The effects of the type of rest breaks on return-to-task performance in semi-automated tasks with varying complexities
- Authors: Hoyi, Zandile
- Date: 2017
- Subjects: Rest periods , Rest periods -- Physiological effect , Human-robot interaction , Aeronautics -- Human factors , Human engineering , Drowsiness
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/44490 , vital:25412
- Description: Automation in the aviation industry is acknowledged as a useful tool in reducing pilot workload (Hoh, Smith & Hinton, 1987; Beringer & Harris Jr., 1999). Typically, the role of the pilot (operator) shifts from active participation in a process to a task of monitoring the system with the resumption of control should the automation ‘fail’ (Byrne & Parasuraman, 1996). Unfortunately, the skills necessary to do so would likely degrade from non-use, during this process (Landry, 2012). This project investigates the “attentional demands” for the human operator during interaction with semi-automated operations of the flight. According to Dr Abbott (1996), FAA human factors specialist, one of the problems causing disharmony between crews and their automated systems is the incorrect upset recovery, owing to the human being out-of-the-loop (OOTL) from the system. Recovery, or rather return to task, is the ability of the pilot to loop back into control, once situational awareness has been decreased due to lack of alertness and a decrease in arousal. Different types of rest tasks are commonly prescribed fatigue countermeasures in the industrial setting and have been showed to elicit beneficial effects on prolonged human performance. Understanding the effects of different rest break activity and time out-of-the-loop during semi-automated flying on return to task performance has been adequately studied, thus highlighting its importance in the context of flight safety. The present study requested participants to perform a tracking task in a laboratory where they changed from activity (30 minutes) to a break (2 vs. 30 minutes) and back to the activity (20 minutes). The task varied in the complexity of the activity (pure tracking vs. tracking plus memory plus rule-based decision making), the type of break (passive rest vs. actively supervising) and the duration of the break (2 minutes vs. 30 minutes). Performance was measured as effective response time in the tracking task and number of correct responses to secondary cognitive tasks. Physiological measures included heart rate (HR), heart rate variability (HRV- time and frequency-domain), eye blink frequency and duration. The Karolinska Sleepiness Scale was used as a subjective measure. With regards to the most appropriate rest break tasks, the study concluded that active, administrative tasks, which allowed the operator to maintain some form of situational awareness by monitoring the automated system, achieved favourable effects of being more alert than the passive rest break of being disengaged from the system. In terms of the most appropriate rest break durations, the shorter duration of being out-of-the-loop from controlling the system proved to be more advantageous than the longer out-of-the-loop duration. In looking at the workload levels of arousal, the results suggest that the higher workload level is better at maintaining the alertness of operators. This study functions as a foundational framework for future investigations around the topic of human-automation interaction, looking specifically at return-to-task performance.
- Full Text:
- Authors: Hoyi, Zandile
- Date: 2017
- Subjects: Rest periods , Rest periods -- Physiological effect , Human-robot interaction , Aeronautics -- Human factors , Human engineering , Drowsiness
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/44490 , vital:25412
- Description: Automation in the aviation industry is acknowledged as a useful tool in reducing pilot workload (Hoh, Smith & Hinton, 1987; Beringer & Harris Jr., 1999). Typically, the role of the pilot (operator) shifts from active participation in a process to a task of monitoring the system with the resumption of control should the automation ‘fail’ (Byrne & Parasuraman, 1996). Unfortunately, the skills necessary to do so would likely degrade from non-use, during this process (Landry, 2012). This project investigates the “attentional demands” for the human operator during interaction with semi-automated operations of the flight. According to Dr Abbott (1996), FAA human factors specialist, one of the problems causing disharmony between crews and their automated systems is the incorrect upset recovery, owing to the human being out-of-the-loop (OOTL) from the system. Recovery, or rather return to task, is the ability of the pilot to loop back into control, once situational awareness has been decreased due to lack of alertness and a decrease in arousal. Different types of rest tasks are commonly prescribed fatigue countermeasures in the industrial setting and have been showed to elicit beneficial effects on prolonged human performance. Understanding the effects of different rest break activity and time out-of-the-loop during semi-automated flying on return to task performance has been adequately studied, thus highlighting its importance in the context of flight safety. The present study requested participants to perform a tracking task in a laboratory where they changed from activity (30 minutes) to a break (2 vs. 30 minutes) and back to the activity (20 minutes). The task varied in the complexity of the activity (pure tracking vs. tracking plus memory plus rule-based decision making), the type of break (passive rest vs. actively supervising) and the duration of the break (2 minutes vs. 30 minutes). Performance was measured as effective response time in the tracking task and number of correct responses to secondary cognitive tasks. Physiological measures included heart rate (HR), heart rate variability (HRV- time and frequency-domain), eye blink frequency and duration. The Karolinska Sleepiness Scale was used as a subjective measure. With regards to the most appropriate rest break tasks, the study concluded that active, administrative tasks, which allowed the operator to maintain some form of situational awareness by monitoring the automated system, achieved favourable effects of being more alert than the passive rest break of being disengaged from the system. In terms of the most appropriate rest break durations, the shorter duration of being out-of-the-loop from controlling the system proved to be more advantageous than the longer out-of-the-loop duration. In looking at the workload levels of arousal, the results suggest that the higher workload level is better at maintaining the alertness of operators. This study functions as a foundational framework for future investigations around the topic of human-automation interaction, looking specifically at return-to-task performance.
- Full Text:
Awkward working postures and precision performance as an example of the relationship between ergonomics and production quality
- Ngcamu, Nokubonga Slindele (Sma)
- Authors: Ngcamu, Nokubonga Slindele (Sma)
- Date: 2009
- Subjects: Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5105 , http://hdl.handle.net/10962/d1005183 , Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Description: Ergonomics aims to improve worker health and enhance productivity and quality. Knowledge and practical evidence of this relationship would be instrumental for optimising organisational performance particularly in industrially developing countries where the discipline is still in its developmental stages. Therefore this thesis set out to analyse the relationship between ergonomics deficiencies and performance. A survey was first conducted to establish the severity of quality problems in the South African manufacturing industry and to determine if these were related to Ergonomic deficiencies. The results indicated that quality problems continue to plague industry, a challenge associated with huge cost implications. Furthermore organisations were not cognisant of the fact that ergonomics deficiencies such as poor workstation design and awkward or constrained working postures are a major contributing factor to poor quality and performance decrements. This demonstrates that much is yet to be done in raising awareness about the benefits of ergonomics in South Africa and other industrially developing countries. However, for this to be effective, tangible evidence of these purported benefits is required. In lieu of this, a laboratory study was then conducted to establish the relationship between awkward working postures and the performance of precision tasks. Acknowledging that the task and the worker are interrelated elements, the impact of precision task demands on the postural strain experienced by the human was also investigated. A high and low precision task quantified positional precision while a force task (combination of pushing and pulling) was utilised to assess the ability to maintain a precise force over time. These three tasks were performed in eight different postures; namely seated, standing, stooping 300 and 600, working overhead, lying supine, and twisting to either side. A combination of the tasks and postures resulted in 24 experimental conditions that were tested on forty eight healthy male and female participants. The performance related dependent variables were movement time, deviation from the centre of the target, and the trend/slope followed by the force exerted. Muscle activity of eight arm, shoulder and back muscles, iii supplemented with heart rate and local ratings of perceived exertion, were utilised to quantify the impact of the tasks and the postures on the individual. The results revealed that awkward working postures do in fact influence performance outcomes. In this regard, awkward working postures (such as overhead work and lying supine and stooping) were evidenced to significantly affect movement time, deviations from the target and the ability to maintain a constant force over time. These variables have a direct relationship with organisational priorities such as productivity and quality. Furthermore, the results indicated that high precision demands augment postural strain elicited through high muscle activity responses and may have negative implications for the precipitation of musculoskeletal disorders. Essentially, the work done on this thesis reflected the complex nature of ergonomics by drawing on both macro and micro-ergonomics approaches. In so doing, challenges perceived to be relevant to industry as reported by organisations formed the foundation for further laboratory studies. Therefore, more collaborative research and knowledge transfer between industry and ergonomics researchers is a necessity particularly in industrially developing countries where ergonomics is still in its developmental stages.
- Full Text:
- Authors: Ngcamu, Nokubonga Slindele (Sma)
- Date: 2009
- Subjects: Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5105 , http://hdl.handle.net/10962/d1005183 , Human engineering , Posture , Posture disorders , Musculoskeletal system -- Diseases , Work -- Physiological aspects
- Description: Ergonomics aims to improve worker health and enhance productivity and quality. Knowledge and practical evidence of this relationship would be instrumental for optimising organisational performance particularly in industrially developing countries where the discipline is still in its developmental stages. Therefore this thesis set out to analyse the relationship between ergonomics deficiencies and performance. A survey was first conducted to establish the severity of quality problems in the South African manufacturing industry and to determine if these were related to Ergonomic deficiencies. The results indicated that quality problems continue to plague industry, a challenge associated with huge cost implications. Furthermore organisations were not cognisant of the fact that ergonomics deficiencies such as poor workstation design and awkward or constrained working postures are a major contributing factor to poor quality and performance decrements. This demonstrates that much is yet to be done in raising awareness about the benefits of ergonomics in South Africa and other industrially developing countries. However, for this to be effective, tangible evidence of these purported benefits is required. In lieu of this, a laboratory study was then conducted to establish the relationship between awkward working postures and the performance of precision tasks. Acknowledging that the task and the worker are interrelated elements, the impact of precision task demands on the postural strain experienced by the human was also investigated. A high and low precision task quantified positional precision while a force task (combination of pushing and pulling) was utilised to assess the ability to maintain a precise force over time. These three tasks were performed in eight different postures; namely seated, standing, stooping 300 and 600, working overhead, lying supine, and twisting to either side. A combination of the tasks and postures resulted in 24 experimental conditions that were tested on forty eight healthy male and female participants. The performance related dependent variables were movement time, deviation from the centre of the target, and the trend/slope followed by the force exerted. Muscle activity of eight arm, shoulder and back muscles, iii supplemented with heart rate and local ratings of perceived exertion, were utilised to quantify the impact of the tasks and the postures on the individual. The results revealed that awkward working postures do in fact influence performance outcomes. In this regard, awkward working postures (such as overhead work and lying supine and stooping) were evidenced to significantly affect movement time, deviations from the target and the ability to maintain a constant force over time. These variables have a direct relationship with organisational priorities such as productivity and quality. Furthermore, the results indicated that high precision demands augment postural strain elicited through high muscle activity responses and may have negative implications for the precipitation of musculoskeletal disorders. Essentially, the work done on this thesis reflected the complex nature of ergonomics by drawing on both macro and micro-ergonomics approaches. In so doing, challenges perceived to be relevant to industry as reported by organisations formed the foundation for further laboratory studies. Therefore, more collaborative research and knowledge transfer between industry and ergonomics researchers is a necessity particularly in industrially developing countries where ergonomics is still in its developmental stages.
- Full Text:
- «
- ‹
- 1
- ›
- »