Effect of Tenebrio molitor larvae as a protein source on growth performance, carcass yield and meat quality of broiler chickens
- Authors: Mngqi, Sinethemba Census
- Date: 2015
- Subjects: Broilers (Chickens) Chickens -- Feeding and feeds Meat -- Quality
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/2622 , vital:27944
- Description: This study was conducted to assess the effect of including Tenebrio molitor larvae (T. molitor L) as a protein source in different diets on broiler performance, carcass characteristics and meat quality. A total of 144 day-old Cobb-500 chicks were randomly allocated into three treatment groups, each was allocated 16 birds and reared in 9 identical pens. Experimental diets used were as follows: T1 Control (no T. molitor L inclusion); T2 and T3 contained levels of T. molitor L at 5 percent and 10 percent of dry matter (DM) intake, respectively. Body weights (BW), average daily gain (ADG), feed intake (FI), and Feed conversion ratio (FCR) were measured for the 1st experimental chapter. For the second experimental chapter; live weights (LW) of broilers were recorded before slaughter and thereafter carcass weights (CW), meat yield (weights of breast, thigh, drumstick and wing) were recorded. The dressing percentage (DP percent) was also calculated. Breast muscles were sampled for meat pH and colour measurements. The LW of birds from T1 (0 percent T. molitor L) were significantly different (P<0.05) from both T2 (5 percent T. molitor L) and T3 (10 percent T. molitor L) which were similar to each other, with T2 exhibiting the highest live weights (2166g) and the control treatment exhibiting the lowest live weights (2018.3g). In CW, T1 was significantly different (P<0.05) from T2 while it was similar (P>0.05) to T3. The dressing percent of T1 was significantly different (P<0.05) from T2 and T3 which were similar to each other, with T2 having the highest dressing percentage (78, 2 percent) and T1 having the lowest DP percent (66 percent). The breasts in T2 were significantly higher and different (P<0.05) from both T1 and T3 which were similar to each other. The drumsticks in T3 were significantly different (P<0.05) from T1 while they were similar to T2 with values with T2 having highest values. After 45 minutes of slaughter, a significant difference (P<0.05) was observed in L⃰ among all treatments. In redness (a⃰), T3 was significantly different from T1 but was similar to T2 and all treatments in this study exhibited a darker red meat, with T3 muscles exhibiting darker red colour than the other treatments. Similar results were observed in yellowness (b⃰), where the breast muscles from T3 were more yellow than the other treatments. After 24 hours of slaughter, T2 L⃰ values were significantly different (P<0.05) from both T1 and T3 which were similar to each other. It was also found that the broiler chickens given diet with no T. molitor L inclusion (T1) had lower values of BW, FI, ADG and FCR throughout the experiment than those that were in T2 and T3 with 5 percent and 10 percent T. molitor L inclusion levels, respectively. However, it was also found that although broilers with 5 percent T. molitor L inclusion (T2) in their diet had high ABW and ADG than the broilers with 10 percent T. molitor L inclusion (T3), the T3 birds compared favourably to T2 birds as they required low feed intake to reach the same slaughter weight due to high FCR. It was, therefore, concluded that T. molitor L meal can be incorporated into the diets of broilers to produce heavy birds either at 5 or 10 percent. However, although 5 percent T. molitor L inclusion yields heavier carcasses, the 10 percent T. molitor L inclusion compared favourably to 5 percent inclusion since it required low feed intake to reach the same slaughter weights and there were slight differences on meat quality attributes between the two treatments.Thus T. molitor L at 10 percent inclusion levels was the best inclusion level to enhance broiler growth performance, carcass yield, meat yield and meat quality.
- Full Text:
- Date Issued: 2015
- Authors: Mngqi, Sinethemba Census
- Date: 2015
- Subjects: Broilers (Chickens) Chickens -- Feeding and feeds Meat -- Quality
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/2622 , vital:27944
- Description: This study was conducted to assess the effect of including Tenebrio molitor larvae (T. molitor L) as a protein source in different diets on broiler performance, carcass characteristics and meat quality. A total of 144 day-old Cobb-500 chicks were randomly allocated into three treatment groups, each was allocated 16 birds and reared in 9 identical pens. Experimental diets used were as follows: T1 Control (no T. molitor L inclusion); T2 and T3 contained levels of T. molitor L at 5 percent and 10 percent of dry matter (DM) intake, respectively. Body weights (BW), average daily gain (ADG), feed intake (FI), and Feed conversion ratio (FCR) were measured for the 1st experimental chapter. For the second experimental chapter; live weights (LW) of broilers were recorded before slaughter and thereafter carcass weights (CW), meat yield (weights of breast, thigh, drumstick and wing) were recorded. The dressing percentage (DP percent) was also calculated. Breast muscles were sampled for meat pH and colour measurements. The LW of birds from T1 (0 percent T. molitor L) were significantly different (P<0.05) from both T2 (5 percent T. molitor L) and T3 (10 percent T. molitor L) which were similar to each other, with T2 exhibiting the highest live weights (2166g) and the control treatment exhibiting the lowest live weights (2018.3g). In CW, T1 was significantly different (P<0.05) from T2 while it was similar (P>0.05) to T3. The dressing percent of T1 was significantly different (P<0.05) from T2 and T3 which were similar to each other, with T2 having the highest dressing percentage (78, 2 percent) and T1 having the lowest DP percent (66 percent). The breasts in T2 were significantly higher and different (P<0.05) from both T1 and T3 which were similar to each other. The drumsticks in T3 were significantly different (P<0.05) from T1 while they were similar to T2 with values with T2 having highest values. After 45 minutes of slaughter, a significant difference (P<0.05) was observed in L⃰ among all treatments. In redness (a⃰), T3 was significantly different from T1 but was similar to T2 and all treatments in this study exhibited a darker red meat, with T3 muscles exhibiting darker red colour than the other treatments. Similar results were observed in yellowness (b⃰), where the breast muscles from T3 were more yellow than the other treatments. After 24 hours of slaughter, T2 L⃰ values were significantly different (P<0.05) from both T1 and T3 which were similar to each other. It was also found that the broiler chickens given diet with no T. molitor L inclusion (T1) had lower values of BW, FI, ADG and FCR throughout the experiment than those that were in T2 and T3 with 5 percent and 10 percent T. molitor L inclusion levels, respectively. However, it was also found that although broilers with 5 percent T. molitor L inclusion (T2) in their diet had high ABW and ADG than the broilers with 10 percent T. molitor L inclusion (T3), the T3 birds compared favourably to T2 birds as they required low feed intake to reach the same slaughter weight due to high FCR. It was, therefore, concluded that T. molitor L meal can be incorporated into the diets of broilers to produce heavy birds either at 5 or 10 percent. However, although 5 percent T. molitor L inclusion yields heavier carcasses, the 10 percent T. molitor L inclusion compared favourably to 5 percent inclusion since it required low feed intake to reach the same slaughter weights and there were slight differences on meat quality attributes between the two treatments.Thus T. molitor L at 10 percent inclusion levels was the best inclusion level to enhance broiler growth performance, carcass yield, meat yield and meat quality.
- Full Text:
- Date Issued: 2015
Effects of differently shaped silver nanoparticles on the photophysics of pyridylsulfanyl-substituted phthalocyanines
- D'Souza, Sarah, Mashazi, Philani N, Britton, Jonathan, Nyokong, Tebello
- Authors: D'Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193564 , vital:45348 , xlink:href="https://doi.org/10.1016/j.poly.2015.06.038"
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines.
- Full Text:
- Date Issued: 2015
- Authors: D'Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193564 , vital:45348 , xlink:href="https://doi.org/10.1016/j.poly.2015.06.038"
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines.
- Full Text:
- Date Issued: 2015
Effects of inoculating Lachnum and Cadophora isolates on the growth of Vaccinium corymbosum
- Mbizabani, Christine, Dames, Joanna F
- Authors: Mbizabani, Christine , Dames, Joanna F
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/444024 , vital:74179 , https://doi.org/10.1016/j.micres.2015.08.005
- Description: The roots of ericaceous plants harbour a diversity of fungal taxa, which confer eco-physiological benefits to the host. Some of the fungi have been established to form ericoid mycorrhizal (ERM) associations and enhance plant growth in certain ericaceous genera. Although, Lachnum and Cadophora isolates have frequently been identified from the roots of this family, the status of their association and functional roles is still vague. The aims of this study were to identify Lachnum and Cadophora isolates; determine the root-fungal interactive structures formed in associations with Vaccinium corymbosum L. (blueberry) hosts and to examine inoculation effects of the fungal associates using several varieties of the blueberry. Lachnum and Cadophora were isolated and identified from Erica cerinthoides L. and Erica demmissa Klotzsch ex Benth using morphological and molecular techniques. Micropropagated blueberry varieties (Bluecrop, Elliott, Spartan, Chandler and Brightwell) were inoculated with respective fungi and plant growth evaluated. Both fungi colonised the roots and did not have any pathogenic effect.
- Full Text:
- Date Issued: 2015
- Authors: Mbizabani, Christine , Dames, Joanna F
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/444024 , vital:74179 , https://doi.org/10.1016/j.micres.2015.08.005
- Description: The roots of ericaceous plants harbour a diversity of fungal taxa, which confer eco-physiological benefits to the host. Some of the fungi have been established to form ericoid mycorrhizal (ERM) associations and enhance plant growth in certain ericaceous genera. Although, Lachnum and Cadophora isolates have frequently been identified from the roots of this family, the status of their association and functional roles is still vague. The aims of this study were to identify Lachnum and Cadophora isolates; determine the root-fungal interactive structures formed in associations with Vaccinium corymbosum L. (blueberry) hosts and to examine inoculation effects of the fungal associates using several varieties of the blueberry. Lachnum and Cadophora were isolated and identified from Erica cerinthoides L. and Erica demmissa Klotzsch ex Benth using morphological and molecular techniques. Micropropagated blueberry varieties (Bluecrop, Elliott, Spartan, Chandler and Brightwell) were inoculated with respective fungi and plant growth evaluated. Both fungi colonised the roots and did not have any pathogenic effect.
- Full Text:
- Date Issued: 2015
Effects of natural antioxidants and thermal treatment on quality of meat from Bonsmara and non-descripts cattle
- Authors: Falowo, Andrew Bamidele
- Date: 2015
- Subjects: Meat -- Preservation Antioxidants Meat -- Microbiology
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/2589 , vital:27906
- Description: The broad objective of this study was to determine the effects of natural antioxidants and thermal treatment on quality of meat from Bonsmara and non-descript cattle. A survey was conducted among 222 consumers in Alice (Fort Hare University community), Eastern Cape Province to determine the level of their awareness on application of antioxidants as preservatives in meat and meat products during storage. Representative samples of Muscularis longissimuss thoracis et lumborum and liver were collected from each carcass of Bonsmara (n=40) and non-descript (n=40) cattle reared on natural pasture to determine the effect of natural antioxidants and thermal treatment on their quality. The results from the survey revealed that 51.35 percent of the respondents had not heard about the use of antioxidant as preservatives in meat products. However, among the remaining respondents (48.65 percent) that were aware of antioxidant and its use as preservative, about 19 percent knew of natural antioxidants, 35 percent synthetic antioxidants while 46 percent had knowledge of both. The results further revealed that the majority of the respondents (82 percent) that had knowledge of natural antioxidants were concerned about the use of synthetic antioxidants in meat and meat products due to their health consequences. The in vitro antioxidant and antibacterial analyses of Bidens pilosa and Moringa oleifera leaf extracts revealed that they contain rich bioactive compounds. Furthermore, the addition of leaf extracts from Moringa oleifera (ML, 0.05 and 0.1 percent w/w) and Biden pilosa (BP, 0.05 and 0.1 percent w/w) to ground raw beef as a natural antioxidant were found to improve the physicochemical, oxidative stability and microbiological qualities of meat compared to the control (meat without extract) and BHT treatment (0.02 percent w/w) during 6 days storage at 40 C. Cattle breed did not have much effect on colour parameters. However, the overall pH of ground beef treated with extracts showed lower values than control and BHT treated beef. Also, ground beef samples containing extracts exhibited (P < 0.05) better colour stability, especially higher redness (a* values), than the control. The formation of TBARS in beef samples treated with extracts was significantly (P < 0.05) lower than the control and BHT treatment. The antibacterial assay of the extracts revealed an appreciable broad spectrum activity against the tested bacteria and microbial counts in ground beef samples compared to control and BHT group. Ground beef treated with plant extracts exhibited lower microbial and lactic acid bacterial counts (P < 0.05) at day 0 and 3 than control samples. Moreover, it was observed that application of sous vides thermal method did not significantly affect the fatty acids and mineral loss in beef and liver across the treatments. However, the total concentration of MUFA was lower in raw liver (20.11±2.38 - 21.08±1.23 percent) than in beef (40.22±1.90 - 42.53±1.29 percent), while total PUFA content were higher in liver (30.73±2.60 - 31.11±1.19 percent) than in beef samples (10.13±3.36 - 11.02±2.74 percent) (p < 0.05). The results also revealed that liver samples from Bonsmara and non-descript cattle had a higher percentage of intramuscular fat content of 4.67 ± 0.53 percent and 4.44 ± 0.53 percent respectively, and fat free dry matter of 27.51 ± 1.05 percent and 25.73 ± 1.05 percent, respectively, than the beef samples (p < 0.05). The concentrations of Mg (52.80±0.22 - 53.70±0.02mg/100g) and Zn (8.90±0.15 - 19.60±0.15mg/100g) were higher in beef than liver samples. The level of Ca (17.00±0.17 - 17.50 ± 0.17mg/100g) in liver was higher than that of beef samples. It was concluded that most consumers preferred the use of natural antioxidants in meat products than synthetic antioxidants due to their health risk. The effectiveness of M. oleifera and B. pilosa leaf extracts on meat quality also revealed that these plants are promising candidates as natural preservatives and their application should be considered in the meat industry. Lastly, findings from this study showed that application of the sous vide technique could protect meat products from nutritional loss during thermal treatment.
- Full Text:
- Date Issued: 2015
- Authors: Falowo, Andrew Bamidele
- Date: 2015
- Subjects: Meat -- Preservation Antioxidants Meat -- Microbiology
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/2589 , vital:27906
- Description: The broad objective of this study was to determine the effects of natural antioxidants and thermal treatment on quality of meat from Bonsmara and non-descript cattle. A survey was conducted among 222 consumers in Alice (Fort Hare University community), Eastern Cape Province to determine the level of their awareness on application of antioxidants as preservatives in meat and meat products during storage. Representative samples of Muscularis longissimuss thoracis et lumborum and liver were collected from each carcass of Bonsmara (n=40) and non-descript (n=40) cattle reared on natural pasture to determine the effect of natural antioxidants and thermal treatment on their quality. The results from the survey revealed that 51.35 percent of the respondents had not heard about the use of antioxidant as preservatives in meat products. However, among the remaining respondents (48.65 percent) that were aware of antioxidant and its use as preservative, about 19 percent knew of natural antioxidants, 35 percent synthetic antioxidants while 46 percent had knowledge of both. The results further revealed that the majority of the respondents (82 percent) that had knowledge of natural antioxidants were concerned about the use of synthetic antioxidants in meat and meat products due to their health consequences. The in vitro antioxidant and antibacterial analyses of Bidens pilosa and Moringa oleifera leaf extracts revealed that they contain rich bioactive compounds. Furthermore, the addition of leaf extracts from Moringa oleifera (ML, 0.05 and 0.1 percent w/w) and Biden pilosa (BP, 0.05 and 0.1 percent w/w) to ground raw beef as a natural antioxidant were found to improve the physicochemical, oxidative stability and microbiological qualities of meat compared to the control (meat without extract) and BHT treatment (0.02 percent w/w) during 6 days storage at 40 C. Cattle breed did not have much effect on colour parameters. However, the overall pH of ground beef treated with extracts showed lower values than control and BHT treated beef. Also, ground beef samples containing extracts exhibited (P < 0.05) better colour stability, especially higher redness (a* values), than the control. The formation of TBARS in beef samples treated with extracts was significantly (P < 0.05) lower than the control and BHT treatment. The antibacterial assay of the extracts revealed an appreciable broad spectrum activity against the tested bacteria and microbial counts in ground beef samples compared to control and BHT group. Ground beef treated with plant extracts exhibited lower microbial and lactic acid bacterial counts (P < 0.05) at day 0 and 3 than control samples. Moreover, it was observed that application of sous vides thermal method did not significantly affect the fatty acids and mineral loss in beef and liver across the treatments. However, the total concentration of MUFA was lower in raw liver (20.11±2.38 - 21.08±1.23 percent) than in beef (40.22±1.90 - 42.53±1.29 percent), while total PUFA content were higher in liver (30.73±2.60 - 31.11±1.19 percent) than in beef samples (10.13±3.36 - 11.02±2.74 percent) (p < 0.05). The results also revealed that liver samples from Bonsmara and non-descript cattle had a higher percentage of intramuscular fat content of 4.67 ± 0.53 percent and 4.44 ± 0.53 percent respectively, and fat free dry matter of 27.51 ± 1.05 percent and 25.73 ± 1.05 percent, respectively, than the beef samples (p < 0.05). The concentrations of Mg (52.80±0.22 - 53.70±0.02mg/100g) and Zn (8.90±0.15 - 19.60±0.15mg/100g) were higher in beef than liver samples. The level of Ca (17.00±0.17 - 17.50 ± 0.17mg/100g) in liver was higher than that of beef samples. It was concluded that most consumers preferred the use of natural antioxidants in meat products than synthetic antioxidants due to their health risk. The effectiveness of M. oleifera and B. pilosa leaf extracts on meat quality also revealed that these plants are promising candidates as natural preservatives and their application should be considered in the meat industry. Lastly, findings from this study showed that application of the sous vide technique could protect meat products from nutritional loss during thermal treatment.
- Full Text:
- Date Issued: 2015
Effects of political instability in development in South Sudan
- Authors: Annan, David
- Date: 2015
- Subjects: Political stability -- Africa -- History , Economic development -- Political aspects , Africa -- Politics and government
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:9184 , http://hdl.handle.net/10948/d1020190
- Description: The signing of the Comprehensive Peace Agreement (CPA) between the Republic of Sudan represented by the National Congress Party (NCP) and the SPLM (Sudan People’s Liberation Movement) which represented the people of the Southern part of Sudan in January 2005 ushered in a rare era of peace and hope for the rebuilding and construction of the war ravaged South Sudan. Coupled with the attainment of Independence for South Sudan through an internationally supervised referendum in January 2011, the objectives of years of struggle by the people of the formerly semi-autonomous region were completed. From 2005 until after the independence of South Sudan however, a period that initially was marked by huge euphoria and broad based anticipation of development boom, the support from both local and international actors for the struggle and the plight of the people of South Sudan is waning and at worst has now turned into despair and hopelessness. After attaining independence in 2011, the highest party organ, the Political Bureau decided to remove candidates who were popularly voted by their constituents and replaced them with their cronies, leading to mass exodus of cadres from the party. On top of that, the wide believe that the elections were rigged for SPLM candidates at the expense of the Independent candidates led to another wave of exodus and open rebellion by many veteran cadres of the movement. Today, these rebellions coupled with some complex problematic societal issues are major concern and a source of political instability and violence in some parts of the country. Secondly, the hasty process of the Disarmament, Demobilization, and Reintegration (DDR) campaign, which in some cases were forcefully done left some communities exposed and venerable to attacks by rival communities. This continue to exacerbate and ignite tribal hatred, tension and stereotypes between communities especially in the traditionally volatile parts of the country that are known for cattle rustling and tribal rivalry as a form of cultural practice. Unresolved post secession issues within the SPLM had resulted to political instability and violence thus having negative economic consequences for South Sudan and all the gains the country had made in the past few years vanished after December 15 2013 political upheaval. This thesis will examine the effects of these mentioned complex political instability and economic dilemma South Sudan is being confronted with in the face of the fact that it is still in the process of nation building having attained its Independence only in July 2011.
- Full Text:
- Date Issued: 2015
- Authors: Annan, David
- Date: 2015
- Subjects: Political stability -- Africa -- History , Economic development -- Political aspects , Africa -- Politics and government
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:9184 , http://hdl.handle.net/10948/d1020190
- Description: The signing of the Comprehensive Peace Agreement (CPA) between the Republic of Sudan represented by the National Congress Party (NCP) and the SPLM (Sudan People’s Liberation Movement) which represented the people of the Southern part of Sudan in January 2005 ushered in a rare era of peace and hope for the rebuilding and construction of the war ravaged South Sudan. Coupled with the attainment of Independence for South Sudan through an internationally supervised referendum in January 2011, the objectives of years of struggle by the people of the formerly semi-autonomous region were completed. From 2005 until after the independence of South Sudan however, a period that initially was marked by huge euphoria and broad based anticipation of development boom, the support from both local and international actors for the struggle and the plight of the people of South Sudan is waning and at worst has now turned into despair and hopelessness. After attaining independence in 2011, the highest party organ, the Political Bureau decided to remove candidates who were popularly voted by their constituents and replaced them with their cronies, leading to mass exodus of cadres from the party. On top of that, the wide believe that the elections were rigged for SPLM candidates at the expense of the Independent candidates led to another wave of exodus and open rebellion by many veteran cadres of the movement. Today, these rebellions coupled with some complex problematic societal issues are major concern and a source of political instability and violence in some parts of the country. Secondly, the hasty process of the Disarmament, Demobilization, and Reintegration (DDR) campaign, which in some cases were forcefully done left some communities exposed and venerable to attacks by rival communities. This continue to exacerbate and ignite tribal hatred, tension and stereotypes between communities especially in the traditionally volatile parts of the country that are known for cattle rustling and tribal rivalry as a form of cultural practice. Unresolved post secession issues within the SPLM had resulted to political instability and violence thus having negative economic consequences for South Sudan and all the gains the country had made in the past few years vanished after December 15 2013 political upheaval. This thesis will examine the effects of these mentioned complex political instability and economic dilemma South Sudan is being confronted with in the face of the fact that it is still in the process of nation building having attained its Independence only in July 2011.
- Full Text:
- Date Issued: 2015
Effects of ZnO nanohexagons and nanorods on the fluorescence behavior of metallophthalocyanines
- D'Souza, Sarah, Moeno, Sharon, Nyokong, Tebello
- Authors: D'Souza, Sarah , Moeno, Sharon , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189741 , vital:44927 , xlink:href="https://doi.org/10.1016/j.poly.2014.09.012"
- Description: This paper looks at the fluorescence behavior of zinc phthalocyanines: 2,(3),9(10),16(17),23(24)-tetrakis- (mercaptoacetic acid phthalocyaninato) zinc(II) (ZnTMAAPc), 2,(3),9(10),16(17),23(24)-tetrakis-(mercaptopropanoic acid phthalocyaninato) zinc(II) (ZnTMPAPc) and (OH)AlPcSmix (the latter contains a mixture of the di-, tri- and tetra-sulfonated derivatives with an average of three sulfonated groups per molecule) in the presence of ZnO nanoparticles. Fluorescence lifetimes of Pc complexes generally decreased in the presence of ZnO nanoparticles, with generally longer lifetimes for ZnO nanohexagons compared to ZnO nanorods.
- Full Text:
- Date Issued: 2015
- Authors: D'Souza, Sarah , Moeno, Sharon , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189741 , vital:44927 , xlink:href="https://doi.org/10.1016/j.poly.2014.09.012"
- Description: This paper looks at the fluorescence behavior of zinc phthalocyanines: 2,(3),9(10),16(17),23(24)-tetrakis- (mercaptoacetic acid phthalocyaninato) zinc(II) (ZnTMAAPc), 2,(3),9(10),16(17),23(24)-tetrakis-(mercaptopropanoic acid phthalocyaninato) zinc(II) (ZnTMPAPc) and (OH)AlPcSmix (the latter contains a mixture of the di-, tri- and tetra-sulfonated derivatives with an average of three sulfonated groups per molecule) in the presence of ZnO nanoparticles. Fluorescence lifetimes of Pc complexes generally decreased in the presence of ZnO nanoparticles, with generally longer lifetimes for ZnO nanohexagons compared to ZnO nanorods.
- Full Text:
- Date Issued: 2015
Efficiency evaluation of South Africa tertiary education institutions using data envelopment analysis
- Authors: Chitekedza, Ignatious
- Date: 2015
- Subjects: Data envelopment analysis -- South Africa , Principal components analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/4764 , vital:20674
- Description: With an increasing number of students enrolling at higher education institutions in South Africa, it has become important to investigate whether these institutions are using their resources adequately. This study uses data envelopment analysis (DEA) to estimate the efficiency of 23 South African tertiary education institutions based on both teaching and research outputs. Using DEA we are able to rank South African universities according to their use of resources in these two areas. These rankings can identify institutions which are performing well and also those which require improvement. The effect that merging institutions has on this efficiency is also determined. Owing to the limited sample size, variable reduction techniques, including the efficiency contribution measure (ECM) and principal components analysis (PCA-DEA), were used to improve the discrimination of the analysis.
- Full Text:
- Date Issued: 2015
- Authors: Chitekedza, Ignatious
- Date: 2015
- Subjects: Data envelopment analysis -- South Africa , Principal components analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/4764 , vital:20674
- Description: With an increasing number of students enrolling at higher education institutions in South Africa, it has become important to investigate whether these institutions are using their resources adequately. This study uses data envelopment analysis (DEA) to estimate the efficiency of 23 South African tertiary education institutions based on both teaching and research outputs. Using DEA we are able to rank South African universities according to their use of resources in these two areas. These rankings can identify institutions which are performing well and also those which require improvement. The effect that merging institutions has on this efficiency is also determined. Owing to the limited sample size, variable reduction techniques, including the efficiency contribution measure (ECM) and principal components analysis (PCA-DEA), were used to improve the discrimination of the analysis.
- Full Text:
- Date Issued: 2015
Elder mixing traditional drink
- Unnamed
- Authors: Unnamed
- Date: 2015
- Subjects: UNCATALOGUED
- Type: Video
- Identifier: http://hdl.handle.net/10962/303106 , vital:58291 , KHV-253
- Description: Elder mixing traditional drink , Use of this resource is governed by the terms and conditions of the Creative Commons "Attribution-NonCommercial-ShareAlike" License (http://creativecommons.org/licenses/by-nc-sa/2.0/) (NEVER CAHNGE THIS FIELD)
- Full Text: false
- Date Issued: 2015
- Authors: Unnamed
- Date: 2015
- Subjects: UNCATALOGUED
- Type: Video
- Identifier: http://hdl.handle.net/10962/303106 , vital:58291 , KHV-253
- Description: Elder mixing traditional drink , Use of this resource is governed by the terms and conditions of the Creative Commons "Attribution-NonCommercial-ShareAlike" License (http://creativecommons.org/licenses/by-nc-sa/2.0/) (NEVER CAHNGE THIS FIELD)
- Full Text: false
- Date Issued: 2015
Elder speaking
- Unnamed
- Authors: Unnamed
- Date: 2015
- Subjects: UNCATALOGUED
- Type: Video
- Identifier: http://hdl.handle.net/10962/303069 , vital:58287 , KHV-249
- Description: Elder inside the hut outlining details of the event , Use of this resource is governed by the terms and conditions of the Creative Commons "Attribution-NonCommercial-ShareAlike" License (http://creativecommons.org/licenses/by-nc-sa/2.0/) (NEVER CAHNGE THIS FIELD)
- Full Text: false
- Date Issued: 2015
- Authors: Unnamed
- Date: 2015
- Subjects: UNCATALOGUED
- Type: Video
- Identifier: http://hdl.handle.net/10962/303069 , vital:58287 , KHV-249
- Description: Elder inside the hut outlining details of the event , Use of this resource is governed by the terms and conditions of the Creative Commons "Attribution-NonCommercial-ShareAlike" License (http://creativecommons.org/licenses/by-nc-sa/2.0/) (NEVER CAHNGE THIS FIELD)
- Full Text: false
- Date Issued: 2015
Elder speaking inside hut
- Unnamed
- Authors: Unnamed
- Date: 2015
- Subjects: UNCATALOGUED
- Type: Video
- Identifier: http://hdl.handle.net/10962/303054 , vital:58285 , KHV-248
- Description: Elder inside the hut outlining details of the event , Use of this resource is governed by the terms and conditions of the Creative Commons "Attribution-NonCommercial-ShareAlike" License (http://creativecommons.org/licenses/by-nc-sa/2.0/) (NEVER CAHNGE THIS FIELD)
- Full Text: false
- Date Issued: 2015
- Authors: Unnamed
- Date: 2015
- Subjects: UNCATALOGUED
- Type: Video
- Identifier: http://hdl.handle.net/10962/303054 , vital:58285 , KHV-248
- Description: Elder inside the hut outlining details of the event , Use of this resource is governed by the terms and conditions of the Creative Commons "Attribution-NonCommercial-ShareAlike" License (http://creativecommons.org/licenses/by-nc-sa/2.0/) (NEVER CAHNGE THIS FIELD)
- Full Text: false
- Date Issued: 2015
Electrical-static discharge in single point diamond turning machining of contact lens polymers
- Authors: Kadermani, Mohamed Munir
- Date: 2015
- Subjects: Electric discharges , Electrostatics , Contact lenses , Polymers
- Language: English
- Type: Thesis , Masters , MEngineering (Mechatronics)
- Identifier: http://hdl.handle.net/10948/4055 , vital:20508
- Description: Single Point Diamond Turning (SPDT) is a technology widely applied for the fabrication of contact lenses. One of the limiting factors in polymer machining is wear of the diamond tool due to electrostatic discharge resulting in poor surface quality of the machined products. The research work presented in this dissertation highlights the electrostatic properties of contact lenses during machining operations and the effects these properties have on the surface quality of the work piece materials. Two contact lens samples were experimented on, Definitive 74 (Silicone Hydrogel) and Tyro 97 (Rigid Gas Permeable). The electrostatic surface potentials (ESPs) were measured during turning operations using an electrostatic voltmeter and the surface roughness measurements were taken using a surface profilometer. Response Surface Methodology (RSM) techniques were employed to create predictive models for both surface roughness and ESPs with respect to the cutting speed, feed rate and depth of cut. Predictive surface roughness models were successfully generated for both materials and the cutting speed and feed rate were identified as the parameters with most effect on surface roughness. In addition, an electrostatic model was successfully generated for the Definitive 74 contact lens material which cited the cutting speed and feed rate as the most effective parameters on the material’s electrostatic behaviour. However, no relationship was evident between the machining parameters and electrostatic behaviour of Tyro 97.
- Full Text:
- Date Issued: 2015
- Authors: Kadermani, Mohamed Munir
- Date: 2015
- Subjects: Electric discharges , Electrostatics , Contact lenses , Polymers
- Language: English
- Type: Thesis , Masters , MEngineering (Mechatronics)
- Identifier: http://hdl.handle.net/10948/4055 , vital:20508
- Description: Single Point Diamond Turning (SPDT) is a technology widely applied for the fabrication of contact lenses. One of the limiting factors in polymer machining is wear of the diamond tool due to electrostatic discharge resulting in poor surface quality of the machined products. The research work presented in this dissertation highlights the electrostatic properties of contact lenses during machining operations and the effects these properties have on the surface quality of the work piece materials. Two contact lens samples were experimented on, Definitive 74 (Silicone Hydrogel) and Tyro 97 (Rigid Gas Permeable). The electrostatic surface potentials (ESPs) were measured during turning operations using an electrostatic voltmeter and the surface roughness measurements were taken using a surface profilometer. Response Surface Methodology (RSM) techniques were employed to create predictive models for both surface roughness and ESPs with respect to the cutting speed, feed rate and depth of cut. Predictive surface roughness models were successfully generated for both materials and the cutting speed and feed rate were identified as the parameters with most effect on surface roughness. In addition, an electrostatic model was successfully generated for the Definitive 74 contact lens material which cited the cutting speed and feed rate as the most effective parameters on the material’s electrostatic behaviour. However, no relationship was evident between the machining parameters and electrostatic behaviour of Tyro 97.
- Full Text:
- Date Issued: 2015
Electrocatalytic activity of bimetallic Au–Pd nanoparticles in the presence of cobalt tetraaminophthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189719 , vital:44925 , xlink:href="https://doi.org/10.1016/j.jcis.2014.10.056"
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 lA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 lA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 lM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2015
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189719 , vital:44925 , xlink:href="https://doi.org/10.1016/j.jcis.2014.10.056"
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 lA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 lA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 lM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2015
Electrocatalytic studies of covalently immobilized metal tetra-amino phthalocyanines onto derivatized screen-printed gold electrodes
- Mashazi, Philani N, Nyokong, Tebello
- Authors: Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/249059 , vital:51774 , xlink:href="https://doi.org/10.1007/s00604-010-0438-6"
- Description: Metal tetra-amino phthalocyanine complexes (MTAPc; where M is Co or Mn) were immobilized on screen-printed gold electrodes pre-modified with monolayers of benzylamino groups. The functionalized electrodes were then activated using benzene-1,4-dicarbaldehyde as a linker before MTAPc complexes were immobilized. The surface coverages for the modified electrodes confirmed the perpendicular orientation of the MTAPcs. The apparent electron transfer constant (kapp) for the electrodes is 2.2 × 10−5 cm.s−1 for both CoTAPc and MnTAPc modified electrodes as calculated with data from impedance measurements. The kapp values for the bare and benzylamino modified electrodes were found to be 1.2 × 10−4 cm.s−1 and 4.9 × 10−6 cm.s−1, respectively. The electrocatalysis of the modified electrodes towards detection of H2O2 gave significant peak current densities and electrocatalytic potentials at −0.28 V and −0.31 V for the MnTAPc and CoTAPc modified electrodes, respectively.
- Full Text:
- Date Issued: 2015
- Authors: Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/249059 , vital:51774 , xlink:href="https://doi.org/10.1007/s00604-010-0438-6"
- Description: Metal tetra-amino phthalocyanine complexes (MTAPc; where M is Co or Mn) were immobilized on screen-printed gold electrodes pre-modified with monolayers of benzylamino groups. The functionalized electrodes were then activated using benzene-1,4-dicarbaldehyde as a linker before MTAPc complexes were immobilized. The surface coverages for the modified electrodes confirmed the perpendicular orientation of the MTAPcs. The apparent electron transfer constant (kapp) for the electrodes is 2.2 × 10−5 cm.s−1 for both CoTAPc and MnTAPc modified electrodes as calculated with data from impedance measurements. The kapp values for the bare and benzylamino modified electrodes were found to be 1.2 × 10−4 cm.s−1 and 4.9 × 10−6 cm.s−1, respectively. The electrocatalysis of the modified electrodes towards detection of H2O2 gave significant peak current densities and electrocatalytic potentials at −0.28 V and −0.31 V for the MnTAPc and CoTAPc modified electrodes, respectively.
- Full Text:
- Date Issued: 2015
Electrode modification using alkynyl substituted Fe (II) phthalocyanine via electrografting and click chemistry for electrocatalysis
- Nxele, Siphesihle R, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189296 , vital:44835 , xlink:href="https://doi.org/10.1002/elan.201500212"
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM.
- Full Text:
- Date Issued: 2015
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189296 , vital:44835 , xlink:href="https://doi.org/10.1002/elan.201500212"
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM.
- Full Text:
- Date Issued: 2015
Electrode surface modification using metallophthalocyanines and metal nanoparticles : electrocatalytic activity
- Authors: Maringa, Audacity
- Date: 2015
- Subjects: Phthalocyanines , Nanoparticles , Electrocatalysis , Scanning electron microscopy , X-ray photoelectron spectroscopy , Electrochemistry , Scanning electrochemical microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4541 , http://hdl.handle.net/10962/d1017921
- Description: Metallophthalocyanines and metal nanoparticles were successfully synthesized and applied for the electrooxidation of amitrole, nitrite and hydrazine individually or when employed together. The synthesized materials were characterized using the following techniques: predominantly scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning electrochemical microscopy (SECM). Different electrode modification methods were used to modify the glassy carbon substrates. The methods include adsorption, electrodeposition, electropolymerization and click chemistry. Modifying the glassy carbon substrate with MPc (electropolymerization) followed by metal nanoparticles (electrodeposition) or vice versa, made a hybrid modified surface that had efficient electron transfer. This was confirmed by electrochemical impedance studies with voltammetry measurements having lower detection potentials for the analytes. This work also describes for the first time the micropatterning of the glassy carbon substrate using the SECM tip. The substrate was electrografted with 4-azidobenzenediazonium salt and then the click reaction was performed using ethynylferrocene facilitated by Cu⁺ produced at the SECM tip. The SECM imaging was then used to show the clicked spot.
- Full Text:
- Date Issued: 2015
- Authors: Maringa, Audacity
- Date: 2015
- Subjects: Phthalocyanines , Nanoparticles , Electrocatalysis , Scanning electron microscopy , X-ray photoelectron spectroscopy , Electrochemistry , Scanning electrochemical microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4541 , http://hdl.handle.net/10962/d1017921
- Description: Metallophthalocyanines and metal nanoparticles were successfully synthesized and applied for the electrooxidation of amitrole, nitrite and hydrazine individually or when employed together. The synthesized materials were characterized using the following techniques: predominantly scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning electrochemical microscopy (SECM). Different electrode modification methods were used to modify the glassy carbon substrates. The methods include adsorption, electrodeposition, electropolymerization and click chemistry. Modifying the glassy carbon substrate with MPc (electropolymerization) followed by metal nanoparticles (electrodeposition) or vice versa, made a hybrid modified surface that had efficient electron transfer. This was confirmed by electrochemical impedance studies with voltammetry measurements having lower detection potentials for the analytes. This work also describes for the first time the micropatterning of the glassy carbon substrate using the SECM tip. The substrate was electrografted with 4-azidobenzenediazonium salt and then the click reaction was performed using ethynylferrocene facilitated by Cu⁺ produced at the SECM tip. The SECM imaging was then used to show the clicked spot.
- Full Text:
- Date Issued: 2015
Eliciting and combining expert opinion : an overview and comparison of methods
- Authors: Chinyamakobvu, Mutsa Carole
- Date: 2015
- Subjects: Decision making -- Statistical methods , Expertise , Bayesian statistical decision theory , Statistical decision , Delphi method , Paired comparisons (Statistics)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5579 , http://hdl.handle.net/10962/d1017827
- Description: Decision makers have long relied on experts to inform their decision making. Expert judgment analysis is a way to elicit and combine the opinions of a group of experts to facilitate decision making. The use of expert judgment is most appropriate when there is a lack of data for obtaining reasonable statistical results. The experts are asked for advice by one or more decision makers who face a specific real decision problem. The decision makers are outside the group of experts and are jointly responsible and accountable for the decision and committed to finding solutions that everyone can live with. The emphasis is on the decision makers learning from the experts. The focus of this thesis is an overview and comparison of the various elicitation and combination methods available. These include the traditional committee method, the Delphi method, the paired comparisons method, the negative exponential model, Cooke’s classical model, the histogram technique, using the Dirichlet distribution in the case of a set of uncertain proportions which must sum to one, and the employment of overfitting. The supra Bayes approach, the determination of weights for the experts, and combining the opinions of experts where each opinion is associated with a confidence level that represents the expert’s conviction of his own judgment are also considered.
- Full Text:
- Date Issued: 2015
- Authors: Chinyamakobvu, Mutsa Carole
- Date: 2015
- Subjects: Decision making -- Statistical methods , Expertise , Bayesian statistical decision theory , Statistical decision , Delphi method , Paired comparisons (Statistics)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5579 , http://hdl.handle.net/10962/d1017827
- Description: Decision makers have long relied on experts to inform their decision making. Expert judgment analysis is a way to elicit and combine the opinions of a group of experts to facilitate decision making. The use of expert judgment is most appropriate when there is a lack of data for obtaining reasonable statistical results. The experts are asked for advice by one or more decision makers who face a specific real decision problem. The decision makers are outside the group of experts and are jointly responsible and accountable for the decision and committed to finding solutions that everyone can live with. The emphasis is on the decision makers learning from the experts. The focus of this thesis is an overview and comparison of the various elicitation and combination methods available. These include the traditional committee method, the Delphi method, the paired comparisons method, the negative exponential model, Cooke’s classical model, the histogram technique, using the Dirichlet distribution in the case of a set of uncertain proportions which must sum to one, and the employment of overfitting. The supra Bayes approach, the determination of weights for the experts, and combining the opinions of experts where each opinion is associated with a confidence level that represents the expert’s conviction of his own judgment are also considered.
- Full Text:
- Date Issued: 2015
Employing safe bets: reflections on attracting, developing and retaining the next generation of academics
- Authors: Hlengwa, Amanda I
- Date: 2015
- Language: English
- Type: text , book
- Identifier: http://hdl.handle.net/10962/142145 , vital:38053 , ISBN 9781869142902 , https://books.google.co.za/books?id=49o8rgEACAAJanddq=Being+at+home:+Race,+institutional+culture+and+transformation+at+South+African+higher+education+institutionandhl=enandsa=Xandved=0ahUKEwiPgsa6mpjjAhXNN8AKHbNwAtoQ6AEIKDAA
- Description: This edited work has gathered together contributions on how to transform universities in South Africa; as many are struggling to shift their institutional culture. In a South African context, transformation means to attempt to change higher education institutions such that they no longer reflect the values promoted by apartheid but rather reflect the values embodied in South Africa's 1996 Constitution. Institutional culture is the main subject for discussion in this book. In order to transform South Africa's universities, the contributors begin by analyzing the idea of what a university is, and relatedly, what its ideal aims are. A second theme is to understand what institutional culture is and how it functions. Moreover, transformation cannot occur without transforming the broader cultures of which they are a part. Related to this theme is a general concern about how contemporary moves towards the instrumentalization of higher education affect the ability to transform institutions. These institutions are being pushed to conform to goals that are outside the traditional idea of a university, such as concerns that universities are being 'bureaucratized' and becoming corporations, instead of a place of learning open to all. In conclusion it can be said that the contemporary South African academic community has an opportunity to recreate itself as the end of apartheid created space for engaging in transformative epistemic projects. The transformation of the tertiary sector entails a transformation of institutional cultures.
- Full Text:
- Date Issued: 2015
- Authors: Hlengwa, Amanda I
- Date: 2015
- Language: English
- Type: text , book
- Identifier: http://hdl.handle.net/10962/142145 , vital:38053 , ISBN 9781869142902 , https://books.google.co.za/books?id=49o8rgEACAAJanddq=Being+at+home:+Race,+institutional+culture+and+transformation+at+South+African+higher+education+institutionandhl=enandsa=Xandved=0ahUKEwiPgsa6mpjjAhXNN8AKHbNwAtoQ6AEIKDAA
- Description: This edited work has gathered together contributions on how to transform universities in South Africa; as many are struggling to shift their institutional culture. In a South African context, transformation means to attempt to change higher education institutions such that they no longer reflect the values promoted by apartheid but rather reflect the values embodied in South Africa's 1996 Constitution. Institutional culture is the main subject for discussion in this book. In order to transform South Africa's universities, the contributors begin by analyzing the idea of what a university is, and relatedly, what its ideal aims are. A second theme is to understand what institutional culture is and how it functions. Moreover, transformation cannot occur without transforming the broader cultures of which they are a part. Related to this theme is a general concern about how contemporary moves towards the instrumentalization of higher education affect the ability to transform institutions. These institutions are being pushed to conform to goals that are outside the traditional idea of a university, such as concerns that universities are being 'bureaucratized' and becoming corporations, instead of a place of learning open to all. In conclusion it can be said that the contemporary South African academic community has an opportunity to recreate itself as the end of apartheid created space for engaging in transformative epistemic projects. The transformation of the tertiary sector entails a transformation of institutional cultures.
- Full Text:
- Date Issued: 2015
Empowerment of school governing bodies in selected schools, King William's Town education district
- Authors: Ronoti, Zamikhaya Sydwell
- Date: 2015
- Subjects: School boards -- South Africa -- Eastern Cape , School board members -- Training of -- South Africa -- Eastern Cape , School management and organization -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MPA
- Identifier: http://hdl.handle.net/10948/6585 , vital:21120
- Description: This study investigates the impact of school governing bodies (SGBs) empowerment on school governance in King William’s Town. The study focuses on SGBs challenges and plights, highlights the effects of their lack of empowerment and suggests the review of the election criteria used to elect SGBs who have the potential to be empowered. Furthermore, it explores the elements and methods of empowerment that can be utilised to empower SGBs and examines the difficulties SGBs experience in accounting for finances and formulating and implementing policies. The researcher makes recommendations on the empowerment of SGBs based on the findings of the study. It was necessary to review literature on empowerment and school governance to attain the research goals. Conflicts and the mismanagement of finances indicate a noticeable gap between South African Schools Act policy intention and policy practice. The majority of SGBs, particularly the parent component in rural and semi-urban areas, have low levels of education. As a result, it is difficult to empower members because they have little or no basic knowledge, skills and expertise with regard to school governance. The manner in which SGBs function and carry out their duties, roles and responsibilities indicates that SGBs received inadequate training. SGBs lack awareness of the regulations governing the appointment of educators, hence a number of disputes arise. The increasing number of disputes (both formal and informal) in respect of appointments and promotions results from misinterpretations of or variations in legislation governing appointments in schools as well as the competency or capacity of SGBs. To investigate this problem, interviews were used as the research instrument to gather data from eight participants from selected schools. The main finding is that the majority of the SGBs studied are incapable of being empowered due to low illiteracy levels of some members. Low levels of or no education, a lack of basic knowledge and skills and other factors, such as a lack of educational insight and the inaccessibility of information and resources due to the use of English as the medium in which SGBs are serviced, compound the problem. The quality of the empowerment workshops, which are 'one size fits all', have a marked effect on their efficiency.
- Full Text:
- Date Issued: 2015
- Authors: Ronoti, Zamikhaya Sydwell
- Date: 2015
- Subjects: School boards -- South Africa -- Eastern Cape , School board members -- Training of -- South Africa -- Eastern Cape , School management and organization -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MPA
- Identifier: http://hdl.handle.net/10948/6585 , vital:21120
- Description: This study investigates the impact of school governing bodies (SGBs) empowerment on school governance in King William’s Town. The study focuses on SGBs challenges and plights, highlights the effects of their lack of empowerment and suggests the review of the election criteria used to elect SGBs who have the potential to be empowered. Furthermore, it explores the elements and methods of empowerment that can be utilised to empower SGBs and examines the difficulties SGBs experience in accounting for finances and formulating and implementing policies. The researcher makes recommendations on the empowerment of SGBs based on the findings of the study. It was necessary to review literature on empowerment and school governance to attain the research goals. Conflicts and the mismanagement of finances indicate a noticeable gap between South African Schools Act policy intention and policy practice. The majority of SGBs, particularly the parent component in rural and semi-urban areas, have low levels of education. As a result, it is difficult to empower members because they have little or no basic knowledge, skills and expertise with regard to school governance. The manner in which SGBs function and carry out their duties, roles and responsibilities indicates that SGBs received inadequate training. SGBs lack awareness of the regulations governing the appointment of educators, hence a number of disputes arise. The increasing number of disputes (both formal and informal) in respect of appointments and promotions results from misinterpretations of or variations in legislation governing appointments in schools as well as the competency or capacity of SGBs. To investigate this problem, interviews were used as the research instrument to gather data from eight participants from selected schools. The main finding is that the majority of the SGBs studied are incapable of being empowered due to low illiteracy levels of some members. Low levels of or no education, a lack of basic knowledge and skills and other factors, such as a lack of educational insight and the inaccessibility of information and resources due to the use of English as the medium in which SGBs are serviced, compound the problem. The quality of the empowerment workshops, which are 'one size fits all', have a marked effect on their efficiency.
- Full Text:
- Date Issued: 2015
Enablers for lean process sustainability within South African manufacturing industries
- Authors: Roth, Benlloyd Koekemoer
- Date: 2015
- Subjects: Lean manufacturing , Manufacturing processes , Process control
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: http://hdl.handle.net/10948/6591 , vital:21122
- Description: James Womack and his colleagues Daniel Jones and Daniel Roos changed the way western civilization approached manufacturing. In 1990, they published a book called ‘The Machine That Changed the World: The Story of Lean Production’. It was a concept that had slowly filtered from the east but had not made its mark on the manufacturing sector. The concept of lean, born out of the Japanese Toyota Manufacturing System, was first thought to be impossible to duplicate outside of Japan. Since Womack and company popularised this “new” way of producing goods and delivering services it spread across industries finding popularity in the medical, engineering, accounting and especially the manufacturing industries. Over the last few decades lean practices has been synonymous with efficiency, cost reduction, supply chain optimisation and innovative problem solving (Anvari Norzima, Rosnah, Hojjati and Ismail, 2010; Pieterse et al., 2010; Womack et al., 1990). Lean process implementation has been researched in abundance, as has failed attempts at lean implementation. The purpose of this study was to identify and assess enablers of lean sustainability in organisations where lean processes are already being implemented. The literature study found Organisational Culture, Leadership, Employee Engagement and Trade Unions participation as factors that contributed to successful lean implementations. The author developed a model to test Organisational Culture, Leadership, Employee Engagement and Trade Unions as enablers to sustain lean practices in organisations in South Africa’s manufacturing industries. The results proved that Organisational Culture, Leadership and Employee Engagement were considered enablers for lean sustainability. These three enablers have an interlinked relationship and together help sustainability. Lacking just one factor would surely result in unsustainable lean practices. The study was conducted in the quantitative paradigm, as the hypothesised relationship was statistically tested. The data was collected from a homogenous group via an email sent with a link to the questionnaire. The data was statistically analysed with Statistica software and Microsoft Excel.
- Full Text:
- Date Issued: 2015
- Authors: Roth, Benlloyd Koekemoer
- Date: 2015
- Subjects: Lean manufacturing , Manufacturing processes , Process control
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: http://hdl.handle.net/10948/6591 , vital:21122
- Description: James Womack and his colleagues Daniel Jones and Daniel Roos changed the way western civilization approached manufacturing. In 1990, they published a book called ‘The Machine That Changed the World: The Story of Lean Production’. It was a concept that had slowly filtered from the east but had not made its mark on the manufacturing sector. The concept of lean, born out of the Japanese Toyota Manufacturing System, was first thought to be impossible to duplicate outside of Japan. Since Womack and company popularised this “new” way of producing goods and delivering services it spread across industries finding popularity in the medical, engineering, accounting and especially the manufacturing industries. Over the last few decades lean practices has been synonymous with efficiency, cost reduction, supply chain optimisation and innovative problem solving (Anvari Norzima, Rosnah, Hojjati and Ismail, 2010; Pieterse et al., 2010; Womack et al., 1990). Lean process implementation has been researched in abundance, as has failed attempts at lean implementation. The purpose of this study was to identify and assess enablers of lean sustainability in organisations where lean processes are already being implemented. The literature study found Organisational Culture, Leadership, Employee Engagement and Trade Unions participation as factors that contributed to successful lean implementations. The author developed a model to test Organisational Culture, Leadership, Employee Engagement and Trade Unions as enablers to sustain lean practices in organisations in South Africa’s manufacturing industries. The results proved that Organisational Culture, Leadership and Employee Engagement were considered enablers for lean sustainability. These three enablers have an interlinked relationship and together help sustainability. Lacking just one factor would surely result in unsustainable lean practices. The study was conducted in the quantitative paradigm, as the hypothesised relationship was statistically tested. The data was collected from a homogenous group via an email sent with a link to the questionnaire. The data was statistically analysed with Statistica software and Microsoft Excel.
- Full Text:
- Date Issued: 2015
Enabling and constraining factors in Zimbabwe's 3-3-3 teacher education curriculum model : the case of a secondary teacher education college
- Authors: Shava, Nosizo
- Date: 2015
- Subjects: Education -- Curricula -- Zimbabwe Teacher participation in curriculum planning -- Zimbabwe Teachers -- Training of -- Zimbabwe
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/5686 , vital:29362
- Description: This study offers an explanation of enabling and / or constraining factors in Zimbabwe‘s 3-3-3 secondary teacher education model for Post ‗O‘ Level Science. It is a theory driven study that derives its theoretical foundation from Roy Bhaskar‘s critical realism and Margaret Archer‘s morphogenetic approach to reality. The study therefore offers explanations about structural, cultural and agential influences that facilitate and / or hinder the 3-year program for Post ‗O‘ Level Science. This was a qualitative case study of one secondary teacher education college in Zimbabwe. Qualitative data were collected through interviews, focus group discussions and document analysis. One official from the Department of Teacher Education(DTE) at the University of Zimbabwe(UZ),the Principal, the Vice Principal and 10 lecturers from the studied college,3 Heads of Science department in secondary schools,3mentors and 5 groups of 10 and 11eleven student teachers participated in the study. The DTE Handbook (2012), vision and mission statements and core values of the Ministry of Higher and Tertiary Education Science and Technology Development (MHTESTD),DTE and the studied college, syllabuses, teaching practice reports, policy documents, external examining reports, College Academic Board (CAB) minutes, admission records, mark profiles and pass lists among other relevant documents complemented interview data. As a theory driven study, structural, cultural and agential influences were found to be enabling and / or constraining the model. The acute shortage of Science teachers in secondary schools and the few Post ‗A‘ Level Science graduates led to the re-introduction of the 3- year Post ‗O‘ Level Science program in secondary teacher education colleges. The bureaucratic structures in educational institutions, the In-Out-In structure, institutional structures such as the family, the University, the studied college, secondary schools, infrastructural facilities, material and financial resources, transport facilities and utilities such as water, electricity and the internet were established as some among other structural factors affecting the 3-3-3 model. Discourses held about the teaching profession, the vision, mission and core values of the MHTESTD,DTE and the studied college, beliefs about what Science teachers should learn, knowledge, skills, attitudes and values they should acquire and how they should be taught were established as cultural factors enabling and / or constraining the 3-3-3 model. Agential influences offering causal explanation for enablers and / or constrainers of the model were established as the decision by the Principal and the CAB to re-introduce the 3- year Post ‗O‘ Level Science program, the decision by the students to enroll for the program, the recruitment of under qualified students, the use of various teaching methods, conducting staff development and mentorship workshops and failure to increase staff establishment. The study has put forth recommendations for the improvement on constraining factors in pre-service teacher education programs. With the understanding that agency has power to reinforce or transform structures and cultures, it should not be seen to be reinforcing disadvantaged structural positions and cultures; instead, after having identified structural and cultural constrainers, it should engage in communicative and meta-reflexivity to come up with the best possible solutions to the hindrances. Courses of action should then be taken accordingly.
- Full Text:
- Date Issued: 2015
- Authors: Shava, Nosizo
- Date: 2015
- Subjects: Education -- Curricula -- Zimbabwe Teacher participation in curriculum planning -- Zimbabwe Teachers -- Training of -- Zimbabwe
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/5686 , vital:29362
- Description: This study offers an explanation of enabling and / or constraining factors in Zimbabwe‘s 3-3-3 secondary teacher education model for Post ‗O‘ Level Science. It is a theory driven study that derives its theoretical foundation from Roy Bhaskar‘s critical realism and Margaret Archer‘s morphogenetic approach to reality. The study therefore offers explanations about structural, cultural and agential influences that facilitate and / or hinder the 3-year program for Post ‗O‘ Level Science. This was a qualitative case study of one secondary teacher education college in Zimbabwe. Qualitative data were collected through interviews, focus group discussions and document analysis. One official from the Department of Teacher Education(DTE) at the University of Zimbabwe(UZ),the Principal, the Vice Principal and 10 lecturers from the studied college,3 Heads of Science department in secondary schools,3mentors and 5 groups of 10 and 11eleven student teachers participated in the study. The DTE Handbook (2012), vision and mission statements and core values of the Ministry of Higher and Tertiary Education Science and Technology Development (MHTESTD),DTE and the studied college, syllabuses, teaching practice reports, policy documents, external examining reports, College Academic Board (CAB) minutes, admission records, mark profiles and pass lists among other relevant documents complemented interview data. As a theory driven study, structural, cultural and agential influences were found to be enabling and / or constraining the model. The acute shortage of Science teachers in secondary schools and the few Post ‗A‘ Level Science graduates led to the re-introduction of the 3- year Post ‗O‘ Level Science program in secondary teacher education colleges. The bureaucratic structures in educational institutions, the In-Out-In structure, institutional structures such as the family, the University, the studied college, secondary schools, infrastructural facilities, material and financial resources, transport facilities and utilities such as water, electricity and the internet were established as some among other structural factors affecting the 3-3-3 model. Discourses held about the teaching profession, the vision, mission and core values of the MHTESTD,DTE and the studied college, beliefs about what Science teachers should learn, knowledge, skills, attitudes and values they should acquire and how they should be taught were established as cultural factors enabling and / or constraining the 3-3-3 model. Agential influences offering causal explanation for enablers and / or constrainers of the model were established as the decision by the Principal and the CAB to re-introduce the 3- year Post ‗O‘ Level Science program, the decision by the students to enroll for the program, the recruitment of under qualified students, the use of various teaching methods, conducting staff development and mentorship workshops and failure to increase staff establishment. The study has put forth recommendations for the improvement on constraining factors in pre-service teacher education programs. With the understanding that agency has power to reinforce or transform structures and cultures, it should not be seen to be reinforcing disadvantaged structural positions and cultures; instead, after having identified structural and cultural constrainers, it should engage in communicative and meta-reflexivity to come up with the best possible solutions to the hindrances. Courses of action should then be taken accordingly.
- Full Text:
- Date Issued: 2015