Synthesis of indium phthalocyanines for photodynamic antimicrobial chemotherapy and photo-oxidation of pollutants
- Authors: Sindelo, Azole
- Date: 2019
- Subjects: Phthalocyanines , Azo dyes , Indium compounds , Photochemotherapy , Nanoparticles , Photodegradation , Pollutants , Water -- Purification
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/67581 , vital:29116
- Description: Indium (III) octacarboxyl phthalocyanine (ClInOCPc) alone and when conjugated to magnetic nanoparticles (MNP-ClInOCPc), 2(3),9(10),16(17),23(24)-octapyridylsulfanyl phthalocyaninato chloroindium (III) (ClInOPyPc) and its quaternized derivative 2(3),9(10),16(17),23(24)-octamethylpyridylsulfanyl phthalocyaninato chloroindium (III) (ClInOMePyPc) were synthesized. All Pcs were tested for both photodynamic antimicrobial chemotherapy (PACT) of an unknown water sample and photo-degradation of methyl red (MR). The singlet quantum yield (ΦΔ) for the ClInOCPc and MNP-ClInOCPc in PAN polymer fibers were 0.36 and 0.20 respectively using ADMA as a quencher in water. The photo-inactivation of bacteria in a water sample with unknown microbes was tested, with the MNP-ClInOCPc inactivating 90.6 % of the microbes and the ClInOCPc with 84.8 %. When embedded to the polymer, there was 48% bacterial clearance for ClInOCPc and 64% clearance for the MNP-ClInOCPc. The rate of degradation of MR increased with decrease of the MR concentration, with the MNP-ClInOCPc having the fastest rate. For ClInOPyPc and ClInOMePyPc, the singlet quantum yields were 0.46 and 0.33 in dimethylformamide (DMF), respectively. The PACT activity of ClInOMePyPc (containing 8 positive charges) was compared to those of 9(10),16(17),23(24)-tri-N-methyl-4-pyridylsulfanyl-2(3)-(4-aminophenoxy) phthalocyaninato chloro indium (III) triiodide (1) (containing 3 positive charges) and 2-[4-(N-methylpyridyloxy) phthalocyaninato] chloroindium (III) iodide (2) (containing 4 positive charges). When comparing ClInOMePyPc, 1 and 2, the largest log reduction for E. coli were obtained for complex 2 containing four positive charges hence showing it is not always the charge that determines the PACT activity, but the bridging atom in the phthalocyanine plays a role.
- Full Text:
The preparation of BODIPY and porphyrin dyes and their cyclodextrin inclusion complexes and Pluronic® F-127 encapsulation micelles for use in PDT and PACT
- Authors: Molupe, Nthabeleng
- Date: 2019
- Subjects: Dyes and dyeing -- Chemistry , Drug delivery systems , Fluorescence spectroscopy , Cancer -- Photochemotherapy , Photosensitizing compounds -- Therapeutic use , Cyclodextrins -- Biotechnology , Nanoparticles
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/117574 , vital:34528
- Description: Several novel BODIPY dyes ((4,4′-difluoro-1,7-tetramethyl-3,5-(3-dithiophene)-2,6-diiodo-8-(4-dimethylamino)-4-bora-3a,4a-diaza-s-indacene (1c), 4,4′-difluoro-1,7-tetramethyl-3,5-(3 dithiophene)-2,6-diiodo-8-(4-methylthio)-4-bora-3a,4a-diaza-s-indacene (3c) and 4,4′-difluoro-1,7-tetramethyl-3,5-(4-dibenzyloxybenzene)-2,6-diiodo-8-(4-methylbenzoate)-4 bora-3a,4a-diaza-s-indacene (4c)) and porphyrins (tetraacenaphthylporphyrin (7a) and Sn(IV) tetraacenaphthylporphyrin (7b)) were synthesized and characterized. Previously reported BODIPY dyes (4,4′-difluoro-1,7-tetramethyl-3,5-(2-dihydroxy)-2,6-diiodo-8-(4-bromo)-4-bora-3a,4a-diaza-s-indacene (5) and 4,4′-difluoro-1,7-tetramethyl-3,5-(2-dithiophene)-2,6-diiodo-8-(phenyl)-4-bora-3a,4a-diaza-s-indacene (6)) were also used. Pluronic® F-127 and cyclodextrins were used as solubilizing drug delivery agents for the synthesized BODIPY dyes. The encapsulation of BODIPY dyes with Pluronic® F-127 micelles improved the water solubility of the BODIPY 5. Further modification of Pluronic® F-127 by coating with folate-functionalized chitosan for targeted delivery of BODIPY 1c and 6 was explored. The BODIPY dyes and their encapsulation complexes exhibited significant inhibition of human MCF-7 breast cancer cell growth. When cyclodextrins were used as nanocarriers, the inclusion complexes of BODIPY 4c with mβCD were found to enhance the water-solubility of the dye. Greater photoinactivation of Staphylococcus aureus was observed for the inclusion complexes when compared to the effect of solutions of non-complexed BODIPY 4c. The cyclodextrin inclusion complexes of porphyrin 7b with mβCD were also found to enhance the water-solubility of 7b. When the photodynamic effect was evaluated, solutions of the porphyrin alone and their inclusion complexes were found to have significant photodynamic effects against human MCF-7 breast cancer cells.
- Full Text:
BODIPY dyes for singlet oxygen and optical limiting applications
- Authors: Harris, Jessica
- Date: 2018
- Subjects: Photosensitizing compounds , Active oxygen -- Physiological effect , Photochemotherapy , Cancer -- Treatment , Nonlinear optics , BODIPY (Boron-dipyrromethene)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/58002 , vital:27014
- Description: A series of structurally related BODIPY dyes were synthesised and characterised. Their photophysical properties were studied in order to determine whether they would be suitable candidates for use as photosensitisers in the photodynamic therapy (PDT) treatment of cancer. The synthesis of two highly fluorescent BODIPY cores was achieved via the acid-catalysed condensation of a pyrrole and a functionalised aldehyde. In order to promote intersystem crossing, and hence improve the singlet oxygen generation of these dyes, bromine atoms were added at the 2,6-positions of the BODIPY core. These dibrominated analogues showed good singlet oxygen quantum yields, and excellent photostability in ethanol. In order to red-shift the main spectral bands of the BODIPY dyes towards the therapeutic window, vinyl/ styryl groups were introduced at the 3-, 5-, and 7-positions via a modified Knoevengal condensation reaction. The addition of vinyl/ styryl groups to the BODIPY core caused an increase in fluorescence quantum yield as well as a decrease in singlet oxygen quantum yield with respect to the dibrominated analogues. However, two of the red-shifted BODIPY dyes still showed moderate singlet oxygen quantum yields. The use of BODIPY dyes in nonlinear optics (NLO) was explored. The nonlinear optical characterisations and optical limiting properties of a series of 3,5-dithienylenevinylene BODIPY dyes were studied, both in dimethylformamide (DMF) solution and when embedded in poly(bisphenol A carbonate) (PBC) as thin films. The 3,5-dithienylenevinylene BODIPY dyes showed typical nonlinear absorption behaviour, with reverse saturable absorption (RSA) profiles, indicating that they have potential as optical limiters. The second-order hyperpolarizability (Y), and third-order nonlinear susceptibility (/m[/(3)]) values are also reported for these dyes. The optical limiting values of one of the BODIPY dyes in solution, and two of the BODIPY-embedded PBC films, were below the maximum threshold of 0.95 J-cm-2. The effect of addition of substituents on the electronic structure of the BODIPY dyes was investigated using TD-DFT calculations. The calculated trends closely followed those determined experimentally.
- Full Text:
Characterisation of surfaces modified with phthalocyanines through click chemistry for applications in electrochemical sensing
- Authors: O'Donoghue, Charles St John Nqwabuko
- Date: 2018
- Subjects: Electrodes, Carbon , Phthalocyanines , X-ray photoelectron spectroscopy , Electrochemistry , Electrochemical sensors , Hydrazine , Click chemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/58046 , vital:27038
- Description: One form of surface modification was primarily investigated in this work on glassy carbon electrodes. The form of modification is comprised of a series of steps in which electrografting is first applied to the glassy carbon surface, which is then followed up with click chemistry to ultimately immobilise a phthalocyanine onto the surface. The modified glassy carbon electrodes and surfaces were characterised with a combination of scanning electrochemical microscopy, X-ray photoelectron spectroscopy and various electrochemical methods. In this work, three alkyne substituted phthalocyanines were used. Two novel phthalocyanines, with nickel and cobalt metal centres, were studied alongside a manganese phthalocyanine reported in literature. Each of the three phthalocyanines was modified at the peripheral position with a 1-hexyne group, via a glycosidic bond, yielding the terminal alkyne groups that were used for subsequent click reactions. In situ diazotisation was used to graft 4-azidoaniline groups to the surface of the glassy carbon electrode. The azide bearing 4- azidoaniline groups were thus used to anchor the tetra substituted phthalocyanines to the surface of the electrodes. This method yielded successful modification of the electrodes and lead to their application in sensing studies. The modified electrodes were primarily used to catalyse the common agricultural oxidising agent hydrazine.
- Full Text:
Photosensitizer, pH sensing and optical limiting properties of BODIPY dyes
- Authors: May, Aviwe Khanya
- Date: 2018
- Subjects: Dyes and dyeing -- Chemistry , Halogenation , Photochemotherapy , Bromination , Photosensitizing compounds , Nonlinear optics , BODIPY dyes
- Language: English
- Type: text , Thesis , Masters , MA
- Identifier: http://hdl.handle.net/10962/63964 , vital:28515
- Description: A series of BODIPY dyes have been successfully synthesised and structurally characterised to examine the effect of halogenation at the 2,6-positions and the introduction of styryl and vinylene groups at the 3,5-positions. The photophysical properties were studied, to assess the effect of the enhancement of the rate of intersystem crossing through halogenation on the fluorescence properties and the generation of reactive oxygen species. This is important in the assessment of the suitability of applying these molecules as photosensitizer dyes for photodynamic therapy and photodynamic antimicrobial chemotherapy. Upon bromination, the dyes showed moderately high singlet oxygen quantum yields. The inclusion of BODIPY dyes into cyclodextrins was explored since it makes them water soluble and hence suitable for biomedical applications, but no singlet oxygen was detected in aqueous media for the inclusion complexes. In order to red-shift the main spectral band of the BODIPY dyes into the therapeutic window, styryl groups were introduced at the 3,5-positions via a modified Knoevenagel condensation reaction. Since the main spectral band lies well above 532 nm, the second harmonic of the Nd:YAG laser, there is relatively weak absorbance at this wavelength. The 3,5-distyryl and 3,5-divinylene BODIPY dyes were assessed for their potential utility for application in nonlinear optics (NLO), and they demonstrated typical nonlinear absorption behaviour characterised by reverse saturable absorption (RSA) in z-scan measurements. Furthermore, the dyes possess excellent optical limiting parameters, such as their third-order suspectibility and hyperpolarizability values, in a wide range of solvents. One dye containing dimethylamino moieties on styryl groups attached at the 3,5-positions was assessed for potential application as an on/off fluorescence sensor. The dye proved to be successful, since intramolecular charge transfer in the S1 state was eliminated in the presence of acid and this results in a fluorescence “turn on” effect. This process was found to be reversible with the addition of a base.
- Full Text:
Nonlinear optical behavior of lanthanide phthalocyanines and their conjugates with a selection of nanomaterials
- Authors: Sekhosana, Kutloano Edward
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/4580 , vital:20695
- Description: This thesis presents novel asymmetrical and symmetrical lanthanide phthalocyanines (Pcs) characterized using a number techniques including proton nuclear magnetic resonance, electron spin resonance, time correlated single photon counting, FTIR spectrometry, MALDI-TOF mass spectrometry, UV-Vis spectrometry, Raman spectroscopy and CHNS elemental analysis. The design of theses lanthanide Pcs takes the form of mononuclear, binuclear, trinuclear, bis- and tris(phthalocyanines). Nanomaterials such as zinc oxide nanoparticles (ZnO NPs), multi-walled carbon nanotubes (MWCNTs) and graphene oxide nanosheets (GONS) (oxidized and reduced) were employed for covalent linkage to mono- and binuclear phthalocyanines as conjugates. Transmission electron microscopy was used to characterize ZnO NPs, MWCNTs and GONS alone and when linked to lanthanide Pcs. Lanthanide Pcs alone and when linked to ZnO NPs, MWCNTs and GONS where embedded in polymers such as poly (methyl methacrylate) (PMMA), poly (bisphenol A carbonate) (PBC) and poly (acrylic acid) (PAA) for thin film preparation. The thickness of the thin films was determined by utilization of the knife edge attachment of the A Bruker D8 Discover X-ray diffraction (XRD). Optical limiting properties of lanthanide Pcs alone and as conjugates in solution and when incorporated into polymers were determined by employing a Z-scan technique. It emerged that low symmetry lanthanide Pcs (19, 20 and 21), the blue forms of bis(phthalocyanines) (only in solution; 24 and 28) as well as tris(phthalocyanines) (30 and 31) exhibit low limiting threshold (Ilim) values in solution and thin films (particularly PBC and PAA). The low limiting threshold values make these lanthanide Pcs reliable optical limiters.
- Full Text:
Nonlinear optical responses of phthalocyanines in the presence of nanomaterials or when embedded in polymeric materials
- Authors: Bankole, Owolabi Mutolib
- Date: 2017
- Subjects: Phthalocyanines , Phthalocyanines -- Optical properties , Alkynes , Triazoles , Nonlinear optics , Photochemistry , Complex compounds , Amines , Mercaptopyridine
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/45794 , vital:25548
- Description: This work describes the synthesis, photophysical and nonlinear optical characterizations of alkynyl Pcs (1, 2, 3, 8 and 9), 1,2,3-triazole ZnPc (4), mercaptopyridine Pcs (5, 6 and 7) and amino Pcs (10 and 11). Complexes 1, 2, 4, 7, 8, 9 and 11 were newly synthesized and characterized using techniques including 1H-NMR, MALDI-TOF, UV-visible spectrophotometry, FTIR and elemental analysis. The results of the characterizations were in good agreement with their molecular structures, and confirmed the purity of the new molecules. Complex 10 was covalently linked to pristine graphene (GQDs), nitrogen- doped (NGQDs), and sulfur-nitrogen co-doped (SNGQDs) graphene quantum dots; gold nanoparticles (AuNPs); poly(acrylic acid) (PAA); Fe3O4@Ag core-shell and Fe3O4- Ag hybrid nanoparticles via covalent bonding. Complex 11 was linked to Agx Auy alloy nanoparticles via NH2-Au and/or Au-S bonding, 2 and 3 were linked to gold nanoparticles (AuNPs) via clicked reactions. Evidence of successful conjugation of 2, 3, 10 and 11 to nanomaterials was revealed within the UV-vis, EDS, TEM, XRD and XPS spectra. Optical limiting (OL) responses of the samples were evaluated using open aperture Z-scan technique at 532 nm and 10 ns radiation in solution or when embedded in polymer mixtures. The analyses of the Z-scan data for the studied samples did fit to a two-photon absorption mechanism (2PA), but the Pcs and Pc-nanomaterial or polymer composites also possess the multi-photon absorption mechanisms aided by the triplet-triplet population to have reverse saturable absorption (RSA) occur. Phthalocyanines doped in polymer matrices showed larger nonlinear absorption coefficients (ßeff), third-order susceptibility (Im [x(3)]) and second-order hyperpolarizability (y), with an accompanying low intensity threshold (Ium) than in solution. Aggregation in DMSO negatively affected NLO behaviour of Pcs (8 as a case study) at low laser power, and improved at relatively higher laser power. Heavy atom-substituted Pcs (6) enhanced NLO and OL properties than lighter atoms such as 5 and 7. Direct relationship between enhanced photophysical properties and nonlinear effects favoured by excited triplet absorption of the 2, 3, 10 and 11 in presence of nanomaterials was established. Major factor responsible for the enhanced nonlinearities of 10 in the presence of NGQDs and SNGQDs were fully described and attributed to the surface defects caused by the presence of heteroatoms such as nitrogen and sulfur. The studies showed that phthalocyanines-nanomaterial composites were useful in applications such as optical switching, pulse compressor and laser pulse narrowing.
- Full Text:
Photophysical studies of conjugates of upconversion nanoparticles with aluminium phthalocyanines
- Authors: Watkins, Zane
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/4964 , vital:20747
- Description: NaYF4 :Yb/Er/Gd upconversion nanoparticles (UCNP) were synthesised and their photoemission stabilised by embedding these nanoparticles in electrospun fibres. The photophysical behaviour of chloro aluminium tetrasulfo-phthalocyanine chloride (ClAlTSPc) was studied in the presence of UCNPs on mixing the two species in solution. The fluorescence lifetimes for UCNPs were shortened at 658 nm in the presence of ClAlTSPc when the former was embedded in fibre and suspended in a dimethyl sulfoxide solution of the latter. A clear singlet oxygen generation by ClAlTSPc through Forster resonance energy transfer (FRET) was demonstrated using a singlet oxygen quencher, 1,3-diphenylisobenzofuran. UCNP capped with amino groups were then covalently attached to chloro aluminium tetrasulphonated phthalocyanine (ClAlTSPc) and chloro aluminium tetracarboxy phthalocyanine (ClAlTCPc). The conjugates were characterized using different techniques such as infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS) and Transmission electron microscopy (TEM). There was a decrease in fluorescence emission spectra of the UCNPs at 658 nm in the presence of the phthalocyanines. This decrease indicates an energy transfer between the donor UCNP and conjugated accepting phthalocyanine (Pc), due to FRET. Low FRET efficiencies of 18 and 21 % for ClAlTSPc and ClAlTCPc, respectively, were obtained.
- Full Text:
Synthesis and photophysical studies of crown ether-bodipy dyes and the fabrication of bodipy embedded fluorescent nanofibers
- Authors: Stone, Justin
- Date: 2017
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/4953 , vital:20746
- Description: This study has three major objectives: 1) to synthesize a series of structurally related BODIPY dyes, 2) to fabricate BODIPY embedded electrospun nanofibers, and 3) to investigate and characterize the photophysical properties of all synthesized BODIPY dyes with a special focus on their ability to generate singlet oxygen. This thesis first explores the acid catalysed condensation reaction to produce two structurally analogous meso-substituted BODIPY dyes based on cuminaldehyde and 4-dimethylaminobenzaldehdye. In order to enhance the rate of ISC and promote the generation of reactive oxygen species bromine atoms were then attached to the BODIPY 2,6-positions. These BODIPY dyes were then embedded in a polystyrene solution and electrospun into nanofibers. The resulting nanofibers were found to be highly fluorescent, but were no longer able to generate singlet oxygen. Ion-sensitive BODIPYs were prepared from the dibrominated BODIPY dyes by employing a modified Knoevenagel condensation reaction to form a styryl bond with 4’-formylbenzo-15-crown-5 at the 3,5-position of the BODIPY core. Changes in the morphology and position of the absorption and emission spectra of these crown ether-styryl BODIPY dyes were observed in the presence of sodium ions. These results imply that crown ether-substituted BODIPY dyes could function as ion sensors.
- Full Text:
Synthesis and physicochemical evaluation of a series of boron dipyrromethene dye derivatives for potential utility in antimicrobial photodynamic therapy and nonlinear optics
- Authors: Kubheka, Gugu Patience
- Date: 2017
- Subjects: Dyes and dyeing -- Chemistry , Photochemotherapy , Cancer -- Photochemotherapy , Anti-infective agents , Nonlinear optics , BODIPY
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/4776 , vital:20723
- Description: A series of new BODIPY dye derivatives have been synthesized and characterized using various characterization tools such as 1H-NMR, MALDI-TOF mass spectrometry, FT-IR, UV-visible spectrophotometry and elemental analysis. The aniline-substituted BODIPY derivative was further coordinated with gold nanorods and the characterization was achieved by transmission electron microscopy (TEM), X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS).In addition to this dye, quaternized BODIPY dyes were also synthesized and investigated for their potential utility as photosentitizers in antimicrobial photodynamic therapy (APDT).BODIPY dyes with pyrene substituted styryl groups were embedded in polymer thin film using poly(bisphenol A carbonate) (PBC) to study their optical limiting properties. The optical limiting values of these BODIPY dyes once embedded in thin films were found to be greatly improved and the limiting intensityof each film was well below the maximum threshold which is set to be 0.95 J.cm-². The physicochemical properties and NLO parameters of all of the synthesized dyes were investigated.
- Full Text:
Synthesis of indium and lead phthalocyanine as photocatalysts for photodynamic antimicrobial chemotherapy and photo-oxidation of pollutants
- Authors: Oluwole, Oluyinka David
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/5293 , vital:20805
- Full Text:
Synthesis of indium and lead phthalocyanine as photocatalysts for photodynamic antimicrobial chemotherapy and photo-oxidation of pollutants
- Authors: Osifeko, Olawale L
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/5221 , vital:20790
- Description: This thesis explores the synthesis of metallophthalocyanines as potential photosensitizers for application in photodynamic antimicrobial chemotherapy and phototransformation of environmental pollutants. The metallophthalocyanines containing amino substituent were conjugated with magnetic nanoparticle and semiconductor quantum dots via an amide bond and by chemisorption onto gold nanoparticles surface. Techniques such as time-resolved fluorescence measurements, transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), elemental analysis, fourier transform infrared (FTIR), nuclear magnetic resonance (¹H, ¹³C, and cozy of symmetrical phthalocyanine), electronic spectroscopy, as well as mass spectroscopy were employed to characterize all metallophthalocyanines. Quarternized pyridyloxy substituted phthalocyanine and asymmetric (AB3) metallophthalocyanines were embedded in electrospun polystyrene fiber. General trends are described for quantum yields of fluorescence, triplet, singlet oxygen and photodegradation as well as lifetimes of fluorescence and triplet state of the compounds. There is an increase in triplet quantum yield for Pcs in the presence of gold nanoparticles (AuNPs) and semiconductor quantum dots (QDs), but not in the presence of magnetic nanoparticles (MNPs). Photodynamic inactivation of Escherichia coli with the quarternized photosensitizers at low concentrations totally inactivate the bacteria compared to non-charged photosensitiser. Also, a similar trend was observed for the magnetic nanoparticles conjugates. Photooxidations of bisphenol A and 4-chlorophenol were carried out in this study using two asymmetric Indium(III) phthalocyanines photosensitizers. The photooxidation reactions were compared with those of a symmetrical indium(III) phthalocyanines containing four quaternized 4-pyridyloxy substituents. The complexes were embedded in electrospun polystyrene fiber for heterogeneous photocatalysis. The immobilized photosensitizers possess good singlet oxygen generation potentials in aqueous media. The asymmetrical phthalocyanine containing 4-pyridylsulfanyl and one aminophenoxy showed the best photocatalytic behavior.
- Full Text:
The effects of graphene and other nanomaterials on the electrocatalytic behaviour of phthalocyanines
- Authors: Shumba, Munyaradzi
- Date: 2017
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/37952 , vital:24712
- Description: Carbon based nanomaterials, gold nanorods and metallophthalocyanine nanoconjugates have been developed for electrocatalysis. Carbon based nanomaterials used are multiwalled carbon nanotubes, pristine graphene oxide nanosheets, nitrogen, boron, sulphur, phosphorus doped graphene oxide nanosheets. Cobalt phthalocyanine (CoPc), cobalt tetra aminophenoxy phthalocyanine (CoTAPc), cobalt tetra aminophenoxy phthalocyanine (CoTAPhPc), cobalt mono carboxyphenoxy phthalocyanine (CoMCPhPc) and cobalt tetra carboxyphenoxy phthalocyanine (CoTCPhPc) are the phthalocyanines employed in this work. Metallophthalocyanines were employed either in their bulk form or in their nanosized form. Electrode modification by these nanomaterials was either done sequentially, premixed or linked nanoconjugates. In all sequential modification, phthalocyanines were employed on top of other nanomaterials. Sequentially modified electrodes gave higher detection currents than both premixed and covalently bonded nanoconjugates. The nanomaterials reported here were characterised by transmission electron microscopy, Raman spectroscopy, time of flight secondary ion mass spectrometry, and X-ray diffraction among other techniques. The modified electrodes were further characterised by scanning electron microscopy, scanning electrochemical microscopy, X-ray photoelectron spectroscopy and cyclic voltammetry, while square wave, linear scan and cyclic voltammetry, rotating disc electrode and chronoamperometry have been used to evaluate the electrocatalytic behaviour of the previously mentioned towards either oxidation or reduction of L-cysteine and/or hydrogen peroxide respectively. Generally, the nanoconjugates resulted in superior catalytic performance compared to the performance of individual nanomaterials. Zinc octacarboxy phthalocyanine (ZnOCPc) conjugated to either GONS or rGONS were employed to compare electrocatalytic detection of hydrogen peroxide to its luminescence sensing.
- Full Text:
Electrode surface modification using iron(II) phthalocyanine immobilized via electrografting and click chemistry and clicked onto azide-functionalized quantum dots: applications in electrocatalysis
- Authors: Nxele, Siphesihle Robin
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3464 , vital:20501
- Description: Tetrakis(5-hexynoxy)Fe(II) phthalocyanine was used alone and in combination with quantum dots (QDs) in order to test the electrocatalytic ability with hydrazine and paraquat as the analytes of interest. This novel phthalocaynine was successfully synthesised and characterized using various characterisation techniques. The QDs used were the well-known core-shell CdSe/ZnS nanostructures. The fabrication of glassy carbon electrodes involved covalent attachment by electrochemical grafting and click chemistry for the first part of the work and the second part involved the conjugation of the synthesised QDs and the phthalocyanine by click chemistry. This approach of conjugating these nanostructures introduced another aspect of novelty to the work reported in this thesis. The immobilisation of this conjugate on a glassy carbon electrode (GCE) was achieved by adsorption. Characterisation techniques such as infrared spectroscopy, x-ray diffractometry, UV/vis spectroscopy, transmission electron microscopy and x-ray photoelectron spectroscopy were used to characterise the molecules and conjugates of interest. With respect to the electrocatalytic part of the work, electrode surface characterisation involved scanning electrochemical microscopy and cyclic voltammetry to determine changes in the nature of the surface as well as reactivity of the surface at different modification steps. Detection limits and the sensitivity determined for the electrocatalysts fabricated here proved to be an improvement compared to other reported work involving phthalocyanines and the test analytes chosen for application. With respect to the conjugate, the electrocatalytic ability was improved when the QDs and phthalocyanine were combined using click chemistry compared to using the phthalocyanine alone.
- Full Text:
Improved singlet oxygen generation by a novel bodipy dye and a study of upconverison nanoparticles mixed with a functionalized bodipy compound
- Authors: Wildervanck, Martijn Johannes
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3718 , vital:20538
- Description: This research explores the use of the versatile 4,4-difluoro-4-boro-3a,4a-diaza-s-indacene (BODIPY) dyes and the modification of their spectroscopic properties. The synthesis of a tetramethyl-BODIPY bearing a sterically hindered meso-phenyl ring with an ethynyl functional group at the para-position was compared to that of its freely rotating counterpart with no methyl substituents on the BODIPY core, with the fluorescence properties in particular proving to be markedly different. These phenyl-ethynyl-substituted BODIPYs were used as the starting materials for the synthesis of novel BODIPY dyes for sensor applications via Sonogashira coupling reactions at the ethynyl position, but this resulted instead in the serendipitous synthesis of a novel BODIPY dimer in which the para-positions of the meso-phenyl rings are linked by a diethynyl bridge. Following iodination at the 2, 6-positions, the dimer was found to have a singlet oxygen quantum yield of 0.88, compared to the value of 0.86 that was obtained for the analogous monomer. Since the εmax values for the main spectral bands of the dimers are significantly higher, the compounds may be of interest for singlet oxygen generation applications. A second study was carried out on the interaction between methyl ester functionalized BODIPY dyes and upconversion nanoparticles (UCNPs) to explore the possible use of BODIPY-UCNP conjugates in biomedical applications. The singlet oxygen generation properties of the BODIPY were tested following iodination at the 2, 6-positions, a singlet oxygen quantum yield value of 0.86 was obtained. Three sets of oleate capped UCNPs were synthesized with different diameters and were rendered water dispersible with the addition of a silica shell. The necessary scaffolding for conjugation to the BODIPY was provided by amine groups following functionalization of this shell. All of the sets of oleate capped and silica coated UCNPs were characterized by transmission electron microscopy (TEM) and X-ray diffractometry (XRD) and their emission properties were studied upon excitation at 978 nm with a diode laser with a Picoquant Fluotime 300 spectrophotometer that enables the measurement of anti-Stokes emission. The potential utility of UCNP-BODIPY conjugates for singlet oxygen applications, such as PDT, was then assessed.
- Full Text:
Nanocomposites of carbon nanomaterials and metallophthalocyanines : applications towards electrocatalysis
- Authors: Nyoni, Stephen
- Date: 2016
- Subjects: Nanocomposites (Materials) , Nanostructured materials , Electrocatalysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4561 , http://hdl.handle.net/10962/d1020846
- Description: Nanohybrid materials have been prepared and examined for their electrocatalytic activity. The nanocomposites have been prepared from carbon nanomaterials (multiwalled carbon nanotubes (MWCNTs) and graphene nanosheets), cadmium selenide quantum dots and metallophthalocyanines (MPcs). The MPcs used in this work are cobalt tetraamino-phthalocyanine (CoTAPc) and tetra (4-(4,6-diaminopyrimidin-2-ylthio) phthalocyaninatocobalt (II)) (CoPyPc). Their activity has also been explored in different forms; polymeric MPcs, iodine doped MPcs and covalently linked MPcs. The premixed drop-dry, sequential drop-dry and electropolymerisation electrode modification techniques were used to prepare nanocomposite catalysts on the glassy carbon electrode (GCE) surface. The sequential drop dry technique for MPc and MWCNTs gave better catalytic responses in terms of limit of detection, catalytic and electron transfer rate constants relative to the premixed. MWCNTs and CdSe-QDs have been used as intercalating agents to reduce restacking of graphene nanosheets during nanocomposite preparation. Voltammetry, chronoamperometry, scanning electrochemical microscopy and electrochemical impedance spectroscopy methods are used for electrochemical characterization modified GCE. X-ray photoelectron spectroscopy, X-ray diffractometry, transmission electron microscopy, scanning electron microscopy, infra-red spectroscopy, Raman spectroscopy were used to explore surface functionalities, morphology and topography of the nanocomposites. Electrocatalytic activity and possible applications of the modified electrodes were tested using oxygen reduction reaction, l-cysteine oxidation and paraquat reduction. Activity of nanocomposites was found superior over individual nanomaterials in these applications.
- Full Text:
The effect of shaped nanoparticles on the photophysicochemical behaviour of metallophthalocyanines
- Authors: D'Souza, Sarah
- Date: 2016
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/529 , vital:19967
- Description: The synthesis, spectroscopic characterization and photophysicochemical analysis of novel and known metallophthalocyanines are reported in this thesis. The novel lowsymmetry compounds were extensively studied. Selected phthalocyanines were conjugated to a variety of nanoparticles consisting of silver (AgNPs), gold (AuNPs) and zinc oxide (ZnO NPs) in order to improve their photophysical and photochemical behaviour. As with the phthalocyanines, the nanoparticles and phthalocyaninenanoparticle conjugates were thoroughly investigated. Research on the effect of the solvent used, as well as the influence of nanoparticle composition and shape on the properties of the phthalocyanines, were performed. The findings showed that there was a general increase in triplet quantum yields of the phthalocyanines in the presence of the nanoparticles. It was also noted that the use of different solvents directly affected the photophysicochemical properties. In the case of the nanoparticle conjugates, photophysical and photochemical changes were observed. Of significance were the gold nanostars, which decreased the degree of phthalocyanine aggregation in water, resulting in increased fluorescence lifetimes. The studies also revealed that the effect of the nanoparticle shape on the phthalocyanine properties was highly dependent on the nanoparticle material. The photodynamic antimicrobial activity of selected phthalocyanine-zinc oxide nanoparticle conjugates was investigated against Staphylococcus aureus (S. aureus) in solution. The phthalocyanines alone exhibited remarkable growth inhibition, however the presence of the nanoparticles in the conjugates increased the photoinactivation of S. aureus.
- Full Text:
Electrode surface modification using metallophthalocyanines and metal nanoparticles : electrocatalytic activity
- Authors: Maringa, Audacity
- Date: 2015
- Subjects: Phthalocyanines , Nanoparticles , Electrocatalysis , Scanning electron microscopy , X-ray photoelectron spectroscopy , Electrochemistry , Scanning electrochemical microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4541 , http://hdl.handle.net/10962/d1017921
- Description: Metallophthalocyanines and metal nanoparticles were successfully synthesized and applied for the electrooxidation of amitrole, nitrite and hydrazine individually or when employed together. The synthesized materials were characterized using the following techniques: predominantly scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning electrochemical microscopy (SECM). Different electrode modification methods were used to modify the glassy carbon substrates. The methods include adsorption, electrodeposition, electropolymerization and click chemistry. Modifying the glassy carbon substrate with MPc (electropolymerization) followed by metal nanoparticles (electrodeposition) or vice versa, made a hybrid modified surface that had efficient electron transfer. This was confirmed by electrochemical impedance studies with voltammetry measurements having lower detection potentials for the analytes. This work also describes for the first time the micropatterning of the glassy carbon substrate using the SECM tip. The substrate was electrografted with 4-azidobenzenediazonium salt and then the click reaction was performed using ethynylferrocene facilitated by Cu⁺ produced at the SECM tip. The SECM imaging was then used to show the clicked spot.
- Full Text:
Metallophthalocyanine-gold nanoparticle conjugates for photodynamic antimicrobial chemotherapy
- Authors: Mthethwa, Thandekile Phakamisiwe
- Date: 2015
- Subjects: Nanochemistry , Phthalocyanines , Photochemistry
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4543 , http://hdl.handle.net/10962/d1017923
- Description: This thesis presents the synthesis of neutral and cationic metallophthalocyanines and their gold nanoparticles conjugates. The spectroscopic characterization of these compounds is presented herein. The studies presented in this work shows that the conjugation of gold nanoparticles influenced both photophysical and photochemical properties. Gold nanoparticles were found to enhance the singlet oxygen quantum yield while lowering the fluorescence quantum yields. This work also looks at the effect of anisotropic gold nanoparticles such as nanorods and bipyramids on the photophysical behaviour of the metallophthalocyanines. The effect of the size of the gold nanorods was investigated herein. The results show that photophysical and photochemical properties can be influenced by both size and shape of the nanoparticles. Physical characterization about the loading of nanoparticles was also looked into. Parameters such as the surface area, the number of surface atoms, the number of atoms as well as the number of nanoparticles loaded on the surface of the phthalocyanines were studied. The self-assembled monolayers formed by phthalocyanines on gold surfaces were studied using the X-ray photoelectron spectroscopy (XPS). The gold nanoparticles synthesized herein include both organic and water soluble, different capping agents (citrate, tetraammonium bromide (TAOBr) and cetrimethylammonium bromide (CTAB). The concentration of the gold nanoparticles was measured on the inductively coupled plasma (ICP) and their size and shape were obtained from the transmission electron microscopy (TEM) images. A cationic aluminium phthalocyanine and its conjugates were used for photoinactivation of bacteria and fungi. The results show significant reduction and higher activity in the presence of gold nanoparticles, especially nanorods. A small chapter in this work presents an attempted work on the binding of metallothionein protein with protophorphyrin (IX). The pH and concentration dependent binding studies were investigated
- Full Text:
Nonlinear optical studies of phthalocyanines and their conjugates with nanomaterials
- Authors: Sanusi, Sikiru Olukayode
- Date: 2015
- Subjects: Phthalocyanines , Nonlinear optics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4545 , http://hdl.handle.net/10962/d1017925
- Description: A number of metallophthalocyanines (MPcs) and metal-free phthalocyanines (H₂Pcs) have been synthesized and characterized using various characterization tools such as ¹H-NMR, TOF mass spectrometry, FT-IR, UV-visible spectrophotometry and CHNS elemental analysis. Some of the MPcs were covalently linked to nanomaterials such as silica nanoparticles (SiNPs), single-walled carbon nanotubes (SWCNTs), magnetite nanoparticles (MNPs) and quantum dots (QDs), or embedded in polymer thin-films using poly(methyl methacrylate) (PMMA) and poly(acrylic acid) (PAA) as the polymer sources. The phthalocyanine-nanomaterial composites (Pc-NMCs) were characterized with FT-IR, UV-visible spectrophotometry, transmission electron microscopy (TEM), thermogravimetry analysis and X-ray diffractometry. The nonlinear optical (NLO) properties (using the open-aperture Z-scan technique) of the MPcs and the Pc-NMCs were investigated. In general, most of the investigated MPcs showed good optical limiting behaviors, except for a few, like the non-peripherally-substituted 2-pyridyloxy phthalocyanines, which showed inhibited NLO response as a result of the ring-strain effects. The absence of a metal center was found to greatly reduce the inherent high nonlinearities expected of some of the phthalocyanine complexes. The octaphenoxy derivatives (61a – 61e) were found to exhibit reverse saturable absorption (RSA) that depends on the singlet-singlet transitions, hence making them less reliable optical limiters. The optical limiting properties of the MPcs were improved in the presence of nanomaterials such as the QDs, MNPs and SWCNTs, with MPc-QDs showing the best optical limiting behavior of the three. SiNPs have no significant effect on the optical limiting behavior of the MPcs. The optical limiting properties of the MPcs were greatly enhanced in the presence of PMMA or PAA polymers. The PAA polymer showed better optical limiting behavior compared to PMMA
- Full Text: