Showing items 161 - 180 of 1267

Your selections:

Applying a systems analysis approach to support marine spatial planning in Algoa Bay, South Africa

  • Authors: Vermeulen, Estee Ann
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Doctoral theses , text
  • Identifier: http://hdl.handle.net/10948/54121 , vital:46312
  • Description: Ocean health provides the foundation for human health through the provisioning of ecosystem services. Increasing demands on ocean space and resources are, however, resulting in a decline in ocean health, with direct and indirect knock-on effects on marine uses and ultimately on human health. In response, there is a growing need to acknowledge and better manage complex human-ocean interactions. This has been recognised in global sustainable development goals and in integrated ocean management processes, leading to widespread endorsement of an ecosystem-based marine spatial planning (MSP) process, including in South Africa. In support of the national MSP process, significant progress has been made in understanding the spatial extent of marine activities and associated marine pressures, but the temporal dynamics of marine activities and interconnections with the marine environment are less well understood. To plan for the growth of marine activities and associated user conflicts, the drivers of these temporal dynamics and associated feedback effects need to be analysed and potential policy and management interventions identified and tested. To support South Africa’s national MSP process, this study adopts a systems analysis approach, using system dynamics modelling, to explore the temporal change in marine uses under alternative growth scenarios in Algoa Bay. Algoa Bay is an appropriate study area because it is experiencing a rapid expansion of marine activities, coupled with a growing uncertainty regarding marine sustainability outcomes. To assist future marine management decisions, the Algoa Marine Systems Analysis Tool (Algoa MSAT) was developed, comprising seven sub-models. Five of the sub-models represent selected marine uses in Algoa Bay, whereas the sixth and seventh integrate the outputs from each marine use in terms of sustainable management indicators (marine health, marine wealth and marine labour). Model development primarily adopted an expert-based model ling approach, although the involvement of stakeholders, through a collaborative modelling process, assisted in integrating knowledge on different marine sectors’ activities, impacts and planning visions into the model framework. Model results were generated under different scenarios to investigate changes in the growth of marine activities and marine sustainability indicators under different levels of ocean governance. Under the baseline (or business-as-usual) model scenario, marine activities were shown to grow increasingly within their respective management limits, with an increase in marine wealth and labour and a consequential decrease in marine health. This scenario particularly highlights that current ocean governance practices are ineffective in sustaining the projected growth of the marine uses, particularly for those that are vulnerable to negative changes in marine health. Conversely, sectors that hold more value in marine wealth and are more resilient to changes in marine health, may continue to grow regardless of negative knock-on effects of the health of the marine environment and on other uses in the bay. This emphasises that an alternative governance strategy is needed to achieve the long-term goal of an ecosystem-based MSP process, as required by South African MSP legislation. To achieve this will require multiple, adaptive cross-sectoral management interventions that are directed towards the ‘deeper leverage points’ that are able to maintain the growth of marine activities within appropriate limits defined by marine health. Using the model interface developed in this project, decision-makers and stakeholders can use the model to explore the temporal dynamics in marine activities under different governance scenarios. Although the model is limited to Algoa Bay, the model boundary can be adapted to assist in marine planning processes at national or trans-national scales. Such analytical assessments and tools are critical to progress the ecosystem-based management approach in MSP, as is required to achieve global sustainable development goals. , Thesis (PhD) -- Faculty of Science, Coastal and Marine Research Unit, 2021
  • Full Text:
  • Date Issued: 2021-12

Beneficiation of pyrolysis-derived waste tyre char by blending with torrefied wood and microalgae to produce solid fuel

  • Authors: Dube, Cleopatra Thulani
  • Date: 2021-12
  • Subjects: Pyrolysis , Solid fuel reactors
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/58439 , vital:59241
  • Description: he thermal decomposition of waste tyres via pyrolysis is considered to be amongst the most promising methods of recycling tyres due to its minimal environmental impact (in terms of reduction in pollution). During pyrolysis, tyres are thermally degraded in an inert environment to produce gas, oil and char. The gas and oil have promising commercialization prospects while the char remains a pollutant despite the strides made in a lot of research to upgrade the char to carbon black, activated carbon and even for reuse as a filler in tyre manufacture. For pyrolysis to be profitable, or worthy of investments, all three of its products (oil, char and gas) need to be valorised. Pyrolysis-derived tyre chars (PT-char) have an energy value equivalent to high rank coals, however, the use of PT char as a solid fuel is uncommon due to the high contents of sulphur and mineral matter as well as low volatile matter content of the PT-char. As such, the combustion of PT-char is characterised by high ignition temperature, low thermal reactivity, and no flame formation due to the low amounts of volatile matter. On the other hand, biomass are clean, renewable feedstock, having low sulphur and mineral matter contents, as well as high thermal reactivity. The blending of PT-char with biomass could potentially improve the combustion properties of PT-char and minimise the release of toxic emissions from the char, and thus, could make PT-char suitable for use as a fuel source. In this study, PT-char was blended with torrefied wood and microalgae biomass to demonstrate the suitability of using PT-char-biomass-fuel blend as an energy feedstock. To this effect, a mixture design of experiments was used to formulate the PT-char biomass blends and regression analysis was employed to select an optimum blend formulation for the combustion and mechanical properties of the blends. Proximate analysis results showed a non-linear increase in the volatile matter and a non-linear decrease in the fixed carbon and ash yield as the biomass ratio increased. The calorific value also increased on an additive basis with increasing biomass proportion. The elemental analysis results showed a decrease in the calcium, zinc and bromine contents and an increase in the potassium and iron contents increased with increasing biomass proportion. Likewise, the sulphur content decreased while the oxygen, hydrogen and nitrogen contents increased with increasing biomass ratio. vi Thus, the fuel properties of the blends improved with increasing biomass ratio and without compromising the calorific value of the PT-char. Moreover, the TG-MS analysis showed that the PT-char and the respective blends did not show any release SO2 up to 650°C. Thus, making the fuel suitable for use in low temperature applications such as household and certain boilers. The results of the regression analysis showed that the blend formulation with the highest proportions of biomass, thus C55-T30-M15, is the optimum blend to produce a solid fuel with a low initial decomposition (214°C) and char ignition temperatures (532°C) as well as maximum burn-out temperature (640°C). In essence, the high thermal reactivity of PT-char is improved when both biomasses are loaded at maximum ratios as per the experimental design. The results of the MS showed a decrease in CO2 and NO2 emissions with increasing biomass proportion. The optimum blend (C55-T30-M15) was found to have a comparably higher gross calorific value (26 MJ/kg), lower sulphur content (1.1 wt.%), low ash yield (11wt.%) and lower concentration of minerals (i.e. zinc) than raw PT-char. In addition, the volatile matter content of the blend (20 wt.%) was found to be higher than that of PT-char and the ignition temperature of the optimum fuel blend was relatively lower and its burnout temperature higher than that of PT char. The MS results revealed that the CO2 and NO2 emissions were higher in the optimum blend than the PT-char. The mechanical properties of the pellets; impact resistance and compressive strength increased with increasing biomass blending ratio and even more so with increasing microalgae ratio. The C55-T30-M15 and C75-T10-M15 were selected as optimum blends using regression analysis and both blends exceeded the benchmark for mechanical properties except for water resistance. The blending did not improve the water resistance and all the blends did not meet the minimum threshold for water resistance. Overall, the blending of PT-char with torrefied wood and microalgae biomass has shown to improve the fuel properties PT-char, and therefore, making it a suitable potential fuel source. , Thesis (MSc) -- Faculty of Science, 2021
  • Full Text:
  • Date Issued: 2021-12

Coordination polymers for denitrogenation of fuel oils

  • Authors: Dembaremba, Tendai O
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Doctoral theses , text
  • Identifier: http://hdl.handle.net/10948/53630 , vital:45682
  • Description: In this thesis, we present adsorptive removal of nitrogen-containing compounds from fuel oil as an alternative to complement conventional hydrotreatment to obtain ultra-low sulfur and nitrogen levels. This is in cognizance of the challenges nitrogen-containing compounds pose to the hydrotreatment process, particularly their inhibition and/or poisoning of the catalysts used in the process, of which basic nitrogen-containing compounds are the major culprits. Selectivity is the biggest challenge for adsorptive removal of nitrogen-containing compounds. We explore reticular synthesis of metal organic frameworks and the use of coordinatively unsaturated metal sites in 1-dimensional coordination polymers to achieve good selectivity for nitrogen-containing compounds. In the first part of the thesis, reticular synthesis of metal organic frameworks to control the size of the cavity, and strategically use the linkers and metal centres was envisaged. In this work we explored variation of the metal centres in the secondary building units (SBUs of the MOFs as the first step to the testing and implementation of the design strategies. Carbazole, representing carbazoles which the major compounds that remain in hydrotreated fuel, was the target compound. Four MOFs of zinc (Zn-CDC-bpe), copper (Cu-CDC-bpe), nickel (Ni-CDC-bpe) and cobalt (Co-CDC-bpe) based on the formation of a dinuclear metal paddlewheel SBUs with the ligand 9H-Carbazole-3,6-dicarboxylic acid (H2CDC) and occupation of the axial positions of the paddlewheel by 1,2-Bis(4-pyridyl)ethane (bpe) to form porous networks were synthesized. A fifth MOF containing only CDC which forms a [Zn4O(O2C-R)5(O2HC-R)] SBU was also synthesized (Zn-CDC). The ligand H2CDC was inspired by the possibility of improving selectivity for carbazole via π–π interactions through the more preferred parallel-offset stacking as well as the possibility for further substitution of the carbazole N-H to add groups that improve selectivity. The sizes of the MOF cavities can then be controlled by choosing different lengths of ligands analogous to 1,2-Bis(4-pyridyl)ethane (bpe), e.g. 4,4’-bipyridine and pyrazine. All the MOFs showed good selectivity of carbazole. The Zn-CDC MOF also had good selectivity for the basic nitrogen-containing compounds tested: quinoline, isoquinoline, quinaldine and 1-naphthylamine. Its uptake of carbazole was also slightly higher. This was attributed to the presence of an unsaturated Zn site in the SBU. Adsorption in all the MOFs was primarily due to physisorption. It was concluded that the role of the metal centre does not play a significant role in the adsorption of carbazole besides providing a template for reticular synthesis. , Thesis (PhD) -- Faculty of Science, School of Biomolecular and Chemical Sciences, 2021
  • Full Text: false
  • Date Issued: 2021-12

Corrosion and hydrogen resistant modified zirlo surfaces for nuclear fuel cladding

  • Authors: Ngongo, Sinoyolo
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Doctoral theses , text
  • Identifier: http://hdl.handle.net/10948/54077 , vital:46252
  • Description: Zirconium (Zr) alloys are used as fuel cladding material in all modern water cooled commercial nuclear reactors. Zr alloys have many desirable properties for the nuclear reactor core environment, however, it also has a weakness in that overheated zirconium alloy fuel rods react with hot steam resulting in the release of hydrogen. High temperatures increase the oxidation rate and hence the hydrogen production rate which in turn increase the risk of a hydrogen gas explosion such as what is surmised to have happened in the 2011 Fukushima Daiichi nuclear plant incident. The some of the hydrogen produced will also diffuse into the zirconium alloy and form zirconium hydrides which will weaken the original zirconium alloy material. The development of accident tolerant fuel became a major focus area after the Fukushima event in March 2011 with the U.S. congress directing the U.S. Department of Energy to develop fuel with enhanced accident tolerance at high temperatures. The main objective in the case of zirconium alloy cladding has been the modification of cladding surface layers by coating or doping in order to reduce the oxidation rate and hydrogen generation rate by the reaction of steam with zirconium alloy cladding at high temperatures. This thesis focuses on two surface modifications to decrease the surface corrosion rate of ZIRLOTM (the Zr alloy used in this study) and reduce hydrogen uptake by ZIRLO. The first modification involves an oxidation-resistant nano-crystalline diamond (NCD) film deposited on ZIRLO. The NCD layer was deposited in a microwave plasma-enhanced linear antenna chemical vapor deposition (MW-LA-PECVD) system after immersion of the ZIRLO tubes in a water-based solution containing nanodiamonds. ZIRLO tube samples were coated with 200 nm and 500 nm thick NCD layers. The 200 nm thick NCD coated ZIRLO was kept as control sample whereas the 500 nm thick NCD coated ZIRLO was exposed to steam oxidation at 360 °C for 90 days. The results revealed that the NCD exfoliated in some areas leaving the ZIRLO exposed to the steam. In the areas where the diamond did not exfoliate, the diamond was still attached to the ZIRLO with an amorphous carbon layer present between the NCD and the zirconium oxide layer.The transmission electron microscopy (TEM) results of this study indicate the presence a sp3 – hybridised diamond phase for the NCD layer as well as an intermediate amorphous carbon layer between the NCD and ZrO2 layers. Analyses of the area where the NCD layer had exfoliated showed no evidence of an NCD layer. It is possible that the amorphous carbon layer between the diamond and the zirconium oxide is responsible for weak interfacial bonding leading to partial exfoliation during oxidation in steam 360 °C for 90 days. In the second modification, the effectiveness of a Cr doped ZrO2 layer to reduce the migration rate of hydrogen in ZrO2 was investigated. The ZIRLO tube used for this part of the study did not have a thin oxide passivation surface layer. Two different procedures were used to create chromium doped zirconium oxide surface layers on ZIRLO. The ZIRLO surface was coated with chromium using cathodic arc deposition followed compression plasma flow (CPF) treatment to facilitate intermixing of the Cr and the ZIRLO. In procedure 1, the surface modification was achieved through the incorporation of chromium into the zirconium surface layer using a compression plasma flow (CPF) technique, followed by the oxidation of the chromium doped zirconium. The oxidation process was conducted at 500 °C for 6 hours. In procedure 2, the chromium was incorporated into the zirconium oxide layer again using the CPF technique. Hydrogen desorption was measured from pure ZIRLO and CPF modified samples using a special gas reaction controller system. The key finding of the results is that the chromium doped (incorporated) zirconium oxide layer on ZIRLO sample exhibited the lowest hydrogen desorption rate of all the samples analysed. This indicates that H in the Cr doped zirconium oxide layer had the lowest mobility of all the samples investigated. This is consistent with the theoretical predictions that the doping of ZrO2 by Cr reduces the solubility of hydrogen in ZrO2. , Thesis (PhD) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
  • Full Text: false
  • Date Issued: 2021-12

Effect of coal and microalgae biomass co-firing on CO2, SO2 and NOx emissions: An experimental evaluation

  • Authors: Magida, Nokuthula Ethel
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/53817 , vital:45984
  • Description: There is increasingly stringent legislation on the environmental impact of energy production from coal combustion, and this has led to growing pressure to reduce the emission of greenhouse gases (GHGs). Thus, there is a significant need to develop and implement clean coal combustion technologies that would reduce the environmental gas pollutants. For power generation, the co-firing of biomass fuels at conventional coal-fired power stations is recognised as one of the low-cost, low-risk options to achieve significant reductions in GHG emissions. When coal is co-utilized with biomass there is added attractiveness because the biomass is CO2 neutral, and there is interest in using waste biomass and microalgae. Thus, the co-combustion of coal and biomass for energy production results in pollutant reduction, especially in the emissions of NOx, SOx, volatile organic compounds and polyaromatic hydrocarbons. The synergistic activity observed for toxic organic emissions is not well understood and is thought to involve chemical interaction between the volatiles from each fuel coupled with possible catalytic activity from the inorganic constituents of the fuels. The characterization of co-firing products and gases emitted from coal and microalgae (particularly the Scenedesmus strain) co-combustion has received limited attention. Therefore, this study seeks to understand possible interactions occurring during co-combustion of coal and Scenedesmus microalgae (Coalgae®). Additionally, the study aims to determine the effect of co-firing coal and Scenedesmus microalgae on CO2, SO2 and NOx emissions. The term “Coalgae®” refers to the mixture of coal and microalgae biomass. The study looks at physico-thermal characteristics as well as CO2, SO2 and NOx emissions of various coal-microalgae blending ratios by mass; 100:0 (coal), 95:5 (Coalgae® 5%), 90:10 (Coalgae® 10%), 85:15 (Coalgae® 15%) and 80:20 (Coalgae® 20%). Characterization techniques carried out included proximate and ultimate analyses, Fourier-transform infrared (FT-IR) and Scanning electron microscopy and X-ray energy dispersive spectroscopy (SEM/EDS). For combustion studies two techniques were applied. Low heating rate was obtained through a Thermogravimetric-Mass spectrometer analysis (TG-MS). Other combustion experiments were performed on the five lumpy fuels (coal and Coalgae® 5% - 20%) exposed to the flame in a fixed-bed combustion reactor. The emission concentrations of CO2 (%), NOx (ppm) and SO2 (ppm) of coal and Coalgae® blends were measured during the combustion of the five materials using a Lancom 4 portable flue gas analyser. The mass reduction (g) and temperature (°C) at the reactor exit were recorded during the combustion tests to compare the combustion behaviour of the four mixtures to that of raw coal. TG-DTG curves of coal and microalgae confirmed that the combustion behaviour of these materials was different. Coal showed one reaction during the combustion process, while microalgae and the Coalgae® blends showed three reactions. A significant reduction in activation energies of 160.4 kJ/mol, 159.6 kJ/mol, 151.3 kJ/mol, and 134.2 kJ/mol for Coalgae® 5% - Coalgae® 20%, respectively, compared to coal (161.3 kJ/mol) was achieved. The lowering of activation energy could be attributed to the relative fixed carbon content. SEM morphology images of ash obtained from the combustion of coal and Coalgae® 5% - 20% confirmed changes in devolatilization and combustion behaviour of solid raw fuel. The ash of Coalgae® blends had higher fluxing elements (Fe, Ca, K and Mg) than coal and this shows possibility of slagging and fouling in combustion systems. The Coalgae® blends showed a synergistic effect due to different combustion characteristics of coal and Scenedesmus microalgae. The combustion results obtained from the fixed-bed reactor showed significant reductions in concentrations of CO2, SO2 and NOx emissions for Coalgae® blends compared to baseline coal. Microalgae reduced CO2 emissions from baseline coal by 14.9%, 19.5%, 23.5% and 31.4% for Coalgae® 5%, 10%, 15% and 20%, respectively. SO2 reductions of 1.9%, 10.6%, 15.8% and 18.2%, and NOx reductions of 22.4%, 26.1%, 24.4% and 16.9% were achieved with Coalgae® 5%, 10%, 15% and 20%, respectively. Moreover, the combustion efficiency of Coalgae® blends increased significantly by up to 14.5% from baseline coal (86.4%) to Coalgae® 20% (98.9%). Based on the above findings, the co-firing of coal and Scenedesmus microalgae biomass was necessary for the reduction of CO2, SO2, and NOx emissions. As such, Coalgae® blends can be considered as alternative fuels in any coal driven process for energy generation. , Thesis (MSc) -- Faculty of Science, School of Biomolecular and Chemical Sciences, 2021
  • Full Text:
  • Date Issued: 2021-12

Engineering nanocatalysts using mixed metals for hydrodesulfurization of fuel oil

  • Authors: Majodina, Siphumelele
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/53861 , vital:46021
  • Description: Crude oil is a complex blend containing thousands of hydrocarbons, non-hydrocarbon compounds and heavy metals. These hydrocarbons are mixed with variable quantities of sulfur-, nitrogen-, and oxygen-containing compounds. The combustion of fuel containing organosulfur compounds results in the emission of sulfur oxides (SOx) into the atmosphere. These toxic gases escape into the atmosphere resulting in air pollution, which is a large contributor to global warming. Air pollution also causes pulmonary diseases, allergies and may even lead to human death. It can also cause harm to other living organisms such as animals and food crops. Thus, mandating the reduction of sulfur in organosulfur compounds in fuel to <10 ppmS by the environmental protection agency. Several studies have been conducted to remove sulfur from fuels, most of which have focused on removing refractory sulfur compounds due to the difficulty in removing sulfur in these compounds. However, the currently employed hydrodesulfurization (HDS) catalysts suffer in producing fuels complying with the future standards of fuels quality. Generally, HDS catalysts are made up of metallic components, Co (Ni) and Mo (W), on porous supports, the catalytic activity of these catalysts strongly depends on the amount of NiWS (CoMoS) phases in it and to the extent in which these phases are exposed on the catalyst support surfaces and this is engineered using chelating agents and size of catalysts. To this end, nanosized materials (nanocatalysts) are considered most suitable, as reported active phases of HDS catalysts are exposed, hence improving the hydrodesulfurization of sulfur-containing compounds in fuels. Nanocatalysts results in nanoparticles and when impregnated on a support will results in high surface area, and enhances electronic property, which increases the activity of the catalyst allowing the most refractory sulfur to be removed. The addition of chelating agents such as EDTA, acetic acid, and citric acid further improves the activity of the catalysts by producing more active phases on the catalyst. In this research project, nanocatalysts will be synthesised using mixed metals with and without chelating agents and tested for HDS activity and selectivity towards sulfur using refractory organosulfur compounds in fuels under industrial HDS conditions. This work was divided into two sections, and this dissertation summarizes the research outcomes of each phase. The first section examines the effect of chelating ligands, namely, ethylenediaminetetraacetic acid (EDTA), citric acid (CA), and acetic acid (AA), on CoMo HDS activity and the sulfidation mechanism. In this study, chelating ligands seem to have a beneficial effect on HDS activity. Detailed mechanistic aspects of interactions between chelating ligands and metallic species (Co-chelating ligands) were also studied. Characterization by SC-XRD revealed that the presence of the chelating ligand result in the formation of complex with cobalt, and the effect of this complex was shown by TG-DSC analysis. This showed that the presence of chelating ligand leads a to delay of cobalt sulfidation as the complex decomposes at higher temperatures, which was the main cause of improving HDS activity. It was also shown that chelating ligands play a role in dispersion of metal oxides and sulfided metal oxides (TEM and XPS). XPS results showed low MoS2 phase for CoMo/Al2O3 (45%), while CoMo-EDTA/Al2O3 (63%) catalyst resulted in high MoS2 phases. From all the catalysts, CoMo-CA/Al2O3 (98%) gave the highest catalytic activity, and the increase in activity could be attributed to the formation of octahedral molybdenum oxides as they are easily reducible during sulfidation and result in more dispersed active phases and weak metal-support interaction. The second section examines the effect of a promoter (Rh) and different chelating ligands (EDTA, AA, and CA) on the catalyst RhMo supported with alumina. In this phase, rhodium was used as promoter, the following trend for catalytic activity was observed: RhMo/Al2O3 (88%) > RhMo-AA/Al2O3 (73%) > RhMo-CA/Al2O3 (72%) > RhMo-EDTA/Al2O3 (68%). This could be that the addition of chelating ligand complexed both metallic species retarding sulfidation of both metals, hence lowering the HDS activity. Studies show that it is possible for the citric acid to complex with both promoter and an active metal (Mo), and this might result in the formation of molybdenum dimers, trimers and tetramers which are difficult to sulfide. XPS analysis showed that unchelated catalyst have more MoS2 phases of 63%, hence higher dispersion than the chelated catalyst, this could be the reason for high activity in RhMo/Al2O3 (88%) catalyst. , Thesis (MSc) -- Faculty of Science, School of Biomolecular and Chemical Sciences, 2021
  • Full Text:
  • Date Issued: 2021-12

Factors influencing first-year students’ career decisions to pursue an IT career

  • Authors: Twani, Malibongwe
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/54135 , vital:46306
  • Description: The process of deciding on a career is a dauntingand life-changing decision,which all scholarshave had to make. Various factors influence a first-year student’s career choice decision and selected field of study. Career decision-making,as a field of study, has been extensivelyresearched,globally. The research studies focusingon IT career choicesof studentshave indicated that scholars choosing careers in Information Technology (IT) are influenced by factors such as salaries, knowledge of career opportunities, the reputation of IT-related fields in society and by parents, teachers and role models. Recent research indicates that exposure to new technologies and programming concepts at the school level can influence a scholar’s IT career choice. Theories relating to career choice have focused on the characteristics of individuals and their environment. Career choice models have identified factors that influenced a student’s career choice.In South Africahowever,there have been limited studies investigating the factors influencing students’ career decisions in choosing careers in Computer Science (CS), Information Systems (IS) and Information Technology (IT)using mixed-methods.This study aims to investigate the factors that influence first-year students’ decisionsin choosing an IT career at the Nelson Mandela University.The research study pursueda pragmatisticapproach,using a mixed-methods approach. In investigating theories andfactors that influence students’ decisionsin choosing IT careers,the study used systematic literature reviews. The decision-making theories and factorsin theliterature review facilitated the creation of the conceptual framework for IT career decision making. A questionnaire was developed and distributed amongst ITand Non-ITfirst-year studentsin 2021. Fourhundredand eightparticipants completed the survey. The data obtained from the survey were statistically analysed, includingdescriptive analysis andExploratory Factor Analysis(EFA). Additionally, inferential statistics were used namely; Correlations, t-test, Confirmatory Factor Analysis(CFA)and Structural Equation Modelling(SEM). The study results wereinterpreted andcompared with iiiotherrelevantstudies. Recommendations were madeto address the factorsthat influencefirst-year students’ IT career decisions.The study highlighted that high academic confidence and personal attributes amongststudents,whowereinvolved at an early age in programming and using computers,chose IT as a career. The study showed significant statistical differences betweenIT and Non-IT groups in perceptions about the IT industry and identifying job title descriptions.Additionally, a significant statistical difference between languages and genders was identified in understanding careers. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
  • Full Text:
  • Date Issued: 2021-12

In-vitroevaluation of bridelia ferruginea extract gold nanoparticles for the treatment of colon cancer

  • Authors: Zosela, Itumeleng , Davids, Hajierah
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/54124 , vital:46311
  • Description: Colorectal cancer (CRC) has become a health burden, being the third common cancer worldwide. Treatment of colorectal cancer is very important to manage the high prevalence rate of this disease. The available treatments for CRC have their drawbacks and side effects. Available treatments of colon cancer include surgery, chemotherapy, and radiation. Due to the side effects associated with these treatments, alternative treatments that pose less side effects are being developed worldwide. Nanotechnologies have gained global consideration due to their potential to improve the current standards and techniques for the diagnosis and treatment. The use of plants for synthesis of gold nanoparticles has opened a new venture of synthesizing environmentally friendly and cost-effective nanoparticles which possess great properties for CRC treatment. The aim of this study was to investigate the use of green synthesized AuNPs from Bridelia ferruginea for potential cancer treatment. In this work study gold nanoparticles were synthesized utilizing Bridelia ferruginea stem bark extract. The nanoparticles were characterized using UV–Vis spectroscopy, Dynamic Light Scattering (DLS), Fourier Transform Infrared Spectroscopy (FTIR) and High-Resolution Transmission Electron Microscopy (HRTEM). The in vitroanti cancer activity of the AuNPs was investigated using Presto Blue assay, cellular morphology, caspase 3/7 assay on the human colon cancer cell line at different times to assess the optimum time for cell death. The cellular uptake and localization of AuNPs was investigated using HRTEM to assess uptake and location of the AuNPs within the cell. Results obtained from this study showed that the AuNP synthesis from Bridellia ferrugenia was successful. The Presto Blue cell viability results showed that the AuNPs reduced cell viability (%) significantly (p<0.05) after 24 h. The optimum treatment time of HT-29 cells with AuNPs was determined to be 24 h. The apoptotic effects of the AuNPs were assessed using Cell Event reagent, and the results from this assay indicated that caspase 3/7 was activated with treatment with AuNPs which induced cell death via apoptosis. The HRTEM results indicated that there was no uptake of AuNP targeting in HT-29 therefore localization could not be determined. It can be concluded that the AuNPs synthesized from Bridellia ferrugenia have anti-cancer properties and are able to induce cell death through apoptosis. Furthermore, this study revealed that optimization of the AuNPs for cellular uptake is needed to further understand the interaction between the nanoparticles and the cells. This will provide more insight on how cellular death is induced by the nanoparticles. , Thesis (MSc) -- Faculty of Science, Department of Biochemistry and Microbiology (including Physiology), 2021
  • Full Text:
  • Date Issued: 2021-12

Mangrove response to water level changes at the Nxaxo-Ngqusi and St Lucia Estuaries

  • Authors: Julie, Corianna Lauren
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/53644 , vital:45689
  • Description: Water level variability within an estuary can vary as a function of tides (inundation frequency and duration) and rainfall, acting as one of the main determinants of mangrove growth, diversity, productivity, and distribution. Understanding how mangroves respond in estuaries to water level variability provides baseline information which can be used to predict future changes in mangrove growth and distribution in response to this driver This study measured mangrove characteristics (growth, structure, and areal extent) in two estuaries that differed in tidal setting, and thus water variability; the Nxaxo-Ngqusi and St Lucia estuaries, South Africa. These estuaries are part of a long-term monitoring programme (2010 - 2020) that has recorded mangrove responses to environmental changes. At the Nxaxo-Ngqusi Estuary, long-tem sea-level data (2003 – 2018) collected from the nearest tide gauge, and mangrove growth and areal extent were used to assess mangrove characteristics in a permanently open, micro tidal setting.Additionally, short-term water level data (August 2019 – September 2020), measured with in situ loggers, and sediment input at different sites within the mangrove forest, were also measured. Data was collected along the main channel sites, and at previously set up cattle exclusion plots ( browsed and non-browsed sites set to establish the effect of cattle browsing on mangroves). Similarly, at the St Lucia Estuary, long term water level data (2004 – 2020) collected at the bridge in the lower reaches of the estuary by Ezemvelo KZN-Wildlife, and annual mangrove growth, structure and areal extent data were used to assess mangrove characteristics in an estuarine lake that undergoes cycles between hypersaline and freshwater-dominated states. The results showed that mangrove responses to water level changes are complex and depend on several factors such as estuary mouth dynamics, anthropogenic activities, and site-level environmental conditions. The first objective was to compare water level changes and mangrove structure (mangrove height, and pneumatophore characteristics such as height, density and % aerenchyma) and sediment input between different sites at each estuary. Mangrove growth was higher at sites where longer inundation and higher inundation frequency were recorded at the Nxaxo-Ngqusi Estuary. However,longer inundation periods under closed mouth conditions resulted in stunted growth and mangrove dieback at St Lucia Estuary. At the Nxaxo-Ngqusi Estuary, mangroves at the main channel sites, closer to the water’s edge, had an overall higher growth rate (2.8 – 45.9 cm yr-1) than the mangroves found at the browsed (0 – 25 cm yr-1) and non-browsed sites (0 – 25.3 cm yr-1) on the landward edge of the forest. The effect of cattle browsing at these sites forms part of a long-term monitoring programme and this disturbance could have also influenced the results. Mangrove growth rate was higher in years with more rainfall at all sites within the estuary. At the St Lucia Estuary, mangrove growth rate was highest (0.81 cm yr-1) at a lower mean water level range (0.13 – 1.72 m) between 2010 - 2015, and growth rate was lowest (1.3 cm yr-1) in higher mean water level range conditions (0.34 m – 2.18 m) between 2015 – 2020. When water levels increased by up to 1.1 m due to closed mouth conditions, this led to extensive mangrove dieback further upstream by 2015. The maximum tidal flooding depth and inundation period influenced pneumatophore structure (height, density, and % aerenchyma) at the Nxaxo-Ngqusi Estuary. Sediment accumulation was highest at sites with increased pneumatophore density, but accumulation rates at the Nxaxo-Ngqusi Estuary (0.4 – 0.7 g over a high tide lasting 4-5 hours) were low and did not lead to smothering of the pneumatophores. Total sediment accumulation was highest at sites that experienced greater flooding depths. Increased inundation at the St Lucia Estuary caused inundation stress which led to mangrove mortality. This is because these mangroves are found in a closed estuary where increased water levels lead to prolonged submergence of the pneumatophores. A decrease in mangrove area was recorded at both sites. Low rainfall coupled with cattle browsing caused a decrease in mangrove area of 22% between 2009 and 2019, particularly along the mangrove fringe area at the Nxaxo-Ngqusi Estuary. The mangroves at the St Lucia Estuary, however, experienced mangrove dieback at all sites, with Site 1 recording the greatest percentage decrease in area of 71.7 % (loss of 44.76 ha) between 2010 and 2020. This was related to the progressive increase of freshwater input and water level at St Lucia Estuary under closed mouth conditions. The years leading up to 2019 had peaks in water levels at the St Lucia Estuary, with the highest water level of 2.12 m in 2019 since 2002. As a consequence, there was increased reed growth, where reeds expanded by 58% (177 ha) due to the high influx of freshwater, and no tidal exchange, which occurred in conjunction with a loss of 60.% (42 ha) of the original mangrove extent at the St Lucia Estuary. This study shows that increased water level changes (inundation frequency and duration) at the Nxaxo-Ngqusi Estuary maintain healthy mangrove stands. This is in contrast to the St Lucia Estuary, where there was a loss of mangroves as a result of high water levels under closed mouth conditions. Mangrove growth and extent at the Nxaxo-Ngqusi Estuary fluctuated in response to drought, and trampling and browsing by livestock. Extensive inundation and lack of tidal exchange reduced mangrove growth and extent at the St Lucia Estuary, with mangrove dieback occurring at all sites. These two systems are representative of the dynamic conditions found in South African estuaries. These research findings suggest that the continuous effects of climate change on estuarine habitats could result in changes in estuary mouth dynamics, which could impact mangrove growth, structure, and extent. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2021
  • Full Text: false
  • Date Issued: 2021-12

Microstructural characterization of Swift Heavy Ion (SHI) induced rotation in single crystal NiO

  • Authors: Douglas-Henry, Danielle
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Doctoral theses , text
  • Identifier: http://hdl.handle.net/10948/53648 , vital:45685
  • Description: Swift Heavy Ions (SHI) are characterised by having energies greater than 1 MeV per nucleon with an atomic mass greater than 6 amu. Exposure to irradiation of this type has been known to produce latent tracks in insulators. This is due to the energy loss through the material being governed by electronic excitation processes. The extent of the track formation and microstructural changes induced has been reported to be material specific. Models such as the thermal spike model have been used to explain these changes, however rough approximations are still made. A particularly under studied phenomena is the collective rotation seen in materials exposed to off-normal incidence irradiation. To date the only available experimental data is X-Ray Diffraction (XRD) spectra and surface shifts. This does not allow for depth-dependent rotation studies and very little can be deduced regarding the microstructure of the modified volume. In this study, the microstructural changes in single crystal Nickel Oxide (NiO) have been studied using electron microscopy techniques. A depth dependent investigation of the crystal rotation was performed using Selected Area Electron Diffraction (SAED), Transmission Kikuchi Diffraction (TKD) and Electron Backscatter Diffraction (EBSD). Transmission Electron Microscopy (TEM) and Scanning Transmission Electron Microscopy (STEM) were utilized to interrogate the microstructural changes facilitating the bulk rotation. Five different NiO specimens were investigated. Specimens had surfaces parallel to either the {0 0 1} or {1 1 1} planes. Ion energies used were 593 MeV, 940 MeV and 1.6 GeV, while fluences ranged from 1.0 x 1011 ions/cm² to 9.6 x 1014 ions/cm². Latent track formation in both low fluence (nonoverlapping regime) and high fluence (overlapping regime) specimens were investigated and compared. , Thesis (PhD) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
  • Full Text: false
  • Date Issued: 2021-12

Modelling African swine fever disease in domestic pigs with culling and removal of contaminated feeds

  • Authors: Ndivhuwo, Netshamutshedzi
  • Date: 2021-12
  • Subjects: African swine fever virus , domestic pigs-- South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/55822 , vital:53895
  • Description: In this study, a modelling African Swine Fever disease in domestic pigs with culling of infected pigs and removal of contaminated Feeds is studied. The goal of the study is to examine if culling of infected pigs and removal of contaminated food or water on pig farms can reduce the ASF trans mission in the domestic pig population. The SEAI-B model without control strategies is studied and analysed. It is shown that the solution for the system of model equations is both bounded and positive. We have found the disease free equilibrium point, basic reproductive number (using next generation method), local stability of disease free equilibrium (using Routh-Hurwitz criterion), global stability of disease free equilibrium, endemic equilibrium point (mathematica), existence of endemic equilibrium point, local stability of endemic equilibrium point (row echelon expression with the help of Maple 2.8) and global stability of endemic equilibrium point (Lyapunov function). Furthermore, sensitivity analysis is performed on the key parameters driving ASF Virus and to de termine their relative importance and potential impact on the dynamics of ASF Virus. Numerical result shows that if we increase the contact rate between susceptible pigs and infected pigs will re sults in increase ASF disease in the population. The SEAI-B model is reformulated incorporating culling of infected pigs and removal of contaminated food or water and analysed. Firstly, we found the disease free equilibrium point, basic reproductive number (using next generation method), local stability of disease free equilibrium point, global stability of disease free equilibrium point, endemic equilibrium point and local stability of endemic equilibrium point. Numerical result shows that if we increase culling of infected pigs and removal of contaminated food or water results in increase of susceptible pigs. The dynamic behavior of the model appears to be dependent on the culling of diseased pigs and the removal of contaminated food or water, according to numerical simulation. As a result, combining culling of infected pigs and removal of contaminated food or water as controls, it is possible to control the system in such a way that it approaches the desired state. , Thesis (MSc) -- Faculty of Sciences, School of Computer Science, Mathematics, Physics and Statistics, 2021
  • Full Text:
  • Date Issued: 2021-12

Ocean structures and dynamics of two open bays on the eastern Agulhas Bank

  • Authors: Dlomo, Xolisa
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Doctoral theses , text
  • Identifier: http://hdl.handle.net/10948/53607 , vital:45680
  • Description: Upwelling, bay-scale currents, fronts and mixing in Algoa Bay and St Francis Bay occur over both short and long time periods. These physical ocean dynamics drive the temporal and spatial distribution of nutrients in the bays, there by influencing primary and secondary production. Thermal gradients and fronts are driven by the wind and open ocean influences, such as the Agulhas Current, daily and seasonal variations in solar radiation, long and short period waves, air-sea fluxes, coastal trapped waves and terrestrial freshwater inflow. These phenomena are poorly understood along this part of the coastline and were the focus of this study. I investigated the dominant temperature scales of variability in both bays, to determine which isotherm is best suited to describe temperature fluctuations and thermocline spatiotemporal variability in and between the two bays. I investigated upwelling spatiotemporal variability in the two bays and tested whether upwelling occurs at the opposite sides of the bays with a change in wind direction. Thereafter studied the occurrence and drivers of winter upwelling events. The wind-driven current spatiotemporal variability and correlations were investigated at the extremities of the two bays. The daily, intra-seasonal and yearly variation in temperature structures in Algoa Bay and St. Francis Bay were mainly driven by the local winds, coastal topography, and bathymetry. The most suitable isotherm to describe thermal fluctuations and variability in Algoa Bay shallower sites was 16.5 °C and its mean depth was 16.2 m. The best isotherm for the deeper sites in Algoa Bay was 15.7 °C with a depth of 33.1 m. The average temperature and depth of the best isotherm to describe thermal fluctuations in St. Francis Bay for the shallower sites was15.80 °C and 16.83 m, and for the deeper sites it was 15.10 °C and 32.08 m. Algoa Bay showed an average cooling trend of -0.000172 °C per year, whereas in St. Francis Bay a warming average trend of 0.0188 °C per year was observed over the study period often and six years, respectively. The wind, Coriolis Effect and Ekman Transport were the main external forces that influenced upwelling throughout the year. Since the available mesoscale indices for upwelling intensity lack the resolution needed to characterize and compare inner-shelf upwelling regimes at small spatial scales, I developed a new local, quantitative index of thermal variability. Index calculations were based on hourly records of in site depth-averaged temperatures, measured at 6 sites in St. Francis Bay and at 8 sites in Algoa Bay. Using the Multivariate Upwelling Zone Index of Cooling (MUZIC) I found that Woody Cape and Blue Horizon Bay had the highest upwelling intensity in Algoa Bay and St. Francis Bay, respectively. The other sites were ordinated and ranked according to their upwelling rates and intensity. Evidence of wind-driven winter upwelling was found to be a common occurrence in both bays. There was no obvious current seasonality observed, however, strong spectral signals in the period of a weather band (4 –7 days) were present. Current structures were generally positively correlated with wind variations in both bays. Thus, when westerly/easterly winds blew the overall surface current direction was eastward/westward. I observed a pronounced current spatiotemporal variability that was driven by local winds. The Bird Island surface currents in Algoa Bay were strongly correlated at 0–lag day with the winds, however, in Cape Recife the strongest correlations were usually observed at 1–lag day highlighting the spatiotemporal influence of wind regimes on current structures in Algoa Bay. Bird Island current speeds were higher and had an obvious bimodal directional variation (south westward /north eastward) compared to Cape Recife currents, which generally had a slower current speed with a strong west-north westward direction. In St. Francis Bay, the Schoenmakerskop surface currents showed weak positive correlation with winds at 0–lag day, however, stronger negative correlations were observed at 4–lag days. The current surface speeds in Schoenmakerskop were the lowest and varied directionally between north-north eastward and south-south eastward. The basic data requirements (i.e. SST/ UTR and ADCP time series) and the simplicity of the calculations make these indices a useful tool to apply to a large number of sites nationally and internationally, and to examine the generality of community and population-level responses to physical forcing. , Thesis (PhD) -- Faculty of Science, Journalsim and Media Studies, 2021
  • Full Text:
  • Date Issued: 2021-12

Optimization of liposomes for enhanced stability against degradation by gastrointestinal fluid content

  • Authors: Scholtz, Carla Chleo
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/54117 , vital:46305
  • Description: Motivation: Liposomes are nanoparticulate carriers consisting of a hydrophobic bilayer and a hydrophilic core. Their application as drug carrier systems arises from their unique physiochemical structure, biocompatibility and biodegradability. Their biphasic nature is significant in the delivery of peptide and protein drug molecules as it is thus able to encompass both hydrophobic and hydrophilic molecules. Liposomes are actively being used for drug delivery intravenously. These formulations have been successful in reducing side effects and improving therapeutic efficacy. However, the intravenous route poses many challenges and is not the preferred route of administration amongst patients. The oral route of administration is non-invasive, and administration is of ease, therefore it is the preferred route of administration amongst patients, especially those with complex medicine regimes. Problem: The gastrointestinal tract is a harsh environment. In order for liposomes to maintain their integrity during their course they require a level of stability against gastric and intestinal fluids and its associated constituents such as gastric and pancreatic enzymes, low pH and bile acid. Methodology: Based on recommendations extrapolated from literature, the incorporation of a bile salt, sodium glycocholate, into liposomes in conjunction with coating the surface with chitosan was selected as the optimization strategies to enhance the stability of liposomes against degradation in the gastrointestinal tract. Bilosomes with encapsulated calce in were produced using the thin-film hydration method and coated with chitosan. An in vitrocalce in release assay was conducted in simulated gastric and intestinal fluids which presented with in vivo conditions in terms of pH and enzymes and additional constituents such as a bile salt. Stability was determined by the extent of digestion within the simulated fluids with time. Results: Characterization results suggested that the addition of chitosan and sodium glycocholate to the liposomal formulation has significant effects on the physiochemical properties. The colloidal dispersions could not retain their stability during storage which was noticeable during HRTEM. Despite optimization of the liposomes, in vitro studies showed significant release in both simulated gastric and intestinal fluids, with majority release seen in the presence of pepsin and pancreatic, at low pH and in the presence of bile acid. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
  • Full Text:
  • Date Issued: 2021-12

Optimizing herbicide-use for the killing of eucalypt stumps

  • Authors: Mavhungu, Tshilidzi
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/53857 , vital:46023
  • Description: The South Africa (SA) forest industry relies on plantations of exotic forestry trees (Pinus, Acacia and Eucalyptus) to fulfil its timber requirements. With 52.0% of the afforested land in South Africa planted to various eucalypts and their hybrid combinations. Of the total area planted to eucalypts in SA, 75 000 ha is re-established annually by means of silvicultural regimes and operations matched to site productivity, desired end-product and method of regeneration. Unlike other commercially grown tree species, eucalypt species have the ability to coppice after felling. Coppicing is a common form of regeneration in South African forestry as it allows the plantation owner the option of a second timber rotation without replanting. However, if any factors affecting coppicing are compromised, and the site is to be replanted, then it is important to kill the stumps before replanting as rapid initial growth of the coppice shoots will require earlier control than that associated with normal weeding operations. Over time, various methods of woody plant control have been proposed and tested, with most of these making use of herbicides as opposed to the repeated manual removal of coppice regrowth. Globally, most industries subscribe to standards associated with sustainable production (economic, environmental and social) against which they are measured. Within SA, 80% of the forests are certified though either the Forest Stewardship Council (FSC) or International Standards Organisation (ISO) which recommend the identification and avoidance of ‘highly hazardous’ chemicals; the promotion of ‘non-chemical’ methods for pest management as an element of an integrated pest and vegetation management strategy; and the appropriate use of chemicals that are used. To test the current recommendations for killing eucalypt stumps to include other species, the potential of reducing herbicides used, and the influence of time after application on the survival of eucalypt stumps, two trials were initiated at Entabeni plantation (Venda, Limpopo) and one at Wilgeboom plantation (Bushbuckridge, Mpumalanga) between 2018 and 2020. Extending eucalypt cut-stump control practices: Most of the trial work on killing of eucalypts in SA has been conducted on Eucalyptus grandis, Eucalyptus camaldulensis or Eucalyptus macarthurii, with all grown on shorter pulpwood rotations. To extend current recommendation to include Eucalyptus cloeziana (grown on a longer rotation for poles), a trial was established in 2018 at Entabeni plantation (Limpopo Province) to quantify the interaction between Application method (basal-frill; cut-surface; foliar) and Herbicide (no herbicide applied; Roundup; Garlon; Roundup + Garlon) for the killing of 12 year-old stumps following harvesting. Assessments were carried out at 1, 3 and 6 months following application and included Stump survival, Stump quarter with coppice and Coppice heath. Relative to the control plots (100% survival), all herbicides tested were equally effective, 70–90% of the stumps killed. This study confirms previous research regarding the killing of eucalypt stumps. Roundup, Garlon or a combination of two, when applied according to label recommendations to a stump as a basal-frill or cut-surface application (within 30 minutes of felling) resulted in 70-90% of the stumps killed. , Thesis (MSc) -- Faculty of Science, School of Natural Resource Management, 2021
  • Full Text:
  • Date Issued: 2021-12

Perceptions of small-scale vegetable farmers on drought mitigation strategies in the Amathole District Municipality of the Eastern Cape Province

  • Authors: Dingiswayo, Xolisile
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/53676 , vital:45686
  • Description: The present study aimed to investigate perceptions of small-scale vegetable farmers on drought mitigation strategies in the Amathole District Municipality of the Eastern Cape Province. The research objective was to investigate what small-scale vegetable farmers’ perceptions and readiness are in terms of strategies to cope with drought conditions. The study was conducted within the Mbashe, Mnquma, Amahlathi and Great Kei local municipalities of the Eastern Cape. Primary data collection was conducted among 44 small-scale vegetable farmers of the Amathole municipal district. These are farmers who receive social support from the government, are registered with the Department of Rural Development and Agrarian Reform and contribute to the fight against food insecurity in the Amathole district. The primary data was also collected from 13 agricultural extension officers with high experience in advising small-scale farmers residing in the Amathole district. Data collection took place in various local municipalities under Amathole District Municipality, namely: Mbashe, Mnquma, Amahlathi and Great Kei. A multi-method approach was adopted in this study as an appropriate technique to create an improved quality of research which eliminates the deep-rooted bias to either qualitative or quantitative methods alone. A self-administered questionnaires with both closed and open-ended questions – one for the small-scale farmer survey and the second for the extension officer survey – was employed as data collection instrument. The demographic characteristics of small-scale vegetable farmers in the survey area indicated that the present majority of farmers are married male Xhosa farmers between the ages of 56 and 65 years old, with a secondary level of education. The majority of the farmers are typically resource-poor − which implies that the added menace of drought poses the risk that small-scale vegetable farming could decline to mere subsistence level or worse. Drought was found to be a major problem in Mbashe, Mnquma, Amahlathi and Great Kei local municipalities within the Amathole municipal district, with an acute impact on farmers’ production and generation of income. From the data, it emerged that farmers are not sufficiently informed about and do not receive specific training in drought mitigation strategies. Farmers rely on drought alleviation methods but there is a lack of adaptive strategies and timely, long-term ii state intervention. Being resource-poor, these small-scale producers are reliant on natural resources – notably water for irrigating crops. The study established further that there is neither the resources nor sufficient training by and involvement of the extension service. Farmers therefore rely on the use of drought coping mechanisms and drought mitigation techniques and on adapting their production systems. The information-sharing sessions recommended can assist in improving rural livelihoods and the productivity of small-scale vegetable farmers. The absence of engagement of youth in farming means that modern conservation and innovative farming techniques and systems are not implemented towards reducing the impacts of climate change − as well as revitalizing rural areas such Amathole. Access to education about drought, improved drought coping mechanisms and adaptive strategies should be created to facilitate an exchange of traditional and modern agricultural information. The development of infrastructure in rural communities and farming areas is another factor crucial to improving farming systems and operations in the Amathole municipal district. , Thesis (MSc) -- Faculty of Science, School of Natural Resource Management, 2021
  • Full Text: false
  • Date Issued: 2021-12

Plastic particle characterization and concentrations found in the river and marine water environment of Algoa Bay, South Africa

  • Authors: Moss, Kerry-Leigh
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/53874 , vital:46025
  • Description: Only 12% of the world's published plastic research includes references to Africa despite it being a significant contributor to the global plastic waste and mismanagement problem (~88.5% of Africa's plastic waste is mismanaged). Ocean plastics are transported from land by rivers to the sea. However, source contextualization is complex. Many African rivers predominantly run alongside human settlements that host informal waste dumpsites. In this study a simple cost effective, easily deployed, consistent and replicable survey methodology was employed. The study quantified macro plastic in three rivers discharging into Algoa Bay, South Africa. The results indicated that industrial Swartkops and metropolitan Baakens Rivers both illustrate moderate plastic pollution (>3000 plastic particles/day), with the relatively natural Sundays River to showing minimal evidence of river macroplastic (<100 plastic particles/day). The types of plastic were noted using the RIMMEL app (premier African implementation), enabling proportional comparison of different plastic litter types to be completed. , Thesis (MSc) -- Faculty of Science, Oceanography Department,2021
  • Full Text:
  • Date Issued: 2021-12

Plastic particle characterization and concentrations found in the river and marine water environment of Algoa Bay, South Africa

  • Authors: Moss, Kerry-Leigh
  • Date: 2021-12
  • Subjects: Marine pollution , Plastic marine debris --Environmental aspects , Algoa Bay -- Eastern Cape
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/55645 , vital:53403
  • Description: With just 4% of published plastic pollution research, the African region remains one of the most poorly 221 understood areas, leaving a large knowledge gap in our understanding of this global pollution problem 222 (Hurley, Woodward, & Rothwell, 2018). It is estimated that 64 to 90% of the ocean’s plastics originate 223 from fluxes in the terrestrial environment, however determining the exact source is not a simple task 224 (Andrady, 2011; Hurley et al., 2018). Plastic items, including the biodegradable plastic items, 225 breakdown in the marine environment through mechanical action resulting in non-degradable 226 microscopic fragments of synthetic polymers (Thompson et al., 2004). However, the consequences of 227 these microplastic fragments.This research intends to address two aims; first, to provide an estimation of the quantity of plastic 235 transportation via African rivers to the greater body of knowledge of global plastic emissions. This aim 236 will specifically focus on determining plastic output via Port Elizabeth rivers into the Algoa Bay marine 237 environment. The second aim of this research is to quantify and characterize the amount of microplastic 238 in the marine environment of Algoa Bay. The second aim will focus on identifying microplastic (MP) 239 throughout the water column. 240 This research consists of six objectives; first, to identify, design and field test a cost-effective system for 241 monitoring macroplastic quantity output from riverine to marine environments. Second, to contribute to 242 the body of knowledge of African river plastic pollution through quantification and characterisation of 243 macroplastics in the Port Elizabeth rivers. Third, to compare three very different rivers with different 244 levels of urbanisation (industrial, urban, and remote) to ascertain the impact of population and 245 government pollution management protocols on plastic emissions. Fourth, to measure microplastic 246 quantities at three depths from eight locations across the marine environment of Algoa Bay. Fifth, quantitatively characterize the microplastics in Algoa Bay to highlight any patterns of distribution. Sixth, 248 to compare the Algoa Bay concentrations with published international marine microplastic findings. , Thesis (MSc) -- Faculty of Science, Ocean Science, 2021
  • Full Text:
  • Date Issued: 2021-12

Quantifying variability of emissions of greenhouse gas (CO2& CH4) across selected soils and agricultural practices

  • Authors: Sebake, Tebogo Matsimela
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/54107 , vital:46302
  • Description: Increasing concentrations of greenhouse gases (GHG’s)in the atmosphere are warming the planet, and agriculture is responsible for about 30% of these emissions. Soils act as a host for greenhouse gases, since both their storage and emission capacities are large, accounting for two-times the amount of carbon in the atmosphere and in plant and animal life. It sequesters large amounts of carbon, and because agricultural practices depend on soil for production, the practices influence the soil’s ability to store the carbon effectively. Production soils emit greenhouse gas, predominantly carbon dioxide and methane, which are assessed for emissions in this study. Climate change creates unpredictability in precipitation and temperature; farmers need to be flexible and adapt production methods to such environmental changes in order to continue producing sustainably. Global food production needs to grow drastically to meet the projected demands for rising population and diet shifts; studies have shown that feeding a more populated and a more affluent, equal, world will require roughly a doubling of agricultural production by 2050, which means more GHG emissions from the soil. To enable better control on these emissions, their links to agricultural practices need to be better quantified. The study was done in two areas: (1) long-term comparative farming systems research trial with controlled vegetable plots, in the agricultural school of Nelson Mandela University, in George, Western Cape province and (2) long-term wheat research trial of the Free State University, in Bethlehem, Free State province. The objective in study area one is to assess and compare GHG emissions from conventional and organic systems. Temperature and soil moisture were measured during gas samples to establish the influence they have on gas emissions. The objective in study area two is to assess and compare GHG emissions from no-till, plough, and stubble mulch. Stubble mulch refers to crop residue left in place on the land as a surface cover during fallow periods. Two polypropylene canisters are placed in a sampled plot to trap gas emitted from the soil. Analyses of the trapped gases in the headspace gives concentrations of CO2and CH4that was emitted during the duration the canister was closed. The gas is analysed by a G2201-i Picarro gas analyser, presently the only such instrument in South Africa. The analyser’s near-infrared Cavity Ring Down Spectroscopy technology is capable of simultaneous measurements of CO2and CH4down to parts per million. In study area one, conventional plots (R2T6 & R1T6) emitted 65.089ppm CO2and 61.159ppm CO2, and 0.0010ppm CH4and 0.0004ppm CH4, respectively. Organic plots (R1T3 & R2T3) emitted 53.264ppm CO2and 47.885ppm CO2, and 0.0023ppm CH4and 0.0019ppm CH4respectively. Thus, conventional plots emitted 19.98% & 30.98% more CO2than organic plots; but organic plots emitted 81.97% & 155.5% more CH4thanconventional plots. In study area two, ploughed soils emitted 38.727ppm CO2and 0.015ppm CH4, no-tilled soils emitted 31.798ppm CO2 and 0.011ppm CH4andstubble mulched soils emitted 28.373ppm CO2 and 0.009ppm CH4. Thus, ploughed soils emitted 19.65%more CO2than no-tilled soils, no-tilled soils emitted 11.38% more CO2 than stubble mulched soils and ploughed soils emitted 30.36% more CO2 than stubble mulched soils. Ploughed soils emitted 30.77% more CH4 than no-tilled soils, no-tilled soils emitted 20% more CH4 than stubble mulched soils and ploughed soils emitted 50% more CH4than stubble mulched soils. Moist soils result in decreased CO2emissions in conventional plots and increased CH4emissions in organic plots. Increasing temperature patterns are followed by a trend of increasing gas emissions. Reducing GHG emissions from agriculture and developing sustainable tillage practices can help mitigate climate change and increases the chances of stabilizing GHG concentrations and temperature control within a required range. , Thesis (MSc) -- Faculty of Science, School of Environmental Sciences, 2021
  • Full Text:
  • Date Issued: 2021-12

Real-time feedback model for supporting individualised learning of programming students

  • Authors: Keen, Charne
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/53624 , vital:45691
  • Description: Feedback is crucial to the enhancement of the learning and teaching environment, especially in those environments that suffer from a number of extrinsic challenges. The growing demands for educators to provide academic interventions throughout the lecture session and the need for continuous improvement of the quality of university education make it necessary to find and apply more effective and efficient educational technologies and practices based on the correlation of teaching with a student’s conceptual understanding and individual learning preference. Following a combination of Design Science Research (DSR) and Case Study Methodology, this research addresses this problem by designing a technology based real-time feedback (TBRTF) model that can easily be implemented in a South African University. The model designed followed a layered architecture pattern. The architecture describes the data, technology and user support layers of the model. The data support layer incorporates the collection of student academic data and learning preferences. The technology incorporates a machine learning component. The machine learning component covers two technological aspects: the prediction component and the clustering component. This TBRTF model provides the guidelines needed to develop a system that supports individualised real-time feedback in the learning and teaching environment of programming students. The aim of the model is that as the students partake in learning activities where the student data is updated, the monitoring component will fire, updating the probability of failure prediction and in turn the student clusters are regenerated. This will notify the educator of a change and provide decision making support. The student will be allocated individualised feedback in the form of learning materials based on the cluster that the student is allocated to. Through a demonstration and evaluation, this study showed that by following the proposed architecture of the TBRTF model, a model that supports individualised realtime feedback in the learning and teaching environment of programming students can be developed. The validation used an artificial neural network as the prediction component and a k-means clustering algorithm as the clustering component. , Thesis (MSc) -- Faculty of Science, School of Computer Science, Mathematics, Physics and Statistics, 2021
  • Full Text: false
  • Date Issued: 2021-12

Studies on seed germination and response to fertilization of Amaranthus accessions collected in the Eastern Cape Province, South Africa

  • Authors: Ramangoele, Mpaballeng Alinah
  • Date: 2021-12
  • Subjects: Port Elizabeth (South Africa) , Eastern Cape (South Africa) , South Africa
  • Language: English
  • Type: Master's theses , text
  • Identifier: http://hdl.handle.net/10948/54112 , vital:46307
  • Description: Studies were conducted at Döhne Agricultural Development Institute (D.A.D.I.), geographically located between latitude 32°31'34.077"S and longitude 27°27'37.473"E in Stutterheim, Eastern Cape Province from summer 2018 until autumn 2019.The objectives were to determine seed germination and seedling vigour of four local Amaranthus accessions and to evaluate the effect of organic and inorganic fertilization on the growth, yield and nutrient composition. In the germination studies, herein referred to as Experiment 1,laboratory assessments were laid out in a Complete Randomized Design (CRD) replicated four times to test seed germination, seedling emergence and seedling vigour of four Amaranthus accessions namely: A. Hypochondriacus, A. Retroflexus 1, A. Hybridus and A. Retroflexus 2. Data collection included germination percentage, radicle length, co-efficient of velocity of germination and seedling vigour. A.Retroflexus2 gave the highest germination percentage in summer (85%) and autumn (87.75%).Seed weight resulted in the highest germination percentage and was observed to have shown a high positive correlation of {R2=0.91} in summer and{R2=0.92} in autumn respectively. The highest seedling vigour (p<0.001) in summer was attained from A. Hypochondriacus and A. Retroflexus2.In the greenhouse in summer, the highest emergence percentage was observed from A. Hypochondriacus(93.00%), whilst in autumn it was A.Retroflexus2 (88.38%).A. Retroflexus1 was the least performer in both seasons. In summer, A. Hypochondriacus and A. Retroflexus2 resulted in very high seedling vigour. In autumn A. Hypochondriacus, A. Retroflexus2 and A. Hybridus resulted in high seedling vigour and A. Retroflexus1 in moderate seedling vigour. The relationship observed between seed weight and seedling vigour showed a negative (inverse)correlation in summer {R2=0.58} and autumn {R2=0.62}.In Experiment 2, seedlings of A. Hypochondriacus and A. Retroflexus 2were transplanted in 5litrebasal perforated plastic pots which were filled with soil. The experimental layout was a CRD replicated four times. The treatments were: control (no amendment), goat manure, cattle manure and NPK fertilizer. Growth performance data were collected for plant height, the number of leaves and stem girth. In summer, when goat manure was applied both accessions resulted in the tallest plants (78.80cm) yet A. Retroflexus 2 and vA. Hypochondriacus gave the greatest stem girthand highest number of leaves respectively. In autumn, the tallest plants and highest number of leaves were observed from A. Retroflexus 2fertilized with NPK and the greatest stem girth was observed from A. Hypochondriacus fertilized with goat manure. The interaction of fertilization and accessions resulted in A. Retroflexus 2 fertilized with goat manure generating the greatest fresh shoot biomass (137.27g plant-1) and the least from the control. Both accessions fertilized with goat manure attained the greatest dry leaf biomass. Insummer, A.Retroflexus2 outperformed A. Hypochondriacus in calcium content despite the treatments. Unfertilized A. Retroflexus2 produced leaves with high potassium. Both unfertilized accessions showed the highest magnesium content. All A. Retroflexus2 treatments outperformed A. Hypochondriacus treatments on iron content except the control. The summer season was the best in terms of growth and yield of the tested accessions. , Thesis (MSc) -- Faculty of Science, School of Natural Resource Management, 2021
  • Full Text:
  • Date Issued: 2021-12
  • Disclaimer
  • Privacy
  • Copyright
  • Contact