The impact of load and frequency on the biomechanical, physiological and perceptual responses to dynamic pushing
- Authors: Cripwell, Adam Michael
- Date: 2007
- Subjects: Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5144 , http://hdl.handle.net/10962/d1008183 , Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Description: The objective of the present research was to establish the biomechanical, physiological and perceptual responses of male operators to dynamic pushing tasks. The pushing tasks were performed using an industrial pallet jack with varying load/frequency combinations, in a controlled laboratory environment. Thirty healthy male subjects comprised the sample. Experimental procedures were conducted utilising the Chatillon ™ Dynamometer to measure force output in the initial, sustained and ending phases. The K4b2 Ergospirometer was used to assess physiological responses (heart rate and oxygen consumption [V02])' Nine recorded forces and nine experimental conditions formed the basis of this study, with subjects required to push three loads (200kg, 350kg, 500kg) at three frequencies (1120 sec, 1/40 sec, 1/60 sec) at a speed of 3.6km.h-1 over 14 metres on a co-efficient of friction controlled walkway for six minutes. Gait analysis, along with perceptions of exertion (,Central ' and 'Local' RPE) were collected during the third and sixth minutes of each condition . Body discomfort and contribution were identified upon completion of each condition. The results demonstrated that load and frequency interacted to influence responses within each domain. Increasing loads required increased force output during each stage of the push, which had a concomitant effect on physiological and perceptual responses. Significant differences arose between the initial, sustained and ending forces for each load, showing the direct relationship between load and force exertion. The combination of heaviest load/quickest frequency required the greatest physiological output, exceeding recommended guidelines for heart rate, V02 and energy expenditure responses. Intermediate combinations required moderate and acceptable energy cost. Linear relationships were established between heart rate and oxygen consumption , as well as between load and V02 , thus providing industrial practitioners an opportunity to evaluate task demands in situ. The combination of high forces and elevated physiological responses increased the subjective rating of the condition. The results emphasise the need to holistically consider all contributing factors in a dynamic pushing task. Dynamic pushing tasks place biomechanical, physiological and perceptual demands on the human operator, which must be minimised in order to ensure that this form of manual materials handling becomes sustainable in the long term.
- Full Text:
- Date Issued: 2007
- Authors: Cripwell, Adam Michael
- Date: 2007
- Subjects: Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5144 , http://hdl.handle.net/10962/d1008183 , Work -- Physiological aspects , Psychophysiology , Human engineering , Biomechanics
- Description: The objective of the present research was to establish the biomechanical, physiological and perceptual responses of male operators to dynamic pushing tasks. The pushing tasks were performed using an industrial pallet jack with varying load/frequency combinations, in a controlled laboratory environment. Thirty healthy male subjects comprised the sample. Experimental procedures were conducted utilising the Chatillon ™ Dynamometer to measure force output in the initial, sustained and ending phases. The K4b2 Ergospirometer was used to assess physiological responses (heart rate and oxygen consumption [V02])' Nine recorded forces and nine experimental conditions formed the basis of this study, with subjects required to push three loads (200kg, 350kg, 500kg) at three frequencies (1120 sec, 1/40 sec, 1/60 sec) at a speed of 3.6km.h-1 over 14 metres on a co-efficient of friction controlled walkway for six minutes. Gait analysis, along with perceptions of exertion (,Central ' and 'Local' RPE) were collected during the third and sixth minutes of each condition . Body discomfort and contribution were identified upon completion of each condition. The results demonstrated that load and frequency interacted to influence responses within each domain. Increasing loads required increased force output during each stage of the push, which had a concomitant effect on physiological and perceptual responses. Significant differences arose between the initial, sustained and ending forces for each load, showing the direct relationship between load and force exertion. The combination of heaviest load/quickest frequency required the greatest physiological output, exceeding recommended guidelines for heart rate, V02 and energy expenditure responses. Intermediate combinations required moderate and acceptable energy cost. Linear relationships were established between heart rate and oxygen consumption , as well as between load and V02 , thus providing industrial practitioners an opportunity to evaluate task demands in situ. The combination of high forces and elevated physiological responses increased the subjective rating of the condition. The results emphasise the need to holistically consider all contributing factors in a dynamic pushing task. Dynamic pushing tasks place biomechanical, physiological and perceptual demands on the human operator, which must be minimised in order to ensure that this form of manual materials handling becomes sustainable in the long term.
- Full Text:
- Date Issued: 2007
Effects of incremented loads over preferred values on psychophysical and selected gait kinematic factor
- Authors: Manley, Peter Gwynne
- Date: 1989
- Subjects: Psychophysiology , Kinematics , Work -- Physiological aspects , Human engineering
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:5160 , http://hdl.handle.net/10962/d1015734
- Description: This study investigated the effects of incremented loads greater than maximal acceptable loads on selected locomotor kinematic and psychophysical variables for four different hand-held load-carriage methods. Ten male and ten female subjects, between the ages of 18 and 30, participated in four experimental sessions. Data collection involved obtaining selected anthropometric, strength, maximal load and preferred load, gait kinematic, and psychophysical values. The anthropometric, strength and load capacity variables enabled absolute and morphology normalised sex-based comparisons to be made. The kinematic and psychophysical parameters were used to quantify any changes from two sets of baseline values,"unloaded" and "maximal acceptable load" values, when loads were increased and carrying methods changed. Statistical analysis revealed that males were taller, heavier and stronger than females (p<0.05). Males chose significantly greater maximal acceptable loads and absolute maximal loads than females when expressed in their absolute or relative terms. Preferred walking speeds were not significantly different for unloaded or loaded conditions, although males walked significantly faster in absolute terms (but not in relative terms) than females. Different load carrying methods and incremented loads brought. about significant changes to several of the kinematic parameters investigated. Finally, ratings of perceived exertion, as well as the number of exertion sites, were seen to increase significantly as load increased. These values were not, however, significantly affected by differences in load carriage method.
- Full Text:
- Date Issued: 1989
- Authors: Manley, Peter Gwynne
- Date: 1989
- Subjects: Psychophysiology , Kinematics , Work -- Physiological aspects , Human engineering
- Language: English
- Type: Thesis , Masters , MA
- Identifier: vital:5160 , http://hdl.handle.net/10962/d1015734
- Description: This study investigated the effects of incremented loads greater than maximal acceptable loads on selected locomotor kinematic and psychophysical variables for four different hand-held load-carriage methods. Ten male and ten female subjects, between the ages of 18 and 30, participated in four experimental sessions. Data collection involved obtaining selected anthropometric, strength, maximal load and preferred load, gait kinematic, and psychophysical values. The anthropometric, strength and load capacity variables enabled absolute and morphology normalised sex-based comparisons to be made. The kinematic and psychophysical parameters were used to quantify any changes from two sets of baseline values,"unloaded" and "maximal acceptable load" values, when loads were increased and carrying methods changed. Statistical analysis revealed that males were taller, heavier and stronger than females (p<0.05). Males chose significantly greater maximal acceptable loads and absolute maximal loads than females when expressed in their absolute or relative terms. Preferred walking speeds were not significantly different for unloaded or loaded conditions, although males walked significantly faster in absolute terms (but not in relative terms) than females. Different load carrying methods and incremented loads brought. about significant changes to several of the kinematic parameters investigated. Finally, ratings of perceived exertion, as well as the number of exertion sites, were seen to increase significantly as load increased. These values were not, however, significantly affected by differences in load carriage method.
- Full Text:
- Date Issued: 1989
- «
- ‹
- 1
- ›
- »