Inhibition of aluminium corrosion using phthalocyanines: Experimental and computational studies
- Authors: Nnaji, Nnaemeka Joshua
- Date: 2022-04-08
- Subjects: Aluminum Corrosion , Electrochemistry , Phthalocyanines , Corrosion and anti-corrosives , Protective coatings , Density functionals
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/294643 , vital:57240 , DOI 10.21504/10962/294643
- Description: Metal deterioration over time is a process known as corrosion, an electrochemical process, which can occur by surface chemical actions on metals by its environment. Metal corrosion have great economic, security, and environmental consequences, and its control is a major research area in corrosion science. Amongst the different corrosion protecting approaches, the use of corrosion inhibitors and protective coatings have attracted enormous research interest in this area of scholasticism. This has necessitated the computational and electrochemical investigations of aluminium corrosion inhibitive potentials of some compounds in 1M HCl. Metal free (5_H2), ClGa(III) (5_Ga) and Co(II) (5_Co) tetrakis(4-acetamidophenoxy)phthalocyanines as well as Co(II) 2,9,16-tris(4-(tert-butyl)phenoxy)-23-(pyridin-4-yloxy)phthalocyanine (6) and Co(II) 2,9,16,24-tetrakis(4-(tert-butyl)phenoxy)phthalocyanine (7) were synthesized for the first time and studied for corrosion inhibition. The reported ClGa(III) tetrakis(benzo[d]thiazol-2-yl-thio)phthalocyaninine (1), ClGa(III) tetrakis(benzo[d]thiazol-2ylphenoxy)phthalocyanine (2), ClGa(III) tetrakis-4-(hexadecane-1,2-dioxyl)-bis(phthalocyanine) (3) and ClGa(III) tetrakis-4,4′-((4-(benzo[d]thiazol-2-yl)-1,2-bis(phenoxy)-bis(phthalocyanine) (4) were also employed for corrosion inhibition of Al in HCl. Corrosion inhibition measurements using electrochemical techniques showed that increased π conjugation caused (1) to (2) to outperform (1a) and (2a) respectively as aluminium corrosion inhibitors in 1.0 M hydrochloric acid. For similar reason, (4) outperformed 2. (1) and (2) were successfully electrodeposited onto aluminium for corrosion retardation in 1.0 M hydrochloric acid solution. Measurements obtained from electrochemical impedance spectroscopy gave corrosion inhibition efficiency values of 82% for 1 and 86% for 2 in 1.0 M hydrochloric acid solution and showed that electrodeposited phthalocyanines have enhanced aluminium corrosion retardation than when in solution. The use of reduced graphene oxide nanosheets (rGONS) alone as aluminium corrosion inhibitor is discouraged because of poor aluminium corrosion inhibition in 1M HCl. However, synergistic effects were observed when rGONS was mixed each with (4) and (3). (5_H2), (5_Ga) and (5_Co) decreased aluminium corrosion in 1M HCl and observation was that the heavier the atom the more decreased the protection and the free base performed best of the three. Studied tertbutylphenoxy-derived CoPcs (6 and 7) exhibited good aluminium corrosion inhibition properties in studied acidic solution and the unsymmetric CoPc (6) which has more heteroatoms, gave better performance. Quantum chemical calculations involved the use of density functional theoretical (DFT) approaches and gave results which corroborated with experimental findings. , Thesis (PhD) -- Faculty of Science, Chemistry, 2022
- Full Text:
Singlet oxygen and optical limiting applications of BODIPYs and other molecular dyes
- Authors: May, Aviwe Khanya
- Date: 2022-04-08
- Subjects: Dyes and dyeing Chemistry , Phthalocyanines , Photochemotherapy , Active oxygen , Nonlinear optics , Time-dependent density functional theory , Photochemistry
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/294618 , vital:57238 , DOI 10.21504/10962/294620
- Description: A series of structurally diverse novel and previously synthesized BODIPY core dyes are synthesized and characterized in this thesis. These BODIPYs were synthesized using 2-methylpyrrole, 2-ethylpyrrole, 2,4-dimethylpyrrole and 3-ethyl-2,4-dimethylpyrrole as the starting pyrroles. The combination of different pyrroles with the same aldehyde results in BODIPY core dyes that are structural analogues. These core dyes were used as precursors to synthesise halogenated BODIPYs and novel styrylBODIPY dyes, which were successfully characterized using FT-IR and 1H NMR spectroscopy. The halogenated BODIPY core dyes and the styrylBODIPY dyes were also characterized using MALDI-TOF mass spectrometry. The introduction of heavy atoms on the BODIPY core leads to a red shift of the main spectral. In the presence of styryl groups, the main spectral band red shifts to the far red end of the visible region. As expected, the halogenated BODIPY core dyes also had moderate singlet oxygen quantum yields. These halogenated core dyes were found to be suitable as photosensitizers as all the dyes reduced bacterial viability to below 50% during photodynamic antimicrobial chemotherapy (PACT) studies against Staphylococcus aureus. The structure-property relationships studied demonstrate that the presence of protons rather than methyls at the 1,7-positions or iodines at the 2,6-positions results in more favorable PACT activity. This is likely to be related to the greater ability of the meso-aryl to rotate into the plane of the dipyrromethene ligand and suggests that there should be a stronger focus on dyes of this type in future studies in this field. During nonlinear optical (NLO) studies, all the styrylBODIPYs exhibited favorable reverse saturable absorption (RSA) responses. In the absence of methyl groups at the 1,7-positions, the meso-aryl ring lies closer to the π-system of the BODIPY core, enhancing donor (D)–π–acceptor (A) properties and resulting in slightly enhanced optical limiting (OL) parameters. Additionally, there is no evidence that the introduction of heavy atoms at the 2,6-positions significantly enhances OL properties. In a similar manner, alkyl substituents at these positions also do not significantly enhance OL properties; this was studied for the first time using 15 with ethyl groups at the 2,6-positions. The combination of z-scan data and transient spectroscopy for 16 demonstrated that the main mechanism responsible for the NLO properties of nonhalogenated BODIPY dyes is one-photon absorption from the ground state followed by ESA in the singlet manifold. From the NLO studies of 25, OL parameters of 1,3,5-tristyrylBODIPY dyes were found to be similar in magnitude to properties of distyrylBODIPY dyes, but to have less favorable optical properties for OL applications. The OL properties of scandium phthalocyanines were assessed for the first time, since the Sc(III) ion, unusually for a first row transition metal ion, is known to readily form sandwich complexes. The presence of a Sc(III) ion does not significantly enhance the OL properties of phthalocyanines relative to those of rare earth metal ions that also form complexes of this type. Because BODIPYs and phthalocyanines typically absorb significantly in the visible region, transparent PBC polymer thin films of disilane-bridged compounds with minimal absorption in this region were studied and exhibited an excellent RSA response. These compounds may be useful in the design of OL materials that can protect the human eye. The optimized geometries and spectroscopic properties of selected BODIPYs were studied. As expected, the presence of bromine, iodine, ethyl and styryl groups at different positions of the BODIPY core leads to a narrowing of the HOMO–LUMO band gap, which results in a red-shift of the main spectral band. Partial atomic charges have also been calculated for some of the styrylBODIPY dyes studied for application in OL, and electrostatic potential energy maps were also visualized to better assess how the dipole moment of BODIPY dyes can be modulated since this can affect the OL properties. For all the BODIPYs studied, the electronegativity of the atoms present influences charge distribution on the BODIPY structure. , Thesis (PhD) -- Faculty of Science, Chemistry, 2022
- Full Text:
The systematic assembly of prostate specific antigen electrochemical sensors based on asymmetric Co(II) phthalocyanines, graphitic quantum dots and an aptamer
- Authors: Nxele, Siphesihle Robin
- Date: 2022-04-08
- Subjects: Prostate-specific antigen , Electrochemical sensors , Phthalocyanines , Quantum dots , Co(II) phthalocyanines , Aptamer
- Language: English
- Type: Doctoral thesis , text
- Identifier: http://hdl.handle.net/10962/232893 , vital:50035 , DOI 10.21504/10962/232893
- Description: The need for low-cost, efficient and simple diagnostic tools has led to more research going into this subject, with the aim of making such medical devices more accessible where they are needed. This has led to more researchers developing point-of-care devices for this purpose worldwide, by sensor fabrication. This thesis focuses on electrochemical sensor development for the early diagnosis of prostate cancer. It is common knowledge that prostate cancer is one of the most prevalent carcinomas that have claimed lives due to late diagnosis where even the most invasive treatments have failed. For this reason, development of early detection devices that can even be used in the comfort of home is necessary and quite crucial. Electrochemical sensors have gained much attention due to their ease of fabrication, cost effectiveness, simplicity, ease of use and high efficiency. Using nanocomposites as modifiers has also become popular as they provide greater stability and improve detection limits when used together with biomolecules. With that said, the work reported herein has combined nanocomposites of graphenebased quantum dots, gold nanoparticles, phthalocyanines and an aptamer in order to fabricate aptasensors for the electrochemical detection of prostate cancer biomarker. The aptamer is specifically designed to bind to the biomarker, and the nanocomposites are expected to enhance current output thus lowering detection limits and increasing stability and efficiency. Reproducible results are also expected. Prior to the detection of the prostate cancer biomarker, the quantum dots-phthalocyanine nanohybrids were used to detect L-cysteine, which is an amino acid, in order to verify the synergistic effects as electrode modifiers that lead to the enhancement of current output. This increase in current output is then v exploited for the improvement of aptasensor functionality upon incorporation of the aptamer, for the detection of prostate specific antigen. The research in this thesis has been carried out with the intention of contributing to the world of medical research, more so because of the ever-increasing need for medical care to become accessible to all and not only to those who can afford expensive technologies and treatments. , Thesis (PhD) -- Faculty of Science, Chemistry, 2022
- Full Text: