Muco-adhesive clarithromycin-loaded nanostructured lipid carriers for ocular delivery: Formulation, characterization, cytotoxicity and stability
- Authors: Makoni, Pedzisai A , Khamanga, Sandile M , Walker, Roderick B
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183150 , vital:43916 , xlink:href="https://doi.org/10.1016/j.jddst.2020.102171"
- Description: Topical ophthalmic formulations are the preferred approach to treat the anterior segment of the eye as it is a non-invasive therapeutic approach. The ocular bioavailability of drugs is generally limited, due to the presence of impervious anatomical barriers and low residence time and contact with the target tissue. Optimization of clarithromycin-loaded nanostructured lipid carriers using Design of Experiments was undertaken. Manufacture of nanostructured lipid carriers was achieved using hot emulsification ultrasonication. Formulation and process parameters were successfully identified following screening and subsequently optimized using Tween® 20, as a stabilizer. Muco-adhesive properties that could potentially increase ocular residence time, in vitro clarithromycin release and cytotoxicity against HeLa cells were evaluated. Short term stability studies of the optimized lipidic formulations was assessed at 4 °C and 22 °C. The optimized formulation exhibited muco-adhesive properties under stationary conditions assessed using Laser Doppler Anemometry, sustained release of API over 24 h under in vitro conditions. In vitro cytotoxicity studies revealed that the NLC were less cytotoxic to HeLa cells in comparison to pure API. The results suggest that the optimized carriers may have the potential to enhance precorneal retention, increase ocular availability and permit dose reduction or permit use of a longer dosing frequency.
- Full Text:
- Date Issued: 2021
Design, Optimization, Manufacture and Characterization of Efavirenz-Loaded Flaxseed Oil Nanoemulsions
- Authors: Mazonde, Priveledge , Khamanga, Sandile M , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183183 , vital:43919 , xlink:href="https://doi.org/10.3390/pharmaceutics12090797"
- Description: The formation, manufacture and characterization of low energy water-in-oil (w/o) nanoemulsions prepared using cold pressed flaxseed oil containing efavirenz was investigated. Pseudo-ternary phase diagrams were constructed to identify the nanoemulsion region(s). Other potential lipid-based drug delivery phases containing flaxseed oil with 1:1 m/m surfactant mixture of Tween® 80, Span® 20 and different amounts of ethanol were tested to characterize the impact of surfactant mixture on emulsion formation. Flaxseed oil was used as the oil phase as efavirenz exhibited high solubility in the vehicle when compared to other vegetable oils tested. Optimization of surfactant mixtures was undertaken using design of experiments, specifically a D-optimal design with the flaxseed oil content set at 10% m/m. Two solutions from the desired optimization function were produced based on desirability and five nanoemulsion formulations were produced and characterized in terms of in vitro release of efavirenz, physical and chemical stability. Metastable nanoemulsions containing 10% m/m flaxseed oil were successfully manufactured and significant isotropic gel (semisolid) and o/w emulsions were observed during phase behavior studies. Droplet sizes ranged between 156 and 225 nm, zeta potential between −24 and −41 mV and all formulations were found to be monodisperse with polydispersity indices ≤ 0.487.
- Full Text:
- Date Issued: 2020
Formulation and Characterisation of a Combination Captopril and Hydrochlorothiazide Microparticulate Dosage Form
- Authors: Chikukwa, Mellisa T R , Walker, Roderick B , Khamanga, Sandile M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183200 , vital:43926 , xlink:href="https://doi.org/10.3390/pharmaceutics12080712"
- Description: Cardiovascular diseases such as hypertension and cardiac failure in South African children and adolescents are effectively managed long term, using a combination treatment of captopril and hydrochlorothiazide. The majority of commercially available pharmaceutical products are designed for adult patients and require extemporaneous manipulation, prior to administration to paediatric patients. There is a need to develop an age appropriate microparticulate dosing technology that is easy to swallow, dose and alter doses whilst overcoming the pharmacokinetic challenges of short half-life and biphasic pharmacokinetic disposition exhibited by hydrochlorothiazide and captopril. An emulsion solvent evaporation approach using different combinations of polymers was used to manufacture captopril and hydrochlorothiazide microparticles. Design of experiments was used to develop and analyse experimental data, and identifyoptimum formulation and process conditions for the preparation of the microparticles. Characterisation studies to establish encapsulation efficiency, in vitro release, shape, size and morphology of the microparticles were undertaken. The microparticles produced were in the micrometre size range, with an encapsulation efficiency >75% for both hydrochlorothiazide and captopril. The microparticulate technology is able to offer potential resolution to the half-life mediated dosing frequency of captopril as sustained release of the molecule was observed over a 12-h period. The release of hydrochlorothiazide of >80% suggests an improvement in solubility limited dissolution.
- Full Text:
- Date Issued: 2020
Formulation optimization of smart thermosetting lamotrigine loaded hydrogels using response surface methodology, box benhken design and artificial neural networks
- Authors: Melamane, Siyabonga , Walker, Roderick B , Khamanga, Sandile M
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183265 , vital:43936 , xlink:href="https://doi.org/10.1080/03639045.2020.1791163"
- Description: The aim of this research was to develop lamotrigine containing thermosetting hydrogel for intranasal administration to manage and treat generalized epilepsy. Thermosetting hydrogels were prepared using different ratios of poloxamer 407 (L127), poloxamer 188 (L68) and CarbopolVR 974 P NF (C974) using the cold production process. The in situ thermosetting hydrogel was optimized using Box Behken design. Co-solvency approach was used to increase the solubility of lamotrigine by dissolving it in propylene glycol and polyethylene glycol 400 (0.2: 0.8) and the resultant solution was incorporated in the hydrogel to manufacture an LTG hydrogel. The presence of a higher amount of L127 resulted in higher viscosity at 22 0C and 34 0C and decreased the overall release of LTG. An increase in the amount of C974 resulted in a decrease in the pH of the hydrogel. The results show that formulations F10, F12, F13, F14, F15, F16 and F17 exhibited acceptable thermosetting behavior, pH and released adequate Lamotrigine above the minimum effective concentration to treat generalized epilepsy. The optimized formulation exhibited acceptable thermosetting behavior, pH and lamotrigine release but formed a stiff gel at 22 0C. The average LTG content of the optimized hydrogel was 5.00 ± 0.0225mg/ml with % recovery of 99.17%. The amount of LTG released at 12 h from the optimized hydrogel was 3.21 ± 0.0155mg and will be therapeutically effective in the brain after absorption via the olfactory region in the nasal cavity.
- Full Text:
- Date Issued: 2020
The use of quantitative analysis and Hansen solubility parameter predictions for the selection of excipients for lipid nanocarriers to be loaded with water soluble and insoluble compounds
- Authors: Makoni, Pedzisai A , Ranchhod, Janeeta , Khamanga, Sandile M , Walker, Roderick B
- Date: 2020
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183376 , vital:43981 , xlink:href="https://doi.org/10.1016/j.jsps.2020.01.010"
- Description: The aim of these studies was to determine the miscibility of different API with lipid excipients to predict drug loading and encapsulation properties for the production of solid lipid nanoparticles and nanostructured lipid carriers. Five API exhibiting different physicochemical characteristics, viz., clarithromycin, efavirenz, minocycline hydrochloride, mometasone furoate, and didanosine were used and six solid lipids in addition to four liquid lipids were investigated. Determination of solid and liquid lipids with the best solubilization potential for each API were performed using a traditional shake-flask method and/or a modification thereof. Hansen solubility parameters of the API and different solid and liquid lipids were estimated from their chemical structure using Hiroshi Yamamoto’s molecular breaking method of Hansen Solubility Parameters in Practice software. Experimental results were in close agreement with solubility parameter predictions for systems with ΔδT larger than 4.0 MPa1/2. A combination of Hansen solubility parameters with experimental drug-lipid miscibility tests can be successfully applied to predict lipids with the best solubilizing potential for different API prior to manufacture of solid lipid nanoparticles and nanostructured lipid carriers.
- Full Text:
- Date Issued: 2020
An artificial neural network approach to predict the effects of formulation and process variables on prednisone release from a multipartite system
- Authors: Manda, Arthur , Walker, Roderick B , Khamanga, Sandile M
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183237 , vital:43933 , xlink:href="https://doi.org/10.3390/pharmaceutics11030109"
- Description: The impact of formulation and process variables on the in-vitro release of prednisone from a multiple-unit pellet system was investigated. Box-Behnken Response Surface Methodology (RSM) was used to generate multivariate experiments. The extrusion-spheronization method was used to produce pellets and dissolution studies were performed using United States Pharmacopoeia (USP) Apparatus 2 as described in USP XXIV. Analysis of dissolution test samples was performed using a reversed-phase high-performance liquid chromatography (RP-HPLC) method. Four formulation and process variables viz., microcrystalline cellulose concentration, sodium starch glycolate concentration, spheronization time and extrusion speed were investigated and drug release, aspect ratio and yield were monitored for the trained artificial neural networks (ANN). To achieve accurate prediction, data generated from experimentation were used to train a multi-layer perceptron (MLP) using back propagation (BP) and the Broyden-Fletcher-Goldfarb-Shanno (BFGS) 57 training algorithm until a satisfactory value of root mean square error (RMSE) was observed. The study revealed that the in-vitro release profile of prednisone was significantly impacted by microcrystalline cellulose concentration and sodium starch glycolate concentration. Increasing microcrystalline cellulose concentration retarded dissolution rate whereas increasing sodium starch glycolate concentration improved dissolution rate. Spheronization time and extrusion speed had minimal impact on prednisone release but had a significant impact on extrudate and pellet quality. This work demonstrated that RSM can be successfully used concurrently with ANN for dosage form manufacture to permit the exploration of experimental regions that are omitted when using RSM alone.
- Full Text:
- Date Issued: 2019
Design, evaluation and optimization of taste masked clarithromycin powder
- Authors: Ntemi, Pascal V , Walker, Roderick B , Khamanga, Sandile M
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183503 , vital:44001 , xlink:href="https://doi.org/10.1691/ph.2019.8116"
- Description: Clarithromycin (CLA) is an extremely bitter macrolide antibiotic used to treat paediatric and adult infections. The bitter taste affects patient adherence and may compromise therapy. This research developed a taste masked CLA resinate using Indion® 234, a weak acidic cation exchange resin. The factors affecting formation of the CLA-resin complex were assessed. Design of experiments was used to optimize response while evaluating input variables such as temperature, CLA-resin ratio,stirring time and pH. CLA loading efficiency was determined spectrophotometrically and CLA release using USP Apparatus II. Differential Scanning Calorimetry (DSC), Scanning Electron Microscop (SEM), Fourier Transform Infrared (FT-IR) Spectroscopy and X-ray Diffraction (XRD) were used to confirm complex formation. A spectrophotometric method was used to assess taste evaluation. The optimum CLA-resin ratio, temperature, and stirring time were 1:4, 80 °C, 3 hours, respectively, at pH 8. Characterization techniques revealed that CLA was crystalline and the complex amorphous in nature. FT-IR spectra of resinate revealed the absence of resonance due to the tertiary amine functional group that is responsible for the bitter taste of CLA. CLA was stable in simulated salivary fluid and was released within 3 hours in gastric fluid. All CLAresin batches revealed complete taste masking. Taste analysis highlighted the improvement of taste masking properties of the resinate as the CLA to resin ratio, increased.
- Full Text:
- Date Issued: 2019
Stability indicating HPLC-ECD method for the analysis of clarithromycin in pharmaceutical dosage forms: Method scaling versus re-validation.
- Authors: Makoni, Pedzisai A , Chikukwa, Mellisa T R , Khamanga, Sandile M , Walker, Roderick B
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183387 , vital:43984 , xlink:href="https://doi.org/10.3390/scipharm87040031"
- Description: An isocratic high-performance liquid chromatographic method using electrochemical detection (HPLC-ECD) for the quantitation of clarithromycin (CLA) was developed using Response Surface Methodology (RSM) based on a Central Composite Design (CCD). The method was validated using International Conference on Harmonization (ICH) guidelines with an analytical run time of 20 min. Method re-validation following a change in analytical column was successful in reducing the analytical run time to 13 min, decreasing solvent consumption thus facilitating environmental and financial sustainability. The applicability of using the United States Pharmacopeia (USP) method scaling approach in place of method re-validation using a column with a different L–designation to the original analytical column, was investigated. The scaled method met all USP system suitability requirements for resolution, tailing factor and % relative standard deviation (RSD). The re-validated and scaled method was successfully used to resolve CLA from manufacturing excipients in commercially available dosage forms. Although USP method scaling is only permitted for columns within the same L-designation, these data suggest that it may also be applicable to columns of different designation.
- Full Text:
- Date Issued: 2019
The use of experimental design for the development and validation of an HPLC-ECD method for the quantitation of efavirenz
- Authors: Makoni, Pedzisai A , Khamanga, Sandile M , Kasongo, Kasongo W , Walker, Roderick B
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183556 , vital:44006 , xlink:href="https://doi.org/10.1691/ph.2018.8074"
- Description: A high performance liquid chromatography with electrochemical detection (HPLC-ECD) method for the quantitation of efavirenz (EFV) was developed, since traditional HPLC-UV methods may be inappropriate, given that EFV undergoes photolytic degradation following exposure to UV light. This work describes the use of response surface methodology (RSM) based on a central composite design (CCD) to develop a stability-indicating HPLC method with pulsed ECD in direct current (DC) mode at an applied potential difference and current of +1400 mV and 1.0 μA for the analysis of EFV. Separation of EFV and imipramine was achieved using a Nova-Pak®C18 cartridge column and a mobile phase of phosphate buffer (pH 4.5): acetonitrile (ACN) (55:45 v/v). Mobile phase pH, buffer molarity, ACN concentration and applied potential difference were investigated. The optimized method produced sharp well resolved peaks for imipramine and EFV with retention times of 3.70 and 8.89 minutes. The calibration curve was linear (R2 = 0.9979) over the range 5-70 μg/mL. Repeatability and intermediate precision ranged between 3.37 and 4.34 % RSD and 1.31 and 4.29 % RSD and accuracy between -0.80 and 4.71 % bias. The LOQ and LOD were 5.0 and 1.5 μg/mL. The method was specific for EFV and was used to analyse EFV in commercially available tablets. The HPLC-ECD method is more suitable for quantitative analysis of EFV than HPLC-UV.
- Full Text:
- Date Issued: 2018
The use of experimental design for the development of a capillary zone electrophoresis method for the quantitation of captopril
- Authors: Mukozhiwa, S Y , Khamanga, Sandile M , Walker, Roderick B
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183828 , vital:44073 , xlink:href="https://doi.org/10.1691/ph.2017.7071"
- Description: A capillary zone electrophoresis (CZE) method for the quantitation of captopril (CPT) using UV detection was developed. Influence of electrolyte concentration and system variables on electrophoretic separation was evaluated and a central composite design (CCD) was used to optimize the method. Variables investigated were pH, molarity, applied voltage and capillary length. The influence of sodium metabisulphite on the stability of test solutions was also investigated. The use of sodium metabisulphite prevented degradation of CPT over 24 hours. A fused uncoated silica capillary of 67.5cm total and 57.5 cm effective length was used for analysis. The applied voltage and capillary length affected the migration time of CPT significantly. A 20 mM phosphate buffer adjusted to pH 7.0 was used as running buffer and an applied voltage of 23.90 kV was suitable to effect a separation. The optimized electrophoretic conditions produced sharp, well-resolved peaks for CPT and sodium metabisulphite. Linear regression analysis of the response for CPT standards revealed the method was linear (R2 = 0.9995) over the range 5-70 μg/mL. The limits of quantitation and detection were 5 and 1.5 μg/mL. A simple, rapid and reliable CZE method has been developed and successfully applied to the analysis of commercially available CPT products.
- Full Text:
- Date Issued: 2017
The impact of manufacturing variables on in vitro release of clobetasol 17-propionate from pilot scale cream formulations
- Authors: Fauzee, Ayesha F B , Khamanga, Sandile M , Walker, Roderick B
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/183872 , vital:44077 , xlink:href="https://doi.org/10.3109/03639045.2013.842579"
- Description: The purpose of the study was to evaluate the effect of different homogenization speeds and times, anchor speeds and cooling times on the viscosity and cumulative % clobetasol 17-propionate released per unit area at 72 h from pilot scale cream formulations. A 24 full factorial central composite design for four independent variables were investigated. Thirty pilot scale batches of cream formulations were manufactured using a Wintech® cream/ointment plant. The viscosity and in vitro release of CP were monitored and compared to an innovator product that is commercially available on the South African market, namely, Dermovate® cream. Contour and three-dimensional response surface plots were produced and the viscosity and cumulative % CP released per unit area at 72 h were found to be primarily dependent on the homogenization and anchor speeds. An increase in the homogenization and anchor speeds appeared to exhibit a synergistic effect on the resultant viscosity of the cream whereas an antagonistic effect was observed for the in vitro release of CP from the experimental cream formulations. The in vitro release profiles were best fitted to a Higuchi model and diffusion proved to be the dominant mechanism of drug release that was confirmed by use of the Korsmeyer–Peppas model. The research was further validated and confirmed by the high prognostic ability of response surface methodology (RSM) with a resultant mean percentage error of (±SD) 0.17 ± 0.093 suggesting that RSM may be an efficient tool for the development and optimization of topical formulations.
- Full Text:
- Date Issued: 2014
The use of response surface methodology in the evaluation of captopril microparticles manufactured using an oil in oil solvent evaporation technique
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184221 , vital:44191 , xlink:href="https://doi.org/10.3109/02652048.2011.629744"
- Description: Captopril (CPT) microparticles were manufactured by solvent evaporation using acetone (dispersion phase) and liquid paraffin (manufacturing phase) with Eudragit® and Methocel® as coat materials. Design of experiments and response surface methodology (RSM) approaches were used to optimize the process. The microparticles were characterized based on the percent of drug released and yield, microcapsule size, entrapment efficiency and Hausner ratio. Differential scanning calorimetry (DSC), Infrared (IR) spectroscopy, scanning electron microscopy (SEM) and in vitro dissolution studies were conducted. The microcapsules were spherical, free-flowing and IR and DSC thermograms revealed that CPT was stable. The percent drug released was investigated with respect to Eudragit® RS and Methocel® K100M, Methocel® K15M concentrations and homogenizing speed. The optimal conditions for microencapsulation were 1.12 g Eudragit® RS, 0.67 g Methocel® K100M and 0.39 g Methocel® K15M at a homogenizing speed of 1643 rpm and 89% CPT was released. The value of RSM-mediated microencapsulation of CPT was elucidated.
- Full Text:
- Date Issued: 2012
Drug transport mechanisms from carbopol/eudragit verapamil sustained-release tablets
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184801 , vital:44273 , xlink:href="https://doi.org/10.14227/dt180311p30"
- Description: The objectives of this study were to compare dissolution profiles of a verapamil (VRP) formulation manufactured inhouse and Isoptin SR using USP Apparatus 2 and 3 and to elucidate drug release kinetics of these dosage forms. Eudragit NE 30D (ethyl acrylate–methyl methacrylate copolymer in a 2:1 ratio) aqueous dispersion was used as a granulating binder for the manufacture of VRP mini-matrix sustained-release tablets. The wet granulation process was performed to prepare free-flowing granules that were blended with Carbopol. The tablets were manufactured using a single-punch press by compression of the granules with magnesium stearate as a lubricant. Drug release was determined in phosphate buffer solution using USP Apparatus 2 and 3. Dissolution data were fitted to zero- and first-order models; in addition, the kinetic data were determined by evaluation of Higuchi release kinetics. The mechanism of drug release was established using the Korsmeyer–Peppas model. In general, all tablets showed high mechanical resistance with less than 1% friability. There was no significant difference between the dissolution profiles of the formulation manufactured in-house and the commercially available product. The release mechanism of the formulated and marketed products was controlled by anomalous non-Fickian diffusion. VRP release was prolonged for 12 h indicating the usefulness of the formulation as a twice-daily dosage form. The mechanism of drug release for the dosage forms was unaffected by the choice of apparatus.
- Full Text:
- Date Issued: 2011
The use of experimental design in the development of an HPLC–ECD method for the analysis of captopril
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184056 , vital:44163 , xlink:href="https://doi.org/10.1016/j.talanta.2010.11.025"
- Description: An accurate, sensitive and specific high performance liquid chromatography–electrochemical detection (HPLC–ECD) method that was developed and validated for captopril (CPT) is presented. Separation was achieved using a Phenomenex® Luna 5 μm (C18) column and a mobile phase comprised of phosphate buffer (adjusted to pH 3.0): acetonitrile in a ratio of 70:30 (v/v). Detection was accomplished using a full scan multi channel ESA Coulometric detector in the “oxidative-screen” mode with the upstream electrode (E1) set at +600 mV and the downstream (analytical) electrode (E2) set at +950 mV, while the potential of the guard cell was maintained at +1050 mV. The detector gain was set at 300. Experimental design using central composite design (CCD) was used to facilitate method development. Mobile phase pH, molarity and concentration of acetonitrile (ACN) were considered the critical factors to be studied to establish the retention time of CPT and cyclizine (CYC) that was used as the internal standard. Twenty experiments including centre points were undertaken and a quadratic model was derived for the retention time for CPT using the experimental data. The method was validated for linearity, accuracy, precision, limits of quantitation and detection, as per the ICH guidelines. The system was found to produce sharp and well-resolved peaks for CPT and CYC with retention times of 3.08 and 7.56 min, respectively. Linear regression analysis for the calibration curve showed a good linear relationship with a regression coefficient of 0.978 in the concentration range of 2–70 μg/mL. The linear regression equation was y = 0.0131x + 0.0275. The limits of detection (LOQ) and quantitation (LOD) were found to be 2.27 and 0.6 μg/mL, respectively. The method was used to analyze CPT in tablets. The wide range for linearity, accuracy, sensitivity, short retention time and composition of the mobile phase indicated that this method is better for the quantification of CPT than the pharmacopoeial methods.
- Full Text:
- Date Issued: 2011
Swelling, erosion and drug release characteristics of salbutamol sulfate from hydroxypropyl methylcellulose-based matrix tablets
- Authors: Chaibva, Faith A , Khamanga, Sandile M , Walker, Roderick B
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184139 , vital:44177 , xlink:href="https://doi.org/10.3109/03639045.2010.488648"
- Description: Background: Hydrophilic matrix formulations are important and simple technologies that are used to manufacture sustained release dosage forms. Method: Hydroxypropyl methylcellulose-based matrix tablets, with and without additives, were manufactured to investigate the rate of hydration, rate of erosion, and rate and mechanism of drug release. Scanning electron microscopy was used to assess changes in the microstructure of the tablets during drug release testing and whether these changes could be related to the rate of drug release from the formulations. Results: The results revealed that the rate of hydration and erosion was dependent on the polymer combination(s) used, which in turn affected the rate and mechanism of drug release from these formulations. It was also apparent that changes in the microstructure of matrix tablets could be related to the different rates of drug release that were observed from the test formulations. Conclusion: The use of scanning electron microscopy provides useful information to further understand drug release mechanisms from matrix tablets.
- Full Text:
- Date Issued: 2010
Evaluation of rate of swelling and erosion of verapamil (VRP) sustained-release matrix tablets
- Authors: Khamanga, Sandile M , Walker, Roderick B
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/184232 , vital:44192 , xlink:href="https://doi.org/10.1080/03639040600599822"
- Description: Tablets manufactured in-house were compared to a marketed sustained-release product of verapamil to investigate the rate of hydration, erosion, and drug-release mechanism by measuring the wet and subsequent dry weights of the products. Swelling and erosion rates depended on the polymer and granulating fluid used, which ultimately pointed to their permeability characteristics. Erosion rate of the marketed product was highest, which suggests that the gel layer that formed around these tablets was weak as opposed to the robust and resistant layers of test products. Anomalous and near zero-order transport mechanisms were dominant in tests and commercial product, respectively.
- Full Text:
- Date Issued: 2006