Potential use of carbon nanotubes as a nanofiller for natural rubber latex condoms
- Authors: Agbakoba, Victor Chike
- Date: 2018
- Subjects: Nanotubes , Rubber chemistry Nanocomposites (Materials) Nanostructured materials
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/23393 , vital:30538
- Description: The recent advancement in the field of nano-technology has raised much interest in the area of natural rubber latex (NRL) processing. This interest stems from the exceptional properties of nano-material and the promising results obtained by several researchers. Studies have shown that very low loadings of inorganic nanomaterials such as carbon nanotube (CNT) in NRL matrix leads to enhanced tensile strength, tensile modulus, tear resistance and aberration resistance. Thus providing a great prospect for reinforcement of thin film NRL articles such as condom. In this research, prevulcanised natural rubber latex (PvNRL) composite blends containing single walled carbon nanotubes (SWCNTs) were prepared via direct mixing. A progressive discolouration of PvNRL was observed with increased loadings of CNTs. Thermal analysis revealed faster drying rates for the composite blends containing SWCNT. Results from equilibrium swelling experiments also suggested a slight increase in crosslink density in the presence of SWCNT. There was a significant influence on flow behaviour of PvNRL as a result of varying loadings of SWCNT suspension. This was reflected as a change in pseudoplasticity and apparent viscosity. For Instance, apparent viscosity at a shear rate of 1 s-1 at 25°C for PvNRL with ~0.08% SWCNT was 2.5 Pa.s, compared to 0.49 Pa.s for the blends with 0.02% SWCNT. Condoms were moulded via the straight dipping technique using custom made glass formers. A series of dilutions was performed to correct the viscosity differences. This also ensured good consistency and promoted uniform deposition of PvNRL on the glass former. The average dimensions of the condoms produced in terms of length and width were ~191.17 ± 5.17 mm and 52.67 ± 5.17 mm respectively. Thickness measurement varied slightly according to the method of determination. The water leakage test suggested the absence of holes in the condoms produced. However, results from electrical leakage test contradicted those from water leak test. The results from infrared spectroscopy (FTIR) did not confirm the presence of chemical interactions between the SWCNT and PvNRL matrix. Glass transition temperature (Tg) was also unaffected across the blends. The stiffness (or modulus) was unaffected in all the condoms, as revealed by results from indentation hardness analysis. The SWCNT showed no significant influence on thermal decomposition temperatures of the condoms. Nonetheless, images from optical microscopy revealed increased surface roughness corresponding to higher loadings of SWCNT. Results from stress relaxation studies revealed improved retention of modulus under constant strain for condom samples containing SWCNT.
- Full Text:
- Date Issued: 2018
Nanostructures and metallophthalocyanines : applications in microbial fuel cells
- Authors: Edwards, Sean
- Date: 2011
- Subjects: Microbial fuel cells , Waste products as fuel , Nanostructured materials , Electrochemistry , Nanotubes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4107 , http://hdl.handle.net/10962/d1011742 , Microbial fuel cells , Waste products as fuel , Nanostructured materials , Electrochemistry , Nanotubes
- Description: Microbial fuel cells (MFCs) are a promising form of alternative energy capable of harnessing the potential energy stores in organic waste. The oxygen reduction reaction (ORR) forms an integral role in the generation of electricity in MFCs however it is also a potential obstacle in enhancing the performance of MFCs. Platinum, a commonly used catalyst for the ORR, is expensive and rare. Significant research has been conducted into developing alternative catalysts. Metallophthalocyanines (MPc) have garnered attention for use as catalysts. Iron phthalocyanine (FePc) has been shown to have catalytic activity towards the reduction of oxygen. Coupling of the catalyst to nanostructured carbon materials, such as multi-walled carbon nanotubes, has been observed to have several advantages as nanostructures have a high surface-to-volume ratio. In this study, we have attempted to assess the suitability of FePc, both its bulk and nanostructured form, as an oxygen reduction catalyst and acid functionalized multi-walled carbon nanotubes for use as a catalyst support using electrochemical techniques such as cyclic voltammetry and electrochemical impedance spectroscopy. We showed, for the first time, the catalytic nature of nanostructured FePc towards the ORR. Applying the data obtained from the electrochemical analyses, electrodes were modified using FePc and MWCNTs and applied to an Enterobacter cloacae-based MFC. Several operational parameters of the MFC, such as temperature and ionic strength, were optimized during the course of the study. We showed that optimized FePc:MWCNT-modified electrodes compared favourably to platinum-based electrodes in terms of power densities obtained in a microbial fuel cell.
- Full Text:
- Date Issued: 2011