammadi, Ali , Rezanour, Nasrin , Ansari Dogaheh, M , Walker, Roderick B
- Date: 2010
- Language: English
- Type: text , Article
- Identifier: vital:6412 , http://hdl.handle.net/10962/d1006507
- Description: A stability-indicating high performance liquid chromatographic(HPLC) method was developed and validated for the quantitation and dissolution determination of topiramate in tablet dosage forms. An isocratic separation was achieved using a phenyl column with a flow rate of 1 mL/min using UV detection at 264 nm. Topiramate has low UV absorbtivity and was subjected to derivatization with 9-fluorenylmethyl chloroformate (FMOC-Cl). The mobile phase for the separation consisted of acetonitrile: 50 mM sodium dihydrogen phosphate(NaH2PO4) containing 3 % v/v triethylamine (pH 2.8) in a 48:52 v/v ratio. Topiramate was subjected to oxidation, hydrolysis, photolysis and heat for the purposes of stress testing. Separation was achieved for the parent compound and all the degradation products in an overall analytical run time of approximately 15 min with the parent compound topiramate eluting at approximately 9.2 min. The method was linear over the concentration range of 1-100 μg/mL (r = 0.9996) with limits of quantitation and detection of 1 and 0.3 μg/mL, respectively.
- Full Text:
- Date Issued: 2010
- Authors: Mohammadi, Ali , Rezanour, Nasrin , Ansari Dogaheh, M , Walker, Roderick B
- Date: 2010
- Language: English
- Type: text , Article
- Identifier: vital:6412 , http://hdl.handle.net/10962/d1006507
- Description: A stability-indicating high performance liquid chromatographic(HPLC) method was developed and validated for the quantitation and dissolution determination of topiramate in tablet dosage forms. An isocratic separation was achieved using a phenyl column with a flow rate of 1 mL/min using UV detection at 264 nm. Topiramate has low UV absorbtivity and was subjected to derivatization with 9-fluorenylmethyl chloroformate (FMOC-Cl). The mobile phase for the separation consisted of acetonitrile: 50 mM sodium dihydrogen phosphate(NaH2PO4) containing 3 % v/v triethylamine (pH 2.8) in a 48:52 v/v ratio. Topiramate was subjected to oxidation, hydrolysis, photolysis and heat for the purposes of stress testing. Separation was achieved for the parent compound and all the degradation products in an overall analytical run time of approximately 15 min with the parent compound topiramate eluting at approximately 9.2 min. The method was linear over the concentration range of 1-100 μg/mL (r = 0.9996) with limits of quantitation and detection of 1 and 0.3 μg/mL, respectively.
- Full Text:
- Date Issued: 2010
Optimization of salbutamol sulfate dissolution from sustained release matrix formulations using an artificial neural network
- Chaibva, Faith A, Burton, Michael H, Walker, Roderick B
- Authors: Chaibva, Faith A , Burton, Michael H , Walker, Roderick B
- Date: 2010
- Subjects: Neural networks (Computer science)
- Language: English
- Type: Article
- Identifier: vital:6352 , http://hdl.handle.net/10962/d1006034
- Description: An artificial neural network was used to optimize the release of salbutamol sulfate from hydrophilic matrix formulations. Model formulations to be used for training, testing and validating the neural network were manufactured with the aid of a central composite design with varying the levels of Methocel® K100M, xanthan gum, Carbopol® 974P and Surelease® as the input factors. In vitro dissolution time profiles at six different sampling times were used as target data in training the neural network for formulation optimization. A multi layer perceptron with one hidden layer was constructed using Matlab®, and the number of nodes in the hidden layer was optimized by trial and error to develop a model with the best predictive ability. The results revealed that a neural network with nine nodes was optimal for developing and optimizing formulations. Simulations undertaken with the training data revealed that the constructed model was useable. The optimized neural network was used for optimization of formulation with desirable release characteristics and the results indicated that there was agreement between the predicted formulation and the manufactured formulation. This work illustrates the possible utility of artificial neural networks for the optimization of pharmaceutical formulations with desirable performance characteristics.
- Full Text:
- Date Issued: 2010
- Authors: Chaibva, Faith A , Burton, Michael H , Walker, Roderick B
- Date: 2010
- Subjects: Neural networks (Computer science)
- Language: English
- Type: Article
- Identifier: vital:6352 , http://hdl.handle.net/10962/d1006034
- Description: An artificial neural network was used to optimize the release of salbutamol sulfate from hydrophilic matrix formulations. Model formulations to be used for training, testing and validating the neural network were manufactured with the aid of a central composite design with varying the levels of Methocel® K100M, xanthan gum, Carbopol® 974P and Surelease® as the input factors. In vitro dissolution time profiles at six different sampling times were used as target data in training the neural network for formulation optimization. A multi layer perceptron with one hidden layer was constructed using Matlab®, and the number of nodes in the hidden layer was optimized by trial and error to develop a model with the best predictive ability. The results revealed that a neural network with nine nodes was optimal for developing and optimizing formulations. Simulations undertaken with the training data revealed that the constructed model was useable. The optimized neural network was used for optimization of formulation with desirable release characteristics and the results indicated that there was agreement between the predicted formulation and the manufactured formulation. This work illustrates the possible utility of artificial neural networks for the optimization of pharmaceutical formulations with desirable performance characteristics.
- Full Text:
- Date Issued: 2010
Simultaneous determination of irinotecan hydrochloride and its related compounds by high performance liquid chromatography using ultraviolet detection
- Mohammadi, Ali, Esmaeili, Farnaz, Dinarvand, Rassoul, Atyabi, Fatemeh, Walker, Roderick B
- Authors: Mohammadi, Ali , Esmaeili, Farnaz , Dinarvand, Rassoul , Atyabi, Fatemeh , Walker, Roderick B
- Date: 2010
- Language: English
- Type: Article
- Identifier: vital:6413 , http://hdl.handle.net/10962/d1006508
- Description: A new simple, precise and accurate high performance liquid chromatography (HPLC) method was developed and validated for the simultaneous determination of irinotecan (CPT-11) and two related compounds viz., 7-ethyl-10 hydroxycamptothecin (SN-38) and camptothecin (CPT) in pharmaceutical dosage forms. Chromatography was accomplished using a reversed-phase C18 column and ultraviolet (UV)detection and an isocratic mobile phase consisting of 3 % v/v triethylammonium acetate buffer (pH 3) and acetonitrile (70:30 v/v). The linear range of quantitation for all the compounds was 0.1-10 μg/mL. The limit of quantitation for all the compounds ranged between 0.01-0.05 μg/mL. The method has the requisite accuracy, selectivity, sensitivity and precision to assay of CPT-11 and related compounds in pharmaceutical dosage forms and bulk API.
- Full Text:
- Date Issued: 2010
- Authors: Mohammadi, Ali , Esmaeili, Farnaz , Dinarvand, Rassoul , Atyabi, Fatemeh , Walker, Roderick B
- Date: 2010
- Language: English
- Type: Article
- Identifier: vital:6413 , http://hdl.handle.net/10962/d1006508
- Description: A new simple, precise and accurate high performance liquid chromatography (HPLC) method was developed and validated for the simultaneous determination of irinotecan (CPT-11) and two related compounds viz., 7-ethyl-10 hydroxycamptothecin (SN-38) and camptothecin (CPT) in pharmaceutical dosage forms. Chromatography was accomplished using a reversed-phase C18 column and ultraviolet (UV)detection and an isocratic mobile phase consisting of 3 % v/v triethylammonium acetate buffer (pH 3) and acetonitrile (70:30 v/v). The linear range of quantitation for all the compounds was 0.1-10 μg/mL. The limit of quantitation for all the compounds ranged between 0.01-0.05 μg/mL. The method has the requisite accuracy, selectivity, sensitivity and precision to assay of CPT-11 and related compounds in pharmaceutical dosage forms and bulk API.
- Full Text:
- Date Issued: 2010
Swelling, erosion and drug release characteristics of salbutamol sulfate from hydroxypropyl methylcellulose-based matrix tablets
- Chaibva, Faith A, Khamanga, Sandile M, Walker, Roderick B
- Authors: Chaibva, Faith A , Khamanga, Sandile M , Walker, Roderick B
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184139 , vital:44177 , xlink:href="https://doi.org/10.3109/03639045.2010.488648"
- Description: Background: Hydrophilic matrix formulations are important and simple technologies that are used to manufacture sustained release dosage forms. Method: Hydroxypropyl methylcellulose-based matrix tablets, with and without additives, were manufactured to investigate the rate of hydration, rate of erosion, and rate and mechanism of drug release. Scanning electron microscopy was used to assess changes in the microstructure of the tablets during drug release testing and whether these changes could be related to the rate of drug release from the formulations. Results: The results revealed that the rate of hydration and erosion was dependent on the polymer combination(s) used, which in turn affected the rate and mechanism of drug release from these formulations. It was also apparent that changes in the microstructure of matrix tablets could be related to the different rates of drug release that were observed from the test formulations. Conclusion: The use of scanning electron microscopy provides useful information to further understand drug release mechanisms from matrix tablets.
- Full Text:
- Date Issued: 2010
- Authors: Chaibva, Faith A , Khamanga, Sandile M , Walker, Roderick B
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184139 , vital:44177 , xlink:href="https://doi.org/10.3109/03639045.2010.488648"
- Description: Background: Hydrophilic matrix formulations are important and simple technologies that are used to manufacture sustained release dosage forms. Method: Hydroxypropyl methylcellulose-based matrix tablets, with and without additives, were manufactured to investigate the rate of hydration, rate of erosion, and rate and mechanism of drug release. Scanning electron microscopy was used to assess changes in the microstructure of the tablets during drug release testing and whether these changes could be related to the rate of drug release from the formulations. Results: The results revealed that the rate of hydration and erosion was dependent on the polymer combination(s) used, which in turn affected the rate and mechanism of drug release from these formulations. It was also apparent that changes in the microstructure of matrix tablets could be related to the different rates of drug release that were observed from the test formulations. Conclusion: The use of scanning electron microscopy provides useful information to further understand drug release mechanisms from matrix tablets.
- Full Text:
- Date Issued: 2010
The determination of acetaminophen using a carbon nanotube: graphite-based electrode
- Moghaddam, Abdolmajid B, Mohammadi, Ali, Mohammadi, Somaye, Rayeji, Danyal, Dinarvand, Rassoul, Baghi, Mansoureh, Walker, Roderick B
- Authors: Moghaddam, Abdolmajid B , Mohammadi, Ali , Mohammadi, Somaye , Rayeji, Danyal , Dinarvand, Rassoul , Baghi, Mansoureh , Walker, Roderick B
- Date: 2010
- Language: English
- Type: Article , text
- Identifier: vital:6414 , http://hdl.handle.net/10962/d1006509
- Description: The oxidation of acetaminophen was studied at a glassy carbon electrode modified with multi-walled carbon nanotubes and a graphite paste. Cyclic voltammety, differential pulse voltammetry and square wave voltammetry at various pH values, scan rates, and the effect of the ratio of nanotubes to graphite were investigated in order to optimize the parameters for the determination of acetaminophen. Square wave voltammetry is the most appropriate technique in giving a characteristic peak at 0.52 V at pH 5. The porous nanostructure of the electrode improves the surface area which results in an increase in the peak current. The voltammetric response is linear in the range between 75 and 2000 ng.mL−1, with standard deviations between 0.25 and 7.8%, and a limit of detection of 25 ng.mL−1. The method has been successfully applied to the analysis of acetaminophen in tablets and biological fluids.
- Full Text:
- Date Issued: 2010
- Authors: Moghaddam, Abdolmajid B , Mohammadi, Ali , Mohammadi, Somaye , Rayeji, Danyal , Dinarvand, Rassoul , Baghi, Mansoureh , Walker, Roderick B
- Date: 2010
- Language: English
- Type: Article , text
- Identifier: vital:6414 , http://hdl.handle.net/10962/d1006509
- Description: The oxidation of acetaminophen was studied at a glassy carbon electrode modified with multi-walled carbon nanotubes and a graphite paste. Cyclic voltammety, differential pulse voltammetry and square wave voltammetry at various pH values, scan rates, and the effect of the ratio of nanotubes to graphite were investigated in order to optimize the parameters for the determination of acetaminophen. Square wave voltammetry is the most appropriate technique in giving a characteristic peak at 0.52 V at pH 5. The porous nanostructure of the electrode improves the surface area which results in an increase in the peak current. The voltammetric response is linear in the range between 75 and 2000 ng.mL−1, with standard deviations between 0.25 and 7.8%, and a limit of detection of 25 ng.mL−1. The method has been successfully applied to the analysis of acetaminophen in tablets and biological fluids.
- Full Text:
- Date Issued: 2010
- «
- ‹
- 1
- ›
- »