An analysis of regulatory mechanisms during sustained task execution in cognitive, motor and sensory tasks
- Authors: Tau, Sethunya Harriet Hlobisa
- Date: 2013 , 2013-10-11
- Subjects: Work -- Physiological aspects , Work -- Psychological aspects , Fatigue , Attention , Mental fatigue , Human information processing , Decision making , Labor productivity , Employees -- Workload , Performance
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5140 , http://hdl.handle.net/10962/d1006806 , Work -- Physiological aspects , Work -- Psychological aspects , Fatigue , Attention , Mental fatigue , Human information processing , Decision making , Labor productivity , Employees -- Workload , Performance
- Description: Fatigue is a state that, although researched for many years, is still not completely understood. Alongside this lack of a general understanding of fatigue is a lack of knowledge on the processes involved in the regulation of fatigue. The existing theories relating to regulation are focussed on mental effort regulation, suggesting that performance outcomes are co-ordinated by effort regulation that functions by making alterations to physiological processes and strategic adjustments at a cognitive level in response to cognitive demands and goals. Since fatigue is a multi-dimensional construct with psychological, physiological, and behavioural effects that respond to endogenous and exogenous variables, it follows then that fatigue assessment techniques ought to include multi-dimensional measures to acquire a holistic depiction of the fatigue symptom. This study aimed to assess whether or not a mechanism that regulated fatigue during sustained task execution could be identified and whether this mechanism resulted in regulation patterns that were distinct to a specific task. An additional aim of the study was on assessing whether the manner in which performance, psychophysical and subjective variables were modified over time followed a similar regulation pattern. The research design was aimed at inducing task-related fatigue twice on two different occasions in the same participants and evaluating the resultant changes in fatigue manifestation. This was done to assess the ability of participants to cope with fatigue as a result of previous experience. The research protocol included three tasks executed for an hour aimed at targeting and taxing the sensory, cognitive, motor resources, each task performed twice. 60 participants were recruited to participate in the current study, with 20 participants – 10 males and 10 females – randomly assigned to each of the three tasks. The cognitive resource task consisted of a memory recall task relying on working memory intended to evaluate the extent of reductions in memory and attention. The sensory resource task consisted of a reading task measuring visual scanning and perception designed to evaluate the extent of reduced vigilance. The motor resource task consisted of a modified Fitts’ stimulus response task targeted at monitoring the extent of movement timing disruption. Performance measures comprised of: response delay and the number of correctly identified digits during the cognitive resource task, the amount of correctly identified errors and reading speed during the sensory resource task, response time during the motor resource task, and responses to simple auditory reaction time tests (RTT) initiated at intervals during the task and then again at the end of each task. Physiological measures included ear temperature, eye blink frequency and duration, heart rate (HR), and heart rate variability (HRV). Subjective measures included the use of the Ratings of Perceived Exertion Category Ratio 10 scale (RPE CR 10) to measure cognitive exertion and the NASA-Task Load Index (NASA-TLX) to index mental workload. Eye blink frequency and duration, HR and HRV were sensitive to the type of task executed, showing differing response patterns both over the different tasks and over the two test sessions. The subjective measures indicated increasing RPE ratings over time in all tasks while the NASA-TLX indicated that each task elicited different workloads. Differing task performance responses were measured between the 1st test session and the 2nd test session during all tasks; while performance was found to improve during the 2nd test session for the motor and sensory tasks, it declined during the cognitive task. The findings of this research indicate that there was a regulatory mechanism for fatigue that altered the manner in which performance, psychophysical and subjective variables were modified over time, initiating a unique fatigue regulation pattern for each variable and each task. This regulation mechanism is understood to be a proactive and protective mechanism that functions through reducing a person’s ability to be vigilant, attentive, to exercise discernment, and to direct their level of responsiveness, essentially impacting how the body adapts to and copes with fatigue. The noted overall findings have industry implications; industries should consider accounting for the effects of this regulatory mechanism in their fatigue management interventions, specifically when designing job rotation and work/rest schedules because each cognitive task, having elicited a unique fatigue regulation pattern, ought to also have a different management program. , Microsoft� Office Word 2007 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
Awkward working postures and precision performance as an example of the relationship between ergonomics and production quality
- Authors: Ngcamu, Nokubonga Slindele (Sma)
- Date: 2009
- Subjects: Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5105 , http://hdl.handle.net/10962/d1005183 , Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Description: Ergonomics aims to improve worker health and enhance productivity and quality. Knowledge and practical evidence of this relationship would be instrumental for optimising organisational performance particularly in industrially developing countries where the discipline is still in its developmental stages. Therefore this thesis set out to analyse the relationship between ergonomics deficiencies and performance. A survey was first conducted to establish the severity of quality problems in the South African manufacturing industry and to determine if these were related to Ergonomic deficiencies. The results indicated that quality problems continue to plague industry, a challenge associated with huge cost implications. Furthermore organisations were not cognisant of the fact that ergonomics deficiencies such as poor workstation design and awkward or constrained working postures are a major contributing factor to poor quality and performance decrements. This demonstrates that much is yet to be done in raising awareness about the benefits of ergonomics in South Africa and other industrially developing countries. However, for this to be effective, tangible evidence of these purported benefits is required. In lieu of this, a laboratory study was then conducted to establish the relationship between awkward working postures and the performance of precision tasks. Acknowledging that the task and the worker are interrelated elements, the impact of precision task demands on the postural strain experienced by the human was also investigated. A high and low precision task quantified positional precision while a force task (combination of pushing and pulling) was utilised to assess the ability to maintain a precise force over time. These three tasks were performed in eight different postures; namely seated, standing, stooping 300 and 600, working overhead, lying supine, and twisting to either side. A combination of the tasks and postures resulted in 24 experimental conditions that were tested on forty eight healthy male and female participants. The performance related dependent variables were movement time, deviation from the centre of the target, and the trend/slope followed by the force exerted. Muscle activity of eight arm, shoulder and back muscles, iii supplemented with heart rate and local ratings of perceived exertion, were utilised to quantify the impact of the tasks and the postures on the individual. The results revealed that awkward working postures do in fact influence performance outcomes. In this regard, awkward working postures (such as overhead work and lying supine and stooping) were evidenced to significantly affect movement time, deviations from the target and the ability to maintain a constant force over time. These variables have a direct relationship with organisational priorities such as productivity and quality. Furthermore, the results indicated that high precision demands augment postural strain elicited through high muscle activity responses and may have negative implications for the precipitation of musculoskeletal disorders. Essentially, the work done on this thesis reflected the complex nature of ergonomics by drawing on both macro and micro-ergonomics approaches. In so doing, challenges perceived to be relevant to industry as reported by organisations formed the foundation for further laboratory studies. Therefore, more collaborative research and knowledge transfer between industry and ergonomics researchers is a necessity particularly in industrially developing countries where ergonomics is still in its developmental stages.
- Full Text:
- Date Issued: 2009
The effect of load and technique on biomechanical and perceptual responses during dynamic pushing and pulling
- Authors: Desai, Sheena Dhiksha
- Date: 2009
- Subjects: Work -- Physiological aspects , Biomechanics , Human engineering , Lifting and carrying
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5109 , http://hdl.handle.net/10962/d1005187 , Work -- Physiological aspects , Biomechanics , Human engineering , Lifting and carrying
- Description: Changes in the industrial job profile, from lifting and lowering to repetitive dynamic pushing and pulling have been facilitated through the use of manual vehicles, aimed at minimising the workload. Yet, the demands of pushing and pulling have not been well documented. Using measures of the horizontal component of the hand forces, spinal kinematics, muscle activity at various sites on the upper body and body discomfort ratings, this study aimed at quantifying the biomechanical and perceptual demands of various dynamic push/pull techniques. 36 healthy male participants performed two-handed forward pushing, two-handed backward pulling and one-handed forward pulling, employing an industrial pallet jack supporting two loads of 250kg or 500kg. While no single technique was definitively identified as preferable regarding hand forces, pushing at 500kg elicited higher initial and sustained forces (p<0.05) than one- and two-handed pulling respectively. Increments in load mass from 250kg to 500kg resulted in significant differences in the initial, sustained and ending forces. With regard to spinal kinematics in the sagittal plane, two-handed pulling elicited the highest trunk flexion, and may therefore expose individuals to prolonged forward bending. Generally this technique was found to evoke the highest sagittal responses. Spinal kinematic measures in the lateral and transverse planes suggested that one-handed pulling was accompanied by the highest measures, and hence the greatest risk of developing lower back disorders related to this plane. Although various combinations of muscles were active during each technique, one-handed pulling and pushing, most often induced the highest muscle activation levels and two-handed pulling, the lowest. While erector spinae evidenced no significant differences between techniques at each load or between loads for the same technique, activation levels were high under all conditions. Perceptual ratings of body discomfort revealed that not only is the upper body susceptible to injuries during pushing and pulling, but also that the lower extremities may have a considerable role to play in these tasks, with the calves being a particular area of concern. Findings concluded that symmetrical pushing and pulling tasks are preferable.
- Full Text:
- Date Issued: 2009
The effect of load and technique on biomechanical and psychophysical responses to level dynamic pushing and pulling
- Authors: Bennett, Anthea Iona
- Date: 2009
- Subjects: Work -- Physiological aspects , Human engineering -- Case studies , Lifting and carrying -- Case studies , Biomechanics -- Case studies , Musculoskeletal system -- Wounds and injuries
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5110 , http://hdl.handle.net/10962/d1005188 , Work -- Physiological aspects , Human engineering -- Case studies , Lifting and carrying -- Case studies , Biomechanics -- Case studies , Musculoskeletal system -- Wounds and injuries
- Description: Pushing and pulling research has yet to fully elucidate the demands placed on manual workers despite established epidemiological links to musculoskeletal disorders. The current study therefore aimed to quantify biomechanical and perceptual responses of male operators to dynamic pushing and pulling tasks. Three common push/pull techniques (pushing, one handed and two handed pulling) were performed at loads of 250kg and 500kg using an industrial pallet jack in a laboratory environment. Thirty six healthy male subjects (age: 21 ±2 years, stature: 1791 ±43 mm and body mass: 77 ±10 kg) were required to perform six loaded experimental and two unloaded control conditions. Hand force exertion, muscle activity and gait pattern responses were collected during 10m push/pull trials on a coefficient controlled walkway; body discomfort was assessed on completion of the condition. Horizontal hand force responses were significantly (p<0.05) affected by load, with a linear relationship existing between the two. This relationship is determined by specific environmental and trolley factors and is context specific, depending on factors such as trolley maintenance and type of flooring. Hand force exertion responses were tenuously affected by technique at higher loads in the initial and sustained phases, with pushing inducing the greatest hand forces. Comparison of the motion phases revealed significant differences between all three phases, with the initial phase evidencing the greatest hand forces. Muscle activity responses demonstrated that unloaded backward walking evoked significantly higher muscle activation than did unloaded forward walking whilst increased muscular activity during load movement compared to unloaded walking was observed. However increasing load from 250kg to 500kg did not significantly impact the majority of muscle activity responses. When considering technique effects on muscle activity, of the significant differences found, all indicated that pushing imposed the least demand on the musculoskeletal system. Gait pattern responses were not significantly affected by load/technique combinations and were similar to those elicited during normal, unloaded walking. Perceptually, increased load led to increased perception of discomfort while pushing resulted in the least discomfort at both loads. From these psychophysical responses, the calves, shoulders and biceps were identified as areas of potential musculoskeletal injury, particularly during one and two handed pulling. Pushing elicited the highest hand forces and the lowest muscle activity responses in the majority of the conditions whilst psychophysical responses identified this technique as most satisfactory. Current results advocate the use of pushing when moving a load using a wheeled device. Suitability of one and two handed pulling remains contradictory, however results suggest that one handed pulling be employed at lower loads and two handed pulling at higher loads.
- Full Text:
- Date Issued: 2009
The effect of restricted environments on selected postural, physiological and perceptual responses
- Authors: Wolfe, Amy
- Date: 2008
- Subjects: Human engineering , Posture , Human mechanics , Work environment , Human beings -- Effect of environment on , Musculoskeletal system -- Wounds and injuries , Industrial safety , Work -- Physiological aspects , Stress (Physiology)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5115 , http://hdl.handle.net/10962/d1005193 , Human engineering , Posture , Human mechanics , Work environment , Human beings -- Effect of environment on , Musculoskeletal system -- Wounds and injuries , Industrial safety , Work -- Physiological aspects , Stress (Physiology)
- Description: Manual lifting tasks are the predominant means of transporting materials in industry with many of these tasks being performed in confined spaces. Research has tended to focus on the biomechanical implications of working in small spaces with a decided lack of information about the physiological and perceptual responses in these environments. This holistic study therefore investigated the manner in which the human operator responded to conditions where the ceiling height was lowered and reach demands increased. Thirty-two young physically active male subjects (age: 21.55yr; stature: 1810mm) were recruited to complete a 2-way repeated measures experiment during which four lifting protocols where different combinations of ceiling height (‘normal’ or reduced to 1460mm in height) and reach demands (400mm or 800mm) were tested. A crude postural analysis was conducted while physiological responses were detailed and continuously monitored. Perceptual responses were also assessed. The tasks with a ‘normal’ ceiling height (mean compression forces: 2615N; mean shearing forces: 388N) and the greatest reach distance (mean compression forces: 3655N; mean shearing forces: 386N) placed individuals under the highest strain. Mean heart rate (HR) responses were significantly lower (p < 0.05) in the URN condition when compared to the RF condition. Furthermore, HR responses were statistically significantly affected by the height of the ceiling and the reach depth. Statistically significant differences (p< 0.05) in mean tidal volume (VT) occurred in the least (URN) and most (RF) restrictive conditions. Statistically significant differences (p < 0.05) in mean VE were evident between URN and URF, between URN and RF and between RN and RF. Ceiling height and reach demands had a statistically significant effect on all respiratory responses. There was a statistically significant difference in mean oxygen consumption (VO2) between the URN and all other conditions, and between the most restricted task (RF) and all other conditions. Both the effect of ceiling height and reach demands had a statistically statistically significant impact on VO2. Respiratory quotient (RQ) was significantly higher when loads were moved over 800mm compared to 400mm yet ceiling height did not have a statistically significant effect on RQ. Mean energy expenditure was significantly higher in the RF condition compared to the two least restrictive conditions (URN and RN). Statistically significant differences in EE were also evident between URN and RN, and between URN and URF. EE was significantly affected by reductions in ceiling height and increases in reach demands. Perceptually, the RF task (mean ‘Central’ RPE of 11) was perceived to place significantly greater cardiorespiratory demands on the operator compared to the URN (CRPE: 10) and RN (CRPE: 10) conditions. Statistically significant differences in perceived musculoskeletal strain only occurred between URN and RF. The effect of reach was perceived to have a statistically significant effect on both cardiovascular and musculoskeletal demands whereas ceiling height only had a statistically significant effect on musculoskeletal demands. The greatest discomfort was experienced in the lower back with the most intense discomfort occurring in the RN condition.
- Full Text:
- Date Issued: 2008
Combined and additive effects of assembly tasks and constrained body postures
- Authors: Skelton, Sarah Anne
- Date: 2007
- Subjects: Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5107 , http://hdl.handle.net/10962/d1005185 , Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Description: Despite extensive research into musculoskeletal disorders (MSDs) they continue to plague workers. Manual materials handling (MMH), in particular the concurrence of load manipulation and awkward body posture, has been identified as a key factor in the onset of MSDs. Only a few studies have looked at the interaction between manipulation tasks and working posture during assembly tasks and as a result their relationship has not been widely explored. Assessing the stresses resulting from individual task factors and body posture in isolation and adding them together may be too simplified to estimate an overall risk profile, since this does not take into account that there may be a non-linear interaction in strain responses when manipulation task and body posture interact. Therefore, the present study investigated biophysical, physiological and psychophysical responses to combined tasks, rather than individual tasks of body posture and manipulative tasks. The objective of the research was to establish the interactive effects of constrained body postures and manipulative tasks and to identify whether a cumulative or compensatory reaction occurs during this interaction. Nine conditions were assessed in a laboratory setting, which included combinations of three working postures (standing, sitting and stooping) and three assembly tasks (torque wrenching, precision and no task). Thirty-six subjects were required to complete all nine conditions, with each condition lasting ninety seconds. Muscle activity was recorded for seven muscles from the upper extremity, trunk and lower extremity regions and was complemented by physiological (heart rate, tidal volume, minute ventilation, oxygen consumption, energy expenditure and breathing frequency) and psychophysical (body discomfort) data. At the completion of all nine conditions subjects completed a retrospective psychophysical rating questionnaire pertaining to discomfort felt during the conditions. Responses obtained for the different task and posture combinations revealed compensatory reactions (additive > combined) for most of the conditions assessed for the biomechanical and physiological responses. In the majority of cases for muscle activity, no significant differences were found between the combined and the additive effects (p < 0.05), while for the physiological responses there were mostly significant differences observed. Psychophysical responses indicated that there was a significant difference overall between the additive and combined effects. The results of this study demonstrate that in order to identify risk areas, manipulation tasks and constrained working postures may be considered either in isolation and added together (additive) or as a combined task, since there were very few significant differences observed between these two effects. Further studies are required, however, to provide conclusive evidence.
- Full Text:
- Date Issued: 2007
Laboratory investigation of a load carriage task observed in forestry
- Authors: Furney, Sheena Elizabeth
- Date: 2007
- Subjects: Work -- Physiological aspects , Foresters -- Workload , Human engineering , Lifting and carrying
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5145 , http://hdl.handle.net/10962/d1008188 , Work -- Physiological aspects , Foresters -- Workload , Human engineering , Lifting and carrying
- Description: The objective of the present study was to investigate and compare the human responses to two load carriage tasks performed with three different load masses and on three different gradients. The task of carrying hydrogel in one hand was observed in a silviculture industry and crude physiological and perceptual responses were measured. This task was simulated in a laboratory setting together with a suggested intervention of backpack carriage. Eighteen conditions were established which consisted of the two modes of carriage and a combination of three load masses (9kg, 12kg and 15kg) and three gradients (5%, 10% and 15%). Twenty eight Rhodes University female students comprised the sample and the experimental procedures were conducted on a Quinton treadmill. Each participant was required to complete nine of the eighteen conditions which were each four minutes in duration. Postural changes were assessed using lateral and posterior digital images taken at the second and fourth minute and compression and shearing forces were estimated with the ErgolmagerTM Physiological responses (heart rate, ventilation and metabolic responses) were measured continuously with the Quark b² and perceptual responses ('central' and 'local' RPE) were measured every minute during the experimentation and body discomfort was rated at the completion of each condition. Overall responses revealed that hand carriage (146 bt.min⁻¹ , 25.09 mIO₂. kg-l.min⁻¹) was generally found to be more physiologically stressful than backpack carriage (130 bt.min⁻¹, 22.15 mIO₂.kg⁻¹ .min⁻¹) independent of load mass and gradient. Physiological responses were higher (113 bt.min-1 to 174 bt.min⁻¹ ) in responses to increasing gradient as opposed to increasing load mass (104 bt.min-1 to 153 bt.min⁻¹ ) for both backpack and hand carriage. Categorisation using the guidelines of Sanders and McCormick (1993) allowed for classification of conditions, with respect to physiological responses, into 'moderate', 'heavy' and 'very heavy' stress. For almost all of the physiological responses the majority of conditions which were classified as 'moderate' were backpack carriage conditions and the conditions classified as 'very heavy' were mostly hand carriage conditions. In terms of postural responses hand carriage resulted in more strain and greater compression and shearing forces on the spine. In terms of the compression forces increasing gradient had a greater affect on backpack carriage (681 N to 935 N) compared to hand carriage (570N to 793N). In contrast, increasing load mass had a larger affect on hand carriage postures and compression forces (751 N to 935N) in comparison to backpack carriage (723N to 780N). Shearing forces were found to be worse in hand carriage conditions overall. Although participants generally underrated perceived exertion in relation to cardiorespiratory responses, these perceptions revealed that backpack carriage, with a mean 'central' RPE of 12 compared to 11 for hand carriage, was somewhat preferred to hand carriage and that increasing gradient was perceived to be marginally more straining than increasing load mass.
- Full Text:
- Date Issued: 2007
The impact of load and frequency on the biomechanical, physiological and perceptual responses to dynamic pushing
- Authors: Cripwell, Adam Michael
- Date: 2007
- Subjects: Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5144 , http://hdl.handle.net/10962/d1008183 , Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Description: The objective of the present research was to establish the biomechanical, physiological and perceptual responses of male operators to dynamic pushing tasks. The pushing tasks were performed using an industrial pallet jack with varying load/frequency combinations, in a controlled laboratory environment. Thirty healthy male subjects comprised the sample. Experimental procedures were conducted utilising the Chatillon ™ Dynamometer to measure force output in the initial, sustained and ending phases. The K4b2 Ergospirometer was used to assess physiological responses (heart rate and oxygen consumption [V02])' Nine recorded forces and nine experimental conditions formed the basis of this study, with subjects required to push three loads (200kg, 350kg, 500kg) at three frequencies (1120 sec, 1/40 sec, 1/60 sec) at a speed of 3.6km.h-1 over 14 metres on a co-efficient of friction controlled walkway for six minutes. Gait analysis, along with perceptions of exertion (,Central ' and 'Local' RPE) were collected during the third and sixth minutes of each condition . Body discomfort and contribution were identified upon completion of each condition. The results demonstrated that load and frequency interacted to influence responses within each domain. Increasing loads required increased force output during each stage of the push, which had a concomitant effect on physiological and perceptual responses. Significant differences arose between the initial, sustained and ending forces for each load, showing the direct relationship between load and force exertion. The combination of heaviest load/quickest frequency required the greatest physiological output, exceeding recommended guidelines for heart rate, V02 and energy expenditure responses. Intermediate combinations required moderate and acceptable energy cost. Linear relationships were established between heart rate and oxygen consumption , as well as between load and V02 , thus providing industrial practitioners an opportunity to evaluate task demands in situ. The combination of high forces and elevated physiological responses increased the subjective rating of the condition. The results emphasise the need to holistically consider all contributing factors in a dynamic pushing task. Dynamic pushing tasks place biomechanical, physiological and perceptual demands on the human operator, which must be minimised in order to ensure that this form of manual materials handling becomes sustainable in the long term.
- Full Text:
- Date Issued: 2007