In vitro dissolution kinetics of Captopril from microspheres manufactured by solvent evaporation
- Khamanga, Sandile M, Walker, Roderick B
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6390 , http://hdl.handle.net/10962/d1006311
- Description: The aim of this study was to develop and assess captopril-loaded microspheres in which Methocel and Eudragit RS were used as release-controlling factors and to evaluate captopril (CPT) release using kinetic models. Drug-excipient interactions were evaluated using infrared studies, and the physical appearance was characterized using scanning electron microscopy (SEM). A burst effect was observed during the first stage of dissolution for most batches of microspheres. SEM results reveal that this may be attributed to dissolution of captopril crystals that were present on the surface, embedded in the superficial layer of the matrix materials, trapped near the surface of the microspheres, or that may have diffused rapidly through the porous surface of the capsules. The release data generated during in vitro release studies were fitted to zero-order, first-order, Higuchi, Korsmeyer–Peppas, Kopcha, and Makoid–Banakar models. The release kinetics of captopril from most formulations followed a classical Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores located in the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed a predominance of diffusion relative to swelling or erosion throughout the entire test period. The drug release mechanism was also confirmed by the Makoid–Banakar and Korsmeyer–Peppas model exponents. This further supports a diffusion–release mechanism for most formulations. The models postulate that the total drug released is a summation of several mechanisms (viz., burst release, relaxation-induced controlled release, and diffusional release). These results also support the potential application of Eudragit/Methocel microspheres as a suitable sustained-release drug delivery system for captopril.
- Full Text:
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6390 , http://hdl.handle.net/10962/d1006311
- Description: The aim of this study was to develop and assess captopril-loaded microspheres in which Methocel and Eudragit RS were used as release-controlling factors and to evaluate captopril (CPT) release using kinetic models. Drug-excipient interactions were evaluated using infrared studies, and the physical appearance was characterized using scanning electron microscopy (SEM). A burst effect was observed during the first stage of dissolution for most batches of microspheres. SEM results reveal that this may be attributed to dissolution of captopril crystals that were present on the surface, embedded in the superficial layer of the matrix materials, trapped near the surface of the microspheres, or that may have diffused rapidly through the porous surface of the capsules. The release data generated during in vitro release studies were fitted to zero-order, first-order, Higuchi, Korsmeyer–Peppas, Kopcha, and Makoid–Banakar models. The release kinetics of captopril from most formulations followed a classical Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores located in the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed a predominance of diffusion relative to swelling or erosion throughout the entire test period. The drug release mechanism was also confirmed by the Makoid–Banakar and Korsmeyer–Peppas model exponents. This further supports a diffusion–release mechanism for most formulations. The models postulate that the total drug released is a summation of several mechanisms (viz., burst release, relaxation-induced controlled release, and diffusional release). These results also support the potential application of Eudragit/Methocel microspheres as a suitable sustained-release drug delivery system for captopril.
- Full Text:
Syntheses, protonation constants and antimicrobial activity of 2-substituted N-alkylimidazole derivatives
- Kleyi, Phumelele, Walmsley, Ryan S, Gundhla, Isaac Z, Walmsley, Tara A, Jauka, Tembisa I, Dames, Joanna F, Walker, Roderick B, Torto, Nelson, Tshentu, Zenixole R
- Authors: Kleyi, Phumelele , Walmsley, Ryan S , Gundhla, Isaac Z , Walmsley, Tara A , Jauka, Tembisa I , Dames, Joanna F , Walker, Roderick B , Torto, Nelson , Tshentu, Zenixole R
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184066 , vital:44165 , xlink:href="https://www.ajol.info/index.php/sajc/article/view/123858"
- Description: A series of N-alkylimidazole-2-carboxylic acid, N-alkylimidazole-2-carboxaldehyde and N-alkylimidazole-2-methanol derivatives [alkyl = benzyl, methyl, ethyl, propyl, butyl, heptyl, octyl and decyl] have been synthesized and the protonation constants determined. The antimicrobial properties of the compounds were tested against Gram-negative (Escherichi coli), Gram-positive (Staphylococcus aureus and Bacillus subtilis subsp. spizizenii) bacterial strains and yeast (C. albicans). Both the disk diffusion and broth microdilution methods for testing the antimicrobial activity showed that N-alkylation of imidazole with longer alkyl chains and the substitution with low pKa group at 2-position resulted in enhanced antimicrobial activity. Particularly, the N-alkylimidazole-2-carboxylic acids exhibited the best antimicrobial activity due to the low pKa of the carboxylic acid moiety. Generally, all the N-alkylimidazole derivatives were most active against the Gram-positive bacteria [S. aureus (MIC = 5–160 µg mL–1) and B. subtilis subsp. spizizenii (5–20 µg mL–1)], with the latter more susceptible. All the compounds showed poor antimicrobial activity against both Gram-negative (E. coli, MIC = 0.15 to >2500 µg mL–1) bacteria and all the compounds were inactive against the yeast (Candida albicans).
- Full Text:
- Authors: Kleyi, Phumelele , Walmsley, Ryan S , Gundhla, Isaac Z , Walmsley, Tara A , Jauka, Tembisa I , Dames, Joanna F , Walker, Roderick B , Torto, Nelson , Tshentu, Zenixole R
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184066 , vital:44165 , xlink:href="https://www.ajol.info/index.php/sajc/article/view/123858"
- Description: A series of N-alkylimidazole-2-carboxylic acid, N-alkylimidazole-2-carboxaldehyde and N-alkylimidazole-2-methanol derivatives [alkyl = benzyl, methyl, ethyl, propyl, butyl, heptyl, octyl and decyl] have been synthesized and the protonation constants determined. The antimicrobial properties of the compounds were tested against Gram-negative (Escherichi coli), Gram-positive (Staphylococcus aureus and Bacillus subtilis subsp. spizizenii) bacterial strains and yeast (C. albicans). Both the disk diffusion and broth microdilution methods for testing the antimicrobial activity showed that N-alkylation of imidazole with longer alkyl chains and the substitution with low pKa group at 2-position resulted in enhanced antimicrobial activity. Particularly, the N-alkylimidazole-2-carboxylic acids exhibited the best antimicrobial activity due to the low pKa of the carboxylic acid moiety. Generally, all the N-alkylimidazole derivatives were most active against the Gram-positive bacteria [S. aureus (MIC = 5–160 µg mL–1) and B. subtilis subsp. spizizenii (5–20 µg mL–1)], with the latter more susceptible. All the compounds showed poor antimicrobial activity against both Gram-negative (E. coli, MIC = 0.15 to >2500 µg mL–1) bacteria and all the compounds were inactive against the yeast (Candida albicans).
- Full Text:
The use of hot and cold high pressure homogenization to enhance the loading capacity and encapsulation efficiency of nanostructured lipid carriers for the hydrophilic antiretroviral drug, didanosine for potential administration to paediatric patients
- Kasongo, Kasongo W, Müller, Rainer H, Walker, Roderick B
- Authors: Kasongo, Kasongo W , Müller, Rainer H , Walker, Roderick B
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184087 , vital:44170 , xlink:href="https://doi.org/10.3109/10837450.2010.542163"
- Description: A major obstacle to the application of nanostructured lipid carriers (NLCs) as carriers for hydrophilic drugs is the limited loading capacity (LC) and encapsulation efficiency (EE) of NLCs for these molecules. The purpose of this research was to design and implement a strategy to enhance the LC and EE of NLCs for the hydrophilic drug, didanosine (DDI). DDI was dispersed in Transcutol® HP and the particle size of DDI in the liquid lipid was reduced gradually using hot high pressure homogenization (HPH). The product obtained thereafter was added to Precirol® ATO 5 and the hot mixture was immediately dried using liquid nitrogen. The dried materials were then ground and passed through a 200 μm sieve and the solid lipid particles were dispersed in a surfactant solution and subsequently used to manufacture DDI-loaded NLCs using cold HPH. The LC and EE of NLCs for DDI manufactured using the new strategy were 3.39 ± 0.63% and 51.58 ± 1.31%, respectively, compared to 0.079 ± 0.001% and 32.45 ± 0.08%, respectively, obtained when DDI-loaded NLCs were produced using conventional hot HPH. The enhanced LC and EE for DDI make NLCs a potential technology for the oral administration of DDI to paediatric patients.
- Full Text:
- Authors: Kasongo, Kasongo W , Müller, Rainer H , Walker, Roderick B
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184087 , vital:44170 , xlink:href="https://doi.org/10.3109/10837450.2010.542163"
- Description: A major obstacle to the application of nanostructured lipid carriers (NLCs) as carriers for hydrophilic drugs is the limited loading capacity (LC) and encapsulation efficiency (EE) of NLCs for these molecules. The purpose of this research was to design and implement a strategy to enhance the LC and EE of NLCs for the hydrophilic drug, didanosine (DDI). DDI was dispersed in Transcutol® HP and the particle size of DDI in the liquid lipid was reduced gradually using hot high pressure homogenization (HPH). The product obtained thereafter was added to Precirol® ATO 5 and the hot mixture was immediately dried using liquid nitrogen. The dried materials were then ground and passed through a 200 μm sieve and the solid lipid particles were dispersed in a surfactant solution and subsequently used to manufacture DDI-loaded NLCs using cold HPH. The LC and EE of NLCs for DDI manufactured using the new strategy were 3.39 ± 0.63% and 51.58 ± 1.31%, respectively, compared to 0.079 ± 0.001% and 32.45 ± 0.08%, respectively, obtained when DDI-loaded NLCs were produced using conventional hot HPH. The enhanced LC and EE for DDI make NLCs a potential technology for the oral administration of DDI to paediatric patients.
- Full Text:
The use of response surface methodology in the evaluation of captopril microparticles manufactured using an oil in oil solvent evaporation technique
- Khamanga, Sandile M, Walker, Roderick B
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184221 , vital:44191 , xlink:href="https://doi.org/10.3109/02652048.2011.629744"
- Description: Captopril (CPT) microparticles were manufactured by solvent evaporation using acetone (dispersion phase) and liquid paraffin (manufacturing phase) with Eudragit® and Methocel® as coat materials. Design of experiments and response surface methodology (RSM) approaches were used to optimize the process. The microparticles were characterized based on the percent of drug released and yield, microcapsule size, entrapment efficiency and Hausner ratio. Differential scanning calorimetry (DSC), Infrared (IR) spectroscopy, scanning electron microscopy (SEM) and in vitro dissolution studies were conducted. The microcapsules were spherical, free-flowing and IR and DSC thermograms revealed that CPT was stable. The percent drug released was investigated with respect to Eudragit® RS and Methocel® K100M, Methocel® K15M concentrations and homogenizing speed. The optimal conditions for microencapsulation were 1.12 g Eudragit® RS, 0.67 g Methocel® K100M and 0.39 g Methocel® K15M at a homogenizing speed of 1643 rpm and 89% CPT was released. The value of RSM-mediated microencapsulation of CPT was elucidated.
- Full Text:
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184221 , vital:44191 , xlink:href="https://doi.org/10.3109/02652048.2011.629744"
- Description: Captopril (CPT) microparticles were manufactured by solvent evaporation using acetone (dispersion phase) and liquid paraffin (manufacturing phase) with Eudragit® and Methocel® as coat materials. Design of experiments and response surface methodology (RSM) approaches were used to optimize the process. The microparticles were characterized based on the percent of drug released and yield, microcapsule size, entrapment efficiency and Hausner ratio. Differential scanning calorimetry (DSC), Infrared (IR) spectroscopy, scanning electron microscopy (SEM) and in vitro dissolution studies were conducted. The microcapsules were spherical, free-flowing and IR and DSC thermograms revealed that CPT was stable. The percent drug released was investigated with respect to Eudragit® RS and Methocel® K100M, Methocel® K15M concentrations and homogenizing speed. The optimal conditions for microencapsulation were 1.12 g Eudragit® RS, 0.67 g Methocel® K100M and 0.39 g Methocel® K15M at a homogenizing speed of 1643 rpm and 89% CPT was released. The value of RSM-mediated microencapsulation of CPT was elucidated.
- Full Text:
The use of response surface methodology to evaluate the impact of level 2 SUPAC–IR changes on the in vitro release of metronidazole and ranitidine from a fixed-dose combination tablet
- King’ori, Loti D, Walker, Roderick B
- Authors: King’ori, Loti D , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6391 , http://hdl.handle.net/10962/d1006313
- Description: The purpose of this study was to evaluate the effect of different levels of disintegrant (croscarmellose sodium, CCS), binder (polyvinylprrolidone K30, PVP–K30), and lubricant (magnesium stearate) on the in vitro release of metronidazole (MTZ) and rantidine (RTD) from a solid oral fixed-dose combination tablet. The excipient levels investigated were Level 2 changes in component and composition described in the Scale-Up and Post Approval Changes for Immediate Release (SUPAC–IR) guidance (1). Batches of tablets (1000 units) were manufactured by wet granulation using a Saral high-shear mixer granulator and a Manesty B3B rotary tablet press. Weight uniformity, friability, and disintegration of all tablets were assessed, and all batches complied with compendial specifications. The amount of drug released (Q) at ten minutes was dependent on the levels of CCS in the formulation, and the effect of PVP–K30 and magnesium stearate was dependent on the levels of CCS. Synergistic interactions between independent variables were observed for the Q10 value for RTD, whereas PVP–K30 and magnesium stearate exhibited an antagonistic effect on the Q10 values for MTZ and RTD. The use of response surface methodology facilitated an investigation into the effect of Level 2 component and composition changes, as described in SUPAC–IR, on the in vitro release of MTZ and RTD from a fixed-dose combination (FDC) solid oral dosage form (SODF).
- Full Text:
- Authors: King’ori, Loti D , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6391 , http://hdl.handle.net/10962/d1006313
- Description: The purpose of this study was to evaluate the effect of different levels of disintegrant (croscarmellose sodium, CCS), binder (polyvinylprrolidone K30, PVP–K30), and lubricant (magnesium stearate) on the in vitro release of metronidazole (MTZ) and rantidine (RTD) from a solid oral fixed-dose combination tablet. The excipient levels investigated were Level 2 changes in component and composition described in the Scale-Up and Post Approval Changes for Immediate Release (SUPAC–IR) guidance (1). Batches of tablets (1000 units) were manufactured by wet granulation using a Saral high-shear mixer granulator and a Manesty B3B rotary tablet press. Weight uniformity, friability, and disintegration of all tablets were assessed, and all batches complied with compendial specifications. The amount of drug released (Q) at ten minutes was dependent on the levels of CCS in the formulation, and the effect of PVP–K30 and magnesium stearate was dependent on the levels of CCS. Synergistic interactions between independent variables were observed for the Q10 value for RTD, whereas PVP–K30 and magnesium stearate exhibited an antagonistic effect on the Q10 values for MTZ and RTD. The use of response surface methodology facilitated an investigation into the effect of Level 2 component and composition changes, as described in SUPAC–IR, on the in vitro release of MTZ and RTD from a fixed-dose combination (FDC) solid oral dosage form (SODF).
- Full Text:
- «
- ‹
- 1
- ›
- »