Formulation and evaluation of captopril loaded polymethacrylate and hydroxypropyl methycellulose microcapsules
- Khamanga, Sandile Maswazi Malungelo
- Authors: Khamanga, Sandile Maswazi Malungelo
- Date: 2010
- Subjects: Hypertension -- Treatment , Hypertension -- Chemotherapy , Angiotensin converting enzyme -- Inhibitors , Hypotensive agents -- Development , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3860 , http://hdl.handle.net/10962/d1013443
- Description: Angiotensin-converting enzyme (ACE) inhibitors are some of the most commonly prescribed medications for hypertension. They are cited in many papers as the treatment most often recommended by guidelines and favoured over other antihypertensive drugs as first-line agents especially when other high-risk conditions are present, such as diabetic nephropathy. The development of captopril (CPT) was amongst the earliest successes of the revolutionary concept of structure-based drug design. Due to its relatively poor pharmacokinetic profile or short half-life of about 1 hour, the formulation of sustained-release microcapsule dosage form is useful to improve patient compliance and to achieve predictable and optimized therapeutic plasma concentrations. Currently, CPT is mainly administered in tablet form. One of the difficulties of CPT formulation has been reported to be its instability in aqueous solutions. CPT is characterized by a lack of a strong chromophore and, therefore, not able to absorb at the more useful UV–Vis region of the spectrum. For this reason, an accurate, simple, reproducible, and sensitive HPLC-ECD method was developed and validated for the determination of CPT in dosage forms. The method was successfully applied for the determination of CPT in commercial and developed formulations. Possible drug-excipient and excipient-excipient interactions were investigated prior to formulating CPT microcapsules because successful formulation of a stable and effective solid dosage form depends on careful selection of excipients. Nuclear magnetic resonance spectroscopy, Fourier transform infra-red spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used for the identification and purity testing of CPT and excipients. The studies revealed no thermal changes during stress testing of binary and whole mixtures which indicate absence of solid state interactions. There were no shifts, appearance and disappearance in the endothermic or exothermic peaks and on the change of other associated enthalpy values on thermal curves obtained with DSC method. Characteristic peaks for common functional groups in the FT-IR were present in all the mixtures indicating the absence of incompatibility. The techniques used in this study can be said to have been efficient in the characterization and evaluation of the drug and excipients. The technique of microencapsulation by oil-in-oil was used to prepare CPT microcapsules. The effects of polymer molecular weight, homogenizing speed on the particle size, flow properties, morphology, surface properties and release characteristics of the prepared CPT microcapsules were examined. In order to decrease the complexity of the analysis and reduce cost response surface methodology using best polynomial equations was successfully used to quantify the effect of the formulation variables and develop an optimized formulation thereby minimizing the number of experimental trials. There was a burst effect during the first stage of dissolution. Scanning electron microscopy (SEM) results indicated that the initial burst effect observed in drug release could be attributed to dissolution of CPT crystals present at the surface or embedded in the superficial layer of the matrix. During the preparation of microcapsules, the drug might have been trapped near the surface of the microcapsules and or might have diffused quickly through the porous surface. The release kinetics of CPT from most formulations followed Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores at the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed predominance of diffusion relative to swelling or erosion throughout the entire test period. Drug release mechanism was also confirmed by Makoid-Banakar and Korsmeyer-Peppas models exponents which further support diffusion release mechanism in most formulations. The models postulate that the total of drug release is a summation of a couple of mechanisms; burst release, relaxation induced controlled-release and diffusional release. Inspection of the 2D contour and 3D response surfaces allowed the determination of the geometrical nature of the surfaces and further providing results about the interaction of the different variables used in central composite design (CCD). The wide variation indicated that the factor combinations resulted in different drug release rates. Lagrange, canonical and mathematical modelling were used to determine the nature of the stationery point of the models. This represented the optimal variables or stationery points where there is interaction in the experimental space. It is difficult to understand the shape of a fitted response by mere inspection of the algebraic polynomial when there are many independent variables in the model. Canonical and Lagrange analyses facilitated the interpretation of the surface plots after a mathematical transformation of the original variables into new variables. In conclusion, these results suggest the potential application of Eudragit® / Methocel® microcapsules as suitable sustained-release drug delivery system for CPT.
- Full Text:
- Authors: Khamanga, Sandile Maswazi Malungelo
- Date: 2010
- Subjects: Hypertension -- Treatment , Hypertension -- Chemotherapy , Angiotensin converting enzyme -- Inhibitors , Hypotensive agents -- Development , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3860 , http://hdl.handle.net/10962/d1013443
- Description: Angiotensin-converting enzyme (ACE) inhibitors are some of the most commonly prescribed medications for hypertension. They are cited in many papers as the treatment most often recommended by guidelines and favoured over other antihypertensive drugs as first-line agents especially when other high-risk conditions are present, such as diabetic nephropathy. The development of captopril (CPT) was amongst the earliest successes of the revolutionary concept of structure-based drug design. Due to its relatively poor pharmacokinetic profile or short half-life of about 1 hour, the formulation of sustained-release microcapsule dosage form is useful to improve patient compliance and to achieve predictable and optimized therapeutic plasma concentrations. Currently, CPT is mainly administered in tablet form. One of the difficulties of CPT formulation has been reported to be its instability in aqueous solutions. CPT is characterized by a lack of a strong chromophore and, therefore, not able to absorb at the more useful UV–Vis region of the spectrum. For this reason, an accurate, simple, reproducible, and sensitive HPLC-ECD method was developed and validated for the determination of CPT in dosage forms. The method was successfully applied for the determination of CPT in commercial and developed formulations. Possible drug-excipient and excipient-excipient interactions were investigated prior to formulating CPT microcapsules because successful formulation of a stable and effective solid dosage form depends on careful selection of excipients. Nuclear magnetic resonance spectroscopy, Fourier transform infra-red spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used for the identification and purity testing of CPT and excipients. The studies revealed no thermal changes during stress testing of binary and whole mixtures which indicate absence of solid state interactions. There were no shifts, appearance and disappearance in the endothermic or exothermic peaks and on the change of other associated enthalpy values on thermal curves obtained with DSC method. Characteristic peaks for common functional groups in the FT-IR were present in all the mixtures indicating the absence of incompatibility. The techniques used in this study can be said to have been efficient in the characterization and evaluation of the drug and excipients. The technique of microencapsulation by oil-in-oil was used to prepare CPT microcapsules. The effects of polymer molecular weight, homogenizing speed on the particle size, flow properties, morphology, surface properties and release characteristics of the prepared CPT microcapsules were examined. In order to decrease the complexity of the analysis and reduce cost response surface methodology using best polynomial equations was successfully used to quantify the effect of the formulation variables and develop an optimized formulation thereby minimizing the number of experimental trials. There was a burst effect during the first stage of dissolution. Scanning electron microscopy (SEM) results indicated that the initial burst effect observed in drug release could be attributed to dissolution of CPT crystals present at the surface or embedded in the superficial layer of the matrix. During the preparation of microcapsules, the drug might have been trapped near the surface of the microcapsules and or might have diffused quickly through the porous surface. The release kinetics of CPT from most formulations followed Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores at the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed predominance of diffusion relative to swelling or erosion throughout the entire test period. Drug release mechanism was also confirmed by Makoid-Banakar and Korsmeyer-Peppas models exponents which further support diffusion release mechanism in most formulations. The models postulate that the total of drug release is a summation of a couple of mechanisms; burst release, relaxation induced controlled-release and diffusional release. Inspection of the 2D contour and 3D response surfaces allowed the determination of the geometrical nature of the surfaces and further providing results about the interaction of the different variables used in central composite design (CCD). The wide variation indicated that the factor combinations resulted in different drug release rates. Lagrange, canonical and mathematical modelling were used to determine the nature of the stationery point of the models. This represented the optimal variables or stationery points where there is interaction in the experimental space. It is difficult to understand the shape of a fitted response by mere inspection of the algebraic polynomial when there are many independent variables in the model. Canonical and Lagrange analyses facilitated the interpretation of the surface plots after a mathematical transformation of the original variables into new variables. In conclusion, these results suggest the potential application of Eudragit® / Methocel® microcapsules as suitable sustained-release drug delivery system for CPT.
- Full Text:
Investigations of the bioavailability/bioequivalence of topical corticosteroid formulations containing clobetasol propionate using the human skin blanching assay, tape stripping and microdialysis
- Authors: Au, Wai Ling
- Date: 2010
- Subjects: Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3743 , http://hdl.handle.net/10962/d1003221 , Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Description: Currently, clinical trials in patients are required by most regulatory authorities for the assessment of bioequivalence of topical products where the drug is not intended for systemic absorption. Hence there is a dire need for suitable methods for the assessment of bioavailability and bioequivalence of such products since clinical safety and efficacy studies are expensive, time-consuming and require very large numbers of patients. Except for topical corticosteroid products where the human skin blanching assay/vasoconstrictor assay has been approved by the US FDA for bioequivalence assessment of those products, no other method has been “officially” approved for use in those investigations. However, a few alternative methods such as tape stripping and microdialysis have been pursued and considered to have the potential for use in ioequivalence/bioavailability studies. The human skin blanching assay was used to assess the bioequivalence of commercially available topical products containing 0.05% clobetasol propionate. Both visual and chromameter data were obtained and a commercially available topical corticosteroid product, Dermovate® cream was used as both the “Test” and the “Reference” product. The results indicated that both visual and chromametric assessments were comparable to each other and that either could be used for the assessment of the bioequivalence of topical products containing clobetasol propionate. The screening procedure was optimized to identify potential “detectors” for inclusion in the bioequivalence studies. This resulted in fewer subjects being required in a bioequivalence pivotal study, still having the necessary power to confirm bioequivalence using the human skin blanching assay. Another objective of this research was to re-visit tape stripping and other possible alternative methods such as dermal microdialysis and to optimize these procedures for bioequivalence assessment of topical formulations where the drug is not intended for systemic absorption. In the past few decades, tape stripping has been used to investigate bioavailability/bioequivalence of various topical formulations. This technique involves the removal of the stratum corneum to assess drug penetration through the skin. A draft FDA guidance for tape stripping was initially published but was subsequently withdrawn due to high variability and poor reproducibility. This research project used an optimized tape stripping procedure to determine bioavailability and establish bioequivalence between three commercially available formulations containing 0.05 % m/m clobetasol propionate. Furthermore, tape stripping was validated by undertaking a study to assess the bioequivalence of a 0.05% topical cream formulation (Dermovate® cream) using the same cream as both the “Test” and “Reference” product, in which bioequivalence was confirmed. The findings highlight the potential of tape stripping as an alternative method for the assessment of bioequivalence of clobetasol propionate formulations and may possibly be extended for use in other topical products. Microdialysis is another useful technique that can assess the penetration of topically applied substances which diffuses through the stratum corneum and into the dermis. Microdialysis has previously been successfully used for in vivo bioavailability and bioequivalence assessments of topical formulations. However, the drugs which were under investigation were all hydrophilic in nature. A major problem with the use of microdialysis for the assessment of lipophilic substances is the binding/adherence of the substance to the membrane and other components of the microdialysis system. As a result, this necessitates the development of a microdialysis system which can be used to assess lipophilic drugs. Intralipid® 20% was investigated and successfully utilized as a perfusate to recover a lipophilic topical corticosteroid, clobetasol propionate, in microdialysis studies. Hence, the bioavailability of clobetasol propionate from an extemporaneous preparation was determined in healthy human volunteers using microdialysis. These findings indicate that in vivo microdialysis can be used to assess lipophilic drug penetration through the skin. A novel approach to investigate drug release from topical formulations containing 0.05% clobetasol propionate using in vitro microdialysis was also undertaken. The in vitro findings were found to be in agreement with the results obtained using tape stripping to assess bioequivalence of the same commercially available products, namely Dermovate® cream, Dovate® Cream and Dermovate® ointment. These results indicate the potential to correlate in vitro with in vivo data for bioequivalence assessment of such topical dosage forms.
- Full Text:
- Authors: Au, Wai Ling
- Date: 2010
- Subjects: Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3743 , http://hdl.handle.net/10962/d1003221 , Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Description: Currently, clinical trials in patients are required by most regulatory authorities for the assessment of bioequivalence of topical products where the drug is not intended for systemic absorption. Hence there is a dire need for suitable methods for the assessment of bioavailability and bioequivalence of such products since clinical safety and efficacy studies are expensive, time-consuming and require very large numbers of patients. Except for topical corticosteroid products where the human skin blanching assay/vasoconstrictor assay has been approved by the US FDA for bioequivalence assessment of those products, no other method has been “officially” approved for use in those investigations. However, a few alternative methods such as tape stripping and microdialysis have been pursued and considered to have the potential for use in ioequivalence/bioavailability studies. The human skin blanching assay was used to assess the bioequivalence of commercially available topical products containing 0.05% clobetasol propionate. Both visual and chromameter data were obtained and a commercially available topical corticosteroid product, Dermovate® cream was used as both the “Test” and the “Reference” product. The results indicated that both visual and chromametric assessments were comparable to each other and that either could be used for the assessment of the bioequivalence of topical products containing clobetasol propionate. The screening procedure was optimized to identify potential “detectors” for inclusion in the bioequivalence studies. This resulted in fewer subjects being required in a bioequivalence pivotal study, still having the necessary power to confirm bioequivalence using the human skin blanching assay. Another objective of this research was to re-visit tape stripping and other possible alternative methods such as dermal microdialysis and to optimize these procedures for bioequivalence assessment of topical formulations where the drug is not intended for systemic absorption. In the past few decades, tape stripping has been used to investigate bioavailability/bioequivalence of various topical formulations. This technique involves the removal of the stratum corneum to assess drug penetration through the skin. A draft FDA guidance for tape stripping was initially published but was subsequently withdrawn due to high variability and poor reproducibility. This research project used an optimized tape stripping procedure to determine bioavailability and establish bioequivalence between three commercially available formulations containing 0.05 % m/m clobetasol propionate. Furthermore, tape stripping was validated by undertaking a study to assess the bioequivalence of a 0.05% topical cream formulation (Dermovate® cream) using the same cream as both the “Test” and “Reference” product, in which bioequivalence was confirmed. The findings highlight the potential of tape stripping as an alternative method for the assessment of bioequivalence of clobetasol propionate formulations and may possibly be extended for use in other topical products. Microdialysis is another useful technique that can assess the penetration of topically applied substances which diffuses through the stratum corneum and into the dermis. Microdialysis has previously been successfully used for in vivo bioavailability and bioequivalence assessments of topical formulations. However, the drugs which were under investigation were all hydrophilic in nature. A major problem with the use of microdialysis for the assessment of lipophilic substances is the binding/adherence of the substance to the membrane and other components of the microdialysis system. As a result, this necessitates the development of a microdialysis system which can be used to assess lipophilic drugs. Intralipid® 20% was investigated and successfully utilized as a perfusate to recover a lipophilic topical corticosteroid, clobetasol propionate, in microdialysis studies. Hence, the bioavailability of clobetasol propionate from an extemporaneous preparation was determined in healthy human volunteers using microdialysis. These findings indicate that in vivo microdialysis can be used to assess lipophilic drug penetration through the skin. A novel approach to investigate drug release from topical formulations containing 0.05% clobetasol propionate using in vitro microdialysis was also undertaken. The in vitro findings were found to be in agreement with the results obtained using tape stripping to assess bioequivalence of the same commercially available products, namely Dermovate® cream, Dovate® Cream and Dermovate® ointment. These results indicate the potential to correlate in vitro with in vivo data for bioequivalence assessment of such topical dosage forms.
- Full Text:
- «
- ‹
- 1
- ›
- »