Macrofaunal community structure in the littoral zone of a freshwater-deprived, permanently open Eastern Cape estuary
- Henninger, Tony O, Froneman, P William
- Authors: Henninger, Tony O , Froneman, P William
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/443954 , vital:74174 , https://doi.org/10.1080/15627020.2011.11407500
- Description: Spatial patterns in the macrofauna community structure within four distinct zones of the permanently open, freshwater-deprived Kariega Estuary on the southeastern coastline of southern Africa were investigated in March–May 2010. The zones within the littoral zone comprised a band of Zostera capensis (Setchell) exposed at spring low tide and comprising Zone I; a band of mud or sand, lacking vegetation, corresponded to Zone II; stands of Spartina maritima (Curtis) formed Zone III and a belt of Sarcocornia perennis (Miller) constituted Zone IV.
- Full Text:
- Date Issued: 2011
- Authors: Henninger, Tony O , Froneman, P William
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/443954 , vital:74174 , https://doi.org/10.1080/15627020.2011.11407500
- Description: Spatial patterns in the macrofauna community structure within four distinct zones of the permanently open, freshwater-deprived Kariega Estuary on the southeastern coastline of southern Africa were investigated in March–May 2010. The zones within the littoral zone comprised a band of Zostera capensis (Setchell) exposed at spring low tide and comprising Zone I; a band of mud or sand, lacking vegetation, corresponded to Zone II; stands of Spartina maritima (Curtis) formed Zone III and a belt of Sarcocornia perennis (Miller) constituted Zone IV.
- Full Text:
- Date Issued: 2011
Microelectrochemical patterning of gold surfaces using 4-azidobenzenediazonium and scanning electrochemical microscopy
- Coates, Megan, Cabet, Eva, Griveau, Sophie, Nyokong, Tebello, Bedioui, Fethi
- Authors: Coates, Megan , Cabet, Eva , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247926 , vital:51630 , xlink:href="https://doi.org/10.1016/j.elecom.2010.11.037"
- Description: This work describes for the first time the possibility of performing local micro electrochemical grafting of a gold substrate by 4-azidobenzenediazonium by SECM in a single and simple one step without complications from adsorption. The electrografted spots of diazonium were performed by positioning a Pt tip at a given distance above the gold substrate and the SECM was used in a three-electrode configuration (the Pt tip serving as the microanode) in acetonitrile containing 5 mM 4-azidobenzenediazonium and 0.1 M Bu4NBF4 during 10 ms. The dimensions of the derivatized areas of the substrates were finely tuned by using different experimental conditions (tip distance above the substrate, tip diameter, presence or absence of supporting electrolyte). The use of the azido-derivated diazonium molecule and these preliminary results open the gate to important applications and developments devoted to the local micro functionalization of electrodes by thin layers that allow the implementation of the emerging and attractive interfacial click reaction.
- Full Text:
- Date Issued: 2011
- Authors: Coates, Megan , Cabet, Eva , Griveau, Sophie , Nyokong, Tebello , Bedioui, Fethi
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247926 , vital:51630 , xlink:href="https://doi.org/10.1016/j.elecom.2010.11.037"
- Description: This work describes for the first time the possibility of performing local micro electrochemical grafting of a gold substrate by 4-azidobenzenediazonium by SECM in a single and simple one step without complications from adsorption. The electrografted spots of diazonium were performed by positioning a Pt tip at a given distance above the gold substrate and the SECM was used in a three-electrode configuration (the Pt tip serving as the microanode) in acetonitrile containing 5 mM 4-azidobenzenediazonium and 0.1 M Bu4NBF4 during 10 ms. The dimensions of the derivatized areas of the substrates were finely tuned by using different experimental conditions (tip distance above the substrate, tip diameter, presence or absence of supporting electrolyte). The use of the azido-derivated diazonium molecule and these preliminary results open the gate to important applications and developments devoted to the local micro functionalization of electrodes by thin layers that allow the implementation of the emerging and attractive interfacial click reaction.
- Full Text:
- Date Issued: 2011
Morphology and identification of first instars of African blow flies (Diptera: Calliphoridae) commonly of forensic importance
- Szpila, Krzysztof, Villet, Martin H
- Authors: Szpila, Krzysztof , Villet, Martin H
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/442225 , vital:73968 , https://doi.org/10.1603/ME10238
- Description: Scanning electron microscopy images of the first instars of Calliphora croceipalpis Jaennicke, 1876; Chrysomya chloropyga (Wiedemann, 1818); Chrysomya marginalis (Wiedemann, 1830); and Chrysomya putoria (Wiedemann, 1830) (Diptera: Calliphoridae) are presented for the first time, and the following morphological structures are documented: pseudocephalon, antenna, maxillary palpus, facial mask, labial lobe, thoracic and abdominal spinulation, spiracular field, posterior spiracles, and anal pads. Light microscopy photographs and line illustrations are provided for the cephaloskeleton in lateral and ventral views, and the “ectostomal sclerite” and “chitinized teeth” of the cephaloskeleton are recognized as integral parts of the mouthhooks. New diagnostic features of the cephaloskeleton and the spinulation of the abdominal segments are described. These results allow refinement, clarification, and correction of earlier descriptions, which are reviewed. The relative taxonomic importance of various morphological characters of the first instars of necrophagous blow flies is discussed, and details of the cephaloskeleton and the spinulation of the abdominal segments are highlighted as the characters most useful for species identification. Finally, a key for identifying first instars of common African carrion blow flies is provided.
- Full Text:
- Date Issued: 2011
- Authors: Szpila, Krzysztof , Villet, Martin H
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/442225 , vital:73968 , https://doi.org/10.1603/ME10238
- Description: Scanning electron microscopy images of the first instars of Calliphora croceipalpis Jaennicke, 1876; Chrysomya chloropyga (Wiedemann, 1818); Chrysomya marginalis (Wiedemann, 1830); and Chrysomya putoria (Wiedemann, 1830) (Diptera: Calliphoridae) are presented for the first time, and the following morphological structures are documented: pseudocephalon, antenna, maxillary palpus, facial mask, labial lobe, thoracic and abdominal spinulation, spiracular field, posterior spiracles, and anal pads. Light microscopy photographs and line illustrations are provided for the cephaloskeleton in lateral and ventral views, and the “ectostomal sclerite” and “chitinized teeth” of the cephaloskeleton are recognized as integral parts of the mouthhooks. New diagnostic features of the cephaloskeleton and the spinulation of the abdominal segments are described. These results allow refinement, clarification, and correction of earlier descriptions, which are reviewed. The relative taxonomic importance of various morphological characters of the first instars of necrophagous blow flies is discussed, and details of the cephaloskeleton and the spinulation of the abdominal segments are highlighted as the characters most useful for species identification. Finally, a key for identifying first instars of common African carrion blow flies is provided.
- Full Text:
- Date Issued: 2011
Ontogenetic dietary shift and morphological correlates for Diplodus capensis (Teleostei Sparidae) in southern Angola
- Richardson, Timothy J, Potts, Warren M, Santos, Carmen V, Sauer, Warwick H H
- Authors: Richardson, Timothy J , Potts, Warren M , Santos, Carmen V , Sauer, Warwick H H
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/443984 , vital:74176 , https://doi.org/10.1080/15627020.2011.11407501
- Description: Allometric growth patterns of functional morphological variables that reflect resource use in fish were correlated with the diet of Diplodus capensis in southern Angola. A total of 114 individuals (76–336 mm FL) were collected for stomach content analysis and a further 35 individuals (80–320 mm FL) for morphometric analysis. The major dietary components belonged to the groups Chlorophyta, Cirripedia, Rhodophyta and Bivalvia, and made up 71.7% of the diet in terms of a computed ranking index. There was a clear ontogenetic dietary shift with small fish feeding predominantly on algae and large fish on barnacles and mussels. This increasingly durophagous diet corresponded with a positive allometric growth pattern in the gape dimensions (width, height and surface area), adductor mandibulae muscle process and incisor width. Conversely, the relative gut length followed an isometric growth pattern, suggesting a decreased absorptive capacity. This isometric growth pattern is attributed to the better digestibility of the durophagous prey items when compared with algae and further corroborates a link between the morphology and an ontogenetic dietary shift observed in this species.
- Full Text:
- Date Issued: 2011
- Authors: Richardson, Timothy J , Potts, Warren M , Santos, Carmen V , Sauer, Warwick H H
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/443984 , vital:74176 , https://doi.org/10.1080/15627020.2011.11407501
- Description: Allometric growth patterns of functional morphological variables that reflect resource use in fish were correlated with the diet of Diplodus capensis in southern Angola. A total of 114 individuals (76–336 mm FL) were collected for stomach content analysis and a further 35 individuals (80–320 mm FL) for morphometric analysis. The major dietary components belonged to the groups Chlorophyta, Cirripedia, Rhodophyta and Bivalvia, and made up 71.7% of the diet in terms of a computed ranking index. There was a clear ontogenetic dietary shift with small fish feeding predominantly on algae and large fish on barnacles and mussels. This increasingly durophagous diet corresponded with a positive allometric growth pattern in the gape dimensions (width, height and surface area), adductor mandibulae muscle process and incisor width. Conversely, the relative gut length followed an isometric growth pattern, suggesting a decreased absorptive capacity. This isometric growth pattern is attributed to the better digestibility of the durophagous prey items when compared with algae and further corroborates a link between the morphology and an ontogenetic dietary shift observed in this species.
- Full Text:
- Date Issued: 2011
Optical limiting behavior of ring substituted zinc, indium and gallium phthalocyanines in the presence of quantum dots
- Britton, Jonathan, Litwinski, Christian, Durmus, Mahmut, Chauke, Vongani, Nyokong, Tebello
- Authors: Britton, Jonathan , Litwinski, Christian , Durmus, Mahmut , Chauke, Vongani , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247122 , vital:51548 , xlink:href="https://doi.org/10.1142/S1088424611004142"
- Description: This paper presents the study of the effects of CdTe-TGA quantum dots (QDs) on optical limiting ability of different phthalocyanine (Pc) complexes (1–10) containing Zn, Ga, In central metals and substituted with benzyloxyphenoxy, phenoxy, tert-butylphenoxy and amino groups. The optical limiting parameters of Pcs were higher for tert-butylphenoxy when compared to benzyloxyphenoxy and phenoxy substituents, in DMSO. Non-peripheral substitution decreased the optical limiting parameters. Third-order susceptibility (Im[χ(3)]/α) values of Pcs in the absence and presence of CdTe QDs were in the 10-12 to 10-10 esu.cm range. Hyperpolarizabilities (γ) ranged from 10-31 to 10-29 esu L for Pc alone or in mixture with QDs. There is a general improvement in optical limiting ability of Pc complexes in the presence of CdTe TGA QDs. Due to these promising results, future work can be implemented for the creation of Pc:QD thin films, which would then be examined to ensure that their optical limiting ability is still acceptable.
- Full Text:
- Date Issued: 2011
- Authors: Britton, Jonathan , Litwinski, Christian , Durmus, Mahmut , Chauke, Vongani , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247122 , vital:51548 , xlink:href="https://doi.org/10.1142/S1088424611004142"
- Description: This paper presents the study of the effects of CdTe-TGA quantum dots (QDs) on optical limiting ability of different phthalocyanine (Pc) complexes (1–10) containing Zn, Ga, In central metals and substituted with benzyloxyphenoxy, phenoxy, tert-butylphenoxy and amino groups. The optical limiting parameters of Pcs were higher for tert-butylphenoxy when compared to benzyloxyphenoxy and phenoxy substituents, in DMSO. Non-peripheral substitution decreased the optical limiting parameters. Third-order susceptibility (Im[χ(3)]/α) values of Pcs in the absence and presence of CdTe QDs were in the 10-12 to 10-10 esu.cm range. Hyperpolarizabilities (γ) ranged from 10-31 to 10-29 esu L for Pc alone or in mixture with QDs. There is a general improvement in optical limiting ability of Pc complexes in the presence of CdTe TGA QDs. Due to these promising results, future work can be implemented for the creation of Pc:QD thin films, which would then be examined to ensure that their optical limiting ability is still acceptable.
- Full Text:
- Date Issued: 2011
Optimal template removal from molecularly imprinted polymers by pressurized hot water extraction
- Batlokwa, Bareki Shima, Mokgadi, Janes, Nyokong, Tebello, Torto, Nelson
- Authors: Batlokwa, Bareki Shima , Mokgadi, Janes , Nyokong, Tebello , Torto, Nelson
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247813 , vital:51620 , xlink:href="https://doi.org/10.1007/s10337-010-1884-3"
- Description: An optimal extraction method for the removal of templates from molecularly imprinted polymers (MIPs) is presented. The extraction method is based on pressurized hot water extraction (PHWE). PHWE was evaluated by application to three distinctly colored MIPs for chlorophyll (green), quercetin (yellow) and phthalocynine (dark blue) with subsequent monitoring of template removal and template bleeding by an ultraviolet spectrophotometer. The templates were washed-off and the extraction efficiency (EE) was compared to that of soxhlet and ultrasonic extraction methods. PHWE employed hot water at an optimal temperature of 220 °C, pressure of 50 bars and flow rate of 2 mL min−1 to thoroughly wash-off the respective templates from their MIPs. The EE evaluated for PHWE was over 99.6% for all the MIPs with no subsequent or minimal template bleeding (more than 0.01%). The washing procedure was simple and relatively fast as it was achieved in 70 min at the most. At 95% confidence level (n = 3), soxhlet and ultrasonic recorded EE that was not significantly different (more than 94.5% in all cases) from that of PHWE (less than 99.6% in all cases). Soxhlet and ultrasonic had washing procedures that were slower (over 18 h) and employed large quantities (400 mL) of organic solvents modified with acids. The percentage relative standard deviations (%RSD) for the EE and recovery results were less than 2.3% in all cases indicating the high reproducibility of the method. Overall, the three methods performed comparably in extracting templates. PHWE seems to be the method of choice as it employed water which poses no environmental threat.
- Full Text:
- Date Issued: 2011
- Authors: Batlokwa, Bareki Shima , Mokgadi, Janes , Nyokong, Tebello , Torto, Nelson
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247813 , vital:51620 , xlink:href="https://doi.org/10.1007/s10337-010-1884-3"
- Description: An optimal extraction method for the removal of templates from molecularly imprinted polymers (MIPs) is presented. The extraction method is based on pressurized hot water extraction (PHWE). PHWE was evaluated by application to three distinctly colored MIPs for chlorophyll (green), quercetin (yellow) and phthalocynine (dark blue) with subsequent monitoring of template removal and template bleeding by an ultraviolet spectrophotometer. The templates were washed-off and the extraction efficiency (EE) was compared to that of soxhlet and ultrasonic extraction methods. PHWE employed hot water at an optimal temperature of 220 °C, pressure of 50 bars and flow rate of 2 mL min−1 to thoroughly wash-off the respective templates from their MIPs. The EE evaluated for PHWE was over 99.6% for all the MIPs with no subsequent or minimal template bleeding (more than 0.01%). The washing procedure was simple and relatively fast as it was achieved in 70 min at the most. At 95% confidence level (n = 3), soxhlet and ultrasonic recorded EE that was not significantly different (more than 94.5% in all cases) from that of PHWE (less than 99.6% in all cases). Soxhlet and ultrasonic had washing procedures that were slower (over 18 h) and employed large quantities (400 mL) of organic solvents modified with acids. The percentage relative standard deviations (%RSD) for the EE and recovery results were less than 2.3% in all cases indicating the high reproducibility of the method. Overall, the three methods performed comparably in extracting templates. PHWE seems to be the method of choice as it employed water which poses no environmental threat.
- Full Text:
- Date Issued: 2011
Optimizing the electrocatalytic activity of surface confined Co macrocyclics for the electrooxidation of thiocyanate at pH 4
- Tshangana, Charmaine, Pavez, Jorge, Gulppi, Miguel A, De Mattos, Ivanildo Luiz, Arratia-Perez, Ramiro, Linares-Flores, Cristian, Paez, Maritza, Nyokong, Tebello, Zagal, Jos H
- Authors: Tshangana, Charmaine , Pavez, Jorge , Gulppi, Miguel A , De Mattos, Ivanildo Luiz , Arratia-Perez, Ramiro , Linares-Flores, Cristian , Paez, Maritza , Nyokong, Tebello , Zagal, Jos H
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247726 , vital:51612 , xlink:href="https://doi.org/10.1002/elan.201000599"
- Description: We have studied the trends in catalytic activity of several Co macrocyclics confined on the surface graphite electrodes for the oxidation of thiocyanate. A plot of log i (at constant E) versus the formal potential of the catalyst gives a volcano correlation, indicating that the Co(II/I) redox potential needs to be tuned, in order to achieve maximum reactivity. Graphite electrodes modified with Co phthalocyanine at pH 4 exhibit linear amperometric response for thiocyanate concentration in the range 10−7 and 10−3 M. Theoretical calculations show that electrocatalytic activity (as log i at constant E) plotted versus the energy of the LUMO of the Co complex also gives a volcano correlation.
- Full Text:
- Date Issued: 2011
- Authors: Tshangana, Charmaine , Pavez, Jorge , Gulppi, Miguel A , De Mattos, Ivanildo Luiz , Arratia-Perez, Ramiro , Linares-Flores, Cristian , Paez, Maritza , Nyokong, Tebello , Zagal, Jos H
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247726 , vital:51612 , xlink:href="https://doi.org/10.1002/elan.201000599"
- Description: We have studied the trends in catalytic activity of several Co macrocyclics confined on the surface graphite electrodes for the oxidation of thiocyanate. A plot of log i (at constant E) versus the formal potential of the catalyst gives a volcano correlation, indicating that the Co(II/I) redox potential needs to be tuned, in order to achieve maximum reactivity. Graphite electrodes modified with Co phthalocyanine at pH 4 exhibit linear amperometric response for thiocyanate concentration in the range 10−7 and 10−3 M. Theoretical calculations show that electrocatalytic activity (as log i at constant E) plotted versus the energy of the LUMO of the Co complex also gives a volcano correlation.
- Full Text:
- Date Issued: 2011
Photocatalytic behaviour of tantalum (V) phthalocyanines in the presence of gold nanoparticles towards the oxidation of cyclohexene
- Chauke, Vongani P, Antunes, Edith M, Chidawanyika, Wadzanai J U, Nyokong, Tebello
- Authors: Chauke, Vongani P , Antunes, Edith M , Chidawanyika, Wadzanai J U , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247904 , vital:51628 , xlink:href="https://doi.org/10.1016/j.molcata.2010.11.023"
- Description: This paper presents the photocatalytic oxidation of cyclohexene using (OH)3TaPc derivatives in the absence or presence of gold nanoparticles (AuNPs). The photochemical parameters that include photodegradation (ΦP) and singlet oxygen (ΦΔ) quantum yields are also reported in this work. The ΦΔ values were 0.47 and 0.36 for complexes 1a and 1b, respectively. The ΦΔ values improved drastically in the presence of AuNPs to 0.75 and 0.88, respectively. The ΦP values ranged from 1.02 to 2.45 × 10−6, showing stability of TaPc derivatives in the absence and presence of AuNPs. The photocatalytic products identified using gas chromatograph (GC) are cyclohexene oxide, 2-cyclohexen-1-ol, 2-cyclohexene-1-one and 1,2-cyclohexanediol. The percentage conversion values were higher in the presence of AuNPs. Singlet oxygen was determined to be the main agent involved in the photocatalytic oxidation of cyclohexene. The product yield percentage values for both TaPc complexes (1a and 1b) and TaPc in the presence of AuNPs ranged from 6.3 to 21.2%.
- Full Text:
- Date Issued: 2011
- Authors: Chauke, Vongani P , Antunes, Edith M , Chidawanyika, Wadzanai J U , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247904 , vital:51628 , xlink:href="https://doi.org/10.1016/j.molcata.2010.11.023"
- Description: This paper presents the photocatalytic oxidation of cyclohexene using (OH)3TaPc derivatives in the absence or presence of gold nanoparticles (AuNPs). The photochemical parameters that include photodegradation (ΦP) and singlet oxygen (ΦΔ) quantum yields are also reported in this work. The ΦΔ values were 0.47 and 0.36 for complexes 1a and 1b, respectively. The ΦΔ values improved drastically in the presence of AuNPs to 0.75 and 0.88, respectively. The ΦP values ranged from 1.02 to 2.45 × 10−6, showing stability of TaPc derivatives in the absence and presence of AuNPs. The photocatalytic products identified using gas chromatograph (GC) are cyclohexene oxide, 2-cyclohexen-1-ol, 2-cyclohexene-1-one and 1,2-cyclohexanediol. The percentage conversion values were higher in the presence of AuNPs. Singlet oxygen was determined to be the main agent involved in the photocatalytic oxidation of cyclohexene. The product yield percentage values for both TaPc complexes (1a and 1b) and TaPc in the presence of AuNPs ranged from 6.3 to 21.2%.
- Full Text:
- Date Issued: 2011
Photocatalytic transformation of chlorophenols under homogeneous and heterogeneous conditions using palladium octadodecylthio phthalocyanine
- Ogunbayo, Taofeek B, Nyokong, Tebello
- Authors: Ogunbayo, Taofeek B , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246816 , vital:51516 , xlink:href="https://doi.org/10.1016/j.molcata.2011.09.003"
- Description: Homogeneous and heterogeneous photosensitized transformations of 4-chlorophenol (4-CP) and pentachlorophenol (PCP) using palladium octadodecylthiophthalocyanine (PdODPc) were investigated. Under heterogeneous conditions, the photosensitizer was supported on functionalized single walled carbon nanotubes (SWCNTs). Homogeneous photosensitization proved to be more effective than the heterogeneous reaction in terms of percentage of transformation achieved. The kinetics of heterogeneous catalysis proved that ads-PdODPc–SWCNT–COOH (where SWCNT has been functionalized with COOH groups) was reusable for 4-CP while its activity degenerated when reused for PCP. Singlet oxygen was confirmed as playing an active role in the reactions.
- Full Text:
- Date Issued: 2011
- Authors: Ogunbayo, Taofeek B , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246816 , vital:51516 , xlink:href="https://doi.org/10.1016/j.molcata.2011.09.003"
- Description: Homogeneous and heterogeneous photosensitized transformations of 4-chlorophenol (4-CP) and pentachlorophenol (PCP) using palladium octadodecylthiophthalocyanine (PdODPc) were investigated. Under heterogeneous conditions, the photosensitizer was supported on functionalized single walled carbon nanotubes (SWCNTs). Homogeneous photosensitization proved to be more effective than the heterogeneous reaction in terms of percentage of transformation achieved. The kinetics of heterogeneous catalysis proved that ads-PdODPc–SWCNT–COOH (where SWCNT has been functionalized with COOH groups) was reusable for 4-CP while its activity degenerated when reused for PCP. Singlet oxygen was confirmed as playing an active role in the reactions.
- Full Text:
- Date Issued: 2011
Photophysical and photochemical behavior of electrospun fibers of a polyurethane polymer chemically linked to lutetium carboxyphenoxy phthalocyanine
- Zugle, Ruphino, Litwinski, Christian, Torto, Nelson, Nyokong, Tebello
- Authors: Zugle, Ruphino , Litwinski, Christian , Torto, Nelson , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/248428 , vital:51685 , xlink:href="https://doi.org/10.1039/C1NJ20126C"
- Description: A phthalocyanine complex of lutetium substituted with four peripherally substituted 4-carboxyphenoxy groups was synthesized using cyclotetramerisation reaction. Its structure was elucidated using conventional spectroscopic methods and elemental analysis. The spectral behavior of the complex was studied in DMF solution and in a solid polyurethane fiber matrix. The UV-Visible spectrum showed a red shift in its Q-band maximum absorption within the fiber as compared to that in solution. The triplet quantum yield in DMF was determined to be 0.51 with a lifetime of 2.7 μs and a singlet oxygen quantum yield of 0.33 with a lifetime of 19.85 μs in the same solvent. The functionalized phthalocyanine fiber could be a promising fabric material for applications such as self-disinfecting in wound dressing. A method based on the conversion of ADMA was used to estimate the singlet oxygen quantum yield of the Pc in the hybrid fiber. An estimated singlet oxygen quantum yield value of 0.11 in aqueous medium was obtained. The fluorescence quantum yield of the Pc was found to be 0.01 with a lifetime of 3.20 ns in DMF.
- Full Text:
- Date Issued: 2011
- Authors: Zugle, Ruphino , Litwinski, Christian , Torto, Nelson , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/248428 , vital:51685 , xlink:href="https://doi.org/10.1039/C1NJ20126C"
- Description: A phthalocyanine complex of lutetium substituted with four peripherally substituted 4-carboxyphenoxy groups was synthesized using cyclotetramerisation reaction. Its structure was elucidated using conventional spectroscopic methods and elemental analysis. The spectral behavior of the complex was studied in DMF solution and in a solid polyurethane fiber matrix. The UV-Visible spectrum showed a red shift in its Q-band maximum absorption within the fiber as compared to that in solution. The triplet quantum yield in DMF was determined to be 0.51 with a lifetime of 2.7 μs and a singlet oxygen quantum yield of 0.33 with a lifetime of 19.85 μs in the same solvent. The functionalized phthalocyanine fiber could be a promising fabric material for applications such as self-disinfecting in wound dressing. A method based on the conversion of ADMA was used to estimate the singlet oxygen quantum yield of the Pc in the hybrid fiber. An estimated singlet oxygen quantum yield value of 0.11 in aqueous medium was obtained. The fluorescence quantum yield of the Pc was found to be 0.01 with a lifetime of 3.20 ns in DMF.
- Full Text:
- Date Issued: 2011
Photophysical behavior of zinc monoaminophthalocyanines linked to mercaptopropionic acid-capped CdTe quantum dots
- D'Souza, Sarah, Antunes, Edith M, Litwinski, Christian, Nyokong, Tebello
- Authors: D'Souza, Sarah , Antunes, Edith M , Litwinski, Christian , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247634 , vital:51602 , xlink:href="https://doi.org/10.1016/j.jphotochem.2011.03.005"
- Description: Photosensitizing properties of zinc monoaminophthalocyanine (2) {in the absence or presence of mercaptopropionic acid (MPA) capped CdTe quantum dots (QDs)} were compared with those of mono-aminophenoxy zinc phthalocyanine (3), zinc tetrasulfonated phthalocyanine and zinc phthalocyanine. Complexes 2 and 3 were also linked to the MPA capped CdTe quantum dots through the formation of an amide bond. High triplet state quantum yields were obtained for the linked QD–phthalocyanine derivatives (complexes 2 and 3) compared to when complexes 2 and 3 were mixed with MPA QDs without a chemical bond.
- Full Text:
- Date Issued: 2011
- Authors: D'Souza, Sarah , Antunes, Edith M , Litwinski, Christian , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247634 , vital:51602 , xlink:href="https://doi.org/10.1016/j.jphotochem.2011.03.005"
- Description: Photosensitizing properties of zinc monoaminophthalocyanine (2) {in the absence or presence of mercaptopropionic acid (MPA) capped CdTe quantum dots (QDs)} were compared with those of mono-aminophenoxy zinc phthalocyanine (3), zinc tetrasulfonated phthalocyanine and zinc phthalocyanine. Complexes 2 and 3 were also linked to the MPA capped CdTe quantum dots through the formation of an amide bond. High triplet state quantum yields were obtained for the linked QD–phthalocyanine derivatives (complexes 2 and 3) compared to when complexes 2 and 3 were mixed with MPA QDs without a chemical bond.
- Full Text:
- Date Issued: 2011
Photophysical behaviour of asymmetrically substituted metal free, Mg and Zn phthalocyanines in the presence of folic acid
- Nombona, Nolwazi, Chidawanyika, Wadzanai J U, Nyokong, Tebello
- Authors: Nombona, Nolwazi , Chidawanyika, Wadzanai J U , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247705 , vital:51608 , xlink:href="https://doi.org/10.1016/j.poly.2010.11.033"
- Description: This work reports on the synthesis, characterisation and photophysical properties of new asymmetric metal free, magnesium and zinc phthalocyanines containing a mono carboxylic acid group for possible linking to biological molecules via an amide bond. Successful synthesis of the phthalocyanines was achieved through the statistical condensation method. The phthalocyanines were mixed with folic acid and their photophysical properties were examined. The triplet quantum yield values for all the complexes in DMSO were between 0.49 and 0.74 and in the presence of folic acid they were between 0.37 and 0.63. The lifetimes were generally good ranging from 70 to 290 μs in the absence or presence of folic acid.
- Full Text:
- Date Issued: 2011
- Authors: Nombona, Nolwazi , Chidawanyika, Wadzanai J U , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247705 , vital:51608 , xlink:href="https://doi.org/10.1016/j.poly.2010.11.033"
- Description: This work reports on the synthesis, characterisation and photophysical properties of new asymmetric metal free, magnesium and zinc phthalocyanines containing a mono carboxylic acid group for possible linking to biological molecules via an amide bond. Successful synthesis of the phthalocyanines was achieved through the statistical condensation method. The phthalocyanines were mixed with folic acid and their photophysical properties were examined. The triplet quantum yield values for all the complexes in DMSO were between 0.49 and 0.74 and in the presence of folic acid they were between 0.37 and 0.63. The lifetimes were generally good ranging from 70 to 290 μs in the absence or presence of folic acid.
- Full Text:
- Date Issued: 2011
Photophysical characterization of dysprosium, erbium and lutetium phthalocyanines tetrasubstituted with phenoxy groups at non-peripheral positions
- Zugle, Ruphino, Litwinski, Christian, Nyokong, Tebello
- Authors: Zugle, Ruphino , Litwinski, Christian , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247561 , vital:51595 , xlink:href="https://doi.org/10.1016/j.poly.2011.03.030"
- Description: Dysprosium bis-phthalocyanine and monomeric phthalocyanines of erbium and lutetium with non-peripheral phenoxy substituents have been synthesized using two different preparative routes. Photophysical studies on these phthalocyanines revealed that the triplet states of dysprosium and erbium are not populated while the monomeric phthalocyanine complex of lutetium is populated with a quantum yield of 0.83 and a lifetime of 25 μs in DMSO. It was further found that the phthalocyanine complex of lutetium was capable of photochemical generation of singlet state molecular oxygen with yield of 0.71 in THF, thus a promising photosensitizer. However, the three phthalocyanine molecules have very low fluorescence quantum yields of less than 0.01.
- Full Text:
- Date Issued: 2011
- Authors: Zugle, Ruphino , Litwinski, Christian , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247561 , vital:51595 , xlink:href="https://doi.org/10.1016/j.poly.2011.03.030"
- Description: Dysprosium bis-phthalocyanine and monomeric phthalocyanines of erbium and lutetium with non-peripheral phenoxy substituents have been synthesized using two different preparative routes. Photophysical studies on these phthalocyanines revealed that the triplet states of dysprosium and erbium are not populated while the monomeric phthalocyanine complex of lutetium is populated with a quantum yield of 0.83 and a lifetime of 25 μs in DMSO. It was further found that the phthalocyanine complex of lutetium was capable of photochemical generation of singlet state molecular oxygen with yield of 0.71 in THF, thus a promising photosensitizer. However, the three phthalocyanine molecules have very low fluorescence quantum yields of less than 0.01.
- Full Text:
- Date Issued: 2011
Phototransformation of 4-nitrophenol using Pd phthalocyanines supported on single walled carbon nanotubes
- Ogunbayo, Taofeek B, Nyokong, Tebello
- Authors: Ogunbayo, Taofeek B , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247800 , vital:51619 , xlink:href="https://doi.org/10.1016/j.molcata.2011.01.016"
- Description: Adsorption of palladium phthalocyanines complexes on single walled carbon nanotubes was carried out. The resulting composites were employed as catalysts for heterogeneous photocatalytic oxidation of 4-nitrophenol (4-NP) in aqueous media. Singlet oxygen was found to be involved in the phototransformation of 4-NP. Gas chromatographic separation gave hydroquinone and benzoquinone as the phototransformation products. Langmuir–Hinshelwood (L–H) model was employed to evaluate the adsorption and desorption equilibria of the reactants and the products. 2,3,9,10,16,17,23,24-octakis(dodecylthiophthalocyaninato) palladium(II) and 1,4,8,11,15,18,22,25-octakis(dodecylthio phthalocyaninato) palladium, containing the longest alkyl chain gave the best performances.
- Full Text:
- Date Issued: 2011
- Authors: Ogunbayo, Taofeek B , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247800 , vital:51619 , xlink:href="https://doi.org/10.1016/j.molcata.2011.01.016"
- Description: Adsorption of palladium phthalocyanines complexes on single walled carbon nanotubes was carried out. The resulting composites were employed as catalysts for heterogeneous photocatalytic oxidation of 4-nitrophenol (4-NP) in aqueous media. Singlet oxygen was found to be involved in the phototransformation of 4-NP. Gas chromatographic separation gave hydroquinone and benzoquinone as the phototransformation products. Langmuir–Hinshelwood (L–H) model was employed to evaluate the adsorption and desorption equilibria of the reactants and the products. 2,3,9,10,16,17,23,24-octakis(dodecylthiophthalocyaninato) palladium(II) and 1,4,8,11,15,18,22,25-octakis(dodecylthio phthalocyaninato) palladium, containing the longest alkyl chain gave the best performances.
- Full Text:
- Date Issued: 2011
Porphyrin nanorods modified glassy carbon electrode for the electrocatalysis of dioxygen, methanol and hydrazine
- George, Reama C, Mugadza, Tawanda, Khene, Samson, Egharevba, Gabriel O, Nyokong, Tebello
- Authors: George, Reama C , Mugadza, Tawanda , Khene, Samson , Egharevba, Gabriel O , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247388 , vital:51576 , xlink:href="https://doi.org/10.1002/elan.201100081"
- Description: Porphyrin nanorods (PNR) were prepared by ionic self-assembly of two oppositely charged porphyrin molecules consisting of free base meso-tetraphenylsulfonate porphyrin (H4TPPS42−) and meso-tetra(N-methyl-4-pyridyl) porphyrin (MTMePyP4+M=Sn, Mn, In, Co). These consist of H4TPPS42−SnTMePyP4+, H4TPPS42−CoTMePyP4+, H4TPPS42−InTMePyP4+ and H4TPPS42−MnTMePyP4+ porphyrin nanorods. The absorption spectra and transmission electron microscopic (TEM) images of these structures were obtained. These porphyrin nanostructures were used to modify a glassy carbon electrode for the electrocatalytic reduction of oxygen, and the oxidation of hydrazine and methanol at low pH. The cyclic voltammogram of PNR-modified GCE in pH 2 buffer solution has five irreversible processes, two distinct reduction processes and three oxidation processes. The porphyrin nanorods modified GCE produce good responses especially towards oxygen reduction at −0.50 V vs. Ag|AgCl (3 M KCl). The process of electrocatalytic oxidation of methanol using PNR-modified GCE begins at 0.71 V vs. Ag|AgCl (3 M KCl). The electrochemical oxidation of hydrazine began at around 0.36 V on H4TPPS42−SnTMePyP4+ modified GCE. The GCE modified with H4TPPS42−CoTMePyP4+ H4TPPS42−InTMePyP4+ and H4TPPS42−MnTMePyP4+ porphyrin nanorods began oxidizing hydrazine at 0.54 V, 0.59 V and 0.56 V, respectively.
- Full Text:
- Date Issued: 2011
- Authors: George, Reama C , Mugadza, Tawanda , Khene, Samson , Egharevba, Gabriel O , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247388 , vital:51576 , xlink:href="https://doi.org/10.1002/elan.201100081"
- Description: Porphyrin nanorods (PNR) were prepared by ionic self-assembly of two oppositely charged porphyrin molecules consisting of free base meso-tetraphenylsulfonate porphyrin (H4TPPS42−) and meso-tetra(N-methyl-4-pyridyl) porphyrin (MTMePyP4+M=Sn, Mn, In, Co). These consist of H4TPPS42−SnTMePyP4+, H4TPPS42−CoTMePyP4+, H4TPPS42−InTMePyP4+ and H4TPPS42−MnTMePyP4+ porphyrin nanorods. The absorption spectra and transmission electron microscopic (TEM) images of these structures were obtained. These porphyrin nanostructures were used to modify a glassy carbon electrode for the electrocatalytic reduction of oxygen, and the oxidation of hydrazine and methanol at low pH. The cyclic voltammogram of PNR-modified GCE in pH 2 buffer solution has five irreversible processes, two distinct reduction processes and three oxidation processes. The porphyrin nanorods modified GCE produce good responses especially towards oxygen reduction at −0.50 V vs. Ag|AgCl (3 M KCl). The process of electrocatalytic oxidation of methanol using PNR-modified GCE begins at 0.71 V vs. Ag|AgCl (3 M KCl). The electrochemical oxidation of hydrazine began at around 0.36 V on H4TPPS42−SnTMePyP4+ modified GCE. The GCE modified with H4TPPS42−CoTMePyP4+ H4TPPS42−InTMePyP4+ and H4TPPS42−MnTMePyP4+ porphyrin nanorods began oxidizing hydrazine at 0.54 V, 0.59 V and 0.56 V, respectively.
- Full Text:
- Date Issued: 2011
Redox activity of CdTe quantum dots linked to nickel tetraaminophthalocyanine
- Khene, Samson, Nyokong, Tebello
- Authors: Khene, Samson , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246457 , vital:51478 , xlink:href="https://doi.org/10.1016/j.microc.2011.06.024"
- Description: Cadmium tellurite quantum dots (CdTe-QDs) are linked to nickel tetraamino phthalocyanine (CdTe-QDs-NiTAPc) through an amide bond. Differential pulse voltammetry shows that that NiTAPc stabilizes the QDs against oxidative disintegration into metallic products on oxidation. Electrocatalytic oxidation of 2, 4-dichlorophenol (DCP) and pentachlorophenol (PCP) on CdTe-QDs and CdTe-QDs-NiTAPc adsorbed or electrodeposited onto a gold electrode were studied. Adsorbed CdTe-QDs-NiTAPc shows the lowest potential for DCP and PCP oxidation and it is also more stable to fouling by PCP and its oxidation products compared to adsorbed CdTe-QDs without NiTAPc. Electrodeposited CdTe-QDs or CdTe-QDs-NiTAPc show the best activity in terms of enhanced currents towards the oxidation of the chlorophenols.
- Full Text:
- Date Issued: 2011
- Authors: Khene, Samson , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246457 , vital:51478 , xlink:href="https://doi.org/10.1016/j.microc.2011.06.024"
- Description: Cadmium tellurite quantum dots (CdTe-QDs) are linked to nickel tetraamino phthalocyanine (CdTe-QDs-NiTAPc) through an amide bond. Differential pulse voltammetry shows that that NiTAPc stabilizes the QDs against oxidative disintegration into metallic products on oxidation. Electrocatalytic oxidation of 2, 4-dichlorophenol (DCP) and pentachlorophenol (PCP) on CdTe-QDs and CdTe-QDs-NiTAPc adsorbed or electrodeposited onto a gold electrode were studied. Adsorbed CdTe-QDs-NiTAPc shows the lowest potential for DCP and PCP oxidation and it is also more stable to fouling by PCP and its oxidation products compared to adsorbed CdTe-QDs without NiTAPc. Electrodeposited CdTe-QDs or CdTe-QDs-NiTAPc show the best activity in terms of enhanced currents towards the oxidation of the chlorophenols.
- Full Text:
- Date Issued: 2011
Selection and characterization of suitable lipid excipients for use in the manufacture of didanosine-loaded solid lipid nanoparticles and nanostructured lipid carriers
- Kasongo, Kasongo W, Pardeike, Jana, Muller, Rainer H, Walker, Roderick B
- Authors: Kasongo, Kasongo W , Pardeike, Jana , Muller, Rainer H , Walker, Roderick B
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184016 , vital:44156 , xlink:href="https://doi.org/10.1002/jps.22711"
- Description: This research aimed to evaluate the suitability of lipids for the manufacture of solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) loaded with the hydrophilic drug, didanosine (DDI). The crystalline state and polymorphism of lipids with the best‐solubulizing potential for DDI was investigated using differential scanning calorimetry (DSC) and wide‐angle X‐ray scattering (WAXS). DSC and WAXS were also used to determine potential interactions between the bulk lipids and DDI. Precirol® ATO 5 and Transcutol® HP showed the best‐solubilizing potential for DDI. Precirol® ATO 5 exists in the β‐modification before heating; however, a mixture of both α‐ and β‐modifications were detected following heating. Addition of Transcutol® HP to Precirol® ATO 5 changes the polymorphism of the latter from the β‐modification to a form that exhibits coexistence of the α‐ and β‐modifications. DDI exists in a crystalline state when dispersed at 5% (w/w) in Precirol® ATO 5 or in a Precirol® ATO 5/Transcutol® HP mixture. DSC and WAXS profiles of DDI/bulk lipids mixture obtained before and after exposure to heat revealed no interactions between DDI and the lipids. Precirol® ATO 5 and a mixture of Precirol® ATO 5 and Transcutol® HP may be used to manufacture DDI‐loaded SLN and NLC, respectively.
- Full Text:
- Date Issued: 2011
- Authors: Kasongo, Kasongo W , Pardeike, Jana , Muller, Rainer H , Walker, Roderick B
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184016 , vital:44156 , xlink:href="https://doi.org/10.1002/jps.22711"
- Description: This research aimed to evaluate the suitability of lipids for the manufacture of solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) loaded with the hydrophilic drug, didanosine (DDI). The crystalline state and polymorphism of lipids with the best‐solubulizing potential for DDI was investigated using differential scanning calorimetry (DSC) and wide‐angle X‐ray scattering (WAXS). DSC and WAXS were also used to determine potential interactions between the bulk lipids and DDI. Precirol® ATO 5 and Transcutol® HP showed the best‐solubilizing potential for DDI. Precirol® ATO 5 exists in the β‐modification before heating; however, a mixture of both α‐ and β‐modifications were detected following heating. Addition of Transcutol® HP to Precirol® ATO 5 changes the polymorphism of the latter from the β‐modification to a form that exhibits coexistence of the α‐ and β‐modifications. DDI exists in a crystalline state when dispersed at 5% (w/w) in Precirol® ATO 5 or in a Precirol® ATO 5/Transcutol® HP mixture. DSC and WAXS profiles of DDI/bulk lipids mixture obtained before and after exposure to heat revealed no interactions between DDI and the lipids. Precirol® ATO 5 and a mixture of Precirol® ATO 5 and Transcutol® HP may be used to manufacture DDI‐loaded SLN and NLC, respectively.
- Full Text:
- Date Issued: 2011
Selective adsorption of PVP on the surface of silver nanoparticles
- Mdluli, Phumlani S, Sosibo, Ndabenhle M, Mashazi, Philani N, Nyokong, Tebello, Tshikhudo, Robert T, Skepu, Amanda, van der Lingen, Elma
- Authors: Mdluli, Phumlani S , Sosibo, Ndabenhle M , Mashazi, Philani N , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , van der Lingen, Elma
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247143 , vital:51550 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.07.049"
- Description: The use of surfactants to affect the shape evolution of silver nanoparticles is explored. This allows one to fine-tune the morphological evolution and the optical properties of the metal nanoparticles. Polyvinyl pyrrolidone (PVP) has been used as a surfactant to control the growth of silver nanoparticles at room temperature. In this paper, molecular dynamics simulations were performed to understand regio-selective adsorption of PVP that leads to the preferential growth of silver nanoparticles in dimethylformamide (DMF). The interaction energies between PVP and Ag(1 1 0), Ag(1 0 0) and Ag(1 1 1) crystal planes were calculated and in addition the length density profile of the surfactant on silver surfaces was also examined. Importantly, it has been demonstrated that the length distribution profiles analysis obtained from the molecular dynamics study fully explained the adsorption of PVP on the surface of silver nanoparticles through the carbonyl group of the PVP ring. The application of molecular dynamics simulation technique is important in understanding the evolution of silver nanoparticles and is vital in choosing the right surfactants.
- Full Text:
- Date Issued: 2011
- Authors: Mdluli, Phumlani S , Sosibo, Ndabenhle M , Mashazi, Philani N , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , van der Lingen, Elma
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247143 , vital:51550 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.07.049"
- Description: The use of surfactants to affect the shape evolution of silver nanoparticles is explored. This allows one to fine-tune the morphological evolution and the optical properties of the metal nanoparticles. Polyvinyl pyrrolidone (PVP) has been used as a surfactant to control the growth of silver nanoparticles at room temperature. In this paper, molecular dynamics simulations were performed to understand regio-selective adsorption of PVP that leads to the preferential growth of silver nanoparticles in dimethylformamide (DMF). The interaction energies between PVP and Ag(1 1 0), Ag(1 0 0) and Ag(1 1 1) crystal planes were calculated and in addition the length density profile of the surfactant on silver surfaces was also examined. Importantly, it has been demonstrated that the length distribution profiles analysis obtained from the molecular dynamics study fully explained the adsorption of PVP on the surface of silver nanoparticles through the carbonyl group of the PVP ring. The application of molecular dynamics simulation technique is important in understanding the evolution of silver nanoparticles and is vital in choosing the right surfactants.
- Full Text:
- Date Issued: 2011
Simulating Collective agency: Joint purpose, presence and power as Constraints to learning in a social Context
- Authors: Kulundu, Injairu
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/386530 , vital:68149 , xlink:href="https://www.ajol.info/index.php/sajee/article/view/122249"
- Description: This paper reflects on the practice of social learning by using my experiences as a social development practitioner in two projects. The first, the Arkwork Collective, is an art-junk process that engages marginalised youth in Grahamstown, South Africa in a process that uses creative sculpture and drama to explore personal and social issues that exist in their immediate context. The second, Jonga Phambili Sinethemba looks into the impact of climate change and HIV/AIDS (amongst other issues) in the rural and peri-urban communities of Willowvale and Lesseyton in the Eastern Cape, South Africa. It seeks to provide a platform where members of each community can define the vulnerabilities, capabilities, social networks in their areas with the aim of bolstering the adaptive capacity of these communities. Snippets of my experiences in these projects are shared with the intention of demonstrating constraints to learning in a social context. Key ideas that the paper explores include honouring the lived experiences of participants as part of the process, prioritising the participation of each individual present as part of the ongoing conversation, the challenge of surfacing the vital independent links of a collective, drawing on the reflective capacity of a diverse group, assessing the quality of participation, building capabilities for ‘response-ability’ and rethinking facilitation. Each section sets out challenges and questions for practitioners in this field to reflect on. The paper suggests that in order to achieve the laudable aims of social learning, we need to peel back the common rhetoric of its participatory aims and acknowledge the complexity, flexibility and dedication that it requires.
- Full Text:
- Date Issued: 2011
- Authors: Kulundu, Injairu
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/386530 , vital:68149 , xlink:href="https://www.ajol.info/index.php/sajee/article/view/122249"
- Description: This paper reflects on the practice of social learning by using my experiences as a social development practitioner in two projects. The first, the Arkwork Collective, is an art-junk process that engages marginalised youth in Grahamstown, South Africa in a process that uses creative sculpture and drama to explore personal and social issues that exist in their immediate context. The second, Jonga Phambili Sinethemba looks into the impact of climate change and HIV/AIDS (amongst other issues) in the rural and peri-urban communities of Willowvale and Lesseyton in the Eastern Cape, South Africa. It seeks to provide a platform where members of each community can define the vulnerabilities, capabilities, social networks in their areas with the aim of bolstering the adaptive capacity of these communities. Snippets of my experiences in these projects are shared with the intention of demonstrating constraints to learning in a social context. Key ideas that the paper explores include honouring the lived experiences of participants as part of the process, prioritising the participation of each individual present as part of the ongoing conversation, the challenge of surfacing the vital independent links of a collective, drawing on the reflective capacity of a diverse group, assessing the quality of participation, building capabilities for ‘response-ability’ and rethinking facilitation. Each section sets out challenges and questions for practitioners in this field to reflect on. The paper suggests that in order to achieve the laudable aims of social learning, we need to peel back the common rhetoric of its participatory aims and acknowledge the complexity, flexibility and dedication that it requires.
- Full Text:
- Date Issued: 2011
SOA driven architectures for service creation through enablers in an IMS testbed
- Tsietsi, Mosiuoa, Terzoli, Alfredo, Wells,George C
- Authors: Tsietsi, Mosiuoa , Terzoli, Alfredo , Wells,George C
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/430726 , vital:72711 , https://ieeexplore.ieee.org/abstract/document/6144230
- Description: Standards development organisations have long been in agreement that the most appropriate and cost effective way of developing services for the IP Multimedia Subsystem (IMS) is through the use - and re-use - of service capabilities, which are the building blocks for developing complex services. IMS specifications provide a theoretical framework for how service capabilities can be aggregated into large service appli-cations. However, there is little evidence that mainstream IMS service development is capability-based, and many services are still designed in a monolithic way, with no re-use of existing functionality. Telecom-munication networks are well positioned to stimulate the Internet ser-vices market by exposing these service enablers to third parties. In this paper, we marry the two issues by defining an extended IMS service layer (EISL) that provides a service broker that is the central agent in both service interaction management and the execution of external re-quests from third parties. A prototypical implementation of the service broker is described that was developed using a converged SIP servlet container, and a discussion is also provided that details how third party developers could use HTTP APIs to interact with a service broker in or-der to gain access to network capabilities.
- Full Text:
- Date Issued: 2011
- Authors: Tsietsi, Mosiuoa , Terzoli, Alfredo , Wells,George C
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/430726 , vital:72711 , https://ieeexplore.ieee.org/abstract/document/6144230
- Description: Standards development organisations have long been in agreement that the most appropriate and cost effective way of developing services for the IP Multimedia Subsystem (IMS) is through the use - and re-use - of service capabilities, which are the building blocks for developing complex services. IMS specifications provide a theoretical framework for how service capabilities can be aggregated into large service appli-cations. However, there is little evidence that mainstream IMS service development is capability-based, and many services are still designed in a monolithic way, with no re-use of existing functionality. Telecom-munication networks are well positioned to stimulate the Internet ser-vices market by exposing these service enablers to third parties. In this paper, we marry the two issues by defining an extended IMS service layer (EISL) that provides a service broker that is the central agent in both service interaction management and the execution of external re-quests from third parties. A prototypical implementation of the service broker is described that was developed using a converged SIP servlet container, and a discussion is also provided that details how third party developers could use HTTP APIs to interact with a service broker in or-der to gain access to network capabilities.
- Full Text:
- Date Issued: 2011