Combined and additive effects of assembly tasks and constrained body postures
- Authors: Skelton, Sarah Anne
- Date: 2007
- Subjects: Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5107 , http://hdl.handle.net/10962/d1005185 , Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Description: Despite extensive research into musculoskeletal disorders (MSDs) they continue to plague workers. Manual materials handling (MMH), in particular the concurrence of load manipulation and awkward body posture, has been identified as a key factor in the onset of MSDs. Only a few studies have looked at the interaction between manipulation tasks and working posture during assembly tasks and as a result their relationship has not been widely explored. Assessing the stresses resulting from individual task factors and body posture in isolation and adding them together may be too simplified to estimate an overall risk profile, since this does not take into account that there may be a non-linear interaction in strain responses when manipulation task and body posture interact. Therefore, the present study investigated biophysical, physiological and psychophysical responses to combined tasks, rather than individual tasks of body posture and manipulative tasks. The objective of the research was to establish the interactive effects of constrained body postures and manipulative tasks and to identify whether a cumulative or compensatory reaction occurs during this interaction. Nine conditions were assessed in a laboratory setting, which included combinations of three working postures (standing, sitting and stooping) and three assembly tasks (torque wrenching, precision and no task). Thirty-six subjects were required to complete all nine conditions, with each condition lasting ninety seconds. Muscle activity was recorded for seven muscles from the upper extremity, trunk and lower extremity regions and was complemented by physiological (heart rate, tidal volume, minute ventilation, oxygen consumption, energy expenditure and breathing frequency) and psychophysical (body discomfort) data. At the completion of all nine conditions subjects completed a retrospective psychophysical rating questionnaire pertaining to discomfort felt during the conditions. Responses obtained for the different task and posture combinations revealed compensatory reactions (additive > combined) for most of the conditions assessed for the biomechanical and physiological responses. In the majority of cases for muscle activity, no significant differences were found between the combined and the additive effects (p < 0.05), while for the physiological responses there were mostly significant differences observed. Psychophysical responses indicated that there was a significant difference overall between the additive and combined effects. The results of this study demonstrate that in order to identify risk areas, manipulation tasks and constrained working postures may be considered either in isolation and added together (additive) or as a combined task, since there were very few significant differences observed between these two effects. Further studies are required, however, to provide conclusive evidence.
- Full Text:
- Date Issued: 2007
- Authors: Skelton, Sarah Anne
- Date: 2007
- Subjects: Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5107 , http://hdl.handle.net/10962/d1005185 , Musculoskeletal system -- Diseases , Human engineering , Posture , Posture disorders , Work -- Physiological aspects , Occupational diseases , Manual work , Job stress
- Description: Despite extensive research into musculoskeletal disorders (MSDs) they continue to plague workers. Manual materials handling (MMH), in particular the concurrence of load manipulation and awkward body posture, has been identified as a key factor in the onset of MSDs. Only a few studies have looked at the interaction between manipulation tasks and working posture during assembly tasks and as a result their relationship has not been widely explored. Assessing the stresses resulting from individual task factors and body posture in isolation and adding them together may be too simplified to estimate an overall risk profile, since this does not take into account that there may be a non-linear interaction in strain responses when manipulation task and body posture interact. Therefore, the present study investigated biophysical, physiological and psychophysical responses to combined tasks, rather than individual tasks of body posture and manipulative tasks. The objective of the research was to establish the interactive effects of constrained body postures and manipulative tasks and to identify whether a cumulative or compensatory reaction occurs during this interaction. Nine conditions were assessed in a laboratory setting, which included combinations of three working postures (standing, sitting and stooping) and three assembly tasks (torque wrenching, precision and no task). Thirty-six subjects were required to complete all nine conditions, with each condition lasting ninety seconds. Muscle activity was recorded for seven muscles from the upper extremity, trunk and lower extremity regions and was complemented by physiological (heart rate, tidal volume, minute ventilation, oxygen consumption, energy expenditure and breathing frequency) and psychophysical (body discomfort) data. At the completion of all nine conditions subjects completed a retrospective psychophysical rating questionnaire pertaining to discomfort felt during the conditions. Responses obtained for the different task and posture combinations revealed compensatory reactions (additive > combined) for most of the conditions assessed for the biomechanical and physiological responses. In the majority of cases for muscle activity, no significant differences were found between the combined and the additive effects (p < 0.05), while for the physiological responses there were mostly significant differences observed. Psychophysical responses indicated that there was a significant difference overall between the additive and combined effects. The results of this study demonstrate that in order to identify risk areas, manipulation tasks and constrained working postures may be considered either in isolation and added together (additive) or as a combined task, since there were very few significant differences observed between these two effects. Further studies are required, however, to provide conclusive evidence.
- Full Text:
- Date Issued: 2007
Three dimensional kinetic analysis of asymmetrical lifting
- Authors: Li, Jian-Chuan
- Date: 1996
- Subjects: Lifting and carrying , Human engineering , Materials handling , Manual work
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5174 , http://hdl.handle.net/10962/d1018240
- Description: Manual lifting is dynamic in nature and involves asymmetrical loading of the human body. This study investigated kinematic and kinetic characteristics of asymmetrical lifting in three dimensions, and then constructed a 3-D biomechanical force model of the lower back which is capable of quantifying torsional stress on the human spine. Eleven healthy adult male manual workers were recruited as subjects and lifted a 1 Okg load placed at the sagittal plane (0°) and at 30°, 60° and 90° lateral planes to the right, from 150mm and 500mm initial lift heights, respectively, to an 800mm high bench in the sagittal plane. Subjects' spinal motions and the trajectorial movements of the load in three-dimensional space were monitored simultaneously by a Lumbar Motion Monitor and a V-scope Motion Analyzer. Generally, the spinal motion factors increased as a function of increasing task asymmetry and differed (p < 0.05) between the lower (150mm) and higher (500mm) levels in the sagittal plane. In all asymmetrical conditions the motion factors showed a dramatic increase at the 500mm level compared to the increase at the 150mm level. The rates of increase in the horizontal and frontal planes were greater than those in the sagittal plane. Task asymmetry had a significant effect on the spinal kinematic parameters in the frontal plane at the two lift heights, and only at the high level (500mm) in the horizontal plane, with exception of average acceleration . Initial lift height exerted a significant effect on peak velocity and acceleration in both frontal and horizontal planes and on range of motion in the horizontal plane. Kinetic characteristics of the object being lifted in three-dimensions increased with an increase in task asymmetry. The increase was more dramatic in the lateral direction in the horizontal plane. However, motion factors in the vertical direction dominated the full range of the lift, irrespective of task asymmetry and lift height. The kinetic measures differed (p < 0.05) between the lower ( 1 50mm) and the higher (500mm) levels in the vertical direction except for average force. Task asymmetry had a significant effect on dynamic measures in the anterior-posterior direction. Both task asymmetry and lift height had a significant effect on dynamic motion factors in the lateral direction. From insights gained in the empirical study a three-dimensional biomechanical force model of the lower back was constructed based on a mechanism of muscle force re-orientation in the lumbar region. Acknowledging that the lower back is designed to be able to rotate around its longitudinal axis, the proposed model accounts for compression and shear forces and a torsional moment. The model has similar predictability to Schultz and Andersson's (1981) model when the human trunk exerts only a flexion-extension moment in the sagittal plane, but additionally predicts dramatic increases in shear forces, oblique muscle forces and torsional moment under asymmetrical lifting conditions which the Schultz-Andersson model does not. The increase rates in these forces and moment are not linearly related over task asymmetric angle.
- Full Text:
- Date Issued: 1996
- Authors: Li, Jian-Chuan
- Date: 1996
- Subjects: Lifting and carrying , Human engineering , Materials handling , Manual work
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5174 , http://hdl.handle.net/10962/d1018240
- Description: Manual lifting is dynamic in nature and involves asymmetrical loading of the human body. This study investigated kinematic and kinetic characteristics of asymmetrical lifting in three dimensions, and then constructed a 3-D biomechanical force model of the lower back which is capable of quantifying torsional stress on the human spine. Eleven healthy adult male manual workers were recruited as subjects and lifted a 1 Okg load placed at the sagittal plane (0°) and at 30°, 60° and 90° lateral planes to the right, from 150mm and 500mm initial lift heights, respectively, to an 800mm high bench in the sagittal plane. Subjects' spinal motions and the trajectorial movements of the load in three-dimensional space were monitored simultaneously by a Lumbar Motion Monitor and a V-scope Motion Analyzer. Generally, the spinal motion factors increased as a function of increasing task asymmetry and differed (p < 0.05) between the lower (150mm) and higher (500mm) levels in the sagittal plane. In all asymmetrical conditions the motion factors showed a dramatic increase at the 500mm level compared to the increase at the 150mm level. The rates of increase in the horizontal and frontal planes were greater than those in the sagittal plane. Task asymmetry had a significant effect on the spinal kinematic parameters in the frontal plane at the two lift heights, and only at the high level (500mm) in the horizontal plane, with exception of average acceleration . Initial lift height exerted a significant effect on peak velocity and acceleration in both frontal and horizontal planes and on range of motion in the horizontal plane. Kinetic characteristics of the object being lifted in three-dimensions increased with an increase in task asymmetry. The increase was more dramatic in the lateral direction in the horizontal plane. However, motion factors in the vertical direction dominated the full range of the lift, irrespective of task asymmetry and lift height. The kinetic measures differed (p < 0.05) between the lower ( 1 50mm) and the higher (500mm) levels in the vertical direction except for average force. Task asymmetry had a significant effect on dynamic measures in the anterior-posterior direction. Both task asymmetry and lift height had a significant effect on dynamic motion factors in the lateral direction. From insights gained in the empirical study a three-dimensional biomechanical force model of the lower back was constructed based on a mechanism of muscle force re-orientation in the lumbar region. Acknowledging that the lower back is designed to be able to rotate around its longitudinal axis, the proposed model accounts for compression and shear forces and a torsional moment. The model has similar predictability to Schultz and Andersson's (1981) model when the human trunk exerts only a flexion-extension moment in the sagittal plane, but additionally predicts dramatic increases in shear forces, oblique muscle forces and torsional moment under asymmetrical lifting conditions which the Schultz-Andersson model does not. The increase rates in these forces and moment are not linearly related over task asymmetric angle.
- Full Text:
- Date Issued: 1996
- «
- ‹
- 1
- ›
- »