An ion imprinted polymer for the determination of Ni (II) ions from mine tailing samples
- Authors: Rammika, Modise
- Date: 2011
- Subjects: Imprinted polymers , Metal ions , Polymerization , Mineral industries -- Waste disposal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4323 , http://hdl.handle.net/10962/d1004981 , Imprinted polymers , Metal ions , Polymerization , Mineral industries -- Waste disposal
- Description: A Ni(II)-dimethylglyoxime ion imprinted polymer {Ni(II)-DMG IIP} was synthesized by the trapping method using the bulk polymerisation format. The structures of the imprinted and non-imprinted polymer were evaluated by infrared spectroscopy and the morphology was observed by scanning electron microscopy. The Ni(II)-DMG IIP was optimised for pH, mass, time and by the uniform design experimental method for the molar ratios of monomer to crosslinker to porogen and template to ligands as well as keeping these parameters constant and varying the quantities of initiator, 2,2'-azobisisobutyronitrile (AIBN). The optimum pH was 8.5, optimum mass was 50 mg, optimum time was 1 min and the optimum molar ratios of crosslinker to monomer, monomer to template and nickel(II) sulfate hexahydrate (NiSO₄.6H₂O) to 4-vinylpyridine to dimethylglyoxime were found to be 3.3:1.0, 0.6:1.0 and 1.0:0.6:3.6 respectively with 30 mg and 8 mL as the optimum amounts of initiator and porogen respectively. Through this optimisation, recovery of Ni(II) was increased from 98 to 100%. Selectivity of the ion imprinted polymer was evaluated by analysing, using an inductively coupled plasma-optical emission spectrometer, for Ni(II) ions that were spiked with varying concentrations of Co(II), Cu(II), Zn(II), Pd(II), Fe(II), Ca(II), Mg(II), Na(I) and K(I) in aqueous samples. Selectivity studies also confirmed that the ion imprinted polymer had very good selectivity characterised by % RSD of less than 5 %. Co(II) was the only ion found to slightly interfere with the determination of Ni(II). The limits of detection and quantification were found to be 3x10⁻⁴ μg/mL and 9x10⁻⁴ μg/mL respectively. The method was evaluated by a custom solution of ground water certified reference material (SEP-3) and sandy soil reference material (BCR-142R) and the concentrations of Ni(II) obtained were not significantly different to the certified ones. The Ni(II)-DMG IIP was then evaluated in aqueous and soil samples where recoveries of 93 to 100% and 98 to 99% respectively were obtained with enrichment factors ranging from 2 to 18 in aqueous and 27 to 40 in soil samples. Finally, the Ni(II)-DMG IIP was used to analyse mine tailings samples and Ni(II) recovery of 99% was obtained with an enrichment factor of 2.
- Full Text:
- Date Issued: 2011
- Authors: Rammika, Modise
- Date: 2011
- Subjects: Imprinted polymers , Metal ions , Polymerization , Mineral industries -- Waste disposal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4323 , http://hdl.handle.net/10962/d1004981 , Imprinted polymers , Metal ions , Polymerization , Mineral industries -- Waste disposal
- Description: A Ni(II)-dimethylglyoxime ion imprinted polymer {Ni(II)-DMG IIP} was synthesized by the trapping method using the bulk polymerisation format. The structures of the imprinted and non-imprinted polymer were evaluated by infrared spectroscopy and the morphology was observed by scanning electron microscopy. The Ni(II)-DMG IIP was optimised for pH, mass, time and by the uniform design experimental method for the molar ratios of monomer to crosslinker to porogen and template to ligands as well as keeping these parameters constant and varying the quantities of initiator, 2,2'-azobisisobutyronitrile (AIBN). The optimum pH was 8.5, optimum mass was 50 mg, optimum time was 1 min and the optimum molar ratios of crosslinker to monomer, monomer to template and nickel(II) sulfate hexahydrate (NiSO₄.6H₂O) to 4-vinylpyridine to dimethylglyoxime were found to be 3.3:1.0, 0.6:1.0 and 1.0:0.6:3.6 respectively with 30 mg and 8 mL as the optimum amounts of initiator and porogen respectively. Through this optimisation, recovery of Ni(II) was increased from 98 to 100%. Selectivity of the ion imprinted polymer was evaluated by analysing, using an inductively coupled plasma-optical emission spectrometer, for Ni(II) ions that were spiked with varying concentrations of Co(II), Cu(II), Zn(II), Pd(II), Fe(II), Ca(II), Mg(II), Na(I) and K(I) in aqueous samples. Selectivity studies also confirmed that the ion imprinted polymer had very good selectivity characterised by % RSD of less than 5 %. Co(II) was the only ion found to slightly interfere with the determination of Ni(II). The limits of detection and quantification were found to be 3x10⁻⁴ μg/mL and 9x10⁻⁴ μg/mL respectively. The method was evaluated by a custom solution of ground water certified reference material (SEP-3) and sandy soil reference material (BCR-142R) and the concentrations of Ni(II) obtained were not significantly different to the certified ones. The Ni(II)-DMG IIP was then evaluated in aqueous and soil samples where recoveries of 93 to 100% and 98 to 99% respectively were obtained with enrichment factors ranging from 2 to 18 in aqueous and 27 to 40 in soil samples. Finally, the Ni(II)-DMG IIP was used to analyse mine tailings samples and Ni(II) recovery of 99% was obtained with an enrichment factor of 2.
- Full Text:
- Date Issued: 2011
Pollution caused by mine dumps and its control
- Chikusa, Chimwemwe Mainsfield
- Authors: Chikusa, Chimwemwe Mainsfield
- Date: 1994
- Subjects: Pollution , Pollution -- Law and legislation -- South Africa , Mineral industries -- Waste disposal , Slimes (Mining)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4991 , http://hdl.handle.net/10962/d1005603 , Pollution , Pollution -- Law and legislation -- South Africa , Mineral industries -- Waste disposal , Slimes (Mining)
- Description: All mine dumps are a point source of either physical, chemical or both forms of pollution. Physical pollution includes the physical site coverage of the dump, slumping of parts of the dams and dust that may originate from it (air pollution). Chemical pollution from, or related to the mine dumps include the dominant acid drainage (which contains heavy metals), radioactivity, electromagnetic radiation, noise and chemicals released from the mineral processing stage. In one way or the other, exposure to these pollution forms is detrimental to the human health and his environment. It is this fact that urges the public, government and the responsible mining companies to find ways of monitoring the pollution and stopping it, preferably at the source. Where it can not be stopped, techniques of reducing it, or containing it have been, and are still being developed. Personal protection is the priority. Pollution exposure to the general public is minimised as much as possible. Pollution control techniques that employ less expensive, natural, self-sustaining elements suitable for the environment such as wetlands and vegetation are recommended. The artificial short term and often expensive alternatives are of secondary priority. However, choice of which technique to use is based on the merit of each problem, knowing that chemicals act faster but are effective for a short period as compared to the natural systems. Pollution management is the critical part of the whole process. This involves decision making on courses of action and financial allocation on the part of both the polluter and the monitoring department/agent. The ability to effectively manage pollution programmes is achieved these days with the aid of computers. It is emphasised that pollution control should be handled in an integrated, multi-disciplinary approach manner. This is because pollution is a question of life and death, hence every individual remains accountable to it. Keeping the public and the concerned parties educated, informed and welcoming their concerns on the environmental issues related to the mine dumps generated in a mining venture is essential in the modern days of environmental public awareness, or otherwise face the public lath.
- Full Text:
- Date Issued: 1994
- Authors: Chikusa, Chimwemwe Mainsfield
- Date: 1994
- Subjects: Pollution , Pollution -- Law and legislation -- South Africa , Mineral industries -- Waste disposal , Slimes (Mining)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4991 , http://hdl.handle.net/10962/d1005603 , Pollution , Pollution -- Law and legislation -- South Africa , Mineral industries -- Waste disposal , Slimes (Mining)
- Description: All mine dumps are a point source of either physical, chemical or both forms of pollution. Physical pollution includes the physical site coverage of the dump, slumping of parts of the dams and dust that may originate from it (air pollution). Chemical pollution from, or related to the mine dumps include the dominant acid drainage (which contains heavy metals), radioactivity, electromagnetic radiation, noise and chemicals released from the mineral processing stage. In one way or the other, exposure to these pollution forms is detrimental to the human health and his environment. It is this fact that urges the public, government and the responsible mining companies to find ways of monitoring the pollution and stopping it, preferably at the source. Where it can not be stopped, techniques of reducing it, or containing it have been, and are still being developed. Personal protection is the priority. Pollution exposure to the general public is minimised as much as possible. Pollution control techniques that employ less expensive, natural, self-sustaining elements suitable for the environment such as wetlands and vegetation are recommended. The artificial short term and often expensive alternatives are of secondary priority. However, choice of which technique to use is based on the merit of each problem, knowing that chemicals act faster but are effective for a short period as compared to the natural systems. Pollution management is the critical part of the whole process. This involves decision making on courses of action and financial allocation on the part of both the polluter and the monitoring department/agent. The ability to effectively manage pollution programmes is achieved these days with the aid of computers. It is emphasised that pollution control should be handled in an integrated, multi-disciplinary approach manner. This is because pollution is a question of life and death, hence every individual remains accountable to it. Keeping the public and the concerned parties educated, informed and welcoming their concerns on the environmental issues related to the mine dumps generated in a mining venture is essential in the modern days of environmental public awareness, or otherwise face the public lath.
- Full Text:
- Date Issued: 1994
- «
- ‹
- 1
- ›
- »