Formulation and evaluation of liposomal films for buccal delivery of antiretroviral drug
- Authors: Okafor, Nnamdi Ikemefuna
- Date: 2020
- Subjects: Liposomes , Highly active antiretroviral therapy , Antiretroviral agents , HIV infections -- Prevention
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/117161 , vital:34485
- Description: The human immune deficiency virus (HIV) infection has been ranked as one of the most devastating microbial infections in the world. This status is a result of the HIV rapid genetic variation, which limits discovery of a vaccine. Use application of antiretroviral therapy (ARVT) in treatment of the disease caused by the HIV infection (known as acquired immunodeficiency syndrome, HIV-AIDS) is frequently compromised by several factors such as the low bioavailability and severe adverse effects associated with the existing antiretroviral drugs (ARVDs). This underlines the need for controlling the pharmacokinetics profiles of ARVD using effective vehicles that can modify drug biodistribution. The same is true for many other conditions, where delivery systems can determine the success or failure of treatment by controlling pharmacokinetic and dynamic properties. The mucosal linings of the oral cavities in addition offer adorable route of administration for systematic drug delivery, improving drug therapeutic performance and often preferred by clinicians and patients. Liposomes are tiny spherical sacs of phospholipid molecules enclosing water droplets, formed (artificially) to carry drugs or other substances into the tissues by crossing and targeting to specific organelles. This work therefore focused on preparation of liposomes and liposomal buccal films (BFs) for potential buccal delivery of efavirenz, an ARVD model endowed with poor solubility and several side effects. The liposomes were prepared by thin film hydration method using crude soybean lecithin (CL) and cholesterol. Efavirenz loaded liposomes were evaluated for particle size, Zeta potential (ZP), morphology, encapsulation efficiency (EE%) and release kinetics studies. The physiochemical properties of the liposomes were also evaluated using Differential Scanning Calorimetry (DSC), X-ray diffraction (XRD), energy dispersity spectroscopy (EDS), and Fourier transform infrared (FTIR), while the formulation with the best encapsulation efficiency was used as the solvent medium for the buccal film formation. The buccal films were prepared using solvent casting method, where the liposomal suspension was used as the dispersing medium. The films were optimized for physical properties (thickness, weight variation and folding endurance) using digital Vernier calliper and digital weighing balance. The physiochemical properties of the selected BFs films made of Carbopol (CP) and its combination with Pluronic F127 (PF127) were further characterized using XRD, DSC, FTIR, Transmission Electron Microscopy (TEM), EDS and Scanning Electron Microscopy (SEM). The permeation study of the selected BFs was investigated using Franz diffusion cell. The BFs composed of CP alone or its combination with PF127 demonstrated much better bio-adhesive properties than the films made of other polymers (like Hydroxyl propyl methyl cellulose, HPMC) alone or in combination with PF127. The developed liposome formulation showed high encapsulation 98.8 ± 0.01 % in CL to cholesterol mass ratio of 1:1 and total lipid to drug mass ratio of 2:1. The average particle size 104.82 ± 2.29 nm and Zeta potential -50.33 ± 0.95 mV of these liposomes were found to be attractive for targeted delivery to the HIV infected cells. The CP based BFs (without and with PF127) exhibited good film thickness 0.88 ± 0.10 and 0.76 ± 0.14 mm, with weight uniformity 68.22 ± 1.04 and 86.28 ± 2. 16 mg, satisfactory flexibility values 258 and 321, and slightly acidic pH 6.43 ± 0.76 and 6.32 ± 0.01. The swelling percentage was found to be 50 % for CP film alone and 78 % for CP film with PF127. The cumulative amount of drug that permeated through the buccal epithelium over 24 hours was about 66 % from CP film alone and 75 % from CP film with PF127. Since no evidence of the liposomal encapsulation of EFV have been reported to our knowledge, we find the insights from the present study valuable as a set of preliminary data to encourage further investigations of the encapsulation and delivery of EFV like antiretrovirals for enhanced solubility, site targeting and prolonged release using crude soybean lecithin and mucoadhesive polymers, which holds some added economical values as naturally occurring lipid and polymeric mixtures as a promising delivery systems for buccal delivery of ARVDs.
- Full Text:
- Date Issued: 2020
- Authors: Okafor, Nnamdi Ikemefuna
- Date: 2020
- Subjects: Liposomes , Highly active antiretroviral therapy , Antiretroviral agents , HIV infections -- Prevention
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/117161 , vital:34485
- Description: The human immune deficiency virus (HIV) infection has been ranked as one of the most devastating microbial infections in the world. This status is a result of the HIV rapid genetic variation, which limits discovery of a vaccine. Use application of antiretroviral therapy (ARVT) in treatment of the disease caused by the HIV infection (known as acquired immunodeficiency syndrome, HIV-AIDS) is frequently compromised by several factors such as the low bioavailability and severe adverse effects associated with the existing antiretroviral drugs (ARVDs). This underlines the need for controlling the pharmacokinetics profiles of ARVD using effective vehicles that can modify drug biodistribution. The same is true for many other conditions, where delivery systems can determine the success or failure of treatment by controlling pharmacokinetic and dynamic properties. The mucosal linings of the oral cavities in addition offer adorable route of administration for systematic drug delivery, improving drug therapeutic performance and often preferred by clinicians and patients. Liposomes are tiny spherical sacs of phospholipid molecules enclosing water droplets, formed (artificially) to carry drugs or other substances into the tissues by crossing and targeting to specific organelles. This work therefore focused on preparation of liposomes and liposomal buccal films (BFs) for potential buccal delivery of efavirenz, an ARVD model endowed with poor solubility and several side effects. The liposomes were prepared by thin film hydration method using crude soybean lecithin (CL) and cholesterol. Efavirenz loaded liposomes were evaluated for particle size, Zeta potential (ZP), morphology, encapsulation efficiency (EE%) and release kinetics studies. The physiochemical properties of the liposomes were also evaluated using Differential Scanning Calorimetry (DSC), X-ray diffraction (XRD), energy dispersity spectroscopy (EDS), and Fourier transform infrared (FTIR), while the formulation with the best encapsulation efficiency was used as the solvent medium for the buccal film formation. The buccal films were prepared using solvent casting method, where the liposomal suspension was used as the dispersing medium. The films were optimized for physical properties (thickness, weight variation and folding endurance) using digital Vernier calliper and digital weighing balance. The physiochemical properties of the selected BFs films made of Carbopol (CP) and its combination with Pluronic F127 (PF127) were further characterized using XRD, DSC, FTIR, Transmission Electron Microscopy (TEM), EDS and Scanning Electron Microscopy (SEM). The permeation study of the selected BFs was investigated using Franz diffusion cell. The BFs composed of CP alone or its combination with PF127 demonstrated much better bio-adhesive properties than the films made of other polymers (like Hydroxyl propyl methyl cellulose, HPMC) alone or in combination with PF127. The developed liposome formulation showed high encapsulation 98.8 ± 0.01 % in CL to cholesterol mass ratio of 1:1 and total lipid to drug mass ratio of 2:1. The average particle size 104.82 ± 2.29 nm and Zeta potential -50.33 ± 0.95 mV of these liposomes were found to be attractive for targeted delivery to the HIV infected cells. The CP based BFs (without and with PF127) exhibited good film thickness 0.88 ± 0.10 and 0.76 ± 0.14 mm, with weight uniformity 68.22 ± 1.04 and 86.28 ± 2. 16 mg, satisfactory flexibility values 258 and 321, and slightly acidic pH 6.43 ± 0.76 and 6.32 ± 0.01. The swelling percentage was found to be 50 % for CP film alone and 78 % for CP film with PF127. The cumulative amount of drug that permeated through the buccal epithelium over 24 hours was about 66 % from CP film alone and 75 % from CP film with PF127. Since no evidence of the liposomal encapsulation of EFV have been reported to our knowledge, we find the insights from the present study valuable as a set of preliminary data to encourage further investigations of the encapsulation and delivery of EFV like antiretrovirals for enhanced solubility, site targeting and prolonged release using crude soybean lecithin and mucoadhesive polymers, which holds some added economical values as naturally occurring lipid and polymeric mixtures as a promising delivery systems for buccal delivery of ARVDs.
- Full Text:
- Date Issued: 2020
Prediction of mass spectra for natural products using an ab initio approach
- Authors: Novokoza, Yolanda
- Date: 2020
- Subjects: Molecular dynamics , Molecular dynamics -- Computer simulation , Mass spectroscopy , Electron impact ionization
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/167166 , vital:41443
- Description: Mass spectrometry (MS) is a technique that measures the fragmentation of molecules, dependent on the molecule’s chemical composition and structure, by first introducing a charge on the molecules. The instrument records the mass to charge ratio, but the energy from the ionization process causes the molecule to fragment. The resultant mass spectrum is highly indicative of not only the molecule analyzed, but also its chemical composition. MS is used in research and industry for both routine and research purposes. One such way to ionize molecules for MS is by bombarding the molecule with electrons which is the basis of electron impact mass spectrometry (EIMS). Although EIMS is widely used, prediction of electron impact mass spectra from first principles is a challenging problem due to a need to accurately determine the probability of different fragmentation pathways of a molecule. Ab initio molecular dynamics based methods are able to explore in an automatic fashion the energetically available fragmentation paths thus give reaction mechanisms in an unbiased way. The mass spectra of five molecules have been explored in work-flows leading to the prediction of mass spectra. These molecules include three natural products alpha-hispanolol, PFB oxime derivative and boronolide (for which experimental mass spectra were not available) and two compounds from the NIST database (for which experimental mass spectra were available). For each of these systems many random conformations were generated using the RDKit library. To all conformations random velocities were applied to each atom. Ab initio molecular dynamics was performed on each conformer, using these initial random velocities using CP2K software, at DFTB+ level at a variety of highly raised temperatures (to accelerate the formation of fragments) Fragmentation was monitored by iterating through all bonds, and identifying bond breakages during dynamics. Graph theoretical packages were used then to track distinct fragments generated. For each of these fragments, charges were determined from Mulliken analysis for all atoms on the fragment from the QM calculations and sum of atomic spin densities per fragment was also plotted. The fragment with the greatest charge (corresponding to the formation of a cation fragment) was taken for plotting on the mass spectrum. Finally, from the mass of the fragment and its elemental composition, the isotopic distribution for the fragment was determined, and this distribution was included by addition in to the mass spectrum. For all trajectories, the sum of all isotopic distributions determined the final mass spectrum.
- Full Text:
- Date Issued: 2020
- Authors: Novokoza, Yolanda
- Date: 2020
- Subjects: Molecular dynamics , Molecular dynamics -- Computer simulation , Mass spectroscopy , Electron impact ionization
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/167166 , vital:41443
- Description: Mass spectrometry (MS) is a technique that measures the fragmentation of molecules, dependent on the molecule’s chemical composition and structure, by first introducing a charge on the molecules. The instrument records the mass to charge ratio, but the energy from the ionization process causes the molecule to fragment. The resultant mass spectrum is highly indicative of not only the molecule analyzed, but also its chemical composition. MS is used in research and industry for both routine and research purposes. One such way to ionize molecules for MS is by bombarding the molecule with electrons which is the basis of electron impact mass spectrometry (EIMS). Although EIMS is widely used, prediction of electron impact mass spectra from first principles is a challenging problem due to a need to accurately determine the probability of different fragmentation pathways of a molecule. Ab initio molecular dynamics based methods are able to explore in an automatic fashion the energetically available fragmentation paths thus give reaction mechanisms in an unbiased way. The mass spectra of five molecules have been explored in work-flows leading to the prediction of mass spectra. These molecules include three natural products alpha-hispanolol, PFB oxime derivative and boronolide (for which experimental mass spectra were not available) and two compounds from the NIST database (for which experimental mass spectra were available). For each of these systems many random conformations were generated using the RDKit library. To all conformations random velocities were applied to each atom. Ab initio molecular dynamics was performed on each conformer, using these initial random velocities using CP2K software, at DFTB+ level at a variety of highly raised temperatures (to accelerate the formation of fragments) Fragmentation was monitored by iterating through all bonds, and identifying bond breakages during dynamics. Graph theoretical packages were used then to track distinct fragments generated. For each of these fragments, charges were determined from Mulliken analysis for all atoms on the fragment from the QM calculations and sum of atomic spin densities per fragment was also plotted. The fragment with the greatest charge (corresponding to the formation of a cation fragment) was taken for plotting on the mass spectrum. Finally, from the mass of the fragment and its elemental composition, the isotopic distribution for the fragment was determined, and this distribution was included by addition in to the mass spectrum. For all trajectories, the sum of all isotopic distributions determined the final mass spectrum.
- Full Text:
- Date Issued: 2020
- «
- ‹
- 1
- ›
- »