Photocatalytic reduction of CO2 by cobalt doped TiO2 and ZnO micro/nanostructured materials
- Authors: Mgolombane, Mvano
- Date: 2020
- Subjects: Nanostructures , Catalysis , Nanotechnology , Chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/49171 , vital:41607
- Description: Large emissions of carbon dioxide (CO2) in the atmosphere have caused many harmful effects on humans and the environment. Carbon dioxide is a good source C and is used in a number of applications such as synthesis of fossil fuels. Redox reaction of CO2 and H2O with photocatalysts such as TiO2 and ZnO to produce solar fuels is a promising approach in reducing the environmental impacts of greenhouse gasses. This dissertation describes an in-depth synthesis of four photochemical catalysts and their photocatalytic conversion of CO2 to methanol, thereby addressing the above-mentioned problems by applying synthesised nano-based catalysts. Prior to photocatalytic reduction studies, catalysts such as TiO2, Co-doped TiO2, Co-doped TiO2/rGO, ZnO, Co-doped ZnO and Co-doped ZnO/rGO were synthesized and characterized using various spectroscopic and imaging techniques such as Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), Transmission Electron Micrograph (TEM), X-ray Photoelectron Spectroscopy (XPS), Brunner- Emmet- Teller measurement (BET), Thermogravimetry Analysis (TGA) and UV-Vis Diffuse Reflectance Spectroscopy (UV-Vis-DRS). The conversion yield of CO2 to methanol on TiO2, Co-doped TiO2 and Co-doped TiO2/rGO reached 32.3 μmol/gcat, 730 μmol/gcat and 936 μmol/gcat, respectively, after 7 h of irradiation. Theoretical studies via Density functional theory (DFT) revealed that doping TiO2 with Co ions facilitated the formation of adsorbed carbonate or CO2•- species, as CO2 adsorbs onto Co-doped TiO2 surface with binding energy (BE) of -18.12 KJ/mol. The photocatalytic activities of ZnO-based nanomaterials found that Co-doped ZnO/rGO with high ratio of Co, reduced graphene (rGO) and large surface area (10.62 m2g-1) possessed higher CH3OH (30.1 μmol/g) in comparison with Co-doped ZnO (27.3 μmol/g) and ZnO (7.5 μmol/g). The research will deepen the understanding that TiO2 based photocatalyst show higher activity and the mole ratio (Ti/Zn:Co) influences nanocomposites performance and provide new ideas for designing efficient photocatalysts.
- Full Text:
- Date Issued: 2020
- Authors: Mgolombane, Mvano
- Date: 2020
- Subjects: Nanostructures , Catalysis , Nanotechnology , Chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/49171 , vital:41607
- Description: Large emissions of carbon dioxide (CO2) in the atmosphere have caused many harmful effects on humans and the environment. Carbon dioxide is a good source C and is used in a number of applications such as synthesis of fossil fuels. Redox reaction of CO2 and H2O with photocatalysts such as TiO2 and ZnO to produce solar fuels is a promising approach in reducing the environmental impacts of greenhouse gasses. This dissertation describes an in-depth synthesis of four photochemical catalysts and their photocatalytic conversion of CO2 to methanol, thereby addressing the above-mentioned problems by applying synthesised nano-based catalysts. Prior to photocatalytic reduction studies, catalysts such as TiO2, Co-doped TiO2, Co-doped TiO2/rGO, ZnO, Co-doped ZnO and Co-doped ZnO/rGO were synthesized and characterized using various spectroscopic and imaging techniques such as Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), Transmission Electron Micrograph (TEM), X-ray Photoelectron Spectroscopy (XPS), Brunner- Emmet- Teller measurement (BET), Thermogravimetry Analysis (TGA) and UV-Vis Diffuse Reflectance Spectroscopy (UV-Vis-DRS). The conversion yield of CO2 to methanol on TiO2, Co-doped TiO2 and Co-doped TiO2/rGO reached 32.3 μmol/gcat, 730 μmol/gcat and 936 μmol/gcat, respectively, after 7 h of irradiation. Theoretical studies via Density functional theory (DFT) revealed that doping TiO2 with Co ions facilitated the formation of adsorbed carbonate or CO2•- species, as CO2 adsorbs onto Co-doped TiO2 surface with binding energy (BE) of -18.12 KJ/mol. The photocatalytic activities of ZnO-based nanomaterials found that Co-doped ZnO/rGO with high ratio of Co, reduced graphene (rGO) and large surface area (10.62 m2g-1) possessed higher CH3OH (30.1 μmol/g) in comparison with Co-doped ZnO (27.3 μmol/g) and ZnO (7.5 μmol/g). The research will deepen the understanding that TiO2 based photocatalyst show higher activity and the mole ratio (Ti/Zn:Co) influences nanocomposites performance and provide new ideas for designing efficient photocatalysts.
- Full Text:
- Date Issued: 2020
Synthesis and application of fluorescent triazolyl-coumarin based chemosensors
- Authors: Schoeman, Stiaan
- Date: 2020
- Subjects: Chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/47454 , vital:39992
- Description: The search for a fluorescent chemosensor with high selectivity and sensitivity that can be used for the detection of trace amounts of a toxic transition metal or heavy metal ions have gained immense popularity in recent years. Coumarin derivatives have been widely used as the basis of these fluorescent chemosensors by which a 1,2,3-triazole ring is used as the binding site for such metal ions. The benefits of chemosensors include nearly eliminating the need for tedious sample preparation and highly skilled operators. Therefore, enabling quantitative and qualitative measurement in both a lab setting and on-site. In addition, chemosensors provide a more sensitive and selective detection method at low-cost. A variety of chemosensors were designed and synthesized, in which some synthesis steps were refined to obtain better yields and purer products. Chemosensors designed, in this study, can be divided into novel triazolyl-coumarin derivatives without a spacer 1C – 1D and with a spacer between the coumarin and triazole ring (2D and 2E). 1C – 1D were characterized by 1H NMR, 13C NMR and IR and photophysical properties were investigated in DMF. 2D and 2E could not be purified and further investigation was discontinued. An overall enhancement was observed for the chemosensors 1C – 1D in the presence of 24 different ions that were tested. 1C had a quenching effect in the presence of Cd2+, however, competition studies revealed that 1C is not selective in the presence of competing metal cations. Molecular modelling studies were performed on sensors 1C – 1G in the presence of various ions. The molecular modelling studies provided invaluable insights into the binding of the selected metal ions as well as revealed a variety of binding sites. In addition, the space-filled depictions offered insights into the overlapping during binding which had an effect in the electrostatic potential maps of the chemosensors..
- Full Text:
- Date Issued: 2020
- Authors: Schoeman, Stiaan
- Date: 2020
- Subjects: Chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/47454 , vital:39992
- Description: The search for a fluorescent chemosensor with high selectivity and sensitivity that can be used for the detection of trace amounts of a toxic transition metal or heavy metal ions have gained immense popularity in recent years. Coumarin derivatives have been widely used as the basis of these fluorescent chemosensors by which a 1,2,3-triazole ring is used as the binding site for such metal ions. The benefits of chemosensors include nearly eliminating the need for tedious sample preparation and highly skilled operators. Therefore, enabling quantitative and qualitative measurement in both a lab setting and on-site. In addition, chemosensors provide a more sensitive and selective detection method at low-cost. A variety of chemosensors were designed and synthesized, in which some synthesis steps were refined to obtain better yields and purer products. Chemosensors designed, in this study, can be divided into novel triazolyl-coumarin derivatives without a spacer 1C – 1D and with a spacer between the coumarin and triazole ring (2D and 2E). 1C – 1D were characterized by 1H NMR, 13C NMR and IR and photophysical properties were investigated in DMF. 2D and 2E could not be purified and further investigation was discontinued. An overall enhancement was observed for the chemosensors 1C – 1D in the presence of 24 different ions that were tested. 1C had a quenching effect in the presence of Cd2+, however, competition studies revealed that 1C is not selective in the presence of competing metal cations. Molecular modelling studies were performed on sensors 1C – 1G in the presence of various ions. The molecular modelling studies provided invaluable insights into the binding of the selected metal ions as well as revealed a variety of binding sites. In addition, the space-filled depictions offered insights into the overlapping during binding which had an effect in the electrostatic potential maps of the chemosensors..
- Full Text:
- Date Issued: 2020
Synthesis of 2,4-Xylidine in continuous flow systems
- Authors: Sagandira, Mellisa Brenda
- Date: 2020
- Subjects: Chemistry, Physical and theoretical -- Research , Chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/49270 , vital:41616
- Description: The continuous flow synthesis of 2,4-xylidine, an important compound in the fine chemical, pharmaceutical as well as the dyes and pigments industries was investigated in this study utilizing 1,3-dimethylbenzene as starting material. The first step involves the highly exothermic nitration of 1,3-dimethylbenzene with mixed acid to afford two nitro isomers, namely 1,3-dimethyl-2-nitrobenzene and 2,4-dimethyl-1-nitrobenzene. Since 2,4-xylidine is the targeted isomer, it is important to get a higher proportion of its nitration precursor 2,4-dimethyl-1-nitrobenzene. A safe and efficient synthesis of 2,4-dimethyl-1-nitrobenzene was therefore developed in continuous flow. This was aided by the micro reactor’s large surface area-to-volume ratio, one of the many features of continuous flow synthesis that enable rapid dissipation of heat allowing exothermic reactions to be conducted safely at ambient or higher temperatures. Two nitration protocols were developed using different micro reactors, a sonicated 1 ml PTFE tube reactor and 2 ml Uniqsis chip reactor. Using a sonicated PTFE tube reactor at room temperature and 15 min residence time, 2,4-dimethyl-1-nitrobenzene was afforded in 100 % conversion and 80 % selectivity. An increase in selectivity to 95 % and 90 % conversion towards 2,4-dimethyl-1-nitrobenzene was achieved using a 2 ml Uniqsis chip reactor at room temperature in 6 min residence time. This was accounted for due to efficient mixing of the two phases brought about by the reactor’s mixing structures, which are designed to create turbulent mixing. Scale-up synthesis of 2,4-dimethyl-1-nitrobenzene was conducted in a 4.5 ml LTF-XXL-ST-04 reactor at room temperature and 6 min residence time affording 90 % conversion and 95 % selectivity with a throughput of 16.6 g/h. Subsequently, reduction of 2,4-dimethyl-1-nitrobenzene to afford 2,4-xylidine was investigated in a 1 ml PTFE tube reactor (0.8 mm ID) using hydrazine in the presence of iron (III) 2,4-pentanedionate catalyst. Maximum conversion of 75 % was achieved at 170 °C in 15 min residence time. A more efficient reduction protocol was developed in a 2.7 ml packed column reactor (10 mm ID) using hydrazine in the presence of Pd/C at 50 °C and 2.5 min residence time affording 94 % conversion towards 2,4-xylidine. Lastly, multistep synthesis of 2,4-xylidine was performed using optimum conditions found using the 2 ml Uniqsis chip reactor and 2.7 ml packed column reactor with the incorporation of a phase separator. Joining the two reactors into a single continuous step afforded 100 % conversion and 95 % selectivity towards 2,4-xylidine with 8 min total residence time. Nitration of other organic compounds followed by reduction of the resultant nitro products was also investigated under respective optimum conditions determined for nitration of 1,3-dimethylbenzene and reduction of 2,4-dimethyl-1-nitrobenzene.
- Full Text:
- Date Issued: 2020
- Authors: Sagandira, Mellisa Brenda
- Date: 2020
- Subjects: Chemistry, Physical and theoretical -- Research , Chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/49270 , vital:41616
- Description: The continuous flow synthesis of 2,4-xylidine, an important compound in the fine chemical, pharmaceutical as well as the dyes and pigments industries was investigated in this study utilizing 1,3-dimethylbenzene as starting material. The first step involves the highly exothermic nitration of 1,3-dimethylbenzene with mixed acid to afford two nitro isomers, namely 1,3-dimethyl-2-nitrobenzene and 2,4-dimethyl-1-nitrobenzene. Since 2,4-xylidine is the targeted isomer, it is important to get a higher proportion of its nitration precursor 2,4-dimethyl-1-nitrobenzene. A safe and efficient synthesis of 2,4-dimethyl-1-nitrobenzene was therefore developed in continuous flow. This was aided by the micro reactor’s large surface area-to-volume ratio, one of the many features of continuous flow synthesis that enable rapid dissipation of heat allowing exothermic reactions to be conducted safely at ambient or higher temperatures. Two nitration protocols were developed using different micro reactors, a sonicated 1 ml PTFE tube reactor and 2 ml Uniqsis chip reactor. Using a sonicated PTFE tube reactor at room temperature and 15 min residence time, 2,4-dimethyl-1-nitrobenzene was afforded in 100 % conversion and 80 % selectivity. An increase in selectivity to 95 % and 90 % conversion towards 2,4-dimethyl-1-nitrobenzene was achieved using a 2 ml Uniqsis chip reactor at room temperature in 6 min residence time. This was accounted for due to efficient mixing of the two phases brought about by the reactor’s mixing structures, which are designed to create turbulent mixing. Scale-up synthesis of 2,4-dimethyl-1-nitrobenzene was conducted in a 4.5 ml LTF-XXL-ST-04 reactor at room temperature and 6 min residence time affording 90 % conversion and 95 % selectivity with a throughput of 16.6 g/h. Subsequently, reduction of 2,4-dimethyl-1-nitrobenzene to afford 2,4-xylidine was investigated in a 1 ml PTFE tube reactor (0.8 mm ID) using hydrazine in the presence of iron (III) 2,4-pentanedionate catalyst. Maximum conversion of 75 % was achieved at 170 °C in 15 min residence time. A more efficient reduction protocol was developed in a 2.7 ml packed column reactor (10 mm ID) using hydrazine in the presence of Pd/C at 50 °C and 2.5 min residence time affording 94 % conversion towards 2,4-xylidine. Lastly, multistep synthesis of 2,4-xylidine was performed using optimum conditions found using the 2 ml Uniqsis chip reactor and 2.7 ml packed column reactor with the incorporation of a phase separator. Joining the two reactors into a single continuous step afforded 100 % conversion and 95 % selectivity towards 2,4-xylidine with 8 min total residence time. Nitration of other organic compounds followed by reduction of the resultant nitro products was also investigated under respective optimum conditions determined for nitration of 1,3-dimethylbenzene and reduction of 2,4-dimethyl-1-nitrobenzene.
- Full Text:
- Date Issued: 2020
- «
- ‹
- 1
- ›
- »