The impact of load and frequency on the biomechanical, physiological and perceptual responses to dynamic pushing
- Authors: Cripwell, Adam Michael
- Date: 2007
- Subjects: Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5144 , http://hdl.handle.net/10962/d1008183 , Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Description: The objective of the present research was to establish the biomechanical, physiological and perceptual responses of male operators to dynamic pushing tasks. The pushing tasks were performed using an industrial pallet jack with varying load/frequency combinations, in a controlled laboratory environment. Thirty healthy male subjects comprised the sample. Experimental procedures were conducted utilising the Chatillon ™ Dynamometer to measure force output in the initial, sustained and ending phases. The K4b2 Ergospirometer was used to assess physiological responses (heart rate and oxygen consumption [V02])' Nine recorded forces and nine experimental conditions formed the basis of this study, with subjects required to push three loads (200kg, 350kg, 500kg) at three frequencies (1120 sec, 1/40 sec, 1/60 sec) at a speed of 3.6km.h-1 over 14 metres on a co-efficient of friction controlled walkway for six minutes. Gait analysis, along with perceptions of exertion (,Central ' and 'Local' RPE) were collected during the third and sixth minutes of each condition . Body discomfort and contribution were identified upon completion of each condition. The results demonstrated that load and frequency interacted to influence responses within each domain. Increasing loads required increased force output during each stage of the push, which had a concomitant effect on physiological and perceptual responses. Significant differences arose between the initial, sustained and ending forces for each load, showing the direct relationship between load and force exertion. The combination of heaviest load/quickest frequency required the greatest physiological output, exceeding recommended guidelines for heart rate, V02 and energy expenditure responses. Intermediate combinations required moderate and acceptable energy cost. Linear relationships were established between heart rate and oxygen consumption , as well as between load and V02 , thus providing industrial practitioners an opportunity to evaluate task demands in situ. The combination of high forces and elevated physiological responses increased the subjective rating of the condition. The results emphasise the need to holistically consider all contributing factors in a dynamic pushing task. Dynamic pushing tasks place biomechanical, physiological and perceptual demands on the human operator, which must be minimised in order to ensure that this form of manual materials handling becomes sustainable in the long term.
- Full Text:
A field investigation of physical workloads imposed on harvesters in South African forestry
- Authors: Christie, Candice Jo-Anne
- Date: 2006
- Subjects: Forests and forestry -- South Africa Employees -- Workload Forest products industry -- South Africa Work -- Physiological aspects Heart rate monitoring Foresters -- South Africa -- Workload Oxygen -- Physiological transport
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5122 , http://hdl.handle.net/10962/d1005200
- Description: The focus of this field investigation was an analysis of the work demands being placed on South African forestry workers, in particular Chainsaw Operators and Stackers. Working postures, physiological and perceptual responses were assessed on a sample of 58 workers (29 Chainsaw Operators and 29 Stackers) during a ‘normal’ working shift. Body mass was measured before and after work in order to determine dehydration levels. Polar heart rate monitors were fitted to six workers each day over a period of two weeks in order to record ‘working’ heart rates. Fluid and food intake was monitored and recorded during this initial data collection phase. The Rating of Perceived Exertion and Body Discomfort Scales were explained in Zulu, their native language, and workers were asked to rate their perceptions of effort at regular intervals during work, while areas and intensity of body discomfort was obtained on completion of work. After completing a work shift, a 30 minute ‘recovery’ period was given, thereafter a portable ergospirometer, the k4b², was attached to the worker who then participated in a progressive, submaximal step test for the purpose of establishing individual, and group, heart rate-oxygen uptake (HR/VO[subscript 2]) regressions for predicting oxygen uptake from ‘working’ heart rate responses. These procedures were repeated four weeks later following the introduction of a fluid and nutritional supplement during work which was delivered to the workers while they were executing their tasks. The results revealed awkward working postures with a predominance of trunk flexion during all the harvesting tasks; these postures, adopted for long periods during work, are very likely to lead to the development of musculoskeletal injuries. The mean working heart rates were 123.3 bt.min[superscript (-1)] and 117.6 bt.min[superscript (-1)] during chainsaw operations and stacking respectively. During the step test, the mean heart rate and oxygen uptake responses were 127.9 bt.min[superscript (-1)] and 22.9 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] (Chainsaw Operators) and 116.9 bt.min[superscript (-1)] and 24.0 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] (Stackers), revealing no significant difference between the ‘working’ heart rates and the heart rates recorded during the step test. Physiological responses were analyzed over the full work shift which was divided into four quarters. Heart rate and oxygen uptake were significantly higher during the last half of the Chainsaw Operators’ work shift compared to the first half. Heart rate increased from 120.7 bt.min[superscript (-1)] during the first quarter to 127.4 bt.min[superscript (-1)] during the last quarter of chainsaw operations. Likewise, oxygen uptake increased from 19.9 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] to 22.9 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] from the first to the last quarter of work. During stacking the heart rate (mean of 117.6 bt.min[superscript (-1)]) and oxygen uptake (mean of 24.6 ml.kg[superscript (-1)].min[superscript (-1)]) responses remained stable over the duration of the working shift. Workers lost, on average, 2.8% body mass during work while felling and cross-cutting and 3.6% during stacking. This reduced significantly to a loss of 0.4% body mass when re-tested following the introduction of water and food during the work period. Likewise, the energy deficit was significantly improved due to the introduction of a nutritional supplement. Pre-intervention the deficit was 8861.8 kJ (Chainsaw Operators) and 8804.2 kJ (Stackers) while in the post-intervention phase this deficit was reduced by approximately 50% for both groups of workers.
- Full Text: