Preparation, characterization and optimization of carbamazepine based pellets prepared by extrusion-spheronization technique
- Authors: Makoni, Kudzai Gabriella
- Date: 2020-04
- Subjects: Carbamazepine , Pharmacokinetics , Anticonvulsants , Drugs -- Controlled release , Drugs -- Dosage forms , Tablets (Medicine) , Drugs -- Administration , High performance liquid chromatography , International Conference on Harmonisation , Experimental design
- Language: English
- Type: Thesis , Masters , MSc (Pharmacy)
- Identifier: http://hdl.handle.net/10962/140478 , vital:37893
- Description: Carbamazepine (CBZ) is an oral antiepileptic drug (AED) that is prescribed as a first-line treatment for partial seizures. CBZ is a class II compound according to the Biopharmaceutical Classification System (BCS), hence it exhibits low aqueous solubility and high gastrointestinal tract (GIT) permeability...
- Full Text:
- Authors: Makoni, Kudzai Gabriella
- Date: 2020-04
- Subjects: Carbamazepine , Pharmacokinetics , Anticonvulsants , Drugs -- Controlled release , Drugs -- Dosage forms , Tablets (Medicine) , Drugs -- Administration , High performance liquid chromatography , International Conference on Harmonisation , Experimental design
- Language: English
- Type: Thesis , Masters , MSc (Pharmacy)
- Identifier: http://hdl.handle.net/10962/140478 , vital:37893
- Description: Carbamazepine (CBZ) is an oral antiepileptic drug (AED) that is prescribed as a first-line treatment for partial seizures. CBZ is a class II compound according to the Biopharmaceutical Classification System (BCS), hence it exhibits low aqueous solubility and high gastrointestinal tract (GIT) permeability...
- Full Text:
Development and assessment of minocycline sustained release capsule formulations
- Sachikonye, Tinotenda Chipo Victoria
- Authors: Sachikonye, Tinotenda Chipo Victoria
- Date: 2010
- Subjects: Drugs -- Controlled release , Drugs -- Dosage forms , Capsules (Pharmacy) , Drugs -- Administration , Acne -- Treatment , Tetracyclines , Antibiotics -- Side effects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3854 , http://hdl.handle.net/10962/d1013127
- Description: The use of minocycline for the treatment of a broad range of systemic infections and for severe acne has been associated with vestibular side effects. The severity of side effects may lead to poor adherence to therapy by patients. The use of sustained release formulations of minocycline that display slow dissolution of minocycline following administration may be beneficial in reducing the incidence and severity of side effects. Therefore, sustained release capsule dosage forms containing 100 mg minocycline (base) were manufactured and assessed for use as sustained release oral dosage forms of minocycline. Minocycline sustained release capsules were manufactured based on matrix technologies using hydroxypropylmethyl cellulose (HPMC) and Compritol® as release retarding polymers. The rate and extent of minocycline release from the capsules was evaluated using USP Apparatus 1 and samples were analysed using a validated High Performance Liquid Chromatographic (HPLC) method with ultraviolet (UV) detection. Differences in the rate and extent of minocycline release from formulations manufactured using HPMC or Compritol® were influenced by the concentration of polymer used in the formulations. The rate and extent of minocycline release was faster and greater when low concentrations of polymer were used in formulations. The effect of different excipients on the release pattern(s) of minocycline and particularly their potential to optimise minocycline release from experimental formulations was investigated. The use of diluents such as lactose and microcrystalline cellulose (MCC) revealed that lactose facilitated minocycline release when HPMC was used as the polymer matrix. In contrast, the use of lactose as diluent resulted in slower release of minocycline from Compritol® based formulations. The addition of sodium starch glycolate to HPMC based formulations resulted in slower release of minocycline than when no sodium starch glycolate was used. Compritol® based formulations were observed to release minocycline faster following addition of sodium starch glycolate and Poloxamer 188 to experimental formulations. In vitro dissolution profiles were compared to a target or reference profile using the difference and similarity factors, ƒ1 and ƒ2 , and a one way analysis of variance (ANOVA). In addition, the mechanism of minocycline release was elucidated following fitting of dissolution data to the Korsmeyer-Peppas, Higuchi and Zero order models. Minocycline release kinetics were best described by the Korsmeyer-Peppas model and the values of the release exponent, n (italics), revealed that drug release was a result of the combined effects of minocycline diffusion through matrices and erosion of the matrices. These in vitro dissolution profiles were better fit to the Higuchi model than to the Zero order model. Two formulations that displayed a fit to the Zero order model were identified for further studies as potential dosage forms for sustained release minocycline.
- Full Text:
- Authors: Sachikonye, Tinotenda Chipo Victoria
- Date: 2010
- Subjects: Drugs -- Controlled release , Drugs -- Dosage forms , Capsules (Pharmacy) , Drugs -- Administration , Acne -- Treatment , Tetracyclines , Antibiotics -- Side effects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3854 , http://hdl.handle.net/10962/d1013127
- Description: The use of minocycline for the treatment of a broad range of systemic infections and for severe acne has been associated with vestibular side effects. The severity of side effects may lead to poor adherence to therapy by patients. The use of sustained release formulations of minocycline that display slow dissolution of minocycline following administration may be beneficial in reducing the incidence and severity of side effects. Therefore, sustained release capsule dosage forms containing 100 mg minocycline (base) were manufactured and assessed for use as sustained release oral dosage forms of minocycline. Minocycline sustained release capsules were manufactured based on matrix technologies using hydroxypropylmethyl cellulose (HPMC) and Compritol® as release retarding polymers. The rate and extent of minocycline release from the capsules was evaluated using USP Apparatus 1 and samples were analysed using a validated High Performance Liquid Chromatographic (HPLC) method with ultraviolet (UV) detection. Differences in the rate and extent of minocycline release from formulations manufactured using HPMC or Compritol® were influenced by the concentration of polymer used in the formulations. The rate and extent of minocycline release was faster and greater when low concentrations of polymer were used in formulations. The effect of different excipients on the release pattern(s) of minocycline and particularly their potential to optimise minocycline release from experimental formulations was investigated. The use of diluents such as lactose and microcrystalline cellulose (MCC) revealed that lactose facilitated minocycline release when HPMC was used as the polymer matrix. In contrast, the use of lactose as diluent resulted in slower release of minocycline from Compritol® based formulations. The addition of sodium starch glycolate to HPMC based formulations resulted in slower release of minocycline than when no sodium starch glycolate was used. Compritol® based formulations were observed to release minocycline faster following addition of sodium starch glycolate and Poloxamer 188 to experimental formulations. In vitro dissolution profiles were compared to a target or reference profile using the difference and similarity factors, ƒ1 and ƒ2 , and a one way analysis of variance (ANOVA). In addition, the mechanism of minocycline release was elucidated following fitting of dissolution data to the Korsmeyer-Peppas, Higuchi and Zero order models. Minocycline release kinetics were best described by the Korsmeyer-Peppas model and the values of the release exponent, n (italics), revealed that drug release was a result of the combined effects of minocycline diffusion through matrices and erosion of the matrices. These in vitro dissolution profiles were better fit to the Higuchi model than to the Zero order model. Two formulations that displayed a fit to the Zero order model were identified for further studies as potential dosage forms for sustained release minocycline.
- Full Text:
Formulation and assessment of monolithic beta blocker sustained release tablets prepared by direct compression
- Authors: Kieser, Leith Faye
- Date: 2002
- Subjects: Drugs -- Dosage forms , Drugs -- Administration , Pharmacology, Experimental , Adrenergic beta blockers , Tablets (Medicine) , Tableting , Neuropharmacology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3764 , http://hdl.handle.net/10962/d1003242 , Drugs -- Dosage forms , Drugs -- Administration , Pharmacology, Experimental , Adrenergic beta blockers , Tablets (Medicine) , Tableting , Neuropharmacology
- Description: Beta blockers are commonly prescribed for the chronic treatment of hypertension, one of the most prolific disease states worldwide. The beta blockers selected for this study include acebutolol hydrochloride, labetalol hydrochloride, metoprolol tartrate oxprenolol hydrochloride and propranolol hydrochloride. All of these compounds have a short elimination half-life, necessitating multiple dose per day regimens and therefore the development of sustained release dosage forms incorporating these agents was considered beneficial in terms of extending the dosing interval, with the aim of improving patient compliance and subsequent therapeutic outcomes. Preformulation studies that were conducted included moisture content analysis by Karl Fischer titration, and DSC, a method used to predict potential interactions between the drugs and tablet excipients. Tablets were manufactured by both wet granulation and direct compression techniques, and the resultant drug release characteristics were evaluated using the USP Apparatus 3(BIO.DIS). A validated isocratic HPLC method, capable of separating the five drug candidates simultaneously, was developed and used for the analysis of drug samples. Tablet quality was assessed using analyses that included the physical assessment of weight, diameter, thickness, hardness and friability, as well as content uniformity of tablets, before and after dissolution testing. Direct compression tablet formulations containing each of the five beta blockers were successfully adapted from a prototype wet granulation matrix tablet containing metoprolol tartrate, and various formulation variables were investigated to establish,their effect on the rate and extent of drug release from these tablets. The grade and quantity of ethylcellulose used in the wet granulation and direct compression formulae influenced the release rate of some drug candidates. In addition, an alternative formulation method, involving freeze-drying of the drug with an ethylcellulose dispersion, was shown to have potential for altering release rates further. Anti-frictional agents, talc and colloidal silicon dioxide, did not affect drug release from these matrices,however, they affected the physical character:istics such as tablet weight and thickness, of the resultant tablets. All of the matrix tablets formulated were shown to release drug according to square root of time kinetics, in a sustained manner over a 22 hour period.
- Full Text:
- Authors: Kieser, Leith Faye
- Date: 2002
- Subjects: Drugs -- Dosage forms , Drugs -- Administration , Pharmacology, Experimental , Adrenergic beta blockers , Tablets (Medicine) , Tableting , Neuropharmacology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3764 , http://hdl.handle.net/10962/d1003242 , Drugs -- Dosage forms , Drugs -- Administration , Pharmacology, Experimental , Adrenergic beta blockers , Tablets (Medicine) , Tableting , Neuropharmacology
- Description: Beta blockers are commonly prescribed for the chronic treatment of hypertension, one of the most prolific disease states worldwide. The beta blockers selected for this study include acebutolol hydrochloride, labetalol hydrochloride, metoprolol tartrate oxprenolol hydrochloride and propranolol hydrochloride. All of these compounds have a short elimination half-life, necessitating multiple dose per day regimens and therefore the development of sustained release dosage forms incorporating these agents was considered beneficial in terms of extending the dosing interval, with the aim of improving patient compliance and subsequent therapeutic outcomes. Preformulation studies that were conducted included moisture content analysis by Karl Fischer titration, and DSC, a method used to predict potential interactions between the drugs and tablet excipients. Tablets were manufactured by both wet granulation and direct compression techniques, and the resultant drug release characteristics were evaluated using the USP Apparatus 3(BIO.DIS). A validated isocratic HPLC method, capable of separating the five drug candidates simultaneously, was developed and used for the analysis of drug samples. Tablet quality was assessed using analyses that included the physical assessment of weight, diameter, thickness, hardness and friability, as well as content uniformity of tablets, before and after dissolution testing. Direct compression tablet formulations containing each of the five beta blockers were successfully adapted from a prototype wet granulation matrix tablet containing metoprolol tartrate, and various formulation variables were investigated to establish,their effect on the rate and extent of drug release from these tablets. The grade and quantity of ethylcellulose used in the wet granulation and direct compression formulae influenced the release rate of some drug candidates. In addition, an alternative formulation method, involving freeze-drying of the drug with an ethylcellulose dispersion, was shown to have potential for altering release rates further. Anti-frictional agents, talc and colloidal silicon dioxide, did not affect drug release from these matrices,however, they affected the physical character:istics such as tablet weight and thickness, of the resultant tablets. All of the matrix tablets formulated were shown to release drug according to square root of time kinetics, in a sustained manner over a 22 hour period.
- Full Text:
Design, development and evaluation of encapsulated oral controlled release theophylline mini-tablets
- Authors: Munday, Dale Leslie
- Date: 1991
- Subjects: Drugs -- Administration , Drugs -- Bioavailability , Drugs -- Controlled release , Drugs -- Dosage forms , Tablets (Medicine) , Biopharmaceutics , Drugs -- Testing
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3777 , http://hdl.handle.net/10962/d1003255 , Drugs -- Administration , Drugs -- Bioavailability , Drugs -- Controlled release , Drugs -- Dosage forms , Tablets (Medicine) , Biopharmaceutics , Drugs -- Testing
- Description: Conventional solid dosage forms often lead to fluctuations which exceed the maximum safe therapeutic level and/or decline below the minimum effective level. It is recognised that many drugs for chronic administration should be administered on a schedule that maintains plasma drug concentration within the therapeutic window. Research in controlled release dosage forms aims at designing a system with a zero-order input (eg, ideally to deliver 8.33% of the dose per hour over a 12 hour duration), producing steady state plasma drug levels. Oral dministration of drugs prepared as a controlled release formulation is extremely popular, and has attracted the attention of pharmaceutical scientists during the last decade. This has been due to the simultaneous convergence of various factors (eg, discovery of novel polymers and devices, better understanding of formulation and physiological constraints, expiration of existing patents, prohibitive cost of developing new drug entities), involved in the development of these delivery systems. Controlled release oral products can be formulated as single or multiple unit dosage forms and the relative merits of multiple unit forms with their own rate controlling systems are well established. This work describes the development of a relatively inexpensive multiple-unit capsule dosage form of theophylline containing coated mini-tablets for drug delivery throughout the gastrointestinal tract. Preformulation studies on theophylline anhydrous included solubility and dissolution rate determinations. Techniques including X-ray powder diffraction, differential scanning colorimetry and infrared spectroscopy provided no evidence of true polymorphism after recrystallisation from various solvents. However, scanning electron micrographs showed the effects of solvent polarity and cooling rate on the size and shape of recrystallised particles. Theophylline granules were manufactured by using various binders and were film coated by fluidised bed technology with various proportions of ethylcellulose, containing varying amounts of PEG 1540. In vitro release rates were dependent upon coating thickness and the proportion of PEG, which, being water soluble, created pores in the coating during dissolution studies as observed by a scanning electron microscope. However, substantial proportions of the drug remained unreleased from the granules. In order to overcome the problems of drug retention, plain granules were used and theophylline mini-tablets (3 mm diameter, weighing 15 - 20 mg) were manufactured and film coated with various Eudragits ® and other polymeric mixtures (soluble and insoluble). In vitro dissolution profiles from samples enclosed in hard gelatin capsules were determined using the USPXXI paddle apparatus in test media at pH 1.2 (HCI), pH 5.4 and 7.4 (phosphate buffers) at 37'C. Monitoring of in vitro theophylline release over 12 h, under identical hydrodynamic conditions, showed that the dissolution rate at pH 1.2 is substantially greater (95% of total drug content released in < 10 h) than that in phosphate buffers. The maximum release after 12 h was approximately 20 and 30% of total drug content of the tablet at pH 5.4 and 7.4, respectively. However, in vivo bioavailability after oral administration of tablets to rabbits corresponded to over 95% of total drug, compared with the same dose administered intravenously. The retarded drug release during in vitro dissolution in phosphate buffer was attributed to a possible interaction of phosphate ions with theophylline molecules at the tablet core-coat interface. These findings indicate that both rate and extent of theophylline release from the slow release coated mini-tablets are highly sensitive to phosphate buffers. The data also emphasise the usefulness of an animal model for assessment of in vivo drug release and subsequent absorption during the development of modified release dosage forms. Mini-tablets were subjected to isothermal and cyclic stresses to reach conditions for up to 6 months at different temperatures and relative humidity. The film integrity was maintained but ageing of the coating occurred which impeded dissolution. Reduced drug release was temperature related while the effect of relative humidi% was insignific~t. Encapsulated mini-tablets (uncoated and coated with Eudragit RL and RS 2% w/w) equivalent to a 300 mg dose, were evaluated both in vitro and in vivo using beagle dogs. The pharmacokinetic parameters from single and multiple dose studies showed several advantages over Theo-Dur® 300 mg tablets. Precise dosage titration is possible by careful adjustment of the number of encapsulated mini-tablets. This multiple unit mini-tablet delivery system will allow for greater flexibility in dosage adjustment compared to the currently available preparations, allowing individualised fine dose titration in those patients requiring therapeutic drug monitoring. The developmentof the multiple unit mini-tablet formulation appears to provide an optimal dosage form with maximum flexibility in respect of dose, duration range and ease of production.
- Full Text:
Design, development and evaluation of encapsulated oral controlled release theophylline mini-tablets
- Authors: Munday, Dale Leslie
- Date: 1991
- Subjects: Drugs -- Administration , Drugs -- Bioavailability , Drugs -- Controlled release , Drugs -- Dosage forms , Tablets (Medicine) , Biopharmaceutics , Drugs -- Testing
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3777 , http://hdl.handle.net/10962/d1003255 , Drugs -- Administration , Drugs -- Bioavailability , Drugs -- Controlled release , Drugs -- Dosage forms , Tablets (Medicine) , Biopharmaceutics , Drugs -- Testing
- Description: Conventional solid dosage forms often lead to fluctuations which exceed the maximum safe therapeutic level and/or decline below the minimum effective level. It is recognised that many drugs for chronic administration should be administered on a schedule that maintains plasma drug concentration within the therapeutic window. Research in controlled release dosage forms aims at designing a system with a zero-order input (eg, ideally to deliver 8.33% of the dose per hour over a 12 hour duration), producing steady state plasma drug levels. Oral dministration of drugs prepared as a controlled release formulation is extremely popular, and has attracted the attention of pharmaceutical scientists during the last decade. This has been due to the simultaneous convergence of various factors (eg, discovery of novel polymers and devices, better understanding of formulation and physiological constraints, expiration of existing patents, prohibitive cost of developing new drug entities), involved in the development of these delivery systems. Controlled release oral products can be formulated as single or multiple unit dosage forms and the relative merits of multiple unit forms with their own rate controlling systems are well established. This work describes the development of a relatively inexpensive multiple-unit capsule dosage form of theophylline containing coated mini-tablets for drug delivery throughout the gastrointestinal tract. Preformulation studies on theophylline anhydrous included solubility and dissolution rate determinations. Techniques including X-ray powder diffraction, differential scanning colorimetry and infrared spectroscopy provided no evidence of true polymorphism after recrystallisation from various solvents. However, scanning electron micrographs showed the effects of solvent polarity and cooling rate on the size and shape of recrystallised particles. Theophylline granules were manufactured by using various binders and were film coated by fluidised bed technology with various proportions of ethylcellulose, containing varying amounts of PEG 1540. In vitro release rates were dependent upon coating thickness and the proportion of PEG, which, being water soluble, created pores in the coating during dissolution studies as observed by a scanning electron microscope. However, substantial proportions of the drug remained unreleased from the granules. In order to overcome the problems of drug retention, plain granules were used and theophylline mini-tablets (3 mm diameter, weighing 15 - 20 mg) were manufactured and film coated with various Eudragits ® and other polymeric mixtures (soluble and insoluble). In vitro dissolution profiles from samples enclosed in hard gelatin capsules were determined using the USPXXI paddle apparatus in test media at pH 1.2 (HCI), pH 5.4 and 7.4 (phosphate buffers) at 37'C. Monitoring of in vitro theophylline release over 12 h, under identical hydrodynamic conditions, showed that the dissolution rate at pH 1.2 is substantially greater (95% of total drug content released in < 10 h) than that in phosphate buffers. The maximum release after 12 h was approximately 20 and 30% of total drug content of the tablet at pH 5.4 and 7.4, respectively. However, in vivo bioavailability after oral administration of tablets to rabbits corresponded to over 95% of total drug, compared with the same dose administered intravenously. The retarded drug release during in vitro dissolution in phosphate buffer was attributed to a possible interaction of phosphate ions with theophylline molecules at the tablet core-coat interface. These findings indicate that both rate and extent of theophylline release from the slow release coated mini-tablets are highly sensitive to phosphate buffers. The data also emphasise the usefulness of an animal model for assessment of in vivo drug release and subsequent absorption during the development of modified release dosage forms. Mini-tablets were subjected to isothermal and cyclic stresses to reach conditions for up to 6 months at different temperatures and relative humidity. The film integrity was maintained but ageing of the coating occurred which impeded dissolution. Reduced drug release was temperature related while the effect of relative humidi% was insignific~t. Encapsulated mini-tablets (uncoated and coated with Eudragit RL and RS 2% w/w) equivalent to a 300 mg dose, were evaluated both in vitro and in vivo using beagle dogs. The pharmacokinetic parameters from single and multiple dose studies showed several advantages over Theo-Dur® 300 mg tablets. Precise dosage titration is possible by careful adjustment of the number of encapsulated mini-tablets. This multiple unit mini-tablet delivery system will allow for greater flexibility in dosage adjustment compared to the currently available preparations, allowing individualised fine dose titration in those patients requiring therapeutic drug monitoring. The developmentof the multiple unit mini-tablet formulation appears to provide an optimal dosage form with maximum flexibility in respect of dose, duration range and ease of production.
- Full Text:
- «
- ‹
- 1
- ›
- »