Electrochemical studies of metal-ligand interactions and of metal binding proteins
- Authors: Limson, Janice Leigh
- Date: 1999
- Subjects: Electrochemical analysis , Metals -- Analysis , Proteins -- Analysis , Electrochemistry -- Technique
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4551 , http://hdl.handle.net/10962/d1018239
- Description: Electrochemical methods were researched for the analysis of metals, proteins and the identification of metal binding proteins. Adsorptive cathodic stripping voltamrnetry for metal analysis combines the inherent sensitivity of electrochemical techniques with the specificity of ligands for the nonfaradaic preconcentration of analytes at the electrode. The utility of catechol, resorcinol, 4-methylcatechol and 4-t-butylcatechol as ligands was explored for the sensitive analysis of copper, bismuth, cadmium and lead on a mercury film glassy carbon electrode. Metal complexes of lead, copper and bismuth with resorcinol showed the largest increase in current with increase in metal concentration, whereas complexes of these metals with 4-t-butylcatechol showed the lowest current response. Cadmium showed the highest current responses with 4-methylcatechol. The four metals could be determined simultaneously in the presence of resorcinol, although considerable interference was observed between bismuth and copper. The electroanalysis of cysteine and cysteine containing proteins at carbon electrodes are impaired by slow electron transfer rates at carbon electrodes, exhibiting high overpotentials, greater than 1 V vs Ag! Agel. Metallophthalocyanines have been shown to promote the electrocatalysis of cysteine at lowered potentials. Chemical modification of electrodes with appropriate modifiers is a means of incorporating specificity into electroanalysis, with applications in electrocatalysis. A glassy carbon electrode was modified by electrodeposition of cobalt (II) tetrasulphophthalocyanine [Co(II)TSPct to produce a chemically modified glassy carbon electrode (CMGCE). The CoTSPc-CMGCE catalysed the oxidation of cysteine in the pH range 1 to 10. The significance of this electrode is an application for analysis of proteins at biological pH's. A biscyanoruthenium(II) phthalocyanine CMGCE catalysed the oxidation of cysteine at 0.43 V vs Ag/AgCl a significant lowering in the overpotential for the oxidation of cysteine. Metallothionein, a metal binding protein, is believed to be involved in metal homeostasis and detoxification in the peripheral organs of living systems. A method for the quantitative determination of this protein utilising its high cysteine content was presented. At pH 8.4 Tris-HCl buffer, and using a CoTSPc-CMGCE modified by electrodeposition of the modifier, the anodic peaks for the oxidation of metallothionein was observed at 0. 90 V vs Ag/ AgCI. Ferredoxin is a simple iron-sulphur protein. One tenth of its residues are cysteine. Ferredoxin is involved in simple electron transfer processes during photosynthesis and respiration. Electrochemical studies of spinach ferredoxin were conducted at a CoTSPc-CMGCE. Anodic currents for the oxidation of the cysteine fragment of ferredoxin was observed at 0.85 V vs Ag/AgCl in HEPES buffer at pH 7.4, representing a new method for analysis of this protein. Voltammetric studies of its ferric/ferrous transition have shown quasi-reversible waves atE~ -0.62 V vs Ag/AgCl only in the presence of promoters. At a CoTSPc-CMGCE, a cathodic wave attributed to the reduction of Fe(III)/Fe(II) was observed at Epc -0.34 V vs Ag/AgCl. This represents an alternative method for voltammetric studies of the ferric/ferrous transition at significantly lowered potentials. Melatonin, a pineal gland hormone functions m setting and entraining circadian rhythms and in neuroprotection as a free radical scavenger and general antioxidant. Using adsorptive cathodic stripping voltammetry, the binding affinities of melatonin, serotonin and tryptophan for metals, were measured. The results showed that the following metal complexes were formed: aluminium with melatonin, serotonin and tryptophan; cadmium with melatonin and tryptophan; copper with melatonin and serotonin; iron (III) with melatonin and serotonin; lead with melatonin, tryptophan and serotonin, zinc with melatonin and tryptophan and iron (II) with tryptophan. The studies suggest a further role for melatonin in the reduction of free radical generation and in metal detoxification and may explain the accumulation of aluminium in Alzheimer's disease.
- Full Text:
- Date Issued: 1999
- Authors: Limson, Janice Leigh
- Date: 1999
- Subjects: Electrochemical analysis , Metals -- Analysis , Proteins -- Analysis , Electrochemistry -- Technique
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4551 , http://hdl.handle.net/10962/d1018239
- Description: Electrochemical methods were researched for the analysis of metals, proteins and the identification of metal binding proteins. Adsorptive cathodic stripping voltamrnetry for metal analysis combines the inherent sensitivity of electrochemical techniques with the specificity of ligands for the nonfaradaic preconcentration of analytes at the electrode. The utility of catechol, resorcinol, 4-methylcatechol and 4-t-butylcatechol as ligands was explored for the sensitive analysis of copper, bismuth, cadmium and lead on a mercury film glassy carbon electrode. Metal complexes of lead, copper and bismuth with resorcinol showed the largest increase in current with increase in metal concentration, whereas complexes of these metals with 4-t-butylcatechol showed the lowest current response. Cadmium showed the highest current responses with 4-methylcatechol. The four metals could be determined simultaneously in the presence of resorcinol, although considerable interference was observed between bismuth and copper. The electroanalysis of cysteine and cysteine containing proteins at carbon electrodes are impaired by slow electron transfer rates at carbon electrodes, exhibiting high overpotentials, greater than 1 V vs Ag! Agel. Metallophthalocyanines have been shown to promote the electrocatalysis of cysteine at lowered potentials. Chemical modification of electrodes with appropriate modifiers is a means of incorporating specificity into electroanalysis, with applications in electrocatalysis. A glassy carbon electrode was modified by electrodeposition of cobalt (II) tetrasulphophthalocyanine [Co(II)TSPct to produce a chemically modified glassy carbon electrode (CMGCE). The CoTSPc-CMGCE catalysed the oxidation of cysteine in the pH range 1 to 10. The significance of this electrode is an application for analysis of proteins at biological pH's. A biscyanoruthenium(II) phthalocyanine CMGCE catalysed the oxidation of cysteine at 0.43 V vs Ag/AgCl a significant lowering in the overpotential for the oxidation of cysteine. Metallothionein, a metal binding protein, is believed to be involved in metal homeostasis and detoxification in the peripheral organs of living systems. A method for the quantitative determination of this protein utilising its high cysteine content was presented. At pH 8.4 Tris-HCl buffer, and using a CoTSPc-CMGCE modified by electrodeposition of the modifier, the anodic peaks for the oxidation of metallothionein was observed at 0. 90 V vs Ag/ AgCI. Ferredoxin is a simple iron-sulphur protein. One tenth of its residues are cysteine. Ferredoxin is involved in simple electron transfer processes during photosynthesis and respiration. Electrochemical studies of spinach ferredoxin were conducted at a CoTSPc-CMGCE. Anodic currents for the oxidation of the cysteine fragment of ferredoxin was observed at 0.85 V vs Ag/AgCl in HEPES buffer at pH 7.4, representing a new method for analysis of this protein. Voltammetric studies of its ferric/ferrous transition have shown quasi-reversible waves atE~ -0.62 V vs Ag/AgCl only in the presence of promoters. At a CoTSPc-CMGCE, a cathodic wave attributed to the reduction of Fe(III)/Fe(II) was observed at Epc -0.34 V vs Ag/AgCl. This represents an alternative method for voltammetric studies of the ferric/ferrous transition at significantly lowered potentials. Melatonin, a pineal gland hormone functions m setting and entraining circadian rhythms and in neuroprotection as a free radical scavenger and general antioxidant. Using adsorptive cathodic stripping voltammetry, the binding affinities of melatonin, serotonin and tryptophan for metals, were measured. The results showed that the following metal complexes were formed: aluminium with melatonin, serotonin and tryptophan; cadmium with melatonin and tryptophan; copper with melatonin and serotonin; iron (III) with melatonin and serotonin; lead with melatonin, tryptophan and serotonin, zinc with melatonin and tryptophan and iron (II) with tryptophan. The studies suggest a further role for melatonin in the reduction of free radical generation and in metal detoxification and may explain the accumulation of aluminium in Alzheimer's disease.
- Full Text:
- Date Issued: 1999
The study of hydroxyoximes and hydroxamic acids supported on macroporous resins and their use in the rapid seperation of metals
- Authors: Hemmes, Marlene
- Date: 1979
- Subjects: Chromatographic analysis , Separation (Technology) , Metal ions , Solvent extraction , Extraction (Chemistry) , Oximes , Metals -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4453 , http://hdl.handle.net/10962/d1009512
- Description: Introduction: The macroporous Amberlite XAD resins were coated with LIX-64N and examined for the rate of uptake of copper . XAD-7 was by far the best support and gave a satisfactory rate of uptake up to loadings of 60% (w/w). The specific surface area of XAD-7 was measured by the adsorption of methylene blue from aqueous solution. The area of the wetted resin was five times less than that of the dry resin. LIX-65N was purified and the anti isomer characterised using spectroscopic techniques . The rate of uptake of copper was not improved by use of purified LIX-65N or by addition of LIX-63. XAD-7 coated with LIX-65N was used in columns. Elution curves for copper showed negligible tailing, and rapid separations of copper from iron (111), nickel, cobalt and magnesium by selective absorption were achieved. Copper was concentrated from very dilute solution at a flow rate of 50 ml min -1 ,and a 99% recovery was obtained. The method was applied to the rapid determination of copper in brass and bronze. A series of long-chain hydroxamic acids were synthesised and tested for suitability as stationary phase on XAD-7. Oleohydroxamic acid and naphthenohydroxamic acid were the most promising. The r ate of uptake of copper was reduced by the use of nonylphenol or amyl alcohol as a diluent. The capacities for copper of the hydroxamic acids were less when supported on XAD-7 than when used as liquid ionexchangers. The distribution coefficients of cobalt, nickel, zinc, lead, vanadium, uranium, iron (111) and copper were measured as a function of pH. XAD-7 coated with oleohydroxamic acid was used in columns for the rapid separation of iron (111) from copper and of copper from nickel, cobalt, lead and zinc. Copper was concentrated from very dilute solution at a flow rate of 45 ml min -1 and a 100,8% recovery was obtained. Copper was successfully separated from nickel by selective elution. The elution curves obtained show negligible tailing. The resin loaded with oleohydroxamic acid lost capacity due to chemical instability. Naphthenohydroxamic acid supported on XAD-7 was not suitable for use in columns, because it was physically unstable.
- Full Text:
- Date Issued: 1979
- Authors: Hemmes, Marlene
- Date: 1979
- Subjects: Chromatographic analysis , Separation (Technology) , Metal ions , Solvent extraction , Extraction (Chemistry) , Oximes , Metals -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4453 , http://hdl.handle.net/10962/d1009512
- Description: Introduction: The macroporous Amberlite XAD resins were coated with LIX-64N and examined for the rate of uptake of copper . XAD-7 was by far the best support and gave a satisfactory rate of uptake up to loadings of 60% (w/w). The specific surface area of XAD-7 was measured by the adsorption of methylene blue from aqueous solution. The area of the wetted resin was five times less than that of the dry resin. LIX-65N was purified and the anti isomer characterised using spectroscopic techniques . The rate of uptake of copper was not improved by use of purified LIX-65N or by addition of LIX-63. XAD-7 coated with LIX-65N was used in columns. Elution curves for copper showed negligible tailing, and rapid separations of copper from iron (111), nickel, cobalt and magnesium by selective absorption were achieved. Copper was concentrated from very dilute solution at a flow rate of 50 ml min -1 ,and a 99% recovery was obtained. The method was applied to the rapid determination of copper in brass and bronze. A series of long-chain hydroxamic acids were synthesised and tested for suitability as stationary phase on XAD-7. Oleohydroxamic acid and naphthenohydroxamic acid were the most promising. The r ate of uptake of copper was reduced by the use of nonylphenol or amyl alcohol as a diluent. The capacities for copper of the hydroxamic acids were less when supported on XAD-7 than when used as liquid ionexchangers. The distribution coefficients of cobalt, nickel, zinc, lead, vanadium, uranium, iron (111) and copper were measured as a function of pH. XAD-7 coated with oleohydroxamic acid was used in columns for the rapid separation of iron (111) from copper and of copper from nickel, cobalt, lead and zinc. Copper was concentrated from very dilute solution at a flow rate of 45 ml min -1 and a 100,8% recovery was obtained. Copper was successfully separated from nickel by selective elution. The elution curves obtained show negligible tailing. The resin loaded with oleohydroxamic acid lost capacity due to chemical instability. Naphthenohydroxamic acid supported on XAD-7 was not suitable for use in columns, because it was physically unstable.
- Full Text:
- Date Issued: 1979
- «
- ‹
- 1
- ›
- »