The design and synthesis of novel fluorescent coumarin-based derivatives as chemosensory for the application of toxic metal ion detection
- Authors: Schoeman,Stiaan
- Date: 2023-04
- Subjects: Fluorescent polymers -- South Africa , Polymerization , Chemosensory
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/61270 , vital:69851
- Description: The rise of humankind has caused pollution, increasing damage to the environment. The actions of humans over hundreds of years have led to an increase in the release of heavy metal cations in concentrations that are toxic to plants, animals and humans. These toxic metals can find their way into humans’ diets through water sources or bioaccumulation in plants and animals such as fish. Heavy metals such as lead and mercury are known to cause serious health issues when consumed, affecting the functioning of the circulatory and nervous systems and causing developmental disorders. Other metal cations, such as iron and copper, can be found in the human body. However, detrimental health issues can occur when normal concentrations are disturbed (either too high or too low). Iron, for example, can be toxic if in excess in the human body, causing damage to the liver and heart and can cause neuroinflammation and Alzheimer’s disease. Many methods have been employed to detect and measure the concentrations of toxic metal cations. However, these methods are performed in a laboratory and need skilled operators using expensive equipment. This results in long and tedious sample collection, long feedback time and costly analysis. Chemosensors have been researched and proposed as a cost-effective, on-site, real-time alternative for use as metal detectors. Chemosensory can selectively detect specific metal cations and can be sensitive up to the nanomolar range. Various chemosensors have been synthesised and screened for their colourimetric and fluorometric abilities. Colourimetric chemosensors can be used to visually detect cationic and anionic analytes, whereas fluorometric chemosensors are used to detect anions using their emission properties which handheld devices can measure. , Thesis (PhD) -- Faculty of Science, School of Biomolecular and Chemical Sciences, 2023
- Full Text:
- Date Issued: 2023-04
- Authors: Schoeman,Stiaan
- Date: 2023-04
- Subjects: Fluorescent polymers -- South Africa , Polymerization , Chemosensory
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10948/61270 , vital:69851
- Description: The rise of humankind has caused pollution, increasing damage to the environment. The actions of humans over hundreds of years have led to an increase in the release of heavy metal cations in concentrations that are toxic to plants, animals and humans. These toxic metals can find their way into humans’ diets through water sources or bioaccumulation in plants and animals such as fish. Heavy metals such as lead and mercury are known to cause serious health issues when consumed, affecting the functioning of the circulatory and nervous systems and causing developmental disorders. Other metal cations, such as iron and copper, can be found in the human body. However, detrimental health issues can occur when normal concentrations are disturbed (either too high or too low). Iron, for example, can be toxic if in excess in the human body, causing damage to the liver and heart and can cause neuroinflammation and Alzheimer’s disease. Many methods have been employed to detect and measure the concentrations of toxic metal cations. However, these methods are performed in a laboratory and need skilled operators using expensive equipment. This results in long and tedious sample collection, long feedback time and costly analysis. Chemosensors have been researched and proposed as a cost-effective, on-site, real-time alternative for use as metal detectors. Chemosensory can selectively detect specific metal cations and can be sensitive up to the nanomolar range. Various chemosensors have been synthesised and screened for their colourimetric and fluorometric abilities. Colourimetric chemosensors can be used to visually detect cationic and anionic analytes, whereas fluorometric chemosensors are used to detect anions using their emission properties which handheld devices can measure. , Thesis (PhD) -- Faculty of Science, School of Biomolecular and Chemical Sciences, 2023
- Full Text:
- Date Issued: 2023-04
Effects of polymerisation conditions on the mechanism and properties of furfuryl alcohol resin
- Authors: Iroegbu, Austine Ofondu
- Date: 2018
- Subjects: Polymerization , Polyethylene
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/30386 , vital:30937
- Description: The purpose of this study was to do a comparative investigation on the acid- and heat catalysed polymerisation and resinification of furfuryl alcohol and the effects of these polymerisation conditions on the mechanism, morphology, molecular weight and thermal properties of the polyfurfuryl alcohol resins. The formation of furfuryl alcohol polymers was confirmed using size exclusion chromatography (SEC); the synthesised polymer resins were investigated using Fourier transform infrared spectroscopy (FTIR,), scanning electron microscopy (SEM) and Thermogravimetric analysis (TGA). The effects of polymerisation conditions on the mechanism of polyfurfuryl alcohol polymerisation was a major focus of this study. The obtained results confirm that the surface topology, mechanism of polymerisation, thermal behaviour and molecular weights of polyfurfuryl alcohol polymer resins are dependent on the polymerisation condition. The acid and heat catalysed polyfurfuryl alcohol resin polymers presented interesting and promising results.
- Full Text:
- Date Issued: 2018
- Authors: Iroegbu, Austine Ofondu
- Date: 2018
- Subjects: Polymerization , Polyethylene
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/30386 , vital:30937
- Description: The purpose of this study was to do a comparative investigation on the acid- and heat catalysed polymerisation and resinification of furfuryl alcohol and the effects of these polymerisation conditions on the mechanism, morphology, molecular weight and thermal properties of the polyfurfuryl alcohol resins. The formation of furfuryl alcohol polymers was confirmed using size exclusion chromatography (SEC); the synthesised polymer resins were investigated using Fourier transform infrared spectroscopy (FTIR,), scanning electron microscopy (SEM) and Thermogravimetric analysis (TGA). The effects of polymerisation conditions on the mechanism of polyfurfuryl alcohol polymerisation was a major focus of this study. The obtained results confirm that the surface topology, mechanism of polymerisation, thermal behaviour and molecular weights of polyfurfuryl alcohol polymer resins are dependent on the polymerisation condition. The acid and heat catalysed polyfurfuryl alcohol resin polymers presented interesting and promising results.
- Full Text:
- Date Issued: 2018
Molecularly imprinted polymeric materials for adsorptive removal of nitrogen compounds from fuel oils
- Abdul-Quadir, Muhammad Sabiu
- Authors: Abdul-Quadir, Muhammad Sabiu
- Date: 2018
- Subjects: Polymerization , Organonitrogen compounds Nitrogen compounds
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/23426 , vital:30542
- Description: The deleterious effects of refractory polyaromatic hydrocarbons found in fuels such as organonitrogen compounds (quinoline, carbazole and its alkylated derivatives) are such that they emit NOx to the environment when combusted, thereby reducing air quality. These compounds also deactivate the catalyst used during fuel refinement and in catalytic converters of cars. Hydro-denitrogenation (HDN), a process currently being employed in petroleum refineries to eliminate organonitrogen compounds in fuels, is limited in treating these refractory compounds. Hence, this thesis describes the use of two separate complimentary approaches for the removal of organonitrogen compounds in fuel such as oxidative denitrogenation and adsorptive denitrogenation. The catalyzed oxidation of fuel oil model nitrogen containing compound, quinoline to quinoline N-oxide, was conducted under batch and continuous flow microreactor at 70°C by using tert-butylhydroperoxide (t-BuOOH) as oxidant and silica supported V2O5 as catalyst, followed by the selective adsorption of the quinoline N-oxide. An overall conversion of 62% quinoline N-oxide was observed. Quinoline-N-oxide in model fuel was absorbed by employing synthesized molecularly imprinted 2,6-pyridine-polybenzimidazole (2,6-PyPBI) nanofibers, 86% of quinoline-N-oxide was removed to give an adsorption capacity (qe) of 4.8 mg/g. DFT calculations to study the interactions of quinoline-N-oxide vs 2,6-PyPBI indicated that: (i) hydrogen bonding (through amino group of 2,6-PyPBI and oxygen atoms of the quinoline-N-oxide), (ii) pi-pi stacking and (iii) extensive number of van der Waals interactions took place. Several oxygenates from N-compounds were produced, thus, complicating the fuel matrix. Therefore, there is a need to move towards adsorptive denitrogenation. Poly-2-(1H-imidazol-2-yl)-4-phenol (PIMH) imprinted microspheres was prepared by suspension polymerization using 2-(2’-hydroxy-4-ethenylphenyl) imidazole as a functional monomer and ethylene glycol dimethacrylate as a crosslinker in the presence of various organonitrogen compounds (templates) to produce 2-(2’-hydroxy-4-ethenylphenyl) imidazole (PIMH). Imprinted microspheres show selectivity for various target model nitrogen-containing compounds with adsorption capacities of 6.8 ± 0.2 mg/g, 6.3 ± 0.3 mg/g and 5.8 ± 0.3 mg/g for quinoline, pyrimidine and carbazole, respectively. Adsorption selectivity increased in the order of quinoline (αi-r = 136.9) ˃ pyrimidine (αi-r = 126.2) ˃carbazole (αi-r = 86.3), when naphthalene was selected as a reference compound. Though, imprinted microspheres displayed excellent nitrogen compound removal both in model and real fuel, there was a need to improve the adsorbent adsorption capacity for N-compounds in fuel through the fabrication of imprinted nanofibers. Molecularly imprinted poly-2-(1H-imidazol-2-yl)-4-phenol nanofibers was prepared by electrospinning of 2-(2’-hydroxy-4-ethenylphenyl) imidazole (PIMH) in the presence of various organonitrogen compounds. These imprinted nanofibers show selectivity for various target model nitrogen-containing compounds with adsorption capacities of 11.7 ± 0.9 mg/g, 11.9 ± 0.8 mg/g and 11.3 ± 1.1 mg/g for quinoline, pyrimidine and carbazole, respectively. Adsorption selectivity increased in the order of pyrimidine (αi-r = 258.8) ˃ quinoline (αi-r = 235.5) ˃ carbazole (αi-r = 168.2). It further displayed excellent nitrogen removal in real fuel. The use of polybenzimidazole (PBI) nanofibers showed selective adsorption of organonitrogen compounds as imprinted sorbent also displayed high selectivity for their target model nitrogen-containing compounds with adsorption capacities of 11.4 ± 0.4 mg/g, 11.9 ± 0.2 mg/g and 10.9 ± 0.7 mg/g for quinoline, pyrimidine and carbazole respectively. Adsorption selectivity increased in the order of pyrimidine (αi-r = 241.5) ˃ quinoline (αi-r = 237.6) ˃ carbazole (αi-r = 170). Thermodynamic parameters obtained from isothermal titration calorimetry (ITC) revealed that quinoline-PIMH/PBI and pyrimidine-PIMH/PBI interactions are exothermic in nature, while carbazole-PIMH/PBI is endothermic in nature. DFT calculations indicated that π-π interactions/stacking and hydrogen bond interactions took place between N-compounds (carbazole, quinoline and pyrimidine) and adsorbent (PIMH and PBI). A significant reduction in the quantity of nitrogen containing compounds in hydrotreated fuel was observed (peak area reduction) when adsorbents (PIMH and PBI) was employed, however, the complex nature of organonitrogen compounds in fuel complicate the structure/function approach on MIPs for targeting these unwanted compounds.
- Full Text:
- Date Issued: 2018
- Authors: Abdul-Quadir, Muhammad Sabiu
- Date: 2018
- Subjects: Polymerization , Organonitrogen compounds Nitrogen compounds
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/23426 , vital:30542
- Description: The deleterious effects of refractory polyaromatic hydrocarbons found in fuels such as organonitrogen compounds (quinoline, carbazole and its alkylated derivatives) are such that they emit NOx to the environment when combusted, thereby reducing air quality. These compounds also deactivate the catalyst used during fuel refinement and in catalytic converters of cars. Hydro-denitrogenation (HDN), a process currently being employed in petroleum refineries to eliminate organonitrogen compounds in fuels, is limited in treating these refractory compounds. Hence, this thesis describes the use of two separate complimentary approaches for the removal of organonitrogen compounds in fuel such as oxidative denitrogenation and adsorptive denitrogenation. The catalyzed oxidation of fuel oil model nitrogen containing compound, quinoline to quinoline N-oxide, was conducted under batch and continuous flow microreactor at 70°C by using tert-butylhydroperoxide (t-BuOOH) as oxidant and silica supported V2O5 as catalyst, followed by the selective adsorption of the quinoline N-oxide. An overall conversion of 62% quinoline N-oxide was observed. Quinoline-N-oxide in model fuel was absorbed by employing synthesized molecularly imprinted 2,6-pyridine-polybenzimidazole (2,6-PyPBI) nanofibers, 86% of quinoline-N-oxide was removed to give an adsorption capacity (qe) of 4.8 mg/g. DFT calculations to study the interactions of quinoline-N-oxide vs 2,6-PyPBI indicated that: (i) hydrogen bonding (through amino group of 2,6-PyPBI and oxygen atoms of the quinoline-N-oxide), (ii) pi-pi stacking and (iii) extensive number of van der Waals interactions took place. Several oxygenates from N-compounds were produced, thus, complicating the fuel matrix. Therefore, there is a need to move towards adsorptive denitrogenation. Poly-2-(1H-imidazol-2-yl)-4-phenol (PIMH) imprinted microspheres was prepared by suspension polymerization using 2-(2’-hydroxy-4-ethenylphenyl) imidazole as a functional monomer and ethylene glycol dimethacrylate as a crosslinker in the presence of various organonitrogen compounds (templates) to produce 2-(2’-hydroxy-4-ethenylphenyl) imidazole (PIMH). Imprinted microspheres show selectivity for various target model nitrogen-containing compounds with adsorption capacities of 6.8 ± 0.2 mg/g, 6.3 ± 0.3 mg/g and 5.8 ± 0.3 mg/g for quinoline, pyrimidine and carbazole, respectively. Adsorption selectivity increased in the order of quinoline (αi-r = 136.9) ˃ pyrimidine (αi-r = 126.2) ˃carbazole (αi-r = 86.3), when naphthalene was selected as a reference compound. Though, imprinted microspheres displayed excellent nitrogen compound removal both in model and real fuel, there was a need to improve the adsorbent adsorption capacity for N-compounds in fuel through the fabrication of imprinted nanofibers. Molecularly imprinted poly-2-(1H-imidazol-2-yl)-4-phenol nanofibers was prepared by electrospinning of 2-(2’-hydroxy-4-ethenylphenyl) imidazole (PIMH) in the presence of various organonitrogen compounds. These imprinted nanofibers show selectivity for various target model nitrogen-containing compounds with adsorption capacities of 11.7 ± 0.9 mg/g, 11.9 ± 0.8 mg/g and 11.3 ± 1.1 mg/g for quinoline, pyrimidine and carbazole, respectively. Adsorption selectivity increased in the order of pyrimidine (αi-r = 258.8) ˃ quinoline (αi-r = 235.5) ˃ carbazole (αi-r = 168.2). It further displayed excellent nitrogen removal in real fuel. The use of polybenzimidazole (PBI) nanofibers showed selective adsorption of organonitrogen compounds as imprinted sorbent also displayed high selectivity for their target model nitrogen-containing compounds with adsorption capacities of 11.4 ± 0.4 mg/g, 11.9 ± 0.2 mg/g and 10.9 ± 0.7 mg/g for quinoline, pyrimidine and carbazole respectively. Adsorption selectivity increased in the order of pyrimidine (αi-r = 241.5) ˃ quinoline (αi-r = 237.6) ˃ carbazole (αi-r = 170). Thermodynamic parameters obtained from isothermal titration calorimetry (ITC) revealed that quinoline-PIMH/PBI and pyrimidine-PIMH/PBI interactions are exothermic in nature, while carbazole-PIMH/PBI is endothermic in nature. DFT calculations indicated that π-π interactions/stacking and hydrogen bond interactions took place between N-compounds (carbazole, quinoline and pyrimidine) and adsorbent (PIMH and PBI). A significant reduction in the quantity of nitrogen containing compounds in hydrotreated fuel was observed (peak area reduction) when adsorbents (PIMH and PBI) was employed, however, the complex nature of organonitrogen compounds in fuel complicate the structure/function approach on MIPs for targeting these unwanted compounds.
- Full Text:
- Date Issued: 2018
Synthesis of fluorescent polymers with pendant triazole-quinoline groups via raft polymerization
- Ngororabanga, Jean Marie Vianney
- Authors: Ngororabanga, Jean Marie Vianney
- Date: 2014
- Subjects: Fluorescent polymers , Polymerization
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10440 , http://hdl.handle.net/10948/d1020798
- Description: In this study, fluorescent polymers with pendant quinoline groups were synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT) from a fluorescent quinoline-based vinyl monomer, synthesized in multiple steps from p-nitroaniline and crotonaldehyde. The structures of the synthesized vinyl monomer and polymers were confirmed by NMR and FT-IR spectroscopy, X-ray studies and modeling stdies. The photophysical properties of the synthesized quinoline compounds and resulting polymers were investigated. In order to evaluate the binding potential of our quinoline-based polymer in the presence of transition metal ions, preliminary studies on a complexation of quinoline-based polymers with Zn, Cd, Hg, Fe, and Ni were carried out. The investigation of fluorescence properties of the complexes showed fluorescence quenching for Fe(II), and fluorescence enhancement for the remaining ions [Zn(II), Cd(II), Hg(II), and Ni(II)].
- Full Text:
- Date Issued: 2014
- Authors: Ngororabanga, Jean Marie Vianney
- Date: 2014
- Subjects: Fluorescent polymers , Polymerization
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10440 , http://hdl.handle.net/10948/d1020798
- Description: In this study, fluorescent polymers with pendant quinoline groups were synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT) from a fluorescent quinoline-based vinyl monomer, synthesized in multiple steps from p-nitroaniline and crotonaldehyde. The structures of the synthesized vinyl monomer and polymers were confirmed by NMR and FT-IR spectroscopy, X-ray studies and modeling stdies. The photophysical properties of the synthesized quinoline compounds and resulting polymers were investigated. In order to evaluate the binding potential of our quinoline-based polymer in the presence of transition metal ions, preliminary studies on a complexation of quinoline-based polymers with Zn, Cd, Hg, Fe, and Ni were carried out. The investigation of fluorescence properties of the complexes showed fluorescence quenching for Fe(II), and fluorescence enhancement for the remaining ions [Zn(II), Cd(II), Hg(II), and Ni(II)].
- Full Text:
- Date Issued: 2014
The development of functionalized electrospun nanofibers for the control of pathogenic microorganisms in water.
- Authors: Kleyi, Phumelele Eldridge
- Date: 2014
- Subjects: Electrospinning , Nanofibers , Pathogenic microorganisms , Pathogenic microorganisms -- Detection , Drinking water -- Microbiology , Water quality -- Measurement , Imidazoles , Spectrum analysis , Anti-infective agents , Polymerization
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4497 , http://hdl.handle.net/10962/d1013134
- Description: The thesis presents the development of functionalized electrospun nylon 6 nanofibers for the eradication of pathogenic microorganisms in drinking water. Imidazole derivatives were synthesized as the antimicrobial agents and were characterized by means of NMR spectroscopy, IR spectroscopy, elemental analysis and X-ray crystallography. The first set of compounds (2-substituted N-alkylimidazoles) consisted of imidazole derivatives substituted with different alkyl groups (methyl, ethyl, propyl, butyl, heptyl, octyl, decyl and benzyl) at the 1-position and various functional groups [carboxaldehyde (CHO), alcohol (CH2OH) and carboxylic acid (COOH)] at the 2-position. It was observed that the antimicrobial activity of the compounds increased with increasing alkyl chain length and decreasing pKa of the 2-substituent. It was also observed that the antimicrobial activity was predominantly against a Gram-positive bacterial strains [Staphylococcus aureus (MIC = 5-160 μg/mL) and Bacillus subtilis subsp. spizizenii (MIC = 5-20 μg/mL)], with the latter being the more susceptible. However, the compounds displayed poor antimicrobial activity against Gram-negative bacterial strain, E. coli (MIC = 150- >2500 μg/mL) and did not show any activity against the yeast, C. albicans. The second set of compounds consisted of the silver(I) complexes containing 2-hydroxymethyl-N-alkylimidazoles. The complexes displayed a broad spectrum antimicrobial activity towards the microorganisms that were tested and their activity [E. coli (MIC = 5-40 μg/mL), S. aureus (MIC = 20-80 μg/mL), Bacillus subtilis subsp. spizizenii (MIC = 5-40 μg/mL) and C. albicans (MIC = 40-80 μg/mL)] increased with the alkyl chain length of the 2-hydroxymethyl-N-alkylimidazole. The third set of compounds consisted of the vinylimidazoles containing the vinyl group either at the 1-position or at the 4- or 5- position. The imidazoles with the vinyl group at the 4- or 5-position contained the alkyl group (decyl) at the 1-position. For the fabrication of the antimicrobial nanofibers, the first two sets of imidazole derivatives (2-substituted N-alkylimidazoles and silver(I) complexes) were incorporated into electrospun nylon 6 nanofibers while the third set (2-substituted vinylimidazoles) was immobilized onto electrospun nylon 6 nanofibers employing the graft polymerization method. The antimicrobial nylon nanofibers were characterized by IR spectroscopy and SEM-EDAX (EDS). The electrospun nylon 6 nanofibers incorporated with 2-substituted N-alkylimidazoles displayed moderate to excellent levels of growth reduction against S. aureus (73.2-99.8 percent). For the electrospun nylon 6 nanofibers incorporated with silver(I) complexes, the levels of growth reduction were >99.99 percent, after the antimicrobial activity evaluation using the shake flask method. Furthermore, the grafted electrospun nylon 6 nanofibers showed excellent levels of growth reduction for E. coli (99.94-99.99 percent) and S. aureus (99.93-99.99 percent). The reusability results indicated that the grafted electrospun nylon 6 nanofibers maintained the antibacterial activity until the third cycle of useage. The cytotoxicity studies showed that grafted electrospun nylon 6 nanofibers possess lower cytotoxic effects on Chang liver cells with IC50 values in the range 23.48-26.81 μg/mL. The thesis demonstrated that the development of antimicrobial electrospun nanofibers, with potential for the eradication of pathogenic microoganisms in water, could be accomplished by incorporation as well as immobilization strategies.
- Full Text:
- Date Issued: 2014
- Authors: Kleyi, Phumelele Eldridge
- Date: 2014
- Subjects: Electrospinning , Nanofibers , Pathogenic microorganisms , Pathogenic microorganisms -- Detection , Drinking water -- Microbiology , Water quality -- Measurement , Imidazoles , Spectrum analysis , Anti-infective agents , Polymerization
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4497 , http://hdl.handle.net/10962/d1013134
- Description: The thesis presents the development of functionalized electrospun nylon 6 nanofibers for the eradication of pathogenic microorganisms in drinking water. Imidazole derivatives were synthesized as the antimicrobial agents and were characterized by means of NMR spectroscopy, IR spectroscopy, elemental analysis and X-ray crystallography. The first set of compounds (2-substituted N-alkylimidazoles) consisted of imidazole derivatives substituted with different alkyl groups (methyl, ethyl, propyl, butyl, heptyl, octyl, decyl and benzyl) at the 1-position and various functional groups [carboxaldehyde (CHO), alcohol (CH2OH) and carboxylic acid (COOH)] at the 2-position. It was observed that the antimicrobial activity of the compounds increased with increasing alkyl chain length and decreasing pKa of the 2-substituent. It was also observed that the antimicrobial activity was predominantly against a Gram-positive bacterial strains [Staphylococcus aureus (MIC = 5-160 μg/mL) and Bacillus subtilis subsp. spizizenii (MIC = 5-20 μg/mL)], with the latter being the more susceptible. However, the compounds displayed poor antimicrobial activity against Gram-negative bacterial strain, E. coli (MIC = 150- >2500 μg/mL) and did not show any activity against the yeast, C. albicans. The second set of compounds consisted of the silver(I) complexes containing 2-hydroxymethyl-N-alkylimidazoles. The complexes displayed a broad spectrum antimicrobial activity towards the microorganisms that were tested and their activity [E. coli (MIC = 5-40 μg/mL), S. aureus (MIC = 20-80 μg/mL), Bacillus subtilis subsp. spizizenii (MIC = 5-40 μg/mL) and C. albicans (MIC = 40-80 μg/mL)] increased with the alkyl chain length of the 2-hydroxymethyl-N-alkylimidazole. The third set of compounds consisted of the vinylimidazoles containing the vinyl group either at the 1-position or at the 4- or 5- position. The imidazoles with the vinyl group at the 4- or 5-position contained the alkyl group (decyl) at the 1-position. For the fabrication of the antimicrobial nanofibers, the first two sets of imidazole derivatives (2-substituted N-alkylimidazoles and silver(I) complexes) were incorporated into electrospun nylon 6 nanofibers while the third set (2-substituted vinylimidazoles) was immobilized onto electrospun nylon 6 nanofibers employing the graft polymerization method. The antimicrobial nylon nanofibers were characterized by IR spectroscopy and SEM-EDAX (EDS). The electrospun nylon 6 nanofibers incorporated with 2-substituted N-alkylimidazoles displayed moderate to excellent levels of growth reduction against S. aureus (73.2-99.8 percent). For the electrospun nylon 6 nanofibers incorporated with silver(I) complexes, the levels of growth reduction were >99.99 percent, after the antimicrobial activity evaluation using the shake flask method. Furthermore, the grafted electrospun nylon 6 nanofibers showed excellent levels of growth reduction for E. coli (99.94-99.99 percent) and S. aureus (99.93-99.99 percent). The reusability results indicated that the grafted electrospun nylon 6 nanofibers maintained the antibacterial activity until the third cycle of useage. The cytotoxicity studies showed that grafted electrospun nylon 6 nanofibers possess lower cytotoxic effects on Chang liver cells with IC50 values in the range 23.48-26.81 μg/mL. The thesis demonstrated that the development of antimicrobial electrospun nanofibers, with potential for the eradication of pathogenic microoganisms in water, could be accomplished by incorporation as well as immobilization strategies.
- Full Text:
- Date Issued: 2014
Synthesis of fluorescent polymers with coumarin backbones by "click" polymerization
- Authors: Okerio, Jaspher Mosomi
- Date: 2013
- Subjects: Polymerization , Fluorescent polymers
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10431 , http://hdl.handle.net/10948/d1020132
- Description: Click chemistry is one of the growing areas of research which is applied in the design and synthesis of a wide range of polymeric architectures. This investigation focuses on the synthesis of fluorescent coumarin based polymers by “click” A-B step growth polymerization process and evaluation of their photophysical properties. Non-fluorescent azide-alkyne functionalized coumarin-based monomers were synthesized in multiple steps from 2,4-dihydroxybenzaldehyde in reasonable yields. Polymers with coumarin backbone were synthesized from azide-alkyne functionalized coumarin monomers via the Cu(I) catalyzed 1,3-dipolar cycloaddition reaction between azides and alkynes, a typical click reaction, to form polymers whose repeating units are connected by a 1,2,3-triazole ring. The structures of the synthesized polymers were confirmed by NMR and FT-IR spectroscopy. Finally, the photophysical properties of the synthesized monomers and polymers were evaluated in DMF. All coumarin based monomers showed reduced fluorescent properties due to the quenching effect from the azido group. Although all polymers absorbed at maximum wavelength of 340 nm, a characteristic for coumarin chromophore, the homo-polymers emitted at a shorter wavelength of 413 nm as compared to the co-polymers which emitted at 421 nm.
- Full Text:
- Date Issued: 2013
- Authors: Okerio, Jaspher Mosomi
- Date: 2013
- Subjects: Polymerization , Fluorescent polymers
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10431 , http://hdl.handle.net/10948/d1020132
- Description: Click chemistry is one of the growing areas of research which is applied in the design and synthesis of a wide range of polymeric architectures. This investigation focuses on the synthesis of fluorescent coumarin based polymers by “click” A-B step growth polymerization process and evaluation of their photophysical properties. Non-fluorescent azide-alkyne functionalized coumarin-based monomers were synthesized in multiple steps from 2,4-dihydroxybenzaldehyde in reasonable yields. Polymers with coumarin backbone were synthesized from azide-alkyne functionalized coumarin monomers via the Cu(I) catalyzed 1,3-dipolar cycloaddition reaction between azides and alkynes, a typical click reaction, to form polymers whose repeating units are connected by a 1,2,3-triazole ring. The structures of the synthesized polymers were confirmed by NMR and FT-IR spectroscopy. Finally, the photophysical properties of the synthesized monomers and polymers were evaluated in DMF. All coumarin based monomers showed reduced fluorescent properties due to the quenching effect from the azido group. Although all polymers absorbed at maximum wavelength of 340 nm, a characteristic for coumarin chromophore, the homo-polymers emitted at a shorter wavelength of 413 nm as compared to the co-polymers which emitted at 421 nm.
- Full Text:
- Date Issued: 2013
Synthesis of fluorescent polymers with pendant triazole-substituted coumarin side-chains via a combination of click chemistry and raft-mediated polymerization
- Authors: Wali, Nwabisa Whitney
- Date: 2013
- Subjects: Fluorescent polymers , Polymerization , Macromolecules -- Synthesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10432 , http://hdl.handle.net/10948/d1020142
- Description: This research project focuses on the synthesis of fluorescent polymers with pendant triazole-substituted coumarin side chain units. Copper(I)-catalyzed Huisgen’s 1,3-dipolar cycloaddition of alkynes with azides to form a 1,2,3-triazole ring, a typical example of “click” reaction, has been utilized for the synthesis of a novel vinyl monomer, 2-oxo-3-(4- vinyl-1H-1,2,3-triazol-1-yl)-2H-chromen-7-yl acetate 62. The monomer and its precursors were synthesised and characterized using 1D- and 2D-NMR and FT-IR. Coumarin-containing triazole polymers were synthesised using free radical polymerization. Reversible Addition-Fragmentation Chain Transfer (RAFT)-mediated polymerization was used to synthesise well defined coumarin-containing triazole polymers with moderate PDI values. The polymers were characterised using 1H-NMR and FT-IR. Modelling of the monomer precursor 61 and the monomer 62 at DFT level of approximation provided useful insights into possible conformations adopted by the monomer precursor 61 and the monomer 62. The photophysical properties of the novel monomer and the synthesised polymers were investigated in a polar solvent.
- Full Text:
- Date Issued: 2013
- Authors: Wali, Nwabisa Whitney
- Date: 2013
- Subjects: Fluorescent polymers , Polymerization , Macromolecules -- Synthesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10432 , http://hdl.handle.net/10948/d1020142
- Description: This research project focuses on the synthesis of fluorescent polymers with pendant triazole-substituted coumarin side chain units. Copper(I)-catalyzed Huisgen’s 1,3-dipolar cycloaddition of alkynes with azides to form a 1,2,3-triazole ring, a typical example of “click” reaction, has been utilized for the synthesis of a novel vinyl monomer, 2-oxo-3-(4- vinyl-1H-1,2,3-triazol-1-yl)-2H-chromen-7-yl acetate 62. The monomer and its precursors were synthesised and characterized using 1D- and 2D-NMR and FT-IR. Coumarin-containing triazole polymers were synthesised using free radical polymerization. Reversible Addition-Fragmentation Chain Transfer (RAFT)-mediated polymerization was used to synthesise well defined coumarin-containing triazole polymers with moderate PDI values. The polymers were characterised using 1H-NMR and FT-IR. Modelling of the monomer precursor 61 and the monomer 62 at DFT level of approximation provided useful insights into possible conformations adopted by the monomer precursor 61 and the monomer 62. The photophysical properties of the novel monomer and the synthesised polymers were investigated in a polar solvent.
- Full Text:
- Date Issued: 2013
An ion imprinted polymer for the determination of Ni (II) ions from mine tailing samples
- Authors: Rammika, Modise
- Date: 2011
- Subjects: Imprinted polymers , Metal ions , Polymerization , Mineral industries -- Waste disposal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4323 , http://hdl.handle.net/10962/d1004981 , Imprinted polymers , Metal ions , Polymerization , Mineral industries -- Waste disposal
- Description: A Ni(II)-dimethylglyoxime ion imprinted polymer {Ni(II)-DMG IIP} was synthesized by the trapping method using the bulk polymerisation format. The structures of the imprinted and non-imprinted polymer were evaluated by infrared spectroscopy and the morphology was observed by scanning electron microscopy. The Ni(II)-DMG IIP was optimised for pH, mass, time and by the uniform design experimental method for the molar ratios of monomer to crosslinker to porogen and template to ligands as well as keeping these parameters constant and varying the quantities of initiator, 2,2'-azobisisobutyronitrile (AIBN). The optimum pH was 8.5, optimum mass was 50 mg, optimum time was 1 min and the optimum molar ratios of crosslinker to monomer, monomer to template and nickel(II) sulfate hexahydrate (NiSO₄.6H₂O) to 4-vinylpyridine to dimethylglyoxime were found to be 3.3:1.0, 0.6:1.0 and 1.0:0.6:3.6 respectively with 30 mg and 8 mL as the optimum amounts of initiator and porogen respectively. Through this optimisation, recovery of Ni(II) was increased from 98 to 100%. Selectivity of the ion imprinted polymer was evaluated by analysing, using an inductively coupled plasma-optical emission spectrometer, for Ni(II) ions that were spiked with varying concentrations of Co(II), Cu(II), Zn(II), Pd(II), Fe(II), Ca(II), Mg(II), Na(I) and K(I) in aqueous samples. Selectivity studies also confirmed that the ion imprinted polymer had very good selectivity characterised by % RSD of less than 5 %. Co(II) was the only ion found to slightly interfere with the determination of Ni(II). The limits of detection and quantification were found to be 3x10⁻⁴ μg/mL and 9x10⁻⁴ μg/mL respectively. The method was evaluated by a custom solution of ground water certified reference material (SEP-3) and sandy soil reference material (BCR-142R) and the concentrations of Ni(II) obtained were not significantly different to the certified ones. The Ni(II)-DMG IIP was then evaluated in aqueous and soil samples where recoveries of 93 to 100% and 98 to 99% respectively were obtained with enrichment factors ranging from 2 to 18 in aqueous and 27 to 40 in soil samples. Finally, the Ni(II)-DMG IIP was used to analyse mine tailings samples and Ni(II) recovery of 99% was obtained with an enrichment factor of 2.
- Full Text:
- Date Issued: 2011
- Authors: Rammika, Modise
- Date: 2011
- Subjects: Imprinted polymers , Metal ions , Polymerization , Mineral industries -- Waste disposal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4323 , http://hdl.handle.net/10962/d1004981 , Imprinted polymers , Metal ions , Polymerization , Mineral industries -- Waste disposal
- Description: A Ni(II)-dimethylglyoxime ion imprinted polymer {Ni(II)-DMG IIP} was synthesized by the trapping method using the bulk polymerisation format. The structures of the imprinted and non-imprinted polymer were evaluated by infrared spectroscopy and the morphology was observed by scanning electron microscopy. The Ni(II)-DMG IIP was optimised for pH, mass, time and by the uniform design experimental method for the molar ratios of monomer to crosslinker to porogen and template to ligands as well as keeping these parameters constant and varying the quantities of initiator, 2,2'-azobisisobutyronitrile (AIBN). The optimum pH was 8.5, optimum mass was 50 mg, optimum time was 1 min and the optimum molar ratios of crosslinker to monomer, monomer to template and nickel(II) sulfate hexahydrate (NiSO₄.6H₂O) to 4-vinylpyridine to dimethylglyoxime were found to be 3.3:1.0, 0.6:1.0 and 1.0:0.6:3.6 respectively with 30 mg and 8 mL as the optimum amounts of initiator and porogen respectively. Through this optimisation, recovery of Ni(II) was increased from 98 to 100%. Selectivity of the ion imprinted polymer was evaluated by analysing, using an inductively coupled plasma-optical emission spectrometer, for Ni(II) ions that were spiked with varying concentrations of Co(II), Cu(II), Zn(II), Pd(II), Fe(II), Ca(II), Mg(II), Na(I) and K(I) in aqueous samples. Selectivity studies also confirmed that the ion imprinted polymer had very good selectivity characterised by % RSD of less than 5 %. Co(II) was the only ion found to slightly interfere with the determination of Ni(II). The limits of detection and quantification were found to be 3x10⁻⁴ μg/mL and 9x10⁻⁴ μg/mL respectively. The method was evaluated by a custom solution of ground water certified reference material (SEP-3) and sandy soil reference material (BCR-142R) and the concentrations of Ni(II) obtained were not significantly different to the certified ones. The Ni(II)-DMG IIP was then evaluated in aqueous and soil samples where recoveries of 93 to 100% and 98 to 99% respectively were obtained with enrichment factors ranging from 2 to 18 in aqueous and 27 to 40 in soil samples. Finally, the Ni(II)-DMG IIP was used to analyse mine tailings samples and Ni(II) recovery of 99% was obtained with an enrichment factor of 2.
- Full Text:
- Date Issued: 2011
An ion imprinted polymer for the selective extraction of mercury (II) ions in aqueous media
- Authors: Batlokwa, Bareki Shima
- Date: 2010 , 2013-07-18
- Subjects: Mercury , Metal ions , Imprinted polymers , Polymerization
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4294 , http://hdl.handle.net/10962/d1004541 , Mercury , Metal ions , Imprinted polymers , Polymerization
- Description: This thesis presents the application of an imprinted mercury(lI) polymer that we synthesized by copolymerizing the functional and cross-linking monomers, N'-[3-(Trimethoxysilyl)propyl] diethylenetriamine (TPET) and tetraethylorthosilicate (TEOS) in the presence of mercury (II) ions as template. A bulk polymerization method following a double-imprinting procedure and employing hexadecyltrimethylammonium bromide (CTAB), as a second template to improve the efficiency of the polymer was employed in the synthesis. The imprinted polymer particles were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and their average size determined by screen analysis using standard test sieves. The relative selective coefficients (k') of the imprinted polymer evaluated from selective binding studies between Hg ²⁺and Cu²⁺ or Hg²⁺ and Cd²⁺, were 10588 and 3147, respectively. These values indicated highly favored Hg²⁺ extractions over the two competing ions. Application of the polymer to various real water samples (tap, sea, river, pulverized coal solution, treated and untreated sewerage from the vicinity of Grahamstown in South Africa) showed high extraction efficiencies (EEs) of Hg²⁺ ions; (over 84% in all cases) as evaluated from the detected unextracted Hg²⁺ ions by inductively coupled plasma optical emission spectroscopy (ICP-OES). The limit of detection (LOD, 3ơ) of the method was evaluated to be 0.036 ng ml⁻¹ and generally the data (n=10) had percentage relative standard deviation (%RSD) of less than 4%. These findings indicate that the double-imprinted polymer has potential to be used as an efficient extraction material for the selective pre-concentration of mercury(lI) ions in aqueous environments. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2010
- Authors: Batlokwa, Bareki Shima
- Date: 2010 , 2013-07-18
- Subjects: Mercury , Metal ions , Imprinted polymers , Polymerization
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4294 , http://hdl.handle.net/10962/d1004541 , Mercury , Metal ions , Imprinted polymers , Polymerization
- Description: This thesis presents the application of an imprinted mercury(lI) polymer that we synthesized by copolymerizing the functional and cross-linking monomers, N'-[3-(Trimethoxysilyl)propyl] diethylenetriamine (TPET) and tetraethylorthosilicate (TEOS) in the presence of mercury (II) ions as template. A bulk polymerization method following a double-imprinting procedure and employing hexadecyltrimethylammonium bromide (CTAB), as a second template to improve the efficiency of the polymer was employed in the synthesis. The imprinted polymer particles were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and their average size determined by screen analysis using standard test sieves. The relative selective coefficients (k') of the imprinted polymer evaluated from selective binding studies between Hg ²⁺and Cu²⁺ or Hg²⁺ and Cd²⁺, were 10588 and 3147, respectively. These values indicated highly favored Hg²⁺ extractions over the two competing ions. Application of the polymer to various real water samples (tap, sea, river, pulverized coal solution, treated and untreated sewerage from the vicinity of Grahamstown in South Africa) showed high extraction efficiencies (EEs) of Hg²⁺ ions; (over 84% in all cases) as evaluated from the detected unextracted Hg²⁺ ions by inductively coupled plasma optical emission spectroscopy (ICP-OES). The limit of detection (LOD, 3ơ) of the method was evaluated to be 0.036 ng ml⁻¹ and generally the data (n=10) had percentage relative standard deviation (%RSD) of less than 4%. These findings indicate that the double-imprinted polymer has potential to be used as an efficient extraction material for the selective pre-concentration of mercury(lI) ions in aqueous environments. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2010
- «
- ‹
- 1
- ›
- »