Finite precision arithmetic in Polyphase Filterbank implementations
- Authors: Myburgh, Talon
- Date: 2020
- Subjects: Radio interferometers , Interferometry , Radio telescopes , Gate array circuits , Floating-point arithmetic , Python (Computer program language) , Polyphase Filterbank , Finite precision arithmetic , MeerKAT
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/146187 , vital:38503
- Description: The MeerKAT is the most sensitive radio telescope in its class, and it is important that systematic effects do not limit the dynamic range of the instrument, preventing this sensitivity from being harnessed for deep integrations. During commissioning, spurious artefacts were noted in the MeerKAT passband and the root cause was attributed to systematic errors in the digital signal path. Finite precision arithmetic used by the Polyphase Filterbank (PFB) was one of the main factors contributing to the spurious responses, together with bugs in the firmware. This thesis describes a software PFB simulator that was built to mimic the MeerKAT PFB and allow investigation into the origin and mitigation of the effects seen on the telescope. This simulator was used to investigate the effects in signal integrity of various rounding techniques, overflow strategies and dual polarisation processing in the PFB. Using the simulator to investigate a number of different signal levels, bit-width and algorithmic scenarios, it gave insight into how the periodic dips occurring in the MeerKAT passband were the result of the implementation using an inappropriate rounding strategy. It further indicated how to select the best strategy for preventing overflow while maintaining high quantization effciency in the FFT. This practice of simulating the design behaviour in the PFB independently of the tools used to design the DSP firmware, is a step towards an end-to-end simulation of the MeerKAT system (or any radio telescope using nite precision digital signal processing systems). This would be useful for design, diagnostics, signal analysis and prototyping of the overall instrument.
- Full Text:
- Date Issued: 2020
Measuring the RFI environment of the South African SKA site
- Authors: Manners, Paul John
- Date: 2007
- Subjects: Radio telescopes , Radio telescopes -- South Africa , Radio astronomy , Radio astronomy -- South Africa , Square Kilometer Array (Spacecraft) , Radio -- Interference -- Measurement
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5474 , http://hdl.handle.net/10962/d1005259 , Radio telescopes , Radio telescopes -- South Africa , Radio astronomy , Radio astronomy -- South Africa , Square Kilometer Array (Spacecraft) , Radio -- Interference -- Measurement
- Description: The Square Kilometre Array (SKA) Project is an international effort to build the world’s largest radio telescope. It will be 100 times more sensitive than any other radio telescope currently in existence and will consist of thousands of dishes placed at baselines up to 3000 km. In addition to its increased sensitivity it will operate over a very wide frequency range (current specification is 100 MHz - 22 GHz) and will use frequency bands not primarily allocated to radio astronomy. Because of this the telescope needs to be located at a site with low levels of radio frequency interference (RFI). This implies a site that is remote and away from human activity. In bidding to host the SKA, South Africa was required to conduct an RFI survey at its proposed site for a period of 12 months. Apart from this core site, where more than half the SKA dishes may potentially be deployed, the measurement of remote sites in Southern Africa was also required. To conduct measurements at these sites, three mobile measurement systems were designed and built by the South African SKA Project. The design considerations, implementation and RFI measurements recorded during this campaign will be the focus for this dissertation.
- Full Text:
- Date Issued: 2007
The performance of a 22 GHz radio telescope
- Authors: Gaylard, Michael John
- Date: 1977
- Subjects: Radio telescopes , Paraboloid
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5520 , http://hdl.handle.net/10962/d1011946 , Radio telescopes , Paraboloid
- Description: The performance of the Rhodes 22 GHz radio telescope and its improvement are discussed in this thesis. The reflector surfaces of the Cassegrain antenna were surveyed and the surface errors minimised, while the magnitude of thermal and gravitational defomations was calculated. The design and operation of the microwave front end has been improved, and the mixer performance characterised. The continuum and spectral line receivers and their sensitivity are described. The aperture efficiency, which has been raised from 0,47 to 0,57, was deduced from solar and lunar observations and atmospheric attenuation measurements. The antenna beam pattern was also obtained from the observations, with the aid of a computer program, and is compared to that predicted for the telescope.
- Full Text:
- Date Issued: 1977
A 22 GHz radio telescope
- Authors: Mutch, Laurence Ian
- Date: 1976
- Subjects: Radio telescopes , Paraboloid , Radio astronomy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5532 , http://hdl.handle.net/10962/d1012919
- Description: This thesis reports on the design, construction, testing and operation of the spectral line and continuum receivers built for the 22 GHz Radio Telescope. First results from 'the telescope were obtained and have been analysed to give an estimate of system efficiency. Tests have been performed on the front end and in particular on the 22 GHz mixer in order to determine the minimum detectable temperature. The Sun, Moon and major planets are sources suitable for antenna alignment and consequently a literature survey of emission at 22 GHz from elements of the Solar system has been made.
- Full Text:
- Date Issued: 1976