Effect of post-slaughter handling on physico-chemical and microbiological quality of red meat along the distribution chain in the Eastern Cape Province, South Africa
- Authors: Rani, Zikhona Theodora
- Date: 2015
- Subjects: Meat -- Microbiology Meat -- Transportation -- South Africa -- Eastern Cape Meat -- Quality -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/2490 , vital:27875
- Description: The broad objective of the study was to investigate the effect of post-slaughter handling in the distribution chain on red meat quality and safety. A survey was conducted among 300 consumers and 100 meat handlers in five different municipalities (Buffalo City, Nkonkobe, Ngqushwa, Lukhanje and Amahlathi) in the Eastern Cape Province of South Africa to investigate their perceptions on meat quality and safety, together with challenges faced by meat handlers during the distribution of meat from the abattoir to retailers. The microbiological profile and physico-chemical quality of red meat at different stages of the abattoir to retail outlets in the distribution chain were also determined. Swabs (n=216) and meat samples (n=450) were collected from beef, pork and mutton carcasses during the loading process of carcasses into trucks at the abattoir, when offloading carcasses at the supply points and during marketing. Physico-chemical qualities such as colour (L* - lightness, b* - redness and a* - yellowness) and meat pH measurements were taken at each point. To determine the microbiological profiles of the carcasses, four microbiological parameters were considered: Total bacteria count (general bacteria), coliform count (related to hygiene and indicator for pathogens), Escherichia coli (Gram-negative pathogen) and Staphylococcus aureus (Gram-positive pathogen). Two types of packaging (vacuum and overwrapping) were used to determine their effect on shelf-life and microbiological quality of red meat under the normal marketing conditions over a storage duration of 15 days. The results from the study showed low awareness of consumers about the pathogenic diseases which arise from meat. A strong significant association (p ˂ 0.05) between educational status and awareness on meat safety was observed. Most of the consumers perceived that quality goes beyond safety such that 35.6 percent of the respondents indicated that they did not have a problem with consuming spoiled meat, whilst the remaining 64.4 percent indicated that they would r eject spoiled meat. Although retailers indicated that they take meat safety into consideration in their shops, 92 percent of the retailers revealed that they do not perform microbial assessment of meat in their shops. A series of loading and off-loading, temperature fluctuations, environmental temperatures and ques during offloading were reported as the major challenges during transportation of carcasses from the abattoir to the supply points. The microbial counts were significantly (p<0.05) higher in samples from the commercial abattoir than in those from the communal abattoir. Escherichia coli was the predominant microbial contaminant in the samples from both abattoirs. When following the chain, total bacterial count (TBC), coliform count (CC) and the levels of E. coli contamination increased progressively between the loading and the off-loading points (5.1 to 7.9 log10 CFU/cm2; 5.0 to 5.6 log10 CFU/cm2 and 2.7 to 3.7 log10 CFU/cm2, respectively). The storage period, meat type, distance during transportation and temperature were found to have a significant impact on the microbial levels during the distribution of carcasses. Distribution stage had a significant effect (p<0.05) on some of the physico- chemical meat quality attributes and differences in the lightness (L*) and redness (a*) values between the loading, off-loading and display points were observed. Consumers perceived retailer class as one of the factors influencing meat quality, but according to the instrumental measurements retailer class did not have a significant effect on physico-chemical meat quality. However, distance and storage duration significantly (p<0.05) affected (L*) and (a*) values in the meat during distribution chain. Vacuum and overwrapping packaging significantly affected (p<0.05) the shelf life of meat. Therefore, it was concluded that post-slaughter handling during the distribution chain affects the physico- chemical, microbiological and shelf-life of meat.
- Full Text:
- Date Issued: 2015
Effect of Tenebrio molitor larvae as a protein source on growth performance, carcass yield and meat quality of broiler chickens
- Authors: Mngqi, Sinethemba Census
- Date: 2015
- Subjects: Broilers (Chickens) Chickens -- Feeding and feeds Meat -- Quality
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/2622 , vital:27944
- Description: This study was conducted to assess the effect of including Tenebrio molitor larvae (T. molitor L) as a protein source in different diets on broiler performance, carcass characteristics and meat quality. A total of 144 day-old Cobb-500 chicks were randomly allocated into three treatment groups, each was allocated 16 birds and reared in 9 identical pens. Experimental diets used were as follows: T1 Control (no T. molitor L inclusion); T2 and T3 contained levels of T. molitor L at 5 percent and 10 percent of dry matter (DM) intake, respectively. Body weights (BW), average daily gain (ADG), feed intake (FI), and Feed conversion ratio (FCR) were measured for the 1st experimental chapter. For the second experimental chapter; live weights (LW) of broilers were recorded before slaughter and thereafter carcass weights (CW), meat yield (weights of breast, thigh, drumstick and wing) were recorded. The dressing percentage (DP percent) was also calculated. Breast muscles were sampled for meat pH and colour measurements. The LW of birds from T1 (0 percent T. molitor L) were significantly different (P<0.05) from both T2 (5 percent T. molitor L) and T3 (10 percent T. molitor L) which were similar to each other, with T2 exhibiting the highest live weights (2166g) and the control treatment exhibiting the lowest live weights (2018.3g). In CW, T1 was significantly different (P<0.05) from T2 while it was similar (P>0.05) to T3. The dressing percent of T1 was significantly different (P<0.05) from T2 and T3 which were similar to each other, with T2 having the highest dressing percentage (78, 2 percent) and T1 having the lowest DP percent (66 percent). The breasts in T2 were significantly higher and different (P<0.05) from both T1 and T3 which were similar to each other. The drumsticks in T3 were significantly different (P<0.05) from T1 while they were similar to T2 with values with T2 having highest values. After 45 minutes of slaughter, a significant difference (P<0.05) was observed in L⃰ among all treatments. In redness (a⃰), T3 was significantly different from T1 but was similar to T2 and all treatments in this study exhibited a darker red meat, with T3 muscles exhibiting darker red colour than the other treatments. Similar results were observed in yellowness (b⃰), where the breast muscles from T3 were more yellow than the other treatments. After 24 hours of slaughter, T2 L⃰ values were significantly different (P<0.05) from both T1 and T3 which were similar to each other. It was also found that the broiler chickens given diet with no T. molitor L inclusion (T1) had lower values of BW, FI, ADG and FCR throughout the experiment than those that were in T2 and T3 with 5 percent and 10 percent T. molitor L inclusion levels, respectively. However, it was also found that although broilers with 5 percent T. molitor L inclusion (T2) in their diet had high ABW and ADG than the broilers with 10 percent T. molitor L inclusion (T3), the T3 birds compared favourably to T2 birds as they required low feed intake to reach the same slaughter weight due to high FCR. It was, therefore, concluded that T. molitor L meal can be incorporated into the diets of broilers to produce heavy birds either at 5 or 10 percent. However, although 5 percent T. molitor L inclusion yields heavier carcasses, the 10 percent T. molitor L inclusion compared favourably to 5 percent inclusion since it required low feed intake to reach the same slaughter weights and there were slight differences on meat quality attributes between the two treatments.Thus T. molitor L at 10 percent inclusion levels was the best inclusion level to enhance broiler growth performance, carcass yield, meat yield and meat quality.
- Full Text:
- Date Issued: 2015
Effects of natural antioxidants and thermal treatment on quality of meat from Bonsmara and non-descripts cattle
- Authors: Falowo, Andrew Bamidele
- Date: 2015
- Subjects: Meat -- Preservation Antioxidants Meat -- Microbiology
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/2589 , vital:27906
- Description: The broad objective of this study was to determine the effects of natural antioxidants and thermal treatment on quality of meat from Bonsmara and non-descript cattle. A survey was conducted among 222 consumers in Alice (Fort Hare University community), Eastern Cape Province to determine the level of their awareness on application of antioxidants as preservatives in meat and meat products during storage. Representative samples of Muscularis longissimuss thoracis et lumborum and liver were collected from each carcass of Bonsmara (n=40) and non-descript (n=40) cattle reared on natural pasture to determine the effect of natural antioxidants and thermal treatment on their quality. The results from the survey revealed that 51.35 percent of the respondents had not heard about the use of antioxidant as preservatives in meat products. However, among the remaining respondents (48.65 percent) that were aware of antioxidant and its use as preservative, about 19 percent knew of natural antioxidants, 35 percent synthetic antioxidants while 46 percent had knowledge of both. The results further revealed that the majority of the respondents (82 percent) that had knowledge of natural antioxidants were concerned about the use of synthetic antioxidants in meat and meat products due to their health consequences. The in vitro antioxidant and antibacterial analyses of Bidens pilosa and Moringa oleifera leaf extracts revealed that they contain rich bioactive compounds. Furthermore, the addition of leaf extracts from Moringa oleifera (ML, 0.05 and 0.1 percent w/w) and Biden pilosa (BP, 0.05 and 0.1 percent w/w) to ground raw beef as a natural antioxidant were found to improve the physicochemical, oxidative stability and microbiological qualities of meat compared to the control (meat without extract) and BHT treatment (0.02 percent w/w) during 6 days storage at 40 C. Cattle breed did not have much effect on colour parameters. However, the overall pH of ground beef treated with extracts showed lower values than control and BHT treated beef. Also, ground beef samples containing extracts exhibited (P < 0.05) better colour stability, especially higher redness (a* values), than the control. The formation of TBARS in beef samples treated with extracts was significantly (P < 0.05) lower than the control and BHT treatment. The antibacterial assay of the extracts revealed an appreciable broad spectrum activity against the tested bacteria and microbial counts in ground beef samples compared to control and BHT group. Ground beef treated with plant extracts exhibited lower microbial and lactic acid bacterial counts (P < 0.05) at day 0 and 3 than control samples. Moreover, it was observed that application of sous vides thermal method did not significantly affect the fatty acids and mineral loss in beef and liver across the treatments. However, the total concentration of MUFA was lower in raw liver (20.11±2.38 - 21.08±1.23 percent) than in beef (40.22±1.90 - 42.53±1.29 percent), while total PUFA content were higher in liver (30.73±2.60 - 31.11±1.19 percent) than in beef samples (10.13±3.36 - 11.02±2.74 percent) (p < 0.05). The results also revealed that liver samples from Bonsmara and non-descript cattle had a higher percentage of intramuscular fat content of 4.67 ± 0.53 percent and 4.44 ± 0.53 percent respectively, and fat free dry matter of 27.51 ± 1.05 percent and 25.73 ± 1.05 percent, respectively, than the beef samples (p < 0.05). The concentrations of Mg (52.80±0.22 - 53.70±0.02mg/100g) and Zn (8.90±0.15 - 19.60±0.15mg/100g) were higher in beef than liver samples. The level of Ca (17.00±0.17 - 17.50 ± 0.17mg/100g) in liver was higher than that of beef samples. It was concluded that most consumers preferred the use of natural antioxidants in meat products than synthetic antioxidants due to their health risk. The effectiveness of M. oleifera and B. pilosa leaf extracts on meat quality also revealed that these plants are promising candidates as natural preservatives and their application should be considered in the meat industry. Lastly, findings from this study showed that application of the sous vide technique could protect meat products from nutritional loss during thermal treatment.
- Full Text:
- Date Issued: 2015
Effects of political instability in development in South Sudan
- Authors: Annan, David
- Date: 2015
- Subjects: Political stability -- Africa -- History , Economic development -- Political aspects , Africa -- Politics and government
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:9184 , http://hdl.handle.net/10948/d1020190
- Description: The signing of the Comprehensive Peace Agreement (CPA) between the Republic of Sudan represented by the National Congress Party (NCP) and the SPLM (Sudan People’s Liberation Movement) which represented the people of the Southern part of Sudan in January 2005 ushered in a rare era of peace and hope for the rebuilding and construction of the war ravaged South Sudan. Coupled with the attainment of Independence for South Sudan through an internationally supervised referendum in January 2011, the objectives of years of struggle by the people of the formerly semi-autonomous region were completed. From 2005 until after the independence of South Sudan however, a period that initially was marked by huge euphoria and broad based anticipation of development boom, the support from both local and international actors for the struggle and the plight of the people of South Sudan is waning and at worst has now turned into despair and hopelessness. After attaining independence in 2011, the highest party organ, the Political Bureau decided to remove candidates who were popularly voted by their constituents and replaced them with their cronies, leading to mass exodus of cadres from the party. On top of that, the wide believe that the elections were rigged for SPLM candidates at the expense of the Independent candidates led to another wave of exodus and open rebellion by many veteran cadres of the movement. Today, these rebellions coupled with some complex problematic societal issues are major concern and a source of political instability and violence in some parts of the country. Secondly, the hasty process of the Disarmament, Demobilization, and Reintegration (DDR) campaign, which in some cases were forcefully done left some communities exposed and venerable to attacks by rival communities. This continue to exacerbate and ignite tribal hatred, tension and stereotypes between communities especially in the traditionally volatile parts of the country that are known for cattle rustling and tribal rivalry as a form of cultural practice. Unresolved post secession issues within the SPLM had resulted to political instability and violence thus having negative economic consequences for South Sudan and all the gains the country had made in the past few years vanished after December 15 2013 political upheaval. This thesis will examine the effects of these mentioned complex political instability and economic dilemma South Sudan is being confronted with in the face of the fact that it is still in the process of nation building having attained its Independence only in July 2011.
- Full Text:
- Date Issued: 2015
Efficiency evaluation of South Africa tertiary education institutions using data envelopment analysis
- Authors: Chitekedza, Ignatious
- Date: 2015
- Subjects: Data envelopment analysis -- South Africa , Principal components analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/4764 , vital:20674
- Description: With an increasing number of students enrolling at higher education institutions in South Africa, it has become important to investigate whether these institutions are using their resources adequately. This study uses data envelopment analysis (DEA) to estimate the efficiency of 23 South African tertiary education institutions based on both teaching and research outputs. Using DEA we are able to rank South African universities according to their use of resources in these two areas. These rankings can identify institutions which are performing well and also those which require improvement. The effect that merging institutions has on this efficiency is also determined. Owing to the limited sample size, variable reduction techniques, including the efficiency contribution measure (ECM) and principal components analysis (PCA-DEA), were used to improve the discrimination of the analysis.
- Full Text:
- Date Issued: 2015
Electrical-static discharge in single point diamond turning machining of contact lens polymers
- Authors: Kadermani, Mohamed Munir
- Date: 2015
- Subjects: Electric discharges , Electrostatics , Contact lenses , Polymers
- Language: English
- Type: Thesis , Masters , MEngineering (Mechatronics)
- Identifier: http://hdl.handle.net/10948/4055 , vital:20508
- Description: Single Point Diamond Turning (SPDT) is a technology widely applied for the fabrication of contact lenses. One of the limiting factors in polymer machining is wear of the diamond tool due to electrostatic discharge resulting in poor surface quality of the machined products. The research work presented in this dissertation highlights the electrostatic properties of contact lenses during machining operations and the effects these properties have on the surface quality of the work piece materials. Two contact lens samples were experimented on, Definitive 74 (Silicone Hydrogel) and Tyro 97 (Rigid Gas Permeable). The electrostatic surface potentials (ESPs) were measured during turning operations using an electrostatic voltmeter and the surface roughness measurements were taken using a surface profilometer. Response Surface Methodology (RSM) techniques were employed to create predictive models for both surface roughness and ESPs with respect to the cutting speed, feed rate and depth of cut. Predictive surface roughness models were successfully generated for both materials and the cutting speed and feed rate were identified as the parameters with most effect on surface roughness. In addition, an electrostatic model was successfully generated for the Definitive 74 contact lens material which cited the cutting speed and feed rate as the most effective parameters on the material’s electrostatic behaviour. However, no relationship was evident between the machining parameters and electrostatic behaviour of Tyro 97.
- Full Text:
- Date Issued: 2015
Electrode surface modification using metallophthalocyanines and metal nanoparticles : electrocatalytic activity
- Authors: Maringa, Audacity
- Date: 2015
- Subjects: Phthalocyanines , Nanoparticles , Electrocatalysis , Scanning electron microscopy , X-ray photoelectron spectroscopy , Electrochemistry , Scanning electrochemical microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4541 , http://hdl.handle.net/10962/d1017921
- Description: Metallophthalocyanines and metal nanoparticles were successfully synthesized and applied for the electrooxidation of amitrole, nitrite and hydrazine individually or when employed together. The synthesized materials were characterized using the following techniques: predominantly scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning electrochemical microscopy (SECM). Different electrode modification methods were used to modify the glassy carbon substrates. The methods include adsorption, electrodeposition, electropolymerization and click chemistry. Modifying the glassy carbon substrate with MPc (electropolymerization) followed by metal nanoparticles (electrodeposition) or vice versa, made a hybrid modified surface that had efficient electron transfer. This was confirmed by electrochemical impedance studies with voltammetry measurements having lower detection potentials for the analytes. This work also describes for the first time the micropatterning of the glassy carbon substrate using the SECM tip. The substrate was electrografted with 4-azidobenzenediazonium salt and then the click reaction was performed using ethynylferrocene facilitated by Cu⁺ produced at the SECM tip. The SECM imaging was then used to show the clicked spot.
- Full Text:
- Date Issued: 2015
Eliciting and combining expert opinion : an overview and comparison of methods
- Authors: Chinyamakobvu, Mutsa Carole
- Date: 2015
- Subjects: Decision making -- Statistical methods , Expertise , Bayesian statistical decision theory , Statistical decision , Delphi method , Paired comparisons (Statistics)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5579 , http://hdl.handle.net/10962/d1017827
- Description: Decision makers have long relied on experts to inform their decision making. Expert judgment analysis is a way to elicit and combine the opinions of a group of experts to facilitate decision making. The use of expert judgment is most appropriate when there is a lack of data for obtaining reasonable statistical results. The experts are asked for advice by one or more decision makers who face a specific real decision problem. The decision makers are outside the group of experts and are jointly responsible and accountable for the decision and committed to finding solutions that everyone can live with. The emphasis is on the decision makers learning from the experts. The focus of this thesis is an overview and comparison of the various elicitation and combination methods available. These include the traditional committee method, the Delphi method, the paired comparisons method, the negative exponential model, Cooke’s classical model, the histogram technique, using the Dirichlet distribution in the case of a set of uncertain proportions which must sum to one, and the employment of overfitting. The supra Bayes approach, the determination of weights for the experts, and combining the opinions of experts where each opinion is associated with a confidence level that represents the expert’s conviction of his own judgment are also considered.
- Full Text:
- Date Issued: 2015
Empowerment of school governing bodies in selected schools, King William's Town education district
- Authors: Ronoti, Zamikhaya Sydwell
- Date: 2015
- Subjects: School boards -- South Africa -- Eastern Cape , School board members -- Training of -- South Africa -- Eastern Cape , School management and organization -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MPA
- Identifier: http://hdl.handle.net/10948/6585 , vital:21120
- Description: This study investigates the impact of school governing bodies (SGBs) empowerment on school governance in King William’s Town. The study focuses on SGBs challenges and plights, highlights the effects of their lack of empowerment and suggests the review of the election criteria used to elect SGBs who have the potential to be empowered. Furthermore, it explores the elements and methods of empowerment that can be utilised to empower SGBs and examines the difficulties SGBs experience in accounting for finances and formulating and implementing policies. The researcher makes recommendations on the empowerment of SGBs based on the findings of the study. It was necessary to review literature on empowerment and school governance to attain the research goals. Conflicts and the mismanagement of finances indicate a noticeable gap between South African Schools Act policy intention and policy practice. The majority of SGBs, particularly the parent component in rural and semi-urban areas, have low levels of education. As a result, it is difficult to empower members because they have little or no basic knowledge, skills and expertise with regard to school governance. The manner in which SGBs function and carry out their duties, roles and responsibilities indicates that SGBs received inadequate training. SGBs lack awareness of the regulations governing the appointment of educators, hence a number of disputes arise. The increasing number of disputes (both formal and informal) in respect of appointments and promotions results from misinterpretations of or variations in legislation governing appointments in schools as well as the competency or capacity of SGBs. To investigate this problem, interviews were used as the research instrument to gather data from eight participants from selected schools. The main finding is that the majority of the SGBs studied are incapable of being empowered due to low illiteracy levels of some members. Low levels of or no education, a lack of basic knowledge and skills and other factors, such as a lack of educational insight and the inaccessibility of information and resources due to the use of English as the medium in which SGBs are serviced, compound the problem. The quality of the empowerment workshops, which are 'one size fits all', have a marked effect on their efficiency.
- Full Text:
- Date Issued: 2015
Enablers for lean process sustainability within South African manufacturing industries
- Authors: Roth, Benlloyd Koekemoer
- Date: 2015
- Subjects: Lean manufacturing , Manufacturing processes , Process control
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: http://hdl.handle.net/10948/6591 , vital:21122
- Description: James Womack and his colleagues Daniel Jones and Daniel Roos changed the way western civilization approached manufacturing. In 1990, they published a book called ‘The Machine That Changed the World: The Story of Lean Production’. It was a concept that had slowly filtered from the east but had not made its mark on the manufacturing sector. The concept of lean, born out of the Japanese Toyota Manufacturing System, was first thought to be impossible to duplicate outside of Japan. Since Womack and company popularised this “new” way of producing goods and delivering services it spread across industries finding popularity in the medical, engineering, accounting and especially the manufacturing industries. Over the last few decades lean practices has been synonymous with efficiency, cost reduction, supply chain optimisation and innovative problem solving (Anvari Norzima, Rosnah, Hojjati and Ismail, 2010; Pieterse et al., 2010; Womack et al., 1990). Lean process implementation has been researched in abundance, as has failed attempts at lean implementation. The purpose of this study was to identify and assess enablers of lean sustainability in organisations where lean processes are already being implemented. The literature study found Organisational Culture, Leadership, Employee Engagement and Trade Unions participation as factors that contributed to successful lean implementations. The author developed a model to test Organisational Culture, Leadership, Employee Engagement and Trade Unions as enablers to sustain lean practices in organisations in South Africa’s manufacturing industries. The results proved that Organisational Culture, Leadership and Employee Engagement were considered enablers for lean sustainability. These three enablers have an interlinked relationship and together help sustainability. Lacking just one factor would surely result in unsustainable lean practices. The study was conducted in the quantitative paradigm, as the hypothesised relationship was statistically tested. The data was collected from a homogenous group via an email sent with a link to the questionnaire. The data was statistically analysed with Statistica software and Microsoft Excel.
- Full Text:
- Date Issued: 2015
Enabling and constraining factors in Zimbabwe's 3-3-3 teacher education curriculum model : the case of a secondary teacher education college
- Authors: Shava, Nosizo
- Date: 2015
- Subjects: Education -- Curricula -- Zimbabwe Teacher participation in curriculum planning -- Zimbabwe Teachers -- Training of -- Zimbabwe
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/5686 , vital:29362
- Description: This study offers an explanation of enabling and / or constraining factors in Zimbabwe‘s 3-3-3 secondary teacher education model for Post ‗O‘ Level Science. It is a theory driven study that derives its theoretical foundation from Roy Bhaskar‘s critical realism and Margaret Archer‘s morphogenetic approach to reality. The study therefore offers explanations about structural, cultural and agential influences that facilitate and / or hinder the 3-year program for Post ‗O‘ Level Science. This was a qualitative case study of one secondary teacher education college in Zimbabwe. Qualitative data were collected through interviews, focus group discussions and document analysis. One official from the Department of Teacher Education(DTE) at the University of Zimbabwe(UZ),the Principal, the Vice Principal and 10 lecturers from the studied college,3 Heads of Science department in secondary schools,3mentors and 5 groups of 10 and 11eleven student teachers participated in the study. The DTE Handbook (2012), vision and mission statements and core values of the Ministry of Higher and Tertiary Education Science and Technology Development (MHTESTD),DTE and the studied college, syllabuses, teaching practice reports, policy documents, external examining reports, College Academic Board (CAB) minutes, admission records, mark profiles and pass lists among other relevant documents complemented interview data. As a theory driven study, structural, cultural and agential influences were found to be enabling and / or constraining the model. The acute shortage of Science teachers in secondary schools and the few Post ‗A‘ Level Science graduates led to the re-introduction of the 3- year Post ‗O‘ Level Science program in secondary teacher education colleges. The bureaucratic structures in educational institutions, the In-Out-In structure, institutional structures such as the family, the University, the studied college, secondary schools, infrastructural facilities, material and financial resources, transport facilities and utilities such as water, electricity and the internet were established as some among other structural factors affecting the 3-3-3 model. Discourses held about the teaching profession, the vision, mission and core values of the MHTESTD,DTE and the studied college, beliefs about what Science teachers should learn, knowledge, skills, attitudes and values they should acquire and how they should be taught were established as cultural factors enabling and / or constraining the 3-3-3 model. Agential influences offering causal explanation for enablers and / or constrainers of the model were established as the decision by the Principal and the CAB to re-introduce the 3- year Post ‗O‘ Level Science program, the decision by the students to enroll for the program, the recruitment of under qualified students, the use of various teaching methods, conducting staff development and mentorship workshops and failure to increase staff establishment. The study has put forth recommendations for the improvement on constraining factors in pre-service teacher education programs. With the understanding that agency has power to reinforce or transform structures and cultures, it should not be seen to be reinforcing disadvantaged structural positions and cultures; instead, after having identified structural and cultural constrainers, it should engage in communicative and meta-reflexivity to come up with the best possible solutions to the hindrances. Courses of action should then be taken accordingly.
- Full Text:
- Date Issued: 2015
Enabling autism educators to identify and address challenges using participatory action research
- Authors: Kok, Mandie
- Date: 2015
- Subjects: Autistic children -- Education -- South Africa , Learning disabled children -- Education -- South Africa
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: http://hdl.handle.net/10948/7881 , vital:24318
- Description: Teachers in the field of autism education encounter multiple professional challenges in their roles as educators. Autism spectrum disorder presents with a broad range of symptoms, which places additional demands on the teacher expected to meet all the learners' needs. Insufficient teacher education and training, coupled with limited access to resources and a lack of support from the Department of Basic Education can lead to teachers feeling overwhelmed and powerless to adequately address work-related challenges. This study employed a participatory action research methodology and sought to identify challenges and develop solutions in the field of autism education. Furthermore, the goal of this study was to find ways of making use of existing resources to better meet the teachers' needs, as well as reconsidering the classroom environment in order to better meet the learners' needs. The cyclical nature of a participatory action research approach allowed the participants to renegotiate the research goals throughout the study. Data were generated through the use of open-ended group interviews, observation and written critical self-reflections. From the data, six themes emerged. First, the participants reported feeling empowered as a result of creating and sharing their personal reflections. Next, they identified the lack of support for teachers as a professional challenge. The participants also indicated that more flexible teaching strategies were required in the field of autism education. Another challenge was that teachers were uncertain of their legal rights within the field of ASD education. Poor communication between parents and teachers was identified as an important issue. Finally, it emerged that the classroom environment had a significant impact on the learners' behaviour. These findings led to the conclusion that teachers in the field of autism education should be supported and the challenges they face acknowledged and addressed by their employers as well as by the Department of Basic Education and the institutions responsible for educating and training new teachers. Finally, recommendations for possible solutions and further research were presented, based on the data generated during the study.
- Full Text:
- Date Issued: 2015
Enantioselective transformations using tetrol as a chiral mediator
- Authors: Dorfling, Sasha-Lee
- Date: 2015
- Subjects: Enantioselective catalysis , Trichothecenes , Catalysts , Titanium
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10445 , http://hdl.handle.net/10948/d1021195
- Description: (+)-(2R,3R)-1,1,4,4-Tetraphenylbutane-1,2,3,4-tetraol (TETROL) and its derivatives were reacted with varying molar ratios of titanium isopropoxide (2:1, 1:1 and 1:2 tetraol:titanium isopropoxide) in an attempt to prepare potential titanium-based tetraol catalysts for enantioselective transformations. In each case, infrared and HNMR spectra suggested that the product was formed. We tentatively proposed that the structure of the catalyst was a spiro-type, but we could not determine conclusively what its exact structure was, despite using numerous techniques at our disposal (molecular modelling calculations, H NMR and IR spectroscopy, thermal analyses, powder diffraction, and single crystal X-ray diffraction). The catalyst and derivatives thereof were able to act catalytically for the enantioselective additions of diethylzinc compounds to aldehydes. The effects of temperature and solvent were investigated, and toluene and -78 °C were selected as optimal from the results obtained. (The reaction could, however, not be maintained at this low temperature for extended periods due to the fact that we did not have, at our disposal, the correct equipment. Each 16 h reaction was thus allowed to reach room temperature in each case.) The selectivity for the product 1-phenylpropan-1-ol (when benzaldehyde was the starting aldehyde) varied depending on the nature of the aryl substituents of the titanium-based catalyst. Using 0.2 molar equivalents of the chiral titanates, the highest selectivity was 42 percent (e.e.), but only when excess Ti(O-i-Pr)4 had been added to the reaction mixture. This was achieved with the tetra(ortho-methoxyphenyl)-TETROLate derivative. TETROL and its derivatives were also successful in metal-free catalysis where higher conversions and selectivities were observed, compared to when these were complexed to titanium. The highest selectivity was 70 percent (e.e.), achieved with the tetra(ortho-methylphenyl)TETROL derivative.
- Full Text:
- Date Issued: 2015
Encouraging individual retirement savings in South Africa
- Authors: Hirschbeck, Lisa
- Date: 2015
- Subjects: Retirement income -- Planning-- South Africa , Retirement income -- Government policy -- South Africa , Pension trusts -- South Africa -- Management , Pension trusts -- Termination -- Law and legislation -- South Africa , Income tax deductions for retirement contributions -- South Africa
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: vital:913 , http://hdl.handle.net/10962/d1017535
- Description: Many South Africans may not have adequate retirement savings when they retire and this has the effect of a low income replacement ratio on retirement that may lead to a decrease in the standard of living of the retiree and in extreme cases the retiree becoming dependent on their family and the government. Owing to this trend of no or inadequate retirement savings, South Africa embarked on a retirement reform journey in 2004. The goal of this research is to determine whether the retirement reform mechanisms outlined by National Treasury would encourage individual retirement savings that should assist South Africans to achieve stability of income in their retirement. This research analysed the current retirement savings options and vehicles available for South Africans, the current tax incentives and disincentives and reviewed the proposed changes to tax incentives and disincentives during the accumulation phase of retirement savings and explained how these proposed tax incentives are harmonised for the accumulation phase of retirement. The research explained how National Treasury aims to limit pre-retirement withdrawals and how it intends to encourage the annuitisation of post-retirement benefits. The penultimate chapter of this research measured the effect (by making certain assumptions) of the changes proposed by National Treasury on the income replacement ratio of the retiree. Throughout the research comparisons were made between The OECD Roadmap for the good design of defined contribution pension plans and National Treasury’s proposals. This research did not directly address the effect of increased life expectancies on retirement savings or increases in youth unemployment and the effect that this may have on retirement savings. The effect of financial charges levied on retirement savings on the income replacement ratio of a retiree was also not explored. Furthermore, not all pension funds are regulated by the Pension Funds Act and how these pension funds can be brought within the purview of the Pension Funds Act was not investigated. Automatic enrolment of retirement savings for all employees in South Africa in retirement vehicles is a further research area that could be addressed.
- Full Text:
- Date Issued: 2015
Engaging within zones of proximal development on Facebook : the case of using Facebook to support learning and mentoring on a NQF Level 5 environmental education, training and development practices learnership
- Authors: Chetty, Preven
- Date: 2015
- Subjects: Social media -- Study and teaching (Higher) -- South Africa , Internet in education , Online social networks , Organizational learning , Employees -- Training of , Group work in education
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: vital:2024 , http://hdl.handle.net/10962/d1017335
- Description: This study focuses on two roll-outs of a, year-long National Qualification Framework (NQF) level 5, environmental education learnership in South Africa and attempts at enhancing collaborative learning at workplaces using a familiar social networking site called Facebook. This study uses the Facebook group sites created for the workplace course component of the course as one of the means of data collection. Additional interviews and focus groups with learners and administrators on both Environmental Education Training and Development Practices (EETDP) courses also informed the study. The study is located within the context of the rise of the information age, its effects on socio-ecological landscape at large and ways of using social networking sites in order to facilitate scaffolding and meaning making within zones of proximal development for environmental education learnerships. It also looks at the model of apprenticeship and workplace based learning as it is broadly located at the nexus of the SAQA-led academic inquiry into workplace based learning and professional development. It was found that the use of Facebook on the EETDP learnership allowed for collaborative learning to take place between peer to peer interactions as well as between tutors and learners. It was also noted that scaffolding processes requires both technical assistance and strong instructional input from course tutors. One of the most important findings in terms of collaborative learning and engaging within the Zone of Proximal Development (ZPD) was that learners were able to communicate more effectively and freely with both fellow learners and tutors on course after participating on the Facebook group sites. The study offers recommendations on how a social networking platform like Facebook can be utilised effectively for environmental education. The study recommends that scaffolding of workplace based tasks and concepts needs to be better integrated with the course and in both online and offline interactions between learners. It also illustrates how social networking sites can become powerful tools for creating meaning making when combined with course work.
- Full Text:
- Date Issued: 2015
Enhancing project success using an organisational architecture approach
- Authors: Jonker, Martin
- Date: 2015
- Subjects: Project management , Strategic planning
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: http://hdl.handle.net/10948/4101 , vital:20512
- Description: Poor project performance creates a dilemma for managers in both the public and private sectors. Much research has been conducted on project success, but the relationship between organisational architecture and project success has not been fully explored. This led to the main research question of the study, which was: How can project success be better explained and understood from the perspective of organisational architecture theory? A literature review was conducted on the nature of projects, the project environment, and how project success can be defined and measured, including a discussion on success criteria and critical success factors. Organisational architecture was broken down into its core components. These components were further categorised into structural, operational or procedural, and behavioural (culture, motivation and leadership) components after which literature within each of these components were analysed and discussed. The study used a positivistic paradigm and collected quantitative data that was statistically analysed. An electronic questionnaire was successfully launched and distributed via an email link, which worked through the Nelson Mandela Metropolitan University (NMMU) web survey system. This was done within the framework of built environment projects that are typically implemented through partnerships between the public and private sector. A satisfactory response rate was obtained from built environment professionals in South Africa to allow inference of the sample results to the population. The following hypotheses were tested in this study: H1.1: The perception of South African built environment professionals is that there is a significant relationship between organisational structure and project success. H1.2: The perception of South African built environment professionals is that there is a significant relationship between the use and application of traditional operations management tools and techniques and project success. H1.3: The perception of South African built environment professionals is that there is a significant relationship between organisational culture and project success. H1.4: The perception of South African built environment professionals is that there is a significant relationship between motivation and project success. H1.5: The perception of South African built environment professionals is that there is a significant relationship between leadership and project success. An analysis of the survey results revealed that, according to South African built environment professionals, there is an overall significant relationship between organisational architecture and project success. Following an overview of the main findings, an Organisational Architecture – Project Success (OAPS) framework was presented as a recommendation of how to better explain and understand the relationship between organisational architecture and project success.
- Full Text:
- Date Issued: 2015
Enhancing public participation in the integrated development planning process: a case of Buffalo City Metropolitan Municipality
- Authors: Yekani, Babalo
- Date: 2015
- Subjects: Public administration -- Planning , Local government -- South Africa -- Eastern Cape -- Citizen participation , Municipal services -- South Africa -- Eastern Cape -- Citizen participation
- Language: English
- Type: Thesis , Masters , MPA
- Identifier: http://hdl.handle.net/10948/8989 , vital:26453
- Description: The aim of the study is to investigate effective strategies and processes for public participation in the IDP process in the Buffalo City Metropolitan Municipality. A qualitative study was undertaken and literature review on public participation in terms of the Integrated Development Planning was conducted. Relevant secondary data was sourced and structured interviews were conducted with three (3) ward councillors in the Buffalo City Metropolitan Municipal. Focus group interviews were also conducted with ward committee members from three (3) wards in the Buffalo City Metropolitan Municipality. The findings of this research indicate that ward councilors have limited information on administrative processes. This could lead to ward councillors not be able to provide feedback on various service delivery issues and the progress of the municipal projects. Also ward councillors may not be able to influence public participation if they do not understand their role in administrative processes such as monitoring implementation of council decisions and policies. Ward councillors have no influence on the Integrated Development Planning especially the cost and budget estimates for municipal projects which are intended to benefit the members of the community. On the basis of the key findings, recommendations were made that ward committees should be empowered to deal with the complex developments in the Integrated Development Planning process and ward councillors should play a leading role in the Integrated Development Planning process.
- Full Text:
- Date Issued: 2015
Entrepreneurial intention among Rhodes University undergraduate students
- Authors: Bell, Jonathan Andrew
- Date: 2015
- Subjects: Rhodes University -- Undergraduates , Entrepreneurship -- South Africa -- Grahamstown , Social cognitive theory , Intention , Attitude (Psychology) , Influence (Psychology) , South Africa -- Economic conditions -- 1991-
- Language: English
- Type: Thesis , Masters , MSocSc
- Identifier: vital:3267 , http://hdl.handle.net/10962/d1020011
- Description: The entrepreneurial intentions of university students are important factors to consider when developing entrepreneurship offerings at tertiary level institutions. This research study reports on pertinent findings from a study which set out to determine Rhodes university undergraduate students‟ entrepreneurial intentions and their pull and push factors that have brought them to the decision to become entrepreneurs. A survey, using a 43 question structured web-based instrument was used to capture the responses from undergraduate students across different departments at Rhodes University, Grahamstown. Key findings suggest that few undergraduate students intend to enter into an entrepreneurship career immediately after completion of their studies, whereas many of the respondents were more interested in doing so five years after graduation. The vast majority of students were satisfied without having formal entrepreneurial education and factors such as previous employment in entrepreneurial activities, and family influence had a statistical significant relationship with entrepreneurial intention.
- Full Text:
- Date Issued: 2015
Environmental citizenship in citizen science: a case study of a volunteer toad conservation group in Noordhoek, South Africa
- Authors: Van Wyk, Sheraine Maud
- Date: 2015
- Subjects: Toad NUTS (Noordhoek, South Africa) , Environmental education -- South Africa -- Noordhoek , Environmental education -- Citizen participation , Social learning -- South Africa -- Noordhoek , Toads -- Conservation -- South Africa -- Noordhoek , Toads -- Conservation -- Citizen participation
- Language: English
- Type: Thesis , Masters , MEd
- Identifier: vital:2048 , http://hdl.handle.net/10962/d1017359
- Description: The endangered Western Leopard Toad (Amietophrynus pantherinus) is endemic to the winter-rainfall parts of the Western Cape, areas which are also favoured for human settlement. Residents in the Noordhoek area witnessed many toads being killed on roads during their annual migration to breeding ponds. Concerned citizens mobilised a volunteer group to mitigate this threat to the species. Toad NUTS (Noordhoek Unpaid Toad Savers), a well-established and successful citizen science group is explored as a case study of how environmental citizenship emerges in a citizen science group. This research has three research goals. Firstly to probe the enabling and constraining factors shaping the Toad NUTS practices, secondly to investigate the learning dynamics in the citizen science group and thirdly to understand how participation in citizen science develops environmental citizenship. Practice architectures theory (Kemmis & Grootenboer, 2008) was used to explore how cultural-discursive, economic-material and social-political arrangements shape the practices of the Toad NUTS group. The Toad NUTS group was identified as a community of practice, therefore Lave and Wenger’s (1991) communities of practice theory was used to better understand the social learning processes within the group. The Global Citizenship Education international policy document was used to capture the aims of citizenship education as it relates to environmental issues and identifies the competencies that citizenship education initiatives should develop. The practices of the Toad NUTS group were investigated for evidence of the goals and competencies identified in the Global Citizenship Education policy documents of environmental citizenship. Data was generated through documentary research, surveys, a questionnaire, semi-structured interviews and observations. The data was stored, organised and analysed using NVivo data management software in three phases corresponding to the three research goals. With respect to Goal 1, the evidence suggested that there are various shaping arrangements of cultural-discursive, material-economic and social-political configurations which influence Toad NUTS practices. Volunteers must learn to navigate these arrangements in order to successfully implement conservation strategies. The shaping features identified were the WhatsApp group communication system used by volunteers; public awareness and education strategies; equipment, material and funding required for implementing the group’s practices; power balances and exchanges between stakeholders in the conservation field; bureaucratic processes and scientist-lay person exchanges. Very important for facilitating social-political connections to various stakeholders, is the membership Toad NUTS enjoys on the Western Leopard Toad Conservation Committee. With respect to Goal 2, four interconnected components of learning were investigated. These were: learning as belonging, learning as doing, learning as meaning-making experience and learning as becoming. Members learn by doing things together like training, patrolling and deliberating problems in the field. They learn by exploring what is collectively known from past and unfolding experiences. Evidence showed that learning deepens as Toad NUTS members perceive their praxis as meaningful and their identities evolve as their knowledge and experience grows. This strengthens members’ sense of belonging and identification with the Toad NUTS group. In time the group develops a reputation and the wider community acknowledges the expertise and knowledge that resides with the group. With respect to Goal 3, it was found that volunteers who have a predisposition for environmental citizenship are more likely to join a citizen science group. Although volunteers care about nature and want to make a difference, it is after gaining access to the embedded knowledge and knowledge processes of the citizen science group that they realise meaningful sustainable solutions to the issue(s) that the project is concerned with. It was found that knowledge paired with reasoned practice enables the agency of volunteers to bring about positive and meaningful change in the local environment. If facilitated carefully, citizen science can make positive contributions to the field, in this instance, conservation, while allowing volunteers to exercise environmental citizenship engaging in participative governance with regard to the project.
- Full Text:
- Date Issued: 2015
Environmental conflict resolution: a critical analysis of the role of interests and value
- Authors: Mweshi, John
- Date: 2015
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/55842 , vital:26740
- Description: This thesis intends to contribute to an enhanced understanding of environmental conflicts and their resolution. To accomplish this task the thesis will ascertain the role that value and interests play in environmental conflicts in order to establish an adequate basis upon which they can be resolved. In the process, the thesis will also examine three different approaches, namely, the Standard Approach; the Environmental Impact Assessment (EIA) framework; and the Structured Decision Making (SDM) approach. First, the standard approach is informed by the understanding that focusing on interests instead of human values makes the resolution of conflicts more tractable. In contrast, this thesis argues that an exclusive focus on interests, in the context of environmental conflict resolution, is inadequate in some important respects because there are other factors to be considered such as the environmental impacts at the root of the conflict. Second, the thesis examines the focus on impacts that characterises EIAs. It argues that this approach remedies the limitations of the standard approach insofar as impacts are understood in terms of object value. However, the EIA approach does not provide much guidance on how to deal with conflicting human values. Third, taking into account the fact that the standard approach does not address the question of object value, while the EIA addresses object value but does not deal directly with human values, the thesis examines the SDM approach to environmental risk decisions. The thesis argues that while the SDM approach claims to deal with conflicts involving human values head-on, it does not provide a viable alternative in terms of environmental conflict resolution. This is because it fails to recognise the key distinction between human values and object value despite acknowledging the presence of multiple value dimensions as a major obstacle to value trade-offs and therefore to the resolution of value conflicts. Finally, the thesis recommends an adequate basis upon which environmental conflicts can be resolved.
- Full Text:
- Date Issued: 2015