Optimisation of a mini horizontal axis wind turbine to increase energy yield during short duration wind variations
- Authors: Poole, Sean Nichola
- Date: 2017
- Subjects: Wind turbines -- Design and construction , Horizontal axis wind turbines -- Blades , Wind turbines -- Aerodynamics , Wind power
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/7036 , vital:21196
- Description: The typical methodology for analytically designing a wind turbine blade is by means of blade element momentum (BEM) theory, whereby the aerofoil angle of attack is optimized to achieve a maximum lift-to-drag ratio. This research aims to show that an alternative optimisation methodology could yield better results, especially in gusty and turbulent wind conditions. This alternative method looks at increasing the aerofoil Reynolds number by increasing the aerofoil chord length. The increased Reynolds number generally increases the e_ectiveness of the aerofoil which would result in a higher or similar lift-to-drag ratio (even at the decreased angle of attacked require to maintain the turbine thrust coe_cient). The bene_t of this design is a atter power curve which causes the turbine to be less sensitive to uctuating winds. Also, the turbine has more torque at startup, allowing for operatation in lower wind speeds. This research is assumed to only be applicable to small wind turbines which operated in a low Reynolds number regime (<500 000), where Reynolds number manipulation is most advantageous.
- Full Text:
- Date Issued: 2017
Electrical power output estimation model for a conical diffuser augmented wind turbine
- Authors: Masukume, Peace-Maker
- Date: 2016
- Subjects: Wind power , Wind turbines , Renewable energy sources
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/1517 , vital:27404
- Description: Energy is integral to the quality of life of any society. However, meeting the demand for energy sustainably is the main challenge facing humanity. In general, non-renewable energy resources are used to supply the ever increasing energy demand. However, the extraction and processing of these resources is accompanied by the production of wastes which are a health hazard and impact negatively on climate change. Considering the finite nature of non-renewable sources, the environmental concerns which are associated with their usage and ensuring energy security, renewable energy sources have been brought in the energy supply chain. Wind energy is one of the renewable energy sources which has been supplying electrical energy to the ever increasing energy demand of humanity. Wind energy technology is a mature technology which over and above the bare (conventional) wind turbine technology has seen the development of duct augmented wind turbines. Ducts are used to encase wind turbine rotors to augment the power output of wind turbines especially in low wind speed areas. Though the technology has been under study for decades now, research indicates that there is no known model to estimate the power output of a diffuser augmented wind turbine. This thesis presents the development of the conical Diffuser Augmented Wind Turbine (DAWT) power output estimation model and its validation.
- Full Text:
- Date Issued: 2016
Statistical tools for wind energy generation
- Authors: Ndzukuma, Sibusiso
- Date: 2012
- Subjects: Wind power , Wind turbines , Winds -- Speed
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10580 , http://hdl.handle.net/10948/d1020627
- Description: In this study we conduct wind resource assessment to evaluate the annual energy production of a wind turbine. To estimate energy production of a wind turbine over a period of time, the power characteristics of the wind turbine are integrated with the probabilities of the wind speed expected at a chosen site. The first data set was obtained from a wind farm in Denmark. We propose several probability density functions to model the distribution of the wind speed. We use techniques from nonlinear regression analysis to model the power curve of a wind turbine. The best fit distribution model is assessed by performing numeric goodness–of–fit measures and graphical analyses. Johnson’s bounded (SB) distribution provides the best fit model with the smallest Kolmogorov–Smirnov (K-S) test statistic . 15. The four parameter logistic nonlinear regression (4PL) model is determined to provide the best fit to the power curve data, according to the Akaike Information Criterion (AIC) and the Bayesian Information Criterion (BIC). The estimated annual energy yield is compared to the actual production of the wind turbine. Our models underestimate the actual energy production by a 1 difference. In Chapter Six we conduct data processing, analyses and comparison of wind speed distributions using a data set obtained from a measuring wind mast mounted in Humansdorp, Eastern Cape. The expected annual energy production is estimated by using the certified power curve as provided by the manufacturer of the wind turbine under study. The commonly used Weibull distribution is determined to provide the best fit distribution model to our selected models. The annual energy yield is estimated at 7.33 GWh, with a capacity factor of 41.8 percent.
- Full Text:
- Date Issued: 2012
The development of an optimised rotor software design tool to improve performance of small horizontal axis wind turbines
- Authors: Newey, Kerryn Brett
- Date: 2012
- Subjects: Wind turbines -- Design , Wind power , Turbines -- Design
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9620 , http://hdl.handle.net/10948/d1009431 , Wind turbines -- Design , Wind power , Turbines -- Design
- Description: Horizontal axis wind turbines are by far the most common and well understood forms of wind turbine. Typically a large amount of research and development has been invested in the technology of large scale wind turbines. Unfortunately, development of small machines (rotor diameter smaller than 10 metres) has not been as forthcoming. The advantages of small turbines are that they are accessible to the individual consumer and they are a very attractive project for the home builder. The disadvantage of small turbines is that due to the negative influence of economies of scale, they tend to be costly in relation to their power output and suffer from a long-term return on investment. Furthermore, trends in the wind industry have shown that smaller machines tend to be relatively simple devices that have been developed with very little research and development. As a result, small turbines can be inefficient, unreliable and expensive to maintain. In many cases rotor design is less than optimal, with very little blade refinement. This is especially critical for small rotors due to low Reynolds Number operation. Further exacerbating the problem is that the rotors are typically not well matched to the generator. In many cases the machines are not suited to the wind speed range in which they are designed to operate, reducing the financial viability due to poor performance. It is envisaged that by applying optimising techniques and automating some of the design complexities into a software design tool, more cost-effective and viable machines can be developed that will deliver improved performance and therefore become more financially viable.
- Full Text:
- Date Issued: 2012
Development of a reciprocating aerofoil wind energy harvester
- Authors: Phillips, Russell Leslie
- Date: 2008
- Subjects: Windmills , Wind power , Wind turbines
- Language: English
- Type: Thesis , Doctoral , DTech
- Identifier: vital:9622 , http://hdl.handle.net/10948/899 , Windmills , Wind power , Wind turbines
- Description: Cross flow wind turbines are not unique. The performance of Savonius and Darrieus turbines is well documented. Both share the advantage of being able to accept fluid flow from any direction. The Savonius is drag based and hence has poor power output while the Darrieus is lift based. Due to the fact that the Darrieus has fixed blades the fluid flow through the rotor does not result in optimal lift being generated at all points in the rotation circle. A drawback of the Darrieus system is that it has to operate at a high tip-to wind-speed ratio to obtain reasonable performance with the fixed blades. Deviation from a small optimal range of tip speed ratios results in poor performance. The Darrieus also has poor starting torque. The research conducted in this project focused on overcoming the shortcomings of other turbines and developing an effective cross flow turbine capable of good performance. A number of different concepts were experimented with, however all were based on a symmetrical aerofoil presented to the actual relative airflow at an angle that would produce the highest lift force at all times. The lift force was then utilized to generate movement and to do work on an electrical generator. All concepts contemplated were researched to ascertain their appropriateness for the intended application. During development of the final experimental platform and after lodging of a provisional patent (RSA 2007/00927) it was ascertained that the design shared some similarities with an American patent 5503525 dated 28/4/1994. This patent employed complex electronic sensing and control equipment for control of blade angle. This was thought to be overly complex and costly, particularly for small scale wind energy generation applications and a simpler mechanical solution was sought in the design of the final experimental platform used in this project. The design of the mechanical control system was refined in an attempt to make it simpler, more durable and employ the least number of moving parts. Literature studies and patent searches conducted, suggested that the mechanical control system as developed for the final experimental platform was unique. The enormous variation in the power available from the wind at the different wind speeds likely to be encountered by the device necessitated some means of control. In high wind conditions control of the amount of wind power into the device was deemed to be the preferable means of control. A number of different concepts to achieve this were devised and tested. The final concept employed limited the tail angle deflection and hence the lift produced by the aerofoils. This resulted in a seamless “throttle” control allowing the device to be used in any wind strength by adjusting the control to a position that resulted in the device receiving a suitable amount of power from the wind. The outcome of performance tests conducted indicated that the device has the potential to be developed into a viable wind turbine for both small and large scale applications. The ability to control the power input from the wind to the machine from zero to a maximum is considered to be one of the most beneficial outcomes of this project and together with the quiet operation and low speed, are considered the main advantages of the device over existing wind turbine designs. The possibilities of using the device to compress air for energy storage are exciting avenues that warrant further research.
- Full Text:
- Date Issued: 2008