A field investigation into the impact of task demands on worker responses in the South African forestry silviculture sector
- Authors: Parker, Rhiannon Jennifer
- Date: 2014
- Subjects: Forests and forestry -- South Africa -- KwaZulu-Natal , Blue collar workers -- South Africa -- KwaZulu-Natal , Manual work -- South Africa -- KwaZulu-Natal , Work -- Physiological aspects , Human mechanics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5157 , http://hdl.handle.net/10962/d1015645
- Description: Background: In South Africa, limited research has focused on the task demands and workers responses associated with forestry silviculture work, particularly pitting and planting. The methods currently in use are manual, but despite our lack of understanding of the existing demands, advances in forestry engineering have resulted in an introduction of semi-mechanised versions of these tasks. This project aimed to compare the task demands of silviculture tasks using the current manual techniques and the more modern, semi-mechanised techniques. Methods: A holistic investigation focused on the worker characteristics of a sample of black male pitters and black female planters from the Kwa-Zulu Natal forestry industry, as well as biomechanical (spinal kinematics and L5/S1 forces), physiological (heart rate, oxygen consumption and energy expenditure) and psychophysical (ratings of perceived exertion and body discomfort) responses associated with manual and semi-mechanised pitting and planting. Results: The pitting task saw significant improvements in the spinal kinematic measures as a result of the increased mechanisation, with eight of the 16 recorded variables decreasing to a lower level of risk classification. Physiologically, the manual task was associated with a mean heart rate of 157 bt.min⁻¹ and absolute energy expenditure of 11.27 kcal.min⁻¹, which were not found to be significantly different to the values of 143 bt.min⁻¹ and 9.8 kcal.min⁻¹ recorded during the semi-mechanised technique. Psychophysical responses indicated that the workers perceived manual pitting to be more physically demanding than the semi-mechanised method. The manual and semi-mechanised planting tasks were, in general, found to be acceptable from a spinal kinematics perspective, with the majority of variables classified as low risk. However, the maximum sagittal angle was reduced by more than 20 degrees as a result of the new equipment. The physiological and psychophysical demands associated with manual planting were found to be within acceptable limits. Conclusion: In terms of pitting, it can tentatively be concluded that the semi-mechanised technique is better than the manual one, based on the biomechanical and psychophysical findings, however physiological demands require further investigation. When considering the planting techniques, the semi-mechanised method showed a slight improvement from the biomechanical perspective, but further physiological and psychophysical investigations are needed.
- Full Text:
- Date Issued: 2014
- Authors: Parker, Rhiannon Jennifer
- Date: 2014
- Subjects: Forests and forestry -- South Africa -- KwaZulu-Natal , Blue collar workers -- South Africa -- KwaZulu-Natal , Manual work -- South Africa -- KwaZulu-Natal , Work -- Physiological aspects , Human mechanics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5157 , http://hdl.handle.net/10962/d1015645
- Description: Background: In South Africa, limited research has focused on the task demands and workers responses associated with forestry silviculture work, particularly pitting and planting. The methods currently in use are manual, but despite our lack of understanding of the existing demands, advances in forestry engineering have resulted in an introduction of semi-mechanised versions of these tasks. This project aimed to compare the task demands of silviculture tasks using the current manual techniques and the more modern, semi-mechanised techniques. Methods: A holistic investigation focused on the worker characteristics of a sample of black male pitters and black female planters from the Kwa-Zulu Natal forestry industry, as well as biomechanical (spinal kinematics and L5/S1 forces), physiological (heart rate, oxygen consumption and energy expenditure) and psychophysical (ratings of perceived exertion and body discomfort) responses associated with manual and semi-mechanised pitting and planting. Results: The pitting task saw significant improvements in the spinal kinematic measures as a result of the increased mechanisation, with eight of the 16 recorded variables decreasing to a lower level of risk classification. Physiologically, the manual task was associated with a mean heart rate of 157 bt.min⁻¹ and absolute energy expenditure of 11.27 kcal.min⁻¹, which were not found to be significantly different to the values of 143 bt.min⁻¹ and 9.8 kcal.min⁻¹ recorded during the semi-mechanised technique. Psychophysical responses indicated that the workers perceived manual pitting to be more physically demanding than the semi-mechanised method. The manual and semi-mechanised planting tasks were, in general, found to be acceptable from a spinal kinematics perspective, with the majority of variables classified as low risk. However, the maximum sagittal angle was reduced by more than 20 degrees as a result of the new equipment. The physiological and psychophysical demands associated with manual planting were found to be within acceptable limits. Conclusion: In terms of pitting, it can tentatively be concluded that the semi-mechanised technique is better than the manual one, based on the biomechanical and psychophysical findings, however physiological demands require further investigation. When considering the planting techniques, the semi-mechanised method showed a slight improvement from the biomechanical perspective, but further physiological and psychophysical investigations are needed.
- Full Text:
- Date Issued: 2014
Cardiovascular disease risk in Black African females and the efficacy of a walking programme on blood pressure in a sub-sample
- Authors: Crymble, Tegan
- Date: 2014
- Subjects: Cardiovascular system -- Diseases -- South Africa -- Eastern Cape , Women -- Health and hygiene -- South Africa -- Eastern Cape , Obesity -- South Africa -- Eastern Cape , Hypertension -- South Africa -- Eastern Cape , Walking -- South Africa -- Eastern Cape -- Physiological aspects , Lifestyles -- Health aspects -- South Africa -- Eastern Cape , Health attitudes -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5152 , http://hdl.handle.net/10962/d1013234
- Description: The purpose of the study was to investigate the cardiovascular disease (CVD) risk profile of black African females in the Makana region, Eastern Cape, South Africa. Baseline measures from 40 participants, who met the criteria, were compared against the 2003 South African Demographic and Health Survey (SADHS) and the 2013 South African National Health and Nutritional Examination Survey (SANHANES-1). The risk factors measured were anthropometric (stature, body mass and body mass index (BMI)), morphological (waist circumference (WC), fat mass and lean mass), cardiovascular (heart rate and blood pressure (BP)), physical activity (step count and energy expenditure), biochemical (glycated haemoglobin and full blood lipid profile) and behavioural (alcohol and tobacco use). Results showed significantly higher (p≤0.05) values for overweight/obesity (BMI 37.60 kg.m⁻²; WC 1130.58 mm; fat mass 45.23%) and high BP (130/88 mmHg) compared to the previous national surveys, highlighting these CVD risk factors as problematic. The subsequent sub-study aimed to assess the efficacy of a pedometer-based walking intervention on high BP. The walking programme (n=25) was based on individual step goals to be completed at a moderate-intensity on five days.week⁻¹ for 12 weeks. The same measurements were taken at monthly intervals, Week 0, Week 4, Week 8 and Week 12, with the addition of dietary intake and fitness level, and the exclusion of the behavioural variables. There were no significant differences (p≤0.05) in systolic and diastolic BP with the exercise intervention, although there was a strong, negative relationship with time for diastolic BP (r²=0.9857). This trend suggests that the lack of significance may be a result of poor compliance and/or the small sample size. Individual results, however, showed no compliance-result relationship for the two risk factors of interest: overweight/obesity and high BP. Future recommendations include supervised or group-based exercise interventions to improve compliance, and the addition of resistance training to the aerobic programme.
- Full Text:
- Date Issued: 2014
- Authors: Crymble, Tegan
- Date: 2014
- Subjects: Cardiovascular system -- Diseases -- South Africa -- Eastern Cape , Women -- Health and hygiene -- South Africa -- Eastern Cape , Obesity -- South Africa -- Eastern Cape , Hypertension -- South Africa -- Eastern Cape , Walking -- South Africa -- Eastern Cape -- Physiological aspects , Lifestyles -- Health aspects -- South Africa -- Eastern Cape , Health attitudes -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5152 , http://hdl.handle.net/10962/d1013234
- Description: The purpose of the study was to investigate the cardiovascular disease (CVD) risk profile of black African females in the Makana region, Eastern Cape, South Africa. Baseline measures from 40 participants, who met the criteria, were compared against the 2003 South African Demographic and Health Survey (SADHS) and the 2013 South African National Health and Nutritional Examination Survey (SANHANES-1). The risk factors measured were anthropometric (stature, body mass and body mass index (BMI)), morphological (waist circumference (WC), fat mass and lean mass), cardiovascular (heart rate and blood pressure (BP)), physical activity (step count and energy expenditure), biochemical (glycated haemoglobin and full blood lipid profile) and behavioural (alcohol and tobacco use). Results showed significantly higher (p≤0.05) values for overweight/obesity (BMI 37.60 kg.m⁻²; WC 1130.58 mm; fat mass 45.23%) and high BP (130/88 mmHg) compared to the previous national surveys, highlighting these CVD risk factors as problematic. The subsequent sub-study aimed to assess the efficacy of a pedometer-based walking intervention on high BP. The walking programme (n=25) was based on individual step goals to be completed at a moderate-intensity on five days.week⁻¹ for 12 weeks. The same measurements were taken at monthly intervals, Week 0, Week 4, Week 8 and Week 12, with the addition of dietary intake and fitness level, and the exclusion of the behavioural variables. There were no significant differences (p≤0.05) in systolic and diastolic BP with the exercise intervention, although there was a strong, negative relationship with time for diastolic BP (r²=0.9857). This trend suggests that the lack of significance may be a result of poor compliance and/or the small sample size. Individual results, however, showed no compliance-result relationship for the two risk factors of interest: overweight/obesity and high BP. Future recommendations include supervised or group-based exercise interventions to improve compliance, and the addition of resistance training to the aerobic programme.
- Full Text:
- Date Issued: 2014
Impact of batting skill on pacing during repeated sprints between the wickets.
- Authors: Elliott, Andrea
- Date: 2014
- Subjects: Cricket -- Batting -- Research , Sprinting -- Research , Cricket players , Exercise -- Physiological aspects -- Research , Sports -- Physiological aspects -- Research
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5153 , http://hdl.handle.net/10962/d1013546
- Description: Introduction: With batting in cricket, there is no known end point, making the allocation of resources and the development of a suitable pacing strategy more difficult. How batsmen allocate resources and pace themselves when repeatedly sprinting between the wickets is therefore not known. According to the ‘anticipatory feedback’ model, the level of expertise/experience has a substantial influence on the development of a suitable pacing strategy. Skilled or experienced batsmen may therefore have a greater ability to develop and implement a pacing strategy compared to that of novice or less-skilled batsmen. Purpose: To assess whether the absence of a known end point at the beginning of repeated sprint bouts between the wickets effects how batsmen pace themselves comparing skilled and less-skilled batsmen. Methods: Twenty-four male cricketers from a university league were selected. Twelve skilled batsmen (players in the top five batting order), and 12 less-skilled batsmen (players in the bottom five batting order) completed three experimental. All trials required batsmen to complete the same number of shuttle sprints (14 shuttles and therefore 28 runs), while only the information provided before each trial differed. Control Trial: This trial is also referred to as the ‘informed’ trial as the batsmen are aware of the exercise requirements (end point). Unknown Trial: The batsmen were not informed of the exercise end point and were required to run on command for an indefinite period (28 runs). Deceptive Trial: Batsmen’ were incorrectly informed with regards to the number of sprints (told they were only doing 14 runs when in fact they were doing 28 runs). Muscle activity, sprint times and RPE measures were obtained during all three trials and compared. Results: Significant (p<0.05) group effects were apparent for sprint times and, ‘central’ and ‘local’ RPE. Specifically, skilled batsmen obtained the faster mean sprint times, and less-skilled batsmen reported the higher mean ‘central’ and ‘local’ RPE values in all three experimental trials. There were no significant group effects for muscle activation. Skilled batsmen did however have lower muscle activation compared to less-skilled batsmen in all three trials. Furthermore, general trends revealed that sprint times and muscle activation decreased over time (from shuttle 1 to shuttle 14), and RPE (‘central’ and ‘local’) ratings increased, regardless of the experimental trials. Skilled batsmen performed the best in all three trials. This was determined by the attainment of faster sprint times, lower muscle activation and low RPE ratings in each of the three trials. The assessment of the relationship of the dependent variables measured in each trial, did however suggest that skilled batsmen performed best in the deceptive trial while less-skilled batsmen performed best in the control trial. Skilled batsmen thus showed superior performance when trial requirements were unclear. Less-skilled batsmen however, were seen to experience decrements in performance when information regarding the end point was unknown or misleading. Conclusion: It can thus be concluded that previous experience facilitates in the obtainment of improved sprint times between the wickets, especially when the exact end point is unknown.
- Full Text:
- Date Issued: 2014
- Authors: Elliott, Andrea
- Date: 2014
- Subjects: Cricket -- Batting -- Research , Sprinting -- Research , Cricket players , Exercise -- Physiological aspects -- Research , Sports -- Physiological aspects -- Research
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5153 , http://hdl.handle.net/10962/d1013546
- Description: Introduction: With batting in cricket, there is no known end point, making the allocation of resources and the development of a suitable pacing strategy more difficult. How batsmen allocate resources and pace themselves when repeatedly sprinting between the wickets is therefore not known. According to the ‘anticipatory feedback’ model, the level of expertise/experience has a substantial influence on the development of a suitable pacing strategy. Skilled or experienced batsmen may therefore have a greater ability to develop and implement a pacing strategy compared to that of novice or less-skilled batsmen. Purpose: To assess whether the absence of a known end point at the beginning of repeated sprint bouts between the wickets effects how batsmen pace themselves comparing skilled and less-skilled batsmen. Methods: Twenty-four male cricketers from a university league were selected. Twelve skilled batsmen (players in the top five batting order), and 12 less-skilled batsmen (players in the bottom five batting order) completed three experimental. All trials required batsmen to complete the same number of shuttle sprints (14 shuttles and therefore 28 runs), while only the information provided before each trial differed. Control Trial: This trial is also referred to as the ‘informed’ trial as the batsmen are aware of the exercise requirements (end point). Unknown Trial: The batsmen were not informed of the exercise end point and were required to run on command for an indefinite period (28 runs). Deceptive Trial: Batsmen’ were incorrectly informed with regards to the number of sprints (told they were only doing 14 runs when in fact they were doing 28 runs). Muscle activity, sprint times and RPE measures were obtained during all three trials and compared. Results: Significant (p<0.05) group effects were apparent for sprint times and, ‘central’ and ‘local’ RPE. Specifically, skilled batsmen obtained the faster mean sprint times, and less-skilled batsmen reported the higher mean ‘central’ and ‘local’ RPE values in all three experimental trials. There were no significant group effects for muscle activation. Skilled batsmen did however have lower muscle activation compared to less-skilled batsmen in all three trials. Furthermore, general trends revealed that sprint times and muscle activation decreased over time (from shuttle 1 to shuttle 14), and RPE (‘central’ and ‘local’) ratings increased, regardless of the experimental trials. Skilled batsmen performed the best in all three trials. This was determined by the attainment of faster sprint times, lower muscle activation and low RPE ratings in each of the three trials. The assessment of the relationship of the dependent variables measured in each trial, did however suggest that skilled batsmen performed best in the deceptive trial while less-skilled batsmen performed best in the control trial. Skilled batsmen thus showed superior performance when trial requirements were unclear. Less-skilled batsmen however, were seen to experience decrements in performance when information regarding the end point was unknown or misleading. Conclusion: It can thus be concluded that previous experience facilitates in the obtainment of improved sprint times between the wickets, especially when the exact end point is unknown.
- Full Text:
- Date Issued: 2014
Strength training and cardiovascular risk post-menses, with particular emphasis on the plasma lipoproteins: a controlled trial
- Authors: Viljoen, Janet Erica
- Date: 2014
- Subjects: Weight training for women -- Physiological aspects , Exercise for women -- Physiological aspects , Middle-aged women -- Health and hygiene , Cardiovascular system -- Diseases , Hypercholesteremia , Blood lipoproteins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5155 , http://hdl.handle.net/10962/d1013578
- Description: Introduction: Cardiovascular disease affects a greater proportion of females than it does males, and is responsible for an estimated 52 percent of female deaths per annum, globally. Due to the loss of oestrogen associated with the menopause, post-menopausal females are at elevated risk for hypercholesterolaemia which is a primary risk factor for cardiovascular disease. It has not yet been conclusively established whether resistance training can be used to ameliorate hypercholesterolaemia. Aim: This randomized controlled trial investigated what effect 12 weeks of progressive resistance training would have on plasma lipoproteins in a sample of post-menopausal females. Methods: Caucasian women (n=30 intervention and n=18 control) between the ages of 55 and 65 years who were not taking hormone replacement therapy were recruited. Participants did not smoke, were sedentary, were not taking any form of cholesterol-lowering medication, had at least one cholesterol abnormality at baseline but were otherwise healthy and able to participate in a strength training programme. Following extensive medical pre-screening, information dissemination and voluntary consent, the sample was divided into two groups. The exercise sample undertook 12 weeks of resistance training on five days of the week. The control group received no intervention. Measurements were obtained at baseline and every four weeks thereafter and included measures of strength, biochemistry (oestradiol, testosterone, full blood lipid profile, glycated haemoglobin and sex hormone binding globulin), anthropometry, morphology and self-reports (dietary intake, energy expenditure and the profile of mood states questionnaire). Results: There was no change to low density lipoprotein cholesterol, high density lipoprotein cholesterol, triglyceride content or total cholesterol as a result of the intervention. Back, chest and leg strength increased significantly (p<0.01) (increases of 51 percent, 35 percent and 43 percent respectively from baseline); waist circumference dropped (p<0.01) by 5 percent overall and diastolic blood pressure decreased significantly (-9 percent, p<0.01) in the exercise cohort but no change was noted in the matched control. Dietary intake, energy expenditure and body mass remained unchanged in both samples. Morphology (sum of skinfolds, estimated body fat content and girth measures) did not change and nor did other biochemical measures (HbA1c and sex hormone binding globulin) or hormone levels (oestradiol and testosterone). Despite the lack of overall change, an important finding was noted in individual results where a clear indication of ‘responders’ and ‘non-responders’ emerged. Conclusion: Overall mean results suggest that 12 weeks resistance training undertaken five days of the week was ineffective in reducing hypercholesterolaemia in this sample. Despite there being no identifying characteristics determined in this sample, evidence of responders and non-responders to the intervention indicates that reliance on mean data may not be sufficient when analysing data from exercise interventions. Therefore, while progressive resistance training had a positive effect on strength, waist circumference and diastolic blood pressure, it did not positively influence the plasma lipoproteins in this cohort of post-menopausal women. , Maiden name: Kelly, Janet Erica
- Full Text:
- Date Issued: 2014
- Authors: Viljoen, Janet Erica
- Date: 2014
- Subjects: Weight training for women -- Physiological aspects , Exercise for women -- Physiological aspects , Middle-aged women -- Health and hygiene , Cardiovascular system -- Diseases , Hypercholesteremia , Blood lipoproteins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5155 , http://hdl.handle.net/10962/d1013578
- Description: Introduction: Cardiovascular disease affects a greater proportion of females than it does males, and is responsible for an estimated 52 percent of female deaths per annum, globally. Due to the loss of oestrogen associated with the menopause, post-menopausal females are at elevated risk for hypercholesterolaemia which is a primary risk factor for cardiovascular disease. It has not yet been conclusively established whether resistance training can be used to ameliorate hypercholesterolaemia. Aim: This randomized controlled trial investigated what effect 12 weeks of progressive resistance training would have on plasma lipoproteins in a sample of post-menopausal females. Methods: Caucasian women (n=30 intervention and n=18 control) between the ages of 55 and 65 years who were not taking hormone replacement therapy were recruited. Participants did not smoke, were sedentary, were not taking any form of cholesterol-lowering medication, had at least one cholesterol abnormality at baseline but were otherwise healthy and able to participate in a strength training programme. Following extensive medical pre-screening, information dissemination and voluntary consent, the sample was divided into two groups. The exercise sample undertook 12 weeks of resistance training on five days of the week. The control group received no intervention. Measurements were obtained at baseline and every four weeks thereafter and included measures of strength, biochemistry (oestradiol, testosterone, full blood lipid profile, glycated haemoglobin and sex hormone binding globulin), anthropometry, morphology and self-reports (dietary intake, energy expenditure and the profile of mood states questionnaire). Results: There was no change to low density lipoprotein cholesterol, high density lipoprotein cholesterol, triglyceride content or total cholesterol as a result of the intervention. Back, chest and leg strength increased significantly (p<0.01) (increases of 51 percent, 35 percent and 43 percent respectively from baseline); waist circumference dropped (p<0.01) by 5 percent overall and diastolic blood pressure decreased significantly (-9 percent, p<0.01) in the exercise cohort but no change was noted in the matched control. Dietary intake, energy expenditure and body mass remained unchanged in both samples. Morphology (sum of skinfolds, estimated body fat content and girth measures) did not change and nor did other biochemical measures (HbA1c and sex hormone binding globulin) or hormone levels (oestradiol and testosterone). Despite the lack of overall change, an important finding was noted in individual results where a clear indication of ‘responders’ and ‘non-responders’ emerged. Conclusion: Overall mean results suggest that 12 weeks resistance training undertaken five days of the week was ineffective in reducing hypercholesterolaemia in this sample. Despite there being no identifying characteristics determined in this sample, evidence of responders and non-responders to the intervention indicates that reliance on mean data may not be sufficient when analysing data from exercise interventions. Therefore, while progressive resistance training had a positive effect on strength, waist circumference and diastolic blood pressure, it did not positively influence the plasma lipoproteins in this cohort of post-menopausal women. , Maiden name: Kelly, Janet Erica
- Full Text:
- Date Issued: 2014
The effects of age on the worker capacity and mechanisation on the task demands in a South African manufacturing industry
- Bezuidenhout, Samantha Catherine
- Authors: Bezuidenhout, Samantha Catherine
- Date: 2014
- Subjects: Age and employment -- South Africa , Labor -- Social aspects -- South Africa , Brickmaking -- South Africa -- Automation , Brickmaking -- Social aspects -- South Africa , Brick trade -- South Africa , Aging -- Social aspects -- South Africa , Aging -- Research
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5151 , http://hdl.handle.net/10962/d1013167
- Description: The focus of the study was two-fold, firstly to determine the effect of age on the capacity of manual materials handling workers and secondly to determine the effect of increasing task mechanisation on the workers’ responses to task demands. The first component of this study, namely Part I, 101 male and 12 female ‘unskilled’ manual workers – of various ages – from a brick manufacturing industry were assessed. Anthropometric, health and strength factors were measured to improve the understanding of the South African manual worker capacity and more specifically, the effect of age on this capacity. Data collection was done between 7.30am and 9.30am in a laboratory-type setting on-site. Anthropometric characteristics (including body mass index, waist to hip ratio, waist circumference and body fat percentage) provided information on the state of obesity and the impact of age in the South African context. Linked to this, the health factors (including blood pressure, resting heart rate and a self-reported questionnaire) provide an extra snapshot of the disease profile in South Africa, and could potentially influence other capacity factors. Isometric strength capacities (of eight different areas, namely: back, leg, bicep, shoulder, pinch, pinch and pull) demonstrated whether South African manual workers show the same decline in strength with aging as seen in industrially advanced countries. The second component of the study, Part II, was performed in situ and measured the workers’ responses to task demands of three brick palletising tasks, one manual (n=21) and two with increasing mechanisation (n=12 each). Spinal kinematics, joint forces and working heart rate were assessed on normal work days during a 30-lift duration and body discomfort measures were taken at the start, middle and end of the work-shift. Spinal kinematics were measured dynamically using a lumbar motion monitor, whereas the spinal forces were estimated using the three dimensional static strength prediction program. The worker capacity results showed that waist to hip ratio, waist circumference and body fat percentage increased significantly with aging, whereas body mass index was not affected by age. All body morphology values were within ‘normal’ ranges. Although diastolic blood pressure increased significantly with age, systolic was not affected significantly by age. Both groups, however, showed an increasing prevalence of hypertension with aging. There were no significant changes in resting heart rate with aging, with a range of 66 bt.min⁻¹ to 74.86 bt.min⁻¹, therefore within normal ranges. Of the strength factors, age only affected shoulder and push strength significantly: Showing a decrease in shoulder strength from 49.89 kgF to 39.91 kgF in the men aged 20-29 to the 50-59 respectively and an increase in push strength from men aged 30-39 and 40-49 to those aged 50-59. Part II results revealed highly frequent lift rates and large degrees of sagittal flexion and lateral bending in all three tasks. These postures adopted for long durations are likely to lead to the development of musculoskeletal disorders. Heart rates of workers from the three tasks were significantly different and heart rates for two tasks were above the recommended 110 bt.min⁻¹. Similarly the body discomfort ratings of the three tasks differed, although a common trend was seen in that lower back pain was the most commonly reported area of discomfort in all tasks. South African manual materials handling males did not show the same responses to aging as men from industrially advanced countries, calling for further research into these differences. Due to the high risks of the three tasks assessed, future research and interventions are required to reduce the risk of injury in the assessed tasks.
- Full Text:
- Date Issued: 2014
- Authors: Bezuidenhout, Samantha Catherine
- Date: 2014
- Subjects: Age and employment -- South Africa , Labor -- Social aspects -- South Africa , Brickmaking -- South Africa -- Automation , Brickmaking -- Social aspects -- South Africa , Brick trade -- South Africa , Aging -- Social aspects -- South Africa , Aging -- Research
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5151 , http://hdl.handle.net/10962/d1013167
- Description: The focus of the study was two-fold, firstly to determine the effect of age on the capacity of manual materials handling workers and secondly to determine the effect of increasing task mechanisation on the workers’ responses to task demands. The first component of this study, namely Part I, 101 male and 12 female ‘unskilled’ manual workers – of various ages – from a brick manufacturing industry were assessed. Anthropometric, health and strength factors were measured to improve the understanding of the South African manual worker capacity and more specifically, the effect of age on this capacity. Data collection was done between 7.30am and 9.30am in a laboratory-type setting on-site. Anthropometric characteristics (including body mass index, waist to hip ratio, waist circumference and body fat percentage) provided information on the state of obesity and the impact of age in the South African context. Linked to this, the health factors (including blood pressure, resting heart rate and a self-reported questionnaire) provide an extra snapshot of the disease profile in South Africa, and could potentially influence other capacity factors. Isometric strength capacities (of eight different areas, namely: back, leg, bicep, shoulder, pinch, pinch and pull) demonstrated whether South African manual workers show the same decline in strength with aging as seen in industrially advanced countries. The second component of the study, Part II, was performed in situ and measured the workers’ responses to task demands of three brick palletising tasks, one manual (n=21) and two with increasing mechanisation (n=12 each). Spinal kinematics, joint forces and working heart rate were assessed on normal work days during a 30-lift duration and body discomfort measures were taken at the start, middle and end of the work-shift. Spinal kinematics were measured dynamically using a lumbar motion monitor, whereas the spinal forces were estimated using the three dimensional static strength prediction program. The worker capacity results showed that waist to hip ratio, waist circumference and body fat percentage increased significantly with aging, whereas body mass index was not affected by age. All body morphology values were within ‘normal’ ranges. Although diastolic blood pressure increased significantly with age, systolic was not affected significantly by age. Both groups, however, showed an increasing prevalence of hypertension with aging. There were no significant changes in resting heart rate with aging, with a range of 66 bt.min⁻¹ to 74.86 bt.min⁻¹, therefore within normal ranges. Of the strength factors, age only affected shoulder and push strength significantly: Showing a decrease in shoulder strength from 49.89 kgF to 39.91 kgF in the men aged 20-29 to the 50-59 respectively and an increase in push strength from men aged 30-39 and 40-49 to those aged 50-59. Part II results revealed highly frequent lift rates and large degrees of sagittal flexion and lateral bending in all three tasks. These postures adopted for long durations are likely to lead to the development of musculoskeletal disorders. Heart rates of workers from the three tasks were significantly different and heart rates for two tasks were above the recommended 110 bt.min⁻¹. Similarly the body discomfort ratings of the three tasks differed, although a common trend was seen in that lower back pain was the most commonly reported area of discomfort in all tasks. South African manual materials handling males did not show the same responses to aging as men from industrially advanced countries, calling for further research into these differences. Due to the high risks of the three tasks assessed, future research and interventions are required to reduce the risk of injury in the assessed tasks.
- Full Text:
- Date Issued: 2014
Validation of an assessment tool for mental fatigue applied to rotational shift work
- Authors: Huysamen, Kirsten Christina
- Date: 2014
- Subjects: Mental fatigue , Shift systems , Performance , Motor ability , Memory
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5154 , http://hdl.handle.net/10962/d1013551
- Description: Mental fatigue has been proven to be highly prominent during shift work, due to long, irregular working hours and disruption of the circadian rhythm. Measuring mental fatigue has been a challenge for many years, where commonly cognitive test tasks are used to assess mental fatigue. Moreover, these test tasks do not isolate where fatigue is occurring during human information processing. The human information processing system consists of four core stages, each of which requires numerous cognitive functions in order to process information. The Human Kinetics and Ergonomics Department at Rhodes University has developed six cognitive test tasks where each isolates a cognitive function: an accommodation test task, a visual detection test task, a reading test task, a memory test task, a tapping test task and a neural control test task. The cognitive functions include: eye accommodation, visual discrimination, visual pattern recognition, memory duration, motor programming and peripheral neural control. General task-related effect can also be examined for each of these cognitive test tasks which include choice reaction time, visual detection, reading performance, short-term memory, motor control and tracking performance. Additionally, a simple reaction time test task has been developed to analyse simple reaction time. This test task does not isolate a cognitive function. One or more parameters can be examined for each cognitive function and task-related effect. The first aim of this study was to validate numerous cognitive test tasks for mental fatigue in a simulated shift work laboratory setting. The second aim was to assess the validated cognitive test tasks in Phase 1 in a field-based rotational shift work setting. Parameters revealing sensitivity to mental fatigue would be validated for mental fatigue applied to rotational shift work and would be inserted into an assessment tool. In the laboratory setting, the seven cognitive test tasks were examined on four different types of shift work regimes. The first regime was a standard eight-hour shift work system, and the other three were non-conventional shift work regimes. Participants (n = 12 per regime) were required to complete one day shift followed by four night shifts, where testing occurred before and after each shift and four times within each shift. The cognitive test tasks revealing sensitivity to fatigue included: visual detection test task, reading test task, memory test task, tapping test task, neural control test task and simple reaction time test task. The testing of Phase 2 was conducted in three different companies, where each performed a different type of rotational shift work. The six cognitive test tasks validated for mental fatigue in Phase 1 were tested before and after work for each shift type within the rotational shift work system adopted by each company. Company A (n = 18) and Company B (n = 24) performed two-shift rotational shift work systems, where the shift length of Company A was 12-hours and the shift length of Company B was irregular hours. Company C (n = 21) performed an eight-hour three-shift rotational shift work system. Nine parameters revealed fatiguing effects and were inserted into the assessment tool, five of which provided information on a specific cognitive function: error rate for visual discrimination, processing time for visual pattern recognition, error rate for visual pattern recognition, impact of rehearsal time on memory recall rate for memory duration and the high-precision condition for motor programming time. The remaining four parameters provided information on general task-related effects: reading speed for reading performance, recall rate for short-term memory, reaction time for motor control and simple reaction time. Therefore, an assessment tool comprising nine parameters was validated for mental fatigue applied to rotational shift work, where five of the parameters were able to isolate exactly where fatigue was occurring during human information processing and the other four parameters were able to assess fatigue occurring throughout the human information processing chain.
- Full Text:
- Date Issued: 2014
- Authors: Huysamen, Kirsten Christina
- Date: 2014
- Subjects: Mental fatigue , Shift systems , Performance , Motor ability , Memory
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5154 , http://hdl.handle.net/10962/d1013551
- Description: Mental fatigue has been proven to be highly prominent during shift work, due to long, irregular working hours and disruption of the circadian rhythm. Measuring mental fatigue has been a challenge for many years, where commonly cognitive test tasks are used to assess mental fatigue. Moreover, these test tasks do not isolate where fatigue is occurring during human information processing. The human information processing system consists of four core stages, each of which requires numerous cognitive functions in order to process information. The Human Kinetics and Ergonomics Department at Rhodes University has developed six cognitive test tasks where each isolates a cognitive function: an accommodation test task, a visual detection test task, a reading test task, a memory test task, a tapping test task and a neural control test task. The cognitive functions include: eye accommodation, visual discrimination, visual pattern recognition, memory duration, motor programming and peripheral neural control. General task-related effect can also be examined for each of these cognitive test tasks which include choice reaction time, visual detection, reading performance, short-term memory, motor control and tracking performance. Additionally, a simple reaction time test task has been developed to analyse simple reaction time. This test task does not isolate a cognitive function. One or more parameters can be examined for each cognitive function and task-related effect. The first aim of this study was to validate numerous cognitive test tasks for mental fatigue in a simulated shift work laboratory setting. The second aim was to assess the validated cognitive test tasks in Phase 1 in a field-based rotational shift work setting. Parameters revealing sensitivity to mental fatigue would be validated for mental fatigue applied to rotational shift work and would be inserted into an assessment tool. In the laboratory setting, the seven cognitive test tasks were examined on four different types of shift work regimes. The first regime was a standard eight-hour shift work system, and the other three were non-conventional shift work regimes. Participants (n = 12 per regime) were required to complete one day shift followed by four night shifts, where testing occurred before and after each shift and four times within each shift. The cognitive test tasks revealing sensitivity to fatigue included: visual detection test task, reading test task, memory test task, tapping test task, neural control test task and simple reaction time test task. The testing of Phase 2 was conducted in three different companies, where each performed a different type of rotational shift work. The six cognitive test tasks validated for mental fatigue in Phase 1 were tested before and after work for each shift type within the rotational shift work system adopted by each company. Company A (n = 18) and Company B (n = 24) performed two-shift rotational shift work systems, where the shift length of Company A was 12-hours and the shift length of Company B was irregular hours. Company C (n = 21) performed an eight-hour three-shift rotational shift work system. Nine parameters revealed fatiguing effects and were inserted into the assessment tool, five of which provided information on a specific cognitive function: error rate for visual discrimination, processing time for visual pattern recognition, error rate for visual pattern recognition, impact of rehearsal time on memory recall rate for memory duration and the high-precision condition for motor programming time. The remaining four parameters provided information on general task-related effects: reading speed for reading performance, recall rate for short-term memory, reaction time for motor control and simple reaction time. Therefore, an assessment tool comprising nine parameters was validated for mental fatigue applied to rotational shift work, where five of the parameters were able to isolate exactly where fatigue was occurring during human information processing and the other four parameters were able to assess fatigue occurring throughout the human information processing chain.
- Full Text:
- Date Issued: 2014
- «
- ‹
- 1
- ›
- »