The effect of restricted environments on selected postural, physiological and perceptual responses
- Authors: Wolfe, Amy
- Date: 2008
- Subjects: Human engineering , Posture , Human mechanics , Work environment , Human beings -- Effect of environment on , Musculoskeletal system -- Wounds and injuries , Industrial safety , Work -- Physiological aspects , Stress (Physiology)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5115 , http://hdl.handle.net/10962/d1005193 , Human engineering , Posture , Human mechanics , Work environment , Human beings -- Effect of environment on , Musculoskeletal system -- Wounds and injuries , Industrial safety , Work -- Physiological aspects , Stress (Physiology)
- Description: Manual lifting tasks are the predominant means of transporting materials in industry with many of these tasks being performed in confined spaces. Research has tended to focus on the biomechanical implications of working in small spaces with a decided lack of information about the physiological and perceptual responses in these environments. This holistic study therefore investigated the manner in which the human operator responded to conditions where the ceiling height was lowered and reach demands increased. Thirty-two young physically active male subjects (age: 21.55yr; stature: 1810mm) were recruited to complete a 2-way repeated measures experiment during which four lifting protocols where different combinations of ceiling height (‘normal’ or reduced to 1460mm in height) and reach demands (400mm or 800mm) were tested. A crude postural analysis was conducted while physiological responses were detailed and continuously monitored. Perceptual responses were also assessed. The tasks with a ‘normal’ ceiling height (mean compression forces: 2615N; mean shearing forces: 388N) and the greatest reach distance (mean compression forces: 3655N; mean shearing forces: 386N) placed individuals under the highest strain. Mean heart rate (HR) responses were significantly lower (p < 0.05) in the URN condition when compared to the RF condition. Furthermore, HR responses were statistically significantly affected by the height of the ceiling and the reach depth. Statistically significant differences (p< 0.05) in mean tidal volume (VT) occurred in the least (URN) and most (RF) restrictive conditions. Statistically significant differences (p < 0.05) in mean VE were evident between URN and URF, between URN and RF and between RN and RF. Ceiling height and reach demands had a statistically significant effect on all respiratory responses. There was a statistically significant difference in mean oxygen consumption (VO2) between the URN and all other conditions, and between the most restricted task (RF) and all other conditions. Both the effect of ceiling height and reach demands had a statistically statistically significant impact on VO2. Respiratory quotient (RQ) was significantly higher when loads were moved over 800mm compared to 400mm yet ceiling height did not have a statistically significant effect on RQ. Mean energy expenditure was significantly higher in the RF condition compared to the two least restrictive conditions (URN and RN). Statistically significant differences in EE were also evident between URN and RN, and between URN and URF. EE was significantly affected by reductions in ceiling height and increases in reach demands. Perceptually, the RF task (mean ‘Central’ RPE of 11) was perceived to place significantly greater cardiorespiratory demands on the operator compared to the URN (CRPE: 10) and RN (CRPE: 10) conditions. Statistically significant differences in perceived musculoskeletal strain only occurred between URN and RF. The effect of reach was perceived to have a statistically significant effect on both cardiovascular and musculoskeletal demands whereas ceiling height only had a statistically significant effect on musculoskeletal demands. The greatest discomfort was experienced in the lower back with the most intense discomfort occurring in the RN condition.
- Full Text:
- Authors: Wolfe, Amy
- Date: 2008
- Subjects: Human engineering , Posture , Human mechanics , Work environment , Human beings -- Effect of environment on , Musculoskeletal system -- Wounds and injuries , Industrial safety , Work -- Physiological aspects , Stress (Physiology)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5115 , http://hdl.handle.net/10962/d1005193 , Human engineering , Posture , Human mechanics , Work environment , Human beings -- Effect of environment on , Musculoskeletal system -- Wounds and injuries , Industrial safety , Work -- Physiological aspects , Stress (Physiology)
- Description: Manual lifting tasks are the predominant means of transporting materials in industry with many of these tasks being performed in confined spaces. Research has tended to focus on the biomechanical implications of working in small spaces with a decided lack of information about the physiological and perceptual responses in these environments. This holistic study therefore investigated the manner in which the human operator responded to conditions where the ceiling height was lowered and reach demands increased. Thirty-two young physically active male subjects (age: 21.55yr; stature: 1810mm) were recruited to complete a 2-way repeated measures experiment during which four lifting protocols where different combinations of ceiling height (‘normal’ or reduced to 1460mm in height) and reach demands (400mm or 800mm) were tested. A crude postural analysis was conducted while physiological responses were detailed and continuously monitored. Perceptual responses were also assessed. The tasks with a ‘normal’ ceiling height (mean compression forces: 2615N; mean shearing forces: 388N) and the greatest reach distance (mean compression forces: 3655N; mean shearing forces: 386N) placed individuals under the highest strain. Mean heart rate (HR) responses were significantly lower (p < 0.05) in the URN condition when compared to the RF condition. Furthermore, HR responses were statistically significantly affected by the height of the ceiling and the reach depth. Statistically significant differences (p< 0.05) in mean tidal volume (VT) occurred in the least (URN) and most (RF) restrictive conditions. Statistically significant differences (p < 0.05) in mean VE were evident between URN and URF, between URN and RF and between RN and RF. Ceiling height and reach demands had a statistically significant effect on all respiratory responses. There was a statistically significant difference in mean oxygen consumption (VO2) between the URN and all other conditions, and between the most restricted task (RF) and all other conditions. Both the effect of ceiling height and reach demands had a statistically statistically significant impact on VO2. Respiratory quotient (RQ) was significantly higher when loads were moved over 800mm compared to 400mm yet ceiling height did not have a statistically significant effect on RQ. Mean energy expenditure was significantly higher in the RF condition compared to the two least restrictive conditions (URN and RN). Statistically significant differences in EE were also evident between URN and RN, and between URN and URF. EE was significantly affected by reductions in ceiling height and increases in reach demands. Perceptually, the RF task (mean ‘Central’ RPE of 11) was perceived to place significantly greater cardiorespiratory demands on the operator compared to the URN (CRPE: 10) and RN (CRPE: 10) conditions. Statistically significant differences in perceived musculoskeletal strain only occurred between URN and RF. The effect of reach was perceived to have a statistically significant effect on both cardiovascular and musculoskeletal demands whereas ceiling height only had a statistically significant effect on musculoskeletal demands. The greatest discomfort was experienced in the lower back with the most intense discomfort occurring in the RN condition.
- Full Text:
Combined and additive effects of assembly tasks and constrained body postures
- Authors: Skelton, Sarah Anne
- Date: 2007
- Subjects: Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5107 , http://hdl.handle.net/10962/d1005185 , Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Description: Despite extensive research into musculoskeletal disorders (MSDs) they continue to plague workers. Manual materials handling (MMH), in particular the concurrence of load manipulation and awkward body posture, has been identified as a key factor in the onset of MSDs. Only a few studies have looked at the interaction between manipulation tasks and working posture during assembly tasks and as a result their relationship has not been widely explored. Assessing the stresses resulting from individual task factors and body posture in isolation and adding them together may be too simplified to estimate an overall risk profile, since this does not take into account that there may be a non-linear interaction in strain responses when manipulation task and body posture interact. Therefore, the present study investigated biophysical, physiological and psychophysical responses to combined tasks, rather than individual tasks of body posture and manipulative tasks. The objective of the research was to establish the interactive effects of constrained body postures and manipulative tasks and to identify whether a cumulative or compensatory reaction occurs during this interaction. Nine conditions were assessed in a laboratory setting, which included combinations of three working postures (standing, sitting and stooping) and three assembly tasks (torque wrenching, precision and no task). Thirty-six subjects were required to complete all nine conditions, with each condition lasting ninety seconds. Muscle activity was recorded for seven muscles from the upper extremity, trunk and lower extremity regions and was complemented by physiological (heart rate, tidal volume, minute ventilation, oxygen consumption, energy expenditure and breathing frequency) and psychophysical (body discomfort) data. At the completion of all nine conditions subjects completed a retrospective psychophysical rating questionnaire pertaining to discomfort felt during the conditions. Responses obtained for the different task and posture combinations revealed compensatory reactions (additive > combined) for most of the conditions assessed for the biomechanical and physiological responses. In the majority of cases for muscle activity, no significant differences were found between the combined and the additive effects (p < 0.05), while for the physiological responses there were mostly significant differences observed. Psychophysical responses indicated that there was a significant difference overall between the additive and combined effects. The results of this study demonstrate that in order to identify risk areas, manipulation tasks and constrained working postures may be considered either in isolation and added together (additive) or as a combined task, since there were very few significant differences observed between these two effects. Further studies are required, however, to provide conclusive evidence.
- Full Text:
- Authors: Skelton, Sarah Anne
- Date: 2007
- Subjects: Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5107 , http://hdl.handle.net/10962/d1005185 , Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Description: Despite extensive research into musculoskeletal disorders (MSDs) they continue to plague workers. Manual materials handling (MMH), in particular the concurrence of load manipulation and awkward body posture, has been identified as a key factor in the onset of MSDs. Only a few studies have looked at the interaction between manipulation tasks and working posture during assembly tasks and as a result their relationship has not been widely explored. Assessing the stresses resulting from individual task factors and body posture in isolation and adding them together may be too simplified to estimate an overall risk profile, since this does not take into account that there may be a non-linear interaction in strain responses when manipulation task and body posture interact. Therefore, the present study investigated biophysical, physiological and psychophysical responses to combined tasks, rather than individual tasks of body posture and manipulative tasks. The objective of the research was to establish the interactive effects of constrained body postures and manipulative tasks and to identify whether a cumulative or compensatory reaction occurs during this interaction. Nine conditions were assessed in a laboratory setting, which included combinations of three working postures (standing, sitting and stooping) and three assembly tasks (torque wrenching, precision and no task). Thirty-six subjects were required to complete all nine conditions, with each condition lasting ninety seconds. Muscle activity was recorded for seven muscles from the upper extremity, trunk and lower extremity regions and was complemented by physiological (heart rate, tidal volume, minute ventilation, oxygen consumption, energy expenditure and breathing frequency) and psychophysical (body discomfort) data. At the completion of all nine conditions subjects completed a retrospective psychophysical rating questionnaire pertaining to discomfort felt during the conditions. Responses obtained for the different task and posture combinations revealed compensatory reactions (additive > combined) for most of the conditions assessed for the biomechanical and physiological responses. In the majority of cases for muscle activity, no significant differences were found between the combined and the additive effects (p < 0.05), while for the physiological responses there were mostly significant differences observed. Psychophysical responses indicated that there was a significant difference overall between the additive and combined effects. The results of this study demonstrate that in order to identify risk areas, manipulation tasks and constrained working postures may be considered either in isolation and added together (additive) or as a combined task, since there were very few significant differences observed between these two effects. Further studies are required, however, to provide conclusive evidence.
- Full Text:
Field and laboratory analyses of manual tasks in the South African automotive industry
- Authors: James, Jonathan Peter
- Date: 2007
- Subjects: Automobile industry and trade -- South Africa -- Safety measures , Human engineering -- South Africa , Automobile industry workers -- South Africa -- Health risk assessment , Industrial safety -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5121 , http://hdl.handle.net/10962/d1005199 , Automobile industry and trade -- South Africa -- Safety measures , Human engineering -- South Africa , Automobile industry workers -- South Africa -- Health risk assessment , Industrial safety -- South Africa
- Description: The present study adopted a “field-laboratory-field” approach in the assessment of the efficacy of ergonomics interventions specific to two selected tasks evaluated in a South African automotive industry. Initial field testing was conducted in an Eastern Cape (South Africa) automotive plant where high risk areas were identified during walkthrough ergonomics surveys in conjunction with interaction with operators. Temporal factors and working postures of 12 industrial workers were recorded and observed, while physiological and perceptual responses were assessed. Two priority areas were focused upon for analysis, namely the Paintshop and Bodyshop with the former identified as being the more taxing of the two tasks. Responses of 30 students participating in rigourously controlled laboratory simulations were subsequently collected while completing the two tasks, namely the Paintshop Trolley Transfer (PTT) and Car Door Carriage (CDC) for participants. Working postures, kinematic, physiological and perceptual responses were assessed pre- and post-intervention. Following the laboratory experimentation a basic re-evaluation was conducted at the plant to assess whether the proposed changes had a positive effect on working postures, physiological and perceptual responses. The results of the preliminary field investigation revealed a prevalence of awkward working postures and excessive manual work in both areas. Laboratory experimentation revealed a notable reduction in task demands pre- versus post-intervention. The PTT mean lean angle for two-handed pre-intervention pulling observations of 23.7° (±3.51) was reduced to 13.9° (±2.21) post-intervention. Low back disorder (LBD) risk was reduced during the two-handed pull intervention (from 36.8% ±8.03 to 21.7% ±5.31). A significant decrement in heart rate responses from 103 bt.min-1 (±11.62) to 93 bt.min[superscript -1] (±11.77) was recorded during the two-handed symmetrical pushing intervention. The electromyography (EMG) responses for one-handed pushing and pulling pre-intervention showed the highest levels of muscular activity in the right medial deltoid due to an awkward and asymmetrical posture. CDC responses demonstrated that minor changes in the storage height of the door resulted in a significant reduction in sagittal flexion from 28.0° (±4.78) to 20.7° (±5.65). Predictions of average probability of LBD risk were significantly reduced from 50.3% (±5.91) to 39.8% (±5.10) for post-intervention car door lifting. In addition, the greatest reduction in EMG activity as a %MVC was achieved during sub-task ii (reduced from 35.1 to 13.7% and 30.5 to 13.9% for left and right erector spinae respectively) which was associated with the introduction of the transfer trolley for the door transfer phase of the CDC. Re-evaluation in the automotive plant revealed that the most notable change has been the implementation of automated ride on trolleys in the Paintshop. The Bodyshop area has also been modified to allow more effective job rotation and the step into the storage bin has been reduced via a “low-cost” stepping platform. Mean heart rate recordings were reduced from 94 (±9.77) bt.min[superscript -1] to 81 (±3.72) bt.min[superscript -1] in the Paintshop. Overall the results demonstrate the effect of “low-cost” interventions in reducing the physical stresses placed on workers in the automotive industry where much of the work is still done manually.
- Full Text:
- Authors: James, Jonathan Peter
- Date: 2007
- Subjects: Automobile industry and trade -- South Africa -- Safety measures , Human engineering -- South Africa , Automobile industry workers -- South Africa -- Health risk assessment , Industrial safety -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5121 , http://hdl.handle.net/10962/d1005199 , Automobile industry and trade -- South Africa -- Safety measures , Human engineering -- South Africa , Automobile industry workers -- South Africa -- Health risk assessment , Industrial safety -- South Africa
- Description: The present study adopted a “field-laboratory-field” approach in the assessment of the efficacy of ergonomics interventions specific to two selected tasks evaluated in a South African automotive industry. Initial field testing was conducted in an Eastern Cape (South Africa) automotive plant where high risk areas were identified during walkthrough ergonomics surveys in conjunction with interaction with operators. Temporal factors and working postures of 12 industrial workers were recorded and observed, while physiological and perceptual responses were assessed. Two priority areas were focused upon for analysis, namely the Paintshop and Bodyshop with the former identified as being the more taxing of the two tasks. Responses of 30 students participating in rigourously controlled laboratory simulations were subsequently collected while completing the two tasks, namely the Paintshop Trolley Transfer (PTT) and Car Door Carriage (CDC) for participants. Working postures, kinematic, physiological and perceptual responses were assessed pre- and post-intervention. Following the laboratory experimentation a basic re-evaluation was conducted at the plant to assess whether the proposed changes had a positive effect on working postures, physiological and perceptual responses. The results of the preliminary field investigation revealed a prevalence of awkward working postures and excessive manual work in both areas. Laboratory experimentation revealed a notable reduction in task demands pre- versus post-intervention. The PTT mean lean angle for two-handed pre-intervention pulling observations of 23.7° (±3.51) was reduced to 13.9° (±2.21) post-intervention. Low back disorder (LBD) risk was reduced during the two-handed pull intervention (from 36.8% ±8.03 to 21.7% ±5.31). A significant decrement in heart rate responses from 103 bt.min-1 (±11.62) to 93 bt.min[superscript -1] (±11.77) was recorded during the two-handed symmetrical pushing intervention. The electromyography (EMG) responses for one-handed pushing and pulling pre-intervention showed the highest levels of muscular activity in the right medial deltoid due to an awkward and asymmetrical posture. CDC responses demonstrated that minor changes in the storage height of the door resulted in a significant reduction in sagittal flexion from 28.0° (±4.78) to 20.7° (±5.65). Predictions of average probability of LBD risk were significantly reduced from 50.3% (±5.91) to 39.8% (±5.10) for post-intervention car door lifting. In addition, the greatest reduction in EMG activity as a %MVC was achieved during sub-task ii (reduced from 35.1 to 13.7% and 30.5 to 13.9% for left and right erector spinae respectively) which was associated with the introduction of the transfer trolley for the door transfer phase of the CDC. Re-evaluation in the automotive plant revealed that the most notable change has been the implementation of automated ride on trolleys in the Paintshop. The Bodyshop area has also been modified to allow more effective job rotation and the step into the storage bin has been reduced via a “low-cost” stepping platform. Mean heart rate recordings were reduced from 94 (±9.77) bt.min[superscript -1] to 81 (±3.72) bt.min[superscript -1] in the Paintshop. Overall the results demonstrate the effect of “low-cost” interventions in reducing the physical stresses placed on workers in the automotive industry where much of the work is still done manually.
- Full Text:
Laboratory investigation of a load carriage task observed in forestry
- Authors: Furney, Sheena Elizabeth
- Date: 2007
- Subjects: Work -- Physiological aspects , Foresters -- Workload , Human engineering , Lifting and carrying
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5145 , http://hdl.handle.net/10962/d1008188 , Work -- Physiological aspects , Foresters -- Workload , Human engineering , Lifting and carrying
- Description: The objective of the present study was to investigate and compare the human responses to two load carriage tasks performed with three different load masses and on three different gradients. The task of carrying hydrogel in one hand was observed in a silviculture industry and crude physiological and perceptual responses were measured. This task was simulated in a laboratory setting together with a suggested intervention of backpack carriage. Eighteen conditions were established which consisted of the two modes of carriage and a combination of three load masses (9kg, 12kg and 15kg) and three gradients (5%, 10% and 15%). Twenty eight Rhodes University female students comprised the sample and the experimental procedures were conducted on a Quinton treadmill. Each participant was required to complete nine of the eighteen conditions which were each four minutes in duration. Postural changes were assessed using lateral and posterior digital images taken at the second and fourth minute and compression and shearing forces were estimated with the ErgolmagerTM Physiological responses (heart rate, ventilation and metabolic responses) were measured continuously with the Quark b² and perceptual responses ('central' and 'local' RPE) were measured every minute during the experimentation and body discomfort was rated at the completion of each condition. Overall responses revealed that hand carriage (146 bt.min⁻¹ , 25.09 mIO₂. kg-l.min⁻¹) was generally found to be more physiologically stressful than backpack carriage (130 bt.min⁻¹, 22.15 mIO₂.kg⁻¹ .min⁻¹) independent of load mass and gradient. Physiological responses were higher (113 bt.min-1 to 174 bt.min⁻¹ ) in responses to increasing gradient as opposed to increasing load mass (104 bt.min-1 to 153 bt.min⁻¹ ) for both backpack and hand carriage. Categorisation using the guidelines of Sanders and McCormick (1993) allowed for classification of conditions, with respect to physiological responses, into 'moderate', 'heavy' and 'very heavy' stress. For almost all of the physiological responses the majority of conditions which were classified as 'moderate' were backpack carriage conditions and the conditions classified as 'very heavy' were mostly hand carriage conditions. In terms of postural responses hand carriage resulted in more strain and greater compression and shearing forces on the spine. In terms of the compression forces increasing gradient had a greater affect on backpack carriage (681 N to 935 N) compared to hand carriage (570N to 793N). In contrast, increasing load mass had a larger affect on hand carriage postures and compression forces (751 N to 935N) in comparison to backpack carriage (723N to 780N). Shearing forces were found to be worse in hand carriage conditions overall. Although participants generally underrated perceived exertion in relation to cardiorespiratory responses, these perceptions revealed that backpack carriage, with a mean 'central' RPE of 12 compared to 11 for hand carriage, was somewhat preferred to hand carriage and that increasing gradient was perceived to be marginally more straining than increasing load mass.
- Full Text:
- Authors: Furney, Sheena Elizabeth
- Date: 2007
- Subjects: Work -- Physiological aspects , Foresters -- Workload , Human engineering , Lifting and carrying
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5145 , http://hdl.handle.net/10962/d1008188 , Work -- Physiological aspects , Foresters -- Workload , Human engineering , Lifting and carrying
- Description: The objective of the present study was to investigate and compare the human responses to two load carriage tasks performed with three different load masses and on three different gradients. The task of carrying hydrogel in one hand was observed in a silviculture industry and crude physiological and perceptual responses were measured. This task was simulated in a laboratory setting together with a suggested intervention of backpack carriage. Eighteen conditions were established which consisted of the two modes of carriage and a combination of three load masses (9kg, 12kg and 15kg) and three gradients (5%, 10% and 15%). Twenty eight Rhodes University female students comprised the sample and the experimental procedures were conducted on a Quinton treadmill. Each participant was required to complete nine of the eighteen conditions which were each four minutes in duration. Postural changes were assessed using lateral and posterior digital images taken at the second and fourth minute and compression and shearing forces were estimated with the ErgolmagerTM Physiological responses (heart rate, ventilation and metabolic responses) were measured continuously with the Quark b² and perceptual responses ('central' and 'local' RPE) were measured every minute during the experimentation and body discomfort was rated at the completion of each condition. Overall responses revealed that hand carriage (146 bt.min⁻¹ , 25.09 mIO₂. kg-l.min⁻¹) was generally found to be more physiologically stressful than backpack carriage (130 bt.min⁻¹, 22.15 mIO₂.kg⁻¹ .min⁻¹) independent of load mass and gradient. Physiological responses were higher (113 bt.min-1 to 174 bt.min⁻¹ ) in responses to increasing gradient as opposed to increasing load mass (104 bt.min-1 to 153 bt.min⁻¹ ) for both backpack and hand carriage. Categorisation using the guidelines of Sanders and McCormick (1993) allowed for classification of conditions, with respect to physiological responses, into 'moderate', 'heavy' and 'very heavy' stress. For almost all of the physiological responses the majority of conditions which were classified as 'moderate' were backpack carriage conditions and the conditions classified as 'very heavy' were mostly hand carriage conditions. In terms of postural responses hand carriage resulted in more strain and greater compression and shearing forces on the spine. In terms of the compression forces increasing gradient had a greater affect on backpack carriage (681 N to 935 N) compared to hand carriage (570N to 793N). In contrast, increasing load mass had a larger affect on hand carriage postures and compression forces (751 N to 935N) in comparison to backpack carriage (723N to 780N). Shearing forces were found to be worse in hand carriage conditions overall. Although participants generally underrated perceived exertion in relation to cardiorespiratory responses, these perceptions revealed that backpack carriage, with a mean 'central' RPE of 12 compared to 11 for hand carriage, was somewhat preferred to hand carriage and that increasing gradient was perceived to be marginally more straining than increasing load mass.
- Full Text:
The impact of load and frequency on the biomechanical, physiological and perceptual responses to dynamic pushing
- Authors: Cripwell, Adam Michael
- Date: 2007
- Subjects: Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5144 , http://hdl.handle.net/10962/d1008183 , Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Description: The objective of the present research was to establish the biomechanical, physiological and perceptual responses of male operators to dynamic pushing tasks. The pushing tasks were performed using an industrial pallet jack with varying load/frequency combinations, in a controlled laboratory environment. Thirty healthy male subjects comprised the sample. Experimental procedures were conducted utilising the Chatillon ™ Dynamometer to measure force output in the initial, sustained and ending phases. The K4b2 Ergospirometer was used to assess physiological responses (heart rate and oxygen consumption [V02])' Nine recorded forces and nine experimental conditions formed the basis of this study, with subjects required to push three loads (200kg, 350kg, 500kg) at three frequencies (1120 sec, 1/40 sec, 1/60 sec) at a speed of 3.6km.h-1 over 14 metres on a co-efficient of friction controlled walkway for six minutes. Gait analysis, along with perceptions of exertion (,Central ' and 'Local' RPE) were collected during the third and sixth minutes of each condition . Body discomfort and contribution were identified upon completion of each condition. The results demonstrated that load and frequency interacted to influence responses within each domain. Increasing loads required increased force output during each stage of the push, which had a concomitant effect on physiological and perceptual responses. Significant differences arose between the initial, sustained and ending forces for each load, showing the direct relationship between load and force exertion. The combination of heaviest load/quickest frequency required the greatest physiological output, exceeding recommended guidelines for heart rate, V02 and energy expenditure responses. Intermediate combinations required moderate and acceptable energy cost. Linear relationships were established between heart rate and oxygen consumption , as well as between load and V02 , thus providing industrial practitioners an opportunity to evaluate task demands in situ. The combination of high forces and elevated physiological responses increased the subjective rating of the condition. The results emphasise the need to holistically consider all contributing factors in a dynamic pushing task. Dynamic pushing tasks place biomechanical, physiological and perceptual demands on the human operator, which must be minimised in order to ensure that this form of manual materials handling becomes sustainable in the long term.
- Full Text:
- Authors: Cripwell, Adam Michael
- Date: 2007
- Subjects: Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5144 , http://hdl.handle.net/10962/d1008183 , Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Description: The objective of the present research was to establish the biomechanical, physiological and perceptual responses of male operators to dynamic pushing tasks. The pushing tasks were performed using an industrial pallet jack with varying load/frequency combinations, in a controlled laboratory environment. Thirty healthy male subjects comprised the sample. Experimental procedures were conducted utilising the Chatillon ™ Dynamometer to measure force output in the initial, sustained and ending phases. The K4b2 Ergospirometer was used to assess physiological responses (heart rate and oxygen consumption [V02])' Nine recorded forces and nine experimental conditions formed the basis of this study, with subjects required to push three loads (200kg, 350kg, 500kg) at three frequencies (1120 sec, 1/40 sec, 1/60 sec) at a speed of 3.6km.h-1 over 14 metres on a co-efficient of friction controlled walkway for six minutes. Gait analysis, along with perceptions of exertion (,Central ' and 'Local' RPE) were collected during the third and sixth minutes of each condition . Body discomfort and contribution were identified upon completion of each condition. The results demonstrated that load and frequency interacted to influence responses within each domain. Increasing loads required increased force output during each stage of the push, which had a concomitant effect on physiological and perceptual responses. Significant differences arose between the initial, sustained and ending forces for each load, showing the direct relationship between load and force exertion. The combination of heaviest load/quickest frequency required the greatest physiological output, exceeding recommended guidelines for heart rate, V02 and energy expenditure responses. Intermediate combinations required moderate and acceptable energy cost. Linear relationships were established between heart rate and oxygen consumption , as well as between load and V02 , thus providing industrial practitioners an opportunity to evaluate task demands in situ. The combination of high forces and elevated physiological responses increased the subjective rating of the condition. The results emphasise the need to holistically consider all contributing factors in a dynamic pushing task. Dynamic pushing tasks place biomechanical, physiological and perceptual demands on the human operator, which must be minimised in order to ensure that this form of manual materials handling becomes sustainable in the long term.
- Full Text:
A field investigation of physical workloads imposed on harvesters in South African forestry
- Authors: Christie, Candice Jo-Anne
- Date: 2006
- Subjects: Forests and forestry -- South Africa Employees -- Workload Forest products industry -- South Africa Work -- Physiological aspects Heart rate monitoring Foresters -- South Africa -- Workload Oxygen -- Physiological transport
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5122 , http://hdl.handle.net/10962/d1005200
- Description: The focus of this field investigation was an analysis of the work demands being placed on South African forestry workers, in particular Chainsaw Operators and Stackers. Working postures, physiological and perceptual responses were assessed on a sample of 58 workers (29 Chainsaw Operators and 29 Stackers) during a ‘normal’ working shift. Body mass was measured before and after work in order to determine dehydration levels. Polar heart rate monitors were fitted to six workers each day over a period of two weeks in order to record ‘working’ heart rates. Fluid and food intake was monitored and recorded during this initial data collection phase. The Rating of Perceived Exertion and Body Discomfort Scales were explained in Zulu, their native language, and workers were asked to rate their perceptions of effort at regular intervals during work, while areas and intensity of body discomfort was obtained on completion of work. After completing a work shift, a 30 minute ‘recovery’ period was given, thereafter a portable ergospirometer, the k4b², was attached to the worker who then participated in a progressive, submaximal step test for the purpose of establishing individual, and group, heart rate-oxygen uptake (HR/VO[subscript 2]) regressions for predicting oxygen uptake from ‘working’ heart rate responses. These procedures were repeated four weeks later following the introduction of a fluid and nutritional supplement during work which was delivered to the workers while they were executing their tasks. The results revealed awkward working postures with a predominance of trunk flexion during all the harvesting tasks; these postures, adopted for long periods during work, are very likely to lead to the development of musculoskeletal injuries. The mean working heart rates were 123.3 bt.min[superscript (-1)] and 117.6 bt.min[superscript (-1)] during chainsaw operations and stacking respectively. During the step test, the mean heart rate and oxygen uptake responses were 127.9 bt.min[superscript (-1)] and 22.9 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] (Chainsaw Operators) and 116.9 bt.min[superscript (-1)] and 24.0 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] (Stackers), revealing no significant difference between the ‘working’ heart rates and the heart rates recorded during the step test. Physiological responses were analyzed over the full work shift which was divided into four quarters. Heart rate and oxygen uptake were significantly higher during the last half of the Chainsaw Operators’ work shift compared to the first half. Heart rate increased from 120.7 bt.min[superscript (-1)] during the first quarter to 127.4 bt.min[superscript (-1)] during the last quarter of chainsaw operations. Likewise, oxygen uptake increased from 19.9 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] to 22.9 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] from the first to the last quarter of work. During stacking the heart rate (mean of 117.6 bt.min[superscript (-1)]) and oxygen uptake (mean of 24.6 ml.kg[superscript (-1)].min[superscript (-1)]) responses remained stable over the duration of the working shift. Workers lost, on average, 2.8% body mass during work while felling and cross-cutting and 3.6% during stacking. This reduced significantly to a loss of 0.4% body mass when re-tested following the introduction of water and food during the work period. Likewise, the energy deficit was significantly improved due to the introduction of a nutritional supplement. Pre-intervention the deficit was 8861.8 kJ (Chainsaw Operators) and 8804.2 kJ (Stackers) while in the post-intervention phase this deficit was reduced by approximately 50% for both groups of workers.
- Full Text:
- Authors: Christie, Candice Jo-Anne
- Date: 2006
- Subjects: Forests and forestry -- South Africa Employees -- Workload Forest products industry -- South Africa Work -- Physiological aspects Heart rate monitoring Foresters -- South Africa -- Workload Oxygen -- Physiological transport
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5122 , http://hdl.handle.net/10962/d1005200
- Description: The focus of this field investigation was an analysis of the work demands being placed on South African forestry workers, in particular Chainsaw Operators and Stackers. Working postures, physiological and perceptual responses were assessed on a sample of 58 workers (29 Chainsaw Operators and 29 Stackers) during a ‘normal’ working shift. Body mass was measured before and after work in order to determine dehydration levels. Polar heart rate monitors were fitted to six workers each day over a period of two weeks in order to record ‘working’ heart rates. Fluid and food intake was monitored and recorded during this initial data collection phase. The Rating of Perceived Exertion and Body Discomfort Scales were explained in Zulu, their native language, and workers were asked to rate their perceptions of effort at regular intervals during work, while areas and intensity of body discomfort was obtained on completion of work. After completing a work shift, a 30 minute ‘recovery’ period was given, thereafter a portable ergospirometer, the k4b², was attached to the worker who then participated in a progressive, submaximal step test for the purpose of establishing individual, and group, heart rate-oxygen uptake (HR/VO[subscript 2]) regressions for predicting oxygen uptake from ‘working’ heart rate responses. These procedures were repeated four weeks later following the introduction of a fluid and nutritional supplement during work which was delivered to the workers while they were executing their tasks. The results revealed awkward working postures with a predominance of trunk flexion during all the harvesting tasks; these postures, adopted for long periods during work, are very likely to lead to the development of musculoskeletal injuries. The mean working heart rates were 123.3 bt.min[superscript (-1)] and 117.6 bt.min[superscript (-1)] during chainsaw operations and stacking respectively. During the step test, the mean heart rate and oxygen uptake responses were 127.9 bt.min[superscript (-1)] and 22.9 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] (Chainsaw Operators) and 116.9 bt.min[superscript (-1)] and 24.0 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] (Stackers), revealing no significant difference between the ‘working’ heart rates and the heart rates recorded during the step test. Physiological responses were analyzed over the full work shift which was divided into four quarters. Heart rate and oxygen uptake were significantly higher during the last half of the Chainsaw Operators’ work shift compared to the first half. Heart rate increased from 120.7 bt.min[superscript (-1)] during the first quarter to 127.4 bt.min[superscript (-1)] during the last quarter of chainsaw operations. Likewise, oxygen uptake increased from 19.9 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] to 22.9 mlO[subscript 2].kg[superscript (-1)].min[superscript (-1)] from the first to the last quarter of work. During stacking the heart rate (mean of 117.6 bt.min[superscript (-1)]) and oxygen uptake (mean of 24.6 ml.kg[superscript (-1)].min[superscript (-1)]) responses remained stable over the duration of the working shift. Workers lost, on average, 2.8% body mass during work while felling and cross-cutting and 3.6% during stacking. This reduced significantly to a loss of 0.4% body mass when re-tested following the introduction of water and food during the work period. Likewise, the energy deficit was significantly improved due to the introduction of a nutritional supplement. Pre-intervention the deficit was 8861.8 kJ (Chainsaw Operators) and 8804.2 kJ (Stackers) while in the post-intervention phase this deficit was reduced by approximately 50% for both groups of workers.
- Full Text:
The effect of personalised adjustments to computer workstations on the efficiency and physical comfort of computer operators
- Authors: James, Genevieve
- Date: 2005
- Subjects: Human engineering , Engineering design , Work environment , Microcomputer workstations -- Health aspects , Occupational diseases -- Prevention
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5112 , http://hdl.handle.net/10962/d1005190 , Human engineering , Engineering design , Work environment , Microcomputer workstations -- Health aspects , Occupational diseases -- Prevention
- Description: The present study sought to investigate the effects of a Standard workstation, designed for “average” users, on an anthropometrically diverse sample of computer operators, and to assess whether physical and perceptual responses, as well as performance efficiency were dependent on stature. Further investigation assessed the influence of personalised adjustments to the Standard workstation, based on the anthropometric characteristics of the subjects, as well as the introduction of a custom-designed ‘floating’ wrist support, on subject responses. All subjects (n=30) were tested in each of the three workstations: Standard, Personalised and Wrist Support. For analysis of responses in the Standard workstation, subjects were divided into three groups depending on their stature: Short (<1650mm), Medium (1650mm to 1800mm), Tall (>1800mm). The musculoskeletal responses indicated that Tall subjects were forced to adopt the most awkward general body postures as a result of the low computer screen. However, the low screen allowed for the Short subjects to adopt the most natural general body postures, although levels of muscular activity in the upper trapezius suggest that the muscular load imposed on both Short and Tall subjects was significantly greater than that imposed on the Medium subjects. In addition, the Medium subjects’ perceptions of the Standard workstation dimensions support the fact that this workstation was better suited to users with “average” morphologies. The responses elicited in the Personalised and Wrist Support workstations were improved significantly when compared to the Standard workstation. Joint angles were more natural, upper trapezius EMG was reduced, standard of performance improved and perceptual responses indicated a diminished incidence of body and visual discomfort, as well as greater perceived satisfaction with these workstation dimensions. The improved physical responses suggest a decrease in the risk of developing cumulative trauma disorders. Although subjects were unaccustomed to the wrist support device, this workstation demonstrated a further reduction in the range of wrist angles, as well as a general positive attitude towards the concept.
- Full Text:
- Authors: James, Genevieve
- Date: 2005
- Subjects: Human engineering , Engineering design , Work environment , Microcomputer workstations -- Health aspects , Occupational diseases -- Prevention
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5112 , http://hdl.handle.net/10962/d1005190 , Human engineering , Engineering design , Work environment , Microcomputer workstations -- Health aspects , Occupational diseases -- Prevention
- Description: The present study sought to investigate the effects of a Standard workstation, designed for “average” users, on an anthropometrically diverse sample of computer operators, and to assess whether physical and perceptual responses, as well as performance efficiency were dependent on stature. Further investigation assessed the influence of personalised adjustments to the Standard workstation, based on the anthropometric characteristics of the subjects, as well as the introduction of a custom-designed ‘floating’ wrist support, on subject responses. All subjects (n=30) were tested in each of the three workstations: Standard, Personalised and Wrist Support. For analysis of responses in the Standard workstation, subjects were divided into three groups depending on their stature: Short (<1650mm), Medium (1650mm to 1800mm), Tall (>1800mm). The musculoskeletal responses indicated that Tall subjects were forced to adopt the most awkward general body postures as a result of the low computer screen. However, the low screen allowed for the Short subjects to adopt the most natural general body postures, although levels of muscular activity in the upper trapezius suggest that the muscular load imposed on both Short and Tall subjects was significantly greater than that imposed on the Medium subjects. In addition, the Medium subjects’ perceptions of the Standard workstation dimensions support the fact that this workstation was better suited to users with “average” morphologies. The responses elicited in the Personalised and Wrist Support workstations were improved significantly when compared to the Standard workstation. Joint angles were more natural, upper trapezius EMG was reduced, standard of performance improved and perceptual responses indicated a diminished incidence of body and visual discomfort, as well as greater perceived satisfaction with these workstation dimensions. The improved physical responses suggest a decrease in the risk of developing cumulative trauma disorders. Although subjects were unaccustomed to the wrist support device, this workstation demonstrated a further reduction in the range of wrist angles, as well as a general positive attitude towards the concept.
- Full Text:
Laboratory investigation of a simulated industrial task pre- and post-ergonomics intervention
- Authors: Renz, Miriam Christina
- Date: 2004
- Subjects: Human engineering , Musculoskeletal system -- Diseases , Occupational diseases
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5162 , http://hdl.handle.net/10962/d1015806
- Description: The focus of the present study was on the investigation of the effects of an intervention strategy on an industrial task in situ and a simulation of the same task within a laboratory setting. The task of offloading crates from a truck at a local business was simulated in a laboratory setting for rigorous analysis. The effect of an ergonomically sound intervention on selected physical, physiological and perceptual variables was evaluated in a test - retest experimental set-up using 28 young, healthy male students. Each of the two experimental conditions lasted for 16 minutes. In the pre-intervention task subjects were required to transfer the crates from one point to another by sliding them along the floor. During the execution of the post-intervention task responses to reductions in the stacking height and modifications of the working method were evaluated. Results obtained for spinal kinematics during the simulated industrial task indicated a high biomechanical risk, due to large ranges of motion, high velocities and accelerations in the sagittal and transverse planes. The heavy workload of the task was also evident in elevated physiological responses (HR, RF, VT, VE, VO2, RQ, EE) and perceptual ratings (RPE, Body Discomfort). Assessment of the intervention strategy revealed that the high risk industrial task was reduced to moderate acceptable, with measurements of spinal kinematics, physiological and perceptual variables being significantly reduced. An in situ re-assessment of the workers responses to the intervention also elicited reductions in heart rates and perceptual ratings compared to the original task.
- Full Text:
- Authors: Renz, Miriam Christina
- Date: 2004
- Subjects: Human engineering , Musculoskeletal system -- Diseases , Occupational diseases
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5162 , http://hdl.handle.net/10962/d1015806
- Description: The focus of the present study was on the investigation of the effects of an intervention strategy on an industrial task in situ and a simulation of the same task within a laboratory setting. The task of offloading crates from a truck at a local business was simulated in a laboratory setting for rigorous analysis. The effect of an ergonomically sound intervention on selected physical, physiological and perceptual variables was evaluated in a test - retest experimental set-up using 28 young, healthy male students. Each of the two experimental conditions lasted for 16 minutes. In the pre-intervention task subjects were required to transfer the crates from one point to another by sliding them along the floor. During the execution of the post-intervention task responses to reductions in the stacking height and modifications of the working method were evaluated. Results obtained for spinal kinematics during the simulated industrial task indicated a high biomechanical risk, due to large ranges of motion, high velocities and accelerations in the sagittal and transverse planes. The heavy workload of the task was also evident in elevated physiological responses (HR, RF, VT, VE, VO2, RQ, EE) and perceptual ratings (RPE, Body Discomfort). Assessment of the intervention strategy revealed that the high risk industrial task was reduced to moderate acceptable, with measurements of spinal kinematics, physiological and perceptual variables being significantly reduced. An in situ re-assessment of the workers responses to the intervention also elicited reductions in heart rates and perceptual ratings compared to the original task.
- Full Text:
Physiological, perceptual and performance responses during cricket activity
- Authors: King, Gregory Allen
- Date: 2003
- Subjects: Cricket , Sports -- Psychological aspects , Sports -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5131 , http://hdl.handle.net/10962/d1005210 , Cricket , Sports -- Psychological aspects , Sports -- Physiological aspects
- Description: The present study sought to determine the influence of environmental conditions and protective clothing on physiological, perceptual and performance responses during batting activity. The investigation examined mean skin temperature, average heart rate, estimated sweat rate, rating of perceived exertion, thermal sensation rating, average sprint time and pre-post choice reaction time. Twenty-five cricketers (18-22 yr, 73.1 ± 9.6 kg, 1768 ± 75 mm, 12.6 ± 3.1% body fat, 1.89 ± 0.16 m2) performed a work-bout consisting of a seven-Over batting period, during which time they faced deliveries from a bowling machine and performed two shuttle runs every third ball to total four sprints per Over. Trials were carried out under High-stress (23.8 ± 2.2 °C) and Low-stress (13.3 ± 1.9 °C) environmental conditions (WBGT). Within each environmental condition subjects performed the test wearing full protective batting gear and no protective gear. Thus, four specific conditions were examined; high full-gear (HFG), high no-gear (HNG), low full-gear (LFG) and low no-gear (LNG). Two-way ANOVAs were calculated to determine whether there were differences between environmental conditions and whether differences existed between the clothing conditions. One-way ANOVAs were utilised to compute differences between the four specific conditions combining clothing and environment. High environmental stress and wearing protective clothing caused batsmen to experience significant physiological strain. The environment was the greatest stressor, with the protective gear exacerbating these effects. However, when padding covered skin areas directly, this was the primary skin temperature stressor, particularly later in the activity. For skin temperature and heart rate, the strain was the most pronounced at the end of the trials. Perceptual responses indicated that the protective gear had no influence on effort sense, thermal sensation or thermal comfort. However, environmental conditions had an effect, and High-stress conditions resulted in significantly higher perceptions of effort, elevated sensations of heat and greater thermal discomfort. Effort was perceived to be greatest towards the end of the trial. There were mixed findings for performance factors. In general sprint performance was not hindered by environmental stress, but protective clothing caused a reduction in several sprint times. Choice reaction times were for the most part unaffected by either environment or clothing and few differences were observed between pre and post times. It is contended that intense short duration batting activity, likely encountered during one-day participation, imposes a stress on batsmen. The stress is greater when conditions are warmer and protective padding is worn, although it is not sufficient to impede choice reaction time. However, protective gear did have a deleterious effect on sprint performance.
- Full Text:
- Authors: King, Gregory Allen
- Date: 2003
- Subjects: Cricket , Sports -- Psychological aspects , Sports -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5131 , http://hdl.handle.net/10962/d1005210 , Cricket , Sports -- Psychological aspects , Sports -- Physiological aspects
- Description: The present study sought to determine the influence of environmental conditions and protective clothing on physiological, perceptual and performance responses during batting activity. The investigation examined mean skin temperature, average heart rate, estimated sweat rate, rating of perceived exertion, thermal sensation rating, average sprint time and pre-post choice reaction time. Twenty-five cricketers (18-22 yr, 73.1 ± 9.6 kg, 1768 ± 75 mm, 12.6 ± 3.1% body fat, 1.89 ± 0.16 m2) performed a work-bout consisting of a seven-Over batting period, during which time they faced deliveries from a bowling machine and performed two shuttle runs every third ball to total four sprints per Over. Trials were carried out under High-stress (23.8 ± 2.2 °C) and Low-stress (13.3 ± 1.9 °C) environmental conditions (WBGT). Within each environmental condition subjects performed the test wearing full protective batting gear and no protective gear. Thus, four specific conditions were examined; high full-gear (HFG), high no-gear (HNG), low full-gear (LFG) and low no-gear (LNG). Two-way ANOVAs were calculated to determine whether there were differences between environmental conditions and whether differences existed between the clothing conditions. One-way ANOVAs were utilised to compute differences between the four specific conditions combining clothing and environment. High environmental stress and wearing protective clothing caused batsmen to experience significant physiological strain. The environment was the greatest stressor, with the protective gear exacerbating these effects. However, when padding covered skin areas directly, this was the primary skin temperature stressor, particularly later in the activity. For skin temperature and heart rate, the strain was the most pronounced at the end of the trials. Perceptual responses indicated that the protective gear had no influence on effort sense, thermal sensation or thermal comfort. However, environmental conditions had an effect, and High-stress conditions resulted in significantly higher perceptions of effort, elevated sensations of heat and greater thermal discomfort. Effort was perceived to be greatest towards the end of the trial. There were mixed findings for performance factors. In general sprint performance was not hindered by environmental stress, but protective clothing caused a reduction in several sprint times. Choice reaction times were for the most part unaffected by either environment or clothing and few differences were observed between pre and post times. It is contended that intense short duration batting activity, likely encountered during one-day participation, imposes a stress on batsmen. The stress is greater when conditions are warmer and protective padding is worn, although it is not sufficient to impede choice reaction time. However, protective gear did have a deleterious effect on sprint performance.
- Full Text:
Physiological and perceptual responses of SANDF personnel to varying combinations of marching speed and backpack load
- Authors: Christie, Candice Jo-Anne
- Date: 2002
- Subjects: Marching -- Physiological aspects , Walking -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5128 , http://hdl.handle.net/10962/d1005207 , Marching -- Physiological aspects , Walking -- Physiological aspects
- Description: The objective of the present study was to establish effective combinations of marching speed and backpack load in order to meet specific military requirements. Thirty infantrymen from the South African National Defence Force (SANDF) comprised the sample and experimental procedures were conducted in a laboratory setting using a Cybex Trotter treadmill. Sixteen conditions were set up which included combinations of four speeds (3.5, 4.5, 5.5, and 6.5 km.h⁻¹) and four backpack loads (20, 35, 50, and 65kg). Each subject was required to complete 8 of the sixteen conditions, each consisting of a six-minute treadmill march. Physiological data (heart rate, ventilation and metabolic responses), kinematic gait responses (step-rate and stride length) and perceptions of exertion (“Central” and “Local” RPE) were collected during the third and sixth minutes of the treadmill march and areas of body discomfort were identified post-march. Responses revealed five distinct categories of exertional strain. Three marches constituted “nominal” (below 40% VO₂max) and three “excessive” strain (above 75% VO₂ max). These represent combinations of extreme military demands and are highly unlikely to be utilised by the military. Three “tolerable” levels of required effort were recommended and these 10 combinations were further divided into three sub-categories. The “moderate” stress marches were identified as “ideal” for prolonged marches and had statistically similar responses of working heart rates (range of 118 bt.min⁻¹ to 127 bt.min⁻¹), energy expenditure (26 kJ.min⁻¹ and 27 kJ.min⁻¹) and ratings of perceived exertion (“Central” ratings of 10 and 11). Thus, marching at 5.5 km.h⁻¹with 20kg, 4.5 km.h⁻¹ with 35kg or 3.5 km.h⁻¹ with 50kg all require a similar energy cost. Four “heavy” category marches were identified for possible use when the duration of the march is reduced. During these marches responses were statistically similar with heart rates ranging from 127 bt.min⁻¹ to 137 bt.min⁻¹, energy expenditure from 32 kJ.min⁻¹ to 37 kJ.min⁻¹ and “Central” ratings of perceived exertion were 12 and 13. When short, high intensity marches are necessary, then combinations from the “very heavy” category may be utilised but with caution. During these marches, soldiers were taxed between 65% and 75% of VO2 max. The results of this study clearly demonstrate that the interplay between speed and load needs to be adjusted when determining “ideal” combinations for specific military demands. Essentially, if speed is of the essence then load must be reduced, and if heavy loads need to be transported then speed must be reduced.
- Full Text:
- Authors: Christie, Candice Jo-Anne
- Date: 2002
- Subjects: Marching -- Physiological aspects , Walking -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5128 , http://hdl.handle.net/10962/d1005207 , Marching -- Physiological aspects , Walking -- Physiological aspects
- Description: The objective of the present study was to establish effective combinations of marching speed and backpack load in order to meet specific military requirements. Thirty infantrymen from the South African National Defence Force (SANDF) comprised the sample and experimental procedures were conducted in a laboratory setting using a Cybex Trotter treadmill. Sixteen conditions were set up which included combinations of four speeds (3.5, 4.5, 5.5, and 6.5 km.h⁻¹) and four backpack loads (20, 35, 50, and 65kg). Each subject was required to complete 8 of the sixteen conditions, each consisting of a six-minute treadmill march. Physiological data (heart rate, ventilation and metabolic responses), kinematic gait responses (step-rate and stride length) and perceptions of exertion (“Central” and “Local” RPE) were collected during the third and sixth minutes of the treadmill march and areas of body discomfort were identified post-march. Responses revealed five distinct categories of exertional strain. Three marches constituted “nominal” (below 40% VO₂max) and three “excessive” strain (above 75% VO₂ max). These represent combinations of extreme military demands and are highly unlikely to be utilised by the military. Three “tolerable” levels of required effort were recommended and these 10 combinations were further divided into three sub-categories. The “moderate” stress marches were identified as “ideal” for prolonged marches and had statistically similar responses of working heart rates (range of 118 bt.min⁻¹ to 127 bt.min⁻¹), energy expenditure (26 kJ.min⁻¹ and 27 kJ.min⁻¹) and ratings of perceived exertion (“Central” ratings of 10 and 11). Thus, marching at 5.5 km.h⁻¹with 20kg, 4.5 km.h⁻¹ with 35kg or 3.5 km.h⁻¹ with 50kg all require a similar energy cost. Four “heavy” category marches were identified for possible use when the duration of the march is reduced. During these marches responses were statistically similar with heart rates ranging from 127 bt.min⁻¹ to 137 bt.min⁻¹, energy expenditure from 32 kJ.min⁻¹ to 37 kJ.min⁻¹ and “Central” ratings of perceived exertion were 12 and 13. When short, high intensity marches are necessary, then combinations from the “very heavy” category may be utilised but with caution. During these marches, soldiers were taxed between 65% and 75% of VO2 max. The results of this study clearly demonstrate that the interplay between speed and load needs to be adjusted when determining “ideal” combinations for specific military demands. Essentially, if speed is of the essence then load must be reduced, and if heavy loads need to be transported then speed must be reduced.
- Full Text:
Physiological and psychophysical responses of male soldiers to changes in marching gradient, speed and load
- Authors: Todd, Andrew Ivan
- Date: 2002
- Subjects: Soldiers -- South Africa -- Physiology , South Africa Army -- Physical training , Marching -- Physiological aspects , Psychophysiology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5129 , http://hdl.handle.net/10962/d1005208 , Soldiers -- South Africa -- Physiology , South Africa Army -- Physical training , Marching -- Physiological aspects , Psychophysiology
- Description: The present study sought to investigate the effects of changes in gradient, under apparently optimal combinations of speed and load, on selected physiological, psychophysical and biophysical responses of military personnel. Subjects (n = 32) were required to march under level (0%), downhill (-10%) and uphill (+10%) conditions. Under each gradient, subjects marched with the following speed-load combinations: 4 km.h-1 carrying 50 kg, 5 km.h-1 carrying 35 kg and 6 km.h-1 carrying 20 kg, a total of nine experimental conditions. Subjects were required to march for six minutes under each condition. Physiological responses (HR, VO2, R, Br, VE, VT, EE) indicated that subjects were not overly taxed by the three speed-load combinations during level marching, which elicited submaximal demands. Furthermore, the results revealed that downhill marching with heavy loads results in similar responses to level marching, while lighter loads may result in significant reductions in physical demands compared to level marching. The physiological responses to uphill marching revealed that subjects were severely physically taxed under these conditions, regardless of speed-load combination. It is unlikely that soldiers would be able to maintain these intensities for an extended period without undue fatigue. It is evident from the psychophysical responses (Rating of Perceived Exertion and Body Discomfort) that subjects perceived the heavy load conditions, regardless of gradient, to be the most stressful on the cardiovascular and muscular systems. The positive gradient conditions also elicited elevated RPE and Body Discomfort responses, while lighter load downhill conditions were perceived to result in the least strain.
- Full Text:
- Authors: Todd, Andrew Ivan
- Date: 2002
- Subjects: Soldiers -- South Africa -- Physiology , South Africa Army -- Physical training , Marching -- Physiological aspects , Psychophysiology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5129 , http://hdl.handle.net/10962/d1005208 , Soldiers -- South Africa -- Physiology , South Africa Army -- Physical training , Marching -- Physiological aspects , Psychophysiology
- Description: The present study sought to investigate the effects of changes in gradient, under apparently optimal combinations of speed and load, on selected physiological, psychophysical and biophysical responses of military personnel. Subjects (n = 32) were required to march under level (0%), downhill (-10%) and uphill (+10%) conditions. Under each gradient, subjects marched with the following speed-load combinations: 4 km.h-1 carrying 50 kg, 5 km.h-1 carrying 35 kg and 6 km.h-1 carrying 20 kg, a total of nine experimental conditions. Subjects were required to march for six minutes under each condition. Physiological responses (HR, VO2, R, Br, VE, VT, EE) indicated that subjects were not overly taxed by the three speed-load combinations during level marching, which elicited submaximal demands. Furthermore, the results revealed that downhill marching with heavy loads results in similar responses to level marching, while lighter loads may result in significant reductions in physical demands compared to level marching. The physiological responses to uphill marching revealed that subjects were severely physically taxed under these conditions, regardless of speed-load combination. It is unlikely that soldiers would be able to maintain these intensities for an extended period without undue fatigue. It is evident from the psychophysical responses (Rating of Perceived Exertion and Body Discomfort) that subjects perceived the heavy load conditions, regardless of gradient, to be the most stressful on the cardiovascular and muscular systems. The positive gradient conditions also elicited elevated RPE and Body Discomfort responses, while lighter load downhill conditions were perceived to result in the least strain.
- Full Text:
Speed-related isokinetic and psychophysical responses of female military personnel
- Authors: Kennedy, Dale Charles
- Date: 2002
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:21028 , http://hdl.handle.net/10962/6063
- Description: The present study aims to contribute in an area that has long been neglected, the indigenous female population, about whose physical strength and work-capacity very little is known. Speed-related isokinetic and psychophysical responses of female military personnel were assessed (N=32). Furthermore benchmark data was established for Work-Simulation isokinetic responses where there appears to be limited publication. Analysis of the data showed significant differences in torque, work and power outputs as velocity increased. Only wrench-turning left and right rotation for peak torque and total work did not show significant reductions. Consistency of effort level recorded an average of 72% across the selected isokinetic tests. No discernible morphological and strength expression differences were observed between military office workers and infantry personnel, and no significant correlations were recorded between heart rate and RPE values.
- Full Text:
- Authors: Kennedy, Dale Charles
- Date: 2002
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:21028 , http://hdl.handle.net/10962/6063
- Description: The present study aims to contribute in an area that has long been neglected, the indigenous female population, about whose physical strength and work-capacity very little is known. Speed-related isokinetic and psychophysical responses of female military personnel were assessed (N=32). Furthermore benchmark data was established for Work-Simulation isokinetic responses where there appears to be limited publication. Analysis of the data showed significant differences in torque, work and power outputs as velocity increased. Only wrench-turning left and right rotation for peak torque and total work did not show significant reductions. Consistency of effort level recorded an average of 72% across the selected isokinetic tests. No discernible morphological and strength expression differences were observed between military office workers and infantry personnel, and no significant correlations were recorded between heart rate and RPE values.
- Full Text:
The effects of control design and working posture on strength and work output: an isokinetic investigation
- Dirkse Van Schalkwyk, Charles Joseph
- Authors: Dirkse Van Schalkwyk, Charles Joseph
- Date: 2002
- Subjects: Posture , Human engineering
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5118 , http://hdl.handle.net/10962/d1005196 , Posture , Human engineering
- Description: he objective of the present study was to assess the isokinetic, cardiovascular and psychophysical responses of young adult males (N=30) during valve turning exercises. It aimed to evaluate the variables in relation to changes in control design and working posture. Isokinetic testing and ergonomics have not been widely linked and it was an aim of this study to show the advantages to the field of ergonomics. Furthermore, the “work-simulation” package used in the present study has not been widely exploited and it was believed that this study could thus contribute significantly to the literature. Testing was carried out using a CYBEX ® 6000 isokinetic dynamometer, a polar heart watch, an Omron M1 semi-automatic blood pressure monitor and various perceptual rating scales. Testing involved the subjects having to perform 4 maximal turning efforts in 18 different conditions. These conditions were made up by using 6 different control designs in 3 varying positions. Subjects were required to attend two sessions, each approximately one hour long, in which nine randomised conditions were tested in each session. During these sessions, isokinetic responses: peak torque (Nm), total work (J) and average power (W); cardiovascular responses: heart rate (bt.min[superscript -1]) and blood pressure (mmHg); and psychophysical responses: RPE and discomfort, were observed. The results of the tests showed that in general significant differences were encountered for isokinetic, cardiovascular and psychophysical responses in relation to changes in the control design. However, significant differences were far less evident, and in most cases non existent, in relation to changes in the spatial orientation of the control types. The essence being that operator position with respect to the control is not as crucial as the control design.
- Full Text:
- Authors: Dirkse Van Schalkwyk, Charles Joseph
- Date: 2002
- Subjects: Posture , Human engineering
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5118 , http://hdl.handle.net/10962/d1005196 , Posture , Human engineering
- Description: he objective of the present study was to assess the isokinetic, cardiovascular and psychophysical responses of young adult males (N=30) during valve turning exercises. It aimed to evaluate the variables in relation to changes in control design and working posture. Isokinetic testing and ergonomics have not been widely linked and it was an aim of this study to show the advantages to the field of ergonomics. Furthermore, the “work-simulation” package used in the present study has not been widely exploited and it was believed that this study could thus contribute significantly to the literature. Testing was carried out using a CYBEX ® 6000 isokinetic dynamometer, a polar heart watch, an Omron M1 semi-automatic blood pressure monitor and various perceptual rating scales. Testing involved the subjects having to perform 4 maximal turning efforts in 18 different conditions. These conditions were made up by using 6 different control designs in 3 varying positions. Subjects were required to attend two sessions, each approximately one hour long, in which nine randomised conditions were tested in each session. During these sessions, isokinetic responses: peak torque (Nm), total work (J) and average power (W); cardiovascular responses: heart rate (bt.min[superscript -1]) and blood pressure (mmHg); and psychophysical responses: RPE and discomfort, were observed. The results of the tests showed that in general significant differences were encountered for isokinetic, cardiovascular and psychophysical responses in relation to changes in the control design. However, significant differences were far less evident, and in most cases non existent, in relation to changes in the spatial orientation of the control types. The essence being that operator position with respect to the control is not as crucial as the control design.
- Full Text:
Laboratory and occupation-simulating isokinetic and psychophysical responses of military personnel
- Authors: James, Jonathan Peter
- Date: 2001
- Subjects: Isokinetic exercise , Soldiers -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5126 , http://hdl.handle.net/10962/d1005204 , Isokinetic exercise , Soldiers -- South Africa
- Description: The present study assessed the isokinetic responses of male military personnel(N=42). The study aimed to evaluate the strength capabilities of South African infantrymen and establish benchmark data on a population not previously tested. “Work-simulation” packages have not been widely exploited and this study further aimed to approximate how effectively occupation simulating tasks could identify the capabilities of soldiers. Testing was carried out using a CYBEX 6000 isokinetic dynamometer and involved six laboratory tests (LTs) and four occupation-simulating tests (OSTs). Subjects were required to complete two testing sessions with the order of tests randomized. The LTs consisted of ankle, elbow, hip, knee, shoulder and trunk. In the OSTs, gripping, valve-tightening, wrench-turning and pulling/pushing responses were collected. Slow, medium and fast test speeds were used for each bout. Cardiac responses were measured using heart rate monitoring and perceptual measures assessed using Borg’s (1971) RPE scale. The results of the testing showed significant differences in agonist and antagonist responses at all three testing speeds, the only exception being slow speed trunk values (peak torque). Upper- to lower-extremity ratios highlighted a possible weakness in the elbow flexors group, while correlations between LTs and OSTs highlighted the specificity of strength principle, as poor relationships were observed.
- Full Text:
- Authors: James, Jonathan Peter
- Date: 2001
- Subjects: Isokinetic exercise , Soldiers -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5126 , http://hdl.handle.net/10962/d1005204 , Isokinetic exercise , Soldiers -- South Africa
- Description: The present study assessed the isokinetic responses of male military personnel(N=42). The study aimed to evaluate the strength capabilities of South African infantrymen and establish benchmark data on a population not previously tested. “Work-simulation” packages have not been widely exploited and this study further aimed to approximate how effectively occupation simulating tasks could identify the capabilities of soldiers. Testing was carried out using a CYBEX 6000 isokinetic dynamometer and involved six laboratory tests (LTs) and four occupation-simulating tests (OSTs). Subjects were required to complete two testing sessions with the order of tests randomized. The LTs consisted of ankle, elbow, hip, knee, shoulder and trunk. In the OSTs, gripping, valve-tightening, wrench-turning and pulling/pushing responses were collected. Slow, medium and fast test speeds were used for each bout. Cardiac responses were measured using heart rate monitoring and perceptual measures assessed using Borg’s (1971) RPE scale. The results of the testing showed significant differences in agonist and antagonist responses at all three testing speeds, the only exception being slow speed trunk values (peak torque). Upper- to lower-extremity ratios highlighted a possible weakness in the elbow flexors group, while correlations between LTs and OSTs highlighted the specificity of strength principle, as poor relationships were observed.
- Full Text:
Physiological, perceptual and other performance decrements in combat related tasks following prolonged heavy-load marching
- Authors: Clark, Lisa Anne
- Date: 2000
- Subjects: Performance -- Psychological aspects , Performance standards -- Case studies , Exercise -- Physiological aspects , Exercise -- Psychological aspects , Marching -- Physiological aspects , Soldiers -- Job stress
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5130 , http://hdl.handle.net/10962/d1005209 , Performance -- Psychological aspects , Performance standards -- Case studies , Exercise -- Physiological aspects , Exercise -- Psychological aspects , Marching -- Physiological aspects , Soldiers -- Job stress
- Description: In response to challenging situations physiological and psychological adaptations result in elevated levels of arousal and when these levels are 'optimal' performance is enhanced. There are however, limitations to the amount of physiological and mental stimulation one can tolerate, with cumulative fatigue effects being the outcome when stressful conditions are imposed on the individual over an extended period of time. As a result of the extreme physical and cognitive demands placed on military forces while in combat, with soldiers being thrust into battle and required to make critical life-or-death determining decisions followed by appropriate motor responses, the physical and psychological capabilities of the troops are pushed to maximal limits, often resulting in undesirable decrements in physical and mental performance, with consequential human and materiel losses. Thirty-two soldiers participated in a battery of combat-related field and laboratory tests, first under 'normal' conditions with no prior physical activity and then immediately after the participation of an intensive bout of exercise. Physiological and perceptual responses plus standard of performance were measured at various stages of testing. Results of the Rating of Perceived Exertion (RPE), Body Discomfort Scale and heart rate responses revealed significantly higher levels of psychophysical strai,n in response to the strenuous physical activity. Despite these findings, the electromyographic (EMG) activity and efficiency of the combat-related skills were not negatively affected. Rather, nominal improvements in post-activity performance were noted, specifically response time, and this was attributed to elevated arousal and activation as a result of the exercise that was of sufficient duration to enhance arousal without imposing long term cumulative fatigue effects.
- Full Text:
- Authors: Clark, Lisa Anne
- Date: 2000
- Subjects: Performance -- Psychological aspects , Performance standards -- Case studies , Exercise -- Physiological aspects , Exercise -- Psychological aspects , Marching -- Physiological aspects , Soldiers -- Job stress
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5130 , http://hdl.handle.net/10962/d1005209 , Performance -- Psychological aspects , Performance standards -- Case studies , Exercise -- Physiological aspects , Exercise -- Psychological aspects , Marching -- Physiological aspects , Soldiers -- Job stress
- Description: In response to challenging situations physiological and psychological adaptations result in elevated levels of arousal and when these levels are 'optimal' performance is enhanced. There are however, limitations to the amount of physiological and mental stimulation one can tolerate, with cumulative fatigue effects being the outcome when stressful conditions are imposed on the individual over an extended period of time. As a result of the extreme physical and cognitive demands placed on military forces while in combat, with soldiers being thrust into battle and required to make critical life-or-death determining decisions followed by appropriate motor responses, the physical and psychological capabilities of the troops are pushed to maximal limits, often resulting in undesirable decrements in physical and mental performance, with consequential human and materiel losses. Thirty-two soldiers participated in a battery of combat-related field and laboratory tests, first under 'normal' conditions with no prior physical activity and then immediately after the participation of an intensive bout of exercise. Physiological and perceptual responses plus standard of performance were measured at various stages of testing. Results of the Rating of Perceived Exertion (RPE), Body Discomfort Scale and heart rate responses revealed significantly higher levels of psychophysical strai,n in response to the strenuous physical activity. Despite these findings, the electromyographic (EMG) activity and efficiency of the combat-related skills were not negatively affected. Rather, nominal improvements in post-activity performance were noted, specifically response time, and this was attributed to elevated arousal and activation as a result of the exercise that was of sufficient duration to enhance arousal without imposing long term cumulative fatigue effects.
- Full Text:
The effect of load carriage on selected metabolic and perceptual responses of military personnel
- Authors: Ramabhai, Leena I
- Date: 2000
- Subjects: Marching -- Physiological aspects , Military art and science , Marching -- Psychological aspects , Lifting and carrying
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5111 , http://hdl.handle.net/10962/d1005189
- Description: Taking a multi-disciplinary, integrated approach, the present study sought to examine selected physiological and psycho-physical parameters related to load carriage involving a 12 km march under military conditions. Military constraints hampered, but did not entirely inhibit the secondary aim of the study which concerned the effectiveness of relativising loads in order to normalise responses for all soldiers, irrespective of morphological diversity. Forty three subjects were measured in six groups using a test-retest experimental protocol. They were involved in a rest-broken 12 km march at 4 km.h⁻¹ under 40.5 kg absolute total load and under a relative load of 37% of body mass. Heart rates, ratings of perceived exertion (RPE) as well as area and intensity of discomfort were monitored for all subjects. Ten subjects were measured more extensively with regard to physiology using the Metamax, a portable ergospirometry system that provides all the data needed for a complete functional analysis of lung, heart, circulation and metabolic activity. Physiological responses (fc; fb; V̇T; V̇E; V̇O₂; EE; V̇CO₂; R; T°) indicated subjects were not severely physically taxed and that the loads imposed constituted a sub-maximal demand. Moreover, there appeared to be a limited cumulative effect over the 3.5 h. Data from the first and third hours were similar, while the significantly higher responses in the second hour reflected the challenge of the undulating terrain encountered during this section of the march. All responses during the Relative load conditions mirrored those of the Absolute load condition but, because the demands were less, the trends occurred at a reduced level. Furthermore, the reduction in inter-individual variability indicates that relativised load carriage tends to stress the soldiers in a more uniform manner. All "local" RPE responses were higher than "central" ratings, suggesting soldiers were in good cardiovascular condition and experienced marginally more strain in the lower limbs. There was increased perceived strain corresponding to the increase in gradient, with little cumulative effect over the three hours. The shoulders and feet were the two regions in which most discomfort was experienced; the shoulders being the worst area in the first hour and the feet being rated the worst after the third hour of marching. This study clearly demonstrates the probability of a significant improvement in mean combat-readiness following loaded marching by showing that, if loads are set at levels commensurate with individual capabilities to carry them without undue strain, unnecessary physical demands experienced by smaller, more gracile soldiers are reduced.
- Full Text:
- Authors: Ramabhai, Leena I
- Date: 2000
- Subjects: Marching -- Physiological aspects , Military art and science , Marching -- Psychological aspects , Lifting and carrying
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5111 , http://hdl.handle.net/10962/d1005189
- Description: Taking a multi-disciplinary, integrated approach, the present study sought to examine selected physiological and psycho-physical parameters related to load carriage involving a 12 km march under military conditions. Military constraints hampered, but did not entirely inhibit the secondary aim of the study which concerned the effectiveness of relativising loads in order to normalise responses for all soldiers, irrespective of morphological diversity. Forty three subjects were measured in six groups using a test-retest experimental protocol. They were involved in a rest-broken 12 km march at 4 km.h⁻¹ under 40.5 kg absolute total load and under a relative load of 37% of body mass. Heart rates, ratings of perceived exertion (RPE) as well as area and intensity of discomfort were monitored for all subjects. Ten subjects were measured more extensively with regard to physiology using the Metamax, a portable ergospirometry system that provides all the data needed for a complete functional analysis of lung, heart, circulation and metabolic activity. Physiological responses (fc; fb; V̇T; V̇E; V̇O₂; EE; V̇CO₂; R; T°) indicated subjects were not severely physically taxed and that the loads imposed constituted a sub-maximal demand. Moreover, there appeared to be a limited cumulative effect over the 3.5 h. Data from the first and third hours were similar, while the significantly higher responses in the second hour reflected the challenge of the undulating terrain encountered during this section of the march. All responses during the Relative load conditions mirrored those of the Absolute load condition but, because the demands were less, the trends occurred at a reduced level. Furthermore, the reduction in inter-individual variability indicates that relativised load carriage tends to stress the soldiers in a more uniform manner. All "local" RPE responses were higher than "central" ratings, suggesting soldiers were in good cardiovascular condition and experienced marginally more strain in the lower limbs. There was increased perceived strain corresponding to the increase in gradient, with little cumulative effect over the three hours. The shoulders and feet were the two regions in which most discomfort was experienced; the shoulders being the worst area in the first hour and the feet being rated the worst after the third hour of marching. This study clearly demonstrates the probability of a significant improvement in mean combat-readiness following loaded marching by showing that, if loads are set at levels commensurate with individual capabilities to carry them without undue strain, unnecessary physical demands experienced by smaller, more gracile soldiers are reduced.
- Full Text:
The effects of night work and task diversification on efficiency of performance
- Authors: Munton, Lynne Kerry
- Date: 1998
- Subjects: Night work -- Evaluation , Shift systems , Performance
- Language: English
- Type: text , Thesis , Masters , MA
- Identifier: vital:5175 , http://hdl.handle.net/10962/d1018253
- Description: This study investigated the effects of night work on performance efficiency. Night work is generally acknowledged to impair performance, yet much research has contradicted this assertion. The feasibility of including brief periods of physical activity to stimulate arousal within mentally demanding work shifts was also evaluated. Thirty six postgraduate volunteers were assigned to either the cognitive tasks (CT) or cognitive and motor tasks (CMT) group. All subjects performed three psycho-motor tests, using the Vienna Test System, at midday and midnight. The CMT group performed a short cycling activity before each test. Heart rate responses served as physiological measures, the Perceived Strain Scale was used to quantify individual perceptions of strain and performance efficiency was assessed in terms of speed and accuracy. Although several trends were apparent, no significant differences (p < 0.05) were revealed with respect to the three performance variables between the midday and midnight test sessions, or between the CT and CMT subjects, other than the higher heart rates recorded in the CMT group. In summary, neither time of day nor physical activity were found to affect performance within the controlled environment of this study.
- Full Text:
- Authors: Munton, Lynne Kerry
- Date: 1998
- Subjects: Night work -- Evaluation , Shift systems , Performance
- Language: English
- Type: text , Thesis , Masters , MA
- Identifier: vital:5175 , http://hdl.handle.net/10962/d1018253
- Description: This study investigated the effects of night work on performance efficiency. Night work is generally acknowledged to impair performance, yet much research has contradicted this assertion. The feasibility of including brief periods of physical activity to stimulate arousal within mentally demanding work shifts was also evaluated. Thirty six postgraduate volunteers were assigned to either the cognitive tasks (CT) or cognitive and motor tasks (CMT) group. All subjects performed three psycho-motor tests, using the Vienna Test System, at midday and midnight. The CMT group performed a short cycling activity before each test. Heart rate responses served as physiological measures, the Perceived Strain Scale was used to quantify individual perceptions of strain and performance efficiency was assessed in terms of speed and accuracy. Although several trends were apparent, no significant differences (p < 0.05) were revealed with respect to the three performance variables between the midday and midnight test sessions, or between the CT and CMT subjects, other than the higher heart rates recorded in the CMT group. In summary, neither time of day nor physical activity were found to affect performance within the controlled environment of this study.
- Full Text:
The effects of whole body immersion in cold water upon subsequent terrestrial aerobic performance : a study in hypothermia
- Authors: Manley, Elizabeth
- Date: 1998 , 2013-09-04
- Subjects: Hypothermia , Cold -- Physiological effect , Temperature -- Physiological effect , Aerobic exercises , Cryobiology
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5143 , http://hdl.handle.net/10962/d1007458 , Hypothermia , Cold -- Physiological effect , Temperature -- Physiological effect , Aerobic exercises , Cryobiology
- Description: This study examined the extent to which physiological and psychological concomitants of aerobic terrestrial performance were affected by body cooling of varying degrees induced by cold water immersion (CWI). Thirteen male and 13 female subjects underwent three randomly assigned 30 min treadmill runs: a control run without prior manipulation of the subjects' thermal status and the same exercise after "central" (core temperature 1°C below pre-immersion) and "peripheral" cooling (skin heat loss 100kcal.m⁻².h⁻¹). During treadmill runs core temperature was measured, together with chest, leg, arm and hand temperatures, from which mean skin temperature (T [subscript]s[subscript]k) and mean body temperature (T[subscript]b) were calculated. Heart rate, oxygen consumption (VO₂,), carbon dioxide production (VCO₂), minute ventilation (V₂ (BTPS)), breathing frequency (f), cadence and ratings of perceived exertion (RPE) and thermal sensation (PTS) were also measured. Both central and peripheral cooling resulted in significantly reduced T[subscript]r[subscript]e (males : control 37.9±0. 3°C; central cooling : 36.8±0.5°C; peripheral cooling: 37.5±0.4°C; females: control: 37.9±0.4°C; central cooling: 37.2±0.5; p<0.05) during subsequent treadmill running, except following peripheral cooling for females (37.9±0.3°C) . For males and females T[subscript]s[subscript]k was lower following peripheral cooling than control values and lowest after central cooling (males: control: 30.0±1.3°C; central cooling: 36.8±0.5°C; peripheral cooling: 37.5±0.4°C; females: control: 30.5±1.2°C; central cooling: 25.9±1.8°C; peripheral cooling: 26.9±1.9°C; p<0.05). Female subjects experienced significantly higher T[subscript]r[subscript]e than males following central and peripheral cooling and a lower T[subscript]s[subscript]k following central cooling. Females experienced less of an increase in heart rate than males during exercise following central and peripheral cooling (control: l57.7±23.7b.min⁻¹; central cooling: 143.5±20.5b.min⁻¹; peripheral cooling 151.7±16.7b.min⁻¹; p<0 .05). Male responses were the same following central cooling but higher for peripheral cooling than control values (control: 139.1±7.3b.min⁻¹; central cooling 134.7±17.5b.min⁻¹; peripheral cooling: 145.0±16.4b.min⁻¹; p<0.05). These data indicate a depression in cardiovascular function for females following peripheral cooling that was not apparent for males. The VO₂ was not different between tests for males; only peripheral cooling resulted in a raised VO₂ of 28.6±3 .3ml.kg⁻¹.min⁻¹ (p<0 .05) for females compared to 27.6±2.6ml.kg⁻¹.min⁻¹ (control). A biphasic response was evident for VO₂ VCO₂ and V[subscript]B (BTPS). For both sexes overall RPE was lower for peripheral cooling (males: 9.4±1.9; females: 8.7±1.3; p<0 .05) than for control and central cooling. Central RPE was only changed for females following peripheral cooling. Changes in cadence and step length together with the effect of low skin and leg temperatures resulted in higher local RPE for females after central cooling (9.6±1.2; p<0.05) than control (9.4±1.9) and peripheral cooling (8.9±1.2 ). Males and females rated the same ambient temperature during the same exercise lower after peripheral cooling (males: 4.6±1.5; females : 5.3±1.3) than control values and lower still after central cooling (males: 3. 8±1.8; females: 2 .7±l. 5) In this study T[subscript]s[subscript]k was the primary determinant of PTS after precooling. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Authors: Manley, Elizabeth
- Date: 1998 , 2013-09-04
- Subjects: Hypothermia , Cold -- Physiological effect , Temperature -- Physiological effect , Aerobic exercises , Cryobiology
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5143 , http://hdl.handle.net/10962/d1007458 , Hypothermia , Cold -- Physiological effect , Temperature -- Physiological effect , Aerobic exercises , Cryobiology
- Description: This study examined the extent to which physiological and psychological concomitants of aerobic terrestrial performance were affected by body cooling of varying degrees induced by cold water immersion (CWI). Thirteen male and 13 female subjects underwent three randomly assigned 30 min treadmill runs: a control run without prior manipulation of the subjects' thermal status and the same exercise after "central" (core temperature 1°C below pre-immersion) and "peripheral" cooling (skin heat loss 100kcal.m⁻².h⁻¹). During treadmill runs core temperature was measured, together with chest, leg, arm and hand temperatures, from which mean skin temperature (T [subscript]s[subscript]k) and mean body temperature (T[subscript]b) were calculated. Heart rate, oxygen consumption (VO₂,), carbon dioxide production (VCO₂), minute ventilation (V₂ (BTPS)), breathing frequency (f), cadence and ratings of perceived exertion (RPE) and thermal sensation (PTS) were also measured. Both central and peripheral cooling resulted in significantly reduced T[subscript]r[subscript]e (males : control 37.9±0. 3°C; central cooling : 36.8±0.5°C; peripheral cooling: 37.5±0.4°C; females: control: 37.9±0.4°C; central cooling: 37.2±0.5; p<0.05) during subsequent treadmill running, except following peripheral cooling for females (37.9±0.3°C) . For males and females T[subscript]s[subscript]k was lower following peripheral cooling than control values and lowest after central cooling (males: control: 30.0±1.3°C; central cooling: 36.8±0.5°C; peripheral cooling: 37.5±0.4°C; females: control: 30.5±1.2°C; central cooling: 25.9±1.8°C; peripheral cooling: 26.9±1.9°C; p<0.05). Female subjects experienced significantly higher T[subscript]r[subscript]e than males following central and peripheral cooling and a lower T[subscript]s[subscript]k following central cooling. Females experienced less of an increase in heart rate than males during exercise following central and peripheral cooling (control: l57.7±23.7b.min⁻¹; central cooling: 143.5±20.5b.min⁻¹; peripheral cooling 151.7±16.7b.min⁻¹; p<0 .05). Male responses were the same following central cooling but higher for peripheral cooling than control values (control: 139.1±7.3b.min⁻¹; central cooling 134.7±17.5b.min⁻¹; peripheral cooling: 145.0±16.4b.min⁻¹; p<0.05). These data indicate a depression in cardiovascular function for females following peripheral cooling that was not apparent for males. The VO₂ was not different between tests for males; only peripheral cooling resulted in a raised VO₂ of 28.6±3 .3ml.kg⁻¹.min⁻¹ (p<0 .05) for females compared to 27.6±2.6ml.kg⁻¹.min⁻¹ (control). A biphasic response was evident for VO₂ VCO₂ and V[subscript]B (BTPS). For both sexes overall RPE was lower for peripheral cooling (males: 9.4±1.9; females: 8.7±1.3; p<0 .05) than for control and central cooling. Central RPE was only changed for females following peripheral cooling. Changes in cadence and step length together with the effect of low skin and leg temperatures resulted in higher local RPE for females after central cooling (9.6±1.2; p<0.05) than control (9.4±1.9) and peripheral cooling (8.9±1.2 ). Males and females rated the same ambient temperature during the same exercise lower after peripheral cooling (males: 4.6±1.5; females : 5.3±1.3) than control values and lower still after central cooling (males: 3. 8±1.8; females: 2 .7±l. 5) In this study T[subscript]s[subscript]k was the primary determinant of PTS after precooling. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
Three dimensional kinetic analysis of asymmetrical lifting
- Authors: Li, Jian-Chuan
- Date: 1996
- Subjects: Lifting and carrying , Human engineering , Materials handling , Manual work
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5174 , http://hdl.handle.net/10962/d1018240
- Description: Manual lifting is dynamic in nature and involves asymmetrical loading of the human body. This study investigated kinematic and kinetic characteristics of asymmetrical lifting in three dimensions, and then constructed a 3-D biomechanical force model of the lower back which is capable of quantifying torsional stress on the human spine. Eleven healthy adult male manual workers were recruited as subjects and lifted a 1 Okg load placed at the sagittal plane (0°) and at 30°, 60° and 90° lateral planes to the right, from 150mm and 500mm initial lift heights, respectively, to an 800mm high bench in the sagittal plane. Subjects' spinal motions and the trajectorial movements of the load in three-dimensional space were monitored simultaneously by a Lumbar Motion Monitor and a V-scope Motion Analyzer. Generally, the spinal motion factors increased as a function of increasing task asymmetry and differed (p < 0.05) between the lower (150mm) and higher (500mm) levels in the sagittal plane. In all asymmetrical conditions the motion factors showed a dramatic increase at the 500mm level compared to the increase at the 150mm level. The rates of increase in the horizontal and frontal planes were greater than those in the sagittal plane. Task asymmetry had a significant effect on the spinal kinematic parameters in the frontal plane at the two lift heights, and only at the high level (500mm) in the horizontal plane, with exception of average acceleration . Initial lift height exerted a significant effect on peak velocity and acceleration in both frontal and horizontal planes and on range of motion in the horizontal plane. Kinetic characteristics of the object being lifted in three-dimensions increased with an increase in task asymmetry. The increase was more dramatic in the lateral direction in the horizontal plane. However, motion factors in the vertical direction dominated the full range of the lift, irrespective of task asymmetry and lift height. The kinetic measures differed (p < 0.05) between the lower ( 1 50mm) and the higher (500mm) levels in the vertical direction except for average force. Task asymmetry had a significant effect on dynamic measures in the anterior-posterior direction. Both task asymmetry and lift height had a significant effect on dynamic motion factors in the lateral direction. From insights gained in the empirical study a three-dimensional biomechanical force model of the lower back was constructed based on a mechanism of muscle force re-orientation in the lumbar region. Acknowledging that the lower back is designed to be able to rotate around its longitudinal axis, the proposed model accounts for compression and shear forces and a torsional moment. The model has similar predictability to Schultz and Andersson's (1981) model when the human trunk exerts only a flexion-extension moment in the sagittal plane, but additionally predicts dramatic increases in shear forces, oblique muscle forces and torsional moment under asymmetrical lifting conditions which the Schultz-Andersson model does not. The increase rates in these forces and moment are not linearly related over task asymmetric angle.
- Full Text:
- Authors: Li, Jian-Chuan
- Date: 1996
- Subjects: Lifting and carrying , Human engineering , Materials handling , Manual work
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5174 , http://hdl.handle.net/10962/d1018240
- Description: Manual lifting is dynamic in nature and involves asymmetrical loading of the human body. This study investigated kinematic and kinetic characteristics of asymmetrical lifting in three dimensions, and then constructed a 3-D biomechanical force model of the lower back which is capable of quantifying torsional stress on the human spine. Eleven healthy adult male manual workers were recruited as subjects and lifted a 1 Okg load placed at the sagittal plane (0°) and at 30°, 60° and 90° lateral planes to the right, from 150mm and 500mm initial lift heights, respectively, to an 800mm high bench in the sagittal plane. Subjects' spinal motions and the trajectorial movements of the load in three-dimensional space were monitored simultaneously by a Lumbar Motion Monitor and a V-scope Motion Analyzer. Generally, the spinal motion factors increased as a function of increasing task asymmetry and differed (p < 0.05) between the lower (150mm) and higher (500mm) levels in the sagittal plane. In all asymmetrical conditions the motion factors showed a dramatic increase at the 500mm level compared to the increase at the 150mm level. The rates of increase in the horizontal and frontal planes were greater than those in the sagittal plane. Task asymmetry had a significant effect on the spinal kinematic parameters in the frontal plane at the two lift heights, and only at the high level (500mm) in the horizontal plane, with exception of average acceleration . Initial lift height exerted a significant effect on peak velocity and acceleration in both frontal and horizontal planes and on range of motion in the horizontal plane. Kinetic characteristics of the object being lifted in three-dimensions increased with an increase in task asymmetry. The increase was more dramatic in the lateral direction in the horizontal plane. However, motion factors in the vertical direction dominated the full range of the lift, irrespective of task asymmetry and lift height. The kinetic measures differed (p < 0.05) between the lower ( 1 50mm) and the higher (500mm) levels in the vertical direction except for average force. Task asymmetry had a significant effect on dynamic measures in the anterior-posterior direction. Both task asymmetry and lift height had a significant effect on dynamic motion factors in the lateral direction. From insights gained in the empirical study a three-dimensional biomechanical force model of the lower back was constructed based on a mechanism of muscle force re-orientation in the lumbar region. Acknowledging that the lower back is designed to be able to rotate around its longitudinal axis, the proposed model accounts for compression and shear forces and a torsional moment. The model has similar predictability to Schultz and Andersson's (1981) model when the human trunk exerts only a flexion-extension moment in the sagittal plane, but additionally predicts dramatic increases in shear forces, oblique muscle forces and torsional moment under asymmetrical lifting conditions which the Schultz-Andersson model does not. The increase rates in these forces and moment are not linearly related over task asymmetric angle.
- Full Text:
The effects of relative speed on selected physiological, kinematic and psychological responses at walk-to-run and run-to-walk interfaces.
- Authors: Candler, Paul David
- Date: 1987
- Subjects: Walking -- Physiological aspects , Running -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5164 , http://hdl.handle.net/10962/d1016081
- Description: [Conclusions] l) The two forms of human locomotion, walking and running, are distinctly different and in evaluating these gait patterns consideration must be given to this fact. 2) The impression created by the energy cost curves, that there is a single locomotor interface for both walking and running is a false one . There are two distinctly different locomotor interfaces, the walk-to-run interface and the run-to-walk interface. The former appears to correspond with the "metabolic intersection point" and therefore has some metabolic significance. The latter appears to be merely an "overshoot" of the walk-to-run interface and presently has no apparent metabolic significance. 3) Because the walk-to-run interface speed corresponds with the intersection point of the energy cost curves, physiological responses to walking and running at this speed do not differ significantly. However, cadence and stride length patterns for these two locomotor patterns are distinctly different at this point. 4) The identification of single physiological or kinematic factors during perceptions of exertion in any given situation is an extremely difficult if not impossible task. Perceived exertion should therefore be considered a multi-factorial concept and should be evaluated as such. 5) The use of relative speed as a technique for reducing inter-subject variability in physiological and kinematic factors is worthless unless diverse ranges in morphological linearity are a characteristic of one's subject pool
- Full Text:
- Authors: Candler, Paul David
- Date: 1987
- Subjects: Walking -- Physiological aspects , Running -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5164 , http://hdl.handle.net/10962/d1016081
- Description: [Conclusions] l) The two forms of human locomotion, walking and running, are distinctly different and in evaluating these gait patterns consideration must be given to this fact. 2) The impression created by the energy cost curves, that there is a single locomotor interface for both walking and running is a false one . There are two distinctly different locomotor interfaces, the walk-to-run interface and the run-to-walk interface. The former appears to correspond with the "metabolic intersection point" and therefore has some metabolic significance. The latter appears to be merely an "overshoot" of the walk-to-run interface and presently has no apparent metabolic significance. 3) Because the walk-to-run interface speed corresponds with the intersection point of the energy cost curves, physiological responses to walking and running at this speed do not differ significantly. However, cadence and stride length patterns for these two locomotor patterns are distinctly different at this point. 4) The identification of single physiological or kinematic factors during perceptions of exertion in any given situation is an extremely difficult if not impossible task. Perceived exertion should therefore be considered a multi-factorial concept and should be evaluated as such. 5) The use of relative speed as a technique for reducing inter-subject variability in physiological and kinematic factors is worthless unless diverse ranges in morphological linearity are a characteristic of one's subject pool
- Full Text: