F-and F+-band radioluminescence and the influence of annealing on its emission spectra in Al2O3: C, Mg:
- Chithambo, Makaiko L, Kalita, Jitumani M, Finch, A A
- Authors: Chithambo, Makaiko L , Kalita, Jitumani M , Finch, A A
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/150130 , vital:38942 , https://doi.org/10.1016/j.radmeas.2020.106306
- Description: Radioluminescence spectra of Al2O3:C,Mg monitored at temperatures up to 400 °C is reported. Measurements were made on samples either as received or on ones annealed at 1200 °C. Radioluminescence is observed at 410 nm for the unannealed sample but principally at 330 and 410 nm in the annealed sample with the emission at 330 nm dominant. Both bands are subject to thermal quenching but the change for the F+ band is atypical. Temperature induced effects on these and other bands are discussed, as are complementary measurements of thermoluminescence spectra.
- Full Text:
- Date Issued: 2020
- Authors: Chithambo, Makaiko L , Kalita, Jitumani M , Finch, A A
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/150130 , vital:38942 , https://doi.org/10.1016/j.radmeas.2020.106306
- Description: Radioluminescence spectra of Al2O3:C,Mg monitored at temperatures up to 400 °C is reported. Measurements were made on samples either as received or on ones annealed at 1200 °C. Radioluminescence is observed at 410 nm for the unannealed sample but principally at 330 and 410 nm in the annealed sample with the emission at 330 nm dominant. Both bands are subject to thermal quenching but the change for the F+ band is atypical. Temperature induced effects on these and other bands are discussed, as are complementary measurements of thermoluminescence spectra.
- Full Text:
- Date Issued: 2020
Optically stimulated luminescence and spectral emission features of radioluminescence and thermoluminescence of natural kunzite:
- Alatishe, M A, Ogundare, F O, Folley, Damilola E, Chithambo, Makaiko L, Chikwembani, S
- Authors: Alatishe, M A , Ogundare, F O , Folley, Damilola E , Chithambo, Makaiko L , Chikwembani, S
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/160478 , vital:40449 , https://doi.org/10.1016/j.radmeas.2020.106457
- Description: Features of luminescence optically stimulated from natural kunzite using 470 nm blue light are reported. Preparatory measurements of its X-ray excited radioluminescence and thermoluminescence show that the sample has two main bands centered at 360 nm and 600 nm. The optically stimulated luminescence discussed in this report was monitored in the UV region and is presumed to be the same 360 nm emission that appears in the radioluminescence and thermoluminescence spectra. The glow curve shows at least three peaks at 74, 202, 432 oC for heating at 1 oC and the third one is a composite of two. Only the first two peaks are deduced to contribute most of the optically stimulated luminescence.
- Full Text:
- Date Issued: 2020
- Authors: Alatishe, M A , Ogundare, F O , Folley, Damilola E , Chithambo, Makaiko L , Chikwembani, S
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/160478 , vital:40449 , https://doi.org/10.1016/j.radmeas.2020.106457
- Description: Features of luminescence optically stimulated from natural kunzite using 470 nm blue light are reported. Preparatory measurements of its X-ray excited radioluminescence and thermoluminescence show that the sample has two main bands centered at 360 nm and 600 nm. The optically stimulated luminescence discussed in this report was monitored in the UV region and is presumed to be the same 360 nm emission that appears in the radioluminescence and thermoluminescence spectra. The glow curve shows at least three peaks at 74, 202, 432 oC for heating at 1 oC and the third one is a composite of two. Only the first two peaks are deduced to contribute most of the optically stimulated luminescence.
- Full Text:
- Date Issued: 2020
Thermoluminescence properties of potassium fluoride:
- Ogundare, F O, Folley, Damilola E, Chithambo, Makaiko L, Arise, T O
- Authors: Ogundare, F O , Folley, Damilola E , Chithambo, Makaiko L , Arise, T O
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/160500 , vital:40451 , https://doi.org/10.1016/j.nimb.2020.09.009
- Description: This study is designed to examine the thermoluminescence characteristics of potassium fluoride for possible use as a thermoluminescence dosemeter. Thermoluminescence measurements were carried out at doses up to 20 Gy and heating rates between 0.2 and 4°C/s. The glow curve of the fluoride, readout at 1°Cs−1, exhibited two peaks at 130 and 250 °C. In addition, two shoulder peaks appeared at 70 and 200°C.
- Full Text:
- Date Issued: 2020
- Authors: Ogundare, F O , Folley, Damilola E , Chithambo, Makaiko L , Arise, T O
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/160500 , vital:40451 , https://doi.org/10.1016/j.nimb.2020.09.009
- Description: This study is designed to examine the thermoluminescence characteristics of potassium fluoride for possible use as a thermoluminescence dosemeter. Thermoluminescence measurements were carried out at doses up to 20 Gy and heating rates between 0.2 and 4°C/s. The glow curve of the fluoride, readout at 1°Cs−1, exhibited two peaks at 130 and 250 °C. In addition, two shoulder peaks appeared at 70 and 200°C.
- Full Text:
- Date Issued: 2020
A comparative study of the dosimetric features of α-Al2O3: C, Mg and α-Al2O3: C
- Kalita, Jitumani M, Chithambo, Makaiko L
- Authors: Kalita, Jitumani M , Chithambo, Makaiko L
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/113058 , vital:33694 , https://doi.org/10.1093/rpd/ncx039
- Description: A comparative study of the dosimetric features of α-Al2O3:C,Mg and α-Al2O3:C relevant to thermoluminescence dosimetry is reported. A glow curve of α-Al2O3:C,Mg measured at 1°C/s after beta irradiation to 1 Gy shows two subsidiary peaks at 42°C (labelled as I) and 72°C (II) and the main peak at 161°C (III) whereas a glow curve of α-Al2O3:C measured under the same conditions shows the main peak at 178°C (II′) and a lower intensity peak at 48°C (I′). Apart from these ones, there are several other peaks at temperatures beyond that of the main peak in both α-Al2O3:C,Mg and α-Al2O3:C. However, the latter are not included in this study. We report a comparative quantitative analysis of dose response and fading of peaks I, II and III of α-Al2O3:C,Mg and peaks I′ and II′ of α-Al2O3:C. Analysis shows that the dose response of peaks I and III is sublinear within 1–10 Gy whereas that of peak II is superlinear within 1–4 Gy followed by a sublinear region within 4–10 Gy. In comparison, the dose response of peak I′ is superlinear within 1–4 Gy followed by a sublinear region within 4–10 Gy whereas that of peak II′ is sublinear within 1–4 Gy followed by a superlinear region within 4–10 Gy. As regards to fading corresponding to 1 Gy, peak I is very unstable and fades within 300 s, peak II is more stable and takes up to 43200 s to fade. In comparison, peak III fades down to 30% of its initial intensity within 2400 s. Interestingly, between 2400 and 800 s, the intensity fades by 17% only. Regarding fading in α-Al2O3:C, peak I′ fades within 600 s whereas peak II′ shows an inverse fading behaviour up to 64800 s. The rate of fading for peaks I, II and III in α-Al2O3:C,Mg was found to decrease with increase in dose. However, no such behaviour was observed in α-Al2O3:C. The fading in both samples is discussed on the basis of a charge hopping mechanism.
- Full Text:
- Date Issued: 2017
- Authors: Kalita, Jitumani M , Chithambo, Makaiko L
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/113058 , vital:33694 , https://doi.org/10.1093/rpd/ncx039
- Description: A comparative study of the dosimetric features of α-Al2O3:C,Mg and α-Al2O3:C relevant to thermoluminescence dosimetry is reported. A glow curve of α-Al2O3:C,Mg measured at 1°C/s after beta irradiation to 1 Gy shows two subsidiary peaks at 42°C (labelled as I) and 72°C (II) and the main peak at 161°C (III) whereas a glow curve of α-Al2O3:C measured under the same conditions shows the main peak at 178°C (II′) and a lower intensity peak at 48°C (I′). Apart from these ones, there are several other peaks at temperatures beyond that of the main peak in both α-Al2O3:C,Mg and α-Al2O3:C. However, the latter are not included in this study. We report a comparative quantitative analysis of dose response and fading of peaks I, II and III of α-Al2O3:C,Mg and peaks I′ and II′ of α-Al2O3:C. Analysis shows that the dose response of peaks I and III is sublinear within 1–10 Gy whereas that of peak II is superlinear within 1–4 Gy followed by a sublinear region within 4–10 Gy. In comparison, the dose response of peak I′ is superlinear within 1–4 Gy followed by a sublinear region within 4–10 Gy whereas that of peak II′ is sublinear within 1–4 Gy followed by a superlinear region within 4–10 Gy. As regards to fading corresponding to 1 Gy, peak I is very unstable and fades within 300 s, peak II is more stable and takes up to 43200 s to fade. In comparison, peak III fades down to 30% of its initial intensity within 2400 s. Interestingly, between 2400 and 800 s, the intensity fades by 17% only. Regarding fading in α-Al2O3:C, peak I′ fades within 600 s whereas peak II′ shows an inverse fading behaviour up to 64800 s. The rate of fading for peaks I, II and III in α-Al2O3:C,Mg was found to decrease with increase in dose. However, no such behaviour was observed in α-Al2O3:C. The fading in both samples is discussed on the basis of a charge hopping mechanism.
- Full Text:
- Date Issued: 2017
Dose response and kinetic analysis of thermoluminescence of Li–Zn fluoroborate glass
- Thomas, Sunil, Chithambo, Makaiko L
- Authors: Thomas, Sunil , Chithambo, Makaiko L
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/116164 , vital:34326 , https://doi.org/10.1080/10420150.2017.1313844
- Description: The intention of this study is to explore the thermoluminescence properties of beta-irradiated Li–Zn fluoroborate glass. The glow-curve corresponding to 10 Gy shows two peaks when measured at 1°C/s. The dose response of the glass to beta irradiation was investigated. The trapping level parameters such as activation energy, frequency factor and order of kinetics associated with the observed glow-peak were determined using different methods. The thermoluminescence is affected by thermal quenching. A possible mechanism for the thermoluminescence is described.
- Full Text:
- Date Issued: 2017
- Authors: Thomas, Sunil , Chithambo, Makaiko L
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/116164 , vital:34326 , https://doi.org/10.1080/10420150.2017.1313844
- Description: The intention of this study is to explore the thermoluminescence properties of beta-irradiated Li–Zn fluoroborate glass. The glow-curve corresponding to 10 Gy shows two peaks when measured at 1°C/s. The dose response of the glass to beta irradiation was investigated. The trapping level parameters such as activation energy, frequency factor and order of kinetics associated with the observed glow-peak were determined using different methods. The thermoluminescence is affected by thermal quenching. A possible mechanism for the thermoluminescence is described.
- Full Text:
- Date Issued: 2017
Relative features of the principal and secondary luminescence lifetimes in quartz
- Chithambo, Makaiko L, Ogundare, F O
- Authors: Chithambo, Makaiko L , Ogundare, F O
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125821 , vital:35820 , https://doi.10.1002/pssc.200673721
- Description: Quartz is a common natural mineral with properties that make it amenable for application in radiation dosimetry using luminescence methods [1]. The luminescence properties of quartz including its sensitivity and luminescence lifetimes undergo notable changes when the quartz is annealed, and in particular, near its phase inversion temperatures of 573 and 867 oC [2, 3]. The physical processes leading up to the emission of luminescence in quartz may be investigated using time-resolved optical stimulation. The aim of this method is to separate in time the stimulation and emission of luminescence to enable measurement of time-resolved luminescence spectra which may be resolved into associated lifetimes, defined in this sense as the delay between stimulation and emission of luminescence [4, 5]. A number of such studies show that annealing defines the detailed distribution of lifetimes with measurement temperature as well as the irradiation-dependent characteristics of the lifetimes [3, 6]. In particular, it was noted [3] that spectra measured at certain temperatures could be accurately resolved into more than one component, a scenario that pointed to the possibility of involvement of multiple luminescence centers in the emission of luminescence from quartz. The aim of this work is to build on the findings described, specifically to study the influence of measurement temperature and irradiation on the principal and subsidiary luminescence lifetimes in natural quartz.
- Full Text:
- Date Issued: 2017
- Authors: Chithambo, Makaiko L , Ogundare, F O
- Date: 2017
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125821 , vital:35820 , https://doi.10.1002/pssc.200673721
- Description: Quartz is a common natural mineral with properties that make it amenable for application in radiation dosimetry using luminescence methods [1]. The luminescence properties of quartz including its sensitivity and luminescence lifetimes undergo notable changes when the quartz is annealed, and in particular, near its phase inversion temperatures of 573 and 867 oC [2, 3]. The physical processes leading up to the emission of luminescence in quartz may be investigated using time-resolved optical stimulation. The aim of this method is to separate in time the stimulation and emission of luminescence to enable measurement of time-resolved luminescence spectra which may be resolved into associated lifetimes, defined in this sense as the delay between stimulation and emission of luminescence [4, 5]. A number of such studies show that annealing defines the detailed distribution of lifetimes with measurement temperature as well as the irradiation-dependent characteristics of the lifetimes [3, 6]. In particular, it was noted [3] that spectra measured at certain temperatures could be accurately resolved into more than one component, a scenario that pointed to the possibility of involvement of multiple luminescence centers in the emission of luminescence from quartz. The aim of this work is to build on the findings described, specifically to study the influence of measurement temperature and irradiation on the principal and subsidiary luminescence lifetimes in natural quartz.
- Full Text:
- Date Issued: 2017
Quantitative analysis of time-resolved infrared stimulated luminescence in feldspars
- Pagonis, Vasilis, Ankjærgaard, Christina, Jain, Mayank, Chithambo, Makaiko L
- Authors: Pagonis, Vasilis , Ankjærgaard, Christina , Jain, Mayank , Chithambo, Makaiko L
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124616 , vital:35638 , DOI: 10.1016/j.physb.2016.06.013
- Description: Time-resolved infrared-stimulated luminescence (TR-IRSL) from feldspar samples is of importance in the field of luminescence dating, since it provides information on the luminescence mechanism in these materials. In this paper we present new analytical equations which can be used to analyze TR-IRSL signals, both during and after short infrared stimulation pulses. The equations are developed using a recently proposed kinetic model, which describes localized electronic recombination via tunneling between trapped electrons and recombination centers in luminescent materials. Recombination is assumed to take place from the excited state of the trapped electron to the nearest-neighbor center within a random distribution of luminescence recombination centers. Different possibilities are examined within the model, depending on the relative importance of electron de-excitation and recombination. The equations are applied to experimental TR-IRSL data of natural feldspars, and good agreement is found between experimental and modeling results.
- Full Text:
- Date Issued: 2016
- Authors: Pagonis, Vasilis , Ankjærgaard, Christina , Jain, Mayank , Chithambo, Makaiko L
- Date: 2016
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/124616 , vital:35638 , DOI: 10.1016/j.physb.2016.06.013
- Description: Time-resolved infrared-stimulated luminescence (TR-IRSL) from feldspar samples is of importance in the field of luminescence dating, since it provides information on the luminescence mechanism in these materials. In this paper we present new analytical equations which can be used to analyze TR-IRSL signals, both during and after short infrared stimulation pulses. The equations are developed using a recently proposed kinetic model, which describes localized electronic recombination via tunneling between trapped electrons and recombination centers in luminescent materials. Recombination is assumed to take place from the excited state of the trapped electron to the nearest-neighbor center within a random distribution of luminescence recombination centers. Different possibilities are examined within the model, depending on the relative importance of electron de-excitation and recombination. The equations are applied to experimental TR-IRSL data of natural feldspars, and good agreement is found between experimental and modeling results.
- Full Text:
- Date Issued: 2016
Phosphorescence of orthopaedic–grade ultra high molecular weight polyethylene
- Authors: Chithambo, Makaiko L
- Date: 2008
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125617 , vital:35801 , https://doi.10.1002/pssc.200776802
- Description: Isothermal luminescence decay curves have been measured from orthopaedic–standard ultra high molecular weight polyethylene between 35 and 70 ˚C on the rising edge of the main glow peak at 70 ˚C. Preparatory peak-shape analysis of the temperature-resolved glow peak at 70 ˚C measured at 1 ˚C s–1 gave a geometrical factor close to 0.5 suggestive of second order kinetics for both the isothermal and thermally stimulated luminescence. The results of analysis of the phosphorescence of transformed monotonic-to-peak isothermal decay curves are also second order, as is the conclusion from thermoluminescence glow-curve de-convolution. All methods of analysis give an activation energy of about 0.7 eV.
- Full Text:
- Date Issued: 2008
- Authors: Chithambo, Makaiko L
- Date: 2008
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125617 , vital:35801 , https://doi.10.1002/pssc.200776802
- Description: Isothermal luminescence decay curves have been measured from orthopaedic–standard ultra high molecular weight polyethylene between 35 and 70 ˚C on the rising edge of the main glow peak at 70 ˚C. Preparatory peak-shape analysis of the temperature-resolved glow peak at 70 ˚C measured at 1 ˚C s–1 gave a geometrical factor close to 0.5 suggestive of second order kinetics for both the isothermal and thermally stimulated luminescence. The results of analysis of the phosphorescence of transformed monotonic-to-peak isothermal decay curves are also second order, as is the conclusion from thermoluminescence glow-curve de-convolution. All methods of analysis give an activation energy of about 0.7 eV.
- Full Text:
- Date Issued: 2008
Time-resolved luminescence of low sensitivity quartz from crystalline rocks
- Chithambo, Makaiko L, Preusser, F, Ramseyer, K, Ogundare, F O
- Authors: Chithambo, Makaiko L , Preusser, F , Ramseyer, K , Ogundare, F O
- Date: 2007
- Language: English
- Type: text , article
- Identifier: vital:6801 , http://hdl.handle.net/10962/d1004164 , https://doi.org/10.1016/j.radmeas.2006.07.005
- Description: preprint , Time-resolved luminescence spectra of low sensitivity natural quartz from crystalline rocks are presented. The luminescence was pulse-stimulated at width using 470 nm blue light from quartz separated from plutonic, metamorphic, volcanic and hydrothermal samples. Measurements were made at 20 °C. All samples show evidence of a short lifetime component less than long although in several cases too weak in intensity to be evaluated accurately. On the other hand, the value of the principal lifetime component varies considerably being about in metamorphic quartz, in plutonic quartz, and in one example of hydrothermal quartz. The results illustrate a new feature of luminescence from quartz for which lifetimes less than or greater than have never been reported at room temperature before. It is argued that the thermal provenance of the quartz and so the annealing it will have experienced influences the size of the observed lifetime. In particular, the results are explained in terms of a model consisting of three luminescence centers with the dominant lifetime linked to preferential recombination at one center depending on the thermal history of the sample and hence the hole concentration of the center.
- Full Text:
- Date Issued: 2007
- Authors: Chithambo, Makaiko L , Preusser, F , Ramseyer, K , Ogundare, F O
- Date: 2007
- Language: English
- Type: text , article
- Identifier: vital:6801 , http://hdl.handle.net/10962/d1004164 , https://doi.org/10.1016/j.radmeas.2006.07.005
- Description: preprint , Time-resolved luminescence spectra of low sensitivity natural quartz from crystalline rocks are presented. The luminescence was pulse-stimulated at width using 470 nm blue light from quartz separated from plutonic, metamorphic, volcanic and hydrothermal samples. Measurements were made at 20 °C. All samples show evidence of a short lifetime component less than long although in several cases too weak in intensity to be evaluated accurately. On the other hand, the value of the principal lifetime component varies considerably being about in metamorphic quartz, in plutonic quartz, and in one example of hydrothermal quartz. The results illustrate a new feature of luminescence from quartz for which lifetimes less than or greater than have never been reported at room temperature before. It is argued that the thermal provenance of the quartz and so the annealing it will have experienced influences the size of the observed lifetime. In particular, the results are explained in terms of a model consisting of three luminescence centers with the dominant lifetime linked to preferential recombination at one center depending on the thermal history of the sample and hence the hole concentration of the center.
- Full Text:
- Date Issued: 2007
Accuracy of the activation energy calculated from a thermoluminescence glow‐peak using a method that uses three points on the peak
- Ogundare, F O, Chithambo, Makaiko L
- Authors: Ogundare, F O , Chithambo, Makaiko L
- Date: 2006
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/123016 , vital:35397 , https://doi:10.1002/pssc.200521077
- Description: The utility of thermoluminescence (TL) in detecting changes in defect concentration in insulators is well established [1–3]. The underlying premise leading to the emission of TL is that exposure of a material to ionizing radiation causes a redistribution of charge in defect centres within the material. When the material is heated at a controlled linear rate, the thermoluminescence is emitted as a temperature-dependent set of peaks collectively known as a glow-curve. The shape and intensity of each of the glow-peaks may be characterized by a set of parameters consisting of the activation energy E, the frequency factors, the number of electrons n0 trapped in defect centres at the start of the heating, and the order of kinetics b. The order of kinetics b is an indication of the retrapping probability i.e. the probability that a free electron from the conduction band will be retrapped rather than recombine with a hole at a recombination centre to produce thermoluminescence. Retrapping of electrons reduces the TL intensity at any particular temperature during the heating process. The physical mechanisms of TL associated with a given glow curve are unique and may be characterized by analysis of the glow-curve for the said kinetic parameters.
- Full Text:
- Date Issued: 2006
- Authors: Ogundare, F O , Chithambo, Makaiko L
- Date: 2006
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/123016 , vital:35397 , https://doi:10.1002/pssc.200521077
- Description: The utility of thermoluminescence (TL) in detecting changes in defect concentration in insulators is well established [1–3]. The underlying premise leading to the emission of TL is that exposure of a material to ionizing radiation causes a redistribution of charge in defect centres within the material. When the material is heated at a controlled linear rate, the thermoluminescence is emitted as a temperature-dependent set of peaks collectively known as a glow-curve. The shape and intensity of each of the glow-peaks may be characterized by a set of parameters consisting of the activation energy E, the frequency factors, the number of electrons n0 trapped in defect centres at the start of the heating, and the order of kinetics b. The order of kinetics b is an indication of the retrapping probability i.e. the probability that a free electron from the conduction band will be retrapped rather than recombine with a hole at a recombination centre to produce thermoluminescence. Retrapping of electrons reduces the TL intensity at any particular temperature during the heating process. The physical mechanisms of TL associated with a given glow curve are unique and may be characterized by analysis of the glow-curve for the said kinetic parameters.
- Full Text:
- Date Issued: 2006
Orthopaedic grade ultra–high molecular weight polyethylene: some features of the main thermoluminescence glow curve
- Authors: Chithambo, Makaiko L
- Date: 2006
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125499 , vital:35789 , https://doi.10.1093/rpd/nci661
- Description: Thermoluminescence (TL) characteristics of orthopaedic–grade ultra–high molecular weight polyethylene have been investigated between 20 and 200_C. The TL at 1_C s_1 consists of two glow curves, a weaker intensity peak at 115_C and the main peak at 70_C, studied in this work. TL intensity increases with beta irradiation but with a dose–response influenced by heating rate. On the other hand, the peak maximum is affected by both irradiation and repeated use of a sample. The glow curve shifts to higher temperatures with increase in heating rate but only slightly so with change in beta irradiation dose, properties suggestive of first-order kinetics. Kinetic analysis for activation energy and order of kinetics, based on the discrete trap model, produce somewhat conflicting results. Whereas qualitative analysis of peak symmetry show that first-order kinetics apply, geometrical analysis of the peak shape suggests that the order of kinetics might be other than first-order. Values of activation energy evaluated using the initial rise method were found to be dose dependent and for a given beta dose are in agreement with calculations from peak shape and initial rise methods but less so with results from variable heating rate method.
- Full Text:
- Date Issued: 2006
- Authors: Chithambo, Makaiko L
- Date: 2006
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/125499 , vital:35789 , https://doi.10.1093/rpd/nci661
- Description: Thermoluminescence (TL) characteristics of orthopaedic–grade ultra–high molecular weight polyethylene have been investigated between 20 and 200_C. The TL at 1_C s_1 consists of two glow curves, a weaker intensity peak at 115_C and the main peak at 70_C, studied in this work. TL intensity increases with beta irradiation but with a dose–response influenced by heating rate. On the other hand, the peak maximum is affected by both irradiation and repeated use of a sample. The glow curve shifts to higher temperatures with increase in heating rate but only slightly so with change in beta irradiation dose, properties suggestive of first-order kinetics. Kinetic analysis for activation energy and order of kinetics, based on the discrete trap model, produce somewhat conflicting results. Whereas qualitative analysis of peak symmetry show that first-order kinetics apply, geometrical analysis of the peak shape suggests that the order of kinetics might be other than first-order. Values of activation energy evaluated using the initial rise method were found to be dose dependent and for a given beta dose are in agreement with calculations from peak shape and initial rise methods but less so with results from variable heating rate method.
- Full Text:
- Date Issued: 2006
- «
- ‹
- 1
- ›
- »