Evaluation of metallophthalocyanine functionalized photocatalytic asymmetric polymer membranes for pollution control and antimicrobial activity
- Mafukidze, Donovan Musizvinoda Chidyamurimi
- Authors: Mafukidze, Donovan Musizvinoda Chidyamurimi
- Date: 2021
- Subjects: Photosensitizing compounds , Water -- Purification -- Photocatalysis , Phthalocyanines , Polymeric membranes , Porphyrins
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/171357 , vital:42052 , 10.21504/10962/171357
- Description: The conceptualisation of photosensitizing water treatment polymer membranes using phthalocyanine based photosensitizers is reported in this thesis. The key to successful preparation of stable photoactive polymer membranes was established as the covalent anchorage of the photosensitizer to a polymer, which was proven by singlet oxygen generation by the membranes without photosensitizer deterioration. Despite this limitation, the covalent linkage-incapable unsubstituted zinc (II) phthalocyanine (complex 2) was applied as a nanoconjugate of graphene quantum dots (2π(GQDs)). 2π(GQDs) was formed through π-π stacking, and was then covalently anchored, as a proof of concept. This concept was also applied to 2-(4-carboxyphenoxy) phthalocyaninato zinc (II) (complex 3) which is capable of covalent linkage but proved to deteriorate the efficiency of singlet oxygen formation with comparison to the covalent conjugates. Singlet oxygen generation by functionalized polymer membranes rendered them photocatalytic in the degradation of organic pollutants and microorganisms in water. Organic pollutant degradation capability was exemplified by 2π(GQDs) and a porphyrin-phthalocyanine heterodyad (complex 10) functionalized membranes (2π(GQDs)-memb and 10-memb respectively), where a MPc loading of approximately 0.139 μmol MPc/g of membrane was able to achieve a 4-chlorophenol degradation rate of 3.77 × 10−6 mol L−1 min−1 in a second order reaction with an initial 4-chlorophenol concentration of 3.24 × 10−4 mol L−1 for 2π(GQDs)-memb as an example. Antibacterial studies against S.aureus using a quaternized MPc and conjugates of silver triangular nanoprisms with zinc (II) and indium (III) MPcs showed note-worthy improvements in photodynamic antimicrobial chemotherapy (PACT) activity in comparison to the unquaternized MPc precursor, and the free zinc and indium MPcs respectively. Functionalization of polymer membranes with these higher activity photosensitizers translated to the formation of potentially superior biological fouling resistant membranes. The use of porphyrin-phthalocyanine polynuclei arrays (complex 10) in polymer membrane functionalization resulted in the use of a wider wavelength range (white light). The findings from this work as a whole, thus presents the potential applicability of phthalocyanine functionalized polymer membranes in water treatment technology.
- Full Text:
- Authors: Mafukidze, Donovan Musizvinoda Chidyamurimi
- Date: 2021
- Subjects: Photosensitizing compounds , Water -- Purification -- Photocatalysis , Phthalocyanines , Polymeric membranes , Porphyrins
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/171357 , vital:42052 , 10.21504/10962/171357
- Description: The conceptualisation of photosensitizing water treatment polymer membranes using phthalocyanine based photosensitizers is reported in this thesis. The key to successful preparation of stable photoactive polymer membranes was established as the covalent anchorage of the photosensitizer to a polymer, which was proven by singlet oxygen generation by the membranes without photosensitizer deterioration. Despite this limitation, the covalent linkage-incapable unsubstituted zinc (II) phthalocyanine (complex 2) was applied as a nanoconjugate of graphene quantum dots (2π(GQDs)). 2π(GQDs) was formed through π-π stacking, and was then covalently anchored, as a proof of concept. This concept was also applied to 2-(4-carboxyphenoxy) phthalocyaninato zinc (II) (complex 3) which is capable of covalent linkage but proved to deteriorate the efficiency of singlet oxygen formation with comparison to the covalent conjugates. Singlet oxygen generation by functionalized polymer membranes rendered them photocatalytic in the degradation of organic pollutants and microorganisms in water. Organic pollutant degradation capability was exemplified by 2π(GQDs) and a porphyrin-phthalocyanine heterodyad (complex 10) functionalized membranes (2π(GQDs)-memb and 10-memb respectively), where a MPc loading of approximately 0.139 μmol MPc/g of membrane was able to achieve a 4-chlorophenol degradation rate of 3.77 × 10−6 mol L−1 min−1 in a second order reaction with an initial 4-chlorophenol concentration of 3.24 × 10−4 mol L−1 for 2π(GQDs)-memb as an example. Antibacterial studies against S.aureus using a quaternized MPc and conjugates of silver triangular nanoprisms with zinc (II) and indium (III) MPcs showed note-worthy improvements in photodynamic antimicrobial chemotherapy (PACT) activity in comparison to the unquaternized MPc precursor, and the free zinc and indium MPcs respectively. Functionalization of polymer membranes with these higher activity photosensitizers translated to the formation of potentially superior biological fouling resistant membranes. The use of porphyrin-phthalocyanine polynuclei arrays (complex 10) in polymer membrane functionalization resulted in the use of a wider wavelength range (white light). The findings from this work as a whole, thus presents the potential applicability of phthalocyanine functionalized polymer membranes in water treatment technology.
- Full Text:
The electrocatalytic response of metallophthalocyanines when clicked to electrodes and to nanomaterials
- Authors: Mpeta, Lekhetho Simon
- Date: 2021
- Subjects: Phthalocyanines , Nanostructured materials , Electrocatalysis , Nanoparticles , Environmental chemistry , Electrodes , Organic wastes -- Purification
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/172191 , vital:42174 , 10.21504/10962/172191
- Description: Conjugates of nanomaterials and metallophthalocyanines (MPcs) have been prepared and their electrocatalytic activity studied. The prepared nanomaterials are zinc oxide and silver nanoparticles, reduced graphene oxide nanosheets and semiconductor quantum dots. The MPcs used in this work are cobalt (II) (1a), manganese(III) (1b) and iron (II) (1c) 2,9(10),16(17),23(24)- tetrakis 4-((4-ethynylbenzyl) oxy) phthalocyaninato, 2,9(10),16(17),23(24)- tetrakis(5-pentyn-oxy) cobalt (II) phthalocyaninato (2), 9(10),16(17),23(24)- tris-[4-tert-butylphenoxy)-2- (4-ethylbezyl-oxy) cobalt (II) phthalocyaninato (3), 9(10),16(17),23(24)- tris-[4-tertbutylphenoxy)-2-(pent-4yn-yloxy)] cobalt (II) phthalocyaninato (4), cobalt (II) (5a) and manganese (III) (5b) 2,9(10),16(17),23(24)- tetrakis [4-(4-(5-chloro-1H-benzo [d]imidazol-2-yl)phenoxy] phthalocyaninato and 9(10),16(17),23(24)- tris tert butyl phenoxy- 2- [4-(4-(5-chloro-1H-benzo[d]imidazole-2-yl)phenoxy] cobalt (II) phthalocyaninato (6). Some of these MPcs (1a, 3 and 4) were directly clicked on azide grafted electrode, while some (1b, 1c, 2, 5a and 5b) were clicked to azide functionalised nanomaterials and then drop-dried on the electrodes. One phthalocyanine (5b) was drop-dried on the electrode then silver nanoparticles were electrodeposited on it taking advantage of metal-N bond. Scanning electrochemical microscopy, voltammetry, chronoamperometry, electrochemical impedance spectroscopy are among electrochemical methods used to characterise modified electrodes. Transmission electron microscopy, X-ray photoelectron spectroscopy, Xray diffractometry, Raman spectroscopy and infrared spectroscopy were employed to study surface functionalities, morphology and topography of the nanomaterials and complexes. Electrocatalytic activity of the developed materials were studied towards oxidation of 2-mercaptoethanol, hydrazine and hydrogen peroxide while the reduction study was based on oxygen and hydrogen peroxide. In general, the conjugates displayed superior catalytic activity when compared to individual materials. Complex 2 alone and when conjugated to zinc oxide nanoparticles were studied for their nonlinear optical behaviour. And the same materials were explored for their hydrazine detection capability. The aim of this study was to develop sensitive, selective and affordable sensors for selected organic waste pollutants. Conjugates were found to achieve the aim of the study compared to when individual materials were employed.
- Full Text:
- Authors: Mpeta, Lekhetho Simon
- Date: 2021
- Subjects: Phthalocyanines , Nanostructured materials , Electrocatalysis , Nanoparticles , Environmental chemistry , Electrodes , Organic wastes -- Purification
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/172191 , vital:42174 , 10.21504/10962/172191
- Description: Conjugates of nanomaterials and metallophthalocyanines (MPcs) have been prepared and their electrocatalytic activity studied. The prepared nanomaterials are zinc oxide and silver nanoparticles, reduced graphene oxide nanosheets and semiconductor quantum dots. The MPcs used in this work are cobalt (II) (1a), manganese(III) (1b) and iron (II) (1c) 2,9(10),16(17),23(24)- tetrakis 4-((4-ethynylbenzyl) oxy) phthalocyaninato, 2,9(10),16(17),23(24)- tetrakis(5-pentyn-oxy) cobalt (II) phthalocyaninato (2), 9(10),16(17),23(24)- tris-[4-tert-butylphenoxy)-2- (4-ethylbezyl-oxy) cobalt (II) phthalocyaninato (3), 9(10),16(17),23(24)- tris-[4-tertbutylphenoxy)-2-(pent-4yn-yloxy)] cobalt (II) phthalocyaninato (4), cobalt (II) (5a) and manganese (III) (5b) 2,9(10),16(17),23(24)- tetrakis [4-(4-(5-chloro-1H-benzo [d]imidazol-2-yl)phenoxy] phthalocyaninato and 9(10),16(17),23(24)- tris tert butyl phenoxy- 2- [4-(4-(5-chloro-1H-benzo[d]imidazole-2-yl)phenoxy] cobalt (II) phthalocyaninato (6). Some of these MPcs (1a, 3 and 4) were directly clicked on azide grafted electrode, while some (1b, 1c, 2, 5a and 5b) were clicked to azide functionalised nanomaterials and then drop-dried on the electrodes. One phthalocyanine (5b) was drop-dried on the electrode then silver nanoparticles were electrodeposited on it taking advantage of metal-N bond. Scanning electrochemical microscopy, voltammetry, chronoamperometry, electrochemical impedance spectroscopy are among electrochemical methods used to characterise modified electrodes. Transmission electron microscopy, X-ray photoelectron spectroscopy, Xray diffractometry, Raman spectroscopy and infrared spectroscopy were employed to study surface functionalities, morphology and topography of the nanomaterials and complexes. Electrocatalytic activity of the developed materials were studied towards oxidation of 2-mercaptoethanol, hydrazine and hydrogen peroxide while the reduction study was based on oxygen and hydrogen peroxide. In general, the conjugates displayed superior catalytic activity when compared to individual materials. Complex 2 alone and when conjugated to zinc oxide nanoparticles were studied for their nonlinear optical behaviour. And the same materials were explored for their hydrazine detection capability. The aim of this study was to develop sensitive, selective and affordable sensors for selected organic waste pollutants. Conjugates were found to achieve the aim of the study compared to when individual materials were employed.
- Full Text:
- «
- ‹
- 1
- ›
- »