Bioaccumulation of metal cations by yeast and yeast cell components
- Authors: Brady, Dean
- Date: 1993
- Subjects: Yeast , Yeast fungi -- Biotechnology , Cations , Metal ions
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4046 , http://hdl.handle.net/10962/d1004107 , Yeast , Yeast fungi -- Biotechnology , Cations , Metal ions
- Description: The aim of the project was to determine whether a by-product of industrial fermentations, Saccharomyces cerevisiae, could be utilized to bioaccumulate heavy metal cations and to partially define the mechanism of accumulation. S. cerevisiae cells were found to be capable of accumulating Cu²⁺in a manner that was proportional to the external Cu²⁺ concentration and inversely proportional to the concentration of biomass. The accumulation process was only minimally affected by temperature variations between 5 and 40°C or high ambient concentrations of sodium chloride. The accumulation process was however considerably affected by variations in pH, bioaccumulation being most efficient at pH 5 - 9 but becoming rapidly less so at either extreme of pH. Selection for copper resistant or tolerant yeast diminished the yeast's capacity for Cu²⁺ accumulation. For this and other reasons the development of heavy metal tolerance in yeasts was deemed to be generally counterproductive to heavy metal bioaccumulation. The yeast biomass was also capable of accumulating other heavy metal cations such as c0²⁺ or Cd²⁺. The yeast biomass could be harvested after bioaccumulation by tangential filtration methods, or alternatively could be packed into hollow fibre microfilter membrane cartridges and used as a fixed-bed bioaccumulator. By immobilizing the yeast in polyacrylamide gel and packing this material into columns, cu²⁺, C0²⁺ or Cd²⁺ could be removed from influent aqueous solutions yielding effluents with no detectable heavy metal, until breakthrough point was reached. This capacity was hypothesized to be a function of numerous "theoretical plates of equilibrium" within the column. The immobilized biomass could be eluted with EDTA and recycled for further bioaccumulation processes with minor loss of bioaccumulation capacity. Yeast cells were fractionated to permit identification of the major cell fractions and molecular components responsible for metal binding. Isolation of the yeast cell walls permitted investigation of their role in heavy metal accumulation. Although the amino groups of chitosan and proteins, the carboxyl groups of proteins, and the phosphate groups of phosphomannans were found to be efficient groups for the accumulation of copper, the less effective hydroxyl groups of the carbohydrate polymers (glucans and mannans) had a similar overall capacity for copper accumulation owing to their predominance in the yeast cell wall. The outer (protein-mannan) layer of the yeast cell wall was found to be a better Cu²⁺ chelator than the inner (chitinglucan) layer. It appeared that the physical condition of the cell wall may be more important than the individual macromolecular components of the cell wall in metal accumulation. It was apparent that the cell wall was the major, if not the sole contributor to heavy metal accumulation at low ambient heavy metal concentrations. At higher ambient metal concentrations the cytosol and vacuole become involved in bioaccumulation. Copper and other metals caused rapid loss of 70% of the intracellular potassium, implying permeation of the plasma membrane. This was followed by a slower "leakage" of magnesium from the vacuole which paralleled Cu²⁺ accumulation, suggesting that it may represent some form of ion-exchange. An intracellular copper chelating agent of approximately 2 kDalton molecular mass was isolated from copper tolerant yeast. This chelator was not a metallothionein and bound relatively low molar equivalents of copper compared to those reported for metallothionein. Treatment of the biomass with hot alkali yielded two biosorbents, one soluble (which could be used as a heavy metal flocculent), and an insoluble biosorbent which could be formed into a granular product to be used in fixed-bed biosorption columns. The granular biosorbent could accumulate a wide range of heavy metal cations in a semispecific manner and could be stored in a dehydrated form indefinitely, and rehydrated when required. Bioaccumulation by live algae was investigated as an alternative to yeast based processes. Various strains of algae, of which Scenedesmus and Selenastrum were the most effective, were found to be capable of accumulating heavy metals such as Cu²⁺, Pb²⁺ and Cr³⁺.
- Full Text:
- Date Issued: 1993
The effect of hydrostatic carbon dioxide pressure and extracellular ethanol on the performance of the yeast strain Saccharomyces cerevisiae during fermentation
- Authors: Longden, Nicholas Guy
- Date: 1993
- Subjects: Brewing -- Microbiology , Yeast , Fermentation , Saccharomyces cerevisiae
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4044 , http://hdl.handle.net/10962/d1004105 , Brewing -- Microbiology , Yeast , Fermentation , Saccharomyces cerevisiae
- Description: The brewing industry constantly experiences problems in trying to maintain the quality of beer produced. Unfavourable conditions during fermentation may alter the performance of the yeast strain Saccharomyces cerevisiae, resulting in a "poor" end-product. It has been established that high concentrations of extracellular ethanol, when added to the fermentation medium inhibit yeast activity. It has been recently suggested that increased carbon dioxide pressure could inactivate the yeast activity adding to further brewing problems. The aim of this study was to investigate the effect of extracellular carbon dioxide pressure and ethanol addition, on yeast performance when added to a fermentation medium, and to establish whether an inhibitory relationship existed between ethanol and carbon dioxide pressure, when combined and added to the fermentation medium. Dissolved C0₂ in the medium, medium pH and substrate utilisation were analysed daily during a fermentation, as were membrane fatty acid composition. These parameters were used to assess the effect of ethanol and carbon dioxide on the yeast performance and consequently the final end-product. Supplementing the medium with extracellular ethanol, even as low as 5%, was shown to inhibit yeast performance during fermentation. This effect was even more marked as the ethanol concentration was increased, with almost total inhibition of yeast activity occuring after the addition of 15% ethanol (v/v). A similar effect was observed when elevated C0₂ pressures were applied to the medium, and although low C0₂ pressures initially induced the synthesis of saturated yeast membrane fatty acids, elevated C0₂ pressures (greater than 1,0 atm.) was shown to follow a similar inhibitory trend, if not as dramatic, as ethanol. A combination of both ethanol and C0₂ pressure showed a further increase in the level of yeast inhibition, although the low C0₂ pressure appeared to initially inhibit the toxicity of ethanol on the yeast. Increasing the levels of the C0₂/ethanol treatment (1,0 atm.), showed a synergistic effect on yeast performance. The results of this study indicate that both extracellular ethanol and carbon dioxide do appear to inhibit yeast performance and affect membrane fatty acid composition of the cells by inhibiting the synthesis of the respective fatty acid. This affect has a significant bearing on the general metabolism of the yeast cell.
- Full Text:
- Date Issued: 1993