Applications of Baylis-Idllman methodology in the synthesis of chromene derivatives
- Authors: Nocanda, Xolani Wittleton
- Date: 2001
- Subjects: Heterocyclic chemistry , Heterocyclic compounds -- Derivatives
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4556 , http://hdl.handle.net/10962/d1018257
- Description: The reaction of salicylaldehyde with various activated alkenes, viz., methyl vinyl ketone, ethyl vinyl ketone, phenyl vinyl sulfone, phenyl vinylsulfonate, acrolein and acrylonitrile, under Baylis-Hillman conditions, has been found to proceed with the chemoselective formation of chromene derivatives. The reaction conditions have been optimised and chromene derivatives have been obtained in isolated yields up to 87 %. The generality of the reaction, using 1,4-diazabicyclo[2.2.2]octane (DABCO), as the catalyst, and a heterogeneous (chloroform-water) solvent system, has been established using a range of salicylaldehyde derivatives,. including 2-hydroxynaphthaldehyde. The formation of chromene derivatives, under these conditions, has been assumed to proceed via an initial, Baylis-Hillman reaction, followed by cyclisation involving intramolecular conjugate addition, and subsequent dehydration. Evidence supporting this sequence has been obtained from the isolation ofBaylis-Hillman products from reactions involving the use of tertbutylclimethylsilyl-protected salicylaldehyde, 4-hydroxybenzaldehyde and tert-butyl acrylate as substrates. The potential of the ''Baylis-Hillman zwitterion" to participate as a donor species in Michael-type addition reactions has been explored and a series of climeric products has been isolated. The Baylis-Hillman methodology has also been successfully extended to the synthesis of sulfurcontaining heterocyclic systems, and a range of 3-substituted thiochromenes has been obtained in moderate yields, using 2,2'-dithiobenzaldehyde and various activated alkenes in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as catalyst. The electron-impact mass spectra of selected chromene and thiocbromene derivatives have been investigated permitting comparison of the fragmentation of the oxygen- and sulfur-containing analogues. In a study directed at the synthesis of potential HIV -1 protease inhibitors, chromene- and thiocbromene-containing analogues of the clinically useful drug, ritonavir, have been prepared. Thiochromene and chromene derivatives were converted to the corresponding 3 -carboxylic acids and coupled with a specially prepared, hydroxyethylene dipeptide isostere to afford ritonavir analogues containing cbromene and thiochromene termini in ca. 60% yield.
- Full Text:
- Date Issued: 2001
- Authors: Nocanda, Xolani Wittleton
- Date: 2001
- Subjects: Heterocyclic chemistry , Heterocyclic compounds -- Derivatives
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4556 , http://hdl.handle.net/10962/d1018257
- Description: The reaction of salicylaldehyde with various activated alkenes, viz., methyl vinyl ketone, ethyl vinyl ketone, phenyl vinyl sulfone, phenyl vinylsulfonate, acrolein and acrylonitrile, under Baylis-Hillman conditions, has been found to proceed with the chemoselective formation of chromene derivatives. The reaction conditions have been optimised and chromene derivatives have been obtained in isolated yields up to 87 %. The generality of the reaction, using 1,4-diazabicyclo[2.2.2]octane (DABCO), as the catalyst, and a heterogeneous (chloroform-water) solvent system, has been established using a range of salicylaldehyde derivatives,. including 2-hydroxynaphthaldehyde. The formation of chromene derivatives, under these conditions, has been assumed to proceed via an initial, Baylis-Hillman reaction, followed by cyclisation involving intramolecular conjugate addition, and subsequent dehydration. Evidence supporting this sequence has been obtained from the isolation ofBaylis-Hillman products from reactions involving the use of tertbutylclimethylsilyl-protected salicylaldehyde, 4-hydroxybenzaldehyde and tert-butyl acrylate as substrates. The potential of the ''Baylis-Hillman zwitterion" to participate as a donor species in Michael-type addition reactions has been explored and a series of climeric products has been isolated. The Baylis-Hillman methodology has also been successfully extended to the synthesis of sulfurcontaining heterocyclic systems, and a range of 3-substituted thiochromenes has been obtained in moderate yields, using 2,2'-dithiobenzaldehyde and various activated alkenes in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as catalyst. The electron-impact mass spectra of selected chromene and thiocbromene derivatives have been investigated permitting comparison of the fragmentation of the oxygen- and sulfur-containing analogues. In a study directed at the synthesis of potential HIV -1 protease inhibitors, chromene- and thiocbromene-containing analogues of the clinically useful drug, ritonavir, have been prepared. Thiochromene and chromene derivatives were converted to the corresponding 3 -carboxylic acids and coupled with a specially prepared, hydroxyethylene dipeptide isostere to afford ritonavir analogues containing cbromene and thiochromene termini in ca. 60% yield.
- Full Text:
- Date Issued: 2001
Chemical studies of chromone derivatives
- Authors: Sabbagh, Liezel Veronica
- Date: 2001
- Subjects: Benzopyrans Heterocyclic compounds -- Derivatives Coumarins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4424 , http://hdl.handle.net/10962/d1006899
- Description:
This study has focussed on several aspects of chromone chemistry, viz., (i) the influence of remote substituents on the basicity of 2-(N,N-dimethylamino)chromones, (ii) MoritaBaylis-Hillman reactions of substituted chromone-3-carbaldehydes and (iii) an investigation into the application of chromone chemistry in the total synthesis of the marine natural product, Rietone A. Selected 2-(N,N-dimethylamino )chromones were prepared using two different methods; firstly, via cyclisation of salicylate-derived N,N-dimethyl-3;.(2-hydroxyphenyl)-3- oxopropanamide precursors and, secondly, via 2-hydroxyacetophenone boron difluoride complexes. ¹³C NMR analysis of the 6- and 7-methoxy-2-(N,N-dimethylamino)chromones confirmed that protonation occurs at the chromone carbonyl oxygen rather than the amino nitrogen - a conclusion supported by mol~cular orbital calculations. Potentiometric analysis of 2-(N,N-dimethylamino )chromones in ethanol-water afforded pKa (pK [subscript a]) values in the range 2.22 - 2.52. The observed trend has been rationalised in terms of substituent effects with the aid of molecular orbital calculations at the semi-empirical and ab initio levels, while hydrogen-bonding effects have been used to account for the apparently anomalous result obtained for the 6-nitro derivative. A series of seven substituted chromone-3-carbaldehydes, prepared by the application of Vilsmeier-Haack methodology to the corresponding 2-hydroxyacetophenones, have been examined as substrates for Morita-Baylis-Hillman reactions, using DABCO as the catalyst and three different activated alkenes, viz., methyl acrylate, methyl vinyl ketone and acrylonitrile. In all cases, with the exception of 6-nitrochromone-3-carbaldehyde, the reactions have been shown to afford the expected Morita-Baylis-Hillman products. Use of methyl acrylate and methyl vinyl ketone as the activated alkene has been observed to afford additional, unprecedented dimeric products, which have been unambiguously characterised using a combination of single crystal X-ray analysis and spectroscopic (high resolution MS and NMR) techniques. Different dimer-like adducts have been isolated from reactions in which acrylonitrile was used as the activated alkene, and the structures of these novel products have-been determined
- Full Text:
- Date Issued: 2001
- Authors: Sabbagh, Liezel Veronica
- Date: 2001
- Subjects: Benzopyrans Heterocyclic compounds -- Derivatives Coumarins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4424 , http://hdl.handle.net/10962/d1006899
- Description:
This study has focussed on several aspects of chromone chemistry, viz., (i) the influence of remote substituents on the basicity of 2-(N,N-dimethylamino)chromones, (ii) MoritaBaylis-Hillman reactions of substituted chromone-3-carbaldehydes and (iii) an investigation into the application of chromone chemistry in the total synthesis of the marine natural product, Rietone A. Selected 2-(N,N-dimethylamino )chromones were prepared using two different methods; firstly, via cyclisation of salicylate-derived N,N-dimethyl-3;.(2-hydroxyphenyl)-3- oxopropanamide precursors and, secondly, via 2-hydroxyacetophenone boron difluoride complexes. ¹³C NMR analysis of the 6- and 7-methoxy-2-(N,N-dimethylamino)chromones confirmed that protonation occurs at the chromone carbonyl oxygen rather than the amino nitrogen - a conclusion supported by mol~cular orbital calculations. Potentiometric analysis of 2-(N,N-dimethylamino )chromones in ethanol-water afforded pKa (pK [subscript a]) values in the range 2.22 - 2.52. The observed trend has been rationalised in terms of substituent effects with the aid of molecular orbital calculations at the semi-empirical and ab initio levels, while hydrogen-bonding effects have been used to account for the apparently anomalous result obtained for the 6-nitro derivative. A series of seven substituted chromone-3-carbaldehydes, prepared by the application of Vilsmeier-Haack methodology to the corresponding 2-hydroxyacetophenones, have been examined as substrates for Morita-Baylis-Hillman reactions, using DABCO as the catalyst and three different activated alkenes, viz., methyl acrylate, methyl vinyl ketone and acrylonitrile. In all cases, with the exception of 6-nitrochromone-3-carbaldehyde, the reactions have been shown to afford the expected Morita-Baylis-Hillman products. Use of methyl acrylate and methyl vinyl ketone as the activated alkene has been observed to afford additional, unprecedented dimeric products, which have been unambiguously characterised using a combination of single crystal X-ray analysis and spectroscopic (high resolution MS and NMR) techniques. Different dimer-like adducts have been isolated from reactions in which acrylonitrile was used as the activated alkene, and the structures of these novel products have-been determined
- Full Text:
- Date Issued: 2001
Design, synthesis and evaluation of silver-specific ligands
- Authors: Daubinet, André
- Date: 2001
- Subjects: Ligands Ligands -- Design Ligands -- Analysis Ligands -- Evaluation Silver -- Metallurgy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4308 , http://hdl.handle.net/10962/d1004966
- Description: Several series of ligands, designed to chelate silver(I) specifically in the presence of base metals, have been synthesised. The ligands include: - dithiodiamide compounds, prepared by the condensation of acetanilide derivatives with 1,2-dibromoethane; propanenitrile and propanoic ester derivatives prepared from pyridine-2-carbaldehyde via the Morita-Baylis-Hillman reaction; and novel malonamide ligands from the reaction of diethyl malonate with a range of primary amines. The malonamide derivatives were prepared under both conventional thermal and microwave-assisted conditions, the latter proving to be highly efficient. The ligands were all characterised using a combination of spectroscopic and, where appropriate, elemental analysis; in one case, the structural assignment was confirmed by single-crystal X-ray analysis. The fragmentation patterns in the electron-impact mass spectra of the malonamide derivatives have been explored using high-resolution and meta-stable peak scanning techniques. Complexes of the malonamide ligands with copper(II) and silver(I) have been synthesised, and examination of these complexes has revealed distinct differences in their co-ordination preferences towards silver(I) and copper(II). Tentative, computer-modelled structures for the complexes have been proposed using the available spectroscopic and elemental analysis data. Computer modelling, at the Molecular Mechanics level, has also been used to assess the capacity of the ligand systems to adopt conformations suitable for the chelation of tetrahedral silver(I). Solvent extraction studies have been undertaken using aqueous metal ion solutions and various organic solvents. The dithiodiamide derivatives typically presented solubility problems, but one of the ligands, N,N´-bis(3-chlorophenyl)-3,6-dithiaoctanediamide, exhibited significant but slow extraction of silver(I) into toluene. The malonamide derivatives, however, proved to be readily soluble in ethyl acetate and, in some cases, exhibited good to excellent selectivity for silver(I) in the presence of the base metals copper and lead. Atomic absorption analysis revealed rapid equilibration times (<15 min) and high extraction efficiencies over a wide pH range (2.78 - 9.0). Metal selectivity has been determined by ICP-MS analysis of the residual silver, copper and lead present in the aqueous phase after 15 min, and one of the ligands, N,N´-bis(2-benzylsulfanylethyl)malonamide, exhibits excellent (≥ 96 %) silver(I) specificity.
- Full Text:
- Date Issued: 2001
- Authors: Daubinet, André
- Date: 2001
- Subjects: Ligands Ligands -- Design Ligands -- Analysis Ligands -- Evaluation Silver -- Metallurgy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4308 , http://hdl.handle.net/10962/d1004966
- Description: Several series of ligands, designed to chelate silver(I) specifically in the presence of base metals, have been synthesised. The ligands include: - dithiodiamide compounds, prepared by the condensation of acetanilide derivatives with 1,2-dibromoethane; propanenitrile and propanoic ester derivatives prepared from pyridine-2-carbaldehyde via the Morita-Baylis-Hillman reaction; and novel malonamide ligands from the reaction of diethyl malonate with a range of primary amines. The malonamide derivatives were prepared under both conventional thermal and microwave-assisted conditions, the latter proving to be highly efficient. The ligands were all characterised using a combination of spectroscopic and, where appropriate, elemental analysis; in one case, the structural assignment was confirmed by single-crystal X-ray analysis. The fragmentation patterns in the electron-impact mass spectra of the malonamide derivatives have been explored using high-resolution and meta-stable peak scanning techniques. Complexes of the malonamide ligands with copper(II) and silver(I) have been synthesised, and examination of these complexes has revealed distinct differences in their co-ordination preferences towards silver(I) and copper(II). Tentative, computer-modelled structures for the complexes have been proposed using the available spectroscopic and elemental analysis data. Computer modelling, at the Molecular Mechanics level, has also been used to assess the capacity of the ligand systems to adopt conformations suitable for the chelation of tetrahedral silver(I). Solvent extraction studies have been undertaken using aqueous metal ion solutions and various organic solvents. The dithiodiamide derivatives typically presented solubility problems, but one of the ligands, N,N´-bis(3-chlorophenyl)-3,6-dithiaoctanediamide, exhibited significant but slow extraction of silver(I) into toluene. The malonamide derivatives, however, proved to be readily soluble in ethyl acetate and, in some cases, exhibited good to excellent selectivity for silver(I) in the presence of the base metals copper and lead. Atomic absorption analysis revealed rapid equilibration times (<15 min) and high extraction efficiencies over a wide pH range (2.78 - 9.0). Metal selectivity has been determined by ICP-MS analysis of the residual silver, copper and lead present in the aqueous phase after 15 min, and one of the ligands, N,N´-bis(2-benzylsulfanylethyl)malonamide, exhibits excellent (≥ 96 %) silver(I) specificity.
- Full Text:
- Date Issued: 2001
Novel approaches to the synthesis of quinoline derivatives
- Authors: Klaas, Phindile Jonathan
- Date: 2001 , 2013-04-26
- Subjects: Quinoline--Synthesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4299 , http://hdl.handle.net/10962/d1004751 , Quinoline--Synthesis
- Description: The investigation has been concerned with the application of the Baylis-Hillman methodology to the synthesis of quinoline derivatives. An extensive range of novel Baylis-Hillman products has been prepared, typically in moderate to excellent yields, by condensing 2-nitrobenzaldehyde derivatives with various vinyl ketones and acrylic esters in the presence of diazabicyclo[2.2.2]octane (DABCO). Reduction of the nitro group in the Baylis-Hillman products was effected by catalytic hydrogenation in ethanol using a 10% palladium-on-carbon catalyst to afford quinoline, quinoline-N-oxide and quinolone derivatives. In all cases, it is apparent that cyclisation involves exclusive attack of nucleophilic nitrogen at the carbonyl centre, with acrylic ester derivatives affording quinolones and vinyl ketone derivatives affording quinolines and the corresponding quinoline-N-oxides. No products arising from a conjugate addition pathway were observed. The use of stannous chloride as an alternative reagent to effect reductive cyclisation of the Baylis-Hillman products has been explored, and found to favour the formation of 1,2- dihydroquinoline derivatives, with cyclisation occurring via a conjugate addition pathway. Isolation of the products, following work-up of the stannous chloride reactions, however, presented some difficulty. All compounds were characterised by spectroscopic (NMR and IR) and, where appropriate, elemental (high-resolution MS) analysis. Interconversion of the quinoline and quinoline-N-oxide derivatives has been explored and finally achieved in quantitative yields. Reduction of 2,3-dimethylquinoline-N-oxide to the corresponding quinoline was effected using phosphorus tribromide in DMF, and the reverse transformation with meta-chloroperbenzoic acid (MCPBA) in CHCl₃. Application of these methods to mixtures of 2,3-dimethylquinoline and its N-oxide has afforded, selectively, either the quinoline derivative or the corresponding N-oxide. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 2001
- Authors: Klaas, Phindile Jonathan
- Date: 2001 , 2013-04-26
- Subjects: Quinoline--Synthesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4299 , http://hdl.handle.net/10962/d1004751 , Quinoline--Synthesis
- Description: The investigation has been concerned with the application of the Baylis-Hillman methodology to the synthesis of quinoline derivatives. An extensive range of novel Baylis-Hillman products has been prepared, typically in moderate to excellent yields, by condensing 2-nitrobenzaldehyde derivatives with various vinyl ketones and acrylic esters in the presence of diazabicyclo[2.2.2]octane (DABCO). Reduction of the nitro group in the Baylis-Hillman products was effected by catalytic hydrogenation in ethanol using a 10% palladium-on-carbon catalyst to afford quinoline, quinoline-N-oxide and quinolone derivatives. In all cases, it is apparent that cyclisation involves exclusive attack of nucleophilic nitrogen at the carbonyl centre, with acrylic ester derivatives affording quinolones and vinyl ketone derivatives affording quinolines and the corresponding quinoline-N-oxides. No products arising from a conjugate addition pathway were observed. The use of stannous chloride as an alternative reagent to effect reductive cyclisation of the Baylis-Hillman products has been explored, and found to favour the formation of 1,2- dihydroquinoline derivatives, with cyclisation occurring via a conjugate addition pathway. Isolation of the products, following work-up of the stannous chloride reactions, however, presented some difficulty. All compounds were characterised by spectroscopic (NMR and IR) and, where appropriate, elemental (high-resolution MS) analysis. Interconversion of the quinoline and quinoline-N-oxide derivatives has been explored and finally achieved in quantitative yields. Reduction of 2,3-dimethylquinoline-N-oxide to the corresponding quinoline was effected using phosphorus tribromide in DMF, and the reverse transformation with meta-chloroperbenzoic acid (MCPBA) in CHCl₃. Application of these methods to mixtures of 2,3-dimethylquinoline and its N-oxide has afforded, selectively, either the quinoline derivative or the corresponding N-oxide. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 2001
- «
- ‹
- 1
- ›
- »