Carbonylation of cyclohexene with carbon dioxide (CO2) using transition metals as heterogeneous and homogeneous catalysts
- Authors: Sekaleli, Bafokeng Thabelo
- Date: 2024-10-11
- Subjects: Carbonylation , Carbon dioxide , Catalysts , Transition metals , Cyclohexene
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/464565 , vital:76522
- Description: From a green chemistry perspective, carbon dioxide (CO2) emerges as an appealing C1 synthon, given its abundance in the atmosphere and cost-effectiveness. Many essential chemicals for daily life are derived from fossilized carbon sources like coal, petroleum, and natural gas. However, the by-product of these processes, CO2, poses environmental risks when excessively emitted as a greenhouse gas. Achieving a balance between carbon emissions and removal is crucial to address environmental concerns surrounding CO2. Utilizing CO2 as a C1 source in organic synthesis holds promise for mitigating this balance in the long term. Combining CO2 with other underutilized fine chemicals, such as alkanes, alkenes, and alkynes, to produce more valuable platform chemicals presents an economically viable strategy due to carbon dioxide’s abundance, low cost, and recyclability. Despite its simplicity, CO2's high thermodynamic stability and low kinetic reactivity, owing to its highly oxidized state, pose challenges to its use as a feedstock. Overcoming these hurdles requires catalysts to enhance CO2 reactivity. Our work focuses on developing and employing catalytic systems capable of activating CO2 as a C1 synthon in reactions with cyclohexene and a reducing agent to yield carboxylic acids or esters. In one approach, we have developed heterogeneous catalyst systems comprising transition metals (Au, Fe, Ni, Ru) supported on metal oxide (TiO2). Characterization techniques such as TEM, EDX, UV-Vis, BET, and XRD were used to study the properties of these materials. The catalysts were evaluated in a reaction involving cyclohexene, CO2, and H2O. In another approach, we explored the use of cyclo-tris(tetracarbonylruthenium) [Ru3(CO)12] as a homogeneous catalyst in a reaction involving cyclohexene, methanol, and CO2 in the presence of an ionic liquid, 1-Butyl-3-methylimidazolium chloride ([BMIM]+Cl-). 1H NMR and ATR-FT-IR were utilized to characterize [BMIM]+Cl-. The reaction product was characterised utilizing GC-MS. Upon seeing that Ru3(CO)12 changes color from orange to black when exposed to heat, an investigation was undertaken on the kind of transformations that the catalyst undergoes. This investigation was carried out with the hopes of finding the structures that could be resulting from Ru3(CO)12 during the reaction and their significance to it. The orange and black Ru complexes were characterized utilizing DSC, TGA, ATR-FT-IR and PXRD. , Thesis (MSc) -- Faculty of Science, Chemistry, 2024
- Full Text:
Mannich base metal complexes and their thiocyanate analogues as catalysts in the oxidation of Catechol
- Authors: Ayeni, Ayowole Olaolu
- Date: 2018
- Subjects: Mannich bases , Catechol , Catechol -- Oxidation , Thiocyanates , Catalysts
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/62339 , vital:28156
- Description: The study focused on the design of new Cu(II) and Fe(III) complexes, with or without thiocyanate (NCS-), as possible candidates of catechol oxidation using 3,5-di-tert-butyl catechol (3,5-DTBC) as substrate. Two classes of Mannich bases were studied depending on the active methylene group from which they were formed, being either p-cresol or acetaminophen. The ligands were characterised by 1H and 13C NMR spectroscopy. Crystal structures of three of the ligands are newly reported, along with detailed discussion of polymorphism observed in one of the ligands, and the nature of the hydrogen within the ligands in the solid state as well as in solution. The Mannich bases behaved as bidentate (NO), tridentate (NNO) and tetradentate (NNOO) ligands on coordination to Cu(II) and Fe(III) ions in which the hydroxyl group may be protonated or deprotonated. Coordination was determined by IR spectroscopy, investigating shifts in vOH, vC-O and in vCNC of the Mannich bases. The vCNC stretching frequencies v1 and v2 of asymmetrical piperazine Mannich bases were observed to shift upward in few cases upon complexation and this is attributed to (chair-boat) conformational change. The mode of coordination of the thiocyanate was determined by IR spectroscopy. Of the forty metal complexes investigated, six groups of metal complexes were identified as follows: (i) Ma(Ln)aClb-cH2O; (ii) Ma(HLn)a(NCS)aClb; (iii) Ma(Ln)a(NCS)aClb; (iv) Ma(HLn)aClb-cH2O; (v) Ma(Ln)a(NCS)a-cH2O; (vi) Ma(HLn)a(NCS)a-cH2O where a = 1 - 2 ; b = 1 - 4, c = 1 - 8. Molar conductivity values of 4.38 - 161.77 Q-1.cm2.mol-1 for the Cu(II) and Fe(III) complexes in DMSO showed that they range from non-electrolytes to 1:1 and 1:2 electrolytes. Electronic spectra for the ligands and the complexes were conducted in DMF and DMSO. The ligands are characterised by and n→n* and n→n* transitions. Intraligand charge transfer transitions peculiar to the nitro group were observed at about 430 nm for the nitro containing ligands. On coordination, these bands overshadowed the d-d transitions particularly for the nitro-Mannich bases. On complexation, ligand to metal charge transfer transitions associated with the hydroxyl were observed between 320 - 420 nm. Charge transfer transitions associated with the thiocyanates were also observed and discussed. The d-d transitions for high spin Fe(III) complexes are spin forbidden and generally uninformative. Those of Cu(II) are spin allowed and allow tentative structural proposals. Square planar and octahedral geometry are generally prevalent in the Cu(II) complexes with trigonal bipyramidal observed in few instances. The Fe(III) complexes are generally octahedral. Thirty-nine of the forty synthesised Cu(II) and Fe(III) complexes were catalytically active on the substrate (3,5-DTBC) in DMF with turnover rates (kcat) reported in the range of 1.86 ± 0.09 to 112.32 ± 3.72 h-1. From this pool of complexes, sixteen isostructural pairs were identified in terms of geometry, molecular formula and the source of the Mannich base and the following conclusions were made: The presence of thiocyanate in the metal complexes reduce catecholase activity; the Cu(II) complexes generally have better activity but the Fe(III) complexes become more relatively active with highly electron donating groups while the Cu(II) complexes become less; dinuclear complexes have greater activity than the mononuclear.
- Full Text:
Application of catalysts and nanomaterials in the design of an electrochemical sensor for ochratoxin A
- Authors: Flanagan, Shane Patrick
- Date: 2011 , 2010-12-06
- Subjects: Ochratoxins , Filamentous fungi , Electrochemical sensors , Nanostructured materials , Catalysts , Food contamination
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4121 , http://hdl.handle.net/10962/d1013328
- Description: Ochratoxin A is the most potent chlorinated derivative of the ochratoxin group, consisting of a 5'-chlorinated dihydroisocoumarin moiety linked by an amide bond to l-phenylalanine. Produced as a secondary fungal metabolite by several species of Aspergillus and Penicillium, ochratoxin A has been shown to readily contaminate a large variety of commodities including cereals, groundnuts, dried fruit, spices and coffee. This has led to widespread contamination of ochratoxin in wine, beer, milk and meat products. As ochratoxin A is a potent nephrotoxin exhibiting teratogenic and carcinogenic properties, the development of a rapid screening platform for the cost effective control of ochratoxin A content in foodstuffs is therefore required. The evaluation of metallophthalocyanine and carbon nanotube electrode modification toward the development of a nanostructured biosensor capable of enhancing the electrochemical detection of ochratoxin A in complex media is presented. Cyclic voltammetry at a glassy carbon electrode allowed for the optimization of detection parameters including pH and type of supporting electrolyte. Britton-Robinson buffer was found to be the most suitable supporting electrolyte in terms of sensitivity and reproducibility obtaining a LOD of 0.28 μM as determined by differential pulse voltammetry. Subsequent analysis determined the dependence of OTA oxidation on pH in acidic media which proceeds with the transfer of two electrons to form a quinone/hydroquinone couple shown to adsorb to the electrode surface. Passivation of the electrode through adsorption of oxidation products was shown to severely limit the detection of OTA upon successive detection cycles. Comparison of various metallophthalocyanine modifiers showed an increase in sensitivity toward the detection of OTA at phthalocyanine complexes with metal based redox processes. However with the exception of NiPc and CoTCPc complexes, phthalocyanine modification was limited by the increase in deviation of current response and extent of fouling. NiPc modification showed an increase in sensitivity by two fold with fouling characteristics comparable to an unmodified electrode while low improvements in fouling was observed at CoTCPc modified electrodes with sensitivity in detection comparable to an unmodified electrode.Modification of the electrode with multi- and single walled carbon nanotubes produced a significant increase in sensitivity toward the detection of ochratoxin A. The electrocatalytic activity of nanotube modifiers was attributed to the increase in surface area and to the addition of oxygenated functional groups upon acid treatment as confirmed by Raman spectroscopy. Acid functionalization of the carbon nanotubes for a period of two hours produced the greatest increase in sensitivity obtaining a respective LOD of 0.09 μM and 0.03 μM for analysis of ochratoxin A at multi- and single walled carbon nanotube modified electrodes. Centrifugal purification of carbon nanotubes was deemed necessary to improve the electrocatalytic activity of the nanotube modifiers through the removal of carbonaceous impurities as visualized by atomic force microscopy. Furthermore, a crude lipase preparation, lipase A, was investigated as a potential biological recognition element for selective detection of ochratoxin A in complex media. Lipase A enabled the hydrolysis of ochratoxin A to the electroactive species ochratoxin α as confirmed by thin layer chromatography and voltammetric analysis. Additional isolation of a pure hydrolase from the lipase A preparation is required prior to utilization within a nanostructured biosensor platform capable of detecting ochratoxin A in complex media.
- Full Text: