Reaction of Perrhenate with Phthalocyanine Derivatives in the Presence of Reducing Agents and Rhenium Oxide Nanoparticles in Biomedical Applications
- Ntsimango, Songeziwe, Gandidzanwa, Sendibitiyosi, Joseph, Sinelizwi V, Hosten, Eric C, Randall, Marvin, Edkins, Adrienne L, Khene, Samson M, Mashazi, Philani N, Nyokong, Tebello, Abrahams, Abubak’r, Tshentu, Zenixole R
- Authors: Ntsimango, Songeziwe , Gandidzanwa, Sendibitiyosi , Joseph, Sinelizwi V , Hosten, Eric C , Randall, Marvin , Edkins, Adrienne L , Khene, Samson M , Mashazi, Philani N , Nyokong, Tebello , Abrahams, Abubak’r , Tshentu, Zenixole R
- Date: 2022
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/300257 , vital:57910 , xlink:href="https://doi.org/10.1002/open.202200037"
- Description: A novel alternative route to access rhenium(V)−phthalocyanine complexes through direct metalation of metal-free phthalocyanines (H2Pcs) with a rhenium(VII) salt in the presence of various two-electron reducing agents is presented. Direct ion metalation of tetraamino- or tetranitrophthalocyanine with perrhenate (ReO4−) in the presence of triphenylphosphine led to oxidative decomposition of the H2Pcs, giving their respective phthalonitriles. Conversely, treatment of H2Pcs with ReO4− employing sodium metabisulfite yielded the desired ReVO−Pc complex. Finally, reaction of H2Pcs with ReO4− and NaBH4 as reducing agent led to the formation of rhenium oxide (RexOy) nanoparticles (NPs). The NP synthesis was optimised, and the RexOy NPs were capped with folic acid (FA) conjugated with tetraaminophthalocyanine (TAPc) to enhance their cancer cell targeting ability. The cytotoxicity profile of the resultant RexOy−TAPc−FA NPs was assessed and found to be greater than 80 % viability in four cell lines, namely, MDA−MB-231, HCC7, HCC1806 and HEK293T. Non-cytotoxic concentrations were determined and employed in cancer cell localization studies. The particle size effect on localization of NPs was also investigated using confocal fluorescence and transmission electron microscopy. The smaller NPs (≈10 nm) were found to exhibit stronger fluorescence properties than the ≈50 nm NPs and exhibited better cell localization ability than the ≈50 nm NPs.
- Full Text:
- Authors: Ntsimango, Songeziwe , Gandidzanwa, Sendibitiyosi , Joseph, Sinelizwi V , Hosten, Eric C , Randall, Marvin , Edkins, Adrienne L , Khene, Samson M , Mashazi, Philani N , Nyokong, Tebello , Abrahams, Abubak’r , Tshentu, Zenixole R
- Date: 2022
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/300257 , vital:57910 , xlink:href="https://doi.org/10.1002/open.202200037"
- Description: A novel alternative route to access rhenium(V)−phthalocyanine complexes through direct metalation of metal-free phthalocyanines (H2Pcs) with a rhenium(VII) salt in the presence of various two-electron reducing agents is presented. Direct ion metalation of tetraamino- or tetranitrophthalocyanine with perrhenate (ReO4−) in the presence of triphenylphosphine led to oxidative decomposition of the H2Pcs, giving their respective phthalonitriles. Conversely, treatment of H2Pcs with ReO4− employing sodium metabisulfite yielded the desired ReVO−Pc complex. Finally, reaction of H2Pcs with ReO4− and NaBH4 as reducing agent led to the formation of rhenium oxide (RexOy) nanoparticles (NPs). The NP synthesis was optimised, and the RexOy NPs were capped with folic acid (FA) conjugated with tetraaminophthalocyanine (TAPc) to enhance their cancer cell targeting ability. The cytotoxicity profile of the resultant RexOy−TAPc−FA NPs was assessed and found to be greater than 80 % viability in four cell lines, namely, MDA−MB-231, HCC7, HCC1806 and HEK293T. Non-cytotoxic concentrations were determined and employed in cancer cell localization studies. The particle size effect on localization of NPs was also investigated using confocal fluorescence and transmission electron microscopy. The smaller NPs (≈10 nm) were found to exhibit stronger fluorescence properties than the ≈50 nm NPs and exhibited better cell localization ability than the ≈50 nm NPs.
- Full Text:
Nanohybrid electrocatalyst based on cobalt phthalocyanine-carbon nanotube-reduced graphene oxide for ultrasensitive detection of glucose in human saliva
- Adeniyi, Omotayo, Nwahara, Nnamdi, Mwanza, Daniel, Nyokong, Tebello, Mashazi, Philani N
- Authors: Adeniyi, Omotayo , Nwahara, Nnamdi , Mwanza, Daniel , Nyokong, Tebello , Mashazi, Philani N
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/231356 , vital:49880 , xlink:href="https://doi.org/10.1016/j.snb.2021.130723"
- Description: The current diabetes management systems require collecting blood samples via an invasive and painful finger pricking leading to the formation of callus, scarring and loss of sensibility to patients due to continuous monitoring. Therefore, a non-invasive and painless method of determining glucose levels would be desirable to diabetes patients who need constant monitoring. Saliva glucose measurement is a non-invasive alternative for diabetes management. A highly sensitive, stable, and selective non-enzymatic electrochemical sensor that can accurately quantify saliva glucose is required. A single-walled carbon nanotube/reduced graphene oxide/cobalt phthalocyanines nanohybrid modified glassy carbon electrode (GCE-SWCNT/rGO/CoPc) has been fabricated for the non-enzymatic determination of glucose in human saliva. The SWCNT/rGO/CoPc was characterized using various spectroscopic, microscopic, and electrochemical techniques. The synergistic effect between SWCNT, rGO, and CoPc facilitated excellent electron transfer process that improved the sensor sensitivity. The GCE-SWCNT/rGO/CoPc sensor exhibited two linear responses in the 0.30 μM to 0.50 mM and 0.50–5.0 mM glucose concentration ranges, and the detection limit was 0.12 μM. The sensor had an excellent saliva glucose detection sensitivity of 992.4 μA·mM−1·cm−2 and high specificity for glucose in the presence of other coexisting analytes. In addition, it showed good storage stability, reusability, and a fast response time of about 1.2 s. The GCE-SWCNT/rGO/CoPc nanohybrid electrode showed excellent potential for developing accurate, non-invasive, and painless glucose sensing.
- Full Text:
- Authors: Adeniyi, Omotayo , Nwahara, Nnamdi , Mwanza, Daniel , Nyokong, Tebello , Mashazi, Philani N
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/231356 , vital:49880 , xlink:href="https://doi.org/10.1016/j.snb.2021.130723"
- Description: The current diabetes management systems require collecting blood samples via an invasive and painful finger pricking leading to the formation of callus, scarring and loss of sensibility to patients due to continuous monitoring. Therefore, a non-invasive and painless method of determining glucose levels would be desirable to diabetes patients who need constant monitoring. Saliva glucose measurement is a non-invasive alternative for diabetes management. A highly sensitive, stable, and selective non-enzymatic electrochemical sensor that can accurately quantify saliva glucose is required. A single-walled carbon nanotube/reduced graphene oxide/cobalt phthalocyanines nanohybrid modified glassy carbon electrode (GCE-SWCNT/rGO/CoPc) has been fabricated for the non-enzymatic determination of glucose in human saliva. The SWCNT/rGO/CoPc was characterized using various spectroscopic, microscopic, and electrochemical techniques. The synergistic effect between SWCNT, rGO, and CoPc facilitated excellent electron transfer process that improved the sensor sensitivity. The GCE-SWCNT/rGO/CoPc sensor exhibited two linear responses in the 0.30 μM to 0.50 mM and 0.50–5.0 mM glucose concentration ranges, and the detection limit was 0.12 μM. The sensor had an excellent saliva glucose detection sensitivity of 992.4 μA·mM−1·cm−2 and high specificity for glucose in the presence of other coexisting analytes. In addition, it showed good storage stability, reusability, and a fast response time of about 1.2 s. The GCE-SWCNT/rGO/CoPc nanohybrid electrode showed excellent potential for developing accurate, non-invasive, and painless glucose sensing.
- Full Text:
Applications of polymerized metal tetra-amino phthalocyanines towards hydrogen peroxide detection
- Mashazi, Philani N, Togo, Chumunorwa, Limson, Janice L, Nyokong, Tebello
- Authors: Mashazi, Philani N , Togo, Chumunorwa , Limson, Janice L , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/261840 , vital:53451 , xlink:href="https://doi.org/10.1142/S1088424610001994"
- Description: This work reports the use of metallo tetra-amino phthalocyanines (MTAPc, M = Co and Mn) polymer thin films on gold and glassy carbon electrode surfaces for the detection and monitoring of hydrogen peroxide (H2O2). The polymer-modified electrodes were characterized using electrochemical and microscopic-based methods. Atomic force microscopy (AFM) was used to study the bare and polymer-modified ITO surfaces. The electrocatalytic reduction of H2O2 with glassy carbon polymer-modified electrodes gave higher current densities compared to their gold counterparts. The electroanalytical properties of H2O2 were obtained using a real-time calibration curve of the amperometric determination in pH 7.4 aqueous solution. The limits of detection (LoD) of the polymer-modified electrodes towards electroreduction of H2O2 were of the order of 10–7 M, with high sensitivity ranging from 6.0–15.4 mA.mM-1.cm-2.
- Full Text:
- Authors: Mashazi, Philani N , Togo, Chumunorwa , Limson, Janice L , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/261840 , vital:53451 , xlink:href="https://doi.org/10.1142/S1088424610001994"
- Description: This work reports the use of metallo tetra-amino phthalocyanines (MTAPc, M = Co and Mn) polymer thin films on gold and glassy carbon electrode surfaces for the detection and monitoring of hydrogen peroxide (H2O2). The polymer-modified electrodes were characterized using electrochemical and microscopic-based methods. Atomic force microscopy (AFM) was used to study the bare and polymer-modified ITO surfaces. The electrocatalytic reduction of H2O2 with glassy carbon polymer-modified electrodes gave higher current densities compared to their gold counterparts. The electroanalytical properties of H2O2 were obtained using a real-time calibration curve of the amperometric determination in pH 7.4 aqueous solution. The limits of detection (LoD) of the polymer-modified electrodes towards electroreduction of H2O2 were of the order of 10–7 M, with high sensitivity ranging from 6.0–15.4 mA.mM-1.cm-2.
- Full Text:
- «
- ‹
- 1
- ›
- »