Fabrication and characterization of ciprofloxacin loaded niosomes for transtympanic delivery
- Authors: Mhlanga, Asavela
- Date: 2022-04-06
- Subjects: Drug delivery systems , Liposomes , Ciprofloxacin , Quinolone antibacterial agents , Drug carriers (Pharmacy) , Drug stability , Lamellarity , Niosomes
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/290715 , vital:56777
- Description: Ciprofloxacin (CPH) is a broad-spectrum antibiotic used to treat bone, joint, and skin infections. It is commercially available as an extended-release tablet and as a cream dosage form. CPH is a bactericidal active pharmaceutical ingredient (API) of the fluoroquinolone drug class. It inhibits deoxyribonucleic acid (DNA) replication by inhibiting bacterial DNA topoisomerase and DNA gyrase enzymes. Common adverse effects include nausea, vomiting, unusual fatigue, pale skin, and may increase the risk of tendinitis, which could be a major concern. CPH is, according to the Biopharmaceutics Classification System (BCS), classified as a BCS class IV drug exhibiting low oral bioavailability, low solubility, and intestinal permeability. CPH was chosen as a good candidate for the study because of its stability in solutions, its low molecular weight (331.4 g/mol), and its moderate lipophilicity (log P = 0.28) [16]. The use of conventional ear drops in the ear is effective, avoids hepatic first metabolism and extensive protein binding and may reduce adverse effects as a low dose may be used to achieve a therapeutic effect. However, conventional ear drops and oral antibiotics have a long onset of action and have to be taken/applied in short intervals. For convenience and assurance of a long residence time in the ear, CPH may be delivered by using a niosomal formulation, a liquid at room temperature, to allow administration into the ear without the need to constantly apply the ear drops for long periods of time. A simple, rapid, precise, accurate, reproducible, and specific reversed-phase high-performance liquid chromatography (RP-HPLC) method using ultraviolet (UV) detection for the quantitation of CPH was developed and optimized using a central composite design (CCD). The method was validated using International Conference on Harmonisation (ICH) guidelines and was found to be linear, precise, accurate, and specific for the analysis of CPH. Since the method is specific, it was used to quantify CPH in commercial and experimental formulations and monitor CPH released during in-vitro release testing. The compatibility of CPH and potential excipients was investigated during preformulation studies using Fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) to identify and select suitable excipients for use during formulation development activities. No apparent interactions were evident between CPH, and the excipients tested. The probe sonication method was used to manufacture CPH loaded niosomes using different surfactants/surfactant combinations, and a combination of Tween® 80: sodium lauryl sulfate (SLS) was found to be the best composition in terms of both entrapment efficiency and Zeta potential. The limits for the independent input variables used for the manufacture included amplitude, sonication time, and amount of cholesterol were determined. Design of experiments (DOE) was used to design the study. The input variables investigated included amplitude, amount of cholesterol, and sonication time. The output or responses monitored included Zeta potential, vesicle size, polydispersity index (PDI), and entrapment efficiency. Non-ionic surfactant systems are predominantly stabilized by steric stabilization, and there is only a minor electrostatic element from adsorbed hydroxyl ions. With the inclusion of SLS it is to be expected that Zeta potential will be a contributing factor. DOE using Box-Behnken design (BBD) and response surface methodology (RSM) in addition to Artificial Neural Networks (ANN) were used for the optimization of the formulation. The optimized formulation had a composition of 1 g cholesterol, 1 g of Tween® 80, 1 g of SLS and was prepared at an amplitude of 11.294 % with a sonication time of 3.304 minutes. The formulation exhibited zero-order release kinetics and had an average pH of 7.45. The formulation was stored at 4 ℃ and 25 ℃ and was assessed for vesicle size, entrapment efficiency, Zeta potential, colour, lamellarity, and PDI every 7 days for 4 weeks. The lead formulation stored at 4 ℃ was more stable than the formulation at 25 ℃ in terms of entrapment efficiency, PDI and vesicle size during the 4-week period. CPH loaded niosomes for transtympanic delivery in the treatment of otitis media were developed and optimized. The technology exhibits sustained release of CPH and has the potential for further development and optimization. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2022
- Full Text:
- Authors: Mhlanga, Asavela
- Date: 2022-04-06
- Subjects: Drug delivery systems , Liposomes , Ciprofloxacin , Quinolone antibacterial agents , Drug carriers (Pharmacy) , Drug stability , Lamellarity , Niosomes
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/290715 , vital:56777
- Description: Ciprofloxacin (CPH) is a broad-spectrum antibiotic used to treat bone, joint, and skin infections. It is commercially available as an extended-release tablet and as a cream dosage form. CPH is a bactericidal active pharmaceutical ingredient (API) of the fluoroquinolone drug class. It inhibits deoxyribonucleic acid (DNA) replication by inhibiting bacterial DNA topoisomerase and DNA gyrase enzymes. Common adverse effects include nausea, vomiting, unusual fatigue, pale skin, and may increase the risk of tendinitis, which could be a major concern. CPH is, according to the Biopharmaceutics Classification System (BCS), classified as a BCS class IV drug exhibiting low oral bioavailability, low solubility, and intestinal permeability. CPH was chosen as a good candidate for the study because of its stability in solutions, its low molecular weight (331.4 g/mol), and its moderate lipophilicity (log P = 0.28) [16]. The use of conventional ear drops in the ear is effective, avoids hepatic first metabolism and extensive protein binding and may reduce adverse effects as a low dose may be used to achieve a therapeutic effect. However, conventional ear drops and oral antibiotics have a long onset of action and have to be taken/applied in short intervals. For convenience and assurance of a long residence time in the ear, CPH may be delivered by using a niosomal formulation, a liquid at room temperature, to allow administration into the ear without the need to constantly apply the ear drops for long periods of time. A simple, rapid, precise, accurate, reproducible, and specific reversed-phase high-performance liquid chromatography (RP-HPLC) method using ultraviolet (UV) detection for the quantitation of CPH was developed and optimized using a central composite design (CCD). The method was validated using International Conference on Harmonisation (ICH) guidelines and was found to be linear, precise, accurate, and specific for the analysis of CPH. Since the method is specific, it was used to quantify CPH in commercial and experimental formulations and monitor CPH released during in-vitro release testing. The compatibility of CPH and potential excipients was investigated during preformulation studies using Fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) to identify and select suitable excipients for use during formulation development activities. No apparent interactions were evident between CPH, and the excipients tested. The probe sonication method was used to manufacture CPH loaded niosomes using different surfactants/surfactant combinations, and a combination of Tween® 80: sodium lauryl sulfate (SLS) was found to be the best composition in terms of both entrapment efficiency and Zeta potential. The limits for the independent input variables used for the manufacture included amplitude, sonication time, and amount of cholesterol were determined. Design of experiments (DOE) was used to design the study. The input variables investigated included amplitude, amount of cholesterol, and sonication time. The output or responses monitored included Zeta potential, vesicle size, polydispersity index (PDI), and entrapment efficiency. Non-ionic surfactant systems are predominantly stabilized by steric stabilization, and there is only a minor electrostatic element from adsorbed hydroxyl ions. With the inclusion of SLS it is to be expected that Zeta potential will be a contributing factor. DOE using Box-Behnken design (BBD) and response surface methodology (RSM) in addition to Artificial Neural Networks (ANN) were used for the optimization of the formulation. The optimized formulation had a composition of 1 g cholesterol, 1 g of Tween® 80, 1 g of SLS and was prepared at an amplitude of 11.294 % with a sonication time of 3.304 minutes. The formulation exhibited zero-order release kinetics and had an average pH of 7.45. The formulation was stored at 4 ℃ and 25 ℃ and was assessed for vesicle size, entrapment efficiency, Zeta potential, colour, lamellarity, and PDI every 7 days for 4 weeks. The lead formulation stored at 4 ℃ was more stable than the formulation at 25 ℃ in terms of entrapment efficiency, PDI and vesicle size during the 4-week period. CPH loaded niosomes for transtympanic delivery in the treatment of otitis media were developed and optimized. The technology exhibits sustained release of CPH and has the potential for further development and optimization. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2022
- Full Text:
A self-emulsifying delivery system loaded with efavirenz: The case for flax-seed oil
- Authors: Mazonde, Priveledge
- Date: 2021-10-29
- Subjects: Drug delivery systems , Linseed oil , Antiretroviral agents , HIV (Viruses) , Drug carriers (Pharmacy) , Solubility , High performance liquid chromatography , Efavirenz
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/192944 , vital:45283
- Description: The feasibility of incorporating efavirenz (EFV), an antiretroviral agent against HIV into a lipid-based self-emulsifying drug delivery system (SEDDS) containing vegetable oils was investigated. EFV has poor aqueous solubility and is classified under the Biopharmaceutical Classification System (BCS) as a class II compound with highly permeability, its aqueous solubility is less than 10 mg/ml and is defined as a practically insoluble compound with a consequent poor bioavailability of approximately 40%, and erratic dissolution behaviour. SEDDS formulations have been shown to improve the aqueous solubility and consequently the bioavailability of BCS II compounds such as EFV. EFV is a first line antiviral agent used in combination with other agents in antiretroviral therapy (ART). Among the number of NNRTIs approved for use in HIV treatment, EFV is one of the most commonly prescribed drug. Statistical methods and Design of Experiments (DoE) using Response Surface Methodology (RSM), specifically a Central Composite Design (CCD), were used to facilitate the development of a reversed-phase high performance liquid chromatographic (HPLC) method for the quantitation of EFV during formulation product and process development studies. A rapid, accurate, precise and sensitive HPLC method with ultraviolet (UV) detection was developed, optimised and validated for the in-vitro analysis of EFV in a total run time under 10 minutes for the elution of both EFV and loratidine which was used as the internal standard (IS). The method was then successfully applied to the determination of EFV in commercially available tablets. Excipient screening was undertaken using solubility studies and revealed that EFV had highest solubility in flaxseed oil in comparison to soybean, macadamia, grapeseed, sunflower and olive oils. The non-ionic Tween® 80 and Span® 20 were selected as surfactant and co-surfactant, respectively with ethanol co-solvent as they exhibited improved miscibility with co-solvent. Pre-formulation studies were undertaken to investigate the compatibility of the API with excipients and to identify a nano-emulsion region and other emulsion types using pseudoternary phase diagrams. The phase behaviour of crude cold pressed flaxseed oil with the selected non-ionic surfactants revealed an area within pseudo-ternary phase diagrams for different surfactant-mixtures formed gels/semisolid structures which can be exploited for other drug delivery strategies that require such properties. Fourier transform infrared spectroscopy (FT-IR), powder x-ray diffraction (XRD) and Raman spectroscopy were used to identify and assess the compatibility of EFV with chosen excipients. 2 A reduction in the peak intensity was observed for EFV when combined with each hydrophobic/lipid excipient evaluated revealing that there was a marked reduction in the crystallinity of the EFV. A decrease in crystallinity in comparison with the bulk API may indicate that EFV were amorphous or sequestered in a molecular dispersion and exhibited an increased solubility for the molecule. Flaxseed oil was used as the oil phase in studies for the optimization of surfactant mixtures undertaken using DoE, specifically a D-optimal mixtures design with the flaxseed oil content set at 10% m/m was performed. Solutions from the desired optimization function were produced based on desirability and five nanoemulsion formulations were produced and characterized in terms of in vitro release of efavirenz, drug loading capacity, Zeta Potential, droplet sizes and polydispersity index (PDI). Kinetically stable nanoemulsions containing 10% m/m flaxseed oil were successfully manufactured and assessed. Droplet sizes ranged between 156 and 225 nm, Zeta Potential between −24 and −41 mV and all formulations were found to be monodisperse with polydispersity indices ≤ 0.487. SEDDS formulations of EFV in nano-sized carriers were developed and optimised, in vitro drug release varied with varying amounts of ethanol in the formulation producing formulations that exhibited differently modulated drug in-vitro release profiles that may be further manipulated for better performance and therapeutic outcomes in terms of solubility and possibly bioavailability of EFV when delivered using SEDDS rather than using tablets which in turn may lead to better therapeutic outcomes for patients with HIV. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2021
- Full Text:
- Authors: Mazonde, Priveledge
- Date: 2021-10-29
- Subjects: Drug delivery systems , Linseed oil , Antiretroviral agents , HIV (Viruses) , Drug carriers (Pharmacy) , Solubility , High performance liquid chromatography , Efavirenz
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/192944 , vital:45283
- Description: The feasibility of incorporating efavirenz (EFV), an antiretroviral agent against HIV into a lipid-based self-emulsifying drug delivery system (SEDDS) containing vegetable oils was investigated. EFV has poor aqueous solubility and is classified under the Biopharmaceutical Classification System (BCS) as a class II compound with highly permeability, its aqueous solubility is less than 10 mg/ml and is defined as a practically insoluble compound with a consequent poor bioavailability of approximately 40%, and erratic dissolution behaviour. SEDDS formulations have been shown to improve the aqueous solubility and consequently the bioavailability of BCS II compounds such as EFV. EFV is a first line antiviral agent used in combination with other agents in antiretroviral therapy (ART). Among the number of NNRTIs approved for use in HIV treatment, EFV is one of the most commonly prescribed drug. Statistical methods and Design of Experiments (DoE) using Response Surface Methodology (RSM), specifically a Central Composite Design (CCD), were used to facilitate the development of a reversed-phase high performance liquid chromatographic (HPLC) method for the quantitation of EFV during formulation product and process development studies. A rapid, accurate, precise and sensitive HPLC method with ultraviolet (UV) detection was developed, optimised and validated for the in-vitro analysis of EFV in a total run time under 10 minutes for the elution of both EFV and loratidine which was used as the internal standard (IS). The method was then successfully applied to the determination of EFV in commercially available tablets. Excipient screening was undertaken using solubility studies and revealed that EFV had highest solubility in flaxseed oil in comparison to soybean, macadamia, grapeseed, sunflower and olive oils. The non-ionic Tween® 80 and Span® 20 were selected as surfactant and co-surfactant, respectively with ethanol co-solvent as they exhibited improved miscibility with co-solvent. Pre-formulation studies were undertaken to investigate the compatibility of the API with excipients and to identify a nano-emulsion region and other emulsion types using pseudoternary phase diagrams. The phase behaviour of crude cold pressed flaxseed oil with the selected non-ionic surfactants revealed an area within pseudo-ternary phase diagrams for different surfactant-mixtures formed gels/semisolid structures which can be exploited for other drug delivery strategies that require such properties. Fourier transform infrared spectroscopy (FT-IR), powder x-ray diffraction (XRD) and Raman spectroscopy were used to identify and assess the compatibility of EFV with chosen excipients. 2 A reduction in the peak intensity was observed for EFV when combined with each hydrophobic/lipid excipient evaluated revealing that there was a marked reduction in the crystallinity of the EFV. A decrease in crystallinity in comparison with the bulk API may indicate that EFV were amorphous or sequestered in a molecular dispersion and exhibited an increased solubility for the molecule. Flaxseed oil was used as the oil phase in studies for the optimization of surfactant mixtures undertaken using DoE, specifically a D-optimal mixtures design with the flaxseed oil content set at 10% m/m was performed. Solutions from the desired optimization function were produced based on desirability and five nanoemulsion formulations were produced and characterized in terms of in vitro release of efavirenz, drug loading capacity, Zeta Potential, droplet sizes and polydispersity index (PDI). Kinetically stable nanoemulsions containing 10% m/m flaxseed oil were successfully manufactured and assessed. Droplet sizes ranged between 156 and 225 nm, Zeta Potential between −24 and −41 mV and all formulations were found to be monodisperse with polydispersity indices ≤ 0.487. SEDDS formulations of EFV in nano-sized carriers were developed and optimised, in vitro drug release varied with varying amounts of ethanol in the formulation producing formulations that exhibited differently modulated drug in-vitro release profiles that may be further manipulated for better performance and therapeutic outcomes in terms of solubility and possibly bioavailability of EFV when delivered using SEDDS rather than using tablets which in turn may lead to better therapeutic outcomes for patients with HIV. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2021
- Full Text:
- «
- ‹
- 1
- ›
- »