Photophysicochemical properties of aluminium phthalocyanine-platinum conjugates
- Authors: Malinga, Nduduzo Nkanyiso
- Date: 2013 , 2013-04-05
- Subjects: Phthalocyanines , Photochemistry , Photochemotherapy , Aluminium , Platinum , Nanoparticles , Cancer -- Photochemotherapy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4285 , http://hdl.handle.net/10962/d1002954 , Phthalocyanines , Photochemistry , Photochemotherapy , Aluminium , Platinum , Nanoparticles , Cancer -- Photochemotherapy
- Description: The combination of chemotherapy and photodynamic therapy was investigated by synthesis and characterization of octacarboxy phthalocyanine covalent conjugates with platinum complexes. This work presents the synthesis, characterization and photophysicochemical properties of aluminium (diaquaplatinum) octacarboxyphthalocyanine and aluminium (diammine) octacarboxyphthalocyanine. The conjugates were prepared by conjugating aluminium octacarboxy phthalocyanine with potassium tetrachloro platinate to yield aluminium tetrakis and trikis (diaquaplatinum) octacarboxy phthalocyanine. The aluminium octacarboxy phthalocyanine was also conjugated with cis-diamminedichloroplatinum to yield aluminium bis and tris (diaquaplatinum) octacarboxy phthalocyanine. From the characterization of the conjugates it was discovered that the aluminium (diaquaplatinum) octacarboxy phthalocyanine had formed platinum nanoparticles with the Pc acting as a capping agent. The triplet lifetimes decreased with the increasing number of platinum complexesconjugated to the Pc. The heavy atom effect improved the overall photophysicochemical properties.
- Full Text:
- Date Issued: 2013
- Authors: Malinga, Nduduzo Nkanyiso
- Date: 2013 , 2013-04-05
- Subjects: Phthalocyanines , Photochemistry , Photochemotherapy , Aluminium , Platinum , Nanoparticles , Cancer -- Photochemotherapy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4285 , http://hdl.handle.net/10962/d1002954 , Phthalocyanines , Photochemistry , Photochemotherapy , Aluminium , Platinum , Nanoparticles , Cancer -- Photochemotherapy
- Description: The combination of chemotherapy and photodynamic therapy was investigated by synthesis and characterization of octacarboxy phthalocyanine covalent conjugates with platinum complexes. This work presents the synthesis, characterization and photophysicochemical properties of aluminium (diaquaplatinum) octacarboxyphthalocyanine and aluminium (diammine) octacarboxyphthalocyanine. The conjugates were prepared by conjugating aluminium octacarboxy phthalocyanine with potassium tetrachloro platinate to yield aluminium tetrakis and trikis (diaquaplatinum) octacarboxy phthalocyanine. The aluminium octacarboxy phthalocyanine was also conjugated with cis-diamminedichloroplatinum to yield aluminium bis and tris (diaquaplatinum) octacarboxy phthalocyanine. From the characterization of the conjugates it was discovered that the aluminium (diaquaplatinum) octacarboxy phthalocyanine had formed platinum nanoparticles with the Pc acting as a capping agent. The triplet lifetimes decreased with the increasing number of platinum complexesconjugated to the Pc. The heavy atom effect improved the overall photophysicochemical properties.
- Full Text:
- Date Issued: 2013
The development of platinum and palladium-selective polymeric materials
- Authors: Fayemi, Omolola Esther
- Date: 2013 , 2013-05-03
- Subjects: Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4287 , http://hdl.handle.net/10962/d1002964 , Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species (PtCl₆²⁻ and PdCl₄²⁻) on polystyrene-based beads and nanofibers as well as silica microparticles functionalized with polyamine centres derived from ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) is described. The functionalized sorbent materials were characterized by using microanalysis, SEM, XPS, BET and FTIR. The nanofiber sorbent material functionalized with ethylenediamine (F-EDA) had the highest loading capacity which was attributed to its high nitrogen content (10.83%) and larger surface area (241.3m²/g). The adsorption and loading capacities of the sorption materials were investigated using both the batch and column studies in 1 M HCI. The adsorption studies for both PtCl₆²⁻ and PdCl₄²⁻ on the polystyrene-based sorbent materials fit the Langmuir isotherm while the silica-based sorbents fitted the Freundlich isotherm with R² values > 0.99. In the column experiment the highest loading capacity of Pt and Pd were 7.4 mg/g and 4.3 mg/g respectively on the nanofiber sorbent material based on ethylenediamine (EDA). The polystyrene and silica-based resins with triethylenetetramine (TETA) functionality (M-TETA and S-TETA) showed selectivity for platinum and palladium, respectively. Metal chlorido complexes loaded on the sorbent materials were recovered by using 3% m/v thiourea solution as teh eluting agent with quantitative desorption efficiency under the selected experimental conditions. The separation of platinum from palladium was partially achieved by selective stripping of PtCl₆²⁻ with 0.5 M of NaClO₄ in 1.0 M HCI with PdCl₄²⁻ was eluted with 0.5 M thiourea in 1.0 M HCI. The selectivity of the M-TETA and S-TETA sorbent materials was proved by column separation of platinum(IV) and palladium(II), respectively, from synthetic solutions containing iridium(IV) and rhodium(III). The loading capacity for platinum on M-TETA was 0.09 mg/g while it was 0.27 mg/g for palladium on S-TETA. , Acrobat PDFMaker 10.1 for Word , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
- Authors: Fayemi, Omolola Esther
- Date: 2013 , 2013-05-03
- Subjects: Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4287 , http://hdl.handle.net/10962/d1002964 , Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species (PtCl₆²⁻ and PdCl₄²⁻) on polystyrene-based beads and nanofibers as well as silica microparticles functionalized with polyamine centres derived from ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) is described. The functionalized sorbent materials were characterized by using microanalysis, SEM, XPS, BET and FTIR. The nanofiber sorbent material functionalized with ethylenediamine (F-EDA) had the highest loading capacity which was attributed to its high nitrogen content (10.83%) and larger surface area (241.3m²/g). The adsorption and loading capacities of the sorption materials were investigated using both the batch and column studies in 1 M HCI. The adsorption studies for both PtCl₆²⁻ and PdCl₄²⁻ on the polystyrene-based sorbent materials fit the Langmuir isotherm while the silica-based sorbents fitted the Freundlich isotherm with R² values > 0.99. In the column experiment the highest loading capacity of Pt and Pd were 7.4 mg/g and 4.3 mg/g respectively on the nanofiber sorbent material based on ethylenediamine (EDA). The polystyrene and silica-based resins with triethylenetetramine (TETA) functionality (M-TETA and S-TETA) showed selectivity for platinum and palladium, respectively. Metal chlorido complexes loaded on the sorbent materials were recovered by using 3% m/v thiourea solution as teh eluting agent with quantitative desorption efficiency under the selected experimental conditions. The separation of platinum from palladium was partially achieved by selective stripping of PtCl₆²⁻ with 0.5 M of NaClO₄ in 1.0 M HCI with PdCl₄²⁻ was eluted with 0.5 M thiourea in 1.0 M HCI. The selectivity of the M-TETA and S-TETA sorbent materials was proved by column separation of platinum(IV) and palladium(II), respectively, from synthetic solutions containing iridium(IV) and rhodium(III). The loading capacity for platinum on M-TETA was 0.09 mg/g while it was 0.27 mg/g for palladium on S-TETA. , Acrobat PDFMaker 10.1 for Word , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
A Speciation study of the chloro-hydroxo complexes of Pt(II)
- Authors: Davis, John Christopher
- Date: 2009
- Subjects: Platinum , Platinum -- Separation , Platinum compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10388 , http://hdl.handle.net/10948/1213 , Platinum , Platinum -- Separation , Platinum compounds
- Description: In this study a method was developed to identify and quantify platinum(II) complexes of the type [PtCl4-n(OH)n]2- and [PtCl4-n(H2O)n]2-n. Separation of the various species was achieved with the aid of a hyphenated reversed phase HPLC-ICP-MS technique coupled with an ion-pairing reagent, HMHDCl2. The adsorption of HMHD2+ onto a C-18 column was investigated by generating a series of breakthrough curves. It was found that the selectivity for high charge density anions originates from its low surface coverage relative to TBA+, which on the other hand could not separate Pt(II) complexes. The peaks in the chromatographic traces were assigned by following the stepwise ligand substitution of [PtCl4]2- in hydroxide medium with UV/Vis spectrophotometry and HPLC-ICP-MS simultaneously. A computer program was written by the author to analyse chromatographic data by deconvoluting the chromatogram into its individual components and calculating the mole fraction of each component. The validity of the consecutive pseudo-first order model was validated by constructing 3D Mauser diagrams with the raw spectrophotometric data (A1 vs A2 vs A3). Additional software was used to simulate the raw spectrophotometric data and processed chromatographic data. The pseudo-first order rate constants obtained in both cases were in agreement with each other. Hence, peaks were assigned to [PtCl4]2-, [PtCl3(OH)]2-, [PtCl2(OH)2]2-, [PtCl3(H2O)]-. The molar extinction coefficient spectra of [PtCl3(OH)]2- and [PtCl2(OH)2]2- were obtained by simulating the spectrophotometric data at wavelengths from 280 to 450 nm. The reaction of [PtCl4]2- with sodium hydroxide was investigated with UV/Vis spectrophotometry at 25 °C. A rate constant consisting of a first and second order term was obtained. The first order term agreed with what has been reported in the literature for aquation of [PtCl4]2- at 25 degrees C. The influence of temperature was established by conducting the experiment at different temperatures. It was found that the reaction proceeds essentially via aquation at elevated temperatures.
- Full Text:
- Date Issued: 2009
- Authors: Davis, John Christopher
- Date: 2009
- Subjects: Platinum , Platinum -- Separation , Platinum compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10388 , http://hdl.handle.net/10948/1213 , Platinum , Platinum -- Separation , Platinum compounds
- Description: In this study a method was developed to identify and quantify platinum(II) complexes of the type [PtCl4-n(OH)n]2- and [PtCl4-n(H2O)n]2-n. Separation of the various species was achieved with the aid of a hyphenated reversed phase HPLC-ICP-MS technique coupled with an ion-pairing reagent, HMHDCl2. The adsorption of HMHD2+ onto a C-18 column was investigated by generating a series of breakthrough curves. It was found that the selectivity for high charge density anions originates from its low surface coverage relative to TBA+, which on the other hand could not separate Pt(II) complexes. The peaks in the chromatographic traces were assigned by following the stepwise ligand substitution of [PtCl4]2- in hydroxide medium with UV/Vis spectrophotometry and HPLC-ICP-MS simultaneously. A computer program was written by the author to analyse chromatographic data by deconvoluting the chromatogram into its individual components and calculating the mole fraction of each component. The validity of the consecutive pseudo-first order model was validated by constructing 3D Mauser diagrams with the raw spectrophotometric data (A1 vs A2 vs A3). Additional software was used to simulate the raw spectrophotometric data and processed chromatographic data. The pseudo-first order rate constants obtained in both cases were in agreement with each other. Hence, peaks were assigned to [PtCl4]2-, [PtCl3(OH)]2-, [PtCl2(OH)2]2-, [PtCl3(H2O)]-. The molar extinction coefficient spectra of [PtCl3(OH)]2- and [PtCl2(OH)2]2- were obtained by simulating the spectrophotometric data at wavelengths from 280 to 450 nm. The reaction of [PtCl4]2- with sodium hydroxide was investigated with UV/Vis spectrophotometry at 25 °C. A rate constant consisting of a first and second order term was obtained. The first order term agreed with what has been reported in the literature for aquation of [PtCl4]2- at 25 degrees C. The influence of temperature was established by conducting the experiment at different temperatures. It was found that the reaction proceeds essentially via aquation at elevated temperatures.
- Full Text:
- Date Issued: 2009
Investigating the enzymatic mechanism of platinum nanoparticle synthesis in sulfate-reducing bacteria
- Authors: Riddin, Tamsyn Louise
- Date: 2009
- Subjects: Platinum , Nanoparticles , Sulfate-reducing bacteria
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3965 , http://hdl.handle.net/10962/d1004024 , Platinum , Nanoparticles , Sulfate-reducing bacteria
- Description: Efforts to discover an efficient yet environmentally friendly mode of metal nanoparticle (NP) synthesis are increasing rapidly. A ‘green’ route that avoids the high costs, toxic wastes and complicated protocols associated with chemical synthesis methods is therefore highly sought after. A biologically based protocol will provide the possibility of gaining control over the mechanism merely by manipulating the experimental conditions of the system. Given that the properties of nanoparticles are highly dependant on the morphology of the particles themselves, this mechanistic control will provide significant industrial advantages with regards to tailoring specific properties of the nanoparticles produced. The key objectives of this study were to: a) determine whether a consortium of sulfate-reducing bacteria was capable of platinum nanoparticle synthesis, b) elucidate the bioreductive, enzymatic mechanism responsible, and c) attempt to control the morphologies of the particles produced. A consortium of sulfate-reducing bacteria (SRB), isolated from sewage sludge, was used in these investigations due to the advantages a consortium provides in comparison to pure cultures. The syntrophic relationships established within the constituent species not only prevent the growth of contaminant microbes, but increases the oxygen-tolerance of the system as a whole. The sulfate-reducing consortium was shown to possess an aerobic mechanism for Pt(IV) reduction which, though different from the anaerobic bioreductive mechanism previously identified in literature, did not require an exogenous electron donor. It was demonstrated that the Pt(IV) ion becomes reduced to Pt(0) via a two-cycle mechanism involving Pt(II) as the intermediate. Further investigation elucidated the reduction of Pt(IV) to Pt(II) to be dependant on a novel Pt(IV) reductase which becomes upregulated in the presence of Cu(II), while the reduction of Pt(II) to Pt(0) occurred by means of a periplasmic hydrogenase. To our knowledge, this is the first time a coupled mechanism for Pt(IV) reduction by micro-organisms has been proposed. A cell-free, crude protein solution from the consortium produced both geometric and irregular platinum nanoparticles. The wavelength of 334 nm was chosen as a nonquantitative indicator of Pt(0) nanoparticle formation over time. The optimum conditions for nanoparticle synthesis were pH 9.0, 65 ˚C and 0.75 mM Pt(IV) as H2PtCl6 salt. In the absence of a buffer a Pt(IV) concentration > 1 mM resulted in the precipitation of protein-nanoparticle bioconjugates, due to unfavourable acidic conditions. This demonstrated that the nanoparticles were binding to and becoming stabilised by general protein in the cell-free solution. Upon addition of a sodium-bicarbonate buffer, a general increase in Pt(IV) reduction to Pt(II) was observed. The addition of the buffer also resulted in an unexplained change in particle morphology and for this reason was not used in subsequent investigations. Polyvinylpyrrolidone (PVP) was shown to compromise the reduction rate of the Pt(IV) ion by SRB cells. The presence of extracellular NP’s was suggested by the colour of the supernatant turning brown and the A334 increasing over time. Attempts to visualise the particles by transmission electron microscopy (TEM) resulted in an unexpected phenomenon where nanoparticles could be observed to form dynamically upon irradiation by the electron beam. Extended irradiation by the electron beam also resulted in structural changes of the particles occurring during observation. An increase in temperature was shown to increase the reduction rate which in turn resulted in particles decreasing in size. The starting pH was shown to have a significant effect on the reduction rate and particle morphology although specific trends could not be identified. In conclusion, the cell-soluble extract from the sulfate-reducing consortium investigated, is capable of Pt(0) nanoparticle synthesis. Precise control over the particle morphology was not attained although the mechanism was further clarified and optimal conditions for nanoparticle synthesis were determined.
- Full Text:
- Date Issued: 2009
- Authors: Riddin, Tamsyn Louise
- Date: 2009
- Subjects: Platinum , Nanoparticles , Sulfate-reducing bacteria
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3965 , http://hdl.handle.net/10962/d1004024 , Platinum , Nanoparticles , Sulfate-reducing bacteria
- Description: Efforts to discover an efficient yet environmentally friendly mode of metal nanoparticle (NP) synthesis are increasing rapidly. A ‘green’ route that avoids the high costs, toxic wastes and complicated protocols associated with chemical synthesis methods is therefore highly sought after. A biologically based protocol will provide the possibility of gaining control over the mechanism merely by manipulating the experimental conditions of the system. Given that the properties of nanoparticles are highly dependant on the morphology of the particles themselves, this mechanistic control will provide significant industrial advantages with regards to tailoring specific properties of the nanoparticles produced. The key objectives of this study were to: a) determine whether a consortium of sulfate-reducing bacteria was capable of platinum nanoparticle synthesis, b) elucidate the bioreductive, enzymatic mechanism responsible, and c) attempt to control the morphologies of the particles produced. A consortium of sulfate-reducing bacteria (SRB), isolated from sewage sludge, was used in these investigations due to the advantages a consortium provides in comparison to pure cultures. The syntrophic relationships established within the constituent species not only prevent the growth of contaminant microbes, but increases the oxygen-tolerance of the system as a whole. The sulfate-reducing consortium was shown to possess an aerobic mechanism for Pt(IV) reduction which, though different from the anaerobic bioreductive mechanism previously identified in literature, did not require an exogenous electron donor. It was demonstrated that the Pt(IV) ion becomes reduced to Pt(0) via a two-cycle mechanism involving Pt(II) as the intermediate. Further investigation elucidated the reduction of Pt(IV) to Pt(II) to be dependant on a novel Pt(IV) reductase which becomes upregulated in the presence of Cu(II), while the reduction of Pt(II) to Pt(0) occurred by means of a periplasmic hydrogenase. To our knowledge, this is the first time a coupled mechanism for Pt(IV) reduction by micro-organisms has been proposed. A cell-free, crude protein solution from the consortium produced both geometric and irregular platinum nanoparticles. The wavelength of 334 nm was chosen as a nonquantitative indicator of Pt(0) nanoparticle formation over time. The optimum conditions for nanoparticle synthesis were pH 9.0, 65 ˚C and 0.75 mM Pt(IV) as H2PtCl6 salt. In the absence of a buffer a Pt(IV) concentration > 1 mM resulted in the precipitation of protein-nanoparticle bioconjugates, due to unfavourable acidic conditions. This demonstrated that the nanoparticles were binding to and becoming stabilised by general protein in the cell-free solution. Upon addition of a sodium-bicarbonate buffer, a general increase in Pt(IV) reduction to Pt(II) was observed. The addition of the buffer also resulted in an unexplained change in particle morphology and for this reason was not used in subsequent investigations. Polyvinylpyrrolidone (PVP) was shown to compromise the reduction rate of the Pt(IV) ion by SRB cells. The presence of extracellular NP’s was suggested by the colour of the supernatant turning brown and the A334 increasing over time. Attempts to visualise the particles by transmission electron microscopy (TEM) resulted in an unexpected phenomenon where nanoparticles could be observed to form dynamically upon irradiation by the electron beam. Extended irradiation by the electron beam also resulted in structural changes of the particles occurring during observation. An increase in temperature was shown to increase the reduction rate which in turn resulted in particles decreasing in size. The starting pH was shown to have a significant effect on the reduction rate and particle morphology although specific trends could not be identified. In conclusion, the cell-soluble extract from the sulfate-reducing consortium investigated, is capable of Pt(0) nanoparticle synthesis. Precise control over the particle morphology was not attained although the mechanism was further clarified and optimal conditions for nanoparticle synthesis were determined.
- Full Text:
- Date Issued: 2009
Development of platinum metal specific separating agents
- Authors: Jonck, Heine
- Date: 2008
- Subjects: Platinum , Platinum -- Separation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10401 , http://hdl.handle.net/10948/712 , Platinum , Platinum -- Separation
- Description: In this dissertation, the aim was to develop a platinum specific resin to be utilized for the early removal of platinum from the industrial feed solution. Efforts were therefore directed towards the syntheses of silica based resins, with active centra, designed for platinum. The large chlorometallate ions present in the feed stream, were characterized in terms of physical parameters relevant to phase distribution, namely distortability (RD), charge density, softness (σ) etc. Matching cations for each of the types were investigated. In order to attempt the design of platinum specific resins, different structural amines were used to aminate the silicone precursor and to subsequently fix these onto the silica framework. Two different solvents namely alcohol and dmf were used in this process, resulting in two sets of resins, with different properties. The design was based on previous experience with these ions, with reference to their behaviour towards different types of cations. The platinum species, PtCl6 2- and PtCl4 2-, as well as the most important contaminants in the feed stream, were typified, bearing in mind size, charge, charge density and distortability. Different types of cationic centra, having differences in charge density, stereochemical crowding and extent of hydrophobicity, were synthesized and tested-both as solvent extractants (where possible) and silica based resins. The results indicated that, partly screened secondary ammonium cationic resin species, which could be regarded as “intermediate”, proved to be satisfactory both in their high percentage extraction for PtCl4 2- and rejection of contaminants like chlororhodates, chloroiridates(III) and FeCl4 -. It was however necessary, to work at a redox potential, where iridium(IV) in the form of IrCl6 2-, was absent. Various 2-aminoalkane resins were prepared, with variation in the length of alkane group and synthesised by the two different solvents. The latter resulted in two sets of resins with not only differing compactness, but also having significantly different properties with reference to platinum specificity, HCl effect and stripping potential. The 2-aminobutane and 2-aminoheptane resins in particular, proved to be very satisfactory platinum specific resins, both with respect to selectivity, platinum capacity and stripping potential. The various physical parameters could be applied to identify the chemical behaviour of anions and assist in the development of anion specificity for the relevant species.
- Full Text:
- Date Issued: 2008
- Authors: Jonck, Heine
- Date: 2008
- Subjects: Platinum , Platinum -- Separation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10401 , http://hdl.handle.net/10948/712 , Platinum , Platinum -- Separation
- Description: In this dissertation, the aim was to develop a platinum specific resin to be utilized for the early removal of platinum from the industrial feed solution. Efforts were therefore directed towards the syntheses of silica based resins, with active centra, designed for platinum. The large chlorometallate ions present in the feed stream, were characterized in terms of physical parameters relevant to phase distribution, namely distortability (RD), charge density, softness (σ) etc. Matching cations for each of the types were investigated. In order to attempt the design of platinum specific resins, different structural amines were used to aminate the silicone precursor and to subsequently fix these onto the silica framework. Two different solvents namely alcohol and dmf were used in this process, resulting in two sets of resins, with different properties. The design was based on previous experience with these ions, with reference to their behaviour towards different types of cations. The platinum species, PtCl6 2- and PtCl4 2-, as well as the most important contaminants in the feed stream, were typified, bearing in mind size, charge, charge density and distortability. Different types of cationic centra, having differences in charge density, stereochemical crowding and extent of hydrophobicity, were synthesized and tested-both as solvent extractants (where possible) and silica based resins. The results indicated that, partly screened secondary ammonium cationic resin species, which could be regarded as “intermediate”, proved to be satisfactory both in their high percentage extraction for PtCl4 2- and rejection of contaminants like chlororhodates, chloroiridates(III) and FeCl4 -. It was however necessary, to work at a redox potential, where iridium(IV) in the form of IrCl6 2-, was absent. Various 2-aminoalkane resins were prepared, with variation in the length of alkane group and synthesised by the two different solvents. The latter resulted in two sets of resins with not only differing compactness, but also having significantly different properties with reference to platinum specificity, HCl effect and stripping potential. The 2-aminobutane and 2-aminoheptane resins in particular, proved to be very satisfactory platinum specific resins, both with respect to selectivity, platinum capacity and stripping potential. The various physical parameters could be applied to identify the chemical behaviour of anions and assist in the development of anion specificity for the relevant species.
- Full Text:
- Date Issued: 2008
Isolation, purification and characterization of a 'factor' from Fusarium oxysporum responsible for platinum nanoparticle formation
- Authors: Govender, Yageshni
- Date: 2008
- Subjects: Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3923 , http://hdl.handle.net/10962/d1003982 , Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Description: Nanoparticles are microscopic particles in the nanometre range of between 1-100 nm. A wide variety of metal nanoparticles have been found to be produced by prokaryotic and eukaryotic organisms including several fungal species, when exposed to solutions containing metal salts. Previous studies have suggested that this bioreduction of metal particles may occur via an active reductase/hydrogenase enzyme process where H2 is the electron donor and positively charged platinum species act as the electron acceptors becoming reduced to a neutral metal nanoparticle. In view of this on going research, the current study investigated the “factors” in the fungus Fusarium oxysporum which were responsible for platinum nanoparticle formation. The fungus F.oxysporum was used in this study as it has been previously shown to produce a variety of nanoparticles including gold and silver. During exposure of the biomass to H2PtCl6 the initial response to the platinum salts was metal internalisation and subsequent reduction of H2PtCI6 to produce platinum nanoparticles. The observed localization and distribution of platinum precipitates provided some evidence for a hydrogenase mediated bioreduction of platinum salts to produce nanoparticles. Factors secreted by the fungus into the extracellular fluids, were shown to be responsible for platinum nanoparticle formation. From the identification, purification and characterisation studies it was concluded that a hydrogenase and other “factors” were responsible for platinum nanoparticle formation in F.oxysporum. Purification of the hydrogenase by freeze-drying and Sephacryl S200 size exclusion- ion exchange chromatography revealed the enzyme to be a dimer with a 29.4 and 44.5 kDa when analysed by a 10 % SDS-PAGE. Characterisation of the enzyme revealed optimal activity at a pH of 7.5 and temperature of 38 °C while it exhibited a poor thermal stability with a half life of 36 minutes. The kinetic parameters Vmax and Km were 3.16 U ml-1 and 3.64 mM respectively. The purified hydrogenase was used in subsequent experiments for the reduction of platinum salts, H2PtCl6 and PtCl2. the results indicated an over 90 % reduction of the platinum salts and TEM micrographs indicated the production of platinum nanoparticles under the various experimental conditions.
- Full Text:
- Date Issued: 2008
- Authors: Govender, Yageshni
- Date: 2008
- Subjects: Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3923 , http://hdl.handle.net/10962/d1003982 , Nanoparticles , Platinum , Fusarium oxysporum , Fungi , Hydragenase
- Description: Nanoparticles are microscopic particles in the nanometre range of between 1-100 nm. A wide variety of metal nanoparticles have been found to be produced by prokaryotic and eukaryotic organisms including several fungal species, when exposed to solutions containing metal salts. Previous studies have suggested that this bioreduction of metal particles may occur via an active reductase/hydrogenase enzyme process where H2 is the electron donor and positively charged platinum species act as the electron acceptors becoming reduced to a neutral metal nanoparticle. In view of this on going research, the current study investigated the “factors” in the fungus Fusarium oxysporum which were responsible for platinum nanoparticle formation. The fungus F.oxysporum was used in this study as it has been previously shown to produce a variety of nanoparticles including gold and silver. During exposure of the biomass to H2PtCl6 the initial response to the platinum salts was metal internalisation and subsequent reduction of H2PtCI6 to produce platinum nanoparticles. The observed localization and distribution of platinum precipitates provided some evidence for a hydrogenase mediated bioreduction of platinum salts to produce nanoparticles. Factors secreted by the fungus into the extracellular fluids, were shown to be responsible for platinum nanoparticle formation. From the identification, purification and characterisation studies it was concluded that a hydrogenase and other “factors” were responsible for platinum nanoparticle formation in F.oxysporum. Purification of the hydrogenase by freeze-drying and Sephacryl S200 size exclusion- ion exchange chromatography revealed the enzyme to be a dimer with a 29.4 and 44.5 kDa when analysed by a 10 % SDS-PAGE. Characterisation of the enzyme revealed optimal activity at a pH of 7.5 and temperature of 38 °C while it exhibited a poor thermal stability with a half life of 36 minutes. The kinetic parameters Vmax and Km were 3.16 U ml-1 and 3.64 mM respectively. The purified hydrogenase was used in subsequent experiments for the reduction of platinum salts, H2PtCl6 and PtCl2. the results indicated an over 90 % reduction of the platinum salts and TEM micrographs indicated the production of platinum nanoparticles under the various experimental conditions.
- Full Text:
- Date Issued: 2008
The bioaccumulation of platinum (IV) from aqueous solution using sulphate reducing bacteria: role of a hydrogenase enzyme
- Authors: Rashamuse, Konanani Justice
- Date: 2003
- Subjects: Sulfur bacteria , Bioremediation , Enzymes -- Metabolism , Platinum , Platinum compounds , Reduction (Chemistry) , Hydrogenation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4003 , http://hdl.handle.net/10962/d1004063 , Sulfur bacteria , Bioremediation , Enzymes -- Metabolism , Platinum , Platinum compounds , Reduction (Chemistry) , Hydrogenation
- Description: The enzymatic reduction of a high-valence form of metals to a low-valence reduced form has been proposed as a strategy to treat water contaminated with a range of metals and radionuclides. Metal reduction by sulphate reducing bacteria (SRB) is carried out either chemically (involving reduction by hydrogen sulphide) or enzymatically (involving redox enzymes such as the hydrogenases). While reduction of metal ions by hydrogen sulphide is well known, the enzymatic mechanism for metal reduction is poorly understood. The aims of this study were to investigate the role of SRB in facilitating platinum removal, and to investigate the role of a hydrogenase in platinum reduction in vitro. In order to avoid precipitation of platinum as platinum sulphide, a resting (non-growing) mixed SRB culture was used. The maximum initial concentration of platinum (IV), which SRB can effectively remove from solution was shown to be 50 mg.l⁻¹. Electron donor studies showed high platinum (IV) uptake in the presence of hydrogen, suggesting that platinum (IV) uptake from solution by SRB requires careful optimization with respect to the correct electron donor. Transmission electron microscopy (TEM) and energy dispersive X-ray (EDX) analysis indicated that platinum was being precipitated in the periplasm, a major area of hydrogenase activity in SRB. Purification of the hydrogenase by ammonium sulphate precipitation (65%), Toyopearl-Super Q 650S ion exchange and Sephacry 1 S-100 size exclusion chromatography revealed that the hydrogenase was monomeric with a molecular weight of 58 KDa, when analyzed by 12% SDS-PAGE. The purified hydrogenase showed optimal temperature and pH at 35°C and 7.5 respectively, and a poor thermal stability. In vitro investigation of platinum reduction by purified hydrogenase from mixed SRB culture showed that hydrogenase reduces platinum only in the presence of hydrogen. Major platinum (IV) reduction was observed when hydrogenase was incubated with cytochrome C₃ (physiological electron carrier in vivo) under hydrogen. The same observations were also noted with industrial effluent. Collectively these findings suggest that in vitro platinum reduction is mediated by hydrogenase with a concerted action of cytochrome C₃ required to shuttle the electron from hydrogenase.
- Full Text:
- Date Issued: 2003
- Authors: Rashamuse, Konanani Justice
- Date: 2003
- Subjects: Sulfur bacteria , Bioremediation , Enzymes -- Metabolism , Platinum , Platinum compounds , Reduction (Chemistry) , Hydrogenation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4003 , http://hdl.handle.net/10962/d1004063 , Sulfur bacteria , Bioremediation , Enzymes -- Metabolism , Platinum , Platinum compounds , Reduction (Chemistry) , Hydrogenation
- Description: The enzymatic reduction of a high-valence form of metals to a low-valence reduced form has been proposed as a strategy to treat water contaminated with a range of metals and radionuclides. Metal reduction by sulphate reducing bacteria (SRB) is carried out either chemically (involving reduction by hydrogen sulphide) or enzymatically (involving redox enzymes such as the hydrogenases). While reduction of metal ions by hydrogen sulphide is well known, the enzymatic mechanism for metal reduction is poorly understood. The aims of this study were to investigate the role of SRB in facilitating platinum removal, and to investigate the role of a hydrogenase in platinum reduction in vitro. In order to avoid precipitation of platinum as platinum sulphide, a resting (non-growing) mixed SRB culture was used. The maximum initial concentration of platinum (IV), which SRB can effectively remove from solution was shown to be 50 mg.l⁻¹. Electron donor studies showed high platinum (IV) uptake in the presence of hydrogen, suggesting that platinum (IV) uptake from solution by SRB requires careful optimization with respect to the correct electron donor. Transmission electron microscopy (TEM) and energy dispersive X-ray (EDX) analysis indicated that platinum was being precipitated in the periplasm, a major area of hydrogenase activity in SRB. Purification of the hydrogenase by ammonium sulphate precipitation (65%), Toyopearl-Super Q 650S ion exchange and Sephacry 1 S-100 size exclusion chromatography revealed that the hydrogenase was monomeric with a molecular weight of 58 KDa, when analyzed by 12% SDS-PAGE. The purified hydrogenase showed optimal temperature and pH at 35°C and 7.5 respectively, and a poor thermal stability. In vitro investigation of platinum reduction by purified hydrogenase from mixed SRB culture showed that hydrogenase reduces platinum only in the presence of hydrogen. Major platinum (IV) reduction was observed when hydrogenase was incubated with cytochrome C₃ (physiological electron carrier in vivo) under hydrogen. The same observations were also noted with industrial effluent. Collectively these findings suggest that in vitro platinum reduction is mediated by hydrogenase with a concerted action of cytochrome C₃ required to shuttle the electron from hydrogenase.
- Full Text:
- Date Issued: 2003
- «
- ‹
- 1
- ›
- »