Characterization and application of phthalocyanine-gold nanoparticle conjugates
- Authors: Tombe, Sekai Lana
- Date: 2013
- Subjects: Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4293 , http://hdl.handle.net/10962/d1004517 , Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Description: This work presents the syntheses, photophysical and photochemical characterization of arylthio zinc phthalocyanines and their gold nanoparticle conjugates. Spectroscopic and microscopic studies confirmed the formation of the phthalocyanine-gold nanoparticle conjugates which exhibited enhanced photophysicochemical properties in comparison to the phthalocyanines. The studies showed that the presence of gold nanoparticles significantly lowered fluorescence quantum yields and lifetimes. However, this interaction did not restrict the formation of excited singlet and triplet states and hence the formation of singlet oxygen required for photocatalysis. The conjugates showed significantly higher singlet oxygen quantum yields and therefore enhanced photocatalytic activity compared to the phthalocyanines. The zinc phthalocyanines and their gold nanoparticle conjugates were successfully incorporated into electrospun polymer fibers. Spectral characteristics of the functionalized electrospun fibers indicated that the phthalocyanines and phthalocyanine-gold nanoparticle conjugates were bound and their integrity was maintained within the polymeric fiber matrices. The photophysical and photochemical properties of the complexes were equally maintained within the electrospun fibers. The functionalized fibers were applied for the photoconversion of 4-chlorophenol and Orange G as model organic pollutants. , Microsoft� Word 2010 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
- Authors: Tombe, Sekai Lana
- Date: 2013
- Subjects: Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4293 , http://hdl.handle.net/10962/d1004517 , Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Description: This work presents the syntheses, photophysical and photochemical characterization of arylthio zinc phthalocyanines and their gold nanoparticle conjugates. Spectroscopic and microscopic studies confirmed the formation of the phthalocyanine-gold nanoparticle conjugates which exhibited enhanced photophysicochemical properties in comparison to the phthalocyanines. The studies showed that the presence of gold nanoparticles significantly lowered fluorescence quantum yields and lifetimes. However, this interaction did not restrict the formation of excited singlet and triplet states and hence the formation of singlet oxygen required for photocatalysis. The conjugates showed significantly higher singlet oxygen quantum yields and therefore enhanced photocatalytic activity compared to the phthalocyanines. The zinc phthalocyanines and their gold nanoparticle conjugates were successfully incorporated into electrospun polymer fibers. Spectral characteristics of the functionalized electrospun fibers indicated that the phthalocyanines and phthalocyanine-gold nanoparticle conjugates were bound and their integrity was maintained within the polymeric fiber matrices. The photophysical and photochemical properties of the complexes were equally maintained within the electrospun fibers. The functionalized fibers were applied for the photoconversion of 4-chlorophenol and Orange G as model organic pollutants. , Microsoft� Word 2010 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
Photophysicochemical and photodynamic antimicrobial chemotherapeutic studies of novel phthalocyanines conjugated to silver nanoparticles
- Authors: Rapulenyane, Nomasonto
- Date: 2013 , 2013-06-10
- Subjects: Phthalocyanines , Photochemistry , Photochemotherapy , Cancer -- Photochemotherapy , Anti-infective agents , Escherichia coli , Nanoparticles , Silver , Zinc
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4291 , http://hdl.handle.net/10962/d1003912 , Phthalocyanines , Photochemistry , Photochemotherapy , Cancer -- Photochemotherapy , Anti-infective agents , Escherichia coli , Nanoparticles , Silver , Zinc
- Description: This work reports on the synthesis, characterization and the physicochemical properties of novel unsymmetrically substituted zinc phthalocyanines: namely tris{11,19, 27-(1,2- diethylaminoethylthiol)-2-(captopril) phthalocyanine Zn ((ZnMCapPc (1.5)), hexakis{8,11,16,19,42,27-(octylthio)-1-(4-phenoxycarboxy) phthalocyanine} Zn (ZnMPCPc(1.7)) and Tris {11, 19, 27-(1,2-diethylaminoethylthiol)-1,2(caffeic acid) phthalocyanine} Zn ((ZnMCafPc (1.3)). Symmetrically substituted counterparts (tetrakis(diethylamino)zinc phthalocyaninato (3.8), octakis(octylthio)zinc phthalocyaninato (3.9) and tetrakis (carboxyphenoxy)zinc phthalocyaninato (3.10) complexes) were also synthesized for comparison of the photophysicochemical properties and to investigate the effect of the substituents on the low symmetry Pcs. The complexes were successfully characterized by IR, NMR, mass spectral and elemental analyses. All the complexes showed the ability to produce singlet oxygen, while the highest triplet quantum yields were obtained for 1.7, 1.5 and 3.9 (0.80, 0.65 and 0.62 respectively and the lowest were obtained for 1.3 and 3.10 (0.57 and 0.47 respectively). High triplet lifetimes (109-286 μs) were also obtained for all complexes, with 1.7 being the highest (286 μs) which also corresponds to its triplet and singlet quantum yields (0.80 and 0.77 respectively). The photosensitizing properties of low symmetry derivatives, ZnMCapPc and ZnMCafPc were investigated by conjugating glutathione (GSH) capped silver nanoparticles (AgNP). The formation of the amide bond was confirmed by IR and UV-Vis spectroscopies. The photophysicochemical behaviour of the novel phthalocyanine-GSH-AgNP conjugates and the simple mixture of the Ag NPs with low the symmetry phthalocyanines were investigated. It was observed that upon conjugation of the phthalocyanines to the GSH-AgNPs, a blue shift in the Q band was induced. The triplet lifetimes and quantum yields improved upon conjugation as compared to the phthalocyanines (Pc) alone. Complex 1.5 triplet lifetimes increased from 109 to 148 and triplet quantum yield from 0.65 to 0.86 upon conjugation. Fluorescence lifetimes and quantum yields decreased for the conjugates compared to the phthalocyanines alone, due to the quenching caused by the Ag NPs. The antimicrobial activity of the zinc phthalocyanines (complexes 1.3 and 1.5) and their conjugates against Escherichia coli was investigated. Only 1.3 and 1.5 complexes were investigated because of the availability of the sample. In general phthalocyanines showed increase in antibacterial activity with the increase in phthalocyanines concentration in the presence and absence of light. The Pc complexes and their Ag NP conjugates showed an increase in antibacterial activity, due to the synergistic effect afforded by Ag NP and Pcs. Improved antibacterial properties were obtained upon irradiation. 1.5-AgNPs had the highest antibacterial activity compared to 1.3-AgNPs conjugate; these results are in agreement with the photophysical behaviour. This work demonstrates improved photophysicochemical properties of low symm
- Full Text:
- Date Issued: 2013
- Authors: Rapulenyane, Nomasonto
- Date: 2013 , 2013-06-10
- Subjects: Phthalocyanines , Photochemistry , Photochemotherapy , Cancer -- Photochemotherapy , Anti-infective agents , Escherichia coli , Nanoparticles , Silver , Zinc
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4291 , http://hdl.handle.net/10962/d1003912 , Phthalocyanines , Photochemistry , Photochemotherapy , Cancer -- Photochemotherapy , Anti-infective agents , Escherichia coli , Nanoparticles , Silver , Zinc
- Description: This work reports on the synthesis, characterization and the physicochemical properties of novel unsymmetrically substituted zinc phthalocyanines: namely tris{11,19, 27-(1,2- diethylaminoethylthiol)-2-(captopril) phthalocyanine Zn ((ZnMCapPc (1.5)), hexakis{8,11,16,19,42,27-(octylthio)-1-(4-phenoxycarboxy) phthalocyanine} Zn (ZnMPCPc(1.7)) and Tris {11, 19, 27-(1,2-diethylaminoethylthiol)-1,2(caffeic acid) phthalocyanine} Zn ((ZnMCafPc (1.3)). Symmetrically substituted counterparts (tetrakis(diethylamino)zinc phthalocyaninato (3.8), octakis(octylthio)zinc phthalocyaninato (3.9) and tetrakis (carboxyphenoxy)zinc phthalocyaninato (3.10) complexes) were also synthesized for comparison of the photophysicochemical properties and to investigate the effect of the substituents on the low symmetry Pcs. The complexes were successfully characterized by IR, NMR, mass spectral and elemental analyses. All the complexes showed the ability to produce singlet oxygen, while the highest triplet quantum yields were obtained for 1.7, 1.5 and 3.9 (0.80, 0.65 and 0.62 respectively and the lowest were obtained for 1.3 and 3.10 (0.57 and 0.47 respectively). High triplet lifetimes (109-286 μs) were also obtained for all complexes, with 1.7 being the highest (286 μs) which also corresponds to its triplet and singlet quantum yields (0.80 and 0.77 respectively). The photosensitizing properties of low symmetry derivatives, ZnMCapPc and ZnMCafPc were investigated by conjugating glutathione (GSH) capped silver nanoparticles (AgNP). The formation of the amide bond was confirmed by IR and UV-Vis spectroscopies. The photophysicochemical behaviour of the novel phthalocyanine-GSH-AgNP conjugates and the simple mixture of the Ag NPs with low the symmetry phthalocyanines were investigated. It was observed that upon conjugation of the phthalocyanines to the GSH-AgNPs, a blue shift in the Q band was induced. The triplet lifetimes and quantum yields improved upon conjugation as compared to the phthalocyanines (Pc) alone. Complex 1.5 triplet lifetimes increased from 109 to 148 and triplet quantum yield from 0.65 to 0.86 upon conjugation. Fluorescence lifetimes and quantum yields decreased for the conjugates compared to the phthalocyanines alone, due to the quenching caused by the Ag NPs. The antimicrobial activity of the zinc phthalocyanines (complexes 1.3 and 1.5) and their conjugates against Escherichia coli was investigated. Only 1.3 and 1.5 complexes were investigated because of the availability of the sample. In general phthalocyanines showed increase in antibacterial activity with the increase in phthalocyanines concentration in the presence and absence of light. The Pc complexes and their Ag NP conjugates showed an increase in antibacterial activity, due to the synergistic effect afforded by Ag NP and Pcs. Improved antibacterial properties were obtained upon irradiation. 1.5-AgNPs had the highest antibacterial activity compared to 1.3-AgNPs conjugate; these results are in agreement with the photophysical behaviour. This work demonstrates improved photophysicochemical properties of low symm
- Full Text:
- Date Issued: 2013
Photophysicochemical properties of aluminium phthalocyanine-platinum conjugates
- Authors: Malinga, Nduduzo Nkanyiso
- Date: 2013 , 2013-04-05
- Subjects: Phthalocyanines , Photochemistry , Photochemotherapy , Aluminium , Platinum , Nanoparticles , Cancer -- Photochemotherapy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4285 , http://hdl.handle.net/10962/d1002954 , Phthalocyanines , Photochemistry , Photochemotherapy , Aluminium , Platinum , Nanoparticles , Cancer -- Photochemotherapy
- Description: The combination of chemotherapy and photodynamic therapy was investigated by synthesis and characterization of octacarboxy phthalocyanine covalent conjugates with platinum complexes. This work presents the synthesis, characterization and photophysicochemical properties of aluminium (diaquaplatinum) octacarboxyphthalocyanine and aluminium (diammine) octacarboxyphthalocyanine. The conjugates were prepared by conjugating aluminium octacarboxy phthalocyanine with potassium tetrachloro platinate to yield aluminium tetrakis and trikis (diaquaplatinum) octacarboxy phthalocyanine. The aluminium octacarboxy phthalocyanine was also conjugated with cis-diamminedichloroplatinum to yield aluminium bis and tris (diaquaplatinum) octacarboxy phthalocyanine. From the characterization of the conjugates it was discovered that the aluminium (diaquaplatinum) octacarboxy phthalocyanine had formed platinum nanoparticles with the Pc acting as a capping agent. The triplet lifetimes decreased with the increasing number of platinum complexesconjugated to the Pc. The heavy atom effect improved the overall photophysicochemical properties.
- Full Text:
- Date Issued: 2013
- Authors: Malinga, Nduduzo Nkanyiso
- Date: 2013 , 2013-04-05
- Subjects: Phthalocyanines , Photochemistry , Photochemotherapy , Aluminium , Platinum , Nanoparticles , Cancer -- Photochemotherapy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4285 , http://hdl.handle.net/10962/d1002954 , Phthalocyanines , Photochemistry , Photochemotherapy , Aluminium , Platinum , Nanoparticles , Cancer -- Photochemotherapy
- Description: The combination of chemotherapy and photodynamic therapy was investigated by synthesis and characterization of octacarboxy phthalocyanine covalent conjugates with platinum complexes. This work presents the synthesis, characterization and photophysicochemical properties of aluminium (diaquaplatinum) octacarboxyphthalocyanine and aluminium (diammine) octacarboxyphthalocyanine. The conjugates were prepared by conjugating aluminium octacarboxy phthalocyanine with potassium tetrachloro platinate to yield aluminium tetrakis and trikis (diaquaplatinum) octacarboxy phthalocyanine. The aluminium octacarboxy phthalocyanine was also conjugated with cis-diamminedichloroplatinum to yield aluminium bis and tris (diaquaplatinum) octacarboxy phthalocyanine. From the characterization of the conjugates it was discovered that the aluminium (diaquaplatinum) octacarboxy phthalocyanine had formed platinum nanoparticles with the Pc acting as a capping agent. The triplet lifetimes decreased with the increasing number of platinum complexesconjugated to the Pc. The heavy atom effect improved the overall photophysicochemical properties.
- Full Text:
- Date Issued: 2013
The development of platinum and palladium-selective polymeric materials
- Authors: Fayemi, Omolola Esther
- Date: 2013 , 2013-05-03
- Subjects: Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4287 , http://hdl.handle.net/10962/d1002964 , Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species (PtCl₆²⁻ and PdCl₄²⁻) on polystyrene-based beads and nanofibers as well as silica microparticles functionalized with polyamine centres derived from ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) is described. The functionalized sorbent materials were characterized by using microanalysis, SEM, XPS, BET and FTIR. The nanofiber sorbent material functionalized with ethylenediamine (F-EDA) had the highest loading capacity which was attributed to its high nitrogen content (10.83%) and larger surface area (241.3m²/g). The adsorption and loading capacities of the sorption materials were investigated using both the batch and column studies in 1 M HCI. The adsorption studies for both PtCl₆²⁻ and PdCl₄²⁻ on the polystyrene-based sorbent materials fit the Langmuir isotherm while the silica-based sorbents fitted the Freundlich isotherm with R² values > 0.99. In the column experiment the highest loading capacity of Pt and Pd were 7.4 mg/g and 4.3 mg/g respectively on the nanofiber sorbent material based on ethylenediamine (EDA). The polystyrene and silica-based resins with triethylenetetramine (TETA) functionality (M-TETA and S-TETA) showed selectivity for platinum and palladium, respectively. Metal chlorido complexes loaded on the sorbent materials were recovered by using 3% m/v thiourea solution as teh eluting agent with quantitative desorption efficiency under the selected experimental conditions. The separation of platinum from palladium was partially achieved by selective stripping of PtCl₆²⁻ with 0.5 M of NaClO₄ in 1.0 M HCI with PdCl₄²⁻ was eluted with 0.5 M thiourea in 1.0 M HCI. The selectivity of the M-TETA and S-TETA sorbent materials was proved by column separation of platinum(IV) and palladium(II), respectively, from synthetic solutions containing iridium(IV) and rhodium(III). The loading capacity for platinum on M-TETA was 0.09 mg/g while it was 0.27 mg/g for palladium on S-TETA. , Acrobat PDFMaker 10.1 for Word , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
- Authors: Fayemi, Omolola Esther
- Date: 2013 , 2013-05-03
- Subjects: Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4287 , http://hdl.handle.net/10962/d1002964 , Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species (PtCl₆²⁻ and PdCl₄²⁻) on polystyrene-based beads and nanofibers as well as silica microparticles functionalized with polyamine centres derived from ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) is described. The functionalized sorbent materials were characterized by using microanalysis, SEM, XPS, BET and FTIR. The nanofiber sorbent material functionalized with ethylenediamine (F-EDA) had the highest loading capacity which was attributed to its high nitrogen content (10.83%) and larger surface area (241.3m²/g). The adsorption and loading capacities of the sorption materials were investigated using both the batch and column studies in 1 M HCI. The adsorption studies for both PtCl₆²⁻ and PdCl₄²⁻ on the polystyrene-based sorbent materials fit the Langmuir isotherm while the silica-based sorbents fitted the Freundlich isotherm with R² values > 0.99. In the column experiment the highest loading capacity of Pt and Pd were 7.4 mg/g and 4.3 mg/g respectively on the nanofiber sorbent material based on ethylenediamine (EDA). The polystyrene and silica-based resins with triethylenetetramine (TETA) functionality (M-TETA and S-TETA) showed selectivity for platinum and palladium, respectively. Metal chlorido complexes loaded on the sorbent materials were recovered by using 3% m/v thiourea solution as teh eluting agent with quantitative desorption efficiency under the selected experimental conditions. The separation of platinum from palladium was partially achieved by selective stripping of PtCl₆²⁻ with 0.5 M of NaClO₄ in 1.0 M HCI with PdCl₄²⁻ was eluted with 0.5 M thiourea in 1.0 M HCI. The selectivity of the M-TETA and S-TETA sorbent materials was proved by column separation of platinum(IV) and palladium(II), respectively, from synthetic solutions containing iridium(IV) and rhodium(III). The loading capacity for platinum on M-TETA was 0.09 mg/g while it was 0.27 mg/g for palladium on S-TETA. , Acrobat PDFMaker 10.1 for Word , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
Photophysicochemical studies of phenylthio phthalocyanines interaction with gold nanoparticles and applications in dye sensitised solar cells and optical limiting
- Authors: Forteath, Shaun
- Date: 2012
- Subjects: Phthalocyanines , Nanoparticles , Photochemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4334 , http://hdl.handle.net/10962/d1004995 , Phthalocyanines , Nanoparticles , Photochemistry
- Description: The syntheses, spectroscopic characterisation, photophysical and photochemical studies have been conducted for a variety of phenylthio substituted phthalocyanines (Pcs). Comparisons have been made taking into consideration the influence of the central metal ion, solvent properties and substituent type. The optical limiting properties were also determined for all the Pcs synthesised. A low-symmetry metallophthalocyanine complex was similarly characterised and the photoelectrochemical parameters determined when used as a sensitiser of nanoporous ZnO. The symmetric analogue was conjugated to gold nanoparticles to determine the influence of interactions on its photophysical properties and distinct differences occurred in the absorption and fluorescence spectra suggesting successful formation of conjugates.
- Full Text:
- Date Issued: 2012
- Authors: Forteath, Shaun
- Date: 2012
- Subjects: Phthalocyanines , Nanoparticles , Photochemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4334 , http://hdl.handle.net/10962/d1004995 , Phthalocyanines , Nanoparticles , Photochemistry
- Description: The syntheses, spectroscopic characterisation, photophysical and photochemical studies have been conducted for a variety of phenylthio substituted phthalocyanines (Pcs). Comparisons have been made taking into consideration the influence of the central metal ion, solvent properties and substituent type. The optical limiting properties were also determined for all the Pcs synthesised. A low-symmetry metallophthalocyanine complex was similarly characterised and the photoelectrochemical parameters determined when used as a sensitiser of nanoporous ZnO. The symmetric analogue was conjugated to gold nanoparticles to determine the influence of interactions on its photophysical properties and distinct differences occurred in the absorption and fluorescence spectra suggesting successful formation of conjugates.
- Full Text:
- Date Issued: 2012
Preparation of photocatalytic TiO₂ nanoparticles immobilized on carbon nanofibres for water purification
- Authors: Nyamukamba, Pardon
- Date: 2011
- Subjects: Water -- Purification , Titanium alloys -- Industrial applications , Titanium , Nanoparticles , Drinking water -- Purification , Drinking water -- Contamination
- Language: English
- Type: Thesis , Masters , MSc (Chemistry)
- Identifier: vital:11330 , http://hdl.handle.net/10353/367 , Water -- Purification , Titanium alloys -- Industrial applications , Titanium , Nanoparticles , Drinking water -- Purification , Drinking water -- Contamination
- Description: Titanium dioxide nanoparticles were prepared using the sol-gel process. The effect of temperature and precursor concentration on particle size was investigated. The optimum conditions were then used to prepare carbon and nitrogen doped titanium dioxide (TiO2) nanoparticles. Doping was done to reduce band gap of the nanoparticles in order to utilize visible light in the photocatalytic degradation of organic compounds. A significant shift of the absorption edge to a longer wavelength (lower energy) from 420 nm to 456 nm and 420 nm to 428 nm was observed for the carbon doped and nitrogen doped TiO2 respectively. In this study, the prepared TiO2 photocatalyst was immobilized on carbon nanofibres to allow isolation and reuse of catalyst. The photocatalytic activity of the catalyst was tested using methyl orange as a model pollutant and was based on the decolourization of the dye as it was degraded. The doped TiO2 exhibited higher photocatalytic activity than the undoped TiO2. The materials prepared were characterized by XRD, TEM, SEM, FT-IR, DSC and TGA while the doped TiO2 was characterized by XPS, ESR and Raman Spectroscopy.
- Full Text:
- Date Issued: 2011
- Authors: Nyamukamba, Pardon
- Date: 2011
- Subjects: Water -- Purification , Titanium alloys -- Industrial applications , Titanium , Nanoparticles , Drinking water -- Purification , Drinking water -- Contamination
- Language: English
- Type: Thesis , Masters , MSc (Chemistry)
- Identifier: vital:11330 , http://hdl.handle.net/10353/367 , Water -- Purification , Titanium alloys -- Industrial applications , Titanium , Nanoparticles , Drinking water -- Purification , Drinking water -- Contamination
- Description: Titanium dioxide nanoparticles were prepared using the sol-gel process. The effect of temperature and precursor concentration on particle size was investigated. The optimum conditions were then used to prepare carbon and nitrogen doped titanium dioxide (TiO2) nanoparticles. Doping was done to reduce band gap of the nanoparticles in order to utilize visible light in the photocatalytic degradation of organic compounds. A significant shift of the absorption edge to a longer wavelength (lower energy) from 420 nm to 456 nm and 420 nm to 428 nm was observed for the carbon doped and nitrogen doped TiO2 respectively. In this study, the prepared TiO2 photocatalyst was immobilized on carbon nanofibres to allow isolation and reuse of catalyst. The photocatalytic activity of the catalyst was tested using methyl orange as a model pollutant and was based on the decolourization of the dye as it was degraded. The doped TiO2 exhibited higher photocatalytic activity than the undoped TiO2. The materials prepared were characterized by XRD, TEM, SEM, FT-IR, DSC and TGA while the doped TiO2 was characterized by XPS, ESR and Raman Spectroscopy.
- Full Text:
- Date Issued: 2011
The photophysical properties of low symmetry phthalocyanines in conjunction with quantum dots
- Authors: D'Souza, Sarah
- Date: 2011
- Subjects: Phthalocyanines , Photochemistry , Zinc , Quantum dots , Spectrum analysis , Nanoparticles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4331 , http://hdl.handle.net/10962/d1004992 , Phthalocyanines , Photochemistry , Zinc , Quantum dots , Spectrum analysis , Nanoparticles
- Description: he synthesis, extensive spectroscopic characterization and photophysical studies of low symmetry zinc phthalocyanine have been conducted. Comparisons have been made taking into consideration the influence of the solvent properties as well as substituent type and position. Photosensitizing properties of the zinc phthalocyanine derivatives in the presence of thiol capped CdTe quantum dots (QDs) were compared. The QDs were used as energy transfer donors and to facilitate with energy transfer through Förster resonance energy transfer (FRET) from the QDs to the MPcs. The linkage of unsymmetrically substituted 4-monoaminophenoxy zinc phthalocyanine (ZnAPPc) to CdTe quantum dots capped with mercaptopropionic acid (MPA), L-cysteine (L-cys) or thioglycolic acid (TGA) has been achieved using the coupling agents ethyl-N3 dimethylaminopropyl)carbodiimide (EDC) and N-hydroxy succinimide (NHS), which facilitate formation of an amide bond to form the QD-ZnAPPc-linked complex. The formation of the amide bond was confirmed using UV-Vis, Raman and IR spectroscopies, as well as AFM (atomic force microscopy). Förster resonance energy transfer (FRET) resulted in stimulated emission of ZnAPPc in both the linked (QDZnAPPc-linked) and mixed (QD:ZnAPPc-mixed) conjugates for MPA only. The linked L-cys and TGA complexes (QD-ZnAPPc-linked) gave the largest FRET efficiencies hence showing the advantages of covalent linking. Fluorescence quantum yields of QDs were decreased in QD:ZnAPPc-mixed and QD:ZnAPPc-linked. High triplet state quantum yields were obtained for the linked QD-phthalocyanine derivatives (ZnAPPc)and monoaminozinc phthalocyanine (ZnAPc) compared to when ZnAPPc and ZnAPc were mixed with MPA QDs without a chemical bond.
- Full Text:
- Date Issued: 2011
- Authors: D'Souza, Sarah
- Date: 2011
- Subjects: Phthalocyanines , Photochemistry , Zinc , Quantum dots , Spectrum analysis , Nanoparticles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4331 , http://hdl.handle.net/10962/d1004992 , Phthalocyanines , Photochemistry , Zinc , Quantum dots , Spectrum analysis , Nanoparticles
- Description: he synthesis, extensive spectroscopic characterization and photophysical studies of low symmetry zinc phthalocyanine have been conducted. Comparisons have been made taking into consideration the influence of the solvent properties as well as substituent type and position. Photosensitizing properties of the zinc phthalocyanine derivatives in the presence of thiol capped CdTe quantum dots (QDs) were compared. The QDs were used as energy transfer donors and to facilitate with energy transfer through Förster resonance energy transfer (FRET) from the QDs to the MPcs. The linkage of unsymmetrically substituted 4-monoaminophenoxy zinc phthalocyanine (ZnAPPc) to CdTe quantum dots capped with mercaptopropionic acid (MPA), L-cysteine (L-cys) or thioglycolic acid (TGA) has been achieved using the coupling agents ethyl-N3 dimethylaminopropyl)carbodiimide (EDC) and N-hydroxy succinimide (NHS), which facilitate formation of an amide bond to form the QD-ZnAPPc-linked complex. The formation of the amide bond was confirmed using UV-Vis, Raman and IR spectroscopies, as well as AFM (atomic force microscopy). Förster resonance energy transfer (FRET) resulted in stimulated emission of ZnAPPc in both the linked (QDZnAPPc-linked) and mixed (QD:ZnAPPc-mixed) conjugates for MPA only. The linked L-cys and TGA complexes (QD-ZnAPPc-linked) gave the largest FRET efficiencies hence showing the advantages of covalent linking. Fluorescence quantum yields of QDs were decreased in QD:ZnAPPc-mixed and QD:ZnAPPc-linked. High triplet state quantum yields were obtained for the linked QD-phthalocyanine derivatives (ZnAPPc)and monoaminozinc phthalocyanine (ZnAPc) compared to when ZnAPPc and ZnAPc were mixed with MPA QDs without a chemical bond.
- Full Text:
- Date Issued: 2011
Investigating the enzymatic mechanism of platinum nanoparticle synthesis in sulfate-reducing bacteria
- Authors: Riddin, Tamsyn Louise
- Date: 2009
- Subjects: Platinum , Nanoparticles , Sulfate-reducing bacteria
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3965 , http://hdl.handle.net/10962/d1004024 , Platinum , Nanoparticles , Sulfate-reducing bacteria
- Description: Efforts to discover an efficient yet environmentally friendly mode of metal nanoparticle (NP) synthesis are increasing rapidly. A ‘green’ route that avoids the high costs, toxic wastes and complicated protocols associated with chemical synthesis methods is therefore highly sought after. A biologically based protocol will provide the possibility of gaining control over the mechanism merely by manipulating the experimental conditions of the system. Given that the properties of nanoparticles are highly dependant on the morphology of the particles themselves, this mechanistic control will provide significant industrial advantages with regards to tailoring specific properties of the nanoparticles produced. The key objectives of this study were to: a) determine whether a consortium of sulfate-reducing bacteria was capable of platinum nanoparticle synthesis, b) elucidate the bioreductive, enzymatic mechanism responsible, and c) attempt to control the morphologies of the particles produced. A consortium of sulfate-reducing bacteria (SRB), isolated from sewage sludge, was used in these investigations due to the advantages a consortium provides in comparison to pure cultures. The syntrophic relationships established within the constituent species not only prevent the growth of contaminant microbes, but increases the oxygen-tolerance of the system as a whole. The sulfate-reducing consortium was shown to possess an aerobic mechanism for Pt(IV) reduction which, though different from the anaerobic bioreductive mechanism previously identified in literature, did not require an exogenous electron donor. It was demonstrated that the Pt(IV) ion becomes reduced to Pt(0) via a two-cycle mechanism involving Pt(II) as the intermediate. Further investigation elucidated the reduction of Pt(IV) to Pt(II) to be dependant on a novel Pt(IV) reductase which becomes upregulated in the presence of Cu(II), while the reduction of Pt(II) to Pt(0) occurred by means of a periplasmic hydrogenase. To our knowledge, this is the first time a coupled mechanism for Pt(IV) reduction by micro-organisms has been proposed. A cell-free, crude protein solution from the consortium produced both geometric and irregular platinum nanoparticles. The wavelength of 334 nm was chosen as a nonquantitative indicator of Pt(0) nanoparticle formation over time. The optimum conditions for nanoparticle synthesis were pH 9.0, 65 ˚C and 0.75 mM Pt(IV) as H2PtCl6 salt. In the absence of a buffer a Pt(IV) concentration > 1 mM resulted in the precipitation of protein-nanoparticle bioconjugates, due to unfavourable acidic conditions. This demonstrated that the nanoparticles were binding to and becoming stabilised by general protein in the cell-free solution. Upon addition of a sodium-bicarbonate buffer, a general increase in Pt(IV) reduction to Pt(II) was observed. The addition of the buffer also resulted in an unexplained change in particle morphology and for this reason was not used in subsequent investigations. Polyvinylpyrrolidone (PVP) was shown to compromise the reduction rate of the Pt(IV) ion by SRB cells. The presence of extracellular NP’s was suggested by the colour of the supernatant turning brown and the A334 increasing over time. Attempts to visualise the particles by transmission electron microscopy (TEM) resulted in an unexpected phenomenon where nanoparticles could be observed to form dynamically upon irradiation by the electron beam. Extended irradiation by the electron beam also resulted in structural changes of the particles occurring during observation. An increase in temperature was shown to increase the reduction rate which in turn resulted in particles decreasing in size. The starting pH was shown to have a significant effect on the reduction rate and particle morphology although specific trends could not be identified. In conclusion, the cell-soluble extract from the sulfate-reducing consortium investigated, is capable of Pt(0) nanoparticle synthesis. Precise control over the particle morphology was not attained although the mechanism was further clarified and optimal conditions for nanoparticle synthesis were determined.
- Full Text:
- Date Issued: 2009
- Authors: Riddin, Tamsyn Louise
- Date: 2009
- Subjects: Platinum , Nanoparticles , Sulfate-reducing bacteria
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3965 , http://hdl.handle.net/10962/d1004024 , Platinum , Nanoparticles , Sulfate-reducing bacteria
- Description: Efforts to discover an efficient yet environmentally friendly mode of metal nanoparticle (NP) synthesis are increasing rapidly. A ‘green’ route that avoids the high costs, toxic wastes and complicated protocols associated with chemical synthesis methods is therefore highly sought after. A biologically based protocol will provide the possibility of gaining control over the mechanism merely by manipulating the experimental conditions of the system. Given that the properties of nanoparticles are highly dependant on the morphology of the particles themselves, this mechanistic control will provide significant industrial advantages with regards to tailoring specific properties of the nanoparticles produced. The key objectives of this study were to: a) determine whether a consortium of sulfate-reducing bacteria was capable of platinum nanoparticle synthesis, b) elucidate the bioreductive, enzymatic mechanism responsible, and c) attempt to control the morphologies of the particles produced. A consortium of sulfate-reducing bacteria (SRB), isolated from sewage sludge, was used in these investigations due to the advantages a consortium provides in comparison to pure cultures. The syntrophic relationships established within the constituent species not only prevent the growth of contaminant microbes, but increases the oxygen-tolerance of the system as a whole. The sulfate-reducing consortium was shown to possess an aerobic mechanism for Pt(IV) reduction which, though different from the anaerobic bioreductive mechanism previously identified in literature, did not require an exogenous electron donor. It was demonstrated that the Pt(IV) ion becomes reduced to Pt(0) via a two-cycle mechanism involving Pt(II) as the intermediate. Further investigation elucidated the reduction of Pt(IV) to Pt(II) to be dependant on a novel Pt(IV) reductase which becomes upregulated in the presence of Cu(II), while the reduction of Pt(II) to Pt(0) occurred by means of a periplasmic hydrogenase. To our knowledge, this is the first time a coupled mechanism for Pt(IV) reduction by micro-organisms has been proposed. A cell-free, crude protein solution from the consortium produced both geometric and irregular platinum nanoparticles. The wavelength of 334 nm was chosen as a nonquantitative indicator of Pt(0) nanoparticle formation over time. The optimum conditions for nanoparticle synthesis were pH 9.0, 65 ˚C and 0.75 mM Pt(IV) as H2PtCl6 salt. In the absence of a buffer a Pt(IV) concentration > 1 mM resulted in the precipitation of protein-nanoparticle bioconjugates, due to unfavourable acidic conditions. This demonstrated that the nanoparticles were binding to and becoming stabilised by general protein in the cell-free solution. Upon addition of a sodium-bicarbonate buffer, a general increase in Pt(IV) reduction to Pt(II) was observed. The addition of the buffer also resulted in an unexplained change in particle morphology and for this reason was not used in subsequent investigations. Polyvinylpyrrolidone (PVP) was shown to compromise the reduction rate of the Pt(IV) ion by SRB cells. The presence of extracellular NP’s was suggested by the colour of the supernatant turning brown and the A334 increasing over time. Attempts to visualise the particles by transmission electron microscopy (TEM) resulted in an unexpected phenomenon where nanoparticles could be observed to form dynamically upon irradiation by the electron beam. Extended irradiation by the electron beam also resulted in structural changes of the particles occurring during observation. An increase in temperature was shown to increase the reduction rate which in turn resulted in particles decreasing in size. The starting pH was shown to have a significant effect on the reduction rate and particle morphology although specific trends could not be identified. In conclusion, the cell-soluble extract from the sulfate-reducing consortium investigated, is capable of Pt(0) nanoparticle synthesis. Precise control over the particle morphology was not attained although the mechanism was further clarified and optimal conditions for nanoparticle synthesis were determined.
- Full Text:
- Date Issued: 2009
Isolation, purification and characterization of a 'factor' from Fusarium oxysporum responsible for platinum nanoparticle formation
- Authors: Govender, Yageshni
- Date: 2008
- Subjects: Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3923 , http://hdl.handle.net/10962/d1003982 , Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Description: Nanoparticles are microscopic particles in the nanometre range of between 1-100 nm. A wide variety of metal nanoparticles have been found to be produced by prokaryotic and eukaryotic organisms including several fungal species, when exposed to solutions containing metal salts. Previous studies have suggested that this bioreduction of metal particles may occur via an active reductase/hydrogenase enzyme process where H2 is the electron donor and positively charged platinum species act as the electron acceptors becoming reduced to a neutral metal nanoparticle. In view of this on going research, the current study investigated the “factors” in the fungus Fusarium oxysporum which were responsible for platinum nanoparticle formation. The fungus F.oxysporum was used in this study as it has been previously shown to produce a variety of nanoparticles including gold and silver. During exposure of the biomass to H2PtCl6 the initial response to the platinum salts was metal internalisation and subsequent reduction of H2PtCI6 to produce platinum nanoparticles. The observed localization and distribution of platinum precipitates provided some evidence for a hydrogenase mediated bioreduction of platinum salts to produce nanoparticles. Factors secreted by the fungus into the extracellular fluids, were shown to be responsible for platinum nanoparticle formation. From the identification, purification and characterisation studies it was concluded that a hydrogenase and other “factors” were responsible for platinum nanoparticle formation in F.oxysporum. Purification of the hydrogenase by freeze-drying and Sephacryl S200 size exclusion- ion exchange chromatography revealed the enzyme to be a dimer with a 29.4 and 44.5 kDa when analysed by a 10 % SDS-PAGE. Characterisation of the enzyme revealed optimal activity at a pH of 7.5 and temperature of 38 °C while it exhibited a poor thermal stability with a half life of 36 minutes. The kinetic parameters Vmax and Km were 3.16 U ml-1 and 3.64 mM respectively. The purified hydrogenase was used in subsequent experiments for the reduction of platinum salts, H2PtCl6 and PtCl2. the results indicated an over 90 % reduction of the platinum salts and TEM micrographs indicated the production of platinum nanoparticles under the various experimental conditions.
- Full Text:
- Date Issued: 2008
- Authors: Govender, Yageshni
- Date: 2008
- Subjects: Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3923 , http://hdl.handle.net/10962/d1003982 , Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Description: Nanoparticles are microscopic particles in the nanometre range of between 1-100 nm. A wide variety of metal nanoparticles have been found to be produced by prokaryotic and eukaryotic organisms including several fungal species, when exposed to solutions containing metal salts. Previous studies have suggested that this bioreduction of metal particles may occur via an active reductase/hydrogenase enzyme process where H2 is the electron donor and positively charged platinum species act as the electron acceptors becoming reduced to a neutral metal nanoparticle. In view of this on going research, the current study investigated the “factors” in the fungus Fusarium oxysporum which were responsible for platinum nanoparticle formation. The fungus F.oxysporum was used in this study as it has been previously shown to produce a variety of nanoparticles including gold and silver. During exposure of the biomass to H2PtCl6 the initial response to the platinum salts was metal internalisation and subsequent reduction of H2PtCI6 to produce platinum nanoparticles. The observed localization and distribution of platinum precipitates provided some evidence for a hydrogenase mediated bioreduction of platinum salts to produce nanoparticles. Factors secreted by the fungus into the extracellular fluids, were shown to be responsible for platinum nanoparticle formation. From the identification, purification and characterisation studies it was concluded that a hydrogenase and other “factors” were responsible for platinum nanoparticle formation in F.oxysporum. Purification of the hydrogenase by freeze-drying and Sephacryl S200 size exclusion- ion exchange chromatography revealed the enzyme to be a dimer with a 29.4 and 44.5 kDa when analysed by a 10 % SDS-PAGE. Characterisation of the enzyme revealed optimal activity at a pH of 7.5 and temperature of 38 °C while it exhibited a poor thermal stability with a half life of 36 minutes. The kinetic parameters Vmax and Km were 3.16 U ml-1 and 3.64 mM respectively. The purified hydrogenase was used in subsequent experiments for the reduction of platinum salts, H2PtCl6 and PtCl2. the results indicated an over 90 % reduction of the platinum salts and TEM micrographs indicated the production of platinum nanoparticles under the various experimental conditions.
- Full Text:
- Date Issued: 2008
- «
- ‹
- 1
- ›
- »