Opening up global food trade to developing countries: an evaluation of the World Trade Organisation's agreement on sanitary and phytosanitary measure
- Authors: Nyatsanza, Sharon
- Date: 2013
- Subjects: World Trade Organization , Food contamination , Food handling -- Safety measures
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/27413 , vital:67294
- Description: Food safety and consumer protection has been a major concern of regulators since the 12th century. Sanitary and Phytosanitary (SPS) measures were therefore introduced to protect human, animal and plant safety. With the expansion of international trade came the increase in the use of SPS measures. However these increases in the use of SPS measures were accompanied with their misuse for protectionist purposes. SPS measures which had been created for legitimate purposes quickly became significant barriers to trade. The World Trade Organisation (WTO) adopted the WTO Agreement on Sanitary and Phytosanitary Measures (SPS Agreement) as a mechanism to regulate the use of SPS measures and avoid their potential use as protectionist tools. Trade liberalization and market access has been a primary aim of the WTO, therefore in principle the SPS Agreement is supposed to open up global food trade for all countries.Apart from opening up global food trade, another purpose of the SPS Agreement was to protect the developing countries, accommodate their special needs and in turn promote their economic development. Developing countries are heavily dependent on global food trade for their economic development. However developing states can only benefit from global food trade if they comply with SPS standards set in the importing countries. Considering their reliance on the agro – food sector the economic development of developing states is heavily reliant on the successful implementation of the SPS Agreement. According the SPS Agreement must avoid the use of illegitimate SPS measures and promote market access. It is therefore crucial that the SPS Agreement be analysed to determine whether its text, application and or interpretation satisfies the objective of opening up global food trade especially for developing states. The objective is to show the significance of a regulatory framework that is as much as possible devoid of any loopholes or shortcomings, which could frustrate the developmental interests. Inappropriate accommodation of developmental interests in the SPS Agreement could have adverse impacts on the development prospectus of developing countries. , Thesis (LLM) -- Faculty of Law, 2013
- Full Text:
- Date Issued: 2013
- Authors: Nyatsanza, Sharon
- Date: 2013
- Subjects: World Trade Organization , Food contamination , Food handling -- Safety measures
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/27413 , vital:67294
- Description: Food safety and consumer protection has been a major concern of regulators since the 12th century. Sanitary and Phytosanitary (SPS) measures were therefore introduced to protect human, animal and plant safety. With the expansion of international trade came the increase in the use of SPS measures. However these increases in the use of SPS measures were accompanied with their misuse for protectionist purposes. SPS measures which had been created for legitimate purposes quickly became significant barriers to trade. The World Trade Organisation (WTO) adopted the WTO Agreement on Sanitary and Phytosanitary Measures (SPS Agreement) as a mechanism to regulate the use of SPS measures and avoid their potential use as protectionist tools. Trade liberalization and market access has been a primary aim of the WTO, therefore in principle the SPS Agreement is supposed to open up global food trade for all countries.Apart from opening up global food trade, another purpose of the SPS Agreement was to protect the developing countries, accommodate their special needs and in turn promote their economic development. Developing countries are heavily dependent on global food trade for their economic development. However developing states can only benefit from global food trade if they comply with SPS standards set in the importing countries. Considering their reliance on the agro – food sector the economic development of developing states is heavily reliant on the successful implementation of the SPS Agreement. According the SPS Agreement must avoid the use of illegitimate SPS measures and promote market access. It is therefore crucial that the SPS Agreement be analysed to determine whether its text, application and or interpretation satisfies the objective of opening up global food trade especially for developing states. The objective is to show the significance of a regulatory framework that is as much as possible devoid of any loopholes or shortcomings, which could frustrate the developmental interests. Inappropriate accommodation of developmental interests in the SPS Agreement could have adverse impacts on the development prospectus of developing countries. , Thesis (LLM) -- Faculty of Law, 2013
- Full Text:
- Date Issued: 2013
Application of catalysts and nanomaterials in the design of an electrochemical sensor for ochratoxin A
- Authors: Flanagan, Shane Patrick
- Date: 2011 , 2010-12-06
- Subjects: Ochratoxins , Filamentous fungi , Electrochemical sensors , Nanostructured materials , Catalysts , Food contamination
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4121 , http://hdl.handle.net/10962/d1013328
- Description: Ochratoxin A is the most potent chlorinated derivative of the ochratoxin group, consisting of a 5'-chlorinated dihydroisocoumarin moiety linked by an amide bond to l-phenylalanine. Produced as a secondary fungal metabolite by several species of Aspergillus and Penicillium, ochratoxin A has been shown to readily contaminate a large variety of commodities including cereals, groundnuts, dried fruit, spices and coffee. This has led to widespread contamination of ochratoxin in wine, beer, milk and meat products. As ochratoxin A is a potent nephrotoxin exhibiting teratogenic and carcinogenic properties, the development of a rapid screening platform for the cost effective control of ochratoxin A content in foodstuffs is therefore required. The evaluation of metallophthalocyanine and carbon nanotube electrode modification toward the development of a nanostructured biosensor capable of enhancing the electrochemical detection of ochratoxin A in complex media is presented. Cyclic voltammetry at a glassy carbon electrode allowed for the optimization of detection parameters including pH and type of supporting electrolyte. Britton-Robinson buffer was found to be the most suitable supporting electrolyte in terms of sensitivity and reproducibility obtaining a LOD of 0.28 μM as determined by differential pulse voltammetry. Subsequent analysis determined the dependence of OTA oxidation on pH in acidic media which proceeds with the transfer of two electrons to form a quinone/hydroquinone couple shown to adsorb to the electrode surface. Passivation of the electrode through adsorption of oxidation products was shown to severely limit the detection of OTA upon successive detection cycles. Comparison of various metallophthalocyanine modifiers showed an increase in sensitivity toward the detection of OTA at phthalocyanine complexes with metal based redox processes. However with the exception of NiPc and CoTCPc complexes, phthalocyanine modification was limited by the increase in deviation of current response and extent of fouling. NiPc modification showed an increase in sensitivity by two fold with fouling characteristics comparable to an unmodified electrode while low improvements in fouling was observed at CoTCPc modified electrodes with sensitivity in detection comparable to an unmodified electrode.Modification of the electrode with multi- and single walled carbon nanotubes produced a significant increase in sensitivity toward the detection of ochratoxin A. The electrocatalytic activity of nanotube modifiers was attributed to the increase in surface area and to the addition of oxygenated functional groups upon acid treatment as confirmed by Raman spectroscopy. Acid functionalization of the carbon nanotubes for a period of two hours produced the greatest increase in sensitivity obtaining a respective LOD of 0.09 μM and 0.03 μM for analysis of ochratoxin A at multi- and single walled carbon nanotube modified electrodes. Centrifugal purification of carbon nanotubes was deemed necessary to improve the electrocatalytic activity of the nanotube modifiers through the removal of carbonaceous impurities as visualized by atomic force microscopy. Furthermore, a crude lipase preparation, lipase A, was investigated as a potential biological recognition element for selective detection of ochratoxin A in complex media. Lipase A enabled the hydrolysis of ochratoxin A to the electroactive species ochratoxin α as confirmed by thin layer chromatography and voltammetric analysis. Additional isolation of a pure hydrolase from the lipase A preparation is required prior to utilization within a nanostructured biosensor platform capable of detecting ochratoxin A in complex media.
- Full Text:
- Date Issued: 2011
- Authors: Flanagan, Shane Patrick
- Date: 2011 , 2010-12-06
- Subjects: Ochratoxins , Filamentous fungi , Electrochemical sensors , Nanostructured materials , Catalysts , Food contamination
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4121 , http://hdl.handle.net/10962/d1013328
- Description: Ochratoxin A is the most potent chlorinated derivative of the ochratoxin group, consisting of a 5'-chlorinated dihydroisocoumarin moiety linked by an amide bond to l-phenylalanine. Produced as a secondary fungal metabolite by several species of Aspergillus and Penicillium, ochratoxin A has been shown to readily contaminate a large variety of commodities including cereals, groundnuts, dried fruit, spices and coffee. This has led to widespread contamination of ochratoxin in wine, beer, milk and meat products. As ochratoxin A is a potent nephrotoxin exhibiting teratogenic and carcinogenic properties, the development of a rapid screening platform for the cost effective control of ochratoxin A content in foodstuffs is therefore required. The evaluation of metallophthalocyanine and carbon nanotube electrode modification toward the development of a nanostructured biosensor capable of enhancing the electrochemical detection of ochratoxin A in complex media is presented. Cyclic voltammetry at a glassy carbon electrode allowed for the optimization of detection parameters including pH and type of supporting electrolyte. Britton-Robinson buffer was found to be the most suitable supporting electrolyte in terms of sensitivity and reproducibility obtaining a LOD of 0.28 μM as determined by differential pulse voltammetry. Subsequent analysis determined the dependence of OTA oxidation on pH in acidic media which proceeds with the transfer of two electrons to form a quinone/hydroquinone couple shown to adsorb to the electrode surface. Passivation of the electrode through adsorption of oxidation products was shown to severely limit the detection of OTA upon successive detection cycles. Comparison of various metallophthalocyanine modifiers showed an increase in sensitivity toward the detection of OTA at phthalocyanine complexes with metal based redox processes. However with the exception of NiPc and CoTCPc complexes, phthalocyanine modification was limited by the increase in deviation of current response and extent of fouling. NiPc modification showed an increase in sensitivity by two fold with fouling characteristics comparable to an unmodified electrode while low improvements in fouling was observed at CoTCPc modified electrodes with sensitivity in detection comparable to an unmodified electrode.Modification of the electrode with multi- and single walled carbon nanotubes produced a significant increase in sensitivity toward the detection of ochratoxin A. The electrocatalytic activity of nanotube modifiers was attributed to the increase in surface area and to the addition of oxygenated functional groups upon acid treatment as confirmed by Raman spectroscopy. Acid functionalization of the carbon nanotubes for a period of two hours produced the greatest increase in sensitivity obtaining a respective LOD of 0.09 μM and 0.03 μM for analysis of ochratoxin A at multi- and single walled carbon nanotube modified electrodes. Centrifugal purification of carbon nanotubes was deemed necessary to improve the electrocatalytic activity of the nanotube modifiers through the removal of carbonaceous impurities as visualized by atomic force microscopy. Furthermore, a crude lipase preparation, lipase A, was investigated as a potential biological recognition element for selective detection of ochratoxin A in complex media. Lipase A enabled the hydrolysis of ochratoxin A to the electroactive species ochratoxin α as confirmed by thin layer chromatography and voltammetric analysis. Additional isolation of a pure hydrolase from the lipase A preparation is required prior to utilization within a nanostructured biosensor platform capable of detecting ochratoxin A in complex media.
- Full Text:
- Date Issued: 2011
Solid-phase extraction based sample preparation for the determination of drug and organic pollutant residue
- Authors: Pule, Bellah Oreeditse
- Date: 2011 , 2011-02-08
- Subjects: Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4406 , http://hdl.handle.net/10962/d1006711 , Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Description: This thesis presents solid phase extraction (SPE) methodologies based on mixed-mode polymeric sorbents; a mixed mode strong anion exchanger (Agilent SampliQ SAX) and a mixed mode strong cation exchanger (Agilent SampliQ SCX). Furthermore, dispersive-SPE based on a quick, easy, cheap, effective, rugged and safe (QuEChERS) method was assessed for applicability in the determination of drug residues. The mixed-mode polymeric sorbents were evaluated for the simultaneous fractionation of drugs that exhibit diverse polarities with acidic, basic and neutral functionalities in biological matrices (plasma and urine). The polymeric skeleton of these sorbents entails an exchanger group and therefore provides two retention mechanisms, strong cation or anion exchange retention mechanisms with hydrophobic interactions. It was demonstrated that with a sequential elution protocol for sample clean-up analytes were fractionated into acidic, basic and neutral classes. The SAX was employed for analysis of ketoprofen, naproxen (acidic drugs), nortriptyline (basic) and secobarbital (neutral) from urine sample. The SCX was used for fractionating phenobarbital, p-toluamide (acidic), amphetamine, m-toluidine (basic) and acetaminophen (neutral drug) from plasma sample. QuEChERS method was employed for quantitative determination of 16 polycyclic aromatic hydrocarbons (PAHs) from fish fillets and soil; 9 sulfonamides (SAs) from chicken muscles and acrylamide (AA) in cooking oil. The analyte recoveries ranged from 79.6 - 109% with RSDs ranging from 0.06 - 1.9% at three different fortification levels. Good linearity (r2 > 0.9990) was attained for most analytes. The limits of detection and quantification ranged from 0.03 - 0.84 μg/ml and 0.81 - 1.89 μg/ml respectively for analytes in biological samples. LODs and LOQs for analytes in food and environmental samples ranged from 0.02 to 0.39 and 0.25 to 1.30 ng/g respectively.
- Full Text:
- Date Issued: 2011
- Authors: Pule, Bellah Oreeditse
- Date: 2011 , 2011-02-08
- Subjects: Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4406 , http://hdl.handle.net/10962/d1006711 , Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Description: This thesis presents solid phase extraction (SPE) methodologies based on mixed-mode polymeric sorbents; a mixed mode strong anion exchanger (Agilent SampliQ SAX) and a mixed mode strong cation exchanger (Agilent SampliQ SCX). Furthermore, dispersive-SPE based on a quick, easy, cheap, effective, rugged and safe (QuEChERS) method was assessed for applicability in the determination of drug residues. The mixed-mode polymeric sorbents were evaluated for the simultaneous fractionation of drugs that exhibit diverse polarities with acidic, basic and neutral functionalities in biological matrices (plasma and urine). The polymeric skeleton of these sorbents entails an exchanger group and therefore provides two retention mechanisms, strong cation or anion exchange retention mechanisms with hydrophobic interactions. It was demonstrated that with a sequential elution protocol for sample clean-up analytes were fractionated into acidic, basic and neutral classes. The SAX was employed for analysis of ketoprofen, naproxen (acidic drugs), nortriptyline (basic) and secobarbital (neutral) from urine sample. The SCX was used for fractionating phenobarbital, p-toluamide (acidic), amphetamine, m-toluidine (basic) and acetaminophen (neutral drug) from plasma sample. QuEChERS method was employed for quantitative determination of 16 polycyclic aromatic hydrocarbons (PAHs) from fish fillets and soil; 9 sulfonamides (SAs) from chicken muscles and acrylamide (AA) in cooking oil. The analyte recoveries ranged from 79.6 - 109% with RSDs ranging from 0.06 - 1.9% at three different fortification levels. Good linearity (r2 > 0.9990) was attained for most analytes. The limits of detection and quantification ranged from 0.03 - 0.84 μg/ml and 0.81 - 1.89 μg/ml respectively for analytes in biological samples. LODs and LOQs for analytes in food and environmental samples ranged from 0.02 to 0.39 and 0.25 to 1.30 ng/g respectively.
- Full Text:
- Date Issued: 2011
- «
- ‹
- 1
- ›
- »